@article{TranKreissigStaat2009,
  author    = {Tran, Thanh Ngoc and Kreißig, R. and Staat, Manfred},
  title     = {Probabilistic limit and shakedown analysis of thin plates and shells},
  series = {Structural safety. 31 (2009), H. 1},
  journal   = {Structural safety. 31 (2009), H. 1},
  publisher = {-},
  isbn      = {0167-4730},
  pages     = {1 -- 18},
  year      = {2009},
  language  = {en}
}
@article{StaatHeitzer2003,
  author    = {Staat, Manfred and Heitzer, M.},
  title     = {Probabilistic limit and shakedown problems},
  series = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.},
  journal   = {Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.},
  publisher = {John von Neumann Institute for Computing (NIC)},
  address   = {J{\"u}lich},
  isbn      = {3-00-010001-6},
  pages     = {217 -- 268},
  year      = {2003},
  language  = {en}
}
@article{Staat1992,
  author    = {Staat, Manfred},
  title     = {Probabilistische Bewertung des bruchmechanischen Verhaltens der Prim{\"a}rkreisdruckumschließung eines HTR-Moduls},
  year      = {1992},
  language  = {de}
}
@article{KernSchelthoffMathieu2011,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters},
  series = {Atmospheric Research. 104 (2011)},
  journal   = {Atmospheric Research. 104 (2011)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0169-8095},
  year      = {2011},
  language  = {en}
}
@article{KernSchelthoffMathieu2010,
  author    = {Kern, Alexander and Schelthoff, Christof and Mathieu, Moritz},
  title     = {Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters},
  pages     = {750-1 -- 750-8},
  year      = {2010},
  language  = {en}
}
@article{EngelmannPourshahidiShalabyetal.2022,
  author    = {Engelmann, Ulrich M. and Pourshahidi, Mohammad Ali and Shalaby, Ahmed and Krause, Hans-Joachim},
  title     = {Probing particle size dependency of frequency mixing magnetic detection with dynamic relaxation simulation},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {563},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {In progress, Art. No. 169965},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2022.169965},
  year      = {2022},
  abstract  = {Biomedical applications of magnetic nanoparticles (MNP) fundamentally rely on the particles' magnetic relaxation as a response to an alternating magnetic field. The magnetic relaxation complexly depends on the interplay of MNP magnetic and physical properties with the applied field parameters. It is commonly accepted that particle core size is a major contributor to signal generation in all the above applications, however, most MNP samples comprise broad distribution spanning nm and more. Therefore, precise knowledge of the exact contribution of individual core sizes to signal generation is desired for optimal MNP design generally for each application. Specifically, we present a magnetic relaxation simulation-driven analysis of experimental frequency mixing magnetic detection (FMMD) for biosensing to quantify the contributions of individual core size fractions towards signal generation. Applying our method to two different experimental MNP systems, we found the most dominant contributions from approx. 20 nm sized particles in the two independent MNP systems. Additional comparison between freely suspended and immobilized MNP also reveals insight in the MNP microstructure, allowing to use FMMD for MNP characterization, as well as to further fine-tune its applicability in biosensing.},
  language  = {en}
}
@article{ElbersMuratyan1991,
  author    = {Elbers, Gereon and Muratyan, Simone},
  title     = {Problematik verkehrsbezogener Außenluftmessungen von Partikeln (Dieselruß)},
  series = {+ Krebserzeugende Stoffe in der Umwelt : Herkunft, Messung, Risiko, Minimierung ; Kolloquium Mannheim, 23. bis 25. April 1991 / Kommission Reinhaltung der Luft im VDI und DIN},
  journal   = {+ Krebserzeugende Stoffe in der Umwelt : Herkunft, Messung, Risiko, Minimierung ; Kolloquium Mannheim, 23. bis 25. April 1991 / Kommission Reinhaltung der Luft im VDI und DIN},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-090888-2},
  pages     = {143},
  year      = {1991},
  language  = {de}
}
@article{Lohr1998,
  author    = {Lohr, J{\"u}rgen},
  title     = {Probleme der Multimedia Dienste im nationalen und internationalen Umfeld},
  year      = {1998},
  abstract  = {In: Telekom-Praxis. Ausgabe 1998. 25 S.},
  subject      = {Multimediamarkt},
  language  = {de}
}
@article{Helsper1995,
  author    = {Helsper, Christoph},
  title     = {Probleme der Staubprobenahme bei der Filterpr{\"u}fung},
  series = {Filtrieren und Separieren (1995)},
  journal   = {Filtrieren und Separieren (1995)},
  isbn      = {0933-5927},
  pages     = {5 -- 13},
  year      = {1995},
  language  = {de}
}
@article{Balzer1977,
  author    = {Balzer, Hermann},
  title     = {Probleme des Finanzmanagements in Zeiten der Inflation},
  series = {Semesterbericht / Institut f{\"u}r Kredit- und Finanzwirtschaft ; Verein zur F{\"o}rderung des Instituts f{\"u}r Kredit- und Finanzwirtschaft e.V. in der Gesellschaft der Freunde der Ruhr-Universit{\"a}t Bochum e.V. ; Seminar f{\"u}r Angewandte Wirtschaftslehre insbesondere (1977)},
  journal   = {Semesterbericht / Institut f{\"u}r Kredit- und Finanzwirtschaft ; Verein zur F{\"o}rderung des Instituts f{\"u}r Kredit- und Finanzwirtschaft e.V. in der Gesellschaft der Freunde der Ruhr-Universit{\"a}t Bochum e.V. ; Seminar f{\"u}r Angewandte Wirtschaftslehre insbesondere (1977)},
  publisher = {Inst.},
  address   = {Bochum-Querenburg},
  pages     = {8},
  year      = {1977},
  language  = {de}
}
@article{HeinrichsWeck1979,
  author    = {Heinrichs, Horst and Weck, M.},
  title     = {Problemloesungen im Rahmen der konstruktiven Gestaltung},
  series = {Industrieanzeiger. 101 (1979), H. 73},
  journal   = {Industrieanzeiger. 101 (1979), H. 73},
  pages     = {26 -- 29},
  year      = {1979},
  language  = {de}
}
@article{Staat1996,
  author    = {Staat, Manfred},
  title     = {Problems and Chances for Probabilistic Fracture Mechanics in the Analysis of Steel Pressure Boundary Reliability},
  series = {Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in J{\"u}lich, 21-24 November 1994},
  journal   = {Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in J{\"u}lich, 21-24 November 1994},
  address   = {Vienna},
  pages     = {43 -- 55},
  year      = {1996},
  language  = {en}
}
@article{TuegBaumann1994,
  author    = {T{\"u}g, Helmut and Baumann, Marcus},
  title     = {Problems of UV-B radiation measurements in biological research : critical remarks on current techniques and suggestions for improvements},
  series = {Geophysical research letters},
  volume    = {Vol. 21},
  journal   = {Geophysical research letters},
  number    = {Iss. 8},
  issn      = {1944-8007 (E-Journal); 0094-8276 (Print)},
  pages     = {689 -- 692},
  year      = {1994},
  language  = {en}
}
@article{HeuermannSchiek1993,
  author    = {Heuermann, Holger and Schiek, B.},
  title     = {Procedures for the Determination of the Scattering Parameters for Network Analyzer Calibration},
  series = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  journal   = {IEEE transactions on instrumentation and measurement : IM / Institute of Electrical and Electronics Engineers, Instrumentation and Measurement Group. 42 (1993), H. 2},
  isbn      = {0018-9456},
  pages     = {528 -- 531},
  year      = {1993},
  language  = {en}
}
@article{SchifferFerreinLakemeyer2010,
  author    = {Schiffer, Stefan and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  series = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  journal   = {Proceedings of the Fourth International Conference on Intelligent Robotics and Applications (ICIRA 2011)},
  pages     = {1 -- 10},
  year      = {2010},
  language  = {en}
}
@article{GerigkBujnickiGanpoNkwenkwaetal.2002,
  author    = {Gerigk, M. and Bujnicki, R. and Ganpo-Nkwenkwa, E. and Bongaerts, Johannes and Sprenger, G. and Takors, Ralf},
  title     = {Process control for enhanced L-phenylalanine production using different recombinant Escherichia coli strains},
  series = {Biotechnology and bioengineering},
  volume    = {Vol. 80},
  journal   = {Biotechnology and bioengineering},
  number    = {Iss. 7},
  issn      = {1097-0290 (E-Journal); 0006-3592 (Print)},
  pages     = {746 -- 754},
  year      = {2002},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications},
  series = {International Journal of Applied Ceramic Technology},
  volume    = {12},
  journal   = {International Journal of Applied Ceramic Technology},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  isbn      = {1744-7402},
  doi       = {10.1111/ijac.12326},
  pages     = {46 -- 52},
  year      = {2015},
  language  = {en}
}
@article{KluczkaEcksteinAlexopoulosetal.2014,
  author    = {Kluczka, Sven and Eckstein, Julian and Alexopoulos, Spiros and Vaeßen, Christiane and Roeb, Martin},
  title     = {Process simulation for solar steam and dry reforming},
  series = {Energy procedia : Proceedings of the SolarPACES 2013 International Conference},
  volume    = {49},
  journal   = {Energy procedia : Proceedings of the SolarPACES 2013 International Conference},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1876-6102 (E-Journal)},
  doi       = {10.1016/j.egypro.2014.03.092},
  pages     = {850 -- 859},
  year      = {2014},
  abstract  = {In co-operation with the German Aerospace Center, the Solar-Institut J{\"u}lich has been analyzing the different technologies that are available for methanol production from CO2 using solar energy. The aim of the project is to extract CO2 from industrial exhaust gases or directly from the atmosphere to recycle it by use of solar energy. Part of the study was the modeling and simulating of a methane reformer for the production of synthesis gas, which can be operated by solar or hybrid heat sources. The reformer has been simplified in such a way that the model is accurate and enables fast calculations. The developed pseudo-homogeneous one- dimensional model can be regarded as a kind of counter-current heat exchanger and is able to incorporate a steam reforming reaction as well as a dry reforming reaction.},
  language  = {en}
}
@article{KoppSchmeetsGosauetal.2019,
  author    = {Kopp, Alexander and Schmeets, Ralf and Gosau, Martin and Friedrich, Reinhard E. and Fuest, Sandra and Behbahani, Mehdi and Barbeck, Mike and Rutkowski, Rico and Burg, Simon and Kluwe, Lan and Henningsen, Anders},
  title     = {Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application},
  series = {In Vivo},
  volume    = {33},
  journal   = {In Vivo},
  number    = {3},
  issn      = {1791-7549},
  doi       = {10.21873/invivo.11536},
  pages     = {757 -- 762},
  year      = {2019},
  language  = {en}
}
@article{Hillen1980,
  author    = {Hillen, Walter},
  title     = {Production and properties of the \&\#964;-lepton in e+e\&\#8722; annihilation at C.M. energies from 12 to 31.6 GeV. TASSO Collaboration},
  series = {Physics Letters B. 92 (1980), H. 1-2},
  journal   = {Physics Letters B. 92 (1980), H. 1-2},
  isbn      = {0370-2693},
  pages     = {199 -- 205},
  year      = {1980},
  language  = {en}
}
@article{KhedimSchwarzerFaberetal.2004,
  author    = {Khedim, Ahmed and Schwarzer, Klemens and Faber, Christian and M{\"u}ller, Christoph},
  title     = {Production d{\´e}centralis{\´e}e de l'eau potable {\`a} l'{\´e}nergie solaire},
  series = {Desalination. 168 (2004), H. 1-3},
  journal   = {Desalination. 168 (2004), H. 1-3},
  isbn      = {0011-9164},
  pages     = {13 -- 20},
  year      = {2004},
  language  = {en}
}
@article{MuesgenanntKoersMcNeilRadchenkoetal.2023,
  author    = {Mues genannt Koers, Lucas and McNeil, S. W. and Radchenko, V. and Paulßen, Elisabeth and Hoehr, Cornelia},
  title     = {Production of Co-58m in a siphon-style liquid target on a medical cyclotron},
  volume    = {195},
  number    = {Art. 110734},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0969-8043},
  doi       = {10.1016/j.apradiso.2023.110734},
  year      = {2023},
  abstract  = {We present the production of 58mCo on a small, 13 MeV medical cyclotron utilizing a siphon style liquid target system. Different concentrated iron(III)-nitrate solutions of natural isotopic distribution were irradiated at varying initial pressures and subsequently separated by solid phase extraction chromatography. The radio cobalt (58m/gCo and 56Co) was successfully produced with saturation activities of (0.35 ± 0.03) MBq μA-1 for 58mCo with a separation recovery of (75 ± 2) \% of cobalt after one separation step utilizing LN-resin.},
  language  = {en}
}
@article{BiselliBornWandrey1995,
  author    = {Biselli, Manfred and Born, C. and Wandrey, C.},
  title     = {Production of monoclonal antibodies in a pilot scale fluidized bed bioreactor / Born, C.; Biselli, M.; Wandrey, C.},
  series = {Animal cell technology : developments towards the 21st century / edited by E. C. Beuvery},
  journal   = {Animal cell technology : developments towards the 21st century / edited by E. C. Beuvery},
  publisher = {Kluwer Acad. Press},
  address   = {Dordrecht},
  isbn      = {0-7923-3736-0},
  pages     = {515 -- 519},
  year      = {1995},
  language  = {en}
}
@article{PaulssenHoehrHouetal.2015,
  author    = {Paulßen, Elisabeth and Hoehr, Cornelia and Hou, Xinchi and Hanemaayer, Victoire and Zeisler, Stefan and Adam, Michael J. and Ruth, Thomas J. and Celler, Anna and Buckley, Ken and Benard, Francois and Schaffer, Paul},
  title     = {Production of Y-86 and other radiometals for research purposes using a solution target system},
  series = {Nuclear medicine and biology},
  volume    = {42},
  journal   = {Nuclear medicine and biology},
  number    = {11},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-9614},
  doi       = {10.1016/j.nucmedbio.2015.06.005},
  pages     = {842 -- 849},
  year      = {2015},
  language  = {en}
}
@article{PauksztatKuperjansMeyer2005,
  author    = {Pauksztat, Anja and Kuperjans, Isabel and Meyer, J{\"o}rg},
  title     = {Produktbezogene Referenzwerte f{\"u}r Energieeffizienz und CO2-Emissionen},
  series = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  volume    = {55},
  journal   = {Energiewirtschaftliche Tagesfragen : et ; Zeitschrift f{\"u}r Energiewirtschaft, Recht, Technik und Umwelt},
  number    = {6},
  issn      = {0013-743X},
  pages     = {374 -- 376},
  year      = {2005},
  language  = {de}
}
@article{Hirschberg2000,
  author    = {Hirschberg, Rainer},
  title     = {Produktdatenaustausch in der TGA nach VDI-Richtlinien},
  series = {Technik am Bau. TAB ; Organ des Bundesindustrieverbandes Heizungs-, Klima-, Sanit{\"a}rtechnik, Technische Geb{\"a}udesysteme e.V. ; Fachzeitschrift f{\"u}r technische Geb{\"a}udeausr{\"u}stung. 31 (2000), H. 10},
  journal   = {Technik am Bau. TAB ; Organ des Bundesindustrieverbandes Heizungs-, Klima-, Sanit{\"a}rtechnik, Technische Geb{\"a}udesysteme e.V. ; Fachzeitschrift f{\"u}r technische Geb{\"a}udeausr{\"u}stung. 31 (2000), H. 10},
  isbn      = {0341-2032},
  pages     = {14 -- 16},
  year      = {2000},
  language  = {de}
}
@article{Hirschberg2001,
  author    = {Hirschberg, Rainer},
  title     = {Produktdatenaustausch in der TGA nach VDI-Richtlinien. Standardisierte Informationswege},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 52 (2001), H. 3},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 52 (2001), H. 3},
  isbn      = {1436-5103},
  pages     = {52 -- 54},
  year      = {2001},
  language  = {de}
}
@article{Timme2000,
  author    = {Timme, Michael},
  title     = {Produkthaftung: Eigentumsverletzung bei Verarbeitung mangelhafter Zulieferteile- („Transistoren-Urteil")},
  series = {Juristische Schulung (2000)},
  journal   = {Juristische Schulung (2000)},
  pages     = {1154 -- 1158},
  year      = {2000},
  language  = {de}
}
@article{HoettgesArnoldRouve1992,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Profiles of Mixing Coefficient in Compound Open Channel},
  series = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]},
  journal   = {Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]},
  publisher = {Hemisphere Publ. Corp.},
  address   = {Washington, DC [u.a.]},
  isbn      = {1-56032-209-8},
  pages     = {XVII, 773 S. : graph. Darst.},
  year      = {1992},
  language  = {en}
}
@article{HavermannSeilerGeorgesetal.2008,
  author    = {Havermann, Marc and Seiler, F. and Georges, A. and Srulijes, J.},
  title     = {Progress in Doppler picture velocimetry (DPV) / Seiler, F. ; George, A. ; Srulijes, J. ; Havermann, M.},
  series = {Experiments in Fluids. 44 (2008), H. 3},
  journal   = {Experiments in Fluids. 44 (2008), H. 3},
  publisher = {-},
  isbn      = {1432-1114},
  pages     = {389 -- 395},
  year      = {2008},
  language  = {en}
}
@article{Stulpe2009,
  author    = {Stulpe, Werner},
  title     = {Projection},
  series = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  journal   = {Compendium of Quantum Physics : concepts, experiments, history and philosophy / Daniel Greenberger ... ed.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-70622-9},
  pages     = {497 -- 499},
  year      = {2009},
  language  = {en}
}
@article{HoehnePulz2009,
  author    = {H{\"o}hne, Tim and Pulz, Christian},
  title     = {Projekt Adaptive Logistik : Dienstleister f{\"u}r die Montage in der Auftragsfertigung},
  series = {RFID-Innovationen in Produktion und Logistik - Eine Analyse zu Potenzialen des RFID-Einsatzes in Produktion und Logistik},
  journal   = {RFID-Innovationen in Produktion und Logistik - Eine Analyse zu Potenzialen des RFID-Einsatzes in Produktion und Logistik},
  editor    = {Isensee, Johannes},
  issn      = {1860-840X},
  pages     = {11 -- 19},
  year      = {2009},
  language  = {de}
}
@article{SchulteZurhausen2000,
  author    = {Schulte-Zurhausen, Manfred},
  title     = {Projektantrags- und -bewertungsverfahren im Unternehmen : Ablauf, Beteiligte und Entscheidungskriterien},
  series = {Betriebs- und Arbeitsorganisation im Wandel der Zeit},
  journal   = {Betriebs- und Arbeitsorganisation im Wandel der Zeit},
  publisher = {T{\"U}V-Verl.},
  address   = {K{\"o}ln},
  isbn      = {3-8249-0603-1},
  pages     = {101 -- 114},
  year      = {2000},
  language  = {de}
}
@article{JacobsBerseKlothetal.1993,
  author    = {Jacobs, Stephan and Berse, Holger and Kloth, Matthias and Mittrach, Silke},
  title     = {Projektbeschreibung: CSCW in Designumgebungen / Holger Berse, Stephan Jacobs, Matthias Kloth, Silke Mittrach},
  series = {Workshop "Unterst{\"u}tzung organisatorischer Prozesse durch CSCW" : 4. - 5. November 1993, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster / [Institut f{\"u}r Wirtschaftsinformatik, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster]. Stefan Kirn ... (Hrsg.)},
  journal   = {Workshop "Unterst{\"u}tzung organisatorischer Prozesse durch CSCW" : 4. - 5. November 1993, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster / [Institut f{\"u}r Wirtschaftsinformatik, Westf{\"a}lische Wilhelms-Universit{\"a}t M{\"u}nster]. Stefan Kirn ... (Hrsg.)},
  address   = {M{\"u}nster},
  pages     = {90 S. : graph. Darst.},
  year      = {1993},
  language  = {de}
}
@article{PietschKurbel1988,
  author    = {Pietsch, Wolfram and Kurbel, K.},
  title     = {Projektmanagement bei einer Expertensystementwicklung / Kurbel, K., Pietsch, W.},
  series = {Information management : IM ; Praxis, Ausbildung u. Forschung d. Wirtschaftsinformatik. 3 (1988), H. 1},
  journal   = {Information management : IM ; Praxis, Ausbildung u. Forschung d. Wirtschaftsinformatik. 3 (1988), H. 1},
  isbn      = {0930-5181},
  pages     = {6 -- 13},
  year      = {1988},
  language  = {de}
}
@article{KurbelPietsch1987,
  author    = {Kurbel, K. and Pietsch, Wolfram},
  title     = {Projektmanagement bei Expertensystem-Entwicklungen},
  series = {Arbeitsberichte des Lehrstuhls f{\"u}r Betriebsinformatik / Lehrstuhl f{\"u}r Betriebsinformatik, Fachbereich Wirtschafts- und Sozialwissenschaften, Universit{\"a}t Dortmund},
  journal   = {Arbeitsberichte des Lehrstuhls f{\"u}r Betriebsinformatik / Lehrstuhl f{\"u}r Betriebsinformatik, Fachbereich Wirtschafts- und Sozialwissenschaften, Universit{\"a}t Dortmund},
  number    = {H. November},
  pages     = {1 -- 21},
  year      = {1987},
  language  = {de}
}
@article{Starck2007,
  author    = {Starck, Andreas},
  title     = {Projektsteuerung contra Architektengrundleistung oder wer steuert das Baugeschehen?},
  year      = {2007},
  abstract  = {Sieht man sich die umfangreichen Bet{\"a}tigungsfelder f{\"u}r einen Projektsteuerer in den Publikationen der einschl{\"a}gigen Verb{\"a}nde und der Anbieter etwas genauer an, so wird man feststellen, das nach der eigentlichen Projektvorbereitungsphase mit Wirtschaftlichkeitsberechnungen und Sicherstellung der Finanzierung erhebliche {\"U}berschneidungen zu den in der HOAI ausgewiesenen T{\"a}tigkeiten der weiteren Planungsbeteiligten, insbesondere des Geb{\"a}udeplaners, also des Architekten bestehen. Geht man nun davon aus, dass der Bauherr diese Leistungen nicht doppelt bezahlen will, w{\"a}re die logische Konsequenz aus der vollumf{\"a}nglichen Beauftragung eines Projektsteuerers die Verminderung des Auftragsumfangs an den Architekten, verbunden mit einer Honorarminderung f{\"u}r den Architekten. Damit bricht dem Architekten bei eingehender Betrachtung am Ende mehr als die H{\"a}lfte seiner T{\"a}tigkeit und damit seiner Grundlage zur Honorarerzielung weg. Der Bauherr muss in erster Linie seine W{\"u}nsche definieren und sein Budget bestimmen. Er beauftragt die Planungsbeteiligten und nimmt deren Leistungen entgegen. Sein Problem dabei ist, dass er diese Leistung nicht beurteilen kann, weder in Bezug auf deren Vollst{\"a}ndigkeit, noch in Bezug auf deren Inhalt. Hier steht der Projektsteuerer im eigentlichen Sinne. Er muss wissen, was die Planungsbeteiligten f{\"u}r ihr Geld zu leisten haben und wie er diese Leistungen durchsetzen kann. Letztendlich sorgt er dann aber auch daf{\"u}r, das die Architektenleistungen, also Planung und Ausschreibungsunterlagen vom Bauherrn verstanden werden. Warum aber kann der Architekt selbst seine Leistungen und damit den Nachweis der Leistungserf{\"u}llung nicht selbst dem Bauherrn verst{\"a}ndlich und damit glaubhaft machen? Es liegt also letztlich in der Hand der Architekten, ob ihr Bet{\"a}tigungsfeld weiter durch in die Planung und Gestaltung eingreifende, zus{\"a}tzliche Projektsteuerer und Generalunternehmer eingeengt oder sogar weggenommen werden kann. Die Frage, wer das Baugeschehen steuert und lenkt bleibt solange ungekl{\"a}rt, wie die Architekten dieses T{\"a}tigkeitsfeld des Architekten im Baubetrieb weiterhin nur unzul{\"a}nglich ausf{\"u}llen k{\"o}nnen und wollen.},
  language  = {de}
}
@article{HackerKraftZoell2011,
  author    = {Hacker, Tobias and Kraft, Bodo and Z{\"o}ll, Axel},
  title     = {Projektzuschnitt f{\"u}r die inkrementelle Systementwicklung im Konzernverbund},
  isbn      = {978-3-8322-9990-3},
  pages     = {78 -- 83},
  year      = {2011},
  language  = {de}
}
@article{JiminezGermanBehbahaniMiettinenetal.2013,
  author    = {Jiminez German, Salvador and Behbahani, Mehdi and Miettinen, Susanna and Grijpma, Dirk W. and Haimi, Suvi P.},
  title     = {Proliferation and differentiation of adipose stem cells towards smooth muscle cells on poly(trimethylene carbonate) membranes},
  series = {Macromolecular symposia},
  volume    = {Vol. 334},
  journal   = {Macromolecular symposia},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {0258-0322},
  pages     = {133 -- 142},
  year      = {2013},
  language  = {en}
}
@article{StulpeRuch1998,
  author    = {Stulpe, Werner and Ruch, Ernst},
  title     = {Proof of the Mixing Theorem for Statistical Systems in Classical Physics. Ruch, Ernst; Stulpe, Werner},
  series = {Acta Applicandae Mathematicae. 53 (1998), H. 3},
  journal   = {Acta Applicandae Mathematicae. 53 (1998), H. 3},
  isbn      = {1572-9036},
  pages     = {329 -- 352},
  year      = {1998},
  language  = {en}
}
@article{SelmerAchebachUnden2005,
  author    = {Selmer, Thorsten and Achebach, Stephanie and Unden, Gottfried},
  title     = {Properties and significance of apoFNR as a second form of air-inactivated [4Fe-4S]·FNR of Escherichia coli / Achebach, S. ; Selmer, T. ; Unden, G.},
  series = {The FEBS Journal. 272 (2005), H. 16},
  journal   = {The FEBS Journal. 272 (2005), H. 16},
  isbn      = {1742-464X},
  pages     = {4260 -- 4269},
  year      = {2005},
  language  = {en}
}
@article{Hillen1979,
  author    = {Hillen, Walter},
  title     = {Properties of hadron final states in e+e\&\#8722; annihilation at 13 GeV and 17 GeV center of mass energies. TASSO Collaboration},
  series = {Physics Letters B. 83 (1979), H. 2},
  journal   = {Physics Letters B. 83 (1979), H. 2},
  isbn      = {0370-2693},
  pages     = {261 -- 266},
  year      = {1979},
  language  = {en}
}
@article{FoersterKordosRuders1997,
  author    = {F{\"o}rster, Arnold and Kordos, P. and Ruders, F.},
  title     = {Properties of LT MBE GaAs for photomixing up to THz frequencies / P. Kordos ; F. Ruders ; M. Marso ; A. F{\"o}rster},
  series = {Proceedings : 8 - 11 December 1996, Australian National University, Canberra, Australia / ed.: C. Jagadish},
  journal   = {Proceedings : 8 - 11 December 1996, Australian National University, Canberra, Australia / ed.: C. Jagadish},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-3374-8},
  pages     = {71 -- ff.},
  year      = {1997},
  language  = {en}
}
@article{FoersterLachenmannKastalsky1997,
  author    = {F{\"o}rster, Arnold and Lachenmann, S. G. and Kastalsky, A.},
  title     = {Properties of Nb/InAs/Nb hybrid step junctions / S. G. Lachenmann ; A. Kastalsky ; I. Friedrich ; A. F{\"o}rster ...},
  series = {Journal of low temperature physics. 106 (1997), H. 3-4},
  journal   = {Journal of low temperature physics. 106 (1997), H. 3-4},
  isbn      = {0022-2291},
  pages     = {321 -- 326},
  year      = {1997},
  language  = {en}
}
@article{MuellerVeggianNeskakisLiederetal.1982,
  author    = {M{\"u}ller-Veggian, Mattea and Neskakis, A. and Lieder, R. M. and Beuscher, H.},
  title     = {Properties of side bands observed in ¹⁸⁰ Os},
  series = {Zeitschrift f{\"u}r Physik / A, Hadrons and nuclei. 304 (1982), H. 3},
  journal   = {Zeitschrift f{\"u}r Physik / A, Hadrons and nuclei. 304 (1982), H. 3},
  isbn      = {1431-5831},
  pages     = {277 -- 278},
  year      = {1982},
  language  = {en}
}
@article{SelmerWillanzheimerHetzel2002,
  author    = {Selmer, Thorsten and Willanzheimer, Angela and Hetzel, Marc},
  title     = {Propionate CoA-transferase from Clostridium propionicum. Cloning of the gene and identification of glutamate 324 at the active site},
  series = {European Journal of Biochemistry. 269 (2002), H. 1},
  journal   = {European Journal of Biochemistry. 269 (2002), H. 1},
  isbn      = {0014-2956},
  pages     = {372 -- 380},
  year      = {2002},
  language  = {en}
}
@article{SiepmannSchuhLevering1998,
  author    = {Siepmann, Thomas and Schuh, G. and Levering, V.},
  title     = {PROPLAN / Schuh, G.; Siepmann, Th.; Levering, V.},
  series = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)},
  journal   = {Handbook on architectures of information systems : with 24 tables / Peter Bernus ... (ed.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-64453-9},
  pages     = {IX, 834 S. : graph. Darst.},
  year      = {1998},
  language  = {en}
}
@article{NiemuellerLakemeyerFerreinetal.2013,
  author    = {Niem{\"u}ller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander and Reuter, S. and Ewert, D. and Jeschke, S. and Pensky, D. and Karras, Ulrich},
  title     = {Proposal for advancements to the LLSF in 2014 and beyond},
  pages     = {Publ. online},
  year      = {2013},
  language  = {en}
}
@article{BlomeSeboldtDachwaldetal.2004,
  author    = {Blome, Hans-Joachim and Seboldt, Wolfgang and Dachwald, Bernd and Richter, Lutz},
  title     = {Proposal for an integrated European Space Exploration Study},
  series = {Space Debris and Space Traffic Management Symposium 2004 : proceedings of the International Academy of Astronautics Space Debris and Space Traffic Management Symposium, held in conjunction with the 55th International Astronautical Congress (IAC), October 4 - 8, 2004, Vancouver, British Columbia, Canada / ed. by Joerg Bendisch},
  journal   = {Space Debris and Space Traffic Management Symposium 2004 : proceedings of the International Academy of Astronautics Space Debris and Space Traffic Management Symposium, held in conjunction with the 55th International Astronautical Congress (IAC), October 4 - 8, 2004, Vancouver, British Columbia, Canada / ed. by Joerg Bendisch},
  publisher = {Univelt},
  address   = {San Diego, Calif.},
  isbn      = {0-87703-523-7},
  pages     = {XI, 432 S. : Ill., graph. Darst.},
  year      = {2004},
  language  = {en}
}
@article{DigelZerlinTemizArtmannetal.2007,
  author    = {Digel, Ilya and Zerlin, Kay and Temiz Artmann, Ayseg{\"u}l and Engels, S.},
  title     = {Protein dynamics in thermosensation},
  series = {Regenerative medicine. 2 (2007), H. 5},
  journal   = {Regenerative medicine. 2 (2007), H. 5},
  isbn      = {1746-0751},
  pages     = {533 -- 533},
  year      = {2007},
  language  = {en}
}
@article{DellmannGloriusLitvinovetal.2023,
  author    = {Dellmann, Sophia Florence and Glorius, J. and Litvinov, Yu A. and Reifarth, R. and Al-Khasawneh, Kafa and Aliotta, M. and Bott, L. and Br{\"u}ckner, Benjamin and Bruno, C. G. and Chen, Ruijiu and Davinson, T. and Dickel, T. and Dillmann, Iris and Dmytriev, D. and Erbacher, P. and Freire-Fern{\´a}ndez, D. and Forstner, Oliver and Geissel, H. and G{\"o}bel, K. and Griffin, Christopher J. and Grisenti, R. and Gumberidze, Alexandre and Haettner, Emma and Hagmann, Siegbert and Heil, M. and Heß, R. and Hillenbrand, P.-M. and Joseph, R. and Jurado, B. and Kozhuharov, Christophor and Kulikov, I. and L{\"o}her, Bastian and Langer, Christoph and Leckenby, Guy and Lederer-Woods, C. and Lestinsky, M. and Litvinov, S. A. and Lorenz, B. A. and Lorenz, E. and Marsh, J. and Menz, Esther Babette and Morgenroth, T. and Petridis, N. and Pibernat, Jerome and Popp, U. and Psaltis, Athanasios and Sanjari, Shahab and Scheidenberger, C. and Sguazzin, M. and Sidhu, Ragandeep Singh and Spillmann, Uwe and Steck, M. and St{\"o}hlker, T. and Surzhykov, A. and Swartz, J. A. and T{\"o}rnqvist, H. and Varga, L. and Vescovi, Diego and Weick, H. and Weigand, M. and Woods, P. and Xing, Y. and Yamaguchi, Taiyo},
  title     = {Proton capture on stored radioactive ¹¹⁸Te ions},
  series = {EPJ Web of Conferences},
  volume    = {279},
  journal   = {EPJ Web of Conferences},
  number    = {Article Number: 11018},
  publisher = {EDP Sciences},
  issn      = {2100-014X},
  doi       = {10.1051/epjconf/202327911018},
  pages     = {1 -- 5},
  year      = {2023},
  abstract  = {Experimental determination of the cross sections of proton capture on radioactive nuclei is extremely difficult. Therefore, it is of substantial interest for the understanding of the production of the p-nuclei. For the first time, a direct measurement of proton-capture cross sections on stored, radioactive ions became possible in an energy range of interest for nuclear astrophysics. The experiment was performed at the Experimental Storage Ring (ESR) at GSI by making use of a sensitive method to measure (p,γ) and (p,n) reactions in inverse kinematics. These reaction channels are of high relevance for the nucleosyn-thesis processes in supernovae, which are among the most violent explosions in the universe and are not yet well understood. The cross section of the ¹¹⁸Te(p,γ) reaction has been measured at energies of 6 MeV/u and 7 MeV/u. The heavy ions interacted with a hydrogen gas jet target. The radiative recombination process of the fully stripped ¹¹⁸Te ions and electrons from the hydrogen target was used as a luminosity monitor. An overview of the experimental method and preliminary results from the ongoing analysis will be presented.},
  language  = {en}
}
@article{KlompBitzHeerschapetal.2009,
  author    = {Klomp, D. W. J. and Bitz, Andreas and Heerschap, A. and Scheenen, T. W. J.},
  title     = {Proton spectroscopic imaging of the human prostate at 7 T},
  series = {NMR in Biomedicine},
  volume    = {22},
  journal   = {NMR in Biomedicine},
  number    = {5},
  issn      = {1099-1492},
  doi       = {10.1002/nbm.1360},
  pages     = {495 -- 501},
  year      = {2009},
  language  = {en}
}
@article{MuellerVeggianGuevenJulinetal.1988,
  author    = {M{\"u}ller-Veggian, Mattea and Gueven, H. and Julin, R. and Lach, M},
  title     = {Proton- and neutron H 11/2 excitations in 63 141 Eu 78},
  series = {Zeitschrift f{\"u}r Physik / A, Hadrons and nuclei. 330 (1988), H. 4},
  journal   = {Zeitschrift f{\"u}r Physik / A, Hadrons and nuclei. 330 (1988), H. 4},
  isbn      = {1431-5831},
  pages     = {437 -- 438},
  year      = {1988},
  language  = {en}
}
@article{MuellerVeggianGuevenLachetal.1988,
  author    = {M{\"u}ller-Veggian, Mattea and Gueven, H. and Lach, M. and Styczen, J.},
  title     = {Proton- and neutron h 11/2 exitations in ¹⁴¹ Eu},
  series = {Annual report 1987 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Gr{\"u}mmer, F. (Hrsg.) . - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 442)},
  journal   = {Annual report 1987 / Kernforschungsanlage J{\"u}lich Institut f{\"u}r Kernphysik / Gr{\"u}mmer, F. (Hrsg.) . - (Spezielle Berichte der Kernforschungsanlage J{\"u}lich ; 442)},
  publisher = {Verlag des Forschungszentrums J{\"u}lich},
  address   = {J{\"u}lich},
  pages     = {43},
  year      = {1988},
  language  = {en}
}
@article{CollPeralesSchulteTiggesRondinoneetal.2022,
  author    = {Coll-Perales, Baldomero and Schulte-Tigges, Joschua and Rondinone, Michele and Gozalvez, Javier and Reke, Michael and Matheis, Dominik and Walter, Thomas},
  title     = {Prototyping and evaluation of infrastructure-assisted transition of control for cooperative automated vehicles},
  series = {IEEE Transactions on Intelligent Transportation Systems},
  volume    = {23},
  journal   = {IEEE Transactions on Intelligent Transportation Systems},
  number    = {7},
  publisher = {IEEE},
  issn      = {1524-9050 (Print)},
  doi       = {10.1109/TITS.2021.3061085},
  pages     = {6720 -- 6736},
  year      = {2022},
  abstract  = {Automated driving is now possible in diverse road and traffic conditions. However, there are still situations that automated vehicles cannot handle safely and efficiently. In this case, a Transition of Control (ToC) is necessary so that the driver takes control of the driving. Executing a ToC requires the driver to get full situation awareness of the driving environment. If the driver fails to get back the control in a limited time, a Minimum Risk Maneuver (MRM) is executed to bring the vehicle into a safe state (e.g., decelerating to full stop). The execution of ToCs requires some time and can cause traffic disruption and safety risks that increase if several vehicles execute ToCs/MRMs at similar times and in the same area. This study proposes to use novel C-ITS traffic management measures where the infrastructure exploits V2X communications to assist Connected and Automated Vehicles (CAVs) in the execution of ToCs. The infrastructure can suggest a spatial distribution of ToCs, and inform vehicles of the locations where they could execute a safe stop in case of MRM. This paper reports the first field operational tests that validate the feasibility and quantify the benefits of the proposed infrastructure-assisted ToC and MRM management. The paper also presents the CAV and roadside infrastructure prototypes implemented and used in the trials. The conducted field trials demonstrate that infrastructure-assisted traffic management solutions can reduce safety risks and traffic disruptions.},
  language  = {en}
}
@article{PietschKurbelLabentz1987,
  author    = {Pietsch, Wolfram and Kurbel, K. and Labentz, M.},
  title     = {Prototyping und Projektmanagement bei großen Entwicklungsteams / Kurbel, K., Labentz, M., Pietsch, W.},
  series = {Information management : IM ; Praxis, Ausbildung u. Forschung d. Wirtschaftsinformatik. 2 (1987), H. 1},
  journal   = {Information management : IM ; Praxis, Ausbildung u. Forschung d. Wirtschaftsinformatik. 2 (1987), H. 1},
  isbn      = {0930-5181},
  pages     = {6 -- 15},
  year      = {1987},
  language  = {en}
}
@article{NiemuellerFerreinEckeletal.2011,
  author    = {Niem{\"u}ller, Tim and Ferrein, Alexander and Eckel, Gerhard and Pirro, David and Podbregar, Patrick and Kellner, Tobias and Rath, Christoph and Steinbauer, Gerald},
  title     = {Providing Ground-truth Data for the Nao Robot Platform},
  series = {RoboCup 2010: Robot Soccer World Cup XIV},
  journal   = {RoboCup 2010: Robot Soccer World Cup XIV},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-642-20217-9},
  pages     = {133 -- 144},
  year      = {2011},
  language  = {en}
}
@article{HacklMuellerStaatetal.2016,
  author    = {Hackl, Michael and M{\"u}ller, Lars-Peter and Staat, Manfred and Kahmann, Stephanie Lucina and Wegmann, Kilian},
  title     = {Proximal phalangeal neck fractures of the hand — a biomechanical comparison of three fixation techniques},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {148 -- 149},
  year      = {2016},
  abstract  = {Plate osteosynthesis of displaced proximal phalangeal neck fractures of the hand allows early mobilization due to a stable internal fixation. Nevertheless, joint stiffness—because of soft tissue irritation—represents a common complication leading to high complication rates. Del Pinal et al. recently reported promising clinical results for a new, minimally invasive fixation technique with a cannulated headless intramedullary compression screw. Hence, the aim of this study was to compare plate fixation of proximal phalangeal neck fractures to less two less invasive techniques: Crossed k-wire fixation and intramedullary screw fixation. We hypothesized that these fixation techniques provide inferior stability when compared to plate osteosynthesis.},
  language  = {en}
}
@article{LaackRefischOhnsorgeetal.1984,
  author    = {Laack, Walter van and Refisch, A. and Ohnsorge, J. and D{\"u}rselen, L.},
  title     = {Proximaler Femurteilersatz - Alternative zum Schaftwechsel zementfixierter H{\"u}ftendoprothesen},
  series = {Orthop{\"a}dische Praxis. 20 (1984), H. 11},
  journal   = {Orthop{\"a}dische Praxis. 20 (1984), H. 11},
  isbn      = {0030-588x},
  pages     = {856},
  year      = {1984},
  language  = {de}
}
@article{UlberPothMonzonetal.2010,
  author    = {Ulber, Roland and Poth, Sebastian and Monzon, Magaly and Tippk{\"o}tter, Nils},
  title     = {Prozessintegration von Hydrolyse und Fermentation von Cellulose- Faserstoff},
  series = {Chemie Ingenieur Technik},
  volume    = {82},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  issn      = {1522-2640},
  doi       = {10.1002/cite.200900103},
  pages     = {135 -- 139},
  year      = {2010},
  abstract  = {Ein viel versprechender erneuerbarer Rohstoff f{\"u}r die Produktion von Chemikalien und Treibstoffen ist Lignocellulose aus pflanzlicher Biomasse. Die darin enthaltenen Zucker k{\"o}nnen mittels enzymatischer Hydrolyse freigesetzt und fermentativ zu Ethanol umgesetzt werden. Ein interessanter Ansatz ist dabei die simultane Verzuckerung und Fermentation. Hefen und Enzyme haben mit 30 °C bzw. 50 °C zwar unterschiedliche Temperaturoptima, es konnte aber gezeigt werden, dass auch bei den niedrigeren Temperaturen eine Umsetzung der Cellulose zu Glucose erfolgt, wenn auch langsamer als bei optimalen Bedingungen. Außerdem konnte in Vorversuchen gezeigt werden, dass Ethanol in den zu erwartenden Konzentrationen keinen Einfluss auf die enzymatische Umsetzung hat.},
  language  = {de}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Prozessoptimierung des SLM-Prozesses mit hoch-reflektiven und thermisch sehr gut leitenden Materialien durch systematische Parameterfindung und begleitende Simulationen am Beispiel von Silber},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {9},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  number    = {1},
  publisher = {Fachhoschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-33639},
  pages     = {1 -- 14},
  year      = {2012},
  abstract  = {Additive Manufacturing durch Aufschmelzen von Metallpulvern hat sich auf breiter Front als Herstellverfahren, auch f{\"u}r Endprodukte, etabliert. Besonders f{\"u}r die Variante des Selective Laser Melting (SLM) sind Anwendungen in der Zahntechnik bereits weit verbreitet und der Einsatz in sensitiven Branchen wie der Luftfahrt ist in greifbare N{\"a}he ger{\"u}ckt. Deshalb werden auch vermehrt Anstrengungen unternommen, um bisher nicht verarbeitete Materialien zu qualifizieren. Dies sind vorzugsweise Nicht-Eisen- und Edelmetalle, die sowohl eine sehr hohe Reflektivit{\"a}t als auch eine sehr gute W{\"a}rmeleitf{\"a}higkeit aufweisen - beides Eigenschaften, die die Beherrschung des Laser-Schmelzprozesses erschweren und nur kleine Prozessfenster zulassen. Die Arbeitsgruppe SLM des Lehr- und Forschungsgebietes Hochleistungsverfahren der Fertigungstechnik hat sich unter der Randbedingung einer kleinen und mit geringer Laserleistung ausgestatteten SLM Maschine der Aufgabe gewidmet und am Beispiel von Silber die Parameterfelder f{\"u}r Einzelspuren und wenig komplexe Geometrien systematisch untersucht. Die Arbeiten wurden von FEM Simulationen begleitet und durch metallographische Untersuchungen verifiziert. Die Ergebnisse bilden die Grundlage zur schnellen Parameterfindung bei komplexen Geometrien und bei Ver{\"a}nderungen der Zusammensetzung, wie sie bei zuk{\"u}nftigen Legierungen zu erwarten sind. Die Ergebnisse werden exemplarisch auf unterschiedliche Geometrien angewandt und entsprechende Bauteile gezeigt.},
  language  = {de}
}
@article{Starke1984,
  author    = {Starke, G{\"u}nther},
  title     = {Prozesssteuerung und Automatisierung in der Schweisstechnik},
  pages     = {341 -- 351},
  year      = {1984},
  language  = {de}
}
@article{Frings1990,
  author    = {Frings, Michael},
  title     = {Prozessuale Ber{\"u}cksichtigung der Erkrankung des Beklagten, OLG K{\"o}ln},
  series = {Neue juristische Wochenschrift : NJW / NJW-Rechtsprechungs-Report Zivilrecht : NJW-RR (1990)},
  journal   = {Neue juristische Wochenschrift : NJW / NJW-Rechtsprechungs-Report Zivilrecht : NJW-RR (1990)},
  isbn      = {0179-4043},
  pages     = {1341},
  year      = {1990},
  language  = {de}
}
@article{Frings1997,
  author    = {Frings, Michael},
  title     = {Prozessvergleich mit Verfallklausel (OLG D{\"u}sseldorf, Urteil vom 04.05.1995)},
  series = {Entscheidungen zum Wirtschaftsrecht : EWiR ; Kurzkommentare (1997)},
  journal   = {Entscheidungen zum Wirtschaftsrecht : EWiR ; Kurzkommentare (1997)},
  isbn      = {0177-9303},
  pages     = {931},
  year      = {1997},
  language  = {de}
}
@article{Starke1998,
  author    = {Starke, G{\"u}nther},
  title     = {Prozeßkontrolle und Prozeßsteuerung f{\"u}r die Fertigung in schweißtechnischen Betrieben},
  pages     = {45 -- 52},
  year      = {1998},
  language  = {de}
}
@article{LepersRakePuetter1976,
  author    = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.},
  title     = {Prozeßrechnerautomatisierung von W{\"a}rmeprozessen},
  series = {Elektro-Anzeiger},
  volume    = {29},
  journal   = {Elektro-Anzeiger},
  number    = {5},
  publisher = {Konradin},
  address   = {Leinfelden-Echterdingen},
  issn      = {0013-5518},
  pages     = {98 -- 101},
  year      = {1976},
  language  = {de}
}
@article{LepersRakePuetter1976,
  author    = {Lepers, Heinrich and Rake, H. and P{\"u}tter, L.},
  title     = {Prozeßrechnerautomatisierung von W{\"a}rmeprozessen in der Grundstoffindustrie},
  series = {Industrie-Anzeiger},
  volume    = {98},
  journal   = {Industrie-Anzeiger},
  number    = {17/18},
  publisher = {Konradin},
  address   = {Leinfelden-Echterdingen},
  issn      = {0019-9036},
  pages     = {286 -- 289},
  year      = {1976},
  language  = {de}
}
@article{Polumsky1981,
  author    = {Polumsky, Dieter},
  title     = {Pr{\"a}missen und Methoden bei großr{\"a}umigen Verkehrsprognosen},
  publisher = {Inst.},
  address   = {Aachen},
  pages     = {67 -- 75},
  year      = {1981},
  language  = {de}
}
@article{ButenwegGellertKranzler2008,
  author    = {Butenweg, Christoph and Gellert, Christoph and Kranzler, Thomas},
  title     = {Pseudo-dynamische Versuche an Reihenmittelh{\"a}usern - Vergleich mit aktuellen Berechnungsans{\"a}tzen},
  series = {Mauerwerk : European journal of masonry},
  volume    = {Volume 12},
  journal   = {Mauerwerk : European journal of masonry},
  number    = {Issue 6},
  issn      = {1437-1022 (E-Journal); 1432-3427 (Print)},
  doi       = {10.1002/dama.200800397},
  pages     = {315 -- 326},
  year      = {2008},
  language  = {de}
}
@article{SchmitzHirschBongaertsetal.2002,
  author    = {Schmitz, M. and Hirsch, E. and Bongaerts, Johannes and Takors, Ralf},
  title     = {Pulse experiments as a prerequisite for the quantification of in vivo enzyme kinetics in aromatic amino acid pathway of Eschericia coli},
  series = {Biotechnology progress},
  volume    = {Vol. 18},
  journal   = {Biotechnology progress},
  number    = {Iss. 5},
  issn      = {1520-6033 (E-Journal); 8756-7938 (Print)},
  pages     = {935 -- 941},
  year      = {2002},
  language  = {en}
}
@article{StreunBrandenburgLarueetal.2001,
  author    = {Streun, M. and Brandenburg, G. and Larue, H. and Zimmermann, E. and Ziemons, Karl and Halling, H.},
  title     = {Pulse recording by free-running sampling},
  series = {IEEE Transactions on Nuclear Science},
  volume    = {48},
  journal   = {IEEE Transactions on Nuclear Science},
  number    = {3},
  isbn      = {0018-9499},
  pages     = {524 -- 526},
  year      = {2001},
  abstract  = {Pulses from a position-sensitive photomultiplier (PS-PMT) are recorded by free-running ADCs at a sampling rate of 40 MHz. A four-channel acquisition board has been developed which is equipped with four 12-bit ADCs connected to one field programmable gate array (FPGA). The FPGA manages data acquisition and the transfer to the host computer. It can also work as a digital trigger, so a separate hardware trigger can be omitted. The method of free-running sampling provides a maximum of information, besides the pulse charge and amplitude also pulse shape and starting time are contained in the sampled data. This information is crucial for many tasks such as distinguishing between different scintillator materials, determination of radiation type, pile-up recovery, coincidence detection or time-of-flight applications. The absence of an analog integrator allows very high count rates to be dealt with. Since this method is to be employed in positron emission tomography (PET), the position of an event is also important. The simultaneous readout of four channels allows localization by means of center-of-gravity weighting. First results from a test setup with LSO scintillators coupled to the PS-PMT are presented here},
  language  = {en}
}
@article{StreunBrandenburgLarueetal.2000,
  author    = {Streun, M. and Brandenburg, G. and Larue, H. and Zimmermann, E. and Ziemons, Karl and Halling, H.},
  title     = {Pulse recording by free-running sampling},
  series = {2000 IEEE Nuclear Science Symposium Conference Record, Vol. 2},
  journal   = {2000 IEEE Nuclear Science Symposium Conference Record, Vol. 2},
  issn      = {1082-3654},
  pages     = {9/179 -- 9/181},
  year      = {2000},
  abstract  = {Pulses from a position-sensitive photomultiplier (PS-PMT) are recorded by free running ADCs at a sampling rate of 40 MHz. A four-channel acquisition-board has been developed which is equipped with four 12 bit-ADCs connected to one FPGA (field programmable gate array). The FPGA manages data acquisition and the transfer to the host computer. It can also work as a digital trigger, so a separate hardware-trigger can be omitted. The method of free running sampling provides a maximum of information, besides the pulse charge and amplitude also pulse shape and starting time are contained in the sampled data. These informations are crucial for many tasks such as distinguishing between different scintillator materials, determination of radiation type, pile-up recovery, coincidence detection or time-of-flight applications. The absence of an analog integrator allows coping with very high count rates. Since this method is going to be employed in positron emission tomography (PET), the position of an event is another important information. The simultaneous readout of four channels allows localization by means of center-of-gravity weighting. First results from a test setup with LSO-scintillators coupled to the PS-PMT are presented},
  language  = {en}
}
@article{StreunBrandenburgLarueetal.2003,
  author    = {Streun, M. and Brandenburg, G. and Larue, H. and Saleh, H. and Zimmermann, E. and Ziemons, Karl and Halling, H.},
  title     = {Pulse shape discrimination of LSO and LuYAP scintillators for depth of interaction detection in PET},
  series = {2002 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  journal   = {2002 IEEE Nuclear Science Symposium Conference Record, Vol. 3},
  issn      = {1082-3654},
  pages     = {1636 -- 1639},
  year      = {2003},
  abstract  = {A feasible way to gain the depth of interaction information in a PET scanner is the use of phoswich detectors. In general the layer of interaction is identified front the pulse shape of the corresponding scintillator material. In this work pulses from LSO and LuYAP crystals were investigated in order to find a practical method of distinguishing. It turned out that such a pulse processing could he kept simple due to an additional slow component in the light decay of the LuYAP pulse. At the same time the short decay time guarantees that the major amount of the light output is still collected within a short pulse recording time.},
  language  = {en}
}
@article{StreunBrandenburgLarueetal.2003,
  author    = {Streun, M. and Brandenburg, G. and Larue, H. and Saleh, H. and Zimmermann, E. and Ziemons, Karl and Halling, H.},
  title     = {Pulse shape discrimination of LSO and LuYAP scintillators for depth of interaction detection in PET},
  series = {IEEE Transactions on Nuclear Science},
  volume    = {50},
  journal   = {IEEE Transactions on Nuclear Science},
  number    = {3},
  isbn      = {0018-9499},
  pages     = {344 -- 347},
  year      = {2003},
  abstract  = {A feasible way to gain the depth of interaction information in a positron emission tomography scanner is the use of phoswich detectors. In general, the layer of interaction is identified from the pulse shape of the corresponding scintillator material. In this work, pulses from LSO and LuYAP crystals were investigated in order to find a practical method of distinguishing. It turned out that such a pulse processing could be kept simple because of an additional slow component in the light decay of the LuYAP pulse. At the same time, the short decay time guarantees that the major amount of the light output is still collected within a short pulse recording time.},
  language  = {en}
}
@article{KotliarBaumannVilseretal.2011,
  author    = {Kotliar, Konstantin and Baumann, Marcus and Vilser, Walthard and Lanzl, Ines M.},
  title     = {Pulse wave velocity in retinal arteries of healthy volunteers},
  series = {British Journal of Ophthalmology (eBJO)},
  volume    = {95},
  journal   = {British Journal of Ophthalmology (eBJO)},
  number    = {11},
  publisher = {BMJ Publ. Group},
  address   = {London},
  isbn      = {1468-2079},
  pages     = {675 -- 679},
  year      = {2011},
  language  = {en}
}
@article{SchoeningSchubertZanderetal.1999,
  author    = {Sch{\"o}ning, Michael Josef and Schubert, J{\"u}rgen and Zander, Willy and M{\"u}ller-Veggian, Mattea},
  title     = {Pulsed laser deposition as a novel preparation technique for chemical microsensors},
  series = {Proceedings of SPIE 3857, Chemical Microsenors and Applications II, 124 (November 18, 1999). 3857 (1999)},
  journal   = {Proceedings of SPIE 3857, Chemical Microsenors and Applications II, 124 (November 18, 1999). 3857 (1999)},
  pages     = {124 -- 134},
  year      = {1999},
  language  = {en}
}
@article{SchoeningSchaubZundeletal.1995,
  author    = {Sch{\"o}ning, Michael Josef and Schaub, A. and Zundel, A. and Beckers, L. and Schubert, J. and Zander, W. and Kordos, P. and L{\"u}th, H.},
  title     = {Pulsed laser deposition as a novel thin film preparation method for silicon-based field effect sensors},
  series = {Proceedings of the 25th European Solid State Device Research Conference : the Netherlands Congress Centre, The Hague, the Netherlands, 25th - 27th September 1995 / ESSDERC '95. Ed. by H. C. de Graaff},
  journal   = {Proceedings of the 25th European Solid State Device Research Conference : the Netherlands Congress Centre, The Hague, the Netherlands, 25th - 27th September 1995 / ESSDERC '95. Ed. by H. C. de Graaff},
  publisher = {Ed. Fronti{\`e}res},
  address   = {Gif-sur-Yvette},
  isbn      = {2-86332-182-X},
  pages     = {601 -- 604},
  year      = {1995},
  language  = {en}
}
@article{SchoeningMourzinaSchubertetal.2001,
  author    = {Sch{\"o}ning, Michael Josef and Mourzina, Yu.G. and Schubert, J. and Zander, W. and Legin, A. and Vlasov, Y. G. and L{\"u}th, H.},
  title     = {Pulsed laser deposition - an innovative technique for preparing inorganic thin films},
  series = {Electroanalysis. 13 (2001), H. 8-9},
  journal   = {Electroanalysis. 13 (2001), H. 8-9},
  isbn      = {1040-0397},
  pages     = {727 -- 732},
  year      = {2001},
  language  = {en}
}
@article{KloockMourzinaSchubertetal.2004,
  author    = {Kloock, Joachim P. and Mourzina, Y. and Schubert, J. and Ermelenko, Y. and Sch{\"o}ning, Michael Josef},
  title     = {Pulsed laser deposition: A tool for fabricating thin-film microsensors},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {1032 -- 1033},
  year      = {2004},
  language  = {en}
}
@article{BiselliThoemmesBornetal.1995,
  author    = {Biselli, Manfred and Th{\"o}mmes, J. and Born, C. and Wandrey, C.},
  title     = {Purification of monoclonal antibodies by fluidized bed adsorption / Th{\"o}mmes, J. ; Born, C. Biselli, M. ; Wandrey, C. ; Kula, M.-R.},
  series = {Animal cell technology : developments towards the 21st century / edited by E. C. Beuvery},
  journal   = {Animal cell technology : developments towards the 21st century / edited by E. C. Beuvery},
  publisher = {Kluwer Acad. Press},
  address   = {Dordrecht},
  isbn      = {0-7923-3736-0},
  pages     = {515 -- 519},
  year      = {1995},
  language  = {en}
}
@article{TippkoetterRoth2020,
  author    = {Tippk{\"o}tter, Nils and Roth, Jasmine},
  title     = {Purified Butanol from Lignocellulose - Solvent-Impregnated Resins for an Integrated Selective Removal},
  series = {Chemie Ingenieur Technik},
  volume    = {92},
  journal   = {Chemie Ingenieur Technik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.202000200},
  pages     = {1741 -- 1751},
  year      = {2020},
  abstract  = {In traditional microbial biobutanol production, the solvent must be recovered during fermentation process for a sufficient space-time yield. Thermal separation is not feasible due to the boiling point of n-butanol. As an integrated and selective solid-liquid separation alternative, solvent impregnated resins (SIRs) were applied. Two polymeric resins were evaluated and an extractant screening was conducted. Vacuum application with vapor collection in fixed-bed column as bioreactor bypass was successfully implemented as butanol desorption step. In course of further increasing process economics, fermentation with renewable lignocellulosic substrates was conducted using Clostridium acetobutylicum. Utilization of SIR was shown to be a potential strategy for solvent removal from fermentation broth, while application of a bypass column allows for product removal and recovery at once.},
  language  = {en}
}
@article{PietschHerzwurm2003,
  author    = {Pietsch, Wolfram and Herzwurm, G.},
  title     = {QFD for Customer-Focused Requirements Engineering / Herzwurm, G., Pietsch, W.},
  series = {Proceedings : 8 - 12 September 2003, Monterey Bay, California, USA / sponsored by IEEE Computer Society Technical Council on Software Engineering (TCSE) ... In cooperation with ACM SigSOFT},
  journal   = {Proceedings : 8 - 12 September 2003, Monterey Bay, California, USA / sponsored by IEEE Computer Society Technical Council on Software Engineering (TCSE) ... In cooperation with ACM SigSOFT},
  publisher = {IEEE Computer Society},
  address   = {Los Alamitos, Calif. [u.a.]},
  isbn      = {0769519806},
  pages     = {330 -- 338},
  year      = {2003},
  language  = {en}
}
@article{Hoettges2017,
  author    = {H{\"o}ttges, J{\"o}rg},
  title     = {QKan - Management of drainage system data with QGIS},
  series = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  volume    = {17},
  journal   = {Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings},
  number    = {Article 13},
  pages     = {95 -- 100},
  year      = {2017},
  language  = {en}
}
@article{SparlaWueller1985,
  author    = {Sparla, Peter and W{\"u}ller, Herbert},
  title     = {QL 300 D, ein Nivelliersystem mit Halbleiterlaserdiode},
  series = {Der Vermessungsingenieur. 36 (1985), H. 1},
  journal   = {Der Vermessungsingenieur. 36 (1985), H. 1},
  isbn      = {0042-4099},
  pages     = {2 -- 4},
  year      = {1985},
  language  = {de}
}
@article{SchubaSchneiderHaverkort1998,
  author    = {Schuba, Marko and Schneider, Gaby and Haverkort, Boudewijn R.},
  title     = {QNA-MC: A Performance Evaluation Tool for Communication Networks with Multicast Data Streams / Schneider, G. ; Schuba, M. ; Haverkort, B. R.},
  series = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  journal   = {Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-64949-2},
  pages     = {105 -- 116},
  year      = {1998},
  language  = {en}
}
@article{RaffeisAdjeiKyeremehVroomenetal.2020,
  author    = {Raffeis, Iris and Adjei-Kyeremeh, Frank and Vroomen, Uwe and Westhoff, Elmar and Bremen, Sebastian and Hohoi, Alexandru and B{\"u}hrig-Polaczek, Andreas},
  title     = {Qualification of a Ni-Cu alloy for the laser powder bed fusion process (LPBF): Its microstructure and mechanical properties},
  series = {Applied Sciences},
  volume    = {10},
  journal   = {Applied Sciences},
  number    = {Art. 3401},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app10103401},
  pages     = {1 -- 15},
  year      = {2020},
  abstract  = {As researchers continue to seek the expansion of the material base for additive manufacturing, there is a need to focus attention on the Ni-Cu group of alloys which conventionally has wide industrial applications. In this work, the G-NiCu30Nb casting alloy, a variant of the Monel family of alloys with Nb and high Si content is, for the first time, processed via the laser powder bed fusion process (LPBF). Being novel to the LPBF processes, optimum LPBF parameters were determined, and hardness and tensile tests were performed in as-built conditions and after heat treatment at 1000 °C. Microstructures of the as-cast and the as-built condition were compared. Highly dense samples (99.8\% density) were achieved after varying hatch distance (80 µm and 140 µm) with scanning speed (550 mm/s-1500 mm/s). There was no significant difference in microhardness between varied hatch distance print sets. Microhardness of the as-built condition (247 HV0.2) exceeded the as-cast microhardness (179 HV0.2.). Tensile specimens built in vertical (V) and horizontal (H) orientations revealed degrees of anisotropy and were superior to conventionally reported figures. Post heat treatment increased ductility from 20\% to 31\% (V), as well as from 16\% to 25\% (H), while ultimate tensile strength (UTS) and yield strength (YS) were considerably reduced.},
  language  = {en}
}
@article{StarkeDrews1983,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Qualitaetssicherung in der automatisierten schweisstechnischen Fertigung durch Einsatz von Sensoren},
  series = {Technisches Messen tm. 50 (1983), H. 12},
  journal   = {Technisches Messen tm. 50 (1983), H. 12},
  isbn      = {0171-8096},
  pages     = {467 -- 473},
  year      = {1983},
  language  = {de}
}
@article{StarkeDrews1983,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Qualitaetssicherung in der automatisierten schweisstechnischen Fertigung durch Einsatz von Sensoren},
  series = {Sensor. 6 (1983)},
  journal   = {Sensor. 6 (1983)},
  pages     = {29 -- 45},
  year      = {1983},
  language  = {de}
}
@article{WolfSimonSchlick1998,
  author    = {Wolf, Martin R. and Simon, S. and Schlick, Christopher},
  title     = {Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.},
  series = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  journal   = {Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unit{\´e} de recherche ... F. Darses ..., eds},
  publisher = {-},
  address   = {Cannes},
  pages     = {1 -- 5},
  year      = {1998},
  language  = {en}
}
@article{FerreinSchifferLakemeyer2006,
  author    = {Ferrein, Alexander and Schiffer, Stefan and Lakemeyer, Gerhard},
  title     = {Qualitative World Models for Soccer Robots / Schiffer, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)},
  journal   = {Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan W{\"o}lfl ... (eds.)},
  publisher = {Univ.},
  address   = {Bremen},
  isbn      = {3-88722-666-6},
  pages     = {3 -- 14},
  year      = {2006},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2019,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbulani and Kallweit, Stephan},
  title     = {Quality assurance in metal powder bed fusion via deep-learning-based image classification},
  series = {Rapid Prototyping Journal},
  volume    = {26},
  journal   = {Rapid Prototyping Journal},
  number    = {2},
  issn      = {1355-2546},
  doi       = {10.1108/RPJ-03-2019-0066},
  pages     = {259 -- 266},
  year      = {2019},
  language  = {en}
}
@article{BienerSasse1993,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Quality improvements in the construction of multilayer covers},
  series = {G{\´e}ologie et confinement des d{\´e}chets toxiques : actes du symposium international, 8 - 11 juin 1993 / GEOCONFINE 93, Montpellier, France. R{\´e}d. Marcel Arnould},
  journal   = {G{\´e}ologie et confinement des d{\´e}chets toxiques : actes du symposium international, 8 - 11 juin 1993 / GEOCONFINE 93, Montpellier, France. R{\´e}d. Marcel Arnould},
  publisher = {Balkema},
  address   = {Rotterdam [u.a.]},
  isbn      = {90-5410-330-2},
  pages     = {309 -- 312},
  year      = {1993},
  language  = {en}
}
@article{Heger1996,
  author    = {Heger, Michael},
  title     = {Qualit{\"a}t der Lehre: Fortbildung der Fortbilder - Tagungsreihe der AHD},
  series = {Das Hochschulwesen. 44 (1996), H. 2},
  journal   = {Das Hochschulwesen. 44 (1996), H. 2},
  isbn      = {0018-2974},
  pages     = {133},
  year      = {1996},
  language  = {de}
}
@article{Pietsch1987,
  author    = {Pietsch, Wolfram},
  title     = {Qualit{\"a}t in die Wiege gelegt},
  series = {Markt \& Technik : die unabh{\"a}ngige Wochenzeitung f{\"u}r Elektronik},
  journal   = {Markt \& Technik : die unabh{\"a}ngige Wochenzeitung f{\"u}r Elektronik},
  number    = {H. 10},
  issn      = {0344-8843},
  pages     = {58 -- 63},
  year      = {1987},
  language  = {de}
}
@article{JacobsPohlJarke1992,
  author    = {Jacobs, Stephan and Pohl, Klaus and Jarke, Matthias},
  title     = {Qualit{\"a}t von Informationssystemen / Klaus Pohl, Stephan Jacobs, Matthias Jarke},
  series = {Information als Produktionsfaktor : Karlsruhe, 28. September bis 2. Oktober 1992 / Winfried G{\"o}rke ... (Hrsg.)},
  journal   = {Information als Produktionsfaktor : Karlsruhe, 28. September bis 2. Oktober 1992 / Winfried G{\"o}rke ... (Hrsg.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-55960-4},
  pages     = {XV, 729 S. : Ill., graph. Darst.},
  year      = {1992},
  language  = {de}
}
@article{Heger2006,
  author    = {Heger, Michael},
  title     = {Qualit{\"a}tsentwicklung des wissenschaftlichen Service. Ansatz und Erfahrungen der Hochschuldidaktik und Studienberatung - Fachhochschule Aachen 2006},
  series = {Qualit{\"a}tsentwicklung an Hochschulen : Erfahrungen und Lehren aus 10 Jahren Evaluation ; Dokumentation zur gleichnamigen Veranstaltung des Projekts Qualit{\"a}tssicherung der HRK am 3. und 4. November 2005 im Bonner Wissenschaftszentrum / [HRK, Hochschulrektorenkonferenz. Herbsttagung "Qualit{\"a}tsentwicklung an Hochschulen, Erfahrungen und Lehren aus 10 Jahren Evaluation. Red.: J{\"o}rn Alphei ...]},
  journal   = {Qualit{\"a}tsentwicklung an Hochschulen : Erfahrungen und Lehren aus 10 Jahren Evaluation ; Dokumentation zur gleichnamigen Veranstaltung des Projekts Qualit{\"a}tssicherung der HRK am 3. und 4. November 2005 im Bonner Wissenschaftszentrum / [HRK, Hochschulrektorenkonferenz. Herbsttagung "Qualit{\"a}tsentwicklung an Hochschulen, Erfahrungen und Lehren aus 10 Jahren Evaluation. Red.: J{\"o}rn Alphei ...]},
  publisher = {HRK, Hochschulrektorenkonferenz},
  address   = {Bonn},
  pages     = {92 -- 97},
  year      = {2006},
  language  = {de}
}
@article{SiepmannSchuhWebersberger1997,
  author    = {Siepmann, Thomas and Schuh, G. and Webersberger, P.},
  title     = {Qualit{\"a}tshandbuch und Prozesspl{\"a}ne im INTRANET / Schuh, G.; Webersberger, P.; Siepmann, Th.},
  series = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)},
  journal   = {Industrie-Management : Zeitschrift f{\"u}r industrielle Gesch{\"a}ftsprozesse (1997)},
  year      = {1997},
  language  = {de}
}
@article{SchaeferGerschuetzScholletal.1995,
  author    = {Sch{\"a}fer, Horst and Gersch{\"u}tz, J. and Scholl, S. and Fischer, A. (u.a.)},
  title     = {Quanten-Hall-Effekt in CdTe/Cd1-X MgX Te Heterostrukturen},
  year      = {1995},
  language  = {en}
}
@article{SchollPalmLehmannetal.1997,
  author    = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas Martin and Spitzer, Klaus},
  title     = {Quantitative Analyse der Stimmlippen},
  series = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]},
  journal   = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]},
  publisher = {Zentralstelle f{\"u}r Forschungsf{\"o}rderung und Technologietransfer},
  address   = {Freiburg},
  isbn      = {3-9805054-2-1},
  pages     = {81 -- 86},
  year      = {1997},
  language  = {de}
}
@article{DantismRoehlenSelmeretal.2019,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Selmer, Thorsten and Wagner, Torsten and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Quantitative differential monitoring of the metabolic activity of Corynebacterium glutamicum cultures utilizing a light-addressable potentiometric sensor system},
  series = {Biosensors and Bioelectronics},
  volume    = {139},
  journal   = {Biosensors and Bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.bios.2019.111332},
  pages     = {Artikel 111332},
  year      = {2019},
  language  = {en}
}