@inproceedings{RitzTerhaarWallenborn2012, author = {Ritz, Thomas and Terhaar, Kristin and Wallenborn, Ramona}, title = {HMI f{\"u}r eCarSharing : ein Baustein f{\"u}r nachhaltige Mobilit{\"a}t}, series = {Mensch \& Computer 2012 - Workshopband : 12. Fach{\"u}bergreifende Konferenz f{\"u}r interaktive und kooperative Medien ; interaktiv informiert - allgegenw{\"a}rtig und allumfassend!?}, booktitle = {Mensch \& Computer 2012 - Workshopband : 12. Fach{\"u}bergreifende Konferenz f{\"u}r interaktive und kooperative Medien ; interaktiv informiert - allgegenw{\"a}rtig und allumfassend!?}, editor = {Reiterer, Harald}, publisher = {Oldenbourg}, address = {M{\"u}nchen}, isbn = {978-3-486-71990-1 (Print)}, doi = {10.1524/9783486719918.341}, pages = {381 -- 388}, year = {2012}, language = {de} } @inproceedings{RitzWallenborn2013, author = {Ritz, Thomas and Wallenborn, Ramona}, title = {HMI mobiler Apps zur Organisation multimodaler Mobilit{\"a}t}, series = {Mensch \& Computer 2013 - Workshopband : 13. fach{\"u}bergreifende Konferenz f{\"u}r interaktive und kooperative Medien}, booktitle = {Mensch \& Computer 2013 - Workshopband : 13. fach{\"u}bergreifende Konferenz f{\"u}r interaktive und kooperative Medien}, editor = {Boll-Westermann, Susanne}, publisher = {Oldenbourg}, address = {M{\"u}nchen}, isbn = {978-3-486-77855-7 (Print)}, doi = {10.1524/9783486781236}, pages = {103 -- 109}, year = {2013}, language = {de} } @inproceedings{BarnatBillerbeck2016, author = {Barnat, Miriam and Billerbeck, Katrin}, title = {Hochschuldidaktisches Qualit{\"a}tsmanagement - Ideen f{\"u}r die Erm{\"o}glichung guter Lehre}, series = {Professionalisierung der Hochschuldidaktik: [42. Jahrestagung der Gesellschaft f{\"u}r Hochschuldidaktik im M{\"a}rz 2013 an der Hochschule Magdeburg-Stendal]}, booktitle = {Professionalisierung der Hochschuldidaktik: [42. Jahrestagung der Gesellschaft f{\"u}r Hochschuldidaktik im M{\"a}rz 2013 an der Hochschule Magdeburg-Stendal]}, publisher = {Bertelsmann}, address = {Bielefeld}, isbn = {978-3-7639-5533-6}, pages = {261 -- 269}, year = {2016}, language = {de} } @inproceedings{Hecker2007, author = {Hecker, Dirk}, title = {Hochwasservorsorge f{\"u}r Abwasseranlagen (DWA-M103) und {\"o}ffentliche Einrichtungen}, year = {2007}, abstract = {Dipl.-Ing. Dirk Hecker von der Ingenieurgesellschaft Tuttahs \& Meyer in Aachen. Vortrag gehalten beim 1. Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen> 27 S. (S. 28-54) Zusammenfassung [des Autors]: Nach den spektakul{\"a}ren Hochwasserereignissen an Rhein, Elbe und Donau hat die Deutsche Vereinigung f{\"u}r Wasserwirtschaft, Abwasser und Abfall e. V. (DWA) einen Fachausschuss zur Erstellung eines Merkblattes M 103 „Hochwasserschutz f{\"u}r Abwasseranlagen" berufen. Das Merkblatt zeigt in den Kapiteln Konzeption, Planungsgrunds{\"a}tze und Hochwassermanagement eine strukturierte Vorgehensweise zur bestm{\"o}glichen Vorsorge zum Schutz der Abwasseranlagen im Hochwasserfall. Entsprechend den Forderungen des im Jahr 2005 verabschiedeten Gesetzes zur Verbesserung des vorbeugenden Hochwasserschutzes, floss in das Wasserhaushaltsgesetz unter anderem die allgemeine Verpflichtung jedes potentiell vom Hochwasser Betroffenen ein, geeignete Schutzmaßnahmen zur Schadensminimierung zu treffen. Hierbei werden speziell die Wasserversorgung und die Abwasserbeseitigung erw{\"a}hnt. Im DWA-M 103 wir detailliert dargestellt wie und mit welchem Aufwand die Abwasseranlagen zu {\"u}berpr{\"u}fen sind und wie hierzu ein Hochwasserschutzkonzept erstellt werden kann. Zus{\"a}tzlich werden Hinweise f{\"u}r die Planung von Abwasseranlagen in hochwassergef{\"a}hrdeten Bereichen gegeben, die den st{\"o}rungsfreien Betrieb im Hochwasserfall gew{\"a}hrleisten sollen. Schlussendlich werden das Hochwassermanagement und der Betrieb dargestellt und hier wichtige Anregungen gegeben im Ernstfall ausreichend vorbereitet zu sein. Das DWA-M 103 richtet sich in erster Linie an die Betreiber und Planer von Abwasseranlagen. Jedoch werden hier auch, gerade durch die Vielzahl von Checklisten, Kommunen Denkanst{\"o}ße und Anregungen f{\"u}r die Hochwasservorsorge/-schutz von {\"o}ffentlichen Geb{\"a}uden und Einrichtungen gegeben.}, subject = {Hochwasserschutz}, language = {de} } @inproceedings{PrickingGebsFleischhakeretal.2015, author = {Pricking, Sebastian and Gebs, Raphael and Fleischhaker, Robert and Kleinbauer, Jochen and Budnicki, Aleksander and Sutter, Dirk and Killi, Alexander and Weiler, Sascha and Mielke, M. and Beaudou, B. and Debord, B. and Gerome, F. and Benabid, F.}, title = {Hollow core fiber delivery of sub-ps pulses from a TruMicro 5000 Femto edition thin disk amplifier}, series = {High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)}, booktitle = {High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)}, editor = {Dorsch, Friedhelm}, publisher = {SPIE, International Society for Optical Engineering}, organization = {The international society for optical engineering, SPIE <2, 2015, San Francisco, CA>}, isbn = {978-162841446-2}, issn = {0277-786X}, doi = {10.1117/12.2079289}, pages = {935602}, year = {2015}, language = {en} } @inproceedings{BedburMoorkampPetersonetal.2020, author = {Bedbur, Christian and Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas}, title = {Holzbr{\"u}cken mit Natursteinbel{\"a}gen - Untersuchungen zur Aktivierung der Verbundwirkung}, series = {Doktorandenkolloquium Holzbau Forschung + Praxis : Stuttgart, 05. + 06. M{\"a}rz 2020}, booktitle = {Doktorandenkolloquium Holzbau Forschung + Praxis : Stuttgart, 05. + 06. M{\"a}rz 2020}, editor = {Kuhlmann, Ulrike}, publisher = {Universit{\"a}t Stuttgart, Institut f{\"u}r Konstruktion und Entwurf}, address = {Stuttgart}, pages = {53 -- 60}, year = {2020}, language = {de} } @inproceedings{PetersonRoethUibel2017, author = {Peterson, Leif Arne and R{\"o}th, Thilo and Uibel, Thomas}, title = {Holzwerkstoffe in Karosseriestrukturen}, series = {Tagungsband Aachener Holzbautagung 2017}, booktitle = {Tagungsband Aachener Holzbautagung 2017}, editor = {Uibel, Thormas and Peterson, Leif Arne and Baumann, Marcus}, issn = {2197-4489}, pages = {34 -- 45}, year = {2017}, language = {de} } @inproceedings{FrotscherStaat2015, author = {Frotscher, Ralf and Staat, Manfred}, title = {Homogenization of a cardiac tissue construct}, series = {CMBE15 : 4th International Conference on Computational \& Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; {\´E}cole Normale Sup{\´e}rieure de Cachan ; Cachan (Paris), France}, booktitle = {CMBE15 : 4th International Conference on Computational \& Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; {\´E}cole Normale Sup{\´e}rieure de Cachan ; Cachan (Paris), France}, editor = {Nithiarasu, Perumal}, publisher = {CMBE}, address = {[s.l.]}, issn = {2227-9385}, pages = {645 -- 648}, year = {2015}, language = {en} } @inproceedings{CzarneckiHeuserSpiliopoulou2009, author = {Czarnecki, Christian and Heuser, Marcus and Spiliopoulou, Myra}, title = {How does the implementation of a next generation network influence a telecommunication company?}, series = {European and Mediterranean Conference on Information Systems}, booktitle = {European and Mediterranean Conference on Information Systems}, editor = {Irani, Zahir}, publisher = {Brunel University}, address = {London}, isbn = {9781902316697}, pages = {1 -- 11}, year = {2009}, abstract = {As the potential of a Next Generation Network (NGN) is recognized, telecommunication companies consider switching to it. Although the implementation of an NGN seems to be merely a modification of the network infrastructure, it may trigger or require changes in the whole company and even influence the company strategy. To capture the effects of NGN we propose a framework based on concepts of business engineering and technical recommendations for the introduction of NGN technology. The specific design of solutions for the layers "Strategy", "Processes" and "Information Systems" as well as their interdependencies are an essential characteristic of the developed framework. We have per-formed a case study on NGN implementation and observed that all layers captured by our framework are influenced by the introduction of an NGN.}, language = {en} } @inproceedings{RousseauKern2014, author = {Rousseau, Alain and Kern, Alexander}, title = {How to deal with environmental risk in IEC 62305-2}, series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China}, booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China}, organization = {International Conference on Lightning Protection <2014, Shanghai>}, pages = {521 -- 527}, year = {2014}, abstract = {The 2nd edition of the lightning risk management standard (IEC 62305-2) considers structures, which may endanger environment. In these cases, the loss is not limited to the structure itself, which is valid for usual structures. In the past (Edition 1) this danger was simply taken into account by a special hazard factor, multiplying the existing risk for the structure with a number. Now, in the edition 2, we add to the risk for the structure itself a "second risk" due to the losses outside the structure. The losses outside can be treated independently from what occurs inside. This is a major advantage to analyze the risk for sensitive structures, like chemical plants, nuclear plants, or structures containing explosives, etc. In this paper, the existing procedure given by the European version EN 62305-2 Ed.2 is further developed and applied to a few structures.}, language = {en} } @inproceedings{BeckerEggertSchwittay2012, author = {Becker, J{\"o}rg and Eggert, Mathias and Schwittay, Sebastian}, title = {How to Evaluate the Practical Relevance of Business Process Compliance Checking Approaches?}, series = {Multikonferenz Wirtschaftsinformatik 2012 - Tagungsband der MKWI 2012}, booktitle = {Multikonferenz Wirtschaftsinformatik 2012 - Tagungsband der MKWI 2012}, editor = {Mattfeld, Dirk Christian}, publisher = {Institut f{\"u}r Wirtschaftsinformatik}, address = {Braunschweig}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:084-13011115376}, pages = {849 -- 862}, year = {2012}, language = {en} } @inproceedings{BeckerEggertFleischeretal.2013, author = {Becker, J{\"o}rg and Eggert, Mathias and Fleischer, Stefan and Knackstedt, Ralf}, title = {How to Teach Regulatory Compliant Data Warehouse Engineering?}, series = {Proceedings of the Nineteenth Americas Conference on Information Systems, Chicago, Illinois, August 15-17, 2013.}, booktitle = {Proceedings of the Nineteenth Americas Conference on Information Systems, Chicago, Illinois, August 15-17, 2013.}, pages = {10 S.}, year = {2013}, language = {en} } @inproceedings{MertensPuetzBrauneretal.2021, author = {Mertens, Alexander and P{\"u}tz, Sebastian and Brauner, Philipp and Brillowski, Florian Sascha and Buczak, Nadine and Dammers, Hannah and van Dyck, Marc and Kong, Iris and K{\"o}nigs, Peter and Kortomeikel, Frauke Carole and Rodemann, Niklas and Schaar, Anne Kathrin and Steuer-Dankert, Linda and Wlecke, Shari and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank Thomas and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena}, title = {Human digital shadow: Data-based modeling of users and usage in the internet of production}, series = {14th International Conference on Human System Interaction : 8-10 July 2021. Gdańsk, Poland}, booktitle = {14th International Conference on Human System Interaction : 8-10 July 2021. Gdańsk, Poland}, publisher = {IEEE}, doi = {10.1109/HSI52170.2021.9538729}, pages = {1 -- 8}, year = {2021}, abstract = {Digital Shadows as the aggregation, linkage and abstraction of data relating to physical objects are a central vision for the future of production. However, the majority of current research takes a technocentric approach, in which the human actors in production play a minor role. Here, the authors present an alternative anthropocentric perspective that highlights the potential and main challenges of extending the concept of Digital Shadows to humans. Following future research methodology, three prospections that illustrate use cases for Human Digital Shadows across organizational and hierarchical levels are developed: human-robot collaboration for manual work, decision support and work organization, as well as human resource management. Potentials and challenges are identified using separate SWOT analyses for the three prospections and common themes are emphasized in a concluding discussion.}, language = {en} } @inproceedings{KazukiKobayashiHirabayashietal.2019, author = {Kazuki, Yasuhiro and Kobayashi, Kaoru and Hirabayashi, Masumi and Abe, Satoshi and Kajitani, Naoyo and Kazuki, Kanoko and Takehara, Shoko and Takiguchi, Masato and Satoh, Daisuke and Kuze, Jiro and Sakuma, Tetsushi and Kaneko, Takehito and Mashimo, Tomoji and Osamura, Minori and Hashimoto, Mari and Wakatsuki, Riko and Hirashima, Rika and Fujiwara, Ryoichi and Deguchi, Tsuneo and Kurihara, Atsushi and Tsukazaki, Yasuko and Senda, Naoto and Yamamoto, Takashi and Scheer, Nico and Oshimura, Mitsuo}, title = {Humanized UGT2 and CYP3A transchromosomic rats for improved prediction of human drug metabolism}, series = {PNAS Proceedings of the National Academy of Sciences of the United States of America}, volume = {116}, booktitle = {PNAS Proceedings of the National Academy of Sciences of the United States of America}, number = {8}, issn = {1091-6490}, doi = {10.1073/pnas.1808255116}, pages = {3072 -- 3081}, year = {2019}, language = {en} } @inproceedings{ValeroBung2015, author = {Valero, Daniel and Bung, Daniel B.}, title = {Hybrid investigation of air transport processes in moderately sloped stepped spillway flows}, series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands}, booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands}, organization = {IAHR World Congress <36, 2015, Den Haag>}, pages = {1 -- 10}, year = {2015}, language = {en} } @inproceedings{BungValeroHermens2018, author = {Bung, Daniel B. and Valero, Daniel and Hermens, G.}, title = {Hybrid investigation on the hydraulic performance of a new trapezoidal fishway}, series = {7th IAHR International Symposium on Hydraulic Structures, ISHS 2018}, booktitle = {7th IAHR International Symposium on Hydraulic Structures, ISHS 2018}, isbn = {978-069213277-7}, doi = {10.15142/T3S06R}, pages = {184 -- 193}, year = {2018}, language = {de} } @inproceedings{PakPiegelerFeldmannetal.2006, author = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich}, title = {Hybrid joints of textile reinforced concrete parts - designed for assembly}, series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, editor = {Hegger, Josef}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>}, isbn = {2-912143-97-7}, pages = {181 -- 190}, year = {2006}, language = {en} } @inproceedings{Wollert1994, author = {Wollert, J{\"o}rg}, title = {Hybride arbeitspunktabh{\"a}ngige Beobachter zur intelligenten Modellierung und Regelung nichtlinearer Strecken}, series = {Fuzzy control : GMA-Aussprachetag ; Tagung Langen, 22. und 23. M{\"a}rz 1994. (VDI-Berichte ; 1113)}, booktitle = {Fuzzy control : GMA-Aussprachetag ; Tagung Langen, 22. und 23. M{\"a}rz 1994. (VDI-Berichte ; 1113)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik}, isbn = {3-18-091113-1}, pages = {497 -- 506}, year = {1994}, language = {de} } @inproceedings{PlessmannWollert1993, author = {Pleßmann, K. W. and Wollert, J{\"o}rg}, title = {Hybride Beobachter zur Regelung arbeitspunktabh{\"a}ngiger Regelstrecken}, series = {Berichtsband / 3. Workshop "Fuzzy Control" des GMA-UA 1.4.2 am 11./12.11.1993 in Dortmund. (Forschungsberichte / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 2/93)}, booktitle = {Berichtsband / 3. Workshop "Fuzzy Control" des GMA-UA 1.4.2 am 11./12.11.1993 in Dortmund. (Forschungsberichte / Universit{\"a}t Dortmund, Fakult{\"a}t f{\"u}r Elektrotechnik ; 2/93)}, publisher = {Univ., Fak. Elektrotechnik}, address = {Dortmund}, pages = {122 -- 126}, year = {1993}, language = {de} } @inproceedings{BuehrigPolaczekRoethBaumeisteretal.2006, author = {B{\"u}hrig-Polaczek, Andreas and R{\"o}th, Thilo and Baumeister, E. and Nowack, N. and S{\"u}ßmann, Torsten}, title = {Hybride Leichtbaustrukturen in Stahlblech-Leichtmetall Verbundguss}, year = {2006}, abstract = {Stahl-Leichtmetall-Hybride mit hohen Leistungspotentialen k{\"o}nnen heute wirtschaftlich abgebildet werden und eignen sich m{\"o}glicherweise auch zum Einsatz in Fahrzeugkarosserien}, subject = {Karosseriebau}, language = {de} } @inproceedings{BungTullis2018, author = {Bung, Daniel B. and Tullis, Blake}, title = {Hydraulic Structures - ISHS2018 in Perspective}, series = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May}, booktitle = {7th IAHR International Symposium on Hydraulic Structures, Aachen, Germany, 15-18 May}, isbn = {978-0-692-13277-7}, doi = {10.15142/T3WH2B}, pages = {9 seiten}, year = {2018}, language = {en} } @inproceedings{Bornebusch2006, author = {Bornebusch, Michael}, title = {Hydraulische und hydrologische Modellsimulation als Planungswerkzeug f{\"u}r Hochwasser-Schutz-Massnahmen}, year = {2006}, abstract = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 25-27. Zusammenfassung des Vortrags.}, subject = {Hochwasserschutz}, language = {de} } @inproceedings{AhmedSchlenkhoffBung2011, author = {Ahmed, H. and Schlenkhoff, A. and Bung, Daniel B.}, title = {Hydrodynamic characteristics of vertical slotted wall breakwaters}, series = {Balance and uncertainty - water in a changing world : proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia}, booktitle = {Balance and uncertainty - water in a changing world : proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia}, organization = {International Association for Hydraulic Engineering and Research}, isbn = {978-0-85825-868-6}, pages = {1179 -- 1186}, year = {2011}, language = {en} } @inproceedings{FunkeBeckmannStefanetal.2023, author = {Funke, Harald and Beckmann, Nils and Stefan, Lukas and Keinz, Jan}, title = {Hydrogen combustor integration study for a medium range aircraft engine using the dry-low NOx "Micromix" combustion principle}, series = {Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. Volume 1: Aircraft Engine. Boston, Massachusetts, USA. June 26-30, 2023}, booktitle = {Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. Volume 1: Aircraft Engine. Boston, Massachusetts, USA. June 26-30, 2023}, publisher = {ASME}, address = {New York}, isbn = {978-0-7918-8693-9}, doi = {10.1115/GT2023-102370}, pages = {12 Seiten}, year = {2023}, abstract = {The feasibility study presents results of a hydrogen combustor integration for a Medium-Range aircraft engine using the Dry-Low-NOₓ Micromix combustion principle. Based on a simplified Airbus A320-type flight mission, a thermodynamic performance model of a kerosene and a hydrogen-powered V2530-A5 engine is used to derive the thermodynamic combustor boundary conditions. A new combustor design using the Dry-Low NOx Micromix principle is investigated by slice model CFD simulations of a single Micromix injector for design and off-design operation of the engine. Combustion characteristics show typical Micromix flame shapes and good combustion efficiencies for all flight mission operating points. Nitric oxide emissions are significant below ICAO CAEP/8 limits. For comparison of the Emission Index (EI) for NOₓ emissions between kerosene and hydrogen operation, an energy (kerosene) equivalent Emission Index is used. A full 15° sector model CFD simulation of the combustion chamber with multiple Micromix injectors including inflow homogenization and dilution and cooling air flows investigates the combustor integration effects, resulting NOₓ emission and radial temperature distributions at the combustor outlet. The results show that the integration of a Micromix hydrogen combustor in actual aircraft engines is feasible and offers, besides CO₂ free combustion, a significant reduction of NOₓ emissions compared to kerosene operation.}, language = {en} } @inproceedings{ThenentDahmann2011, author = {Thenent, N. E. and Dahmann, Peter}, title = {Hydrostatic propeller drive}, series = {Proceedings of the conference : 18 - 20 May, 2011 Tampere, Finland / the Twelth Scandinavian International Conference on Fluid Power, SICFP'11. Ed.: Harri Sairiala ... Vol. 1}, booktitle = {Proceedings of the conference : 18 - 20 May, 2011 Tampere, Finland / the Twelth Scandinavian International Conference on Fluid Power, SICFP'11. Ed.: Harri Sairiala ... Vol. 1}, address = {Tampere}, isbn = {978-952-15-2517-9}, pages = {217 -- 227}, year = {2011}, language = {en} } @inproceedings{DachwaldMikuckiTulaczyketal.2012, author = {Dachwald, Bernd and Mikucki, Jill A. and Tulaczyk, Slawek and Digel, Ilya and Feldmann, Marco and Espe, Clemens and Plescher, Engelbert and Xu, Changsheng}, title = {IceMole - a maneuverable probe for clean in-situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems : extended abstract / SCAR Open Science Conference 2012, Session 29: Advancing Clean Technologies for Exploration of Glacial Aquatic Ecosystems}, year = {2012}, abstract = {The "IceMole" is a novel maneuverable subsurface ice probe for clean in-situ analysis and sampling of subsurface ice and subglacial water/brine. It is developed and build at FH Aachen University of Applied Sciences' Astronautical Laboratory. A first prototype was successfully tested on the Swiss Morteratsch glacier in 2010. Clean sampling is achieved with a hollow ice screw (as it is used in mountaineering) at the tip of the probe. Maneuverability is achieved with a differentially heated melting head. Funded by the German Space Agency (DLR), a consortium led by FH Aachen currently develops a much more advanced IceMole probe, which includes a sophisticated system for obstacle avoidance, target detection, and navigation in the ice. We intend to use this probe for taking clean samples of subglacial brine at the Blood Falls (McMurdo Dry Valleys, East Antarctica) for chemical and microbiological analysis. In our conference contribution, we 1) describe the IceMole design, 2) report the results of the field tests of the first prototype on the Morteratsch glacier, 3) discuss the probe's potential for the clean in-situ analysis and sampling of subsurface ice and subglacial liquids, and 4) outline the way ahead in the development of this technology.}, subject = {Eisschicht}, language = {en} } @inproceedings{DachwaldXuFeldmannetal.2011, author = {Dachwald, Bernd and Xu, Changsheng and Feldmann, Marco and Plescher, Engelbert}, title = {IceMole : Development of a novel subsurface ice probe and testing of the first prototype on the Morteratsch Glacier}, series = {EGU General Assembly 2011 Vienna | Austria | 03 - 08 April 2011}, booktitle = {EGU General Assembly 2011 Vienna | Austria | 03 - 08 April 2011}, year = {2011}, abstract = {We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named "IceMole", is currently developed, built, and tested at the FH Aachen University of Applied Sciences' Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).}, language = {en} } @inproceedings{BonneyHoefkenPaffenetal.2015, author = {Bonney, Gregor and H{\"o}fken, Hans-Wilhelm and Paffen, Benedikt and Schuba, Marko}, title = {ICS/SCADA Security - Analysis of a Beckhoff CX5020 PLC}, series = {1st International Conference on Information Systems Security and Privacy : ICISSP 2015}, booktitle = {1st International Conference on Information Systems Security and Privacy : ICISSP 2015}, organization = {International Conference on Information Systems Security and Privacy <1, 2015, Angers>}, pages = {1 -- 6}, year = {2015}, language = {en} } @inproceedings{KalbeKuropkaMeyerStorketal.1988, author = {Kalbe, Jochen and Kuropka, Rolf and Meyer-Stork, L. Sebastian and Lauter, S. L. and H{\"o}cker, Hartwig and Berndt, Heinz}, title = {Identification of fine animal hair via DNA analysis}, series = {Proceedings of the 1st International Symposium on Specialty Animal Fibers : Aachen, October 26 - 27, 1987 ; [scientific, technological and economical aspects] . - (Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V. ; 103)}, booktitle = {Proceedings of the 1st International Symposium on Specialty Animal Fibers : Aachen, October 26 - 27, 1987 ; [scientific, technological and economical aspects] . - (Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V. ; 103)}, editor = {K{\"o}rner, Andrea}, publisher = {Dt. Wollforschungsinst.}, address = {Aachen}, issn = {0930-3723}, pages = {221 -- 227}, year = {1988}, language = {en} } @inproceedings{BungValero2015, author = {Bung, Daniel B. and Valero, Daniel}, title = {Image processing for bubble image velocimetry in self-aerated flows}, series = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands}, booktitle = {E-proceedings of the 36th IAHR World Congress 28 June - 3 July, 2015, The Hague, the Netherlands}, organization = {IAHR World Congress <36, 2015, Den Haag>}, pages = {1 -- 8}, year = {2015}, language = {en} } @inproceedings{BungValero2016, author = {Bung, Daniel B. and Valero, Daniel}, title = {Image processing techniques for velocity estimation in highly aerated flows: bubble image velocimetry vs. optical flow}, series = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)}, booktitle = {Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)}, editor = {Dewals, Benjamin}, publisher = {CRC Press}, isbn = {978-1-138-02977-4}, doi = {10.1201/b21902-31}, pages = {151 -- 157}, year = {2016}, language = {en} } @inproceedings{KahmannHacklWegmannetal.2016, author = {Kahmann, Stephanie and Hackl, Michael and Wegmann, Kilian and M{\"u}ller, Lars-Peter and Staat, Manfred}, title = {Impact of a proximal radial shortening osteotomy on the distribution of forces and the stability of the elbow}, series = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen}, booktitle = {1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen}, editor = {Erni, Daniel}, publisher = {Universit{\"a}t Duisburg-Essen}, address = {Duisburg}, organization = {MedTech Symposium}, doi = {10.17185/duepublico/40821}, pages = {7 -- 8}, year = {2016}, abstract = {The human arm consists of the humerus (upper arm), the medial ulna and the lateral radius (forearm). The joint between the humerus and the ulna is called humeroulnar joint and the joint between the humerus and the radius is called humeroradial joint. Lateral and medial collateral ligaments stabilize the elbow. Statistically, 2.5 out of 10,000 people suffer from radial head fractures [1]. In these fractures the cartilage is often affected. Caused by the injured cartilage, degenerative diseases like posttraumatic arthrosis may occur. The resulting pain and reduced range of motion have an impact on the patient's quality of life. Until now, there has not been a treatment which allows typical loads in daily life activities and offers good long-term results. A new surgical approach was developed with the motivation to reduce the progress of the posttraumatic arthrosis. Here, the radius is shortened by 3 mm in the proximal part [2]. By this means, the load of the radius is intended to be reduced due to a load shift to the ulna. Since the radius is the most important stabilizer of the elbow it has to be confirmed that the stability is not affected. In the first test (Fig. 1 left), pressure distributions within the humeroulnar and humeroradial joints a native and a shortened radius were measured using resistive pressure sensors (I5076 and I5027, Tekscan, USA). The humerus was loaded axially in a tension testing machine (Z010, Zwick Roell, Germany) in 50 N steps up to 400 N. From the humerus the load is transmitted through both the radius and the ulna into the hand which is fixed on the ground. In the second test (Fig. 1 right), the joint stability was investigated using a digital image correlation system to measure the displacement of the ulna. Here, the humerus is fixed with a desired flexion angle and the unconstrained forearm lies on the ground. A rope connects the load actuator with a hook fixed in the ulna. A guide roller is used so that the rope pulls the ulna horizontally when a tensile load is applied. This creates a moment about the elbow joint with a maximum value of 7.5 Nm. Measurements were performed with varying flexion angles (0°, 30°, 60°, 90°, 120°). For both tests and each measurement, seven specimens were used. Student's t-test was employed to determine whether the mean values of the measurements in native specimen and operated specimens differ significantly.}, language = {en} } @inproceedings{SchwagerAngeleNourietal.2022, author = {Schwager, Christian and Angele, Florian and Nouri, Bijan and Schwarzb{\"o}zl, Peter and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf}, title = {Impact of DNI forecast quality on performance prediction for a commercial scale solar tower: Application of nowcasting DNI maps to dynamic solar tower simulation}, series = {SolarPACES conference proceedings}, booktitle = {SolarPACES conference proceedings}, number = {Vol. 1}, publisher = {TIB Open Publishing}, address = {Hannover}, issn = {2751-9899 (online)}, doi = {10.52825/solarpaces.v1i.675}, pages = {9 Seiten}, year = {2022}, abstract = {Concerning current efforts to improve operational efficiency and to lower overall costs of concentrating solar power (CSP) plants with prediction-based algorithms, this study investigates the quality and uncertainty of nowcasting data regarding the implications for process predictions. DNI (direct normal irradiation) maps from an all-sky imager-based nowcasting system are applied to a dynamic prediction model coupled with ray tracing. The results underline the need for high-resolution DNI maps in order to predict net yield and receiver outlet temperature realistically. Furthermore, based on a statistical uncertainty analysis, a correlation is developed, which allows for predicting the uncertainty of the net power prediction based on the corresponding DNI forecast uncertainty. However, the study reveals significant prediction errors and the demand for further improvement in the accuracy at which local shadings are forecasted.}, language = {en} } @inproceedings{FingerBraunBil2019, author = {Finger, Felix and Braun, Carsten and Bil, Cees}, title = {Impact of Engine Failure Constraints on the Initial Sizing of Hybrid-Electric GA Aircraft}, series = {AIAA Scitech 2019 Forum}, booktitle = {AIAA Scitech 2019 Forum}, doi = {10.2514/6.2019-1812}, year = {2019}, language = {en} } @inproceedings{LudowicyRingsFingeretal.2019, author = {Ludowicy, Jonas and Rings, Ren{\´e} and Finger, Felix and Braun, Carsten and Bil, Cees}, title = {Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft}, series = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019}, booktitle = {Asia Pacific International Symposium on Aerospace Technology. APISAT 2019}, pages = {14 Seiten}, year = {2019}, language = {en} } @inproceedings{AuthCzarneckiBensberg2019, author = {Auth, Gunnar and Czarnecki, Christian and Bensberg, Frank}, title = {Impact of robotic process automation on enterprise architectures}, series = {GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beitr{\"a}ge}, booktitle = {GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beitr{\"a}ge}, editor = {Draude, Claude and Lange, Martin and Sick, Bernhard and Gesellschaft f{\"u}r Informatik e.V. (GI),}, publisher = {K{\"o}llen}, address = {Bonn}, isbn = {9783885796893}, issn = {1617-5468}, doi = {10.18420/inf2019_ws05}, pages = {59 -- 65}, year = {2019}, abstract = {The initial idea of Robotic Process Automation (RPA) is the automation of business processes through the presentation layer of existing application systems. For this simple emulation of user input and output by software robots, no changes of the systems and architecture is required. However, considering strategic aspects of aligning business and technology on an enterprise level as well as the growing capabilities of RPA driven by artificial intelligence, interrelations between RPA and Enterprise Architecture (EA) become visible and pose new questions. In this paper we discuss the relationship between RPA and EA in terms of perspectives and implications. As workin- progress we focus on identifying new questions and research opportunities related to RPA and EA.}, language = {en} } @inproceedings{OberlaenderArreolaHansenetal.2017, author = {Oberl{\"a}nder, Jan and Arreola, Julio and Hansen, Christina and Greeff, Anton and Mayer, Marlena and Keusgen, Michael and Sch{\"o}ning, Michael Josef}, title = {Impedimetric Biosensor to Enable Fast Evaluation of Gaseous Sterilization Processes}, series = {MDPI Proceedings}, volume = {1}, booktitle = {MDPI Proceedings}, number = {4}, doi = {10.3390/proceedings1040435}, pages = {4 Seiten}, year = {2017}, language = {en} } @inproceedings{HellmannsBoehmDilger2006, author = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus}, title = {Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control}, series = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida}, booktitle = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida}, publisher = {Adhesion Society}, address = {Blacksburg, Va.}, organization = {Adhesion Society}, issn = {1086-9506}, pages = {68 -- 70}, year = {2006}, language = {en} } @inproceedings{EngemannBadriWenningetal.2019, author = {Engemann, Heiko and Badri, Sriram and Wenning, Marius and Kallweit, Stephan}, title = {Implementation of an Autonomous Tool Trolley in a Production Line}, series = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980}, booktitle = {Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-19648-6}, doi = {10.1007/978-3-030-19648-6_14}, pages = {117 -- 125}, year = {2019}, language = {en} } @inproceedings{NixFrotscherStaat2012, author = {Nix, Yvonne and Frotscher, Ralf and Staat, Manfred}, title = {Implementation of the edge-based smoothed extended finite element method}, series = {Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012}, booktitle = {Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012}, editor = {Eberhardsteiner, J.}, year = {2012}, language = {en} } @inproceedings{DoeringFeldmannKuhnhenneetal.2008, author = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus and Hellberg, Jan}, title = {Implementing a thermal activation system into a light-weight steel deck element}, series = {Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...}, booktitle = {Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...}, publisher = {ECCS, European Convention for Construction Steelwork}, address = {Brussels}, organization = {Eurosteel <5, 2008, Graz>}, isbn = {92-0147-000-90}, pages = {941 -- 946}, year = {2008}, language = {en} } @inproceedings{ReisgenSchoeneSchleseretal.2009, author = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Gries, Thomas and Glowania, Michael}, title = {Impregnated textile reinforcements for concrete applications}, series = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009}, booktitle = {European Coatings Congress : N{\"u}rnberg, Germany, 30.3. - 1.4. 2009}, pages = {7 S.}, year = {2009}, language = {en} } @inproceedings{SeilerPichlerPfaffetal.2008, author = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and George, Alfred and Srulijes, Julio}, title = {Improved Doppler picture velocimetry and new automated processing}, series = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008}, booktitle = {14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008}, organization = {International Symposium on Applications of Laser Techniques to Fluid Mechanics <14, 2008, Lisboa>}, pages = {1 -- 12}, year = {2008}, language = {en} } @inproceedings{SchwagerTeixeiraBouraFleschetal.2019, author = {Schwager, Christian and Teixeira Boura, Cristiano Jos{\´e} and Flesch, Robert and Alexopoulos, Spiros and Herrmann, Ulf}, title = {Improved efficiency prediction of a molten salt receiver based on dynamic cloud passage simulation}, series = {AIP Conference Proceedings}, volume = {2126}, booktitle = {AIP Conference Proceedings}, number = {1}, isbn = {978-0-7354-1866-0}, doi = {10.1063/1.5117566}, pages = {030054-1 -- 030054-8}, year = {2019}, language = {en} } @inproceedings{DiltheyMundRaupachetal.2004, author = {Dilthey, Ulrich and Mund, F. and Raupach, Michael and Schleser, Markus and Walk-Lauffer, Bernd}, title = {Improvement of textile reinforced concrete by polymer additives}, series = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch}, booktitle = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch}, publisher = {BAM}, address = {Berlin}, isbn = {3-00-013706-8}, pages = {469 -- 476}, year = {2004}, language = {en} } @inproceedings{SchleserDiltheyMundetal.2007, author = {Schleser, Markus and Dilthey, Ulrich and Mund, F. and B{\"o}hm, Stefan}, title = {Improvement of textile reinforced concrete by use of polymers}, series = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)}, booktitle = {Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)}, editor = {Czarnecki, Lech and Garbacz, Andrzej}, publisher = {Aedificatio Publ.}, address = {Freiburg}, isbn = {978-3-931681-89-0}, pages = {153 -- 162}, year = {2007}, language = {en} } @inproceedings{DoeringSedlacek2004, author = {D{\"o}ring, Bernd and Sedlacek, Gerhard}, title = {Improvement of thermal comfort in light weight buildings made of steel with new concepts for slab systems}, series = {10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings}, booktitle = {10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings}, publisher = {Danish Steel Inst.}, address = {Copenhagen}, organization = {Nordic Steel Construction Conference <10, 2004, Copenhagen>}, pages = {35 -- 44}, year = {2004}, language = {en} } @inproceedings{NiemuellerNeumannHenkeetal.2017, author = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {Improvements for a robust production in the RoboCup logistics league 2016}, series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.}, booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-68792-6}, doi = {10.1007/978-3-319-68792-6_49}, pages = {589 -- 600}, year = {2017}, language = {en} } @inproceedings{AlhwarinFerreinGebhardtetal.2015, author = {Alhwarin, Faraj and Ferrein, Alexander and Gebhardt, Andreas and Kallweit, Stephan and Scholl, Ingrid and Tedjasukmana, Osmond Sanjaya}, title = {Improving additive manufacturing by image processing and robotic milling}, series = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden}, booktitle = {2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden}, doi = {10.1109/CoASE.2015.7294217}, pages = {924 -- 929}, year = {2015}, language = {en} } @inproceedings{MeckMuellerAltherretal.2020, author = {Meck, Marvin M. and M{\"u}ller, Tim M. and Altherr, Lena and Pelz, Peter F.}, title = {Improving an industrial cooling system using MINLP, considering capital and operating costs}, series = {Operations Research Proceedings 2019}, booktitle = {Operations Research Proceedings 2019}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-48438-5 (Print)}, doi = {10.1007/978-3-030-48439-2_61}, pages = {505 -- 512}, year = {2020}, abstract = {The chemical industry is one of the most important industrial sectors in Germany in terms of manufacturing revenue. While thermodynamic boundary conditions often restrict the scope for reducing the energy consumption of core processes, secondary processes such as cooling offer scope for energy optimisation. In this contribution, we therefore model and optimise an existing cooling system. The technical boundary conditions of the model are provided by the operators, the German chemical company BASF SE. In order to systematically evaluate different degrees of freedom in topology and operation, we formulate and solve a Mixed-Integer Nonlinear Program (MINLP), and compare our optimisation results with the existing system.}, language = {en} } @inproceedings{ThomaFisherBraun2020, author = {Thoma, Andreas and Fisher, Alex and Braun, Carsten}, title = {Improving the px4 avoid algorithm by bio-inspired flight strategies}, series = {DLRK2020 - „Luft- und Raumfahrt - Verantwortung in allen Dimensionen"}, booktitle = {DLRK2020 - „Luft- und Raumfahrt - Verantwortung in allen Dimensionen"}, pages = {10 Seiten}, year = {2020}, language = {en} } @inproceedings{WeberPorschenDietzeletal.1978, author = {Weber, Hans-Joachim and Porschen, W. and Dietzel, F. and [u.a.],}, title = {In vivo analysis of the influence of combined hyperthermia and gamma irradiation on euoxic and hypoxic tumor cells}, series = {Cancer therapy by hyperthermia and radiation : [proceedings of the 2. International Symposium on Cancer Therapy by Hyperthermia and Radiation, Essen, 2.-4.6.1977]}, booktitle = {Cancer therapy by hyperthermia and radiation : [proceedings of the 2. International Symposium on Cancer Therapy by Hyperthermia and Radiation, Essen, 2.-4.6.1977]}, editor = {Streffer, Christian}, publisher = {Urban and Schwarzenberg}, address = {Baltimore ; Munich [u.a.]}, isbn = {0-8067-1701-7}, pages = {276 -- 277}, year = {1978}, language = {en} } @inproceedings{RichterBraunsteinStaeudleetal.2018, author = {Richter, Charlotte and Braunstein, Bjoern and St{\"a}udle, Benjamin and Attias, Julia and Suess, Alexander and Weber, T. and Rittweger, Joern and Green, David A. and Albracht, Kirsten}, title = {In vivo fascicle length of the gastrocnemius muscle during walking in simulated martian gravity using two different body weight support devices}, series = {23rd Annual Congress of the European College of Sport Science, Dublin, Irland}, booktitle = {23rd Annual Congress of the European College of Sport Science, Dublin, Irland}, year = {2018}, language = {en} } @inproceedings{NeuJanserKhatibietal.2016, author = {Neu, Eugen and Janser, Frank and Khatibi, Akbar A. and Orifici, Adrian C.}, title = {In-flight vibration-based structural health monitoring of aircraft wings}, series = {30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea}, booktitle = {30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea}, pages = {10 Seiten}, year = {2016}, abstract = {This work presents a methodology for automated damage-sensitive feature extraction and anomaly detection under multivariate operational variability for in-flight assessment of wings. The method uses a passive excitation approach, i. e. without the need for artificial actuation. The modal system properties (natural frequencies and damping ratios) are used as damage-sensitive features. Special emphasis is placed on the use of Fiber Bragg Grating (FBG) sensing technology and the consideration of Operational and Environmental Variability (OEV). Measurements from a wind tunnel investigation with a composite cantilever equipped with FBG and piezoelectric sensors are used to successfully detect an impact damage. In addition, the feasibility of damage localisation and severity estimation is evaluated based on the coupling found between damageand OEV-induced feature changes.}, language = {en} } @inproceedings{DigelLeimenaDachwaldetal.2010, author = {Digel, Ilya and Leimena, W. and Dachwald, Bernd and Linder, Peter and Porst, Dariusz and Kayser, Peter and Funke, O. and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard}, title = {In-situ biological decontamination of an ice melting probe : [abstract]}, year = {2010}, abstract = {The objective of our study was to investigate the efficacy of different in-situ decontamination protocols in the conditions of thermo-mechanical ice-melting.}, subject = {Sonde}, language = {en} } @inproceedings{GoemmelFrauenrathOttenetal.2010, author = {G{\"o}mmel, Andreas and Frauenrath, Tobias and Otten, Mario and Niendorf, Thoralf and Butenweg, Christoph}, title = {In-vivo measurements of vocal fold geometry using Magnetic Resonance Imaging}, series = {Fortschritte der Akustik - DAGA 2010 36. Jahrestagung f{\"u}r Akustik, 15. bis 18. M{\"a}rz 2010 in Berlin}, booktitle = {Fortschritte der Akustik - DAGA 2010 36. Jahrestagung f{\"u}r Akustik, 15. bis 18. M{\"a}rz 2010 in Berlin}, editor = {M{\"o}ser, Michael and Schulte-Fortkamp, Brgitte and Ochmann, Martin}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik}, address = {Berlin}, isbn = {978-3-9808659-8-2}, year = {2010}, language = {de} } @inproceedings{ThenentDahmann2011, author = {Thenent, N. E. and Dahmann, Peter}, title = {Increasing aircraft design flexibility - The development of a hydrostatic transmission for gliders with self-launching capability}, series = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband}, publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, isbn = {978-3-9321-8274-7}, pages = {865 -- 883}, year = {2011}, language = {en} } @inproceedings{NiemuellerLakemeyerFerrein2013, author = {Niem{\"u}ller, Tim and Lakemeyer, Gerhard and Ferrein, Alexander}, title = {Incremental task-level reasoning in a competitive factory automation scenario}, series = {Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)}, booktitle = {Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)}, editor = {Boots, Byron}, organization = {American Association for Artificial Intelligence}, isbn = {9781577356011}, pages = {43 -- 48}, year = {2013}, language = {en} } @inproceedings{HoeflingSchirraSpohretal.2013, author = {Hoefling, J. and Schirra, Julian and Spohr, A. and Sch{\"a}fer, D.}, title = {Induced drag computation with wake model schemes for highly non-planar wing systems}, series = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart}, publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, organization = {Deutscher Luft- und Raumfahrtkongress <62, 2013, Stuttgart>}, pages = {1 -- 10}, year = {2013}, language = {en} } @inproceedings{Wollert2016, author = {Wollert, J{\"o}rg}, title = {Industrie 4.0 - warten bis die Revolution vorbei ist?}, series = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, booktitle = {Automatisierung im Fokus von Industrie 4.0 : Tagungsband AALE 2016 ; 13. Fachkonferenz, L{\"u}beck}, publisher = {DIV Deutscher Industrieverlag GmbH}, address = {M{\"u}nchen}, isbn = {978-3-8356-7312-0}, pages = {127 -- 136}, year = {2016}, language = {de} } @inproceedings{Engels2013, author = {Engels, Elmar}, title = {Industrieantriebe mit sercos Schnittstelle {\"u}ber MATLAB steuern}, series = {Tagungsband AALE 2013 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund}, booktitle = {Tagungsband AALE 2013 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund}, publisher = {DIV Dt. Industrieverl.}, address = {M{\"u}nchen}, isbn = {978-3-8356-3364-3}, pages = {223 -- 232}, year = {2013}, language = {de} } @inproceedings{HecklWeilerFleischhakeretal.2014, author = {Heckl, O. H. and Weiler, Sascha and Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Russ, S. and Kumkar, M. and Sutter, Dirk H.}, title = {Industry-grade high average power femtosecond light source}, series = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)}, booktitle = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)}, editor = {Heisterkamp, Alexander and Herman, Peter R. and Meunier, Michael and Nolte, Stefan}, publisher = {SPIE, International Society for Optical Engineering}, doi = {10.1117/12.2039337}, pages = {89720P -- 89720P-7}, year = {2014}, language = {en} } @inproceedings{SauerbornArshadiRohrmoser2012, author = {Sauerborn, Markus and Arshadi, S. and Rohrmoser, R.}, title = {Influence of clouds and aerosols to the haze of the sunshape}, series = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5}, booktitle = {30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5}, publisher = {Curran}, address = {Red Hook, NY}, organization = {International Solar Energy Society}, pages = {3887 -- 3894}, year = {2012}, language = {en} } @inproceedings{ŠakićMilijašMarinkovićetal.2021, author = {Šakić, Bogdan and Milijaš, Aleksa and Marinković, Marko and Butenweg, Christoph and Klinkel, Sven}, title = {Influence of prior in-plane damage on the out-of-plane response of non-load bearing unreinforced masonry walls under seismic load}, series = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering}, booktitle = {8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering}, editor = {Papadrakakis, Manolis and Fragiadakis, Michalis}, publisher = {National Technical University of Athens}, address = {Athen}, isbn = {9786188507258}, issn = {2623-3347}, doi = {10.7712/120121.8527.18913}, pages = {808 -- 828}, year = {2021}, abstract = {Reinforced concrete frames with masonry infill walls are popular form of construction all over the world as well in seismic regions. While severe earthquakes can cause high level of damage of both reinforced concrete and masonry infills, earthquakes of lower to medium intensity some-times can cause significant level of damage of masonry infill walls. Especially important is the level of damage of face loaded infill masonry walls (out-of-plane direction) as out-of-plane load cannot only bring high level of damage to the wall, it can also be life-threating for the people near the wall. The response in out-of-plane direction directly depends on the prior in-plane damage, as previous investigation shown that it decreases resistance capacity of the in-fills. Behaviour of infill masonry walls with and without prior in-plane load is investigated in the experimental campaign and the results are presented in this paper. These results are later compared with analytical approaches for the out-of-plane resistance from the literature. Conclusions based on the experimental campaign on the influence of prior in-plane damage on the out-of-plane response of infill walls are compared with the conclusions from other authors who investigated the same problematic.}, language = {en} } @inproceedings{ZillerDoering2003, author = {Ziller, Claudia and D{\"o}ring, Bernd}, title = {Influence of the external dynamic wind pressure on the ventilation of double facades}, series = {Research in building physics: proceedings of the Second International Conference on Building Physics : Leuven, Belgium, 14-18 September 2003}, booktitle = {Research in building physics: proceedings of the Second International Conference on Building Physics : Leuven, Belgium, 14-18 September 2003}, editor = {Carmeliet, J. and Hens, H. and Vermeir, G.}, publisher = {Taylor and Francis}, address = {Hoboken}, organization = {International Conference on Building Physics <2, 2003, Leuven>}, isbn = {9058095657, 9789058095657}, pages = {527 -- 533}, year = {2003}, language = {en} } @inproceedings{FingerGoettenBraun2018, author = {Finger, Felix and G{\"o}tten, Falk and Braun, Carsten}, title = {Initial Sizing for a Family of Hybrid-Electric VTOL General Aviation Aircraft}, series = {67. Deutscher Luft- und Raumfahrtkongress 2018}, booktitle = {67. Deutscher Luft- und Raumfahrtkongress 2018}, pages = {14 S.}, year = {2018}, language = {en} } @inproceedings{FrickeZiolkoAnthrakidisetal.2012, author = {Fricke, Barbara and Ziolko, C. and Anthrakidis, Anette and Alexopoulos, Spiros and Hoffschmidt, Bernhard and Giese, F. and Dillig, M.}, title = {InnoSol - environmental aspects of the open volumetric receiver technology}, series = {30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5}, booktitle = {30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5}, publisher = {Curran}, address = {Red Hook, NY}, organization = {International Solar Energy Society}, pages = {3895 -- 3900}, year = {2012}, language = {en} } @inproceedings{FrickeZiolkoAnthrakidisetal.2011, author = {Fricke, Barbara and Ziolko, C. and Anthrakidis, Anette and Alexopoulos, Spiros and Hoffschmidt, Bernhard and Dillig, M. and Giese, F.}, title = {InnoSol - life cycle analysis of solar power tower plants}, series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain}, booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain}, address = {Granada}, pages = {1 CD-ROM}, year = {2011}, language = {en} } @inproceedings{SteuerDankertLeichtScholten2017, author = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen}, title = {Innovation and Diversity : Integrating new perspectives into research associations}, series = {12th European Conference on Innovation and Entrepreneurship (ECIE 2017) : Paris, France, 21-22 September 2017}, booktitle = {12th European Conference on Innovation and Entrepreneurship (ECIE 2017) : Paris, France, 21-22 September 2017}, isbn = {978-1-911218-54-8}, pages = {767 -- 776}, year = {2017}, abstract = {The link between diversity and innovation is broadly discussed in the context of research and innovation processes. Many institutions and enterprises, specifically in commerce, have already tried to establish sustainable diversity management concepts, in order to increase the diversity of their workforce in addition to establishing a corporate culture of openness. Alongside the creation of a working place where different experiences and skills are valued equally, the entrepreneurial intention is to transfer diversity into economically relevant advantages. Taking into account the potential of diversity in research and innovation processes, the project "Diversity- and Innovation Management" was incorporated within a large interdisciplinary research Cluster. The project's purpose was to study the context between diversity and innovation in research associations and to later develop a customised management concept into an interdisciplinary research Cluster on integrative production technology with full integration. The challenge of such research associations lays in an organisational structure which is often described as being decentralised. Researchers coming from different academic disciplines, while having diverse habits, conduct research on large scientific issues and challenges. In addition, these researchers are socialised in different institutions and university chairs. Theses differences in leadership styles, business cultures and organisational strategies, follow into their research team work. Taking a closer look into the management of human resources suggests that decentral organised recruitment processes, as well as allocation of human resources, lead to a lacking overview in regard to missing competencies, perspectives and backgrounds in research networks. These circumstances are comparable to big corporate groups. While developing a management concept for research associations, these characteristics must be considered. To ensure this, the project follows a human-centred approach, which considers top-down, as well as bottom-up perspectives. This paper presents the applied mixed-method approach in the scientific issue described above. In the frame of the Cluster of Excellence "Integrative Production Technology for High-Wage Countries" research results based on quantitative, as well as qualitative studies, were presented as an application example. This paper provides a new perspective on the innovation and diversity context. Against the background of complex research organisations, the development approach of a management concept is particularly interesting.}, language = {en} } @inproceedings{SteuerDankertSharmaBlecketal.2017, author = {Steuer-Dankert, Linda and Sharma, Mamta Rameshwarlal and Bleck, Wolfgang and Leicht-Scholten, Carmen}, title = {Innovation through Diversity - Development of a Diversity and Innovation management concept}, series = {International Conference on Innovation and Management : IAM23017S : Date: July 4-7, 2017, Osaka, Japan}, booktitle = {International Conference on Innovation and Management : IAM23017S : Date: July 4-7, 2017, Osaka, Japan}, editor = {Farn, C. K.}, publisher = {Kuang Hui Chiu}, address = {Osaka}, issn = {2218-6387}, pages = {Panel C}, year = {2017}, abstract = {Acknowledging that a diverse workforce could be a potential source of innovation, the current research deals with the fine details of why diversity management is central to achieving innovation in heterogeneous research groups and how this could be effectively realized in an organization. The types of heterogeneities addressed mainly include gender, qualification, academic discipline and intercultural perspectives. The type of organization being dealt with in this work is a complex association of research institutes at a technical university in Germany (RWTH Aachen University), namely a 'Cluster of Excellence', whereby several institutes of the university work collaboratively in different sub-projects. The 'Cluster of Excellence' is a part of the 'Excellence Initiative' of the German federal and state governments German Research Foundation (DFG) and German Council of Science and Humanities, with the ultimate aim of promoting cutting-edge research. To support interdisciplinary collaboration and thus the performance of the cluster, the development of a diversity and innovation management concept is presently in the conceptual phase and will be described in the frame of this paper. The 3-S-Diversity Model, composed of the three elements: skills, structure and strategy, serves as a basis for the development of the concept. The proposed concept consists of six phases; the first two phases lay the ground work by developing an understanding of the status quo on the forms of diversity in the Cluster of Excellence, the type of organizational structure of the member institutes and the varieties of specialist work cultures of the same. The third and the fourth phases build up on this foundation by means of qualitative and quantitative studies. While the third phase deals with the sensitization of the management level to the close connection between diversity and innovation; the need to manage them thereafter and find tailor-made methods of doing so, the fourth phase shall mainly focus on the mindset of the employees in this regard. The fifth phase shall consolidate the learnings and the ideas developed in the course of the first four phases into an implementable strategy. The ultimate phase shall be the implementation of this concept in the Cluster. The first three phases have been accomplished successfully and the preliminary results are already available.}, language = {en} } @inproceedings{ButenwegMarinkovićKubalskietal.2017, author = {Butenweg, Christoph and Marinković, Marko and Kubalski, Thomas and Fehling, Ekkehard and Pfetzing, Thomas and Meyer, Udo}, title = {Innovative Ans{\"a}tze f{\"u}r die seismische Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk}, series = {Vortragsband der 15. D-A-CH-Tagung Erdbebeningenieurwesen und Baudynamik}, booktitle = {Vortragsband der 15. D-A-CH-Tagung Erdbebeningenieurwesen und Baudynamik}, editor = {Zabel, Volkmar and Beinersdorf, Silke}, publisher = {Deutsche Gesellschaft f{\"u}r Erdbebeningenieurwesen und Baudynamik (DGEB) e.V.}, address = {Weimar}, isbn = {978-3-930108-13-5}, pages = {130 -- 145}, year = {2017}, language = {de} } @inproceedings{GerhardsSchleserOttenetal.2019, author = {Gerhards, Benjamin and Schleser, Markus and Otten,, Christian and Schwarz, Alexander and Gebhardt, Andreas}, title = {Innovative Laser Beam Joining Technology for Additive Manufactured Parts}, series = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, booktitle = {Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava}, pages = {1 -- 8}, year = {2019}, language = {en} } @inproceedings{OttenGerhardsSchleseretal.2019, author = {Otten, Christian and Gerhards, Benjamin and Schleser, Markus and Schwarz, A. and Gebhardt, Andreas}, title = {Innovative Laserschweißtechnologie f{\"u}r additiv gefertigte Bauteile}, series = {Große Schweißtechnische Tagung}, booktitle = {Große Schweißtechnische Tagung}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, isbn = {978-3-96144-066-5}, pages = {150 -- 157}, year = {2019}, language = {de} } @inproceedings{HuthElsenHartwigetal.2006, author = {Huth, Thomas and Elsen, Olaf and Hartwig, Christoph and Esch, Thomas}, title = {Innovative modular valve trains for 2015 - logistic benefits by EMVT}, series = {IFAC Proceedings Volumes, Volume 39, Issue 3}, booktitle = {IFAC Proceedings Volumes, Volume 39, Issue 3}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.3182/20060517-3-FR-2903.00172}, pages = {315 -- 320}, year = {2006}, abstract = {In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.}, language = {en} } @inproceedings{MarinkovicButenweg2018, author = {Marinkovic, Marko and Butenweg, Christoph}, title = {Innovative System for Earthquake Resistant Masonry Infill Walls}, series = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018}, booktitle = {16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018}, pages = {1 -- 12}, year = {2018}, language = {en} } @inproceedings{KolkmannGriesSchleseretal.2005, author = {Kolkmann, Annette and Gries, Thomas and Schleser, Markus and Dilthey, Ulrich}, title = {Innovative yarn structures and coatings for textile reinforced concrete}, series = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main}, booktitle = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main}, address = {Frankfurt a.M.}, pages = {1 CD-ROM}, year = {2005}, language = {en} } @inproceedings{RoethTragsdorf2004, author = {R{\"o}th, Thilo and Tragsdorf, Carsten}, title = {Innovativer Einsatz von Werkstoffen - Trends und Entwicklungen im Karosserieleichtbau}, year = {2004}, abstract = {1) In Karosseriestrukturen steht der richtige Werkstoffeinsatz st{\"a}rker den je im Spannungsfeld von Leichtbau, Kosten (St{\"u}ckzahlen) und Leistungsanforderung 2) In „klassischen" Strukturen von Modultr{\"a}gern und Klappen hat sich die Materialmischbauweise verst{\"a}rkt in den letzten Jahren durchgesetzt 3) Unter Aspekten des konzeptionellen Leichtbaus erscheint der verst{\"a}rkte Einsatz von Leichtbauwerkstoffen im Vorderwagen sowie in der Dachstruktur zielf{\"u}hrend 4) Offene Strukturprofile in Materialmischbauweise liefern f{\"u}r eine Vielzahl von Anwendungen ein interessantes und bis dato kaum genutztes Potential 5) Neue Entwicklungen bei den F{\"u}getechnologien (i.b. kontinuierliche F{\"u}geverbindungen und kombinierte Verfahren) unterst{\"u}tzen den wirtschaftlichen Karosserieleichtbau 6) Werkstoffinnovationen sowie neuartige Fertigungsverfahren machen den Konstruktionswerkstoff „Stahl" auch in der Zukunft im Karosseriebau weiterhin sehr attraktiv}, subject = {Karosseriebau}, language = {de} } @inproceedings{ButenwegMeyerFehling2014, author = {Butenweg, Christoph and Meyer, Udo and Fehling, Ekkehard}, title = {INSYSME: first activities of the German partners}, series = {9th International Masonry Conference 2014 in Guimaraes, Portugal, 2014}, booktitle = {9th International Masonry Conference 2014 in Guimaraes, Portugal, 2014}, year = {2014}, language = {en} } @inproceedings{Butenweg2021, author = {Butenweg, Christoph}, title = {Integrated approach for monitoring and management of buildings with digital building models and modern sensor technologies}, series = {Civil Engineering 2021 - Achievements and Visions: Proceedings of the International Conferenecs celebrating 175th Anniversary of the Faculty of Civil Engineering, University of Belgrade, October 25 - 26, 2021 Belgrade, Serbia}, booktitle = {Civil Engineering 2021 - Achievements and Visions: Proceedings of the International Conferenecs celebrating 175th Anniversary of the Faculty of Civil Engineering, University of Belgrade, October 25 - 26, 2021 Belgrade, Serbia}, editor = {Kuzmanović, Vladan and Ignjatović, Ivan}, publisher = {University of Belgrade}, address = {Belgrade}, year = {2021}, language = {en} } @inproceedings{SchuermannMannBudaetal.2009, author = {Sch{\"u}rmann, Volker and Mann, Thorsten and Buda, Aurel and Wollert, J{\"o}rg}, title = {Integrating bluetooth localization into existing TCP/IP networks}, series = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009}, booktitle = {IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Workshop on Intelligent Data Acquisition and Advanced Computing Systems <5, 2009, Rende, Cosenza, Italy>}, isbn = {978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9}, doi = {10.1109/IDAACS.2009.5342903}, pages = {621 -- 624}, year = {2009}, language = {en} } @inproceedings{KirschMatareFerreinetal.2020, author = {Kirsch, Maximilian and Matar{\´e}, Victor and Ferrein, Alexander and Schiffer, Stefan}, title = {Integrating golog++ and ROS for Practical and Portable High-level Control}, series = {12th International Conference on Agents and Artificial Intelligence}, booktitle = {12th International Conference on Agents and Artificial Intelligence}, doi = {10.5220/0008984406920699}, year = {2020}, language = {en} } @inproceedings{DrummLemckeOberle2006, author = {Drumm, Christian and Lemcke, Jens and Oberle, Daniel}, title = {Integrating Semantic Web Services and Business Process Management: A Real Use Case}, series = {Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006}, booktitle = {Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006}, pages = {15 Seiten}, year = {2006}, language = {en} } @inproceedings{WiezikHoetterGebhardt2015, author = {Wiezik, P. and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas}, title = {Integration des Laserpolierens in den SLM-Prozess}, series = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015}, volume = {315}, booktitle = {DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, F{\"u}gen von faserverst{\"a}rkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vortr{\"a}ge der Veranstaltungen, N{\"u}rnberg, DE, 15.-17. Sep, 2015}, publisher = {Verl. f{\"u}r Schweißen und verwandte Verfahren, DVS-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-945023-46-4}, pages = {117 -- 120}, year = {2015}, language = {de} } @inproceedings{HueningMund2023, author = {H{\"u}ning, Felix and Mund, Cindy}, title = {Integration of agile development in standard labs}, series = {51st Annual Conference of the European Society for Engineering Education (SEFI)}, booktitle = {51st Annual Conference of the European Society for Engineering Education (SEFI)}, doi = {10.21427/NK4Z-WS73}, pages = {11 Seiten}, year = {2023}, abstract = {In addition to the technical content, modern courses at university should also teach professional skills to enhance the competencies of students towards their future work. The competency driven approach including technical as well as professional skills makes it necessary to find a suitable way for the integration into the corresponding module in a scalable and flexible manner. Agile development, for example, is essential for the development of modern systems and applications and makes use of dedicated professional skills of the team members, like structured group dynamics and communication, to enable the fast and reliable development. This paper presents an easy to integrate and flexible approach to integrate Scrum, an agile development method, into the lab of an existing module. Due to the different role models of Scrum the students have an individual learning success, gain valuable insight into modern system development and strengthen their communication and organization skills. The approach is implemented and evaluated in the module Vehicle Systems, but it can be transferred easily to other technical courses as well. The evaluation of the implementation considers feedback of all stakeholders, students, supervisor and lecturers, and monitors the observations during project lifetime.}, language = {en} } @inproceedings{UlmerLaiChengetal.2019, author = {Ulmer, Jessica and Lai, Chow Yin and Cheng, Chi-Tsun and Wollert, J{\"o}rg}, title = {Integration von VR und AR in Produktlebenszyklen - Eine {\"U}bersicht {\"u}ber die Nutzung virtueller Technologien im industriellen Umfeld}, series = {Automation 2019}, booktitle = {Automation 2019}, pages = {1 -- 12}, year = {2019}, language = {de} } @inproceedings{ReisgenSchleserMokrovetal.2009, author = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam and Schmidt, Andre and Rossiter, Eduardo}, title = {Integrative Berechnung von Verzug und Eigenspannungen auf Basis realer Schweißparameter}, series = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar}, booktitle = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar}, editor = {Hildebrand, J{\"o}rg}, publisher = {Univ.-Verl.}, address = {Weimar}, isbn = {978-3-86068-401-6}, pages = {32 -- 41}, year = {2009}, language = {de} } @inproceedings{Rohde2007, author = {Rohde, Raju M.}, title = {Integrierte Implizite Kanalnetzberechnung mit BaSYS-HydroCAD}, year = {2007}, abstract = {Dr.-Ing. Raju M. Rohde , Dorsch Consult Wasser und Umwelt GmbH, M{\"u}nchen mit 32 Folien (S. 103-134). Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen>. Das System BaSYS.L.E.O. Ganglinien-Volumen-Methode Hydrodynamische Kanalnetzberechnung Hydraulische Objekte Hydrodynamische Schmutzfrachtberechnung}, subject = {Kanalisation}, language = {de} } @inproceedings{SchuermannLeidingerWollert2010, author = {Sch{\"u}rmann, Volker and Leidinger, Rafael and Wollert, J{\"o}rg}, title = {Intelligent IO-Terminals for complex communication scenarios in control applications}, series = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA}, booktitle = {Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA}, organization = {International Multi-Conference on Engineering and Technological Innovation <3, 2010, Orlando, Fla.>}, pages = {1 -- 5}, year = {2010}, language = {de} } @inproceedings{AltayKlinkelButenweg2014, author = {Altay, Okyay and Klinkel, Sven and Butenweg, Christoph}, title = {Intelligente semiaktive D{\"a}mpfungssysteme zur Reduktion periodischer und stochastischer Bauwerksschwingungen}, series = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...}, booktitle = {Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universit{\"a}t M{\"u}nchen / Hrsg. Kai-Uwe Bletzinger ...}, publisher = {Lehrstuhl f{\"u}r Statik, Techn. Univ. M{\"u}nchen}, address = {M{\"u}nchen}, organization = {Fachtagung Baustatik - Baupraxis <12, 2014, M{\"u}nchen>}, isbn = {978-3-00-041256-1}, pages = {397 -- 404}, year = {2014}, language = {de} } @inproceedings{KraftWilhelms2004, author = {Kraft, Bodo and Wilhelms, N.}, title = {Interactive distributed knowledge support for conceptual building design}, isbn = {3-86068-213-X}, year = {2004}, abstract = {In: Net-distributed Co-operation : Xth International Conference on Computing in Civil and Building Engineering, Weimar, June 02 - 04, 2004 ; proceedings / [ed. by Karl Beuke ...] . - Weimar: Bauhaus-Univ. Weimar 2004. - 1. Aufl. . Seite 1-14 ISBN 3-86068-213-X International Conference on Computing in Civil and Building Engineering <10, 2004, Weimar> Summary In our project, we develop new tools for the conceptual design phase. During conceptual design, the coarse functionality and organization of a building is more important than a detailed worked out construction. We identify two roles, first the knowledge engineer who is responsible for knowledge definition and maintenance; second the architect who elaborates the conceptual de-sign. The tool for the knowledge engineer is based on graph technology, it is specified using PROGRES and the UPGRADE framework. The tools for the architect are integrated to the in-dustrial CAD tool ArchiCAD. Consistency between knowledge and conceptual design is en-sured by the constraint checker, another extension to ArchiCAD.}, subject = {CAD}, language = {en} } @inproceedings{MuellerAbdelrazeqBraunerCaleroValdezetal.2018, author = {M{\"u}ller-Abdelrazeq, Sarah Luisa and Brauner, Philipp and Calero Valdez, Andr{\´e} and Jansen, Ulrich and Platte, Laura and Schaar, Anne-Kathrin and Steuer-Dankert, Linda and Zachow, Sebastian and Sch{\"o}nefeld, Kathrin and Haberstroh, Max and Leicht-Scholten, Carmen and Ziefle, Martina}, title = {Interdisciplinary cooperation management in research clusters: a review of twelve years.}, series = {Proceedings of the 15th International Conference on Intellectual Capital, Knowledge Management \& Organisational Learning}, booktitle = {Proceedings of the 15th International Conference on Intellectual Capital, Knowledge Management \& Organisational Learning}, editor = {Pather, Shaun}, publisher = {ACPIL}, isbn = {978-1-912764-09-9}, pages = {216 -- 224}, year = {2018}, abstract = {As an interdisciplinary research network, the Cluster of Excellence "Integrative Production Technology for High-Wage Countries" (CoE) comprises of around 150 researchers. Their scientific background ranges from mechanical engineering and computer science to social sciences such as sociology and psychology. In addition to content- and methodbased challenges, the CoE's employees are faced with heterogenic organizational cultures, different hierarchical levels, an imbalanced gender distribution, and a high employee fluctuation. The sub-project Scientific Cooperation Engineering 1 (CSP1) addresses the challenge of interdisciplinary cooperation and organizational learning and aims at fostering interdisciplinarity and its synergies as a source of innovation. Therefore, the project examines means of reaching an organizational development, ranging from temporal structures to a sustainable network in production technology. To achieve this aim, a broad range of means has been developed during the last twelve years: In addition to physical measures such as regular network events and trainings, virtual measures such as the Terminology App were focused. The app is an algorithmic analysis method for uncovering latent topic structures of publications of the CoE to highlight thematic intersections and synergy potentials. The detection and promotion of has been a vital and long known element in knowledge management. Furthermore, CSP1 focusses on project management and thus developed evaluation tools to measure and control the success of interdisciplinary cooperation. In addition to the cooperation fostering measures, CSP1 conducted studies about interdisciplinarity and diversity and their relationship with innovation. The scientific background of these means and the research results of CSP1 are outlined in this paper to offer approaches for successful interdisciplinary cooperation management.}, language = {en} } @inproceedings{SchulzeBuxlohGross2021, author = {Schulze-Buxloh, Lina and Groß, Rolf Fritz}, title = {Interdisciplinary Course Smart Building Engineering: A new approach of teaching freshmen in remote teamwork project under pandemic restrictions}, series = {New Perspectives in Science Education -International Conference (virtual event, 18-19 March 2021)}, booktitle = {New Perspectives in Science Education -International Conference (virtual event, 18-19 March 2021)}, publisher = {Filodiritto}, address = {Bologna}, pages = {4 Seiten}, year = {2021}, abstract = {In the context of the Corona pandemic and its impact on teaching like digital lectures and exercises a new concept especially for freshmen in demanding courses of Smart Building Engineering became necessary. As there were hardly any face-to-face events at the university, the new teaching concept should enable a good start into engineering studies under pandemic conditions anyway and should also replace the written exam at the end. The students should become active themselves in small teams instead of listening passively to a lecture broadcast online with almost no personal contact. For this purpose, a role play was developed in which the freshmen had to work out a complete solution to the realistic problem of designing, construction planning and implementing a small guesthouse. Each student of the team had to take a certain role like architect, site manager, BIM-manager, electrician and the technitian for HVAC installations. Technical specifications must be complied with, as well as documentation, time planning and cost estimate. The final project folder had to contain technical documents like circuit diagrams for electrical components, circuit diagrams for water and heating, design calculations and components lists. On the other hand construction schedule, construction implementation plan, documentation of the construction progress and minutes of meetings between the various trades had to be submitted as well. In addition to the project folder, a model of the construction project must also be created either as a handmade model or as a digital 3D-model using Computer-aided design (CAD) software. The first steps in the field of Building information modelling (BIM) had also been taken by creating a digital model of the building showing the current planning status in real time as a digital twin. This project turned out to be an excellent training of important student competencies like teamwork, communication skills, and self -organisation and also increased motivation to work on complex technical questions. The aim of giving the student a first impression on the challenges and solutions in building projects with many different technical trades and their points of view was very well achieved and should be continued in the future.}, language = {en} } @inproceedings{ValeroBung2016, author = {Valero, Daniel and Bung, Daniel B.}, title = {Interfacial velocity estimation in highly aerated stepped spillway flows with a single tip fibre optical probe and Artificial Neural Networks}, series = {6th IAHR International Junior Researcher and Engineer Workshop on Hydraulic Structures, May 30th to June 1st 2016. L{\"u}beck, Germany}, booktitle = {6th IAHR International Junior Researcher and Engineer Workshop on Hydraulic Structures, May 30th to June 1st 2016. L{\"u}beck, Germany}, doi = {10.15142/T3Q590}, pages = {13 Seiten}, year = {2016}, abstract = {Air-water flows can be found in different engineering applications: from nuclear engineering to huge hydraulic structures. In this paper, a single tip fibre optical probe has been used to record high frequency (over 1 MHz) phase functions at different locations of a stepped spillway. These phase functions have been related to the interfacial velocities by means of Artificial Neural Networks (ANN) and the measurements of a classical double tip conductivity probe. Special attention has been put to the input selection and the ANN dimensions. Finally, ANN have shown to be able to link the signal rising times and plateau shapes to the air-water interfacial velocity.}, language = {en} } @inproceedings{SchnellBrandesGligorevicetal.2008, author = {Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana and Walter, M. and Rihacek, Christoph and Sajatovic, Miodrag and Haindl, Bernhard}, title = {Interference mitigation for broadband L-DACS}, series = {27th IEEE/AIAA Digital Avionics Systems Conference : DASC 2008 : 26-30 Oct. 2008, St. Paul, Minn.}, booktitle = {27th IEEE/AIAA Digital Avionics Systems Conference : DASC 2008 : 26-30 Oct. 2008, St. Paul, Minn.}, organization = {Institute of Electrical and Electronics Engineers}, isbn = {978-1-4244-2207-4 ; 978-1-4244-2208-1}, pages = {2B2-1 -- 2B2-12}, year = {2008}, language = {en} } @inproceedings{NiemuellerNeumannHenkeetal.2017, author = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard}, title = {International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League}, series = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016}, booktitle = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-68792-6}, doi = {10.1007/978-3-319-68792-6_53}, pages = {634 -- 642}, year = {2017}, language = {en} } @inproceedings{SchuermannKellerWollert2009, author = {Sch{\"u}rmann, Volker and Keller, Alex and Wollert, J{\"o}rg}, title = {Internet based middleware approach for building services}, series = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1}, booktitle = {Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1}, publisher = {IIIS}, address = {Winter Garden, Fla.}, organization = {International Multi-Conference on Engineering and Technological Innovation <2, 2009, Orlando, Fla.>}, isbn = {1-934272-68-X ; 978-1-934272-68-8}, pages = {30 -- 34}, year = {2009}, language = {en} } @inproceedings{ThomasWollert2000, author = {Thomas, F. and Wollert, J{\"o}rg}, title = {Internet und OO-Systeme in der Logistik}, series = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)}, booktitle = {Risikofaktor Software : Tagung Mannheim, 21. und 22.November 2000. (VDI-Berichte ; 1577)}, publisher = {VDI-Verl.}, address = {H{\"u}thig}, organization = {Gesellschaft F{\"o}rdertechnik, Materialfluss und Logistik}, isbn = {3180915773}, pages = {149 -- 164}, year = {2000}, language = {de} } @inproceedings{Wollert2000, author = {Wollert, J{\"o}rg}, title = {Internettechnologie und Multimedia f{\"u}r Steuerungssysteme}, series = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)}, booktitle = {Tagungsband - SPS/IPC/Drives 2000 : elektrische Automatisierung - Systeme und Komponenten ; 11. Fachmesse \& Kongress 28. - 30. Nov. 2000, N{\"u}rnberg. (Praxiswissen : Automatisierung)}, publisher = {H{\"u}thig}, address = {Heidelberg}, organization = {SPS IPC Drives <11, 2000, N{\"u}rnberg>}, isbn = {3-7785-2836-X}, pages = {78 -- 86}, year = {2000}, language = {de} } @inproceedings{SpurmannOhndorfDachwaldetal.2009, author = {Spurmann, J{\"o}rn and Ohndorf, Andreas and Dachwald, Bernd and Seboldt, Wolfgang and L{\"o}b, Horst and Schartner, Karl-Heinz}, title = {Interplanetary trajectory optimization for a sep mission to Saturn}, series = {60th International Astronautical Congress 2009}, booktitle = {60th International Astronautical Congress 2009}, isbn = {9781615679089}, pages = {5234 -- 5248}, year = {2009}, abstract = {The recently proposed NASA and ESA missions to Saturn and Jupiter pose difficult tasks to mission designers because chemical propulsion scenarios are not capable of transferring heavy spacecraft into the outer solar system without the use of gravity assists. Thus our developed mission scenario based on the joint NASA/ESA Titan Saturn System Mission baselines solar electric propulsion to improve mission flexibility and transfer time. For the calculation of near-globally optimal low-thrust trajectories, we have used a method called Evolutionary Neurocontrol, which is implemented in the low-thrust trajectory optimization software InTrance. The studied solar electric propulsion scenario covers trajectory optimization of the interplanetary transfer including variations of the spacecraft's thrust level, the thrust unit's specific impulse and the solar power generator power level. Additionally developed software extensions enabled trajectory optimization with launcher-provided hyperbolic excess energy, a complex solar power generator model and a variable specific impulse ion engine model. For the investigated mission scenario, Evolutionary Neurocontrol yields good optimization results, which also hold valid for the more elaborate spacecraft models. Compared to Cassini/Huygens, the best found solutions have faster transfer times and a higher mission flexibility in general.}, language = {en} } @inproceedings{BragardSubeSchneideretal.2019, author = {Bragard, Michael and Sube, Maike and Schneider, Maike and Jungemann, Christoph}, title = {Introducing a Cross-University Bachelor's Programme with Orientation Semester - Enabling a Permeable Academic Education System}, series = {2019 20th International Conference on Research and Education in Mechatronics (REM)}, booktitle = {2019 20th International Conference on Research and Education in Mechatronics (REM)}, isbn = {978-1-5386-9257-8}, doi = {10.1109/REM.2019.8744132}, pages = {1 -- 6}, year = {2019}, language = {en} }