@inproceedings{SchwagerAngeleSchwarzboezletal.2023,
  author    = {Schwager, Christian and Angele, Florian and Schwarzb{\"o}zl, Peter and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Model predictive assistance for operational decision making in molten salt receiver systems},
  series = {SolarPACES: Solar Power \& Chemical Energy Systems},
  booktitle = {SolarPACES: Solar Power \& Chemical Energy Systems},
  number    = {2815 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4623-6},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0151514},
  pages     = {8 Seiten},
  year      = {2023},
  abstract  = {Despite the challenges of pioneering molten salt towers (MST), it remains the leading technology in central receiver power plants today, thanks to cost effective storage integration and high cost reduction potential. The limited controllability in volatile solar conditions can cause significant losses, which are difficult to estimate without comprehensive modeling [1]. This paper presents a Methodology to generate predictions of the dynamic behavior of the receiver system as part of an operating assistance system (OAS). Based on this, it delivers proposals if and when to drain and refill the receiver during a cloudy period in order maximize the net yield and quantifies the amount of net electricity gained by this. After prior analysis with a detailed dynamic two-phase model of the entire receiver system, two different reduced modeling approaches where developed and implemented in the OAS. A tailored decision algorithm utilizes both models to deliver the desired predictions efficiently and with appropriate accuracy.},
  language  = {en}
}
@inproceedings{NikolovskiLimpertNessauetal.2023,
  author    = {Nikolovski, Gjorgji and Limpert, Nicolas and Nessau, Hendrik and Reke, Michael and Ferrein, Alexander},
  title     = {Model-predictive control with parallelised optimisation for the navigation of autonomous mining vehicles},
  series = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  booktitle = {2023 IEEE Intelligent Vehicles Symposium (IV)},
  publisher = {IEEE},
  isbn      = {979-8-3503-4691-6 (Online)},
  doi       = {10.1109/IV55152.2023.10186806},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {The work in modern open-pit and underground mines requires the transportation of large amounts of resources between fixed points. The navigation to these fixed points is a repetitive task that can be automated. The challenge in automating the navigation of vehicles commonly used in mines is the systemic properties of such vehicles. Many mining vehicles, such as the one we have used in the research for this paper, use steering systems with an articulated joint bending the vehicle's drive axis to change its course and a hydraulic drive system to actuate axial drive components or the movements of tippers if available. To address the difficulties of controlling such a vehicle, we present a model-predictive approach for controlling the vehicle. While the control optimisation based on a parallel error minimisation of the predicted state has already been established in the past, we provide insight into the design and implementation of an MPC for an articulated mining vehicle and show the results of real-world experiments in an open-pit mine environment.},
  language  = {en}
}
@inproceedings{DuongNguyenStaat2015,
  author    = {Duong, Minh Tuan and Nguyen, N. H. and Staat, Manfred},
  title     = {Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)},
  series = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  booktitle = {Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon},
  publisher = {RWTH Aachen University},
  address   = {Aachen},
  organization    = {ECCOMAS Young Investigators Conference <3, 2015, Aachen>},
  pages     = {1 -- 4},
  year      = {2015},
  language  = {en}
}
@inproceedings{RendonSchwagerGhiasietal.2020,
  author    = {Rendon, Carlos and Schwager, Christian and Ghiasi, Mona and Schmitz, Pascal and Bohang, Fakhri and Caminos, Ricardo Alexander Chico and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming},
  series = {AIP Conference Proceedings},
  booktitle = {AIP Conference Proceedings},
  number    = {2303},
  doi       = {10.1063/5.0029974},
  pages     = {170012-1 -- 170012-9},
  year      = {2020},
  language  = {en}
}
@inproceedings{StenderRitz2003,
  author    = {Stender, Michael and Ritz, Thomas},
  title     = {Modeling of business-to-business mobile commerce processes},
  series = {Electronic proceedings / ICPR 17, 17th International Conference on Production Research [Blacksburg, Virginia, USA, August 3 - 7, 2003]},
  booktitle = {Electronic proceedings / ICPR 17, 17th International Conference on Production Research [Blacksburg, Virginia, USA, August 3 - 7, 2003]},
  edition   = {CD-ROM-Ausg.},
  address   = {Blacksburg, Va.},
  isbn      = {0-9721257-3-6},
  year      = {2003},
  language  = {en}
}
@inproceedings{ZahraPhaniSrujanCaminosetal.2022,
  author    = {Zahra, Mahdi and Phani Srujan, Merige and Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Herrmann, Ulf and Teixeira Boura, Cristiano Jos{\´e} and Schmitz, Mark and Gielen, Hans and Gedle, Yibekal and Dersch, J{\"u}rgen},
  title     = {Modeling the thermal behavior of solar salt in electrical resistance heaters for the application in PV-CSP hybrid power plants},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086268},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {Concentrated Solar Power (CSP) systems are able to store energy cost-effectively in their integrated thermal energy storage (TES). By intelligently combining Photovoltaics (PV) systems with CSP, a further cost reduction of solar power plants is expected, as well as an increase in dispatchability and flexibility of power generation. PV-powered Resistance Heaters (RH) can be deployed to raise the temperature of the molten salt hot storage from 385 °C up to 565 °C in a Parabolic Trough Collector (PTC) plant. To avoid freezing and decomposition of molten salt, the temperature distribution in the electrical resistance heater is investigated in the present study. For this purpose, a RH has been modeled and CFD simulations have been performed. The simulation results show that the hottest regions occur on the electric rod surface behind the last baffle. A technical optimization was performed by adjusting three parameters: Shell-baffle clearance, electric rod-baffle clearance and number of baffles. After the technical optimization was carried out, the temperature difference between the maximum temperature and the average outlet temperature of the salt is within the acceptable limits, thus critical salt decomposition has been avoided. Additionally, the CFD simulations results were analyzed and compared with results obtained with a one-dimensional model in Modelica.},
  language  = {en}
}
@inproceedings{TheisKrisnamurthySchmitz2015,
  author    = {Theis, Jochen and Krisnamurthy, Hemanth Kumar and Schmitz, G{\"u}nter},
  title     = {Modellbasierte Simulation und experimentelle Anwendung von mechatronischen Systemen in der Lehre in Verbindung mit NI myRIO und dem NI LabVIEW Interface Toolkit},
  series = {Virtuelle Instrumente in der Praxis 2015 : Mess-, Steuer-, Regel- und Embedded-Systeme; Begleitband zum 20. VIP-Kongress},
  booktitle = {Virtuelle Instrumente in der Praxis 2015 : Mess-, Steuer-, Regel- und Embedded-Systeme; Begleitband zum 20. VIP-Kongress},
  editor    = {Jamal, Rahman},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  isbn      = {978-3-8007-3669-0},
  pages     = {362 -- 365},
  year      = {2015},
  language  = {de}
}
@inproceedings{MoshiriKahakPfaffGaebeletal.2017,
  author    = {Moshiri-Kahak, Amir and Pfaff, Raphael and G{\"a}bel, Markus and Reich, Alexander},
  title     = {Modellierung der Adh{\"a}sionsfl{\"a}che im Rad-Schiene-Kontakt unter Einsatz von reibwertverbessernden Mitteln},
  series = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  booktitle = {15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, M{\"a}rz 2017},
  pages     = {3 Seiten},
  year      = {2017},
  language  = {de}
}
@inproceedings{RosinKubalskiButenweg2013,
  author    = {Rosin, Julia and Kubalski, Thomas and Butenweg, Christoph},
  title     = {Modellierung eines basisisolierten, zylindrischen Fl{\"u}ssigkeitstanks aus Stahl},
  series = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  booktitle = {13. D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, {\"O}sterreich},
  organization    = {D-A-CH Tagung f{\"u}r Erdbebeningenieurwesen und Baudynamik <13, 2013, Wien>},
  pages     = {1 -- 10},
  year      = {2013},
  language  = {de}
}
@inproceedings{Wollert1994,
  author    = {Wollert, J{\"o}rg},
  title     = {Modellierung intelligenter Regelungen mit analytischen und heuristischen Merkmalen},
  series = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994},
  booktitle = {39. Internationales Wissenschaftliches Kolloquium / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen : 27.-30.09.1994},
  publisher = {Techn. Univ.},
  address   = {Ilmenau},
  organization    = {Technische Universit{\"a}t <Ilmenau>},
  issn      = {0943-7207},
  pages     = {181 -- 188},
  year      = {1994},
  language  = {de}
}
@inproceedings{RitzStender2003,
  author    = {Ritz, Thomas and Stender, Michael},
  title     = {Modellierung von Business-to-Business Gesch{\"a}ftsprozessen im Mobile Commerce},
  series = {Mobile Commerce - Anwendung und Perspektiven : [proceedings zum] 3. Workshop Mobile Commerce, Universit{\"a}t Augsburg, 04.02.2003. - (GI-Edition : Proceedings ; 25)},
  booktitle = {Mobile Commerce - Anwendung und Perspektiven : [proceedings zum] 3. Workshop Mobile Commerce, Universit{\"a}t Augsburg, 04.02.2003. - (GI-Edition : Proceedings ; 25)},
  editor    = {Pousttchi, Key},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {3-88579-354-7},
  pages     = {27 -- 41},
  year      = {2003},
  language  = {de}
}
@inproceedings{KirschKolymbasFellin2007,
  author    = {Kirsch, Ansgar and Kolymbas, Dimitrios and Fellin, Wolfgang},
  title     = {Modellierung von druckhaftem anisotropem Fels},
  series = {6. {\"O}sterreichische Geotechniktagung : mit "Vienna - Terzaghi Lecture" ; Tagungsbeitr{\"a}ge 18. und 19. J{\"a}nner 2007 / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  booktitle = {6. {\"O}sterreichische Geotechniktagung : mit "Vienna - Terzaghi Lecture" ; Tagungsbeitr{\"a}ge 18. und 19. J{\"a}nner 2007 / {\"O}sterreichischer Ingenieur- und Architekten-Verein},
  address   = {Wien},
  organization    = {{\"O}sterreichische Geotechniktagung <6, 2007, Wien>},
  isbn      = {978-3-902450-58-6},
  pages     = {487 -- 498},
  year      = {2007},
  language  = {de}
}
@inproceedings{KapoorBraunBoller2010,
  author    = {Kapoor, Hrshi and Braun, Carsten and Boller, Christian},
  title     = {Modelling and optimisation of maintenance intervals to realize structural health monitoring applications on aircraft},
  series = {Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]},
  booktitle = {Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]},
  editor    = {Casciati, Fabio},
  publisher = {DEStech Publ.},
  address   = {Lancaster, Pa.},
  isbn      = {978-1-60595-024-2},
  pages     = {55 -- 63},
  year      = {2010},
  language  = {en}
}
@inproceedings{AlexopoulosRauHoffschmidtetal.2012,
  author    = {Alexopoulos, Spiros and Rau, Christoph and Hoffschmidt, Bernhard and Breitbach, Gerd and Latzke, Markus},
  title     = {Modelling and validation of a transient heat recovery steam generator of the solar tower power plant Juelich},
  series = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  booktitle = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  address   = {Rijeka},
  pages     = {ID 97},
  year      = {2012},
  language  = {en}
}
@inproceedings{KirschBlioumiFellinetal.2007,
  author    = {Kirsch, Ansgar and Blioumi, A. and Fellin, Wolfgang and Kolymbas, Dimitrios},
  title     = {Modelling anisotropic squeezing as a process in time},
  series = {ECCOMAS Thematic Conference on Computational Methods in Tunneling ; August 27 - 29, 2007, Vienna, Austria : EURO:TUN 2007 : proceedings},
  booktitle = {ECCOMAS Thematic Conference on Computational Methods in Tunneling ; August 27 - 29, 2007, Vienna, Austria : EURO:TUN 2007 : proceedings},
  address   = {Wien},
  organization    = {Thematic Conference on Computational Methods in Tunneling <2007, Wien>},
  isbn      = {3-9501554-7-3 ; 978-3-9501554-7-1},
  pages     = {1 CD-ROM},
  year      = {2007},
  language  = {en}
}
@inproceedings{MertensBraunerBaieretal.2022,
  author    = {Mertens, Alexander and Brauner, Philipp and Baier, Ralph and Brillowski, Florian and Dammers, Hannah and van Dyck, Marc and Kong, Iris and K{\"o}nigs, Peter and Kordtomeikel, Frauke and Liehner, Gian Luca and P{\"u}tz, Sebastian and Rodermann, Niklas and Schaar, Anne Kathrin and Steuer-Dankert, Linda and Vervier, Luisa and Wlecke, Shari and Gries, Thomas and Leicht-Scholten, Carmen and Nagel, Saskia K. and Piller, Frank T. and Schuh, G{\"u}nther and Ziefle, Martina and Nitsch, Verena},
  title     = {Modelling Human Factors in Cyber Physical Production Systems by the Integration of Human Digital Shadows},
  series = {Modellierung 2022 Satellite Events},
  booktitle = {Modellierung 2022 Satellite Events},
  editor    = {Michael, Judith and Pfeiffer, J{\´e}r{\^o}me and Wortmann, Andreas},
  publisher = {GI Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  doi       = {10.18420/modellierung2022ws-018},
  pages     = {147 -- 149},
  year      = {2022},
  abstract  = {The future of industrial manufacturing and production will increasingly manifest in the form of cyber-physical production systems. Here, Digital Shadows will act as mediators between the physical and digital world to model and operationalize the interactions and relationships between different entities in production systems. Until now, the associated concepts have been primarily pursued and implemented from a technocentric perspective, in which human actors play a subordinate role, if they are considered at all. This paper outlines an anthropocentric approach that explicitly considers the characteristics, behavior, and traits and states of human actors in socio-technical production systems. For this purpose, we discuss the potentials and the expected challenges and threats of creating and using Human Digital Shadows in production.},
  language  = {en}
}
@inproceedings{KalkerNeumannButenwegetal.2005,
  author    = {Kalker, Ines and Neumann, M. and Butenweg, Christoph and Holler, Stefan},
  title     = {Modelling of textile strengthened masonry},
  series = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  booktitle = {Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping},
  publisher = {Civil-Comp Press},
  address   = {Stirling},
  organization    = {International Conference on Civil, Structural and Environmental Engineering Computing <10, 2005, Rome>},
  isbn      = {1-905088-00-0},
  doi       = {10.4203/ccp.81.184},
  pages     = {447 -- 448},
  year      = {2005},
  language  = {en}
}
@inproceedings{PfaffMoshiriReichetal.2017,
  author    = {Pfaff, Raphael and Moshiri, Amir and Reich, Alexander and G{\"a}bel, Markus},
  title     = {Modelling of the effect of sanding on the wheel-rail adhesion area},
  series = {First International Conference on Rail Transportation},
  booktitle = {First International Conference on Rail Transportation},
  pages     = {1 -- 7},
  year      = {2017},
  language  = {en}
}
@inproceedings{vonHeesenFaber1992,
  author    = {von Heesen, W. and Faber, Christian},
  title     = {Modenfilter als Schalld{\"a}mpfer f{\"u}r axiale Turbomaschinen : M{\"o}glichkeiten und Grenzen des Einsatzes},
  series = {Schalltechnik '92 : L{\"a}rmminderung durch Schalld{\"a}mpfer ; Tagung B{\"o}blingen, 19. und 20. Mai 1992 / Normenausschuß Akustik, L{\"a}rmminderung und Schwingungstechnik (NALS) im DIN und VDI. VDI-Berichte. 938},
  booktitle = {Schalltechnik '92 : L{\"a}rmminderung durch Schalld{\"a}mpfer ; Tagung B{\"o}blingen, 19. und 20. Mai 1992 / Normenausschuß Akustik, L{\"a}rmminderung und Schwingungstechnik (NALS) im DIN und VDI. VDI-Berichte. 938},
  publisher = {VDI-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-090938-2},
  pages     = {241 -- 260},
  year      = {1992},
  language  = {de}
}
@inproceedings{RamanJungHorvathetal.2019,
  author    = {Raman, Aravind Hariharan and Jung, Alexander and Horv{\´a}th, Andr{\´a}s and Becker, Nadine and Staat, Manfred},
  title     = {Modification of a computer model of human stem cell-derived cardiomyocyte electrophysiology based on Patch-Clamp measurements},
  series = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  booktitle = {3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen},
  editor    = {Staat, Manfred and Erni, Daniel},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-940402-22-6},
  doi       = {10.17185/duepublico/48750},
  pages     = {10 -- 11},
  year      = {2019},
  abstract  = {Human induced pluripotent stem cells (hiPSCs) have shown to be promising in disease studies and drug screenings [1]. Cardiomyocytes derived from hiPSCs have been extensively investigated using patch-clamping and optical methods to compare their electromechanical behaviour relative to fully matured adult cells. Mathematical models can be used for translating findings on hiPSCCMs to adult cells [2] or to better understand the mechanisms of various ion channels when a drug is applied [3,4]. Paci et al. (2013) [3] developed the first model of hiPSC-CMs, which they later refined based on new data [3]. The model is based on iCells® (Fujifilm Cellular Dynamics, Inc. (FCDI), Madison WI, USA) but major differences among several cell lines and even within a single cell line have been found and motivate an approach for creating sample-specific models. We have developed an optimisation algorithm that parameterises the conductances (in S/F=Siemens/Farad) of the latest Paci et al. model (2018) [5] using current-voltage data obtained in individual patch-clamp experiments derived from an automated patch clamp system (Patchliner, Nanion Technologies GmbH, Munich).},
  language  = {en}
}
@inproceedings{ChaiybounTrauteKiesewetteretal.2006,
  author    = {Chaiyboun, Ali and Traute, R{\"u}diger and Kiesewetter, Olaf and Ahlers, Simon and M{\"u}ller, Gerhard and Doll, Theodor},
  title     = {Modular analytical multicomponent analysis in gas sensor arrays},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1358},
  year      = {2006},
  abstract  = {A multi-sensor system is a chemical sensor system which quantitatively and qualitatively records gases with a combination of cross-sensitive gas sensor arrays and pattern recognition software. This paper addresses the issue of data analysis for identification of gases in a gas sensor array. We introduce a software tool for gas sensor array configuration and simulation. It concerns thereby about a modular software package for the acquisition of data of different sensors. A signal evaluation algorithm referred to as matrix method was used specifically for the software tool. This matrix method computes the gas concentrations from the signals of a sensor array. The software tool was used for the simulation of an array of five sensors to determine gas concentration of CH4, NH3, H2, CO and C2H5OH. The results of the present simulated sensor array indicate that the software tool is capable of the following: (a) identify a gas independently of its concentration; (b) estimate the concentration of the gas, even if the system was not previously exposed to this concentration; (c) tell when a gas concentration exceeds a certain value. A gas sensor data base was build for the configuration of the software. With the data base one can create, generate and manage scenarios and source files for the simulation. With the gas sensor data base and the simulation software an on-line Web-based version was developed, with which the user can configure and simulate sensor arrays on-line.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{SchwarzerVieiraMuelleretal.2003,
  author    = {Schwarzer, Klemens and Vieira, Maria Eugenia and M{\"u}ller, Christoph and Lehmann, Harry and Coutinho, Lecimara},
  title     = {Modular solar thermal desalination system with flat plate collector},
  series = {RIO 3 - World Climate \& Energy Event : proceedings of the international conference held in Rio de Janeiro, Brazil, 1 -5 december 2003 / chief-ed.: Stefan Krauter ...},
  booktitle = {RIO 3 - World Climate \& Energy Event : proceedings of the international conference held in Rio de Janeiro, Brazil, 1 -5 december 2003 / chief-ed.: Stefan Krauter ...},
  publisher = {Krauter},
  address   = {Rio de Janeiro},
  isbn      = {85-902710-2-1},
  pages     = {281 -- 286},
  year      = {2003},
  language  = {en}
}
@inproceedings{Roeth2002,
  author    = {R{\"o}th, Thilo},
  title     = {Modularisierung in der Karosserie von morgen},
  year      = {2002},
  abstract  = {1) Module werden die Fahrzeugplattform und den -aufbau in Zukunft weiterhin und in zunehmendem Maße bestimmen. 2) Neue Module und Modulschnittstellen am Fahrzeug werden {\"u}berdacht und k{\"o}nnen in der Zukunft erwartet werden. 3) Die Wertsch{\"o}pfung und der Entwicklungsumfang wird sich vom OEM zum Modullieferanten verlagern. 4) Modulvergaben werden in der Zukunft noch st{\"a}rker auf Innovation und Kostenreduktion beruhen. 5) Modularisierung des Fahrzeuges heißt ein Aufbrechen der Fahrzeugkarosserie und wird daher von der Beherrschung struktureller Aufgaben sowie der L{\"o}sung der (sichtbaren) Modul{\"u}berg{\"a}nge bestimmt sein. 6) Neben den Systemintegratoren und den Komponentenspezialisten besetzen die Modullieferanten die erste Lieferantenriege. 7) Der Modullieferant wird neben h{\"o}chster Fertigungsexpertise ein hohes Maß an (Teil-)fahrzeug-Know-How und Produktentwickler-mentalit{\"a}t bereitstellen.},
  subject      = {Karosseriebau},
  language  = {de}
}
@inproceedings{KueppersGroebelKuperjansetal.2011,
  author    = {K{\"u}ppers, Christine and Groebel, Simone and Kuperjans, Isabel and Dielmann, Klaus-Peter},
  title     = {Molekulargenetische Analysen zur Optimierung der Biogasgewinnung},
  series = {Biogas 2011 : 4. Innovationskongress ; Effizienzsteigerung von Biogasanlagen ; Vorstellung der 17 besten Biogas-Innovationen der letzten 12 Monate ; 12. - 13. Mai 2011, im ZUK der Deutschen Bundesstiftung Umwelt ; Tagungsband},
  booktitle = {Biogas 2011 : 4. Innovationskongress ; Effizienzsteigerung von Biogasanlagen ; Vorstellung der 17 besten Biogas-Innovationen der letzten 12 Monate ; 12. - 13. Mai 2011, im ZUK der Deutschen Bundesstiftung Umwelt ; Tagungsband},
  publisher = {Profair Consult+Project},
  address   = {Hildesheim},
  isbn      = {978-3-9813776-1-3},
  pages     = {45 -- 48},
  year      = {2011},
  language  = {de}
}
@inproceedings{GrundmannBorellaCeriottietal.2021,
  author    = {Grundmann, Jan Thimo and Borella, Laura and Ceriotti, Matteo and Chand, Suditi and Cordero, Federico and Dachwald, Bernd and Fexer, Sebastian and Grimm, Christian D. and Hendrikse, Jeffrey and Herč{\´i}k, David and Herique, Alain and Hillebrandt, Martin and Ho, Tra-Mi and Kesseler, Lars and Laabs, Martin and Lange, Caroline and Lange, Michael and Lichtenheldt, Roy and McInnes, Colin R. and Moore, Iain and Peloni, Alessandro and Plettenmeier, Dirk and Quantius, Dominik and Seefeldt, Patric and Venditti, Flaviane c. F. and Vergaaij, Merel and Viavattene, Giulia and Virkki, Anne K. and Zander, Martin},
  title     = {More bucks for the bang: new space solutions, impact tourism and one unique science \& engineering opportunity at T-6 months and counting},
  series = {7th IAA Planetary Defense Conference},
  booktitle = {7th IAA Planetary Defense Conference},
  year      = {2021},
  abstract  = {For now, the Planetary Defense Conference Exercise 2021's incoming fictitious(!), asteroid, 2021 PDC, seems headed for impact on October 20th, 2021, exactly 6 months after its discovery. Today (April 26th, 2021), the impact probability is 5\%, in a steep rise from 1 in 2500 upon discovery six days ago. We all know how these things end. Or do we? Unless somebody kicked off another headline-grabbing media scare or wants to keep civil defense very idle very soon, chances are that it will hit (note: this is an exercise!). Taking stock, it is barely 6 months to impact, a steadily rising likelihood that it will actually happen, and a huge uncertainty of possible impact energies: First estimates range from 1.2 MtTNT to 13 GtTNT, and this is not even the worst-worst case: a 700 m diameter massive NiFe asteroid (covered by a thin veneer of Ryugu-black rubble to match size and brightness), would come in at 70 GtTNT. In down to Earth terms, this could be all between smashing fireworks over some remote area of the globe and a 7.5 km crater downtown somewhere. Considering the deliberate and sedate ways of development of interplanetary missions it seems we can only stand and stare until we know well enough where to tell people to pack up all that can be moved at all and save themselves. But then, it could just as well be a smaller bright rock. The best estimate is 120 m diameter from optical observation alone, by 13\% standard albedo. NASA's upcoming DART mission to binary asteroid (65803) Didymos is designed to hit such a small target, its moonlet Dimorphos. The Deep Impact mission's impactor in 2005 successfully guided itself to the brightest spot on comet 9P/Tempel 1, a relatively small feature on the 6 km nucleus. And 'space' has changed: By the end of this decade, one satellite communication network plans to have launched over 11000 satellites at a pace of 60 per launch every other week. This level of series production is comparable in numbers to the most prolific commercial airliners. Launch vehicle production has not simply increased correspondingly - they can be reused, although in a trade for performance. Optical and radio astronomy as well as planetary radar have made great strides in the past decade, and so has the design and production capability for everyday 'high-tech' products. 60 years ago, spaceflight was invented from scratch within two years, and there are recent examples of fast-paced space projects as well as a drive towards 'responsive space'. It seems it is not quite yet time to abandon all hope. We present what could be done and what is too close to call once thinking is shoved out of the box by a clear and present danger, to show where a little more preparedness or routine would come in handy - or become decisive. And if we fail, let's stand and stare safely and well instrumented anywhere on Earth together in the greatest adventure of science.},
  language  = {en}
}
@inproceedings{BindzusBragard2018,
  author    = {Bindzus, Manuel and Bragard, Michael},
  title     = {Motivating Intuitive Understanding of the Switched Reluctance Machine in the Education of Undergraduate Students},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659870},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{Wessling2007,
  author    = {Weßling, Matthias},
  title     = {Motivation and Leadership - The Reiss-Profile of the 16 Basic Desires: Research results and managerial applications},
  year      = {2007},
  abstract  = {Recent Results of the scientific Reiss-Profile (16 basic desires) due to the concept of Prof. Dr. Steven Reiss (State University Ohio, U.S.A.), supplemented by the comparative analysis of empirical motivational profiles of european executives of various companies.},
  subject      = {Motivation},
  language  = {en}
}
@inproceedings{BragardHoekHoegenetal.2018,
  author    = {Bragard, Michael and Hoek, Hauke van and Hoegen, Anne von and Doncker, Rik W. De},
  title     = {Motivation-based Learning: Teaching Fundamentals of Electrical Engineering with an LED Spinning Top},
  series = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  isbn      = {978-1-5386-6903-7},
  doi       = {10.1109/RTUCON.2018.8659810},
  pages     = {1 -- 6},
  year      = {2018},
  language  = {en}
}
@inproceedings{BuxbaumSchwarteRingbecketal.2002,
  author    = {Buxbaum, Bernd and Schwarte, Rudolf and Ringbeck, Thorsten and [u.a.],},
  title     = {MSM-PMD as correlation receiver in a new 3D-ranging system},
  series = {Laser radar ranging and atmospheric lidar techniques III : 17 - 18 September 2001, Toulouse, France. - (SPIE proceedings series ; 4546)},
  booktitle = {Laser radar ranging and atmospheric lidar techniques III : 17 - 18 September 2001, Toulouse, France. - (SPIE proceedings series ; 4546)},
  editor    = {Schreiber, Ulrich},
  publisher = {SPIE},
  address   = {Bellingham, Wash.},
  isbn      = {0-8194-4271-2},
  issn      = {0038-7355},
  pages     = {145 -- 154},
  year      = {2002},
  language  = {en}
}
@inproceedings{KloeserKohlKraftetal.2021,
  author    = {Kl{\"o}ser, Lars and Kohl, Philipp and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {Multi-attribute relation extraction (MARE): simplifying the application of relation extraction},
  series = {Proceedings of the 2nd International Conference on Deep Learning Theory and Applications - DeLTA},
  booktitle = {Proceedings of the 2nd International Conference on Deep Learning Theory and Applications - DeLTA},
  isbn      = {978-989-758-526-5},
  doi       = {10.5220/0010559201480156},
  pages     = {148 -- 156},
  year      = {2021},
  abstract  = {Natural language understanding's relation extraction makes innovative and encouraging novel business concepts possible and facilitates new digitilized decision-making processes. Current approaches allow the extraction of relations with a fixed number of entities as attributes. Extracting relations with an arbitrary amount of attributes requires complex systems and costly relation-trigger annotations to assist these systems. We introduce multi-attribute relation extraction (MARE) as an assumption-less problem formulation with two approaches, facilitating an explicit mapping from business use cases to the data annotations. Avoiding elaborated annotation constraints simplifies the application of relation extraction approaches. The evaluation compares our models to current state-of-the-art event extraction and binary relation extraction methods. Our approaches show improvement compared to these on the extraction of general multi-attribute relations.},
  language  = {en}
}
@inproceedings{MuellerAltherrAholaetal.2019,
  author    = {M{\"u}ller, Tim M. and Altherr, Lena and Ahola, Marja and Schabel, Samuel and Pelz, Peter F.},
  title     = {Multi-Criteria optimization of pressure screen systems in paper recycling - balancing quality, yield, energy consumption and system complexity},
  series = {EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization},
  booktitle = {EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization},
  editor    = {Rodrigues, H. C.},
  publisher = {Springer International Publishing},
  address   = {Basel},
  isbn      = {978-3-319-97773-7},
  doi       = {10.1007/978-3-319-97773-7_105},
  year      = {2019},
  abstract  = {The paper industry is the industry with the third highest energy consumption in the European Union. Using recycled paper instead of fresh fibers for papermaking is less energy consuming and saves resources. However, adhesive contaminants in recycled paper are particularly problematic since they reduce the quality of the resulting paper-product. To remove as many contaminants and at the same time obtain as many valuable fibres as possible, fine screening systems, consisting of multiple interconnected pressure screens, are used. Choosing the best configuration is a non-trivial task: The screens can be interconnected in several ways, and suitable screen designs as well as operational parameters have to be selected. Additionally, one has to face conflicting objectives. In this paper, we present an approach for the multi-criteria optimization of pressure screen systems based on Mixed-Integer Nonlinear Programming. We specifically focus on a clear representation of the trade-off between different objectives.},
  language  = {en}
}
@inproceedings{RajanKubalskiAltayetal.2017,
  author    = {Rajan, Sreelakshmy and Kubalski, Thomas and Altay, Okyay and Dalguer, Luis A and Butenweg, Christoph},
  title     = {Multi-dimensional fragility analysis of a RC building with components using response surface method},
  series = {24th International Conference on Structural Mechanics in Reactor Technology, Busan, Korea, 20-25 August, 2017},
  booktitle = {24th International Conference on Structural Mechanics in Reactor Technology, Busan, Korea, 20-25 August, 2017},
  publisher = {International Assn for Structural Mechanics in Reactor Technology (IASMiRT)},
  address   = {Raleigh, USA},
  isbn      = {9781510856776},
  pages     = {3126 -- 3135},
  year      = {2017},
  abstract  = {Conventional fragility curves describe the vulnerability of the main structure under external hazards. However, in complex structures such as nuclear power plants, the safety or the risk depends also on the components associated with a system. The classical fault tree analysis gives an overall view of the failure and contains several subsystems to the main event, however, the interactions in the subsystems are not well represented. In order to represent the interaction of the components, a method suggested by Cimellaro et al. (2006) using multidimensional performance limit state functions to obtain the system fragility curves is adopted. This approach gives the possibility of deriving the cumulative fragility taking into account the interaction of the response of different components. In this paper, this approach is used to evaluate seismic risk of a representative electrical building infrastructure, including the component, of a nuclear power plant. A simplified model of the structure, with nonlinear material behavior is employed for the analysis in Abaqus©. The input variables considered are the material parameters, boundary conditions and the seismic input. The variability of the seismic input is obtained from selected ground motion time histories of spectrum compatible synthetic ccelerograms. Unlike the usual Monte Carlo methods used for the probabilistic analysis of the structure, a computationally effective response surface method is used. This method reduces the computational effort of the calculations by reducing the required number of samples.},
  language  = {en}
}
@inproceedings{BukhariYang2006,
  author    = {Bukhari, Syed Faisal Ahmed and Yang, Wuqiang},
  title     = {Multi-interface level sensors and new development in monitoring and control of oil separators},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1498},
  year      = {2006},
  abstract  = {In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{HuckPoghossianBuniatyanetal.2014,
  author    = {Huck, Christina and Poghossian, Arshak and Buniatyan, V. and Sch{\"o}ning, Michael Josef},
  title     = {Multi-parameter detection for supporting monitoring and control of biogas processes in agriculture},
  series = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  booktitle = {Sensoren und Messsysteme 2014 ; Beitr{\"a}ge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in N{\"u}rnberg. (ITG-Fachbericht ; 250)},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  organization    = {VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik},
  isbn      = {978-3-8007-3622-5},
  pages     = {1 -- 5},
  year      = {2014},
  language  = {en}
}
@inproceedings{NaetherPoghossianPlatenetal.2006,
  author    = {N{\"a}ther, Niko and Poghossian, Arshak and Platen, J. and Yoshinobu, T. and Koudelka-Hep, M. and Sch{\"o}ning, Michael Josef},
  title     = {Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle},
  series = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...},
  booktitle = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...},
  address   = {Warsaw},
  pages     = {172 -- 181},
  year      = {2006},
  language  = {en}
}
@inproceedings{SchmidtsBoltesKraftetal.2017,
  author    = {Schmidts, Oliver and Boltes, Maik and Kraft, Bodo and Schreiber, Marc},
  title     = {Multi-pedestrian tracking by moving Bluetooth-LE beacons and stationary receivers},
  series = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  booktitle = {2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan},
  pages     = {1 -- 4},
  year      = {2017},
  language  = {en}
}
@inproceedings{FeldhusenBrezingPuetzetal.2010,
  author    = {Feldhusen, J{\"o}rg and Brezing, Alexander Nikolaus and P{\"u}tz, Claus and W{\"a}hlisch, Georg},
  title     = {Multi-system CAD-teaching in large classes},
  series = {When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E\&PDE]},
  booktitle = {When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E\&PDE]},
  publisher = {Design Society},
  address   = {Glasgow},
  organization    = {International Conference on Engineering and Product Design Education <12, 2010, Trondheim>},
  isbn      = {978-1-904670-19-3},
  pages     = {204 -- 209},
  year      = {2010},
  language  = {en}
}
@inproceedings{AltherrEdererFarnetaneetal.2017,
  author    = {Altherr, Lena and Ederer, Thorsten and Farnetane, Lucas S. and P{\"o}ttgen, Philipp and Verg{\´e}, Angela and Pelz, Peter F.},
  title     = {Multicriterial design of a hydrostatic transmission system via mixed-integer programming},
  series = {Operations Research Proceedings 2015},
  booktitle = {Operations Research Proceedings 2015},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-42901-4},
  doi       = {10.1007/978-3-319-42902-1_41},
  pages     = {301 -- 307},
  year      = {2017},
  abstract  = {In times of planned obsolescence the demand for sustainability keeps growing. Ideally, a technical system is highly reliable, without failures and down times due to fast wear of single components. At the same time, maintenance should preferably be limited to pre-defined time intervals. Dispersion of load between multiple components can increase a system's reliability and thus its availability inbetween maintenance points. However, this also results in higher investment costs and additional efforts due to higher complexity. Given a specific load profile and resulting wear of components, it is often unclear which system structure is the optimal one. Technical Operations Research (TOR) finds an optimal structure balancing availability and effort. We present our approach by designing a hydrostatic transmission system.},
  language  = {en}
}
@inproceedings{SchoppHeuermannMarso2017,
  author    = {Schopp, Christoph and Heuermann, Holger and Marso, Michel},
  title     = {Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet},
  series = {IEEE Transactions on Plasma Science},
  volume    = {45},
  booktitle = {IEEE Transactions on Plasma Science},
  number    = {6},
  publisher = {IEEE},
  issn      = {1939-9375},
  doi       = {10.1109/TPS.2017.2692735},
  pages     = {932 -- 937},
  year      = {2017},
  language  = {en}
}
@inproceedings{PfaffVinsonneauBurnham2006,
  author    = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.},
  title     = {Multiple models for nonlinear systems},
  series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]},
  organization    = {International Conference on Systems Engineering <18, 2006, Coventry>},
  isbn      = {1-84600-013-0},
  pages     = {347 -- 352},
  year      = {2006},
  language  = {en}
}
@inproceedings{PeloniDachwaldCeriotti2017,
  author    = {Peloni, Alessandro and Dachwald, Bernd and Ceriotti, Matteo},
  title     = {Multiple NEA rendezvous mission: Solar sailing options},
  series = {Fourth International Symposium on Solar Sailing},
  booktitle = {Fourth International Symposium on Solar Sailing},
  pages     = {1 -- 11},
  year      = {2017},
  abstract  = {The scientific interest in near-Earth asteroids (NEAs) and the classification of some of those as potentially hazardous asteroid for the Earth stipulated the interest in NEA exploration. Close-up observations of these objects will increase drastically our knowledge about the overall NEA population. For this reason, a multiple NEA rendezvous mission through solar sailing is investigated, taking advantage of the propellantless nature of this groundbreaking propulsion technology. Considering a spacecraft based on the DLR/ESA Gossamer technology, this work focuses on the search of possible sequences of NEA encounters. The effectiveness of this approach is demonstrated through a number of fully-optimized trajectories. The results show that it is possible to visit five NEAs within 10 years with near-term solar-sail technology. Moreover, a study on a reduced NEA database demonstrates the reliability of the approach used, showing that 58\% of the sequences found with an approximated trajectory model can be converted into real solar-sail trajectories. Lastly, this second study shows the effectiveness of the proposed automatic optimization algorithm, which is able to find solutions for a large number of mission scenarios without any input required from the user.},
  language  = {en}
}
@inproceedings{DammRitzStrauch2011,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Muster und Cloud Computing als Plattformstrategie f{\"u}r mobile Unternehmenssoftware},
  series = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  booktitle = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  editor    = {H{\"o}pfner, Hagen},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-279-6},
  pages     = {91 -- 104},
  year      = {2011},
  language  = {de}
}
@inproceedings{Gross2018,
  author    = {Groß, Rolf Fritz},
  title     = {M{\"o}glichkeiten und Grenzen f{\"u}r Forschung an Fachhochschulen},
  series = {Smart Building Convention und BIMconvention in Aachen im September},
  booktitle = {Smart Building Convention und BIMconvention in Aachen im September},
  pages     = {19 Seiten},
  year      = {2018},
  language  = {de}
}
@inproceedings{Butenweg2007,
  author    = {Butenweg, Christoph},
  title     = {Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung},
  series = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  booktitle = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna},
  organization    = {D-A-CH Tagung <2007, Wien>},
  pages     = {1 -- 14},
  year      = {2007},
  language  = {de}
}
@inproceedings{SchoeningAbdelghani2012,
  author    = {Sch{\"o}ning, Michael Josef and Abdelghani, Adnane},
  title     = {Nanoscale Science and Technology (NS\&T'12) : Proceedings Book Humboldt Kolleg <2012, Tunisia> ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Sch{\"o}ning ; Adnane Abdelghani},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-3544},
  year      = {2012},
  abstract  = {Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in "Nanoscale Science and Technology" (NS\&T'12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS\&T'12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Sch{\"o}ning, Prof. Dr. Adnane Abdelghani},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{O'HerasDigelTemizArtmann2009,
  author    = {O\'Heras, Carlos and Digel, Ilya and Temiz Artmann, Ayseg{\"u}l},
  title     = {Nanostructured carbon-based column for LPS/protein adsorption : [abstract]},
  year      = {2009},
  abstract  = {The absence of a general method for endotoxin removal from liquid interfaces gives an opportunity to find new methods and materials to overcome this gap. Activated nanostructured carbon is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study is to find the adsorption rates for a carboneous material produced at different temperatures, as well as to reveal possible differences between the performance of the material for each of the adsorbates used during the study (hemoglobin, serum albumin and lipopolysaccharide, LPS).},
  subject      = {Kohlenstofffaser},
  language  = {en}
}
@inproceedings{NiedermeierClemensKowalskietal.2014,
  author    = {Niedermeier, H. and Clemens, J. and Kowalski, Julia and Macht, S. and Heinen, D. and Hoffmann, R. and Linder, Peter},
  title     = {Navigation system for a research ice probe for antarctic glaciers},
  series = {IEEE/ION Position, Location and Navigation Symposium (PLANS) ; 5-8 May 2014, Monterey, Calif.},
  booktitle = {IEEE/ION Position, Location and Navigation Symposium (PLANS) ; 5-8 May 2014, Monterey, Calif.},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Position, Location and Navigation Symposium <2014, Monterey, Calif.>},
  isbn      = {978-1-4799-3319-8},
  pages     = {959 -- 975},
  year      = {2014},
  language  = {en}
}
@inproceedings{Meliss1995,
  author    = {Meliß, Michael},
  title     = {Nettoenergie-Analysen von Energiesystemen},
  series = {16. Hochschultage Energie, Tagungsberichte, Essen, 27.-28. Sept. 1995},
  booktitle = {16. Hochschultage Energie, Tagungsberichte, Essen, 27.-28. Sept. 1995},
  publisher = {Pomp},
  address   = {Bottrop},
  isbn      = {3-89355-900-0},
  pages     = {121 -- 142},
  year      = {1995},
  language  = {de}
}
@inproceedings{MuellerLorenz2009,
  author    = {M{\"u}ller, Karsten and Lorenz, U.},
  title     = {Neue Entwicklungen in der Abwasserw{\"a}rmenutzung : Ergebnisse einer Potenzialstudie f{\"u}r das Kanalnetz der Stadt Aachen},
  series = {42. Essener Tagung f{\"u}r Wasser- und Abfallwirtschaft : vom 18.3. - 20.3. 2009 im Eurogress Aachen / hrsg. von Johannes Pinnekamp. Gew{\"a}sserschutz - Wasser - Abwasser. Bd. 217},
  booktitle = {42. Essener Tagung f{\"u}r Wasser- und Abfallwirtschaft : vom 18.3. - 20.3. 2009 im Eurogress Aachen / hrsg. von Johannes Pinnekamp. Gew{\"a}sserschutz - Wasser - Abwasser. Bd. 217},
  publisher = {Ges. zur F{\"o}rderung der Siedlungswasserwirtschaft an der RWTH Aachen},
  address   = {Aachen},
  isbn      = {978-3-938996-23-2},
  pages     = {40/1 -- 40/14},
  year      = {2009},
  language  = {de}
}
@inproceedings{HellmannsBoehmDilgeretal.2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus and Welters, T.},
  title     = {Neue M{\"o}glichkeiten der Klebstoffverarbeitung durch geschwindigkeitsproportionalen Handauftrag},
  series = {Adhesive bonding and hybrid bonding in body-in-white shop and assembly : proceedings, 25/26 April 2006, Bad Nauheim/Frankfurt},
  booktitle = {Adhesive bonding and hybrid bonding in body-in-white shop and assembly : proceedings, 25/26 April 2006, Bad Nauheim/Frankfurt},
  publisher = {Technik \& Kommunikation Verl.-GmbH},
  address   = {Berlin},
  pages     = {81},
  year      = {2006},
  language  = {de}
}