@article{SimonisLuethWangetal.2003,
  author    = {Simonis, A. and L{\"u}th, H. and Wang, J. and Sch{\"o}ning, Michael Josef},
  title     = {Strategies of miniaturised reference electrodes integrated in a silicon-based „one chip" pH sensor},
  series = {Sensors. 3 (2003), H. 9},
  journal   = {Sensors. 3 (2003), H. 9},
  isbn      = {1424-8220},
  pages     = {330 -- 339},
  year      = {2003},
  language  = {en}
}
@article{OberlaenderKirchnerKeusgenetal.2015,
  author    = {Oberl{\"a}nder, Jan and Kirchner, Patrick and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials},
  series = {Electrochimica Acta},
  volume    = {183},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2015.06.126},
  pages     = {130 -- 136},
  year      = {2015},
  abstract  = {The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor's thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).},
  language  = {en}
}
@inproceedings{KapoorBollerGiljohannetal.2010,
  author    = {Kapoor, Hrshi and Boller, Christian and Giljohann, Sebastian and Braun, Carsten},
  title     = {Strategies for structural health monitoring implementation potential assessment in aircraft operational life extension considerations},
  series = {2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany},
  booktitle = {2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany},
  publisher = {Dt. Gesellschaft f{\"u}r Zerst{\"o}rungsfreie Pr{\"u}fung},
  address   = {Berlin},
  organization    = {Deutsche Gesellschaft f{\"u}r Zerst{\"o}rungsfreie Pr{\"u}fung},
  isbn      = {978-3-940283-28-3},
  pages     = {9},
  year      = {2010},
  language  = {en}
}
@incollection{PfetschAbeleAltherretal.2021,
  author    = {Pfetsch, Marc E. and Abele, Eberhard and Altherr, Lena and B{\"o}lling, Christian and Br{\"o}tz, Nicolas and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Groche, Peter and Hoppe, Florian and Kirchner, Eckhard and Kloberdanz, Hermann and Knoll, Maximilian and Kolvenbach, Philip and Kuttich-Meinlschmidt, Anja and Leise, Philipp and Lorenz, Ulf and Matei, Alexander and Molitor, Dirk A. and Niessen, Pia and Pelz, Peter F. and Rexer, Manuel and Schmitt, Andreas and Schmitt, Johann M. and Schulte, Fiona and Ulbrich, Stefan and Weigold, Matthias},
  title     = {Strategies for mastering uncertainty},
  series = {Mastering uncertainty in mechanical engineering},
  booktitle = {Mastering uncertainty in mechanical engineering},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-78353-2},
  doi       = {10.1007/978-3-030-78354-9_6},
  pages     = {365 -- 456},
  year      = {2021},
  abstract  = {This chapter describes three general strategies to master uncertainty in technical systems: robustness, flexibility and resilience. It builds on the previous chapters about methods to analyse and identify uncertainty and may rely on the availability of technologies for particular systems, such as active components. Robustness aims for the design of technical systems that are insensitive to anticipated uncertainties. Flexibility increases the ability of a system to work under different situations. Resilience extends this characteristic by requiring a given minimal functional performance, even after disturbances or failure of system components, and it may incorporate recovery. The three strategies are described and discussed in turn. Moreover, they are demonstrated on specific technical systems.},
  language  = {en}
}
@article{KeusgenSchoening2004,
  author    = {Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Strategies for biosensoric detection of potential drugs in nature},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {1004 -- 1005},
  year      = {2004},
  language  = {en}
}
@book{Mueller2006,
  author    = {M{\"u}ller, Karsten},
  title     = {Strategien zur Zustandserfassung von Kanalisationen. Aachener Schriften zur Stadtentw{\"a}sserung. Bd 7},
  publisher = {Ges. zur F{\"o}rderung der Siedlungswasserwirtschaft an der RWTH Aachen},
  address   = {Aachen},
  isbn      = {978-3-938996-00-3},
  pages     = {IX, 178, 7 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {de}
}
@inproceedings{Mueller2007,
  author    = {M{\"u}ller, Karsten},
  title     = {Strategien zur Zustandserfassung von Kanalisationen},
  series = {Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29},
  booktitle = {Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29},
  publisher = {Inst. f{\"u}r Siedlungs- und Industriewasserwirtschaft},
  address   = {Dresden},
  pages     = {39 -- 50},
  year      = {2007},
  language  = {de}
}
@phdthesis{Mueller2005,
  author    = {M{\"u}ller, Karsten},
  title     = {Strategien zur Zustandserfassung von Kanalisationen},
  pages     = {IX, 181, A-105 S. : graph. Darst.},
  year      = {2005},
  language  = {de}
}
@inproceedings{Mueller2004,
  author    = {M{\"u}ller, Karsten},
  title     = {Strategien der Zustandserfassung von Abwasserkan{\"a}len},
  series = {Entwicklungen in der Kanalisationstechnik : schriftliche Fassungen der Vortr{\"a}ge zur 5. Tagung "Entwicklungen in der Kanalisationstechnik" : am 22. und 23. Juni 2004 in K{\"o}ln / MUNLV, Ministerium f{\"u}r Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen, D{\"u}sseldorf ... Tagungsleitung: Max Dohmann ... Aachener Schriften zur Stadtentwaesserung ASS. Bd. 5},
  booktitle = {Entwicklungen in der Kanalisationstechnik : schriftliche Fassungen der Vortr{\"a}ge zur 5. Tagung "Entwicklungen in der Kanalisationstechnik" : am 22. und 23. Juni 2004 in K{\"o}ln / MUNLV, Ministerium f{\"u}r Umwelt und Naturschutz, Landwirtschaft und Verbraucherschutz des Landes Nordrhein-Westfalen, D{\"u}sseldorf ... Tagungsleitung: Max Dohmann ... Aachener Schriften zur Stadtentwaesserung ASS. Bd. 5},
  publisher = {Institut f{\"u}r Siedlungswasserwirtschaft der RWTH Aachen},
  address   = {Aachen},
  pages     = {1 -- 16},
  year      = {2004},
  language  = {de}
}
@article{ZiemonsBerghoffLanskeetal.1988,
  author    = {Ziemons, Karl and Berghoff, G. and Lanske, D. and Schultze, K.},
  title     = {Strangeness production in deep inelastic muon-nucleon scattering},
  series = {Verhandlungen der Deutschen Physikalischen Gesellschaft},
  volume    = {23},
  journal   = {Verhandlungen der Deutschen Physikalischen Gesellschaft},
  number    = {5},
  isbn      = {0420-0195},
  pages     = {T309 -- T309},
  year      = {1988},
  language  = {en}
}
@article{FoersterLentzenGerthsen1995,
  author    = {F{\"o}rster, Arnold and Lentzen, M. and Gerthsen, D.},
  title     = {Strain relaxation of lattice-mismatched In0.2Ga0.8As/GaAs superlattices on GaAs(001) substrates / M. Lentzen ; D. Gerthsen ; A. F{\"o}rster ...},
  series = {Microscopy of semiconducting materials 1995 : proceedings of the Institute of Physics Conference held at Oxford University, 20 - 23 March 1995 / Ed. by A G Cullis ... - (Conference series / Institute of Physics ; 146)},
  journal   = {Microscopy of semiconducting materials 1995 : proceedings of the Institute of Physics Conference held at Oxford University, 20 - 23 March 1995 / Ed. by A G Cullis ... - (Conference series / Institute of Physics ; 146)},
  publisher = {Institute of Physics},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0347-6},
  pages     = {357 -- ff.},
  year      = {1995},
  language  = {en}
}
@article{FoersterRosenauerRemmele1997,
  author    = {F{\"o}rster, Arnold and Rosenauer, A. and Remmele, T.},
  title     = {Strain determination in mismatched semiconductor heterostructures by the digital analysis of lattice images / A. Rosenauer ; T. Remmele ; U. Fischer ; A. F{\"o}rster ...},
  series = {Microscopy of semiconducting materials 1997 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 7 - 10 April 1997 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 157)},
  journal   = {Microscopy of semiconducting materials 1997 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 7 - 10 April 1997 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 157)},
  publisher = {Institute of Physics},
  address   = {Bristol [u.a.]},
  isbn      = {0-7503-0464-2},
  pages     = {39 -- ff.},
  year      = {1997},
  language  = {en}
}
@article{FoersterOhlerKohleick1994,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Kohleick, R.},
  title     = {Strain dependence of the valence-band offset in InAs/GaAs heterojunctions determined by ultraviolet photoelectron spectroscopy / C. Ohler ; R. Kohleick ; A. F{\"o}rster ...},
  series = {Physical Review B . 50 (1994), H. 11},
  journal   = {Physical Review B . 50 (1994), H. 11},
  isbn      = {0163-1829},
  pages     = {7833 -- 7837},
  year      = {1994},
  language  = {en}
}
@article{FoersterOhlerMoers1993,
  author    = {F{\"o}rster, Arnold and Ohler, C. and Moers, J.},
  title     = {Strain dependence of the valence-band offset in arsenide compound heterojunctions determined by photoelectron spectroscopy / C. Ohler ; J. Moers ; A. F{\"o}rster ...},
  series = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 13 (1993), H. 4},
  journal   = {Journal of Vacuum Science \& Technology B: Microelectronics and Nanometer Structures. 13 (1993), H. 4},
  isbn      = {1071-1023},
  pages     = {1728 -- 1735},
  year      = {1993},
  language  = {en}
}
@inproceedings{StaatTran2022,
  author    = {Staat, Manfred and Tran, Ngoc Trinh},
  title     = {Strain based brittle failure criteria for rocks},
  series = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  booktitle = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  publisher = {Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)},
  address   = {Hanoi},
  isbn      = {978-604-357-084-7},
  pages     = {500 -- 509},
  year      = {2022},
  abstract  = {When confining pressure is low or absent, extensional fractures are typical, with fractures occurring on unloaded planes in rock. These "paradox" fractures can be explained by a phenomenological extension strain failure criterion. In the past, a simple empirical criterion for fracture initiation in brittle rock has been developed. But this criterion makes unrealistic strength predictions in biaxial compression and tension. A new extension strain criterion overcomes this limitation by adding a weighted principal shear component. The weight is chosen, such that the enriched extension strain criterion represents the same failure surface as the Mohr-Coulomb (MC) criterion. Thus, the MC criterion has been derived as an extension strain criterion predicting failure modes, which are unexpected in the understanding of the failure of cohesive-frictional materials. In progressive damage of rock, the most likely fracture direction is orthogonal to the maximum extension strain. The enriched extension strain criterion is proposed as a threshold surface for crack initiation CI and crack damage CD and as a failure surface at peak P. Examples show that the enriched extension strain criterion predicts much lower volumes of damaged rock mass compared to the simple extension strain criterion.},
  language  = {en}
}
@book{Havermann2000,
  author    = {Havermann, Marc},
  title     = {Strahlmischung und Druckr{\"u}ckgewinn in {\"U}berschall-Innenstr{\"o}mungen},
  publisher = {Mainz},
  address   = {Aachen},
  isbn      = {3-86073-761-9},
  pages     = {XIV, 137 S. : Ill., graph. Darst.},
  year      = {2000},
  language  = {de}
}
@misc{Wahle1994,
  author    = {Wahle, Michael},
  title     = {Stoßd{\"a}mpfer : Offenlegungschrift / Europ{\"a}ische Patentschrift},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt},
  address   = {M{\"u}nchen / Den Hague},
  pages     = {7 S. : graph. Darst.},
  year      = {1994},
  language  = {de}
}
@incollection{MeskourisButenwegHinzenetal.2019,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger},
  title     = {Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response},
  series = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-57550-5 (Online)},
  doi       = {10.1007/978-3-662-57550-5_3},
  pages     = {153 -- 196},
  year      = {2019},
  abstract  = {Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.},
  language  = {en}
}
@inproceedings{Gligorevic2013,
  author    = {Gligorevic, Snjezana},
  title     = {Stochastic modeling of non-stationary channels},
  series = {7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden},
  booktitle = {7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {European Association on Antennas and Propagation},
  isbn      = {978-1-4673-2187-7 ; 978-88-907018-1-8},
  pages     = {1677 -- 1681},
  year      = {2013},
  language  = {en}
}
@article{GerhardtRudolph2000,
  author    = {Gerhardt, Hans Joachim and Rudolph, M.},
  title     = {Steuerungsstrategien f{\"u}r Fensterbet{\"a}tigungen von Hochh{\"a}usern. Nat{\"u}rliche L{\"u}ftung},
  series = {HLH - Heizung, L{\"u}ftung, Klima, Haustechnik. 51 (2000), H. 9},
  journal   = {HLH - Heizung, L{\"u}ftung, Klima, Haustechnik. 51 (2000), H. 9},
  isbn      = {1436-5103},
  pages     = {48 -- 52},
  year      = {2000},
  language  = {de}
}
@book{Barnat2013,
  author    = {Barnat, Miriam},
  title     = {Steuerungsstil : eine Untersuchung von Steuerungsprozessen aus kommunikations- und netzwerkorientierter Perspektive am Beispiel der Wikipedia},
  publisher = {Techn. Univ. Hamburg-Harburg},
  address   = {Hamburg},
  doi       = {10.15480/882.1132},
  pages     = {Online-Ressource (PDF-Datei: 219 S., 5.399 KB) : graph. Darst.},
  year      = {2013},
  language  = {de}
}
@misc{SchumannRoginSchneideretal.2012,
  author    = {Schumann, C. and Rogin, S. and Schneider, H. and Oster, J. and Tippk{\"o}tter, Nils and Kampeis, P.},
  title     = {Steuerung von HGMS-Prozessen mittels Durchflusszytometrie},
  series = {Chemie Ingenieur Technik},
  volume    = {84},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201250125},
  pages     = {1370},
  year      = {2012},
  abstract  = {Die Hochgradientenmagnetseparation (HGMS) ist eine Methode zur Aufreinigung von biopharmazeutischen Produkten. Mit dieser Methode l{\"a}sst sich in nur einem Schritt eine Fest/Fest/Fl{\"u}ssig-Trennung erzielen, was zu einer erheblichen Zeit- und Kostenersparnis im Downstreaming f{\"u}hrt. Dennoch steht ihr industrieller Einsatz noch aus, was u. a. am Mangel an Analysenmethoden liegt, um die HGMS quantifizierbar zu machen. Gerade in der Pharmaproduktion werden Prozesse gebraucht, die gem{\"a}ß den einschl{\"a}gigen Vorschriften (cGMP) validiert und deren verfahrenstechnische Anlagenteile qualifiziert werden k{\"o}nnen. Die Schwierigkeit ist die Messung der magnetischen Mikrosorbentien in der Suspension, in der auch Zellen oder Zelltr{\"u}mmer vorliegen. Im Rahmen eines Forschungsprojektes im „Zentralen Innovationsprogramm Mittelstand" des BMWi wurden verschiedene Analysenmethoden untersucht. Die Durchflusszytometrie erm{\"o}glicht eine Charakterisierung von Partikeln und eine simultane quantitative Messung. Durch die multiparametrige Messung kann zwischen Zellen, Zelltr{\"u}mmern und Magnetpartikeln unterschieden werden. Die At-line-Einbindung des Durchflusszytometers ist durch den Einsatz einer externen Pumpe m{\"o}glich. {\"U}ber eine automatisierte Messwertanalyse kann der HGMS-Prozess mittels der Durchflusszytometrie gesteuert werden.},
  language  = {de}
}
@book{Goldbach2002,
  author    = {Goldbach, Daniel},
  title     = {Steuerung und Regelung der aktiven Anh{\"a}ngerkupplung eines Farhzeuggespanns},
  year      = {2002},
  language  = {de}
}
@article{Alt1986,
  author    = {Alt, Helmut},
  title     = {Steuersenkungsgesetz-Auswirkungen und Berechnung},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 85},
  journal   = {Elektrizit{\"a}tswirtschaft},
  issn      = {0013-5496},
  pages     = {238 -- 242},
  year      = {1986},
  language  = {de}
}
@article{Alt1987,
  author    = {Alt, Helmut},
  title     = {Steuersenkungs-Erweiterungsgesetz 1988 zur Gesamtentlastung der Einkommensteuer},
  series = {Betriebs-Berater : BB ; Zeitschrift f{\"u}r Recht und Wirtschaft},
  volume    = {Vol. 42},
  journal   = {Betriebs-Berater : BB ; Zeitschrift f{\"u}r Recht und Wirtschaft},
  number    = {H. 32},
  issn      = {0340-7918},
  pages     = {2207 -- 2208},
  year      = {1987},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Steuerreformgesetz 1990},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Bd. 88},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 1/2},
  issn      = {0013-5496},
  pages     = {78 -- 83},
  year      = {1989},
  language  = {de}
}
@article{Alt1989,
  author    = {Alt, Helmut},
  title     = {Steuerreformgesetz 1990},
  series = {Elektrizit{\"a}tswirtschaft},
  volume    = {Jg. 88},
  journal   = {Elektrizit{\"a}tswirtschaft},
  number    = {H. 2},
  issn      = {0947-0581 (E-Journal); 0340-7918 (Print)},
  pages     = {120 -- 121},
  year      = {1989},
  language  = {de}
}
@book{Rick1989,
  author    = {Rick, Heino},
  title     = {Steuerreform 1990 : alle {\"A}nderungen u. Auswirkungen f{\"u}r Unternehmen u. Selbst{\"a}ndige ; {\"A}nderungen u. Auswirkungen nach Problem- u. Sachbereichen ; Gesetzestext ; Was ist neu? ; Auswirkungen u. Beisp., Modellabrechnungen},
  publisher = {WEKA-Fachverl., Fachverl. f{\"u}r Gesch{\"a}ftsf{\"u}hrung u. Management},
  address   = {Kissing [u.a.]},
  pages     = {143 S. : graph. Darst.},
  year      = {1989},
  language  = {de}
}
@misc{Olbertz2017,
  author    = {Olbertz, Klaus},
  title     = {Steuerliche Ber{\"u}cksichtigung von Zuzahlungen f{\"u}r Bereitschaftsdienstzeiten},
  series = {Gesellschafts- und Wirtschaftsrecht : GWR},
  journal   = {Gesellschafts- und Wirtschaftsrecht : GWR},
  issn      = {1868-1816},
  pages     = {145 -- 145},
  year      = {2017},
  language  = {de}
}
@article{Rick2007,
  author    = {Rick, Heino},
  title     = {Steuerliche Aspekte zum Vertragsarztrechts{\"a}nderungsgesetz (V{\"A}ndG) 2007},
  series = {BVGD-Info : Mitteilungen des Bundesverbandes Gastroenterologie Deutschland. 2 (2007), H. 4},
  journal   = {BVGD-Info : Mitteilungen des Bundesverbandes Gastroenterologie Deutschland. 2 (2007), H. 4},
  pages     = {91 -- 92},
  year      = {2007},
  language  = {de}
}
@article{Blome1999,
  author    = {Blome, Hans-Joachim},
  title     = {Sternstunden der Astronomie Extraterrestrische Grundlagenforschung},
  series = {Kultur und Technik. 23 (1999), H. 1},
  journal   = {Kultur und Technik. 23 (1999), H. 1},
  isbn      = {0344-5690},
  pages     = {18 -- 27},
  year      = {1999},
  language  = {de}
}
@book{Blome2002,
  author    = {Blome, Hans-Joachim},
  title     = {Sterne und Weltraum},
  editor    = {Raith, Wilhelm},
  edition   = {2., stark erw. und aktualisierte Aufl.},
  publisher = {de Gruyter},
  address   = {Berlin [u.a.]},
  isbn      = {3-11-016866-9},
  pages     = {XIV, 618 S. : zahlr. Ill. und graph. Darst.},
  year      = {2002},
  language  = {de}
}
@article{JildehWagnerSchoening2021,
  author    = {Jildeh, Zaid B. and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Sterilization of Objects, Products, and Packaging Surfaces and Their Characterization in Different Fields of Industry: The Status in 2020},
  series = {physica status solidi (a) applications and materials science},
  volume    = {218},
  journal   = {physica status solidi (a) applications and materials science},
  number    = {13},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.202000732},
  pages     = {27 Seiten},
  year      = {2021},
  abstract  = {The treatment method to deactivate viable microorganisms from objects or products is termed sterilization. There are multiple forms of sterilization, each intended to be applied for a specific target, which depends on—but not limited to—the thermal, physical, and chemical stability of that target. Herein, an overview on the currently used sterilization processes in the global market is provided. Different sterilization techniques are grouped under a category that describes the method of treatment: radiation (gamma, electron beam, X-ray, and ultraviolet), thermal (dry and moist heat), and chemical (ethylene oxide, ozone, chlorine dioxide, and hydrogen peroxide). For each sterilization process, the typical process parameters as defined by regulations and the mode of antimicrobial activity are summarized. Finally, the recommended microorganisms that are used as biological indicators to validate sterilization processes in accordance with the rules that are established by various regulatory agencies are summarized.},
  language  = {en}
}
@article{MangKricheldorf1983,
  author    = {Mang, Thomas and Kricheldorf, Hans R.},
  title     = {Stereospecificity of peptide synthesis by means of phosphorus derivatives: a model of peptide synthesis in molecular evolution / Kricheldorf, Hans R. ; Mang, Thomas},
  series = {International Journal of Biological Macromolecules. 5 (1983), H. 5},
  journal   = {International Journal of Biological Macromolecules. 5 (1983), H. 5},
  isbn      = {0141-8130},
  pages     = {258 -- 266},
  year      = {1983},
  language  = {en}
}
@article{SelmerDarleyCleggetal.2003,
  author    = {Selmer, Thorsten and Darley, Dan J. and Clegg, William and Harrington, Ross W.},
  title     = {Stereocontrolled Synthesis of (2R,3S)-2-Methylisocitrate, a Central Intermediate in the Methylcitrate Cycle / Darley, Dan J. ; Selmer, Thorsten ; Clegg, William ; Harrington, Ross W. ; Buckel, Wolfgang ; Golding, Bernardt},
  series = {Helvetica chimica acta. 86 (2003), H. 12},
  journal   = {Helvetica chimica acta. 86 (2003), H. 12},
  isbn      = {1522-2675},
  pages     = {3991 -- 3999},
  year      = {2003},
  language  = {en}
}
@article{SelmerScottNaeseretal.2004,
  author    = {Selmer, Thorsten and Scott, Richard and N{\"a}ser, Ulrike and Friedrich, Peter},
  title     = {Stereochemistry of hydrogen removal from the 'unactivated' C-3 position of 4-hydroxybutyryl-CoA catalysed by 4-hydroxybutyryl-CoA dehydratase / Scott, R. ; N{\"a}ser, U. ; Friedrich, P. ; Selmer, T. ; Buckel, W. ; Golding, BT.},
  series = {Chemical Communications : ChemCom (2004)},
  journal   = {Chemical Communications : ChemCom (2004)},
  isbn      = {1364-548X},
  pages     = {1210 -- 1211},
  year      = {2004},
  language  = {en}
}
@book{KaminskyKallweitWeberetal.2006,
  author    = {Kaminsky, Radoslav and Kallweit, Stephan and Weber, Hans-Joachim and Simons, Antoine and Verdonck, Pascal},
  title     = {Stereo high speed PIV measurements behind two different artificial heart valves},
  pages     = {9 S. : Ill., graph. Darst.},
  year      = {2006},
  language  = {en}
}
@book{Laack2018,
  author    = {Laack, Walter van},
  title     = {Sterben und Tod aus wissenschaftlicher Sicht - dying and death from a scientific point of view},
  publisher = {van Laack GmbH},
  address   = {Aachen},
  isbn      = {978-3-936624-41-0},
  pages     = {44 Seiten},
  year      = {2018},
  language  = {de}
}
@incollection{ChansonBungMatos2015,
  author    = {Chanson, Hubert and Bung, Daniel Bernhard and Matos, J.},
  title     = {Stepped spillways and cascades},
  series = {Energy dissipation in hydraulic structures / Hubert Chanson (ed.)},
  booktitle = {Energy dissipation in hydraulic structures / Hubert Chanson (ed.)},
  publisher = {CRC Press},
  address   = {Boca Raton, Fla. [u.a.]},
  isbn      = {978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)},
  pages     = {45 -- 64},
  year      = {2015},
  language  = {en}
}
@article{Heinrichs1992,
  author    = {Heinrichs, Horst},
  title     = {STEP bietet mehr},
  publisher = {IKOSS},
  address   = {Stuttgart},
  pages     = {327 -- 344},
  year      = {1992},
  language  = {de}
}
@inproceedings{Dahmann2011,
  author    = {Dahmann, Peter},
  title     = {Stemme S10 VTX als multifunktionales Forschungsflugzeug},
  series = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  isbn      = {978-3-9321-8274-7},
  pages     = {357 -- 364},
  year      = {2011},
  language  = {de}
}
@book{Artmann2011,
  author    = {Artmann, Gerhard},
  title     = {Stem cell engineering : principles and applications / Gerhard M. Artmann ... eds.},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-642-11864-7},
  pages     = {XLI, 541 S. : Ill., graph. Darst.},
  year      = {2011},
  language  = {en}
}
@book{HegewaldBoeminghaus1973,
  author    = {Hegewald, Ulf and Boeminghaus, Dieter},
  title     = {Stellungen : 9 Texte, 9 Zeichnungen / [Texte] Dieter Boeminghaus ; [Zeichnungen] Ulf Hegewald},
  publisher = {Selbstverl. [Boeminghaus]},
  address   = {Aachen},
  pages     = {25 S. : {\"u}berw. Ill.},
  year      = {1973},
  language  = {de}
}
@article{LaackRefisch1986,
  author    = {Laack, Walter van and Refisch, A.},
  title     = {Stellenwert der Kniegelenksarthroskopie aus diagnostischer und therapeutischer Sicht},
  series = {Aktuelle Ergebnisse der Osteologie : Timmendorfer Strand, 21. - 23. November 1985 / hrsg. von P. Dietsch},
  journal   = {Aktuelle Ergebnisse der Osteologie : Timmendorfer Strand, 21. - 23. November 1985 / hrsg. von P. Dietsch},
  publisher = {de Gruyter},
  address   = {Berlin},
  isbn      = {3-11-011147-0},
  pages     = {XIV, 343 S. : Ill., graph. Darst.},
  year      = {1986},
  language  = {de}
}
@masterthesis{Leiwen2023,
  type      = {Bachelor Thesis},
  author    = {Leiwen, Sophie},
  title     = {Steinreich : Mineralien des Siegerlands},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {69 Seiten},
  year      = {2023},
  abstract  = {Der Aufbau und die Entstehung unseres Planeten sind untrennbar mit der Bildung von Gesteinen verbunden - diese setzen sich aus verschiedenen Mineralien zusammen. Sie sind in der Natur weit verbreitet und spielen eine entscheidende Rolle in unserem t{\"a}glichen Leben. Obwohl vielen Menschen der Nutzen von Bodensch{\"a}tzen bewusst ist, besteht ein geringes Wissen {\"u}ber deren Vorkommen und Relevanz. F{\"u}r die wirtschaftliche Entwicklung des Siegerlandes beispielsweise waren der Abbau und der Handel mit Mineralien von großer Bedeutung. Insbesondere der langj{\"a}hrige Abbau von Eisenerz legte den Grundstein f{\"u}r die gesamte Metallindustrie der Region. Die Publikation visualisiert eine umfangreiche Sammlung Siegerl{\"a}nder Mineralien und vermittelt ein grundlegendes Verst{\"a}ndnis von Mineralien.},
  language  = {de}
}
@inproceedings{MaikeLenzWolf2014,
  author    = {Maike, M{\"u}ller and Lenz, Laura and Wolf, Martin R.},
  title     = {Steigerung der Effektivit{\"a}t durch Prozessmodellierungs-Tools - {\"A}nderbarkeit und Transparenz von Prozessen am Beispiel der Business Simulation Apollo 13},
  series = {Informatik 2014},
  booktitle = {Informatik 2014},
  publisher = {Gesellschaft f{\"u}r Informatik e.V.},
  address   = {Bonn},
  isbn      = {978-3-88579-626-8},
  issn      = {1617-5468},
  pages     = {357 -- 369},
  year      = {2014},
  abstract  = {Die Nutzung von Prozessmodellierungsmethoden oder - werkzeugen kann erheblichen Einfluss auf die Effektivit{\"a}t von Prozessen haben. Das gilt insbesondere f{\"u}r Situationen, in denen Personen unter Stress stehen oder unge{\"u}bt sind. In diesen F{\"a}llen geben Prozessmodelle konkrete Empfehlungen, nach denen sich die handelnden Personen richten k{\"o}nnten. In Experimenten mit der Business-Simulation Apollo 13 haben wir den Effekt eines Einsatzes von Prozessmodellierungsmethoden und -werkzeugen untersucht. Bereits bekannte Theorien (z.B. {\"u}ber geeignete Verh{\"a}ltnisse von Kommunikationsinhalten) konnten best{\"a}tigt werden. Dar{\"u}ber hinaus haben wir eine besondere Bedeutung der {\"U}bertragbarkeit von Prozessmodellen in konkrete Handlungen identifiziert.},
  language  = {de}
}
@book{FockeSteinbeck2018,
  author    = {Focke, Markus and Steinbeck, J{\"o}rn},
  title     = {Steigerung der Anlagenproduktivit{\"a}t durch OEE-Management : Definitionen, Vorgehen und Methoden - von manuell bis Industrie 4.0},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-21456-2},
  doi       = {10.1007/978-3-658-21456-2},
  year      = {2018},
  language  = {de}
}
@article{DoeringRegerKuhnhenneetal.2015,
  author    = {D{\"o}ring, Bernd and Reger, Vitali and Kuhnhenne, Markus and Feldmann, Markus and Kesti, Jyrki and Lawson, Mark and Botti, Andrea},
  title     = {Steel solutions for enabling zero-energy buildings},
  series = {Steel Construction - Design and Research},
  volume    = {8},
  journal   = {Steel Construction - Design and Research},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1867-0539},
  doi       = {10.1002/stco.201510029},
  pages     = {194 -- 200},
  year      = {2015},
  language  = {en}
}
@techreport{ConanD'HaeyerBeguinetal.2006,
  author    = {Conan, Yulian and D'Haeyer, R. and B{\´e}guin, P. and D{\"o}ring, Bernd and Kuhnhenne, Markus and Bayo, E.},
  title     = {Steel in low-rise building : a symbiosis of cold formed sections and light rolled profiles : final report. Contract-No. 7215-PP/070. EUR 22080 en},
  publisher = {Office for Official Publications of the European Communities},
  address   = {Luxembourg},
  isbn      = {92-79-02082-X},
  pages     = {200 S.},
  year      = {2006},
  language  = {en}
}
@article{Benkner1995,
  author    = {Benkner, Thorsten},
  title     = {Statistisches Multiplexen von Sprache und Daten in TDMA-Mobilfunksystemen der dritten Generation},
  series = {40. Internationales Wissenschaftliches Kolloquium : 18. - 21.09.1995 / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen. [Hrsg. Dagmar Schipanski]},
  journal   = {40. Internationales Wissenschaftliches Kolloquium : 18. - 21.09.1995 / Technische Universit{\"a}t Ilmenau, Th{\"u}ringen. [Hrsg. Dagmar Schipanski]},
  address   = {Ilmenau},
  year      = {1995},
  language  = {de}
}
@book{Weigand2006,
  author    = {Weigand, Christoph},
  title     = {Statistik mit und ohne Zufall : eine anwendungsorientierte Einf{\"u}hrung ; mit 10 Tabellen / Christoph Weigand},
  publisher = {Physica-Verl.},
  address   = {Heidelberg},
  isbn      = {3-7908-1693-0},
  pages     = {XIII, 421 S. : graph. Darst.},
  year      = {2006},
  language  = {de}
}
@book{Weigand2009,
  author    = {Weigand, Christoph},
  title     = {Statistik mit und ohne Zufall : Eine anwendungsorientierte Einf{\"u}hrung . 2. Aufl.},
  publisher = {Physica-Verlag},
  address   = {Heidelberg},
  isbn      = {978-3-7908-2346-2},
  pages     = {XIII, 469 S. : Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@book{Weigand2019,
  author    = {Weigand, Christoph},
  title     = {Statistik mit und ohne Zufall : Eine anwendungsorientierte Einf{\"u}hrung},
  edition   = {3. Aufl.},
  publisher = {Springer Spektrum},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-59309-7},
  doi       = {10.1007/978-3-662-59309-7},
  pages     = {499 S.},
  year      = {2019},
  language  = {de}
}
@article{Weigand2012,
  author    = {Weigand, Christoph},
  title     = {Statistical Tests Based on Reliability and Precision},
  series = {Economic Quality Control : EQC ; international journal for quality and reliability},
  volume    = {27},
  journal   = {Economic Quality Control : EQC ; international journal for quality and reliability},
  number    = {1},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {1869-6147},
  doi       = {10.1515/eqc-2012-0002},
  pages     = {43 -- 64},
  year      = {2012},
  abstract  = {The construction of a statistical test is investigated which is based only on "reliability" and "precision" as quality criteria. The reliability of a statistical test is quantifiedin a straightforward way by the probability that the decision of the test is correct. However, the quantification of the precision of a statistical test is not at all evident. Thereforethe paper presents and discusses several approaches. Moreover the distinction of "nullhypothesis" and "alternative hypothesis" is not necessary any longer.},
  language  = {en}
}
@article{HeinrichBlumBussmannetal.2002,
  author    = {Heinrich, U. and Blum, A. and Bussmann, N. and Engels, R. and Kemmerling, G. and Weber, S. and Ziemons, Karl},
  title     = {Statistical studies on the light output and energy resolution of small LSO single crystals with different surface treatments combined with various reflector materials},
  series = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  volume    = {486},
  journal   = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  number    = {1-2},
  issn      = {0168-9002},
  pages     = {60 -- 66},
  year      = {2002},
  abstract  = {The optimization of light output and energy resolution of scintillators is of special interest for the development of high resolution and high sensitivity PET. The aim of this work is to obtain statistically reliable results concerning optimal surface treatment of scintillation crystals and the selection of reflector material. For this purpose, raw, mechanically polished and etched LSO crystals (size 2×2×10 mm3) were combined with various reflector materials (Teflon tape, Teflon matrix, BaSO4) and exposed to a 22Na source. In order to ensure the statistical reliability of the results, groups of 10 LSO crystals each were measured for all combinations of surface treatment and reflector material. Using no reflector material the light output increased up to 551±35\% by mechanical polishing the surface compared to 100±5\% for raw crystals. Etching the surface increased the light output to 441±29\%. The untreated crystals had an energy resolution of 24.6±4.0\%. By mechanical polishing the surface it was possible to achieve an energy resolution of 13.2±0.8\%, by etching of 14.8±0.7\%. In combination with BaSO4 as reflector material the maximum increase of light output has been established to 932±57\% for mechanically polished and 895±61\% for etched crystals. The combination with BaSO4 also caused the best improvement of the energy resolution up to 11.6±0.2\% for mechanically polished and 12.2±0.3\% for etched crystals. Relating to the light output there was no significant statistical difference between the two surface treatments in combination with BaSO4. In contrast to this, the statistical results of the energy resolution have shown the combination of mechanical polishing and BaSO4 as the optimum.},
  language  = {en}
}
@article{HartungGirod1996,
  author    = {Hartung, Frank and Girod, Bernd},
  title     = {Statistical optimization of switched two-level quantizers with application to DPCM encoding of color video / Hartung, Frank ; Girod, Bernd},
  series = {IEEE International Conference on Acoustics, Speech, and Signal Processing, 1996. ICASSP-96. Conference Proceedings., 1996},
  journal   = {IEEE International Conference on Acoustics, Speech, and Signal Processing, 1996. ICASSP-96. Conference Proceedings., 1996},
  isbn      = {0-7803-3192-3},
  pages     = {1974 -- 1977},
  year      = {1996},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@book{Maercker1997,
  author    = {Maercker, Gisela},
  title     = {Statistical inference in conditional heteroskedastic autoregressive models},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-2486-1},
  pages     = {87 S.: graph. Darst.},
  year      = {1997},
  language  = {en}
}
@article{BaringhausGaigallThiele2018,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel and Thiele, Jan Philipp},
  title     = {Statistical inference for L²-distances to uniformity},
  series = {Computational Statistics},
  volume    = {2018},
  journal   = {Computational Statistics},
  number    = {33},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1613-9658},
  doi       = {10.1007/s00180-018-0820-0},
  pages     = {1863 -- 1896},
  year      = {2018},
  abstract  = {The paper deals with the asymptotic behaviour of estimators, statistical tests and confidence intervals for L²-distances to uniformity based on the empirical distribution function, the integrated empirical distribution function and the integrated empirical survival function. Approximations of power functions, confidence intervals for the L²-distances and statistical neighbourhood-of-uniformity validation tests are obtained as main applications. The finite sample behaviour of the procedures is illustrated by a simulation study.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2018,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan},
  title     = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel},
  series = {The International Journal of Advanced Manufacturing Technology},
  volume    = {98},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  number    = {5-8},
  publisher = {Springer},
  address   = {London},
  issn      = {0268-3768},
  doi       = {10.1007/s00170-018-2040-8},
  pages     = {1409 -- 1431},
  year      = {2018},
  abstract  = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.},
  language  = {en}
}
@article{Alt1982,
  author    = {Alt, Helmut},
  title     = {Statische oder dynamische Wirtschaftlichkeitsberechnung bei Investitionen zur Energieeinsparung},
  series = {Elektrow{\"a}rme international Edition B: Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschrift f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  volume    = {Jg. 40},
  journal   = {Elektrow{\"a}rme international Edition B: Industrielle Elektrow{\"a}rme : IEW = Industrial applications of electro-heat : EWI ; Zeitschrift f{\"u}r das gesamte Gebiet der Elektrow{\"a}rme in Industrie, Gewerbe und Haushalt},
  number    = {H. 3/4},
  issn      = {0340-3521},
  pages     = {166 -- 172},
  year      = {1982},
  language  = {de}
}
@article{MuellerVeggianGonoLieder1976,
  author    = {M{\"u}ller-Veggian, Mattea and Gono, Y. and Lieder, R. M.},
  title     = {Stati isomerici nei nuclei ¹⁸⁹,¹⁹¹,¹⁹³ Au},
  series = {Bollettino della Societ{\`a} Italiana di Fisica},
  volume    = {1976},
  journal   = {Bollettino della Societ{\`a} Italiana di Fisica},
  publisher = {Zanichelli},
  address   = {Bologna},
  isbn      = {0037-8801},
  pages     = {56},
  year      = {1976},
  language  = {de}
}
@article{LehnertzMormannOsterhageetal.2007,
  author    = {Lehnertz, Klaus and Mormann, Florian and Osterhage, Hannes and M{\"u}ller, Andy and Prusseit, Jens and Chernihovskyi, Anton and Staniek, Matth{\"a}us and Krug, Dieter and Bialonski, Stephan and Elger, Christian E.},
  title     = {State-of-the-art of seizure prediction},
  series = {Journal of Clinical Neurophysiology},
  volume    = {24},
  journal   = {Journal of Clinical Neurophysiology},
  number    = {2},
  issn      = {1537-1603},
  doi       = {10.1097/WNP.0b013e3180336f16},
  pages     = {147 -- 153},
  year      = {2007},
  language  = {en}
}
@article{HorstmannBialonskiNoenningetal.2010,
  author    = {Horstmann, Marie-Therese and Bialonski, Stephan and Noenning, Nina and Mai, Heinke and Prusseit, Jens and Wellmer, J{\"o}rg and Hinrichs, Hermann and Lehnertz, Klaus},
  title     = {State dependent properties of epileptic brain networks: Comparative graph-theoretical analyses of simultaneously recorded EEG and MEG},
  series = {Clinical Neurophysiology},
  volume    = {121},
  journal   = {Clinical Neurophysiology},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1388-2457},
  doi       = {10.1016/j.clinph.2009.10.013},
  pages     = {172 -- 185},
  year      = {2010},
  abstract  = {Objective To investigate whether functional brain networks of epilepsy patients treated with antiepileptic medication differ from networks of healthy controls even during the seizure-free interval. Methods We applied different rules to construct binary and weighted networks from EEG and MEG data recorded under a resting-state eyes-open and eyes-closed condition from 21 epilepsy patients and 23 healthy controls. The average shortest path length and the clustering coefficient served as global statistical network characteristics. Results Independent on the behavioral condition, epileptic brains exhibited a more regular functional network structure. Similarly, the eyes-closed condition was characterized by a more regular functional network structure in both groups. The amount of network reorganization due to behavioral state changes was similar in both groups. Consistent findings could be achieved for networks derived from EEG but hardly from MEG recordings, and network construction rules had a rather strong impact on our findings. Conclusions Despite the locality of the investigated processes epileptic brain networks differ in their global characteristics from non-epileptic brain networks. Further methodological developments are necessary to improve the characterization of disturbed and normal functional networks. Significance An increased regularity and a diminished modulation capability appear characteristic of epileptic brain networks.},
  language  = {en}
}
@article{SchaeferRessSpahnetal.1998,
  author    = {Sch{\"a}fer, Horst and Ress, H. R. and Spahn, W. and Ebel, R. (u.a.)},
  title     = {Start of misfit relaxation in GaAs-ZnSe heterostructures},
  series = {Journal of Crystal Growth. 184-185 (1998)},
  journal   = {Journal of Crystal Growth. 184-185 (1998)},
  isbn      = {0022-0248},
  pages     = {90 -- 94},
  year      = {1998},
  language  = {en}
}
@book{Knepper2000,
  author    = {Knepper, Ludger},
  title     = {Staplereinsatzkonzept Rohstofflagerplatz einer Papierfabrik},
  address   = {FH Aachen},
  year      = {2000},
  language  = {de}
}
@book{KetternGruenebaumFrechen1987,
  author    = {Kettern, J{\"u}rgen and Gr{\"u}nebaum, Thomas and Frechen, Franz-Bernd},
  title     = {Standzeituntersuchungen an Kompostfiltern und Ausarbeitung von Bau- und Betriebsanleitungen f{\"u}r Erd- und Kompostfilter im Bereich von Kl{\"a}ranlagen : Abschlußbericht {\"u}ber erg{\"a}nzende Untersuchungen / Thomas Gr{\"u}nebaum; J{\"u}rgen T. Kettern; Franz-Bernd Frechen.},
  address   = {Aachen},
  pages     = {ca 180 S.},
  year      = {1987},
  language  = {de}
}
@article{VerschitzButenweg2014,
  author    = {Verschitz, Daniel and Butenweg, Christoph},
  title     = {Standsicherheitsnachweis von Beh{\"a}ltern f{\"u}r Kleinkl{\"a}ranlagen},
  series = {ACWA aktuell},
  journal   = {ACWA aktuell},
  number    = {12 - 9/2014},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  pages     = {10},
  year      = {2014},
  abstract  = {Die PIA GmbH pr{\"u}ft seit fast 8 Jahren die Standsicherheit von Beh{\"a}ltern f{\"u}r Kleinkl{\"a}ranlagen. Diese bestehen in der Regel aus Kunststoff oder Beton und m{\"u}ssen {\"u}ber ihre gesamte Lebensdauer den Beanspruchungen aus Handhabung, Einbau und Betrieb standhalten. Die Standsicherheit kann nach EN 12566 wahlweise durch einen rechnerischen Nachweis oder durch einen praktischen Nachweis wie die Bruchlastpr{\"u}fung oder die Pr{\"u}fung in der Grube erfolgen.},
  language  = {de}
}
@article{HartungNohBaccichetetal.2009,
  author    = {Hartung, Frank and Noh, Jeonghun and Baccichet, Pierpaolo and Mavlankar, Aditya},
  title     = {Standford Peer-to-Peer Mulicast (SPPM) - Overview and recent Extensions / Noh, Jeonghun ; Baccichet, Pierpaolo ; Hartung, Frank ; Mavlankar, Aditya ; Girod, Bernd},
  isbn      = {978-1-4244-4593-6},
  pages     = {1 -- 4},
  year      = {2009},
  language  = {en}
}
@incollection{MoorkampPetersonUibel2023,
  author    = {Moorkamp, Wilfried and Peterson, Leif Arne and Uibel, Thomas},
  title     = {Standardholzbr{\"u}cken f{\"u}r kommunale Geh- und Radwege},
  series = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  booktitle = {Strukturen, Formen und Prinzipien : Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Martin Trautz},
  editor    = {Wehren, Cedric},
  publisher = {RWTH Aachen},
  address   = {Aachen},
  isbn      = {978-3-95886-500-6},
  pages     = {140 -- 165},
  year      = {2023},
  language  = {de}
}
@inproceedings{BedburThullMoorkampetal.2019,
  author    = {Bedbur, Christian and Thull, J. and Moorkamp, Wilfried and Uibel, Thomas},
  title     = {Standardbr{\"u}cken f{\"u}r Geh- und Radwege},
  series = {Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen},
  booktitle = {Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen},
  publisher = {FH Aachen},
  address   = {Aachen},
  issn      = {2197-4489},
  pages     = {34 -- 45},
  year      = {2019},
  language  = {de}
}
@inproceedings{SchwarzerSchwarzer2009,
  author    = {Schwarzer, Klemens and Schwarzer, Tarik},
  title     = {Stand und Entwicklung der Meerwasserentsalzung},
  series = {Neue Herausforderungen und Chancen in der Wasserversorgung : Seminar des Fachgebiets Wasserversorgung und Grundwasserschutz im Rahmen des 1. Darmst{\"a}dter Ingenieurkongresses Bau und Umwelt am 14. und 15.09.2009. Schriftenreihe WAR. 205},
  booktitle = {Neue Herausforderungen und Chancen in der Wasserversorgung : Seminar des Fachgebiets Wasserversorgung und Grundwasserschutz im Rahmen des 1. Darmst{\"a}dter Ingenieurkongresses Bau und Umwelt am 14. und 15.09.2009. Schriftenreihe WAR. 205},
  publisher = {Inst. WAR},
  address   = {Darmstadt},
  isbn      = {978-3-940897-01-5},
  pages     = {99 -- 120},
  year      = {2009},
  language  = {de}
}
@article{StarkeDrews1984,
  author    = {Starke, G{\"u}nther and Drews, P.},
  title     = {Stand der Sensorentwicklung fuer Schutzgasschweissroboter},
  series = {Schweissen und Schneiden. 36 (1984), H. 4},
  journal   = {Schweissen und Schneiden. 36 (1984), H. 4},
  isbn      = {0036-7184},
  pages     = {166 -- 172},
  year      = {1984},
  language  = {de}
}
@article{AnikAnik1991,
  author    = {Anik, Sabri and Anik, Salahaddin},
  title     = {Stand der Schweißtechnik in der T{\"u}rkei},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {43},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {3},
  issn      = {0036-7184},
  pages     = {142 -- 145},
  year      = {1991},
  language  = {de}
}
@inproceedings{ScheibeKern2013,
  author    = {Scheibe, K. and Kern, Alexander},
  title     = {Stand der Normung f{\"u}r {\"U}berspannungsschutzger{\"a}te},
  series = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)},
  booktitle = {10. VDE, VBB-Blitzschutztagung : Vortr{\"a}ge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)},
  publisher = {VDE-Verl.},
  address   = {Berlin},
  organization    = {Blitzschutztagung <10, 2013, Neu-Ulm>},
  isbn      = {978-3-8007-3540-2},
  pages     = {23 -- 27},
  year      = {2013},
  language  = {de}
}
@inproceedings{SeilerGeorgePfaffetal.2005,
  author    = {Seiler, Friedrich and George, Alfred and Pfaff, Raphael and Srulijes, Julio},
  title     = {Stand der Entwicklung des ISL Dopplerbildverfahrens},
  series = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  booktitle = {GALA : 13. Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik : 6. - 8. September 2005, Cottbus},
  publisher = {Techn. Univ.},
  address   = {Cottbus},
  organization    = {Fachtagung Lasermethoden in der Str{\"o}mungsmesstechnik <13, 2005, Cottbus>},
  isbn      = {3-9805613-2-1},
  pages     = {24-1 -- 24-8},
  year      = {2005},
  language  = {de}
}
@article{HaissigDoerenWilmes1981,
  author    = {Haissig, Manfred and D{\"o}ren, Horst-Peter and Wilmes, S.},
  title     = {Stand der Entwicklung des Horizontal-Stranggießens von Edelstahl bei der B{\"o}hler AG},
  series = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  journal   = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  issn      = {0340-4803},
  pages     = {383 -- 390},
  year      = {1981},
  language  = {de}
}
@inproceedings{Alt2000,
  author    = {Alt, Helmut},
  title     = {Stand der Durchleitungspraxis auf Basis des neuen Energiewirtschaftsgesetzes},
  series = {Energie und Umwelt 2000 : Fachkongreß und Ausstellung mit DBU-Statuskolloquium der Deutschen Bundesstiftung Umwelt: In situ-Bodenreaktor-Technologie, 29. bis 30. M{\"a}rz 2000 in Freiberg, Clemens-Winkler-Bau ; Tagungsband},
  booktitle = {Energie und Umwelt 2000 : Fachkongreß und Ausstellung mit DBU-Statuskolloquium der Deutschen Bundesstiftung Umwelt: In situ-Bodenreaktor-Technologie, 29. bis 30. M{\"a}rz 2000 in Freiberg, Clemens-Winkler-Bau ; Tagungsband},
  organization    = {Technische Universit{\"a}t <Freiberg>},
  pages     = {86 -- 88},
  year      = {2000},
  language  = {de}
}
@article{DielmannBockSonnek2007,
  author    = {Dielmann, Klaus-Peter and Bock, Alexis and Sonnek, Frederic},
  title     = {Stand der CO2-Allokationspl{\"a}ne in Europa und Durchsetzung der Monitoring-Richtlinien},
  series = {VGB PowerTech : international journal for electricity and heat generation},
  volume    = {87},
  journal   = {VGB PowerTech : international journal for electricity and heat generation},
  number    = {3},
  isbn      = {1435-3199},
  pages     = {40 -- 46},
  year      = {2007},
  language  = {de}
}
@article{BreitbachNickelSchubert1990,
  author    = {Breitbach, Gerd and Nickel, H. and Schubert, F.},
  title     = {Stand der Aktivit{\"a}ten zu Regelwerken f{\"u}r heliumgek{\"u}hlte Hochtemperaturreaktoren / H. Nickel ; F. Schubert ; G. Breitbach},
  series = {Atomwirtschaft - Atomtechnik. 35 (1990), H. 2},
  journal   = {Atomwirtschaft - Atomtechnik. 35 (1990), H. 2},
  isbn      = {0004-721x},
  pages     = {74 -- 79},
  year      = {1990},
  language  = {de}
}
@inproceedings{KohlSchmidtsKloeseretal.2021,
  author    = {Kohl, Philipp and Schmidts, Oliver and Kl{\"o}ser, Lars and Werth, Henri and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {STAMP 4 NLP - an agile framework for rapid quality-driven NLP applications development},
  series = {Quality of Information and Communications Technology. QUATIC 2021},
  booktitle = {Quality of Information and Communications Technology. QUATIC 2021},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-85346-4},
  doi       = {10.1007/978-3-030-85347-1_12},
  pages     = {156 -- 166},
  year      = {2021},
  abstract  = {The progress in natural language processing (NLP) research over the last years, offers novel business opportunities for companies, as automated user interaction or improved data analysis. Building sophisticated NLP applications requires dealing with modern machine learning (ML) technologies, which impedes enterprises from establishing successful NLP projects. Our experience in applied NLP research projects shows that the continuous integration of research prototypes in production-like environments with quality assurance builds trust in the software and shows convenience and usefulness regarding the business goal. We introduce STAMP 4 NLP as an iterative and incremental process model for developing NLP applications. With STAMP 4 NLP, we merge software engineering principles with best practices from data science. Instantiating our process model allows efficiently creating prototypes by utilizing templates, conventions, and implementations, enabling developers and data scientists to focus on the business goals. Due to our iterative-incremental approach, businesses can deploy an enhanced version of the prototype to their software environment after every iteration, maximizing potential business value and trust early and avoiding the cost of successful yet never deployed experiments.},
  language  = {en}
}
@article{ButenwegMarinkovićFehlingetal.2018,
  author    = {Butenweg, Christoph and Marinković, Marko and Fehling, Ekkehard and Pfetzing, Thomas},
  title     = {Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk unter kombinierten seismischen Belastungen in und senkrecht zur Wandebene},
  series = {Bauingenieur},
  volume    = {93},
  journal   = {Bauingenieur},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  isbn      = {0005-6650},
  pages     = {2 -- 10},
  year      = {2018},
  language  = {de}
}
@incollection{Vismann2012,
  author    = {Vismann, Ulrich},
  title     = {Stahlbetonbau},
  series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0999-5 ; 978-3-8348-8229-5},
  doi       = {10.1007/978-3-8348-8229-5_9},
  pages     = {223 -- 262},
  year      = {2012},
  language  = {de}
}
@incollection{Vismann2009,
  author    = {Vismann, Ulrich},
  title     = {Stahlbetonbau},
  series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0684-0 ; 978-3-8348-9997-2},
  doi       = {10.1007/978-3-8348-9997-2_9},
  pages     = {203 -- 233},
  year      = {2009},
  language  = {de}
}
@incollection{VismannSchueller2015,
  author    = {Vismann, Ulrich and Sch{\"u}ller, Michael},
  title     = {Stahlbetonbau},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01680-7 ; 978-3-658-01681-4},
  doi       = {10.1007/978-3-658-01681-4_9},
  pages     = {243 -- 322},
  year      = {2015},
  abstract  = {Das Kapitel Stahlbetonbau besteht aus einer Formelsammlung (Teil A) sowie einem Praxisbeispiel (Teil B). In dem Praxisbeispiel werden exemplarisch die erforderlichen Rechenschritte und Nachweise zur Bemessung im GZT und GZG nach Eurocode 2 [1] vorgestellt. Die Hinweise im Text beziehen sich, soweit nicht explizit erw{\"a}hnt, auf Wendehorst, Bautechnische Zahlentafeln, 35. Auflage, „Stahlbeton- und Spannbetonbau nach Eurocode 2" [2]. Die zum Praxisbeispiel zugeh{\"o}rigen Konstruktions- und Bewehrungszeichnungen stehen im Onlineportal zu diesem Buch zum kostenlosen Download bereit (siehe unter www.springer.com).},
  language  = {de}
}
@incollection{Vismann2012,
  author    = {Vismann, Ulrich},
  title     = {Stahlbeton- und Spannbetonbau nach Eurocode 2},
  series = {Wendehorst Bautechnische Zahlentafeln},
  booktitle = {Wendehorst Bautechnische Zahlentafeln},
  editor    = {Vismann, Ulrich},
  edition   = {34},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0960-5},
  doi       = {10.1007/978-3-8348-8613-2_12},
  pages     = {601 -- 775},
  year      = {2012},
  abstract  = {Die bauaufsichtliche Einf{\"u}hrung der Eurocodes steht unmittelbar bevor. F{\"u}r den Bereich des Stahl- und Spannbetonbaus soll die Anwendung zum 1. Juli 2012 verbindlich sein, d. h. mit diesem Stichtag sollte nur noch der Eurocode 2 (DIN EN 1992-1-1, Ausgabe Januar 2011) mit seinem zugeh{\"o}rigen nationalen Anhang (DIN EN 1992-1-1/NA, Ausgabe Januar 2011) Verwendung finden, die DIN 1045-1 wird zur{\"u}ckgezogen. Bereits seit M{\"a}rz 2010 gilt eine {\"U}bergangsphase, ist der die Anwendung des Eurocodes alternativ zur DIN 1045-1 als bauaufsichtlich gleichwertige L{\"o}sung m{\"o}glich.},
  language  = {de}
}
@incollection{Vismann2015,
  author    = {Vismann, Ulrich},
  title     = {Stahlbeton und Spannbeton nach Eurocode 2},
  series = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  booktitle = {Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01689-0_12},
  pages     = {497 -- 655},
  year      = {2015},
  language  = {de}
}
@book{Lohse2000,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau. Thiele, Albrecht [Hrsg.], Lohse, Wolfram [Bearb.] Bd. 2. 19., {\"u}berarb. Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-15255-X},
  pages     = {378 S. : graph. Darst.},
  year      = {2000},
  language  = {de}
}
@book{Lohse2002,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau. Bd. 1 : Mit 66 Tafeln und 71 Beispielen. 24., {\"u}berarb. und akt. Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-25254-6},
  pages     = {348 S. : graph. Darst.},
  year      = {2002},
  language  = {de}
}
@book{Lohse2005,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau. Bd. 2 : Mit 75 Tabellen und 43 Beispielen. 20., aktualisierte und erw. Aufl.},
  publisher = {Teubner},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-25255-4},
  pages     = {XI, 408 S. : zahlr. graph. Darst.},
  year      = {2005},
  language  = {de}
}
@book{LohseLaumannWolf2016,
  author    = {Lohse, Wolfram and Laumann, J{\"o}rg and Wolf, Christian},
  title     = {Stahlbau, 1: Bemessung von Stahlbauten nach Eurocode mit zahlreichen Beispielen},
  edition   = {25., {\"u}berarbeitete und aktualisierte Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0867-7},
  doi       = {10.1007/978-3-8348-2058-7},
  pages     = {XIII, 572 Seiten},
  year      = {2016},
  language  = {de}
}
@book{LohseLaumannWolf2020,
  author    = {Lohse, Wolfram and Laumann, J{\"o}rg and Wolf, Christian},
  title     = {Stahlbau 2},
  edition   = {21., vollst. akt. und {\"u}berarb. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-2116-4},
  doi       = {10.1007/978-3-8348-2116-4},
  year      = {2020},
  language  = {de}
}
@book{LaumannWolf2024,
  author    = {Laumann, J{\"o}rg and Wolf, Christian},
  title     = {Stahlbau 1 : Bemessung von Stahlbauten nach Eurocode mit zahlreichen Beispielen},
  edition   = {26., {\"u}berarbeitete und aktualisierte Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41323-1 (Print)},
  doi       = {10.1007/978-3-658-41324-8},
  pages     = {XVI, 661 Seiten},
  year      = {2024},
  language  = {de}
}
@incollection{StroetmannLohse2012,
  author    = {Stroetmann, Richard and Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 4. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0999-5 ; 978-3-8348-8229-5},
  doi       = {10.1007/978-3-8348-8229-5_10},
  pages     = {263 -- 361},
  year      = {2012},
  language  = {de}
}
@incollection{StroetmannLohse2015,
  author    = {Stroetmann, Richard and Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst bautechnische Zahlentafeln / 35. Auflage},
  booktitle = {Wendehorst bautechnische Zahlentafeln / 35. Auflage},
  editor    = {Vismann, Ulrich},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01689-0_13},
  pages     = {657 -- 859},
  year      = {2015},
  abstract  = {Es ist zwischen St{\"a}hlen bis S460 und solchen mit h{\"o}herer Streckgrenze zu unterscheiden. St{\"a}hle bis S460 sind auch f{\"u}r die plastische Tragwerksberechnung nach dem Fließgelenkverfahren zugelassen. Bei St{\"a}hlen oberhalb S460 bis S700 ist neben der elastischen eine nichtlineare plastische Tragwerksberechnung unter Ber{\"u}cksichtigung von Teilplastizierungen von Bauteilen in Fließzonen m{\"o}glich.},
  language  = {de}
}
@incollection{StroetmannLohse2015,
  author    = {Stroetmann, Richard and Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. / 5. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-01689-0 ; 978-3-410-24199-7},
  doi       = {10.1007/978-3-658-01681-4_10},
  pages     = {323 -- 431},
  year      = {2015},
  language  = {de}
}
@article{Lohse2007,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].},
  journal   = {Wendehorst Beispiele aus der Baupraxis / Wetzell, Otto W. ; Baumgartner, Herwig ; Wendehorst, Reinhard [Hrsg.].},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8351-0069-5},
  pages     = {129 -- 167},
  year      = {2007},
  language  = {de}
}
@article{Lohse2004,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Bautechnische Zahlentafeln : [jetzt mit neuer DIN 1052, DIN1053-1 und DIN 1054] / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berb. und aktualisierte Aufl.},
  journal   = {Bautechnische Zahlentafeln : [jetzt mit neuer DIN 1052, DIN1053-1 und DIN 1054] / Wendehorst. Hrsg. von Otto W. Wetzell. Bearb. von: Herwig Baumgartner ... 31., vollst. {\"u}berb. und aktualisierte Aufl.},
  publisher = {Teubner [u.a.]},
  address   = {Stuttgart [u.a.]},
  isbn      = {3-519-55002-4},
  pages     = {603 -- 738},
  year      = {2004},
  language  = {de}
}
@incollection{Lohse2009,
  author    = {Lohse, Wolfram},
  title     = {Stahlbau},
  series = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.},
  booktitle = {Wendehorst Beispiele aus der Baupraxis. - 3. Aufl.},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0684-0 ; 978-3-8348-9997-2},
  doi       = {10.1007/978-3-8348-9997-2_10},
  pages     = {235 -- 274},
  year      = {2009},
  language  = {de}
}
@incollection{LohseStroetmann2012,
  author    = {Lohse, Wolfram and Stroetmann, Richard},
  title     = {Stahlbau},
  series = {Wendehorst Bautechnische Zahlentafeln},
  booktitle = {Wendehorst Bautechnische Zahlentafeln},
  editor    = {Vismann, Ulrich},
  edition   = {34},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-0960-5},
  doi       = {10.1007/978-3-8348-8613-2_13},
  pages     = {777 -- 1019},
  year      = {2012},
  language  = {de}
}