@inproceedings{BlassUibel2006, author = {Blaß, Hans Joachim and Uibel, Thomas}, title = {Forschung an der Universit{\"a}t Karlsruhe - Stiftf{\"o}rmige Verbindungsmittel in Brettsperrholz}, series = {Brettsperrholz : ein Blick auf Forschung und Entwicklung ; 5. Grazer Holzbau-Fachtagung ; 5. GraHFT' 06; Tagungsband ; Graz, am 29. September 2006 / Institut f{\"u}r Holzbau und Holztechnologie ... [Tagungsband: Thomas Moosbrugger ...]}, booktitle = {Brettsperrholz : ein Blick auf Forschung und Entwicklung ; 5. Grazer Holzbau-Fachtagung ; 5. GraHFT' 06; Tagungsband ; Graz, am 29. September 2006 / Institut f{\"u}r Holzbau und Holztechnologie ... [Tagungsband: Thomas Moosbrugger ...]}, editor = {Moosbrugger, Thomas}, isbn = {3-902020-32-6}, pages = {I-6 -- I-16}, year = {2006}, language = {de} } @inproceedings{ReimerBraunBallmann2006, author = {Reimer, Lars and Braun, Carsten and Ballmann, Josef}, title = {Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation}, series = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences}, booktitle = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences}, publisher = {Optimage}, address = {Edinburgh}, organization = {International Council of the Aeronautical Sciences (ICAS)}, isbn = {0-9533991-7-6}, pages = {Paper No. 2006-10.3.3}, year = {2006}, language = {en} } @inproceedings{BallmannDafnisBraunetal.2006, author = {Ballmann, Josef and Dafnis, Athanasios and Braun, Carsten and Korsch, Helge and Reimerdes, Hans-G{\"u}nther and Braun, Carsten and Ballmann, Josef}, title = {The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW)}, series = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences}, booktitle = {ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences}, publisher = {Optimage}, address = {Edinburgh}, organization = {International Council of the Aeronautical Sciences (ICAS)}, isbn = {0-9533991-7-6}, pages = {Paper No. 2006-5.11.2}, year = {2006}, language = {en} } @inproceedings{KorschDafnisReimerdesetal.2006, author = {Korsch, Helge and Dafnis, Athanasios and Reimerdes, Hans-G{\"u}nther and Braun, Carsten and Ballmann, Josef}, title = {Dynamic qualification of the HIRENASD elastic wing model}, series = {Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt. 2006}, booktitle = {Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt. 2006}, publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth (DGLR)}, address = {Bonn}, pages = {1441 -- 1450}, year = {2006}, language = {en} } @inproceedings{MuellerFischerLehmann2006, author = {M{\"u}ller, Karsten and Fischer, Benedikt and Lehmann, Thomas}, title = {Einsatzm{\"o}glichkeiten von Bilderkennungsverfahren zur Zustandserfassung von Kanalisationen}, series = {7. K{\"o}lner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, K{\"o}ln / hrsg. von J. Pinnekamp. Aachener Schriften zur Stadtentw{\"a}sserung. Bd. 9}, booktitle = {7. K{\"o}lner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, K{\"o}ln / hrsg. von J. Pinnekamp. Aachener Schriften zur Stadtentw{\"a}sserung. Bd. 9}, publisher = {Ges. zur F{\"o}rderung der Siedlungswasserwirtschaft an der RWTH Aachen}, address = {Aachen}, isbn = {3-938996-02-1}, pages = {16/1 -- 16/18}, year = {2006}, language = {de} } @inproceedings{PinnekampMueller2006, author = {Pinnekamp, Johannes and M{\"u}ller, Karsten}, title = {Kanalisation und Gew{\"a}sserschutz}, series = {7. K{\"o}lner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, K{\"o}ln / hrsg. von Johannes Pinnekamp. Aachener Schriften zur Stadtentw{\"a}sserung. Bd. 9}, booktitle = {7. K{\"o}lner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, K{\"o}ln / hrsg. von Johannes Pinnekamp. Aachener Schriften zur Stadtentw{\"a}sserung. Bd. 9}, publisher = {Ges. zur F{\"o}rderung der Siedlungswasserwirtschaft an der RWTH Aachen}, address = {Aachen}, isbn = {3-938996-02-1}, pages = {1/1 -- 1/16}, year = {2006}, language = {de} } @inproceedings{Schwarzer2006, author = {Schwarzer, Klemens}, title = {Solarthermisches Entsalzungssystem mit W{\"a}rmer{\"u}ckgewinnung - Erste Feldtestergebnisse}, series = {16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein}, booktitle = {16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein}, publisher = {Ostbayer. Technologie-Transfer-Inst.}, address = {Regensburg}, isbn = {3-934681-45-X}, pages = {173 -- 178}, year = {2006}, language = {de} } @inproceedings{RaupachOrlowskyBuettneretal.2006, author = {Raupach, Michael and Orlowsky, Jeannette and B{\"u}ttner, T. and Dilthey, Ulrich and Schleser, Markus}, title = {Epoxy-impregnated textiles in concrete - load bearing capacity and durability}, series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, editor = {Hegger, Josef}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>}, isbn = {2-912143-97-7}, pages = {77 -- 88}, year = {2006}, language = {en} } @inproceedings{PakPiegelerFeldmannetal.2006, author = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich}, title = {Hybrid joints of textile reinforced concrete parts - designed for assembly}, series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, editor = {Hegger, Josef}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>}, isbn = {2-912143-97-7}, pages = {181 -- 190}, year = {2006}, language = {en} } @inproceedings{DiltheySchleser2006, author = {Dilthey, Ulrich and Schleser, Markus}, title = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles}, series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal}, booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal}, editor = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel}, publisher = {Universidade do Minho, Departamento de Engenharia Civil}, address = {Guimar{\~a}es}, organization = {International Symposium in Concrete <2006, Guimar{\~a}es)}, isbn = {972-99179-1-4}, pages = {185 -- 192}, year = {2006}, language = {en} } @inproceedings{FendHoffschmidtReutteretal.2006, author = {Fend, Thomas and Hoffschmidt, Bernhard and Reutter, Oliver and Sauerhering, J{\"o}rg and Pitz-Paal, Robert}, title = {Gas flow in hot porous materials: the solar air receiver and spin-off applications}, series = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland}, booktitle = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland}, publisher = {ASME}, address = {New York, NY}, organization = {International Conference on Nanochannels, Microchannels and Minichannels <4, 2006, Limerick>}, isbn = {0-7918-4760-8}, pages = {507 -- 514}, year = {2006}, language = {en} } @inproceedings{HoffschmidtSchwarzerSpaeteetal.2006, author = {Hoffschmidt, Bernhard and Schwarzer, Klemens and Sp{\"a}te, Frank and K{\"o}tter, Jens and Ebert, Miriam and Sierck, Olaf}, title = {Development of a small modular parabolic trough collector}, series = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain}, booktitle = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain}, publisher = {SolarPaces}, address = {[o.O.]}, organization = {International Symposium on Concentrating Solar Power and Chemical Energy Systems <13, 2006, Sevilla>}, isbn = {8478345191}, pages = {1 CD-ROM}, year = {2006}, language = {en} } @inproceedings{DiltheySchleserMoelleretal.2006, author = {Dilthey, Ulrich and Schleser, Markus and M{\"o}ller, M. and Weichhold, O.}, title = {Application of polymers in textile reinforced concrete : from the interface to construction elements}, series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)}, editor = {Hegger, Josef}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>}, isbn = {2-912143-97-7}, pages = {55 -- 64}, year = {2006}, language = {en} } @inproceedings{HellmannsBoehmDilger2006, author = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus}, title = {Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control}, series = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida}, booktitle = {Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida}, publisher = {Adhesion Society}, address = {Blacksburg, Va.}, organization = {Adhesion Society}, issn = {1086-9506}, pages = {68 -- 70}, year = {2006}, language = {en} } @inproceedings{HellmannsBoehmDilgeretal.2006, author = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus and Welters, T.}, title = {Neue M{\"o}glichkeiten der Klebstoffverarbeitung durch geschwindigkeitsproportionalen Handauftrag}, series = {Adhesive bonding and hybrid bonding in body-in-white shop and assembly : proceedings, 25/26 April 2006, Bad Nauheim/Frankfurt}, booktitle = {Adhesive bonding and hybrid bonding in body-in-white shop and assembly : proceedings, 25/26 April 2006, Bad Nauheim/Frankfurt}, publisher = {Technik \& Kommunikation Verl.-GmbH}, address = {Berlin}, pages = {81}, year = {2006}, language = {de} } @inproceedings{HellmannsBoehmDilger2006, author = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus}, title = {Progress of the manual application of adhesives}, series = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China}, booktitle = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China}, publisher = {Beijing Adhesion Society of China}, address = {Beijing}, pages = {275 -- 277}, year = {2006}, language = {en} } @inproceedings{BoehmHellmannsBackesetal.2006, author = {B{\"o}hm, Stefan and Hellmanns, Mark and Backes, Andreas and Dilger, Klaus}, title = {Lock-in thermography based NDT of automotive parts}, series = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China}, booktitle = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China}, publisher = {Beijing Adhesion Society of China}, address = {Beijing}, pages = {382 -- 384}, year = {2006}, language = {en} } @inproceedings{FerreinLakemeyerSchiffer2006, author = {Ferrein, Alexander and Lakemeyer, Gerhard and Schiffer, Stefan}, title = {AllemaniACs@ home 2006 team description}, pages = {1 -- 6}, year = {2006}, language = {en} } @inproceedings{AugensteinHerbergsKuperjans2006, author = {Augenstein, Eckardt and Herbergs, S. and Kuperjans, Isabel}, title = {Planung und Bewertung der Geb{\"a}udeenergieversorgung mit TOP-Energy}, series = {Heizungs- und Raumlufttechnik : 1. Fachtagung Leonberg, 31. Januar bis 1. Februar 2006. - (VDI-Berichte ; Nr. 1921)}, booktitle = {Heizungs- und Raumlufttechnik : 1. Fachtagung Leonberg, 31. Januar bis 1. Februar 2006. - (VDI-Berichte ; Nr. 1921)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091921-3}, pages = {57 -- 60}, year = {2006}, language = {de} } @inproceedings{PauksztatKuperjansdeHesselle2006, author = {Pauksztat, Anja and Kuperjans, Isabel and de Hesselle, M.}, title = {Referenzformeln f{\"u}r Energiebedarf und CO2-Emissionen in der Glasindustrie}, series = {Energieeffizienz - Chancen f{\"u}r die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)}, booktitle = {Energieeffizienz - Chancen f{\"u}r die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)}, edition = {Nichtred. Ms.-Dr.}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091951-5}, pages = {179 -- 190}, year = {2006}, language = {de} } @inproceedings{PfaffVinsonneauBurnham2006, author = {Pfaff, Raphael and Vinsonneau, B. and Burnham, K. J.}, title = {Multiple models for nonlinear systems}, series = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]}, booktitle = {Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]}, organization = {International Conference on Systems Engineering <18, 2006, Coventry>}, isbn = {1-84600-013-0}, pages = {347 -- 352}, year = {2006}, language = {en} } @inproceedings{NaetherPoghossianPlatenetal.2006, author = {N{\"a}ther, Niko and Poghossian, Arshak and Platen, J. and Yoshinobu, T. and Koudelka-Hep, M. and Sch{\"o}ning, Michael Josef}, title = {Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle}, series = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...}, booktitle = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...}, address = {Warsaw}, pages = {172 -- 181}, year = {2006}, language = {en} } @inproceedings{KloockSchubertErmelenkoetal.2006, author = {Kloock, Joachim P. and Schubert, J. and Ermelenko, Y. and Vlasov, Y. G. and Bratov, A. and Sch{\"o}ning, Michael Josef}, title = {Thin-film sensors with chalcogenide glass materials - a general survey}, series = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...}, booktitle = {Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...}, address = {Warsaw}, pages = {92 -- 97}, year = {2006}, language = {en} } @inproceedings{SchoeningAbouzarWagneretal.2006, author = {Sch{\"o}ning, Michael Josef and Abouzar, Maryam H. and Wagner, Torsten and N{\"a}ther, Niko and Rolka, David and Yoshinobu, Tatsuo and Kloock, Joachim P. and Turek, Monika and Ingebrandt, Sven and Poghossian, Arshak}, title = {A semiconductor-based field-effect platform for (bio-)chemical and physical sensors: From capacitive EIS sensors and LAPS over ISFETs to nano-scale devices}, series = {MRS Proceedings}, booktitle = {MRS Proceedings}, doi = {10.1557/PROC-0952-F08-02}, pages = {1 -- 9}, year = {2006}, language = {en} } @inproceedings{SchoeningAbouzarHanetal.2006, author = {Sch{\"o}ning, Michael Josef and Abouzar, Maryam H. and Han, Y. and Ingebrandt, S. and Offenh{\"a}usser, A. and Poghossian, Arshak}, title = {Markierungsfreie DNA-Detektion mit Silizium-Feldeffektsensoren - Messeffekte oder Artefakte?}, series = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau}, booktitle = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau}, publisher = {VDE Verl.}, address = {Berlin}, isbn = {3-8007-2939-3}, pages = {443 -- 446}, year = {2006}, language = {de} } @inproceedings{PlatenPoghossianSchoening2006, author = {Platen, J. and Poghossian, Arshak and Sch{\"o}ning, Michael Josef}, title = {Pr{\"a}paration von selbstjustierenden Nanostrukturen mittels Schichtausdehnungstechnik}, series = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau}, booktitle = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau}, publisher = {VDE Verl.}, address = {Berlin}, isbn = {3-8007-2939-3}, pages = {277 -- 280}, year = {2006}, language = {de} } @inproceedings{WagnerYoshinobuOttoetal.2006, author = {Wagner, Torsten and Yoshinobu, T. and Otto, R. and Rao, C. and Molina, R. and Sch{\"o}ning, Michael Josef}, title = {Licht-adressierbare potentiometrische Sensorsysteme - Konzepte und Anwendungen}, series = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau}, booktitle = {Sensoren und Mess-Systeme 2006 : Vortr{\"a}ge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau}, publisher = {VDE Verl.}, address = {Berlin}, isbn = {3-8007-2939-3}, pages = {165 -- 168}, year = {2006}, language = {de} } @inproceedings{Wollert2006, author = {Wollert, J{\"o}rg}, title = {Langzeitstatistische Untersuchungen zur Qualit{\"a}t von Funkkan{\"a}len f{\"u}r das industrielle Umfeld}, series = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, booktitle = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-377210-8}, pages = {165 -- 176}, year = {2006}, language = {de} } @inproceedings{Wollert2006, author = {Wollert, J{\"o}rg}, title = {Grundlagen Wireless - Was kann von Funktechnik erwartet werden?}, series = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, booktitle = {Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / J{\"o}rg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-377210-8}, pages = {314 -- 323}, year = {2006}, language = {de} } @inproceedings{MorenoDosevBratovetal.2006, author = {Moreno, Lia and Dosev, D. and Bratov, A. and Dominguez, C. and Sch{\"o}ning, Michael Josef and Kloock, Joachim P.}, title = {Effect of electrical properties of the surrounding medium on the response of an interdigitated electrode array with chalcogenide glass film}, series = {XX Eurosensors : 20th anniversary ; G{\"o}teborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1}, booktitle = {XX Eurosensors : 20th anniversary ; G{\"o}teborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1}, address = {G{\"o}teborg}, isbn = {978-91-631-9280-7}, pages = {384 -- 385}, year = {2006}, language = {en} } @inproceedings{VedralWollertBudaetal.2006, author = {Vedral, Andreas and Wollert, J{\"o}rg and Buda, A. and Altrock, R.}, title = {The capability of bluetooth for real-time transmission in automation}, series = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand}, booktitle = {Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand}, publisher = {Acta Pr.}, address = {Anaheim, Calif.}, organization = {International Association of Science and Technology for Development}, pages = {168 -- 175}, year = {2006}, language = {en} } @inproceedings{VedralWollert2006, author = {Vedral, A. and Wollert, J{\"o}rg}, title = {Analysis of error and time behavior of the IEEE 802.15.4 PHY-layer in an industrial environment}, series = {Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006}, booktitle = {Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, organization = {International Workshop on Factory Communication Systems <2006, Torino>}, isbn = {1-4244-0379-0}, pages = {119 -- 124}, year = {2006}, language = {de} } @inproceedings{VredalWollert2006, author = {Vredal, Andreas and Wollert, J{\"o}rg}, title = {Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen}, series = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)}, booktitle = {Wireless Automation : Chancen, L{\"o}sungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {3-18-091939-6}, pages = {135 -- 146}, year = {2006}, language = {de} } @inproceedings{VedralWollert2006, author = {Vedral, Andreas and Wollert, J{\"o}rg}, title = {Die Analyse industrieller funkgest{\"u}tzter Kommunikationskan{\"a}le}, series = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg}, booktitle = {Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse \& Kongress, 28. - 30. Nov. 2006, N{\"u}rnberg}, publisher = {VDE-Verl.}, address = {Berlin}, isbn = {9783800729944}, pages = {279 -- 288}, year = {2006}, language = {de} } @inproceedings{VedralWollert2006, author = {Vedral, Andreas and Wollert, J{\"o}rg}, title = {Praktische Untersuchungen zum zeitlichen {\"U}bertragungs- und B{\"u}ndelfehlerverhalten der IEEE 802.15.4}, series = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen}, booktitle = {ZigBee \& Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, M{\"u}nchen}, publisher = {Design\&Elektronik}, address = {Poing}, organization = {Entwicklerforum ZigBee \& Co. - Drahtlose Nahbereichsnetzwerke <2006, M{\"u}nchen>}, year = {2006}, language = {de} } @inproceedings{HerrmannWorringerGraeteretal.2006, author = {Herrmann, Ulf and Worringer, S. and Graeter, F. and Nava, P.}, title = {Three Years of Operation Experience of the SKAL-ET Collector Loop at SEGS V}, series = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies, June 20 - 23, 2006, Seville, Spain}, booktitle = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies, June 20 - 23, 2006, Seville, Spain}, editor = {Romero, Manuel}, publisher = {SolarPACES [u.a.]}, address = {[s.l.]}, isbn = {84-7834-519-1}, pages = {1 CD-ROM}, year = {2006}, language = {en} } @inproceedings{PietschHerzwurmZander2006, author = {Pietsch, Wolfram and Herzwurm, Georg and Zander, Dietmar}, title = {Assuring quality of QFD-education in Germany}, series = {ISQFD'06: 12th International Symposium on QFD : Tokyo, 07.-09.2006}, booktitle = {ISQFD'06: 12th International Symposium on QFD : Tokyo, 07.-09.2006}, organization = {International Symposium on QFD <12, 2006, Tokyo>}, pages = {1 -- 6}, year = {2006}, language = {en} } @inproceedings{PoghossianIngebrandtPlatenetal.2006, author = {Poghossian, Arshak and Ingebrandt, S. and Platen, J. and Sch{\"o}ning, Michael Josef}, title = {Field-effect sensors with charged macromolecules - from micro towards nano aspects}, series = {Biochemical Sensing Utilisation of Micro-and Nanotechnologies, Warschau, Nov. 2005 : Lecture Notes of the ICB Seminar / ed.: M. Mascini, W. Torbicz}, booktitle = {Biochemical Sensing Utilisation of Micro-and Nanotechnologies, Warschau, Nov. 2005 : Lecture Notes of the ICB Seminar / ed.: M. Mascini, W. Torbicz}, publisher = {Polish Academy Sciences Press}, address = {Warsaw}, pages = {74 -- 81}, year = {2006}, language = {en} } @inproceedings{RenaultButenwegMeskouris2006, author = {Renault, Philippe and Butenweg, Christoph and Meskouris, Konstantin}, title = {Baudynamische Untersuchung von Br{\"u}ckenbauwerken im K{\"o}lner Raum}, series = {Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)}, booktitle = {Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, organization = {VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb}, isbn = {3-18-091941-8}, pages = {121 -- 140}, year = {2006}, language = {de} } @inproceedings{MeskourisMistlerButenweg2006, author = {Meskouris, Konstantin and Mistler, Michael and Butenweg, Christoph}, title = {Mauerwerksbauten unter Erdbebenbelastung}, series = {Numerische Methoden zur Probleml{\"o}sung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006}, booktitle = {Numerische Methoden zur Probleml{\"o}sung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006}, publisher = {IBAC}, address = {Aachen}, organization = {Aachener Baustofftag <34, 2006>}, pages = {Getr. Z{\"a}hlung}, year = {2006}, language = {de} } @inproceedings{KobGoemmelButenwegetal.2006, author = {Kob, Malte and G{\"o}mmel, Andreas and Butenweg, Christoph and Niendorf, Thoralf}, title = {Training of a combined model of larynx and vocal folds with data from MRI measurements}, series = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings}, booktitle = {The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings}, organization = {International Conference on Voice Physiology and Biomechanics <5, 2006, Tokyo>}, pages = {45 -- 46}, year = {2006}, language = {en} } @inproceedings{ButenwegMistler2006, author = {Butenweg, Christoph and Mistler, Michael}, title = {Seismic resistance of unreinforced masonry buildings}, series = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...}, booktitle = {Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...}, publisher = {Civil-Comp Press}, address = {Stirling}, organization = {International Conference on Computational Structures Technology <8, 2006, Las Palmas>}, isbn = {1-905088-06-X}, doi = {10.4203/ccp.83.9}, pages = {Paper 9}, year = {2006}, language = {en} } @inproceedings{DeterdingTippkoetterUlber2006, author = {Deterding, A. and Tippk{\"o}tter, Nils and Ulber, R.}, title = {Online-Essigs{\"a}ureanalytik in Fermentationsbr{\"u}hen mittels Fließdiffusionstechnik (FDT)}, series = {Technische Systeme f{\"u}r Biotechnologie und Umwelt : 13. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 25.09. - 27.09.2006}, booktitle = {Technische Systeme f{\"u}r Biotechnologie und Umwelt : 13. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 25.09. - 27.09.2006}, editor = {Beckmann, Dieter}, address = {Heiligenstadt}, organization = {Institut f{\"u}r Bioprozeß- und Analysenmeßtechnik}, isbn = {978-3-00-018621-9}, pages = {273 -- 280}, year = {2006}, language = {de} } @inproceedings{SchuhGottschalkHoehneetal.2006, author = {Schuh, G. and Gottschalk, S. and H{\"o}hne, Tim and Cloots, M.}, title = {Parametrierung einer Schlupfregelung in der simulativen Produktionsplanung}, series = {Simulation in Produktion und Logistik 2006 : Tagungsband zur 12. Fachtagung, Kassel, 26. - 27. September 2006}, booktitle = {Simulation in Produktion und Logistik 2006 : Tagungsband zur 12. Fachtagung, Kassel, 26. - 27. September 2006}, editor = {Wenzel, Sigrid}, isbn = {3-936150-48-6}, pages = {233 -- 243}, year = {2006}, language = {de} } @inproceedings{DrummLemckeOberle2006, author = {Drumm, Christian and Lemcke, Jens and Oberle, Daniel}, title = {Integrating Semantic Web Services and Business Process Management: A Real Use Case}, series = {Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006}, booktitle = {Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006}, pages = {15 Seiten}, year = {2006}, language = {en} } @inproceedings{LoebSchartnerSeboldtetal.2006, author = {Loeb, Horst W. and Schartner, Karl-Heinz and Seboldt, Wolfgang and Dachwald, Bernd and Streppel, Joern and Meusemann, Hans and Sch{\"u}lke, Peter}, title = {SEP for a lander mission to the jovian moon europa}, series = {57th International Astronautical Congress}, booktitle = {57th International Astronautical Congress}, doi = {10.2514/6.IAC-06-C4.4.04}, pages = {1 -- 12}, year = {2006}, abstract = {Under DLR-contract, Giessen University and DLR Cologne are studying solar-electric propulsion missions (SEP) to the outer regions of the solar system. The most challenging reference mission concerns the transport of a 1.35-tons chemical lander spacecraft into an 80-RJ circular orbit around Jupiter, which would enable to place a 375 kg lander with 50 kg of scientific instruments on the surface of the icy moon "Europa". Thorough analyses show that the best solution in terms of SEP launch mass times thrusting time would be a two-stage EP module and a triple-junction solar array with concentrators which would be deployed step by step. Mission performance optimizations suggest to propel the spacecraft in the first EP stage by 6 gridded ion thrusters, running at 4.0 kV of beam voltage, which would save launch mass, and in the second stage by 4 thrusters with 1.25 to 1.5 kV of positive high voltage saving thrusting time. In this way, the launch mass of the spacecraft would be kept within 5.3 tons. Without a launcher's C3 and interplanetary gravity assists, Jupiter might be reached within about 4 yrs. The spiraling-down into the parking orbit would need another 1.8 yrs. This "large mission" can be scaled down to a smaller one, e.g., by halving all masses, the solar array power, and the number of thrusters. Due to their reliability, long lifetime and easy control, RIT-22 engines have been chosen for mission analysis. Based on precise tests, the thruster performance has been modeled.}, language = {en} } @inproceedings{DachwaldKahleWie2006, author = {Dachwald, Bernd and Kahle, Ralph and Wie, Bong}, title = {Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis}, series = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit}, booktitle = {AIAA/AAS Astrodynamics Specialist Conference and Exhibit}, doi = {10.2514/6.2006-6178}, pages = {1 -- 20}, year = {2006}, abstract = {Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.}, language = {en} } @inproceedings{HuthElsenHartwigetal.2006, author = {Huth, Thomas and Elsen, Olaf and Hartwig, Christoph and Esch, Thomas}, title = {Innovative modular valve trains for 2015 - logistic benefits by EMVT}, series = {IFAC Proceedings Volumes, Volume 39, Issue 3}, booktitle = {IFAC Proceedings Volumes, Volume 39, Issue 3}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.3182/20060517-3-FR-2903.00172}, pages = {315 -- 320}, year = {2006}, abstract = {In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.}, language = {en} } @inproceedings{Ritz2007, author = {Ritz, Thomas}, title = {Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware}, series = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany}, booktitle = {MMS 2007: Mobilit{\"a}t und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany}, editor = {K{\"o}nig-Ries, Brigitta}, publisher = {Ges. f{\"u}r Informatik}, address = {Bonn}, isbn = {978-3-88579-198-0}, pages = {23 -- 35}, year = {2007}, language = {de} } @inproceedings{KowalskiBarteltMcElwaine2007, author = {Kowalski, Julia and Bartelt, Perry and McElwaine, J.}, title = {Two-phase debris flow modeling}, series = {Geophysical Research Abstracts}, booktitle = {Geophysical Research Abstracts}, year = {2007}, language = {en} } @inproceedings{UibelBlass2007, author = {Uibel, Thomas and Blaß, Hans Joachim}, title = {Edge Joints with Dowel Type Fasteners in Cross Laminated Timber}, series = {Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007}, booktitle = {Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007}, issn = {0945-6996}, pages = {1 -- 11}, year = {2007}, language = {en} } @inproceedings{RingbeckHagebeuker2007, author = {Ringbeck, Thorsten and Hagebeuker, Bianca}, title = {A 3D time of flight camera of object detection}, series = {Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1}, booktitle = {Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1}, editor = {Gr{\"u}n, Armin}, publisher = {ETH}, address = {Z{\"u}rich}, isbn = {3-906467-67-8 (Gesamtwerk)}, pages = {1 -- 16}, year = {2007}, language = {en} } @inproceedings{HagebeukerRingbeckFrydlewiczetal.2007, author = {Hagebeuker, Bianca and Ringbeck, Thorsten and Frydlewicz, Paul and Jesorsky, Oliver and S{\"u}nkel, Thomas}, title = {PMD-Sensoren als Schl{\"u}sselkomponenten f{\"u}r die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums}, series = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg}, booktitle = {Begleittexte zum Entwicklerforum KFZ-Elektronik \& FlexRay Solution Day : 15.Mai 2007, Ludwigsburg}, editor = {Grote, Caspar}, publisher = {WEKA-Fachzeitschr.-Verl.}, address = {Poing}, pages = {287 -- 296}, year = {2007}, language = {en} } @inproceedings{ReimerBraunChenetal.2007, author = {Reimer, Lars and Braun, Carsten and Chen, B.-H. and Ballmann, Josef}, title = {Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests}, series = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden}, booktitle = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden}, publisher = {KTH}, address = {Stockholm}, pages = {1 CD-ROM}, year = {2007}, language = {en} } @inproceedings{WellmerChenBraunetal.2007, author = {Wellmer, Georg and Chen, B.-H. and Braun, Carsten and Ballmann, Josef}, title = {Numerical prediction of aeroelastic effects on twin-sting-rig mounted models for rear fuselage and empennage flow investigation in transonic windtunnel}, series = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden}, booktitle = {Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden}, publisher = {KTH}, address = {Stockholm}, organization = {Confederation of European Aerospace Societies ; American Institute of Aeronautics and Astronautics, Reston, Va. ; Kungliga Tekniska H{\"o}gskolan, Stockholm}, pages = {1 CD-ROM}, year = {2007}, language = {en} } @inproceedings{StepkesZimmermannMuelleretal.2007, author = {Stepkes, Hermann and Zimmermann, J. and M{\"u}ller, Karsten and Siekmann, Marko and Pinnekamp, Josef}, title = {Economical rehabilitation of sewer systems by ground penetration radar investigations}, series = {Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do C{\´e}u Almeida}, booktitle = {Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do C{\´e}u Almeida}, publisher = {IWA Publ.}, address = {London}, isbn = {9781843391869}, pages = {501 -- 520}, year = {2007}, language = {en} } @inproceedings{Mueller2007, author = {M{\"u}ller, Karsten}, title = {Strategien zur Zustandserfassung von Kanalisationen}, series = {Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29}, booktitle = {Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29}, publisher = {Inst. f{\"u}r Siedlungs- und Industriewasserwirtschaft}, address = {Dresden}, pages = {39 -- 50}, year = {2007}, language = {de} } @inproceedings{Jacobs2007, author = {Jacobs, Stephan}, title = {Towards integration driven design : experience report}, series = {Software Engineering 2007 : Beitr{\"a}ge zu den Workshops ; Fachtagung des GI-Fachbereichs Softwaretechnik ; 27. - 30.03.2007 in Hamburg. - (GI-Edition : Proceedings ; 106)}, booktitle = {Software Engineering 2007 : Beitr{\"a}ge zu den Workshops ; Fachtagung des GI-Fachbereichs Softwaretechnik ; 27. - 30.03.2007 in Hamburg. - (GI-Edition : Proceedings ; 106)}, editor = {Bleek, Wolf-Gideon}, publisher = {Ges. f{\"u}r Informatik}, address = {Bonn}, isbn = {978-3-88579-200-0}, pages = {143 -- 150}, year = {2007}, language = {en} } @inproceedings{BreitbachAlexopoulosHoffschmidt2007, author = {Breitbach, Gerd and Alexopoulos, Spiros and Hoffschmidt, Bernhard}, title = {Fluid flow in porous ceramic multichannel crossflower filter modules}, publisher = {COMSOL Inc.}, address = {Burlington, Mass.}, pages = {5 S.}, year = {2007}, language = {en} } @inproceedings{DiltheySchleserChudobaetal.2007, author = {Dilthey, Ulrich and Schleser, Markus and Chudoba, Rostislav and Konrad, Martin}, title = {Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics}, series = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007}, booktitle = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007}, editor = {Triantafillou, T. C.}, publisher = {Univ.}, address = {Patras}, organization = {International Symposium on Fibre-Reinforced Polymer Reinforcement for Concrete Structures <8, 2007, Patras>}, isbn = {9608969107}, pages = {456 -- 457}, year = {2007}, language = {en} } @inproceedings{DiltheySchleserHeggeretal.2007, author = {Dilthey, Ulrich and Schleser, Markus and Hegger, Josef and Voss, Stefan}, title = {Load-bearing behaviour of polymer-impregnated textiles in concrete}, series = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)}, booktitle = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)}, editor = {Reinhardt, Hans W.}, publisher = {RILEM Publ.}, address = {Bagneux}, organization = {International Workshop on High Performance Fiber Reinforced Cement Composites <5, 2007, Mainz>}, isbn = {978-2-35158-046-2}, pages = {183 -- 192}, year = {2007}, language = {en} } @inproceedings{KuhnhenneFeldmannDoeringetal.2007, author = {Kuhnhenne, Markus and Feldmann, Markus and D{\"o}ring, Bernd and Spranger, Sascha}, title = {Luftdichtheit im Stahlleichtbau - Geb{\"a}udeh{\"u}llen in Sandwichbauweise}, series = {Dichte Geb{\"a}udeh{\"u}lle, Thermografie und Wohnungsl{\"u}ftung : 2. Europ{\"a}isches BlowerDoor-Symposium : 16.3. - 17.3. 2007, Kassel}, booktitle = {Dichte Geb{\"a}udeh{\"u}lle, Thermografie und Wohnungsl{\"u}ftung : 2. Europ{\"a}isches BlowerDoor-Symposium : 16.3. - 17.3. 2007, Kassel}, publisher = {Energie + Umwelt-Zentrum}, organization = {Europ{\"a}isches BlowerDoor-Symposium <2, 2007, Kassel>}, pages = {121 -- 134}, year = {2007}, language = {de} } @inproceedings{SpasovDoeringGriffin2007, author = {Spasov, Yulian and D{\"o}ring, Bernd and Griffin, Allan}, title = {Exploiting the thermal mass in an energy efficient building - a comparison exercise between IES Apache and TRNSYS models}, series = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings}, booktitle = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings}, address = {Helsinki}, isbn = {978-952-99898-2-9}, pages = {1 -- 7}, year = {2007}, language = {en} } @inproceedings{DoeringFeldmannKuhnhenne2007, author = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus}, title = {An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests}, series = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings}, booktitle = {Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings}, address = {Helsinki}, isbn = {978-952-99898-2-9}, pages = {1 -- 8}, year = {2007}, language = {en} } @inproceedings{BrandesGligorevicSchnelletal.2007, author = {Brandes, Sinja and Gligorevic, Snjezana and Schnell, Michael and Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schlereth, Armin and Rihacek, Christoph}, title = {Final assessment of the B-VHF overlay concept}, series = {IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont.}, booktitle = {IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont.}, organization = {Institute of Electrical and Electronics Engineers}, isbn = {1-4244-0525-4}, pages = {1 -- 18}, year = {2007}, language = {en} } @inproceedings{SajatovicRihacekHaindletal.2007, author = {Sajatovic, Miodrag and Rihacek, Christoph and Haindl, Bernhard and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana}, title = {Broadband VHF (B-VHF) project achievements and follow-on activities}, series = {Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007}, booktitle = {Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007}, organization = {Institute of Electrical and Electronics Engineers}, isbn = {1-4244-1216-1}, pages = {1 -- 8}, year = {2007}, language = {en} } @inproceedings{RokitanskyEhammerGraeupletal.2007, author = {Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana and Rihacek, Christoph and Sajatovic, Miodrag}, title = {B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND}, series = {IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas}, booktitle = {IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas}, organization = {Institute of Electrical and Electronics Engineers}, isbn = {978-1-4244-1108-5}, pages = {4D2-1 -- 4D2-13}, year = {2007}, language = {en} } @inproceedings{RokitanskyEhammerGraeupletal.2007, author = {Rokitansky, Carl-Herbert and Ehammer, Max and Gr{\"a}upl, Thomas and Schnell, Michael and Brandes, Sinja and Gligorevic, Snjezana and Rihacek, Christoph and Sajatovic, Miodrag}, title = {B-AMC - Aeronautical Broadband Communication in the L-Band}, series = {First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2006 ; Bd. 3)}, booktitle = {First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt 2006 ; Bd. 3)}, publisher = {Deutschen Gesellschaft f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, organization = {European Air and Space Conference <1, 2007, Berlin>}, issn = {0070-4083}, pages = {487 -- 496}, year = {2007}, language = {en} } @inproceedings{PfaffPichlerGeorgeetal.2007, author = {Pfaff, Raphael and Pichler, Alexander and George, Alfred and Seiler, Friedrich}, title = {Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007}, series = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620}, booktitle = {PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620}, publisher = {ISL}, address = {Saint Louis, France}, organization = {International Conference on Systems Science <16, 2007, Wroclaw>}, pages = {1 -- 10}, year = {2007}, language = {en} } @inproceedings{KloockSchoening2007, author = {Kloock, Joachim P. and Sch{\"o}ning, Michael Josef}, title = {Heavy metal detection with semiconductor devices based on PLD-prepared chalcogenide glass thin films}, series = {Armenian Journal of Physics}, booktitle = {Armenian Journal of Physics}, issn = {1829-1171}, pages = {95 -- 98}, year = {2007}, language = {en} } @inproceedings{BragardKoellenspergerDeDoncker2007, author = {Bragard, Michael and K{\"o}llensperger, P. and De Doncker, R. W.}, title = {Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit}, series = {"Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne}, booktitle = {"Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne}, editor = {Dmowski, Antoni}, publisher = {APS Energia}, address = {Warszawa}, isbn = {83-918709-7-9}, pages = {7.1 -- 7.9}, year = {2007}, language = {de} } @inproceedings{KoellenspergerBragardPlumetal.2007, author = {K{\"o}llensperger, P. and Bragard, Michael and Plum, T. and De Doncker, R. W.}, title = {The dual GCT : a new high-power device using optimized GCT technology}, series = {Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA}, booktitle = {Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA}, publisher = {IEEE Operations Center}, address = {Piscataway, NJ}, isbn = {978-1-4244-1260-0 (Online)}, doi = {10.1109/07IAS.2007.76}, pages = {358 -- 365}, year = {2007}, language = {en} } @inproceedings{Wollert2007, author = {Wollert, J{\"o}rg}, title = {Mobility - Integration von Offboard-Devices in Fahrzeugen}, series = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, booktitle = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, publisher = {Design \& Elektronik}, address = {Poing}, pages = {47 -- 54}, year = {2007}, language = {de} } @inproceedings{Wollert2007, author = {Wollert, J{\"o}rg}, title = {Fahrzeug-Umwelt Kommunikation? Chancen und Herausforderungen}, series = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, booktitle = {Begleittexte zum Entwicklerforum Kfz-Elektronik \& FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...}, publisher = {Design \& Elektronik}, address = {Poing}, pages = {39 -- 46}, year = {2007}, language = {de} } @inproceedings{VedralKruseWollert2007, author = {Vedral, Andreas and Kruse, Thomas and Wollert, J{\"o}rg}, title = {Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4}, series = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece}, booktitle = {12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Conference on Emerging Technologies and Factory Automation <12, 2007, Patras, Greece>}, isbn = {1424408261 ; 9781424408269}, doi = {10.1109/EFTA.2007.4416769}, pages = {177 -- 186}, year = {2007}, language = {en} } @inproceedings{BudaVredalWollert2007, author = {Buda, Aurel and Vredal, Andreas and Wollert, J{\"o}rg}, title = {Einfache Integration von funkgest{\"u}tzten Kommunikationssystemen in der Automation}, series = {Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung}, booktitle = {Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung}, editor = {Wollert, J{\"o}rg}, publisher = {Aka}, address = {Berlin}, organization = {Wireless-Technologies-Kongress <9, 2007, Stuttgart>}, isbn = {978-3-89838-084-3}, pages = {189 -- 198}, year = {2007}, language = {de} } @inproceedings{BudaJozenfiniWollert2007, author = {Buda, Aurel and Jozenfini, B. and Wollert, J{\"o}rg}, title = {Mobile ad-hoc Network for home automation based on ZigBee application framework}, series = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, booktitle = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, publisher = {Design \& Elektronik}, address = {Poing}, organization = {European ZigBee Developer's Conference <1, 2007, M{\"u}nchen>}, pages = {1 -- 5}, year = {2007}, language = {en} } @inproceedings{KirschBlioumiFellinetal.2007, author = {Kirsch, Ansgar and Blioumi, A. and Fellin, Wolfgang and Kolymbas, Dimitrios}, title = {Modelling anisotropic squeezing as a process in time}, series = {ECCOMAS Thematic Conference on Computational Methods in Tunneling ; August 27 - 29, 2007, Vienna, Austria : EURO:TUN 2007 : proceedings}, booktitle = {ECCOMAS Thematic Conference on Computational Methods in Tunneling ; August 27 - 29, 2007, Vienna, Austria : EURO:TUN 2007 : proceedings}, address = {Wien}, organization = {Thematic Conference on Computational Methods in Tunneling <2007, Wien>}, isbn = {3-9501554-7-3 ; 978-3-9501554-7-1}, pages = {1 CD-ROM}, year = {2007}, language = {en} } @inproceedings{KirschKolymbasFellin2007, author = {Kirsch, Ansgar and Kolymbas, Dimitrios and Fellin, Wolfgang}, title = {Modellierung von druckhaftem anisotropem Fels}, series = {6. {\"O}sterreichische Geotechniktagung : mit "Vienna - Terzaghi Lecture" ; Tagungsbeitr{\"a}ge 18. und 19. J{\"a}nner 2007 / {\"O}sterreichischer Ingenieur- und Architekten-Verein}, booktitle = {6. {\"O}sterreichische Geotechniktagung : mit "Vienna - Terzaghi Lecture" ; Tagungsbeitr{\"a}ge 18. und 19. J{\"a}nner 2007 / {\"O}sterreichischer Ingenieur- und Architekten-Verein}, address = {Wien}, organization = {{\"O}sterreichische Geotechniktagung <6, 2007, Wien>}, isbn = {978-3-902450-58-6}, pages = {487 -- 498}, year = {2007}, language = {de} } @inproceedings{Butenweg2007, author = {Butenweg, Christoph}, title = {Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung}, series = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna}, booktitle = {D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna}, organization = {D-A-CH Tagung <2007, Wien>}, pages = {1 -- 14}, year = {2007}, language = {de} } @inproceedings{TippkoetterStueckmannWinkelmannetal.2007, author = {Tippk{\"o}tter, Nils and St{\"u}ckmann, H. and Winkelmann, G. and Noack, U. and Beutel, S. and Scheper, T. and Ulber, R.}, title = {Optimisation of antibody-labelling of gold colloids for their application in an immunchromatographic assay for microcystin-LR}, series = {European BioPerspectives : celebrating the 25th DECHEMA annual convention of biotechnologists ; 30 May - 1 June 2007, Cologne, Germany ; book of abstracts ; abstracts, poster programme}, booktitle = {European BioPerspectives : celebrating the 25th DECHEMA annual convention of biotechnologists ; 30 May - 1 June 2007, Cologne, Germany ; book of abstracts ; abstracts, poster programme}, publisher = {Dechema}, address = {Frankfurt am Main}, pages = {126}, year = {2007}, language = {en} } @inproceedings{SchuhGottschalkNarretal.2007, author = {Schuh, G{\"u}nther and Gottschalk, Sebastian Friedrich and Narr, Claus and H{\"o}hne, Tim}, title = {Adaptive logistics : information management for planning and control of small series assembly}, series = {2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts}, booktitle = {2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts}, editor = {Z{\"a}h, Michael F.}, isbn = {978-0-9783187-0-3}, pages = {212 -- 221}, year = {2007}, language = {en} } @inproceedings{DrummSchmittDoetal.2007, author = {Drumm, Christian and Schmitt, Matthias and Do, Hong-Hai and Rahm, Erhard}, title = {Quickmig: automatic schema matching for data migration projects}, series = {Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007}, booktitle = {Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007}, isbn = {978-1-59593-803-9}, doi = {10.1145/1321440.1321458}, pages = {107 -- 116}, year = {2007}, language = {en} } @inproceedings{WeberMarkovicDrumm2007, author = {Weber, Ingo and Markovic, Ivan and Drumm, Christian}, title = {A conceptual framework for composition in business process management}, series = {Business Information Systems : 10th International Conference, BIS 2007, Poznan, Poland, April 25-27, 2007. Proceedings}, booktitle = {Business Information Systems : 10th International Conference, BIS 2007, Poznan, Poland, April 25-27, 2007. Proceedings}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-540-72035-5}, doi = {10.1007/978-3-540-72035-5_5}, pages = {54 -- 66}, year = {2007}, language = {en} } @inproceedings{Matcha2007, author = {Matcha, Heike}, title = {Parametric possibilities: designing with parametric modelling}, series = {Predicting the Future [25th eCAADe Conference Proceedings]}, booktitle = {Predicting the Future [25th eCAADe Conference Proceedings]}, isbn = {978-0-9541183-6-5}, pages = {849 -- 856}, year = {2007}, language = {en} } @inproceedings{Dachwald2007, author = {Dachwald, Bernd}, title = {Low-Thrust Mission Analysis and Global Trajectory Optimization Using Evolutionary Neurocontrol: New Results}, series = {European Workshop on Space Mission Analysis ESA/ESOC, Darmstadt, Germany 10 { 12 Dec 2007}, booktitle = {European Workshop on Space Mission Analysis ESA/ESOC, Darmstadt, Germany 10 { 12 Dec 2007}, year = {2007}, abstract = {Interplanetary trajectories for low-thrust spacecraft are often characterized by multiple revolutions around the sun. Unfortunately, the convergence of traditional trajectory optimizers that are based on numerical optimal control methods depends strongly on an adequate initial guess for the control function (if a direct method is used) or for the starting values of the adjoint vector (if an indirect method is used). Especially when many revolutions around the sun are re- quired, trajectory optimization becomes a very difficult and time-consuming task that involves a lot of experience and expert knowledge in astrodynamics and optimal control theory, because an adequate initial guess is extremely hard to find. Evolutionary neurocontrol (ENC) was proposed as a smart method for low-thrust trajectory optimization that fuses artificial neural networks and evolutionary algorithms to so-called evolutionary neurocontrollers (ENCs) [1]. Inspired by natural archetypes, ENC attacks the trajectoryoptimization problem from the perspective of artificial intelligence and machine learning, a perspective that is quite different from that of optimal control theory. Within the context of ENC, a trajectory is regarded as the result of a spacecraft steering strategy that maps permanently the actual spacecraft state and the actual target state onto the actual spacecraft control vector. This way, the problem of searching the optimal spacecraft trajectory is equivalent to the problem of searching (or "learning") the optimal spacecraft steering strategy. An artificial neural network is used to implement such a spacecraft steering strategy. It can be regarded as a parameterized function (the network function) that is defined by the internal network parameters. Therefore, each distinct set of network parameters defines a different network function and thus a different steering strategy. The problem of searching the optimal steering strategy is now equivalent to the problem of searching the optimal set of network parameters. Evolutionary algorithms that work on a population of (artificial) chromosomes are used to find the optimal network parameters, because the parameters can be easily mapped onto a chromosome. The trajectory optimization problem is solved when the optimal chromosome is found. A comparison of solar sail trajectories that have been published by others [2, 3, 4, 5] with ENC-trajectories has shown that ENCs can be successfully applied for near-globally optimal spacecraft control [1, 6] and that they are able to find trajectories that are closer to the (unknown) global optimum, because they explore the trajectory search space more exhaustively than a human expert can do. The obtained trajectories are fairly accurate with respect to the terminal constraint. If a more accurate trajectory is required, the ENC-solution can be used as an initial guess for a local trajectory optimization method. Using ENC, low-thrust trajectories can be optimized without an initial guess and without expert attendance. Here, new results for nuclear electric spacecraft and for solar sail spacecraft are presented and it will be shown that ENCs find very good trajectories even for very difficult problems. Trajectory optimization results are presented for 1. NASA's Solar Polar Imager Mission, a mission to attain a highly inclined close solar orbit with a solar sail [7] 2. a mission to de ect asteroid Apophis with a solar sail from a retrograde orbit with a very-high velocity impact [8, 9] 3. JPL's \2nd Global Trajectory Optimization Competition", a grand tour to visit four asteroids from different classes with a NEP spacecraft}, language = {en} } @inproceedings{DachwaldSeboldtLoebetal.2007, author = {Dachwald, Bernd and Seboldt, Wolfgang and Loeb, Horst W. and Schartner, Karl-Heinz}, title = {A comparison of SEP and NEP for a main belt asteroid sample return mission}, series = {7th International Symposium on Launcher Technologies, Barcelona, Spain, 02-05 April 2007}, booktitle = {7th International Symposium on Launcher Technologies, Barcelona, Spain, 02-05 April 2007}, pages = {1 -- 10}, year = {2007}, abstract = {Innovative interplanetary deep space missions, like a main belt asteroid sample return mission, require ever larger velocity increments (∆V s) and thus ever more demanding propulsion capabilities. Providing much larger exhaust velocities than chemical high-thrust systems, electric low-thrust space-propulsion systems can significantly enhance or even enable such high-energy missions. In 1995, a European-Russian Joint Study Group (JSG) presented a study report on "Advanced Interplanetary Missions Using Nuclear-Electric Propulsion" (NEP). One of the investigated reference missions was a sample return (SR) from the main belt asteroid (19) Fortuna. The envisaged nuclear power plant, Topaz-25, however, could not be realized and also the worldwide developments in space reactor hardware stalled. In this paper, we investigate, whether such a mission is also feasible using a solar electric propulsion (SEP) system and compare our SEP results to corresponding NEP results.}, language = {en} } @inproceedings{DachwaldKahleWie2007, author = {Dachwald, Bernd and Kahle, Ralph and Wie, Bong}, title = {Head-on impact deflection of NEAs: a case study for 99942 Apophis}, series = {Planetary Defense Conference 2007}, booktitle = {Planetary Defense Conference 2007}, pages = {1 -- 12}, year = {2007}, abstract = {Near-Earth asteroid (NEA) 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several less than 1 km-sized gravitational keyholes during its 2029-encounter. A pre-2029 kinetic impact is a very favorable option to nudge the asteroid out of a keyhole. The highest impact velocity and thus deflection can be achieved from a trajectory that is retrograde to Apophis orbit. With a chemical or electric propulsion system, however, many gravity assists and thus a long time is required to achieve this. We show in this paper that the solar sail might be the better propulsion system for such a mission: a solar sail Kinetic Energy Impactor (KEI) spacecraft could impact Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages. The spacecraft consists of a 160 m × 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. For a launch in 2020, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, the solar sail KEI concept is still feasible to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value}, language = {en} } @inproceedings{LoebSchartnerDachwaldetal.2007, author = {Loeb, Horst Wolfgang and Schartner, Karl-Heinz and Dachwald, Bernd and Seboldt, Wolfgang}, title = {SEP-Sample return from a main belt asteroid}, series = {30th International Electric Propulsion Conference}, booktitle = {30th International Electric Propulsion Conference}, pages = {1 -- 11}, year = {2007}, abstract = {By DLR-contact, sample return missions to the large main-belt asteroid "19, Fortuna" have been studied. The mission scenario has been based on three ion thrusters of the RIT-22 model, which is presently under space qualification, and on solar arrays equipped with triple-junction GaAs solar cells. After having designed the spacecraft, the orbit-to-orbit trajectories for both, a one-way SEP mission with a chemical sample return and an all-SEP return mission, have been optimized using a combination of artificial neural networks with evolutionary algorithms. Additionally, body-to-body trajectories have been investigated within a launch period between 2012 and 2015. For orbit-to-orbit calculation, the launch masses of the hybrid mission and of the all-SEP mission resulted in 2.05 tons and 1.56 tons, respectively, including a scientific payload of 246 kg. For the related transfer durations 4.14 yrs and 4.62 yrs were obtained. Finally, a comparison between the mission scenarios based on SEP and on NEP have been carried out favouring clearly SEP.}, language = {en} } @inproceedings{DachwaldMengaliQuartaetal.2007, author = {Dachwald, Bernd and Mengali, Giovanni and Quarta, Alessandro A and Macdonald, Malcolm and McInnes, Colin R}, title = {Optical solar sail degradation modelling}, series = {1st International Symposium on Solar Sailing}, booktitle = {1st International Symposium on Solar Sailing}, pages = {1 -- 27}, year = {2007}, abstract = {We propose a simple parametric OSSD model that describes the variation of the sail film's optical coefficients with time, depending on the sail film's environmental history, i.e., the radiation dose. The primary intention of our model is not to describe the exact behavior of specific film-coating combinations in the real space environment, but to provide a more general parametric framework for describing the general optical degradation behavior of solar sails.}, language = {en} } @inproceedings{GoemmelButenwegKob2007, author = {G{\"o}mmel, A. and Butenweg, Christoph and Kob, M.}, title = {A fluid-structure interaction model of vocal fold oscillation}, series = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007}, booktitle = {5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007}, isbn = {978-888453674-7}, pages = {127 -- 128}, year = {2007}, abstract = {Since fluid-structure interaction within the finite-element method is state of the art in many engineering fields, this method is used in voice analysis. A quasi two-dimensional model of the vocal folds including the ventricular folds is presented. First results of self-sustained vocal fold oscillation are presented and possibilities as well as limitations are discussed.}, language = {en} } @inproceedings{WeissAbanteribaEsch2007, author = {Weiss, Alexander and Abanteriba, Sylvester and Esch, Thomas}, title = {Investigation of Flow Separation Inside a Conical Rocket Nozzle With the Aid of an Annular Cross Flow}, series = {Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B}, booktitle = {Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B}, publisher = {American Society of Mechanical Engineers (ASME)}, address = {New York}, isbn = {0-7918-4288-6}, doi = {10.1115/FEDSM2007-37387}, pages = {1861 -- 1871}, year = {2007}, abstract = {Flow separation is a phenomenon that occurs in all kinds of supersonic nozzles sometimes during run-up and shut-down operations. Especially in expansion nozzles of rocket engines with large area ratio, flow separation can trigger strong side loads that can damage the structure of the nozzle. The investigation presented in this paper seeks to establish measures that may be applied to alter the point of flow separation. In order to achieve this, a supersonic nozzle was placed at the exit plane of the conical nozzle. This resulted in the generation of cross flow surrounding the core jet flow from the conical nozzle. Due to the entrainment of the gas stream from the conical nozzle the pressure in its exit plane was found to be lower than that of the ambient. A Cold gas instead of hot combustion gases was used as the working fluid. A mathematical simulation of the concept was validated by experiment. Measurements confirmed the simulation results that due to the introduction of a second nozzle the pressure in the separated region of the conical nozzle was significantly reduced. It was also established that the boundary layer separation inside the conical nozzle was delayed thus allowing an increased degree of overexpansion. The condition established by the pressure measurements was also demonstrated qualitatively using transparent nozzle configurations.}, language = {en} } @inproceedings{RitzFuchs2008, author = {Ritz, Thomas and Fuchs, Britta}, title = {Kosten-Nutzen-Bewertungen bei mobilen Anwendungen}, series = {Mobile und Ubiquit{\"a}re Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2008) 26. - 28. Februar 2008, M{\"u}nchen, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]}, booktitle = {Mobile und Ubiquit{\"a}re Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquit{\"a}re Informationssysteme (MMS 2008) 26. - 28. Februar 2008, M{\"u}nchen, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]}, editor = {Breitner, Michael}, publisher = {Ges. f{\"u}r Informatik}, address = {Bonn}, isbn = {978-3-88579-217-8}, pages = {164 -- 177}, year = {2008}, language = {de} } @inproceedings{Kurz2008, author = {Kurz, Melanie}, title = {On the benefit of moving images for the evaluation of form in virtual space : reflections in model theory}, series = {Design and semantics of form and movement : DeSForM 2008 ; [Hochschule f{\"u}r Gestaltung Offenbach am Main, 6.-7.11.2008]}, booktitle = {Design and semantics of form and movement : DeSForM 2008 ; [Hochschule f{\"u}r Gestaltung Offenbach am Main, 6.-7.11.2008]}, editor = {Feijs, Loe}, publisher = {Philips}, address = {Eindhoven}, isbn = {978-90-809801-2-9}, pages = {31 -- 34}, year = {2008}, language = {en} } @inproceedings{Kurz2008, author = {Kurz, Melanie}, title = {Theses on the significance of the model in the form-finding process}, series = {"Focused" - Current Design Research Projects and Methods : Swiss Design Network Symposium 2008, 30 - 31 May 2008 Mount Gurten, Berne Switzerland}, booktitle = {"Focused" - Current Design Research Projects and Methods : Swiss Design Network Symposium 2008, 30 - 31 May 2008 Mount Gurten, Berne Switzerland}, publisher = {SwissDesignNetwork, SDN}, address = {Genf}, isbn = {978-3-9523138-0-0}, pages = {115 -- 127}, year = {2008}, language = {en} } @inproceedings{ChristenBarteltKowalskietal.2008, author = {Christen, Marc and Bartelt, Perry and Kowalski, Julia and Stoffel, Lukus}, title = {Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS}, series = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008}, booktitle = {Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008}, pages = {709 -- 716}, year = {2008}, abstract = {Numerical models have become an essential part of snow avalanche engineering. Recent advances in understanding the rheology of flowing snow and the mechanics of entrainment and deposition have made numerical models more reliable. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, the application of numerical models poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to specify initial conditions (release zone dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this paper we discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with first and second-order numerical solution schemes. A tremendous effort has been invested in the implementation of advanced input and output features. Simulation results are therefore clearly and easily visualized to simplify their interpretation. More importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model performance. In this paper we present the governing differential equations, highlight some of the input and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that occurred in April 2008, near Klosters/Monbiel, Switzerland.}, language = {en} } @inproceedings{KowalskiMcElwaine2008, author = {Kowalski, Julia and McElwaine, J.}, title = {Two-phase debris flow modeling}, series = {Geophysical Research Abstracts}, booktitle = {Geophysical Research Abstracts}, year = {2008}, language = {en} } @inproceedings{LindnerKolbRingbeck2008, author = {Lindner, Marvin and Kolb, Andreas and Ringbeck, Thorsten}, title = {New insights into the calibration of ToF-sensors}, series = {2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008}, booktitle = {2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008}, publisher = {IEEE Service Center}, address = {Piscataway, NJ}, isbn = {978-1-4244-2339-2}, pages = {1 -- 5}, year = {2008}, abstract = {Time-of-flight (ToF) sensors have become an alternative to conventional distance sensing techniques like laser scanners or image based stereo. ToF sensors provide full range distance information at high frame-rates and thus have a significant impact onto current research in areas like online object recognition, collision prevention or scene reconstruction. However, ToF cameras like the photonic mixer device (PMD) still exhibit a number of challenges regarding static and dynamic effects, e.g. systematic distance errors and motion artefacts, respectively. Sensor calibration techniques reducing static system errors have been proposed and show promising results. However, current calibration techniques in general need a large set of reference data in order to determine the corresponding parameters for the calibration model. This paper introduces a new calibration approach which combines different demodulation techniques for the ToF- camera 's reference signal. Examples show, that the resulting combined demodulation technique yields improved distance values based on only two required reference data sets.}, language = {en} } @inproceedings{Braun2008, author = {Braun, Carsten}, title = {Ein modulares Verfahren f{\"u}r die numerische aeroelastische Analyse von Luftfahrzeugen}, series = {Motto: Wissen und Visionen f{\"u}r ein nachhaltiges Wachstum : Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008 / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). DGLR-Jahrbuch. 2008}, booktitle = {Motto: Wissen und Visionen f{\"u}r ein nachhaltiges Wachstum : Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008 / Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). DGLR-Jahrbuch. 2008}, publisher = {DGLR}, address = {Bonn}, pages = {787 -- 796}, year = {2008}, language = {de} } @inproceedings{MuellerHueben2008, author = {M{\"u}ller, Karsten and H{\"u}ben, Susanne}, title = {From rehabilitation strategy up to formation of lots : implementation of a computer-aided decision support system}, series = {11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31st August to 5th September 2008}, booktitle = {11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31st August to 5th September 2008}, pages = {12 S. : graph. Darst.}, year = {2008}, language = {en} }