@techreport{EschFunkeRoosen2010,
  author    = {Esch, Thomas and Funke, Harald and Roosen, Petra},
  title     = {SIoBiA - Safety Implications of Biofuels in Aviation},
  publisher = {EASA},
  address   = {K{\"o}ln},
  pages     = {279 Seiten},
  year      = {2010},
  abstract  = {Biofuels potentially interesting also for aviation purposes are predominantly liquid fuels produced from biomass. The most common biofuels today are biodiesel and bioethanol. Since diesel engines are rather rare in aviation this survey is focusing on ethanol admixed to gasoline products. The Directive 2003/30/EC of the European Parliament and the Council of May 8th 2003 on the promotion of the use of biofuels or other renewable fuels for transport encourage a growing admixture of biogenic fuel components to fossil automotive gasoline. Some aircraft models equipped with spark ignited piston engines are approved for operation with automotive gasoline, frequently called "MOGAS" (motor gasoline). The majority of those approvals is limited to MOGAS compositions that do not contain methanol or ethanol beyond negligible amounts. In the past years (bio-)MTBE or (bio-)ETBE have been widely used as blending component of automotive gasoline whilst the usage of low-molecular alcohols like methanol or ethanol has been avoided due to the handling problems especially with regard to the strong affinity for water. With rising mandatory bio-admixtures the conversion of the basic biogenic ethanol to ETBE, causing a reduction of energetic payoff, becomes more and more unattractive. Therefore the direct ethanol admixture is accordingly favoured. Due to the national enforcements of the directive 2003/30/EC more oxygenates produced from organic materials like bioethanol have started to appear in automotive gasolines already. The current fuel specification EN 228 already allows up to 3 \% volume per volume (v/v) (bio-)methanol or up to 5 \% v/v (bio-)ethanol as fuel components. This is also roughly the amount of biogenic components to comply with the legal requirements to avoid monetary penalties for producers and distributors of fuels. Since automotive fuel is cheaper than the common aviation gasoline (AVGAS), creates less problems with lead deposits in the engine, and in general produces less pollutants it is strongly favoured by pilots. But being designed for a different set of usage scenarios the use of automotive fuel with low molecular alcohols for aircraft operation may have adverse effects in aviation operation. Increasing amounts of ethanol admixtures impose various changes in the gasoline's chemical and physical properties, some of them rather unexpected and not within the range of flight experiences even of long-term pilots.},
  language  = {en}
}
@article{EschSalberWoltersetal.2002,
  author    = {Esch, Thomas and Salber, Wolfgang and Wolters, Peter and Geiger, Jos{\´e} and Dilthey, Jochen},
  title     = {Synergies of variable valve actuation and direct injection},
  series = {Direct injection SI engine technology 2002 : [SAE 2002 world congress, Detroit, Michigan, USA, March 4 - 7, 2002].},
  journal   = {Direct injection SI engine technology 2002 : [SAE 2002 world congress, Detroit, Michigan, USA, March 4 - 7, 2002].},
  publisher = {Society of Automotive Engineers},
  address   = {Warrendale, Pa},
  isbn      = {0-7680-0961-8},
  pages     = {45 -- 53},
  year      = {2002},
  language  = {en}
}
@inproceedings{EssingholtMeyerKuhnetal.2018,
  author    = {Essingholt, Felix and Meyer, Frederic and Kuhn, Peter and Schmidt, Philip and Benkner, Thorsten and Grabmaier, Anton},
  title     = {Non-invasive heart beat measurement using microwave resonators},
  series = {Proceedings, Vol. 2, Eurosensors 2018 Conference, Graz, Austria, 9-12 September 2018},
  booktitle = {Proceedings, Vol. 2, Eurosensors 2018 Conference, Graz, Austria, 9-12 September 2018},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2504-3900},
  doi       = {10.3390/proceedings2131002},
  pages     = {1002},
  year      = {2018},
  language  = {en}
}
@inproceedings{EvansBraunUlmeretal.2022,
  author    = {Evans, Benjamin and Braun, Sebastian and Ulmer, Jessica and Wollert, J{\"o}rg},
  title     = {AAS implementations - current problems and solutions},
  series = {20th International Conference on Mechatronics - Mechatronika (ME)},
  booktitle = {20th International Conference on Mechatronics - Mechatronika (ME)},
  publisher = {IEEE},
  address   = {New York, NY},
  isbn      = {978-1-6654-1040-3},
  doi       = {10.1109/ME54704.2022.9982933},
  pages     = {6 Seiten},
  year      = {2022},
  abstract  = {The fourth industrial revolution presents a multitude of challenges for industries, one of which being the increased flexibility required of manufacturing lines as a result of increased consumer demand for individualised products. One solution to tackle this challenge is the digital twin, more specifically the standardised model of a digital twin also known as the asset administration shell. The standardisation of an industry wide communications tool is a critical step in enabling inter-company operations. This paper discusses the current state of asset administration shells, the frameworks used to host them and their problems that need to be addressed. To tackle these issues, we propose an event-based server capable of drastically reducing response times between assets and asset administration shells and a multi-agent system used for the orchestration and deployment of the shells in the field.},
  language  = {en}
}
@article{EveraersKarimiVarzanehFlecketal.2020,
  author    = {Everaers, Ralf and Karimi-Varzaneh, Hossein Ali and Fleck, Franz and Hojdis, Nils and Svaneborg, Carsten},
  title     = {Kremer-Grest Models for Commodity Polymer Melts: Linking Theory, Experiment, and Simulation at the Kuhn Scale},
  series = {Macromolecules},
  volume    = {53},
  journal   = {Macromolecules},
  number    = {6},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {1520-5835},
  doi       = {10.1021/acs.macromol.9b02428},
  pages     = {1901 -- 1916},
  year      = {2020},
  abstract  = {The Kremer-Grest (KG) polymer model is a standard model for studying generic polymer properties in molecular dynamics simulations. It owes its popularity to its simplicity and computational efficiency, rather than its ability to represent specific polymers species and conditions. Here we show that by tuning the chain stiffness it is possible to adapt the KG model to model melts of real polymers. In particular, we provide mapping relations from KG to SI units for a wide range of commodity polymers. The connection between the experimental and the KG melts is made at the Kuhn scale, i.e., at the crossover from the chemistry-specific small scale to the universal large scale behavior. We expect Kuhn scale-mapped KG models to faithfully represent universal properties dominated by the large scale conformational statistics and dynamics of flexible polymers. In particular, we observe very good agreement between entanglement moduli of our KG models and the experimental moduli of the target polymers.},
  language  = {en}
}
@incollection{EversFleischhakerPalffyetal.2010,
  author    = {Evers, J{\"o}rg and Fleischhaker, Robert and P{\´a}lffy, A. and Keitel, C.},
  title     = {Light propagation : From atomic to nuclear quantum optics},
  series = {Modern optics and photonics: atoms and structured media},
  booktitle = {Modern optics and photonics: atoms and structured media},
  publisher = {World Scientific Publishing Co.},
  isbn      = {978-981431327-8},
  doi       = {10.1142/9789814313278_0001},
  pages     = {3 -- 15},
  year      = {2010},
  language  = {en}
}
@article{EweKleinPieperetal.2009,
  author    = {Ewe, Hendrik and Klein, Peter and Pieper, Martin and F{\"u}ldner, G.},
  title     = {Heat conductivity in sintered aluminium fibers},
  series = {Cellular metals for structural and functional applications : CELLMET 2008 ; proceedings of the International Symposium on Cellular Metals for Structural and Functional Applications held October 8 - 10, 2008 in Dresden, Germany / ed. by G{\"u}nter Stephani},
  journal   = {Cellular metals for structural and functional applications : CELLMET 2008 ; proceedings of the International Symposium on Cellular Metals for Structural and Functional Applications held October 8 - 10, 2008 in Dresden, Germany / ed. by G{\"u}nter Stephani},
  publisher = {Fraunhofer IFAM},
  address   = {Dresden},
  pages     = {187 -- 193},
  year      = {2009},
  language  = {en}
}
@article{Fabo1993,
  author    = {Fabo, Sabine},
  title     = {Arts and media : towards an universal understanding},
  series = {Leonardo},
  volume    = {26(1993)},
  journal   = {Leonardo},
  number    = {4},
  issn      = {0024-094X},
  pages     = {316 -- 319},
  year      = {1993},
  language  = {en}
}
@incollection{Fabo2011,
  author    = {Fabo, Sabine},
  title     = {REMOTEWORDS - anticipating the big observer},
  series = {Hacking the city : Interventionen in urbanen und kommunikativen R{\"a}umen ; Museum Folkwang, [16. Juli - 26. September 2010]},
  booktitle = {Hacking the city : Interventionen in urbanen und kommunikativen R{\"a}umen ; Museum Folkwang, [16. Juli - 26. September 2010]},
  editor    = {Schmidt, Sabine Maria},
  publisher = {Steidl ; Edition Folkwang},
  address   = {G{\"o}ttingen [u.a.]},
  isbn      = {978-3-86930-187-7},
  pages     = {134 -- 137},
  year      = {2011},
  subject      = {Streetart},
  language  = {en}
}
@incollection{Fabo2013,
  author    = {Fabo, Sabine},
  title     = {Portrait of the artist as a spoilsport : Marcel Odenbach's concept of detachment},
  series = {Take it or leave it : Marcel Odenbach - anthology of texts and videos. - (eva - edition video art ; 2)},
  booktitle = {Take it or leave it : Marcel Odenbach - anthology of texts and videos. - (eva - edition video art ; 2)},
  editor    = {Kacunko, Slavko},
  publisher = {Logos},
  address   = {Berlin},
  isbn      = {978-3-8325-3386-1},
  pages     = {11 -- 29},
  year      = {2013},
  language  = {en}
}
@article{Fabo2002,
  author    = {Fabo, Sabine},
  title     = {Learning from Brachelen},
  series = {Freistil (Boxhorn ; 8)},
  journal   = {Freistil (Boxhorn ; 8)},
  publisher = {FH Aachen, Fachbereich Gestaltung},
  address   = {Aachen},
  pages     = {2,1 -- 2,31},
  year      = {2002},
  language  = {en}
}
@article{Fabo2002,
  author    = {Fabo, Sabine},
  title     = {Welcome to the training: Actionist Respoke interaktiv by Michael Jonoschek und R{\"u}diger Schl{\"o}mer},
  series = {Bilder-Codes : Internationaler Medienkunstpreis 2002},
  journal   = {Bilder-Codes : Internationaler Medienkunstpreis 2002},
  editor    = {K{\"o}nches, Barbara},
  publisher = {ZKM},
  address   = {Karlsruhe},
  isbn      = {3-928201-28-X},
  pages     = {41 -- 48},
  year      = {2002},
  language  = {en}
}
@inproceedings{Fabo2004,
  author    = {Fabo, Sabine},
  title     = {Audio-visual hybrids : between immersion and detachment},
  year      = {2004},
  abstract  = {Close interrelations between sound and image are not a mere phenomenon of today's multimedia technology. The idea of the synthesis of different media lies at the core of the concept of the Gesamtkunstwerk in the second half of the 19th century and it can also be traced back to the synaesthesia debate at the beginning of the 20th century [...].},
  subject      = {Elektronische Kunst},
  language  = {en}
}
@article{Fabo1998,
  author    = {Fabo, Sabine},
  title     = {Exhibition review: Documenta X and its media concept},
  series = {Leonardo},
  volume    = {31},
  journal   = {Leonardo},
  number    = {4},
  isbn      = {0024-094x},
  pages     = {330},
  year      = {1998},
  language  = {en}
}
@article{FaganBitzBjoerkmanBurtscheretal.2021,
  author    = {Fagan, Andrew J. and Bitz, Andreas and Bj{\"o}rkman-Burtscher, Isabella M. and Collins, Christopher M. and Kimbrell, Vera and Raaijmakers, Alexander J. E.},
  title     = {7T MR Safety},
  series = {Journal of Magnetic Resonance Imaging (JMRI)},
  volume    = {53},
  journal   = {Journal of Magnetic Resonance Imaging (JMRI)},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.27319},
  pages     = {333 -- 346},
  year      = {2021},
  language  = {en}
}
@article{FalkenbergBottBongaertsetal.2022,
  author    = {Falkenberg, Fabian and Bott, Michael and Bongaerts, Johannes and Siegert, Petra},
  title     = {Phylogenetic survey of the subtilase family and a data-mining-based search for new subtilisins from Bacillaceae},
  series = {Frontiers in Microbiology},
  volume    = {2022},
  journal   = {Frontiers in Microbiology},
  number    = {13},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {1664-302X},
  doi       = {10.3389/fmicb.2022.1017978},
  pages     = {Artikel 13:1017978},
  year      = {2022},
  abstract  = {The subtilase family (S8), a member of the clan SB of serine proteases are ubiquitous in all kingdoms of life and fulfil different physiological functions. Subtilases are divided in several groups and especially subtilisins are of interest as they are used in various industrial sectors. Therefore, we searched for new subtilisin sequences of the family Bacillaceae using a data mining approach. The obtained 1,400 sequences were phylogenetically classified in the context of the subtilase family. This required an updated comprehensive overview of the different groups within this family. To fill this gap, we conducted a phylogenetic survey of the S8 family with characterised holotypes derived from the MEROPS database. The analysis revealed the presence of eight previously uncharacterised groups and 13 subgroups within the S8 family. The sequences that emerged from the data mining with the set filter parameters were mainly assigned to the subtilisin subgroups of true subtilisins, high-alkaline subtilisins, and phylogenetically intermediate subtilisins and represent an excellent source for new subtilisin candidates.},
  language  = {en}
}
@article{FalkenbergKohnBottetal.2023,
  author    = {Falkenberg, Fabian and Kohn, Sophie and Bott, Michael and Bongaerts, Johannes and Siegert, Petra},
  title     = {Biochemical characterisation of a novel broad pH spectrum subtilisin from Fictibacillus arsenicus DSM 15822ᵀ},
  series = {FEBS Open Bio},
  volume    = {13},
  journal   = {FEBS Open Bio},
  number    = {11},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {2211-5463},
  doi       = {10.1002/2211-5463.13701},
  pages     = {2035 -- 2046},
  year      = {2023},
  abstract  = {Subtilisins from microbial sources, especially from the Bacillaceae family, are of particular interest for biotechnological applications and serve the currently growing enzyme market as efficient and novel biocatalysts. Biotechnological applications include use in detergents, cosmetics, leather processing, wastewater treatment and pharmaceuticals. To identify a possible candidate for the enzyme market, here we cloned the gene of the subtilisin SPFA from Fictibacillus arsenicus DSM 15822ᵀ (obtained through a data mining-based search) and expressed it in Bacillus subtilis DB104. After production and purification, the protease showed a molecular mass of 27.57 kDa and a pI of 5.8. SPFA displayed hydrolytic activity at a temperature optimum of 80 °C and a very broad pH optimum between 8.5 and 11.5, with high activity up to pH 12.5. SPFA displayed no NaCl dependence but a high NaCl tolerance, with decreasing activity up to concentrations of 5 m NaCl. The stability enhanced with increasing NaCl concentration. Based on its substrate preference for 10 synthetic peptide 4-nitroanilide substrates with three or four amino acids and its phylogenetic classification, SPFA can be assigned to the subgroup of true subtilisins. Moreover, SPFA exhibited high tolerance to 5\% (w/v) SDS and 5\% H₂O₂ (v/v). The biochemical properties of SPFA, especially its tolerance of remarkably high pH, SDS and H₂O₂, suggest it has potential for biotechnological applications.},
  language  = {en}
}
@article{FalkenbergRahbaFischeretal.2022,
  author    = {Falkenberg, Fabian and Rahba, Jade and Fischer, David and Bott, Michael and Bongaerts, Johannes and Siegert, Petra},
  title     = {Biochemical characterization of a novel oxidatively stable, halotolerant, and high-alkaline subtilisin from Alkalihalobacillus okhensis Kh10-101T},
  series = {FEBS Open Bio},
  volume    = {12},
  journal   = {FEBS Open Bio},
  number    = {10},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {2211-5463},
  doi       = {10.1002/2211-5463.13457},
  pages     = {1729 -- 1746},
  year      = {2022},
  abstract  = {Halophilic and halotolerant microorganisms represent a promising source of salt-tolerant enzymes suitable for various biotechnological applications where high salt concentrations would otherwise limit enzymatic activity. Considering the current growing enzyme market and the need for more efficient and new biocatalysts, the present study aimed at the characterization of a high-alkaline subtilisin from Alkalihalobacillus okhensis Kh10-101T. The protease gene was cloned and expressed in Bacillus subtilis DB104. The recombinant protease SPAO with 269 amino acids belongs to the subfamily of high-alkaline subtilisins. The biochemical characteristics of purified SPAO were analyzed in comparison with subtilisin Carlsberg, Savinase, and BPN'. SPAO, a monomer with a molecular mass of 27.1 kDa, was active over a wide range of pH 6.0-12.0 and temperature 20-80 °C, optimally at pH 9.0-9.5 and 55 °C. The protease is highly oxidatively stable to hydrogen peroxide and retained 58\% of residual activity when incubated at 10 °C with 5\% (v/v) H2O2 for 1 h while stimulated at 1\% (v/v) H2O2. Furthermore, SPAO was very stable and active at NaCl concentrations up to 5.0 m. This study demonstrates the potential of SPAO for biotechnological applications in the future.},
  language  = {en}
}
@article{FalkenbergVossBottetal.2023,
  author    = {Falkenberg, Fabian and Voß, Leonie and Bott, Michael and Bongaerts, Johannes and Siegert, Petra},
  title     = {New robust subtilisins from halotolerant and halophilic Bacillaceae},
  series = {Applied Microbiology and Biotechnology},
  volume    = {107},
  journal   = {Applied Microbiology and Biotechnology},
  publisher = {Springer Nature},
  address   = {Berlin},
  issn      = {1432-0614},
  doi       = {10.1007/s00253-023-12553-w},
  pages     = {3939 -- 3954},
  year      = {2023},
  abstract  = {The aim of the present study was the characterisation of three true subtilisins and one phylogenetically intermediate subtilisin from halotolerant and halophilic microorganisms. Considering the currently growing enzyme market for efficient and novel biocatalysts, data mining is a promising source for novel, as yet uncharacterised enzymes, especially from halophilic or halotolerant Bacillaceae, which offer great potential to meet industrial needs. Both halophilic bacteria Pontibacillus marinus DSM 16465ᵀ and Alkalibacillus haloalkaliphilus DSM 5271ᵀ and both halotolerant bacteria Metabacillus indicus DSM 16189 and Litchfieldia alkalitelluris DSM 16976ᵀ served as a source for the four new subtilisins SPPM, SPAH, SPMI and SPLA. The protease genes were cloned and expressed in Bacillus subtilis DB104. Purification to apparent homogeneity was achieved by ethanol precipitation, desalting and ion-exchange chromatography. Enzyme activity could be observed between pH 5.0-12.0 with an optimum for SPPM, SPMI and SPLA around pH 9.0 and for SPAH at pH 10.0. The optimal temperature for SPMI and SPLA was 70 °C and for SPPM and SPAH 55 °C and 50 °C, respectively. All proteases showed high stability towards 5\% (w/v) SDS and were active even at NaCl concentrations of 5 M. The four proteases demonstrate potential for future biotechnological applications.},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Additive manufactured mechanical disentanglement lock},
  series = {RTejournal - Forum f{\"u}r Rapid Technologie},
  volume    = {12},
  journal   = {RTejournal - Forum f{\"u}r Rapid Technologie},
  publisher = {Fachhochschule Aachen},
  address   = {Aachen},
  issn      = {1614-0923},
  url       = {http://nbn-resolving.de/urn:nbn:de:0009-2-42147},
  year      = {2015},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective Laser Melting of Soda-Lime Glass Powder},
  series = {International Journal of Applied Ceramic Technology},
  volume    = {12},
  journal   = {International Journal of Applied Ceramic Technology},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  issn      = {1744-7402},
  doi       = {10.1111/ijac.12338},
  pages     = {53 -- 61},
  year      = {2015},
  language  = {en}
}
@article{FateriGebhardt2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications},
  series = {International Journal of Applied Ceramic Technology},
  volume    = {12},
  journal   = {International Journal of Applied Ceramic Technology},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Oxford},
  isbn      = {1744-7402},
  doi       = {10.1111/ijac.12326},
  pages     = {46 -- 52},
  year      = {2015},
  language  = {en}
}
@inproceedings{FateriGebhardt2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Jewelry fabrication via selective laser melting of glass},
  series = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  booktitle = {ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications},
  isbn      = {978-0-7918-4583-7},
  doi       = {10.1115/ESDA2014-20380},
  pages     = {V001T06A005},
  year      = {2014},
  abstract  = {Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.},
  language  = {en}
}
@incollection{FateriGebhardt2020,
  author    = {Fateri, Miranda and Gebhardt, Andreas},
  title     = {Introduction to Additive Manufacturing},
  series = {3D Printing of Optical Components},
  booktitle = {3D Printing of Optical Components},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-58960-8},
  doi       = {10.1007/978-3-030-58960-8_1},
  pages     = {1 -- 22},
  year      = {2020},
  abstract  = {Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the "printed" layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.},
  language  = {en}
}
@inproceedings{FateriGebhardtGabriellietal.2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Gabrielli, Roland Antonius and Herdrich, Georg and Fasoulas, Stefanos and Großmann, Agnes and Schnauffer, Peter and Middendorf, Peter},
  title     = {Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant},
  series = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  booktitle = {International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan},
  pages     = {5 S.},
  year      = {2015},
  language  = {en}
}
@inproceedings{FateriGebhardtKhosravi2013,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Khosravi, Maziar},
  title     = {Experimental investigation of selective laser melting of lunar regolith for in-situ applications},
  series = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  booktitle = {ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15-21, 2013. Vol. 2A: Advanced manufacturing},
  publisher = {ASME},
  organization    = {American Society of Mechanical Engineers},
  isbn      = {978-0-7918-5618-5},
  pages     = {V02AT02A008},
  year      = {2013},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces},
  series = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  booktitle = {International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA},
  pages     = {9 S.},
  year      = {2015},
  abstract  = {The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.},
  language  = {en}
}
@inproceedings{FateriGebhardtRenftle2015,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Renftle, Georg},
  title     = {Additive manufacturing of drainage segments for cooling system of crucible melting furnaces},
  series = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  booktitle = {Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0196-6219},
  doi       = {10.1002/9781119211662.ch14},
  pages     = {123 -- 131},
  year      = {2015},
  language  = {en}
}
@article{FateriGebhardtThuemmleretal.2014,
  author    = {Fateri, Miranda and Gebhardt, Andreas and Th{\"u}mmler, Stefan and Thurn, Laura},
  title     = {Experimental investigation on selective laser melting of glass},
  series = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  volume    = {56 (2014)},
  journal   = {Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  doi       = {10.1016/j.phpro.2014.08.118},
  pages     = {357 -- 364},
  year      = {2014},
  language  = {en}
}
@article{FateriHoetterGebhardt2012,
  author    = {Fateri, Miranda and H{\"o}tter, Jan-Steffen and Gebhardt, Andreas},
  title     = {Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting},
  series = {Physics Procedia},
  volume    = {39},
  journal   = {Physics Procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.062},
  pages     = {464 -- 470},
  year      = {2012},
  abstract  = {Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.},
  language  = {en}
}
@article{FayyaziSardarThomasetal.2023,
  author    = {Fayyazi, Mojgan and Sardar, Paramjotsingh and Thomas, Sumit Infent and Daghigh, Roonak and Jamali, Ali and Esch, Thomas and Kemper, Hans and Langari, Reza and Khayyam, Hamid},
  title     = {Artificial intelligence/machine learning in energy management systems, control, and optimization of hydrogen fuel cell vehicles},
  volume    = {15},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/su15065249},
  pages     = {38},
  year      = {2023},
  abstract  = {Environmental emissions, global warming, and energy-related concerns have accelerated the advancements in conventional vehicles that primarily use internal combustion engines. Among the existing technologies, hydrogen fuel cell electric vehicles and fuel cell hybrid electric vehicles may have minimal contributions to greenhouse gas emissions and thus are the prime choices for environmental concerns. However, energy management in fuel cell electric vehicles and fuel cell hybrid electric vehicles is a major challenge. Appropriate control strategies should be used for effective energy management in these vehicles. On the other hand, there has been significant progress in artificial intelligence, machine learning, and designing data-driven intelligent controllers. These techniques have found much attention within the community, and state-of-the-art energy management technologies have been developed based on them. This manuscript reviews the application of machine learning and intelligent controllers for prediction, control, energy management, and vehicle to everything (V2X) in hydrogen fuel cell vehicles. The effectiveness of data-driven control and optimization systems are investigated to evolve, classify, and compare, and future trends and directions for sustainability are discussed.},
  language  = {en}
}
@article{FassbenderSchmittSchoeningetal.2000,
  author    = {Faßbender, F. and Schmitt, G. and Sch{\"o}ning, Michael Josef and L{\"u}th, H. and Buß, G. and Schultze, J. W.},
  title     = {Optimization of passivation layers for corrosion protection of silicon-based microelectrode arrays},
  series = {Sensors and Actuators B. 68 (2000), H. 1-3},
  journal   = {Sensors and Actuators B. 68 (2000), H. 1-3},
  isbn      = {0925-4005},
  pages     = {128 -- 133},
  year      = {2000},
  language  = {en}
}
@article{FassbenderSchmittSchoeningetal.1999,
  author    = {Faßbender, F. and Schmitt, G. and Sch{\"o}ning, Michael Josef and L{\"u}th, H. and Buß, G. and Schultze, J. W.},
  title     = {Passivation and corrosion of microsensor devices exemplified at microelectrode arrays},
  series = {Proceedings : The Hague, The Netherlands, September 12 - 15, 1999 / [ed. by M. Bartek]. Vol 1.},
  journal   = {Proceedings : The Hague, The Netherlands, September 12 - 15, 1999 / [ed. by M. Bartek]. Vol 1.},
  address   = {The Hague, The Netherlands},
  isbn      = {90-76699-02-X},
  pages     = {953 -- 956},
  year      = {1999},
  language  = {en}
}
@article{Fassbender2001,
  author    = {Faßbender, Heinz},
  title     = {Reengineering an Ada95-programmed command and control information system by using UML},
  series = {Proceedings : September 30 - October 4, 2001, Twin Cities, Best Western The Thunderbird Hotel \& Convention Center, Bloomington, MN, USA / ACM SIGAda Annual International Conference (SIGAda 2001)},
  journal   = {Proceedings : September 30 - October 4, 2001, Twin Cities, Best Western The Thunderbird Hotel \& Convention Center, Bloomington, MN, USA / ACM SIGAda Annual International Conference (SIGAda 2001)},
  publisher = {ACM},
  address   = {New York, NY},
  isbn      = {1-58113-392-8},
  pages     = {53 -- 60},
  year      = {2001},
  language  = {en}
}
@article{Fassbender1993,
  author    = {Faßbender, Heinz},
  title     = {Implementation of a universal unification algorithm for macro tree transducers},
  series = {Fundamentals of computation theory : proceedings / 9th International Conference, FCT '93, Szeged, Hungary, August 23 - 27, 1993. Zolt{\´a}n {\´E}sik (ed.)},
  journal   = {Fundamentals of computation theory : proceedings / 9th International Conference, FCT '93, Szeged, Hungary, August 23 - 27, 1993. Zolt{\´a}n {\´E}sik (ed.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-57163-9},
  pages     = {222 -- 233},
  year      = {1993},
  language  = {en}
}
@article{Fassbender1995,
  author    = {Faßbender, Heinz},
  title     = {Implementation of a UU-Algorithm for primitive recursive tree functions},
  series = {Fundamentals of computation theory : proceedings / 10th International Conference, FCT '95, Dresden, Germany, August 22 - 25, 1995. Horst Reichel (ed.)},
  journal   = {Fundamentals of computation theory : proceedings / 10th International Conference, FCT '95, Dresden, Germany, August 22 - 25, 1995. Horst Reichel (ed.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-60249-6},
  pages     = {233 -- 242},
  year      = {1995},
  language  = {en}
}
@article{Fassbender1995,
  author    = {Faßbender, Heinz},
  title     = {A verified implementation of narrowing},
  series = {Programming languages: implementations, logics and programs : proceedings / 7th International Symposium, PLILP '95, Utrecht, The Netherlands, September 20 - 22, 1995. Manuel Hermenegildo ... (ed.)},
  journal   = {Programming languages: implementations, logics and programs : proceedings / 7th International Symposium, PLILP '95, Utrecht, The Netherlands, September 20 - 22, 1995. Manuel Hermenegildo ... (ed.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-60359-X},
  pages     = {63 -- 80},
  year      = {1995},
  language  = {en}
}
@article{FassbenderBuehler1999,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {Making a C2 information system platform independent by using internet and middleware technologies},
  series = {Proceedings of the 1999 Command and Control Research and Technology Symposium, Juni 1999, Newport, USA},
  journal   = {Proceedings of the 1999 Command and Control Research and Technology Symposium, Juni 1999, Newport, USA},
  pages     = {1 -- 11},
  year      = {1999},
  language  = {en}
}
@article{FassbenderBuehler2000,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {The join of a geographical situation display system and a platform independent C2 information system},
  series = {Proceedings of the 2000 Command and Control Research and Technology Symposium, Juni 2000, Monterey, USA},
  journal   = {Proceedings of the 2000 Command and Control Research and Technology Symposium, Juni 2000, Monterey, USA},
  pages     = {1 -- 7},
  year      = {2000},
  language  = {en}
}
@article{FassbenderBuehler2001,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {Modelling command and control information systems by UML},
  series = {Proceedings of the Information Systems Technology Panel Symposium / Information Management Challenges in Achieving Coalition Interoperability, Mai 2001, Quebec City, Kanada},
  journal   = {Proceedings of the Information Systems Technology Panel Symposium / Information Management Challenges in Achieving Coalition Interoperability, Mai 2001, Quebec City, Kanada},
  pages     = {7-1 -- 7-9},
  year      = {2001},
  language  = {en}
}
@article{FassbenderBuehler2002,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {An experimental command and control information system based on Enterprise Java bean technology},
  series = {Proceedings of the 7th International Command and Control Research and Technology Symposium, September 2002, Quebec City, Kanada},
  journal   = {Proceedings of the 7th International Command and Control Research and Technology Symposium, September 2002, Quebec City, Kanada},
  pages     = {1 -- 8},
  year      = {2002},
  language  = {en}
}
@article{FassbenderBuehler1999,
  author    = {Faßbender, Heinz and B{\"u}hler, Gerhard},
  title     = {Applying Ada, Java and CORBA for making a command and control information system platform independent},
  series = {Proceedings : (SIGAda '99) ; October 17 - 21, 1999 ; Crowne Plaza, Redondo Beach \& Marine Hotel, Redondo Beach, CA, USA / ACM SIGAda Annual International Conference},
  journal   = {Proceedings : (SIGAda '99) ; October 17 - 21, 1999 ; Crowne Plaza, Redondo Beach \& Marine Hotel, Redondo Beach, CA, USA / ACM SIGAda Annual International Conference},
  publisher = {ACM},
  address   = {New York, NY},
  isbn      = {1-58113-127-5},
  pages     = {83 -- 88},
  year      = {1999},
  language  = {en}
}
@book{FassbenderGladtzVogler1991,
  author    = {Faßbender, Heinz and Gladtz, Katia and Vogler, Heiko},
  title     = {Compiler based implementation of syntax directed functional programming},
  publisher = {RWTH, Fachgruppe Informatik},
  address   = {Aachen},
  pages     = {37 S.},
  year      = {1991},
  language  = {en}
}
@article{FassbenderManeth1998,
  author    = {Faßbender, Heinz and Maneth, Sebastian},
  title     = {A strict border for the decidability of e-unification for recursive functions / Faßbender, Heinz ; Maneth, Sebastian},
  series = {Journal of functional and logic programming. 1998 (1998), H. 4},
  journal   = {Journal of functional and logic programming. 1998 (1998), H. 4},
  isbn      = {1080-5230},
  year      = {1998},
  language  = {en}
}
@article{FassbenderManeth1996,
  author    = {Faßbender, Heinz and Maneth, Sebastian},
  title     = {A strict border for the decidability of e-unification for recursive functions / Faßbender, Heinz ; Maneth, Sebastian},
  series = {Algebraic and logic programming : proceedings / 5th International Conference, ALP '96, Aachen, Germany, September 25 - 27, 1996. Michael Hanus ... (ed.)},
  journal   = {Algebraic and logic programming : proceedings / 5th International Conference, ALP '96, Aachen, Germany, September 25 - 27, 1996. Michael Hanus ... (ed.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-61735-3},
  pages     = {194 -- 208},
  year      = {1996},
  language  = {en}
}
@book{FassbenderManeth1996,
  author    = {Faßbender, Heinz and Maneth, Sebastian},
  title     = {A strict border for the decidability of e-unification for recursive functions},
  publisher = {TU, Fak. Informatik},
  address   = {Dresden},
  pages     = {27 S. : graph. Darst.},
  year      = {1996},
  language  = {en}
}
@article{FassbenderMoessleVogler1996,
  author    = {Faßbender, Heinz and M{\"o}ßle, Andrea and Vogler, Heiko},
  title     = {Implementation of a deterministic partial e-unification algorithm for macro tree transducers},
  series = {Journal of functional and logic programming. 1996 (1996), H. 2},
  journal   = {Journal of functional and logic programming. 1996 (1996), H. 2},
  isbn      = {1080-5230},
  year      = {1996},
  language  = {en}
}
@article{FassbenderVogler1991,
  author    = {Faßbender, Heinz and Vogler, Heiko},
  title     = {A narrowing machine for the functional logic language BABEL, restricted to primitive recursion : abstract},
  series = {Granada Workshop on the Integration of Functional and Logic Programming / Granada Workshop on the Integration of Functional and Logic Programming <1990>. K. Indermark ... (ed.)},
  journal   = {Granada Workshop on the Integration of Functional and Logic Programming / Granada Workshop on the Integration of Functional and Logic Programming <1990>. K. Indermark ... (ed.)},
  publisher = {RWTH, Fachgruppe Informatik},
  address   = {Aachen},
  pages     = {95 -- 96},
  year      = {1991},
  language  = {en}
}
@article{FassbenderVogler1992,
  author    = {Faßbender, Heinz and Vogler, Heiko},
  title     = {An implementation of syntax directed functional programming on nested-stack machines},
  series = {Formal Aspects of Computing. 4 (1992), H. 4},
  journal   = {Formal Aspects of Computing. 4 (1992), H. 4},
  isbn      = {0934-5043},
  pages     = {341 -- 375},
  year      = {1992},
  language  = {en}
}
@article{FassbenderVogler1994,
  author    = {Faßbender, Heinz and Vogler, Heiko},
  title     = {A universal unification algorithm based on unification-driven leftmost outermost narrowing},
  series = {Acta Cybernetica. 11 (1994), H. 3},
  journal   = {Acta Cybernetica. 11 (1994), H. 3},
  isbn      = {0324-721x},
  pages     = {139 -- 167},
  year      = {1994},
  language  = {en}
}
@book{FassbenderVogler1992,
  author    = {Faßbender, Heinz and Vogler, Heiko},
  title     = {A universal unification algorithm based on unification driven leftmost outermost narrowing},
  publisher = {Univ. Ulm, Fak. f{\"u}r Informatik},
  address   = {Ulm},
  pages     = {47 S. : graph. Darst.},
  year      = {1992},
  language  = {en}
}
@book{FassbenderVogler1990,
  author    = {Faßbender, Heinz and Vogler, Heiko},
  title     = {A call-by-need implementation of syntax directed functional programming},
  publisher = {RWTH, Fachgruppe Informatik},
  address   = {Aachen},
  pages     = {44 S. : graph. Darst.},
  year      = {1990},
  language  = {en}
}
@article{FassbenderVoglerWedel1993,
  author    = {Faßbender, Heinz and Vogler, Heiko and Wedel, Andrea},
  title     = {An abstract machine for the E-Unification with macro tree transducer},
  series = {7th International Workshop on Unification : 13. 06. - 14. 06. 93 / Franz Baader ... (eds.). [Boston University, Boston, USA]},
  journal   = {7th International Workshop on Unification : 13. 06. - 14. 06. 93 / Franz Baader ... (eds.). [Boston University, Boston, USA]},
  year      = {1993},
  language  = {en}
}
@book{FassbenderVoglerWedel1994,
  author    = {Faßbender, Heinz and Vogler, Heiko and Wedel, Andrea},
  title     = {Implementation of a deterministic partial E-unification algorithm for macro tree transducers},
  publisher = {Univ. Ulm, Fak. f{\"u}r Informatik},
  address   = {Ulm},
  pages     = {62 S.},
  year      = {1994},
  language  = {en}
}
@article{FeichtingerEilmannBuchmannetal.2014,
  author    = {Feichtinger, Linda M. and Eilmann, Britta and Buchmann, Nina and Rigling, Andreas},
  title     = {Growth adjustments of conifers to drought and to century-long irrigation},
  series = {Forest Ecology and Management},
  volume    = {2014},
  journal   = {Forest Ecology and Management},
  number    = {334},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-7042 (Online)},
  doi       = {10.1016/j.foreco.2014.08.008},
  pages     = {96 -- 105},
  year      = {2014},
  abstract  = {Our knowledge on tree responses to drought is mainly based on short-term manipulation experiments which do not capture any possible long-term adjustments in this response. Therefore, historical water channels in inner-Alpine dry valleys were used as century-long irrigation experiments to investigate adjustments in tree growth to contrasting water supply. This involved quantifying the tree-ring growth of irrigated and non-irrigated (control) Scots pine (Pinus sylvestris L.) in Valais (Switzerland), as well as European larch (Larix decidua Mill.) and black pine (Pinus nigra Arnold) in Vinschgau (Italy). Furthermore, the adjustments in radial growth of Scots pine and European larch to an abrupt stop in irrigation were analyzed. Irrigation promoted the radial growth of all tree species investigated compared to the control: (1) directly through increased soil water availability, and (2) indirectly through increased soil nutrients and humus contents in the irrigated plots. Irrigation led to a full elimination of growth responses to climate for European larch and black pine, but not for Scots pine, which might become more sensitive to drought with increasing tree size in Valais. For the control trees, the response of the latewood increment to water availability in July/August has decreased in recent decades for all species, but increased in May for Scots pine only. The sudden irrigation stop caused a drop in radial growth to a lower level for Scots pine or similar level for larch compared to the control for up to ten years. However, both tree species were then able to adjust to the new conditions and subsequently grew with similar (Scots pine) or even higher growth rates (larch) than the control. To estimate the impact of climate change on future forest development, the duration of manipulation experiments should be on longer time scales in order to capture adjustment processes and feedback mechanisms of forest ecosystems.},
  language  = {en}
}
@article{FeichtingerEilmannBuchmannetal.2015,
  author    = {Feichtinger, Linda M. and Eilmann, Britta and Buchmann, Nina and Rigling, Andreas},
  title     = {Trait-specific responses of Scots pine to irrigation on a short vs long time scale},
  series = {Tree Physiology},
  volume    = {35},
  journal   = {Tree Physiology},
  number    = {00},
  publisher = {Heron},
  address   = {Victoria, BC},
  issn      = {1758-4469 (Online)},
  doi       = {10.1093/treephys/tpu114},
  pages     = {1 -- 12},
  year      = {2015},
  language  = {en}
}
@inproceedings{FeldhusenBrezingPuetzetal.2010,
  author    = {Feldhusen, J{\"o}rg and Brezing, Alexander Nikolaus and P{\"u}tz, Claus and W{\"a}hlisch, Georg},
  title     = {Multi-system CAD-teaching in large classes},
  series = {When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E\&PDE]},
  booktitle = {When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E\&PDE]},
  publisher = {Design Society},
  address   = {Glasgow},
  organization    = {International Conference on Engineering and Product Design Education <12, 2010, Trondheim>},
  isbn      = {978-1-904670-19-3},
  pages     = {204 -- 209},
  year      = {2010},
  language  = {en}
}
@incollection{FeldmannDoeringPyschny2016,
  author    = {Feldmann, M. and D{\"o}ring, Bernd and Pyschny, D.},
  title     = {Floor systems; Sustainabilty analyses and assessments of steel bridges},
  series = {Sustainable steel buildings : a practical guide for structures and envelopes},
  booktitle = {Sustainable steel buildings : a practical guide for structures and envelopes},
  publisher = {Wiley Blackwell},
  address   = {Chichester, West Sussex},
  isbn      = {978-1-118-74079-8 (PDF)},
  pages     = {198 -- 223},
  year      = {2016},
  language  = {en}
}
@techreport{FeldmannKuhnhenneDoeringetal.2013,
  author    = {Feldmann, M. and Kuhnhenne, M. and D{\"o}ring, Bernd and Pyschny, D. and Lawson, R.M. and Chuter, R.D. and Boudjabeur, S. and Lecomte-Labory, F. and Airaksinen, M. and Heikkinen, J. and Laamanen, J. and Albart, P. and D'Haeyer, R. and Chica, J.A. and Maseda, J.M. and Amundarain, A. and Rips, M.O. and Nu{\~n}ez, J.A. and Mac{\´i}as, O. and Beguin, P. and Ben Larbi, A.},
  title     = {Energy and thermal improvements for construction in steel (ETHICS) - EUR 26010},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-30789-8},
  issn      = {1831-9424},
  doi       = {10.2777/17106},
  pages     = {136 Seiten},
  year      = {2013},
  abstract  = {ETHICS is concerned with evaluating, measuring and making improvements in the thermal and energy performance of steel-clad and steel-framed buildings. It addresses basic building physics performance at a laboratory and full-scale level, and the preparation of design guidance for commercial, industrial and residential buildings. It includes the development of design tools to assist users in assessing whole-building performance, and calibrates these tools against whole-building measurements, which will be obtained from this research. Opportunities for renewable energy and other energy-saving features will be assessed. This project focuses on objectives that are of particular interest for the design of new steel constructions regarding energy efficiency. ETHICS investigates the as-built performance by on-site tests regarding air tightness and heat transfer properties of the building envelope and by monitoring the energy consumption and thermal comfort of selected up-to-date steel buildings. As energy efficiency is a key requirement for design and construction of buildings in the future, this project provides well-founded scientific data, which prove the high energy performance of current steel constructions and work out details for further improvements to maintain and extend the position of steel products in the construction sector.},
  language  = {en}
}
@misc{FeldmannFranckeEspeetal.2022,
  author    = {Feldmann, Marco and Francke, Gero and Espe, Clemes and Chen, Qian and Baader, Fabian and Boxberg, Marc S. and Sustrate, Anna-Marie and Kowalski, Julia and Dachwald, Bernd},
  title     = {Performance data of an ice-melting probe from field tests in two different ice environments},
  doi       = {10.5281/zenodo.6094866},
  year      = {2022},
  abstract  = {This dataset was acquired at field tests of the steerable ice-melting probe "EnEx-IceMole" (Dachwald et al., 2014). A field test in summer 2014 was used to test the melting probe's system, before the probe was shipped to Antarctica, where, in international cooperation with the MIDGE project, the objective of a sampling mission in the southern hemisphere summer 2014/2015 was to return a clean englacial sample from the subglacial brine reservoir supplying the Blood Falls at Taylor Glacier (Badgeley et al., 2017, German et al., 2021). The standardized log-files generated by the IceMole during melting operation include more than 100 operational parameters, housekeeping information, and error states, which are reported to the base station in intervals of 4 s. Occasional packet loss in data transmission resulted in a sparse number of increased sampling intervals, which where compensated for by linear interpolation during post processing. The presented dataset is based on a subset of this data: The penetration distance is calculated based on the ice screw drive encoder signal, providing the rate of rotation, and the screw's thread pitch. The melting speed is calculated from the same data, assuming the rate of rotation to be constant over one sampling interval. The contact force is calculated from the longitudinal screw force, which es measured by strain gauges. The used heating power is calculated from binary states of all heating elements, which can only be either switched on or off. Temperatures are measured at each heating element and averaged for three zones (melting head, side-wall heaters and back-plate heaters).},
  language  = {en}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@inproceedings{FeldmannPyschnyDoeringetal.2012,
  author    = {Feldmann, Markus and Pyschny, D. and D{\"o}ring, Bernd and Kuhnhenne, Markus},
  title     = {Life cycle assessment of steel constructions},
  series = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  booktitle = {Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012},
  publisher = {Taylor and Francis},
  address   = {Hoboken},
  organization    = {International Symposium on Life-Cycle Civil Engineering <3, 2012, Wien>},
  isbn      = {978-0-203-10336-4},
  pages     = {321},
  year      = {2012},
  language  = {en}
}
@inproceedings{FellinKingKirschetal.2009,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  booktitle = {Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...},
  publisher = {CRC Pr.},
  address   = {Boca Raton, Fla. [u.a.]},
  organization    = {International Conference on Structural Safety and Reliability <10, 2009, Osaka>},
  isbn      = {978-0-415-47557-0},
  pages     = {112 -- 114},
  year      = {2009},
  language  = {en}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}
@inproceedings{FendHoffschmidtReutteretal.2006,
  author    = {Fend, Thomas and Hoffschmidt, Bernhard and Reutter, Oliver and Sauerhering, J{\"o}rg and Pitz-Paal, Robert},
  title     = {Gas flow in hot porous materials: the solar air receiver and spin-off applications},
  series = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland},
  booktitle = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland},
  publisher = {ASME},
  address   = {New York, NY},
  organization    = {International Conference on Nanochannels, Microchannels and Minichannels <4, 2006, Limerick>},
  isbn      = {0-7918-4760-8},
  pages     = {507 -- 514},
  year      = {2006},
  language  = {en}
}
@article{FengSeiblerAlamietal.1999,
  author    = {Feng, Yong-Qing and Seibler, Jost and Alami, Raouf and Eisen, Andrew and Westerman, Karen A. and Leboulch, Philippe and Fiering, Steven and Bouhassira, Eric E.},
  title     = {Site-specific chromosomal integration in mammalian cells: highly efficient CRE recombinase-mediated cassette exchange},
  series = {Journal of Molecular Biology},
  volume    = {292},
  journal   = {Journal of Molecular Biology},
  number    = {4},
  issn      = {0022-2836},
  doi       = {10.1006/jmbi.1999.3113},
  pages     = {779 -- 785},
  year      = {1999},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {golog.lua: Towards a Non-Prolog Implementation of Golog for Embedded Systems},
  pages     = {20 -- 28},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {golog.lua: Towards a Non-Prolog Implementation of Golog for Embedded Systems},
  series = {Cognitive Robotics / Lakemeyer, Gerhard (ed.)},
  journal   = {Cognitive Robotics / Lakemeyer, Gerhard (ed.)},
  pages     = {1 -- 15},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2008,
  author    = {Ferrein, Alexander},
  title     = {Towards applying soccer moves in the RoboCup Standard Platform League},
  series = {{\"O}GAI-Journal},
  volume    = {Bd. 27},
  journal   = {{\"O}GAI-Journal},
  number    = {H. 3},
  organization    = {{\"O}sterreichische Gesellschaft f{\"u}r Artificial Intelligence},
  issn      = {0254-4326},
  pages     = {4 -- 9},
  year      = {2008},
  language  = {en}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  series = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2},
  journal   = {K{\"u}nstliche Intelligenz : KI. 24 (2010), H. 2},
  isbn      = {1610-1987},
  pages     = {175 -- 178},
  year      = {2010},
  language  = {en}
}
@article{Ferrein2008,
  author    = {Ferrein, Alexander},
  title     = {Logic-based robot control in highly dynamic domains / Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Robotics and Autonomous Systems. 56 (2008), H. 11},
  journal   = {Robotics and Autonomous Systems. 56 (2008), H. 11},
  isbn      = {0921-8890},
  pages     = {980 -- 991},
  year      = {2008},
  language  = {en}
}
@book{Ferrein2008,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  pages     = {XVI; 247 S. : Ill., graph. Darst},
  year      = {2008},
  language  = {en}
}
@article{Ferrein2005,
  author    = {Ferrein, Alexander},
  title     = {Specifying Soccer Moves with Golog},
  series = {Book of abstracts : Cologne, 15 - 17 September 2004 / 1st International Working Conference IT and Sport \& 5th conference DVS-Section Computer Science in Sport},
  journal   = {Book of abstracts : Cologne, 15 - 17 September 2004 / 1st International Working Conference IT and Sport \& 5th conference DVS-Section Computer Science in Sport},
  publisher = {German Sport Univ.},
  address   = {K{\"o}ln},
  isbn      = {3-00-014576-1},
  pages     = {161 -- 165},
  year      = {2005},
  language  = {en}
}
@inproceedings{Ferrein2015,
  author    = {Ferrein, Alexander},
  title     = {Robots: challenges, chances and risks for solving 21st century problems},
  series = {President's Invitation Lecture / South African Institute of Electrical Engineers : May 21 \& 22, 2015, University of Johannesburg},
  booktitle = {President's Invitation Lecture / South African Institute of Electrical Engineers : May 21 \& 22, 2015, University of Johannesburg},
  organization    = {South African Institute of Electrical Engineers},
  pages     = {1 -- 45},
  year      = {2015},
  language  = {en}
}
@article{FerreinBeckLakemeyer2007,
  author    = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {A Simulation Environment for Middle-Size Robots with Multi-level Abstraction / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RoboCup 2007: Robot Soccer World Cup XI},
  journal   = {RoboCup 2007: Robot Soccer World Cup XI},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-68846-4},
  pages     = {136 -- 147},
  year      = {2007},
  language  = {en}
}
@article{FerreinBeckLakemeyer2009,
  author    = {Ferrein, Alexander and Beck, Daniel and Lakemeyer, Gerhard},
  title     = {Landmark-Based Representations for Navigating Holonomic Soccer Robots / Beck, Daniel ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  journal   = {RoboCup 2008 : robot soccer world cup XII / Luca Iocchi ... (eds.)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-642-02921-9},
  pages     = {25 -- 36},
  year      = {2009},
  language  = {en}
}
@inproceedings{FerreinBharatheeshaSchifferetal.2019,
  author    = {Ferrein, Alexander and Bharatheesha, Mukunda and Schiffer, Stefan and Corbato, Carlos Hernandez},
  title     = {TRROS 2018 : Teaching Robotics with ROS Workshop at ERF 2018; Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018},
  series = {CEUR Workshop Proceedings},
  booktitle = {CEUR Workshop Proceedings},
  number    = {Vol-2329},
  issn      = {1613-0073},
  pages     = {68 Seiten},
  year      = {2019},
  language  = {en}
}
@article{FerreinBoehnstedtLakemeyer2007,
  author    = {Ferrein, Alexander and B{\"o}hnstedt, Lutz and Lakemeyer, Gerhard},
  title     = {Options in readylog reloaded -- generating decision-theoretic plan libraries in golog / B{\"o}hnstedt, Lutz ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {KI 2007: advances in artificial intelligence : 30th Annual German Conference on AI, KI 2007, Osnabr{\"u}ck, Germany, September 10 - 13, 2007 ; proceedings},
  journal   = {KI 2007: advances in artificial intelligence : 30th Annual German Conference on AI, KI 2007, Osnabr{\"u}ck, Germany, September 10 - 13, 2007 ; proceedings},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-74564-8},
  pages     = {352 -- 366},
  year      = {2007},
  language  = {en}
}
@article{FerreinDyllaLakemeyer2003,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard},
  title     = {Specifying Multirobot Coordination in ICPGolog - From Simulation towards Real Robots / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  pages     = {1 -- 10},
  year      = {2003},
  language  = {en}
}
@article{FerreinDyllaLakemeyer2002,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard},
  title     = {Acting and Deliberating using Golog in Robotic Soccer - A Hybrid Architecture / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)},
  journal   = {Proc. 3rd International Cognitive Robotics Workshop (CogRob 2002)},
  pages     = {1 -- 7},
  year      = {2002},
  language  = {en}
}
@article{FerreinDyllaLakemeyeretal.2008,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan},
  title     = {Approaching a formal soccer theory from behaviour specifications in robotic soccer / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Schiffer, Stefan ; Stolzenburg, Frieder ; Visser, Ubbo ; Wagner, Tho},
  series = {Computers in sport / editors: P Dabnichki},
  journal   = {Computers in sport / editors: P Dabnichki},
  publisher = {WIT Press},
  address   = {Southampton},
  isbn      = {978-1-8456-4064-4},
  pages     = {161 -- 185},
  year      = {2008},
  language  = {en}
}
@article{FerreinDyllaLakemeyeretal.2005,
  author    = {Ferrein, Alexander and Dylla, Frank and Lakemeyer, Gerhard and Murray, Jan},
  title     = {Towards a League-Independent Qualitative Soccer Theory for RoboCup / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; R{\"o}fer, Thomas ; Stolzenburg, Frieder ; Visser, Ubbo},
  series = {RoboCup 2004: Robot Soccer World Cup VIII / Daniele Nardi ... (ed.).},
  journal   = {RoboCup 2004: Robot Soccer World Cup VIII / Daniele Nardi ... (ed.).},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-25046-8},
  pages     = {611 -- 618},
  year      = {2005},
  language  = {en}
}
@article{FerreinFritzLakemeyer2004,
  author    = {Ferrein, Alexander and Fritz, Christian and Lakemeyer, Gerhard},
  title     = {On-Line Decision-Theoretic Golog for Unpredictable Domains / Ferrein, Alexander ; Fritz, Christian ; Lakemeyer, Gerhard},
  series = {KI 2004: Advances in Artificial Intelligence : 27th Annual German Conference on AI, KI 2004, Ulm, Germany, September 20-24, 2004. Proceedings},
  journal   = {KI 2004: Advances in Artificial Intelligence : 27th Annual German Conference on AI, KI 2004, Ulm, Germany, September 20-24, 2004. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {322 -- 336},
  year      = {2004},
  language  = {en}
}
@article{FerreinFritzLakemeyer2005,
  author    = {Ferrein, Alexander and Fritz, Christian and Lakemeyer, Gerhard},
  title     = {Using Golog for Deliberation and Team Coordination in Robotic Soccer / Ferrein, Alexander ; Fritz, Christian ; Lakemeyer, Gerhard},
  series = {K{\"u}nstliche Intelligenz : KI. 19 (2005), H. 1},
  journal   = {K{\"u}nstliche Intelligenz : KI. 19 (2005), H. 1},
  isbn      = {0933-1875},
  pages     = {24 -- 30},
  year      = {2005},
  language  = {en}
}
@article{FerreinFritzLakemeyer2003,
  author    = {Ferrein, Alexander and Fritz, Christian and Lakemeyer, Gerhard},
  title     = {Extending DTGOLOG with Options / Ferrein, Alexander ; Fritz, Christian ; Lakemeyer, Gerhard},
  series = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  journal   = {IJCAI-03, Proceedings of the Eighteenth International Joint Conference on Artificial Intelligence, Acapulco, Mexico, August 9-15, 2003},
  pages     = {1391 -- 1393},
  year      = {2003},
  language  = {en}
}
@article{FerreinHermannsLakemeyer2006,
  author    = {Ferrein, Alexander and Hermanns, Lutz and Lakemeyer, Gerhard},
  title     = {Comparing Sensor Fusion Techniques for Ball Position Estimation / Ferrein, Alexander ; Hermanns, Lutz ; Lakemeyer, Gerhard},
  series = {RoboCup 2005: Robot Soccer World Cup IX},
  journal   = {RoboCup 2005: Robot Soccer World Cup IX},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-35437-6},
  pages     = {154 -- 165},
  year      = {2006},
  language  = {en}
}
@article{FerreinJacobsLakemeyer2005,
  author    = {Ferrein, Alexander and Jacobs, Stefan and Lakemeyer, Gerhard},
  title     = {Controlling Unreal Tournament 2004 Bots with the logic-based action language Golog / Jacobs, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {Proceedings of the First AAAI Conference on Artificial Intelligence and Interactive Digital Entertainment (AIIDE).},
  journal   = {Proceedings of the First AAAI Conference on Artificial Intelligence and Interactive Digital Entertainment (AIIDE).},
  pages     = {151 -- 152},
  year      = {2005},
  language  = {en}
}
@article{FerreinJacobsLakemeyer2005,
  author    = {Ferrein, Alexander and Jacobs, Stefan and Lakemeyer, Gerhard},
  title     = {Unreal Golog Bots / Jacobs, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {IJCAI-05 Workshop on Reasoning, Representation, and Learning in Computer Games},
  journal   = {IJCAI-05 Workshop on Reasoning, Representation, and Learning in Computer Games},
  pages     = {31 -- 36},
  year      = {2005},
  language  = {en}
}
@article{FerreinJacobsSchifferetal.2009,
  author    = {Ferrein, Alexander and Jacobs, Stefan and Schiffer, Stefan and Beck, Daniel},
  title     = {Robust Collision Avoidance in Unknown Domestic Environments / Jacobs, Stefan ; Ferrein, Alexander ; Schiffer, Stefan ; Beck, Daniel ; Lakemeyer, Gerhard},
  series = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII},
  journal   = {ROBOCUP 2009: ROBOT SOCCER WORLD CUP XIII},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {116 -- 127},
  year      = {2009},
  language  = {en}
}
@inproceedings{FerreinKallweitLautermann2012,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark},
  title     = {Towards an autonomous pilot system for a tunnel boring machine},
  series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {978-1-4673-5183-6},
  year      = {2012},
  language  = {en}
}
@inproceedings{FerreinKallweitScholletal.2015,
  author    = {Ferrein, Alexander and Kallweit, Stephan and Scholl, Ingrid and Reichert, Walter},
  title     = {Learning to Program Mobile Robots in the ROS Summer School Series},
  series = {Proceedings 6th International Conference on Robotics in Education (RiE 15)},
  booktitle = {Proceedings 6th International Conference on Robotics in Education (RiE 15)},
  pages     = {6 S.},
  year      = {2015},
  abstract  = {The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.},
  language  = {en}
}
@article{FerreinKonurLakemeyer2004,
  author    = {Ferrein, Alexander and Konur, Savas and Lakemeyer, Gerhard},
  title     = {Learning Decision Trees for Action Selection in Soccer Agents / Konur, Savas ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  pages     = {1 -- 7},
  year      = {2004},
  language  = {en}
}
@inproceedings{FerreinLakemeyerSchiffer2006,
  author    = {Ferrein, Alexander and Lakemeyer, Gerhard and Schiffer, Stefan},
  title     = {AllemaniACs@ home 2006 team description},
  pages     = {1 -- 6},
  year      = {2006},
  language  = {en}
}
@inproceedings{FerreinMaierMuehlbacheretal.2015,
  author    = {Ferrein, Alexander and Maier, Christopher and M{\"u}hlbacher, Clemens and Niemueller, Tim and Steinbauer, Gerald and Vassos, Stravros},
  title     = {Controlling Logistics Robots with the Action-based Language YAGI},
  series = {Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing},
  booktitle = {Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing},
  year      = {2015},
  language  = {en}
}
@inproceedings{FerreinMaierMuehlbacheretal.2016,
  author    = {Ferrein, Alexander and Maier, Christopher and M{\"u}hlbacher, Clemens and Niem{\"u}ller, Tim and Steinbauer, Gerald and Vassos, Stravros},
  title     = {Controlling logistics robots with the action-based language YAGI},
  series = {Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I},
  volume    = {9834},
  booktitle = {Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I},
  publisher = {Springer},
  isbn      = {978-3-319-43505-3 (Print)},
  doi       = {10.1007/978-3-319-43506-0_46},
  pages     = {525 -- 537},
  year      = {2016},
  language  = {en}
}
@article{FerreinMaraisPotgieteretal.2011,
  author    = {Ferrein, Alexander and Marais, Stephen and Potgieter, Anet and Steinbauer, Gerald},
  title     = {RoboCup Junior: A vehicle for S\&T education in Africa?},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-61284-992-8},
  pages     = {1 -- 6},
  year      = {2011},
  language  = {en}
}
@inproceedings{FerreinMeessenLimpertetal.2021,
  author    = {Ferrein, Alexander and Meeßen, Marcus and Limpert, Nicolas and Schiffer, Stefan},
  title     = {Compiling ROS schooling curricula via contentual taxonomies},
  series = {Robotics in Education},
  booktitle = {Robotics in Education},
  editor    = {Lepuschitz, Wilfried},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-67411-3},
  doi       = {10.1007/978-3-030-67411-3_5},
  pages     = {49 -- 60},
  year      = {2021},
  abstract  = {The Robot Operating System (ROS) is the current de-facto standard in robot middlewares. The steadily increasing size of the user base results in a greater demand for training as well. User groups range from students in academia to industry professionals with a broad spectrum of developers in between. To deliver high quality training and education to any of these audiences, educators need to tailor individual curricula for any such training. In this paper, we present an approach to ease compiling curricula for ROS trainings based on a taxonomy of the teaching contents. The instructor can select a set of dedicated learning units and the system will automatically compile the teaching material based on the dependencies of the units selected and a set of parameters for a particular training. We walk through an example training to illustrate our work.},
  language  = {en}
}
@article{FerreinMeyer2012,
  author    = {Ferrein, Alexander and Meyer, Thomas},
  title     = {A Brief Overview of Artificial Intelligence in South Africa},
  series = {AI Magazine},
  volume    = {33},
  journal   = {AI Magazine},
  number    = {1},
  publisher = {AAAI},
  address   = {Menlo Park},
  issn      = {0738-4602},
  doi       = {10.1609/aimag.v33i1.2357},
  pages     = {99 -- 101},
  year      = {2012},
  abstract  = {South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.},
  language  = {en}
}
@article{FerreinMiesLakemeyer2008,
  author    = {Ferrein, Alexander and Mies, Christoph and Lakemeyer, Gerhard},
  title     = {Repairing Decision-Theoretic Policies Using Goal-Oriented Planning / Mies, Christoph ; Ferrein, Alexander ; Lakemeyer, Gerhard},
  series = {KI 2008: Advances in Artificial Intelligence : 31st Annual German Conference on AI, KI 2008, Kaiserslautern, Germany, September 23-26, 2008. Proceedings},
  journal   = {KI 2008: Advances in Artificial Intelligence : 31st Annual German Conference on AI, KI 2008, Kaiserslautern, Germany, September 23-26, 2008. Proceedings},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-85844-7},
  pages     = {267 -- 275},
  year      = {2008},
  language  = {en}
}
@inproceedings{FerreinNiemuellerSchifferetal.2013,
  author    = {Ferrein, Alexander and Niem{\"u}ller, Tim and Schiffer, Stefan and Lakemeyer, Gerhard},
  title     = {Lessons learnt from developing the embodied AI platform CAESAR for domestic service robotics},
  series = {Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)},
  booktitle = {Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)},
  editor    = {Boots, Byron},
  organization    = {American Association for Artificial Intelligence},
  isbn      = {9781577356011},
  pages     = {21 -- 26},
  year      = {2013},
  language  = {en}
}