@incollection{Finkenberger2022,
  author    = {Finkenberger, Isabel Maria},
  title     = {R{\"a}umliche Transformation als Planungsaufgabe},
  series = {Zur{\"u}ck in die Zukunft. Denkmalpflege und Strukturwandel im Rheinischen Revier},
  booktitle = {Zur{\"u}ck in die Zukunft. Denkmalpflege und Strukturwandel im Rheinischen Revier},
  editor    = {Pufke, Andrea},
  publisher = {LVR-Amt f{\"u}r Denkmalpflege im Rheinland},
  address   = {Pulheim},
  pages     = {70 -- 77},
  year      = {2022},
  language  = {de}
}
@inproceedings{LangohrBungCrookston2022,
  author    = {Langohr, Philipp and Bung, Daniel Bernhard and Crookston, Brian M.},
  title     = {Hybrid investigation of labyrinth weirs: Discharge capacity and energy dissipation},
  series = {Proceedings of the 39th IAHR World Congress},
  booktitle = {Proceedings of the 39th IAHR World Congress},
  editor    = {Ortega-S{\´a}nchez, Miguel},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  isbn      = {978-90-832612-1-8},
  issn      = {2521-7119 (print)},
  doi       = {10.3850/IAHR-39WC252171192022738},
  pages     = {2313 -- 2318},
  year      = {2022},
  abstract  = {The replacement of existing spillway crests or gates with labyrinth weirs is a proven techno-economical means to increase the discharge capacity when rehabilitating existing structures. However, additional information is needed regarding energy dissipation of such weirs, since due to the folded weir crest, a three-dimensional flow field is generated, yielding more complex overflow and energy dissipation processes. In this study, CFD simulations of labyrinth weirs were conducted 1) to analyze the discharge coefficients for different discharges to compare the Cd values to literature data and 2) to analyze and improve energy dissipation downstream of the structure. All tests were performed for a structure at laboratory scale with a height of approx. P = 30.5 cm, a ratio of the total crest length to the total width of 4.7, a sidewall angle of 10° and a quarter-round weir crest shape. Tested headwater ratios were 0.089 ≤ HT/P ≤ 0.817. For numerical simulations, FLOW-3D Hydro was employed, solving the RANS equations with use of finite-volume method and RNG k-ε turbulence closure. In terms of discharge capacity, results were compared to data from physical model tests performed at the Utah Water Research Laboratory (Utah State University), emphasizing higher discharge coefficients from CFD than from the physical model. For upstream heads, some discrepancy in the range of ± 1 cm between literature, CFD and physical model tests was identified with a discussion regarding differences included in the manuscript. For downstream energy dissipation, variable tailwater depths were considered to analyze the formation and sweep-out of a hydraulic jump. It was found that even for high discharges, relatively low downstream Froude numbers were obtained due to high energy dissipation involved by the three-dimensional flow between the sidewalls. The effects of some additional energy dissipation devices, e.g. baffle blocks or end sills, were also analyzed. End sills were found to be non-effective. However, baffle blocks with different locations may improve energy dissipation downstream of labyrinth weirs.},
  language  = {en}
}
@inproceedings{CrookstonBung2022,
  author    = {Crookston, Brian M. and Bung, Daniel Bernhard},
  title     = {Application of RGB-D cameras in hydraulic laboratory studies},
  series = {Proceedings of the 39th IAHR World Congress},
  booktitle = {Proceedings of the 39th IAHR World Congress},
  editor    = {Ortega-S{\´a}nchez, Miguel},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  isbn      = {978-90-832612-1-8},
  issn      = {2521-7119 (print)},
  doi       = {10.3850/IAHR-39WC252171192022964},
  pages     = {5127 -- 5133},
  year      = {2022},
  abstract  = {Non-intrusive measuring techniques have attained a lot of interest in relation to both hydraulic modeling and prototype applications. Complimenting acoustic techniques, significant progress has been made for the development of new optical methods. Computer vision techniques can help to extract new information, e. g. high-resolution velocity and depth data, from videos captured with relatively inexpensive, consumer-grade cameras. Depth cameras are sensors providing information on the distance between the camera and observed features. Currently, sensors with different working principles are available. Stereoscopic systems reference physical image features (passive system) from two perspectives; in order to enhance the number of features and improve the results, a sensor may also estimate the disparity from a detected light to its original projection (active stereo system). In the current study, the RGB-D camera Intel RealSense D435, working on such stereo vision principle, is used in different, typical hydraulic modeling applications. All tests have been conducted at the Utah Water Research Laboratory. This paper will demonstrate the performance and limitations of the RGB-D sensor, installed as a single camera and as camera arrays, applied to 1) detect the free surface for highly turbulent, aerated hydraulic jumps, for free-falling jets and for an energy dissipation basin downstream of a labyrinth weir and 2) to monitor local scours upstream and downstream of a Piano Key Weir. It is intended to share the authors' experiences with respect to camera settings, calibration, lightning conditions and other requirements in order to promote this useful, easily accessible device. Results will be compared to data from classical instrumentation and the literature. It will be shown that even in difficult application, e. g. the detection of a highly turbulent, fluctuating free-surface, the RGB-D sensor may yield similar accuracy as classical, intrusive probes.},
  language  = {en}
}
@inproceedings{TranTrinhDaoetal.2022,
  author    = {Tran, Ngoc Trinh and Trinh, Tu Luc and Dao, Ngoc Tien and Giap, Van Tan and Truong, Manh Khuyen and Dinh, Thuy Ha and Staat, Manfred},
  title     = {Limit and shakedown analysis of structures under random strength},
  series = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  booktitle = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  publisher = {Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)},
  address   = {Hanoi},
  isbn      = {978-604-357-084-7},
  pages     = {510 -- 518},
  year      = {2022},
  abstract  = {Direct methods comprising limit and shakedown analysis is a branch of computational mechanics. It plays a significant role in mechanical and civil engineering design. The concept of direct method aims to determinate the ultimate load bearing capacity of structures beyond the elastic range. For practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and onstraints. If strength and loading are random quantities, the problem of shakedown analysis is considered as stochastic programming. This paper presents a method so called chance constrained programming, an effective method of stochastic programming, to solve shakedown analysis problem under random condition of strength. In this our investigation, the loading is deterministic, the strength is distributed as normal or lognormal variables.},
  language  = {en}
}
@misc{KeimerGirbigMayntzetal.2022,
  author    = {Keimer, Jona and Girbig, Leo and Mayntz, Joscha and Tegtmeyer, Philipp and Wendland, Frederik and Dahman, Peter and Fisher, Alex and Dorrington, Graham},
  title     = {Flight mission optimization for eco-efficiency in consideration of electric regeneration and atmospheric conditions},
  series = {AIAA AVIATION 2022 Forum},
  journal   = {AIAA AVIATION 2022 Forum},
  publisher = {AIAA},
  address   = {Reston, Va.},
  doi       = {10.2514/6.2022-4118},
  year      = {2022},
  abstract  = {The development and operation of hybrid or purely electrically powered aircraft in regional air mobility is a significant challenge for the entire aviation sector. This technology is expected to lead to substantial advances in flight performance, energy efficiency, reliability, safety, noise reduction, and exhaust emissions. Nevertheless, any consumed energy results in heat or carbon dioxide emissions and limited electric energy storage capabilities suppress commercial use. Therefore, the significant challenges to achieving eco-efficient aviation are increased aircraft efficiency, the development of new energy storage technologies, and the optimization of flight operations. Two major approaches for higher eco-efficiency are identified: The first one, is to take horizontal and vertical atmospheric motion phenomena into account. Where, in particular, atmospheric waves hold exciting potential. The second one is the use of the regeneration ability of electric aircraft. The fusion of both strategies is expected to improve efficiency. The objective is to reduce energy consumption during flight while not neglecting commercial usability and convenient flight characteristics. Therefore, an optimized control problem based on a general aviation class aircraft has to be developed and validated by flight experiments. The formulated approach enables a development of detailed knowledge of the potential and limitations of optimizing flight missions, considering the capability of regeneration and atmospheric influences to increase efficiency and range.},
  language  = {en}
}
@article{AkimbekovDigelTastambeketal.2022,
  author    = {Akimbekov, Nuraly S. and Digel, Ilya and Tastambek, Kuanysh T. and Marat, Adel K. and Turaliyeva, Moldir A. and Kaiyrmanova, Gulzhan K.},
  title     = {Biotechnology of Microorganisms from Coal Environments: From Environmental Remediation to Energy Production},
  series = {Biology},
  volume    = {11},
  journal   = {Biology},
  number    = {9},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-7737},
  doi       = {10.3390/biology11091306},
  pages     = {47 Seiten},
  year      = {2022},
  abstract  = {It was generally believed that coal sources are not favorable as live-in habitats for microorganisms due to their recalcitrant chemical nature and negligible decomposition. However, accumulating evidence has revealed the presence of diverse microbial groups in coal environments and their significant metabolic role in coal biogeochemical dynamics and ecosystem functioning. The high oxygen content, organic fractions, and lignin-like structures of lower-rank coals may provide effective means for microbial attack, still representing a greatly unexplored frontier in microbiology. Coal degradation/conversion technology by native bacterial and fungal species has great potential in agricultural development, chemical industry production, and environmental rehabilitation. Furthermore, native microalgal species can offer a sustainable energy source and an excellent bioremediation strategy applicable to coal spill/seam waters. Additionally, the measures of the fate of the microbial community would serve as an indicator of restoration progress on post-coal-mining sites. This review puts forward a comprehensive vision of coal biodegradation and bioprocessing by microorganisms native to coal environments for determining their biotechnological potential and possible applications.},
  language  = {en}
}
@misc{KrafftKukaUlberetal.2022,
  author    = {Krafft, Simone and Kuka, Katrin and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Utilization of Lolium perenne varieties as a renewable substrate for single-cell proteins, lactate, and composite materials},
  series = {Chemie Ingenieur Technik},
  volume    = {94},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.202255306},
  pages     = {1303 -- 1304},
  year      = {2022},
  abstract  = {Lolium perenne (perennial ryegrass) is aproductive and high-quality forage grass indigenous to Southern Europe, temperate Asia, and North Africa. Nowadays it is widespread and the dominant grass species on green areas in temperate climates. This abundant source of biomass is suitable for the development of bioeconomic processes because of its high cellulose and water-soluble carbohydrate content. In this work, novel breeds of the perennial ryegrass are being examined with regards to their quality parameters and biotechnological utilization options within the context of bioeconomy. Three processing operations are presented. In the first process, the perennial ryegrass is pretreated by pressing or hydrothermal extraction to derive glucosevia subsequent enzymatic hydrolysis of cellulose. A yield of up to 82 \% glucose was achieved when using the hydrothermal ex-traction as pretreatment. In a second process, the ryegrass is used to produce lactic acid in high concentrations. The influence of the growth conditions and the cutting time on the carboxylic acid yield is investigated. A yield of lactic acid of above 150 g kg⁻¹ dry matter was achieved. The third process is to use Lolium perenne as a substrate in the fermentation of K. marxianus for the microbial production of single-cell proteins. The perennial ryegrass is screw-pressed and the press juice is used as medium. When supplementing the press juice with yeast media components, a biomass concentration of up to 16 g L⁻¹ could be achieved.},
  language  = {en}
}
@misc{TopcuMadabhushiStaat2022,
  author    = {Topcu, Murat and Madabhushi, Gopal Santana Phani and Staat, Manfred},
  title     = {Datasets from FEM Simulations done with COMSOL Multiphysics and Code_Aster},
  doi       = {10.6084/m9.figshare.19333295.v2},
  year      = {2022},
  abstract  = {Datasets from FEM Simulations done with COMSOL Multiphysics and Code_Aster for an elastic stress transfer between matrix and fibres having a variable radius.},
  language  = {en}
}
@article{ThiebesKleinZingsheimetal.2022,
  author    = {Thiebes, Anja Lena and Klein, Sarah and Zingsheim, Jonas and M{\"o}ller, Georg H. and G{\"u}rzing, Stefanie and Reddemann, Manuel A. and Behbahani, Mehdi and Cornelissen, Christian G.},
  title     = {Effervescent atomizer as novel cell spray technology to decrease the gas-to-liquid ratio},
  series = {pharmaceutics},
  volume    = {14},
  journal   = {pharmaceutics},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/pharmaceutics14112421},
  pages     = {Artikel 2421},
  year      = {2022},
  abstract  = {Cell spraying has become a feasible application method for cell therapy and tissue engineering approaches. Different devices have been used with varying success. Often, twin-fluid atomizers are used, which require a high gas velocity for optimal aerosolization characteristics. To decrease the amount and velocity of required air, a custom-made atomizer was designed based on the effervescent principle. Different designs were evaluated regarding spray characteristics and their influence on human adipose-derived mesenchymal stromal cells. The arithmetic mean diameters of the droplets were 15.4-33.5 µm with decreasing diameters for increasing gas-to-liquid ratios. The survival rate was >90\% of the control for the lowest gas-to-liquid ratio. For higher ratios, cell survival decreased to approximately 50\%. Further experiments were performed with the design, which had shown the highest survival rates. After seven days, no significant differences in metabolic activity were observed. The apoptosis rates were not influenced by aerosolization, while high gas-to-liquid ratios caused increased necrosis levels. Tri-lineage differentiation potential into adipocytes, chondrocytes, and osteoblasts was not negatively influenced by aerosolization. Thus, the effervescent aerosolization principle was proven suitable for cell applications requiring reduced amounts of supplied air. This is the first time an effervescent atomizer was used for cell processing.},
  language  = {en}
}
@inproceedings{VeettilRakshitSchopenetal.2022,
  author    = {Veettil, Yadu Krishna Morassery and Rakshit, Shantam and Schopen, Oliver and Kemper, Hans and Esch, Thomas and Shabani, Bahman},
  title     = {Automated Control System Strategies to Ensure Safety of PEM Fuel Cells Using Kalman Filters},
  series = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  booktitle = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  editor    = {Bin Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Singh, Amrik Singh Phuman and Munir, Fudhail Abdul and Ibrahim, Asriana},
  publisher = {Springer Nature},
  address   = {Singapore},
  isbn      = {978-981-19-3178-9},
  issn      = {2195-4356},
  doi       = {10.1007/978-981-19-3179-6_55},
  pages     = {296 -- 299},
  year      = {2022},
  abstract  = {Having well-defined control strategies for fuel cells, that can efficiently detect errors and take corrective action is critically important for safety in all applications, and especially so in aviation. The algorithms not only ensure operator safety by monitoring the fuel cell and connected components, but also contribute to extending the health of the fuel cell, its durability and safe operation over its lifetime. While sensors are used to provide peripheral data surrounding the fuel cell, the internal states of the fuel cell cannot be directly measured. To overcome this restriction, Kalman Filter has been implemented as an internal state observer. Other safety conditions are evaluated using real-time data from every connected sensor and corrective actions automatically take place to ensure safety. The algorithms discussed in this paper have been validated thorough Model-in-the-Loop (MiL) tests as well as practical validation at a dedicated test bench.},
  language  = {en}
}
@book{Laack2022,
  author    = {Laack, Walter van},
  title     = {Greater Than the Entire Universe},
  publisher = {van Laack GmbH},
  address   = {Aachen},
  isbn      = {978-3-936624-52-6},
  pages     = {120 Seiten},
  year      = {2022},
  language  = {en}
}
@inproceedings{TamaldinMansorMatYaminetal.2022,
  author    = {Tamaldin, Noreffendy and Mansor, Muhd Rizuan and Mat Yamin, Ahmad Kamal and Bin Abdollah, Mohd Fazli and Esch, Thomas and Tonoli, Andrea and Reisinger, Karl Heinz and Sprenger, Hanna and Razuli, Hisham},
  title     = {Development of UTeM United Future Fuel Design Training Center Under Erasmus+ United Program},
  series = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  booktitle = {Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia},
  editor    = {Bin Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Singh, Amrik Singh Phuman and Munir, Fudhail Abdul and Ibrahim, Asriana},
  publisher = {Springer Nature},
  address   = {Singapore},
  isbn      = {978-981-19-3178-9},
  issn      = {2195-4356},
  doi       = {10.1007/978-981-19-3179-6_50},
  pages     = {274 -- 278},
  year      = {2022},
  abstract  = {The industrial revolution IR4.0 era have driven many states of the art technologies to be introduced especially in the automotive industry. The rapid development of automotive industries in Europe have created wide industry gap between European Union (EU) and developing countries such as in South-East Asia (SEA). Indulging this situation, FH Joanneum, Austria together with European partners from FH Aachen, Germany and Politecnico Di Torino, Italy is taking initiative to close the gap utilizing the Erasmus+ United grant from EU. A consortium was founded to engage with automotive technology transfer using the European ramework to Malaysian, Indonesian and Thailand Higher Education Institutions (HEI) as well as automotive industries. This could be achieved by establishing Engineering Knowledge Transfer Unit (EKTU) in respective SEA institutions guided by the industry partners in their respective countries. This EKTU could offer updated, innovative, and high-quality training courses to increase graduate's employability in higher education institutions and strengthen relations between HEI and the wider economic and social environment by addressing Universityindustry cooperation which is the regional priority for Asia. It is expected that, the Capacity Building Initiative would improve the quality of higher education and enhancing its relevance for the labor market and society in the SEA partners. The outcome of this project would greatly benefit the partners in strong and complementary partnership targeting the automotive industry and enhanced larger scale international cooperation between the European and SEA partners. It would also prepare the SEA HEI in sustainable partnership with Automotive industry in the region as a mean of income generation in the future.},
  language  = {en}
}
@inproceedings{StaatTran2022,
  author    = {Staat, Manfred and Tran, Ngoc Trinh},
  title     = {Strain based brittle failure criteria for rocks},
  series = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  booktitle = {Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training},
  publisher = {Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)},
  address   = {Hanoi},
  isbn      = {978-604-357-084-7},
  pages     = {500 -- 509},
  year      = {2022},
  abstract  = {When confining pressure is low or absent, extensional fractures are typical, with fractures occurring on unloaded planes in rock. These "paradox" fractures can be explained by a phenomenological extension strain failure criterion. In the past, a simple empirical criterion for fracture initiation in brittle rock has been developed. But this criterion makes unrealistic strength predictions in biaxial compression and tension. A new extension strain criterion overcomes this limitation by adding a weighted principal shear component. The weight is chosen, such that the enriched extension strain criterion represents the same failure surface as the Mohr-Coulomb (MC) criterion. Thus, the MC criterion has been derived as an extension strain criterion predicting failure modes, which are unexpected in the understanding of the failure of cohesive-frictional materials. In progressive damage of rock, the most likely fracture direction is orthogonal to the maximum extension strain. The enriched extension strain criterion is proposed as a threshold surface for crack initiation CI and crack damage CD and as a failure surface at peak P. Examples show that the enriched extension strain criterion predicts much lower volumes of damaged rock mass compared to the simple extension strain criterion.},
  language  = {en}
}
@article{Timme2022,
  author    = {Timme, Michael},
  title     = {Beweislast beim gutgl{\"a}ubigen Erwerb eines Kraftfahrzeugs ohne Erhalt der Zulassungsbescheinigung Teil II — Zugleich eine Besprechung von BGH, Urt. v. 23.9.2022 - V ZR 148/21, MDR 2022, 1542},
  series = {Monatsschrift f{\"u}r Deutsches Recht},
  volume    = {77},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht},
  number    = {1},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  doi       = {doi.org/10.9785/mdtr-2023-770102},
  pages     = {r5 -- r7},
  year      = {2022},
  abstract  = {Im Handel mit Kraftfahrzeugen geh{\"o}ren Aspekte des gutgl{\"a}ubigen Erwerbs zu den beinahe allt{\"a}glichen Standardproblemen. Der BGH f{\"u}gt in seiner Entscheidung v. 23.9.2022-VZR148/21, MDR 2022, 1541 diesem im Detail breit gef{\"a}cherten Themenfeld einen weiteren Mosaikstein hinzu: Der Erwerber erhielt das verkaufte Kfz ohne {\"U}bergabe einer Zulassungsbescheinigung Teil II, behauptet aber, diese Bescheinigung sei dem vom ihm eingeschalteten Vermittler bei Erwerb (als F{\"a}lschung) vorgelegt worden. Tats{\"a}chlich befand sich das Original durchg{\"a}ngig beim wahren Eigent{\"u}mer, der nunmehr Herausgabe des Fahrzeugs verlangt. Der BGH sch{\"u}tzt in dieser Gestaltung im Ergebnis den Erwerber. Die Entscheidung ist in mehrfacher Hinsicht bemerkenswert.},
  language  = {de}
}
@article{KahmannRauschPluemeretal.2022,
  author    = {Kahmann, Stephanie L. and Rausch, Valentin and Pl{\"u}mer, Jonathan and M{\"u}ller, Lars P. and Pieper, Martin and Wegmann, Kilian},
  title     = {The automized fracture edge detection and generation of three-dimensional fracture probability heat maps},
  series = {Medical Engineering \& Physics},
  volume    = {2022},
  journal   = {Medical Engineering \& Physics},
  number    = {110},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {With proven impact of statistical fracture analysis on fracture classifications, it is desirable to minimize the manual work and to maximize repeatability of this approach. We address this with an algorithm that reduces the manual effort to segmentation, fragment identification and reduction. The fracture edge detection and heat map generation are performed automatically. With the same input, the algorithm always delivers the same output. The tool transforms one intact template consecutively onto each fractured specimen by linear least square optimization, detects the fragment edges in the template and then superimposes them to generate a fracture probability heat map. We hypothesized that the algorithm runs faster than the manual evaluation and with low (< 5 mm) deviation. We tested the hypothesis in 10 fractured proximal humeri and found that it performs with good accuracy (2.5 mm ± 2.4 mm averaged Euclidean distance) and speed (23 times faster). When applied to a distal humerus, a tibia plateau, and a scaphoid fracture, the run times were low (1-2 min), and the detected edges correct by visual judgement. In the geometrically complex acetabulum, at a run time of 78 min some outliers were considered acceptable. An automatically generated fracture probability heat map based on 50 proximal humerus fractures matches the areas of high risk of fracture reported in medical literature. Such automation of the fracture analysis method is advantageous and could be extended to reduce the manual effort even further.},
  language  = {en}
}
@masterthesis{Lebrecht2022,
  type      = {Bachelor Thesis},
  author    = {Lebrecht, Rike-Charlotte},
  title     = {Inga : ein modulares hydroponisches System f{\"u}r Endverbraucher},
  publisher = {FH Aachen},
  address   = {Aachen},
  year      = {2022},
  abstract  = {In dieser Arbeit wurde sich mit der Frage auseinandergesetzt, wie sich der Nahrungsmittelanbau im urbanen Raum entwickeln k{\"o}nnte. Eine spannende Alternative zu traditionellen Anbaumethoden ist die Hydroponik, der Anbau von Pflanzen ohne Erde. Basierend auf dieser Technologie wurde in diesem Projekt ein Indoor-Garden-System gestaltet, welches den Nahrungsmittelanbau zur{\"u}ck zur Verbraucher:In bringt und zu einem bewussteren Umgang mit Lebensmitteln anregen soll. Denn mit „INGA" kann frisches, pestizidfreies Blattgem{\"u}se ganz einfach zu Hause selbst angebaut werden. Das hydroponische System schafft mithilfe einer N{\"a}hrstoffl{\"o}sung und k{\"u}nstlichem Licht optimale Wachstumsbedingungen f{\"u}r die Pflanzen - ganz unabh{\"a}ngig von {\"o}rtlichen Gegebenheiten. Mithilfe seiner Modularit{\"a}t k{\"o}nnen Nutzer:Innen „INGA" nach Belieben konfigurieren. Damit wird es einer breiten Zielgruppe mit unterschiedlichen Bed{\"u}rfnissen gerecht und erm{\"o}glicht pestizidfreie Nahrung - auch in den St{\"a}dten.},
  language  = {de}
}
@masterthesis{Menrath2022,
  type      = {Bachelor Thesis},
  author    = {Menrath, Maike},
  title     = {Konzept zur Lebensmittelnahversorgung außerhalb urbaner Strukturen : Verkaufspunkt f{\"u}r l{\"a}ndliche Gebiete},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {131 Seiten},
  year      = {2022},
  abstract  = {L{\"a}ndliche Regionen sind h{\"a}ufig infrastrukturell schlechter versorgt als urbane R{\"a}ume, was sich insbesondere auf die Versorgung mit G{\"u}tern des t{\"a}glichen Bedarfs niederschl{\"a}gt. Menschen außerhalb st{\"a}dtischer Ballungsgebiete m{\"u}ssen deswegen oft lange Anfahrten zu Superm{\"a}rkten in Kauf nehmen. Hierbei sind sie vor allem auf das Auto angewiesen. In dieser Arbeit ist „ILSE" entstanden. Eine Verkaufsbox, die Menschen in l{\"a}ndlichen Raumstrukturen besser mit Waren versorgt, indem sie dort aufgestellt wird, wo sie auch wirklich ben{\"o}tigt wird. Dank digitaler Verkaufstechnologien ist „ILSE" durchgehend ge{\"o}ffnet, auch, wenn andere Superm{\"a}rkte l{\"a}ngst geschlossen sind. Mit einer App wird der Kundschaft der Zugang zum Verkaufsraum und das Bezahlen erm{\"o}glicht.},
  language  = {de}
}
@masterthesis{Tabel2022,
  type      = {Bachelor Thesis},
  author    = {Tabel, Tobias},
  title     = {Sen(se)sation : VR Produktvision mit multisensorischem Einfluss auf die menschliche Wahrnehmung},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {83 Seiten},
  year      = {2022},
  abstract  = {Das Sen(se)sation VR-Produktkonzept erm{\"o}glicht Nutzer*Innen die nahezu vollkommen realistische Darstellung virtuell generierter Welten. Das Konzept ist in genauer Betrachtung des aktuellen Technikstands und der Analyse von Zukunftstrends konzipiert worden und stellt eine Produktvision dar, die in sp{\"a}testens 5 Jahren problemlos umsetzbar sein wird. Um nicht den Eindruck einer unfundierten Zukunftsvision zu erzeugen, wurde sich bei der Konstruktion der integrierten Features auf aktuell erh{\"a}ltliche Vergleichsprodukte bezogen. Das Sen(se)sation VR System zeigt neue M{\"o}glichkeiten die Gestaltungs- und Technikbereich derzeitiger VR Brillen und Controller. Durch die Fokussierung des Produkts auf die Manipulation und Stimulation der f{\"u}nf Hauptsinne des Menschen wird ein so hoher Grad der Immersion erzeugt, dass die Wahrnehmung von Realit{\"a}t und Virtualit{\"a}t beinah verschwimmen k{\"o}nnte.},
  language  = {de}
}
@masterthesis{Steimel2022,
  type      = {Bachelor Thesis},
  author    = {Steimel, Nina},
  title     = {An den Rand gedr{\"a}ngt : die Marginalisierung unserer St{\"a}dte},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {55 Seiten},
  year      = {2022},
  abstract  = {In der Arbeit »An den Rand gedr{\"a}ngt-Die Marginalisierung unserer St{\"a}dte« wird anhand des Fl{\"a}chenverbrauchs des ruhenden Verkehrs er{\"o}rtert, inwieweit der private Pkw die Entwicklung unserer St{\"a}dte bestimmt. Die Zusammenstellung verschiedener Texte, Raumbeobachtungen und fotografischer Zeitdokumente soll die Problematik und Aktualit{\"a}t des Themas verst{\"a}rken. Schritt f{\"u}r Schritt sollen die Leser:innen einen neuen Blick auf die eigene Stadt gewinnen und f{\"u}r das Problem der akuten Fl{\"a}chenknappheit sensibilisiert werden. Das Werk versteht sich als Aufruf, unseren Straßenraum zu entkarbonisieren, ihn neu zu entdecken und die m{\"o}glichen Chancen im Wandel zu erkennen. Dabei geht es zun{\"a}chst nicht um die Aufz{\"a}hlung von Klimasch{\"a}den, die Abschaffung von Parkpl{\"a}tzen oder gar des Autos, sondern um die Auswirkungen, die Parkpl{\"a}tze auf unser Leben haben und vor allem um ihr Potenzial f{\"u}r die Zukunft.},
  language  = {de}
}
@masterthesis{Bortmann2022,
  type      = {Bachelor Thesis},
  author    = {Bortmann, Alevtina},
  title     = {Produktion eines „Corporate Identity"- Werbefilms f{\"u}r ein IoT Technologieunternehmen},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {45 Seiten},
  year      = {2022},
  abstract  = {Mit einem Werbefilm kann man seine Zielgruppe schnell und einfach in wenigen Minuten erreichen, indem man sich als Unternehmen auf eine freundliche Art und Weise vorstellt und somit Vertrauen und Kontakt zu der Zielgruppe herstellt. Außerdem bietet ein Werbefilm eine gute M{\"o}glichkeit sein Unternehmen als modernes und leistungsstarkes Unternehmen zu pr{\"a}sentieren, um potenzielle Kunden oder sogar neue Mitarbeiter zu werben. Mit einem {\"u}berzeugendem Werbefilm, der richtigen Musik und Animation, bleibt ein Werbefilm im Ged{\"a}chtnis der Zuschauer, viel besser als es Printwerbung in Form von einem Flyer oder einer Brosch{\"u}re erf{\"u}llen kann. Zus{\"a}tzlich kann man seine Reichweite im Social-Media Bereich um weitere Kan{\"a}le erweitern. Dies wiederum erm{\"o}glicht dem Unternehmen seinen Kundenstamm zu st{\"a}rken und auszubauen.},
  language  = {de}
}
@masterthesis{Frank2022,
  type      = {Bachelor Thesis},
  author    = {Frank, Jemima Leonie},
  title     = {Falling in love with the female gaze},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {81 Seiten},
  year      = {2022},
  abstract  = {Der „Male Gaze" bezeichnet das typische Erleben der Umwelt aus m{\"a}nnlicher Perspektive und pr{\"a}gt in den sogenannten Mainstream-Medien die Gestaltung von Film, Fernsehen und Werbung. Dadurch werden von dargestellten Personen h{\"a}ufig die k{\"o}rperlichen Aspekte hervorgehoben. Im Gegensatz dazu gilt das weibliche Pendant, der „Female Gaze", als besonders emotionsbetont. Weil Medien einen enormen Einfluss auf gesellschaftliches und individuelles Denken haben, stellt die Dominanz des „Male Gaze" eine Unausgeglichenheit dar, die sich in verschiedenen Bereichen des gesellschaftlichen Lebens widerspiegelt. Deswegen m{\"o}chte dieses Projekt die Medien um die weibliche Sichtweise erweitern und damit die dort transportierten Bilder diverser und ausgewogener machen. Die Fotografie fokussiert sich dabei auf die Gef{\"u}hlswelt der Protagonistin, womit die Betrachter:Innen schrittweise in ihre Position hineinversetzt werden sollen. Mit Augen des Mitgef{\"u}hls und eigenem Sch{\"o}nheitsbegriff l{\"a}sst „Falling in love with the female gaze" endlich auch die Frau zu Wort kommen.},
  language  = {de}
}
@masterthesis{Horvath2022,
  type      = {Bachelor Thesis},
  author    = {Horvath, Nicolas},
  title     = {Neues Corporate Design f{\"u}r das Rautenstrauch Joest Museum K{\"o}ln},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {138},
  year      = {2022},
  abstract  = {Der Mensch in seinen Welten - das Konzept des Rautenstrauch Joest Museums verfolgt den Ansatz des Kulturvergleichs und strebt im Zuge dessen die Betonung der Ebenb{\"u}rtigkeit aller Kulturen an. Die Sammlung unterteilt sich nicht - wie gewohnt - anhand geografischer Gesichtspunkte, sondern behandelt Themen, die Menschen auf der ganzen Welt besch{\"a}ftigen. Das in dieser Arbeit gestaltete neue Erscheinungsbild greift den ver{\"a}nderten gesellschaftlichen Stellenwert von ethnologischen Museen auf und positioniert das Museum als aktiven Diskussionsteilnehmer im Zuge des Postkolonialismus. Das entwickelte Key-Visual aus eigener Schrift, einheitlicher Rastersystematik und pr{\"a}gnantem Farbkonzept gibt einen Einblick darin, wie Menschen fr{\"u}her probiert haben, ihre Welt zu verstehen und sie zu erschließen.},
  language  = {de}
}
@masterthesis{Ebert2022,
  type      = {Bachelor Thesis},
  author    = {Ebert, Julia},
  title     = {Die unsichtbare Gefahr : Mikroplastik},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {23 Seiten},
  year      = {2022},
  abstract  = {Bereits ein einziger pr{\"u}fender Blick in einen klassischen Privathaushalt vermittelt einen ersten Eindruck davon, wie allgegenw{\"a}rtig Kunststoff im menschlichen Leben ist. H{\"a}ufig {\"u}bersehen wird dabei Mikroplastik, welches im Verh{\"a}ltnis zu seinen gravierenden Auswirkungen auf Mensch und Umwelt in der {\"o}ffentlichen Diskussion bislang noch wenig Beachtung findet. Das f{\"u}hrt dazu, dass die Problematik durch unaufgekl{\"a}rten Konsum weiter angefacht wird. Die Gestaltung des visuellen Magazins m{\"o}chte {\"u}ber die Konsequenzen von Mikroplastik aufkl{\"a}ren und das Bewusstsein {\"u}ber das pers{\"o}nliche Konsumverhalten sch{\"a}rfen. Mithilfe kurzer Infotexte wird die Problematik aus der wissenschaftlichen Perspektive der Umweltorganisationen beleuchtet und durch ausgew{\"a}hlte Mikroskop-Aufnahmen illustriert. Hiermit werden unsichtbare Krisentreiber endlich sichtbar gemacht.},
  language  = {de}
}
@masterthesis{Braun2022,
  type      = {Bachelor Thesis},
  author    = {Braun, Linus},
  title     = {Faces - Lebenswerte Mobilit{\"a}t in St{\"a}dten},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {173 Seiten},
  year      = {2022},
  abstract  = {Mobilit{\"a}t stellt oftmals ein Problem in St{\"a}dten dar. Es sind Staus, Abgase, Platzmangel, die sich negativ auf die urbane Lebensqualit{\"a}t auswirken. Dies sind externe Auswirkungen der von Autos dominierten Mobilit{\"a}t. Ziel von „Faces" war es, eine effiziente und vor allem attraktive Alternative zum Automobil zu bieten. Daf{\"u}r denkt das Projekt die Straßenbahn neu. Durch kompaktes Design und die Verwendung autonomer Systeme wird eine h{\"o}here Taktung erm{\"o}glicht. Zudem werden die Bahnen flexibler und k{\"o}nnen den Einsatz am Mobilit{\"a}tsbedarf anpassen. Um den Bed{\"u}rfnissen der Fahrg{\"a}ste gerecht zu werden, l{\"a}sst sich das modulare Interior an die Reisedistanz anpassen. Hier wird ein Mobilit{\"a}tskonzept gezeichnet, das einem mit einem hoffnungsvollen Blick auf das Leben in den St{\"a}dten der Zukunft zur{\"u}ckl{\"a}sst.},
  language  = {de}
}
@inproceedings{MorandiButenwegBreisetal.2022,
  author    = {Morandi, Paolo and Butenweg, Christoph and Breis, Khaled and Beyer, Katrin and Magenes, Guido},
  title     = {Behaviour factor q for the seismic design of URM buildings},
  series = {The Third European Conference on Earthquake Engineering and Seismology},
  booktitle = {The Third European Conference on Earthquake Engineering and Seismology},
  editor    = {Arion, Cristian and Scupin, Alexandra and Ţigănescu, Alexandru},
  isbn      = {978-973-100-533-1},
  pages     = {1184 -- 1194},
  year      = {2022},
  abstract  = {Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.},
  language  = {en}
}
@inproceedings{ChicoCaminosSchmitzAttietal.2022,
  author    = {Chico Caminos, Ricardo Alexander and Schmitz, Pascal and Atti, Vikrama Naga Babu and Mahdi, Zahra and Teixeira Boura, Cristiano Jos{\´e} and Sattler, Johannes Christoph and Herrmann, Ulf and Hilger, Patrick and Dieckmann, Simon},
  title     = {Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method},
  series = {SOLARPACES 2020},
  booktitle = {SOLARPACES 2020},
  number    = {2445 / 1},
  publisher = {AIP conference proceedings / American Institute of Physics},
  address   = {Melville, NY},
  isbn      = {978-0-7354-4195-8},
  issn      = {1551-7616 (online)},
  doi       = {10.1063/5.0086262},
  pages     = {8 Seiten},
  year      = {2022},
  abstract  = {The Solar-Institut J{\"u}lich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called "micro heliostat". Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.},
  language  = {en}
}
@masterthesis{Scherer2022,
  type      = {Bachelor Thesis},
  author    = {Scherer, Maike},
  title     = {Social Integrity for distributed Workforces : ein Design System f{\"u}r soziale Interaktion eines Unternehmens},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {125 Seiten},
  year      = {2022},
  abstract  = {Eine Applikation f{\"u}r die soziale Interaktion zwischen Teams und Arbeitnehmern eines Unternehmens, welche Remote und/oder Hybrid arbeiten. Wissen teilen, Weiterbilden, Wohlf{\"u}hlen In den letzten zwei Jahren kam es auf Grund der Corona-Pandemie, trotz der vielen Kommunikationsm{\"o}glichkeiten, im Privat-, sowie Arbeitsleben zu erheblichen sozialen Einschr{\"a}nkungen. Genau hier setzt die Applikation „Companion" an, um dem Arbeitnehmer das In-Office-Gef{\"u}hl auch Remote {\"u}bersetzen zu k{\"o}nnen. Der Arbeitnehmer kann mit seinen Kollegen sozialisieren, diese besser kennenlernen und wird zus{\"a}tzlich durch Events und Workshops professionell weitergebildet.},
  language  = {de}
}
@masterthesis{Kaspor2022,
  type      = {Bachelor Thesis},
  author    = {Kaspor, Alexej},
  title     = {Kritik der digitalen Rationalisierung},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {135 Seiten},
  year      = {2022},
  abstract  = {Digitalisierung macht's m{\"o}glich: mittlerweile beziehen sich Designer:innen in ihrer Konzeptentwicklung immer h{\"a}ufiger auf Referenzdesigns. Sie picken sich die Eigenschaften aus ihnen heraus, von denen sie sich die gr{\"o}ßte Marktf{\"a}higkeit versprechen, und basteln sie zu einem neuen Produkt zusammen. Voil{\`a}. Doch wie unkonventionell kann Design noch sein? Wie viel Luft bleibt der Kreativit{\"a}t unter dem immer enger geschn{\"u}rten Korsett der Marktf{\"a}higkeit? Alexej Kaspor er{\"o}ffnet die Diskussion mit einem provokanten Projekt, das einen kritischen Blick in die Zukunft des Industriedesigns wirft. Dazu fasst er g{\"a}ngige Designprogramme in einer Software zusammen und verbindet sie mit einer k{\"u}nstlichen Intelligenz, die die aktuelle Entwicklung digital rationalisieren und auf die Spitze treiben soll. Diese f{\"u}hrt Meta-Analysen {\"u}ber das Nutzungsverhalten durch und pr{\"u}ft damit Frameworks von Referenzdesigns auf ihre Vermarktbarkeit. Aus diesen entwickelt sie dann Gestaltungsvorschl{\"a}ge, ohne beim Seiltanz zwischen Trendh{\"o}rigkeit und Scheinindividualismus aus dem Gleichgewicht zu kommen. Innerhalb von Sekunden werden den Designer:innen perfekte Vorschl{\"a}ge {\"u}bers Metaverse simuliert. Auf dem Silbertablett serviert, {\"u}bersichtlich und gef{\"a}hrlich einfach. Bereit, kombiniert und in Produktion gebracht zu werden. Auch mit dem Tracking der KI kann niemand mithalten: um immer am Puls der Zeit zu bleiben, benachrichtigt sie die Designer:innen in Echtzeit {\"u}ber die neuesten Innovationen und Trends. Ressourcenraubendes Herumprobieren in CAD-Programmen geh{\"o}rt also der Vergangenheit an. Das Programm schafft Abhilfe, und verspricht dabei auch noch die h{\"o}chste Effizienz, konkret: garantiertes Kapital. Schlagende Argumente, die die Schw{\"a}chen der Konsumgesellschaft und Kommerzialisierung gezielt ausgenutzen. Es entsteht die perfekte Marketingmaßnahme, ein genialer Treiber f{\"u}r den Turbokapitalismus. Kram, den niemand braucht und zynische Statussymbole inklusive. Der Stolz der geltungsbed{\"u}rftigen Designer:innen wird dabei selbstverst{\"a}ndlich nicht untergraben. Sie sollen mitziehen. Mit zahlreichen Notches wird der Erfolg und die Konkurrenzf{\"a}higkeit des Produkts prognostiziert und ihnen Honig ums Maul geschmiert. Die beklemmende Vorahnung wird sich best{\"a}tigen. Schritt f{\"u}r Schritt enteignet die KI den Designer:innen ihre Kreativit{\"a}t, bis sie nicht mehr sind als die Kurator:innen berechenbarer Produktkonzepte. Der Sp{\"a}tkapitalismus hat sie in der Mangel. Versprochen: diese Arbeit l{\"a}sst niemanden kalt.},
  language  = {de}
}
@inproceedings{SattlerSchneiderAngeleetal.2022,
  author    = {Sattler, Johannes Christoph and Schneider, Iesse Peer and Angele, Florian and Atti, Vikrama Naga Babu and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Development of heliostat field calibration methods: Theory and experimental test results},
  series = {SolarPACES 2022 conference proceedings},
  booktitle = {SolarPACES 2022 conference proceedings},
  number    = {1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.678},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut J{\"u}lich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.},
  language  = {en}
}
@inproceedings{SattlerAttiAlexopoulosetal.2022,
  author    = {Sattler, Johannes Christoph and Atti, Vikrama Naga Babu and Alexopoulos, Spiros and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf and Dutta, Siddharth and Kioutsioukis, Ioannis},
  title     = {DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook},
  series = {SolarPACES 2022 conference proceedings},
  booktitle = {SolarPACES 2022 conference proceedings},
  number    = {1},
  publisher = {TIB Open Publishing},
  address   = {Hannover},
  issn      = {2751-9899 (online)},
  doi       = {10.52825/solarpaces.v1i.731},
  pages     = {9 Seiten},
  year      = {2022},
  abstract  = {This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut J{\"u}lich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 \% based on the tested days. The result fulfils SIJ's aim to achieve a reliability of around 70 \%, but SIJ aims to still improve the DNI forecast quality.},
  language  = {en}
}
@masterthesis{Krebs2022,
  type      = {Bachelor Thesis},
  author    = {Krebs, Benedikt},
  title     = {Das Online-Ich : Erlebnis-Installation zur Reflexion {\"u}ber das digitale Selbst},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {38 Seiten},
  year      = {2022},
  abstract  = {Soziale Netzwerke geh{\"o}ren zu den gr{\"o}ßten Konzernen der Welt. Hier werden min{\"u}tlich Millionen von Nachrichten verschickt. Das Internet spielt eine stetig wachsende Rolle in der zwischenmenschlichen Kommunikation. Und doch funktioniert dort nicht nur die Sprache anders, auch die Pers{\"o}nlichkeit der Menschen kann sich auch ver{\"a}ndern. Diese Arbeit besch{\"a}ftigt sich mit dem „Online-Ich", das jeder in sich tragen soll. H{\"a}ufig ist dieses offener, hilfsbereiter und selbstloser, aber eben auch reizbarer, aggressiver und energetischer. Um auf diese Ver{\"a}nderung aufmerksam zu machen, werden die analoge und digitale Pers{\"o}nlichkeit verglichen. Dazu sch{\"o}pft die Arbeit aus den vielf{\"a}ltigen M{\"o}glichkeiten von Virtual Reality, um Betrachtende in die Arbeit miteinzubeziehen.},
  language  = {de}
}