@article{HaissigDoerenWilmes1981,
  author    = {Haissig, Manfred and D{\"o}ren, Horst-Peter and Wilmes, S.},
  title     = {Stand der Entwicklung des Horizontal-Stranggießens von Edelstahl bei der B{\"o}hler AG},
  series = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  journal   = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  issn      = {0340-4803},
  pages     = {383 -- 390},
  year      = {1981},
  language  = {de}
}
@article{DoerenWernicke1987,
  author    = {D{\"o}ren, Horst-Peter and Wernicke, K.},
  title     = {Slijtvaste lagen door oplassen met plasmapoeder},
  series = {Metaal en Kunststof: MK. Universeel weekblad voor fabriek en werkplaats. 24 (1987), Nr. 23},
  journal   = {Metaal en Kunststof: MK. Universeel weekblad voor fabriek en werkplaats. 24 (1987), Nr. 23},
  issn      = {0026-0460},
  pages     = {76 -- 79},
  year      = {1987},
  language  = {nl}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {{\"A}nderungen zur Haftung und Verg{\"u}tung im Vereins- und Stiftungsrecht},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {693 -- 699},
  year      = {2013},
  language  = {de}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {Begrenzung von vertraglichen H{\"o}chstfristen f{\"u}r Zahlungen und Abnahmen},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {49 -- 56},
  year      = {2013},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@article{ReisgenSchleserJerabeketal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Messung der Strahlqualit{\"a}t einer Elektronenstrahlanlage in Umgebungsatmosph{\"a}re},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  pages     = {45 -- 52},
  year      = {2010},
  abstract  = {In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im gr{\"o}ßeren Maßstab verwendet wird, seine F{\"a}higkeit als qualitatives Werkzeug f{\"u}r die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosph{\"a}rendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualit{\"a}t, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngr{\"o}ßen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage {\"u}ber die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngr{\"o}ßen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosph{\"a}rischen Bedingungen beschrieben. Es wird zudem die Abh{\"a}ngigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.},
  language  = {de}
}
@article{AhmedReisgenSchleseretal.2010,
  author    = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg},
  title     = {On formability of tailor laser welded blanks of DP/TRIP steel sheets},
  series = {Science and technology of welding and joining},
  volume    = {15},
  journal   = {Science and technology of welding and joining},
  number    = {5},
  publisher = {Maney},
  address   = {Leeds},
  issn      = {1743-2936},
  doi       = {10.1179/136217110X12731414739754},
  pages     = {337 -- 342},
  year      = {2010},
  abstract  = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel},
  series = {ISIJ international},
  volume    = {Vol. 51},
  journal   = {ISIJ international},
  number    = {No. 3},
  publisher = {ISIJ},
  address   = {Tōkyō},
  organization    = {Iron and Steel Institute of Japan (ISIJ)},
  issn      = {1347-5460 (E-Journal); 0915-1559 (Print)},
  pages     = {429 -- 434},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Naumov, Andreas},
  title     = {Erweiterung des Parameterfelds zum R{\"u}hrreibschweißen mittels konduktiver Unterst{\"u}tzung},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 63},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 12},
  publisher = {DVS-Media GmbH},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {710 -- 714},
  year      = {2011},
  language  = {de}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Thiele, Regina},
  title     = {Elektromobilit{\"a}t - Herausforderungen an die F{\"u}getechnik},
  series = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  volume    = {Jg. 1},
  journal   = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  number    = {Nr. 2},
  editor    = {Kampker, Achim},
  pages     = {16 -- 17},
  year      = {2011},
  language  = {de}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{AgrafiotisMavroidisKonstandopoulosetal.2007,
  author    = {Agrafiotis, Christos C. and Mavroidis, Ilias and Konstandopoulos, Athansios G. and Hoffschmidt, Bernhard and Stobbe, Per and Romero, Manuel and Fernandez-Quero, Valerio},
  title     = {Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation},
  series = {Solar energy materials and solar cells},
  volume    = {Vol. 91},
  journal   = {Solar energy materials and solar cells},
  number    = {Iss. 6},
  issn      = {1879-3398 (E-Journal); 0927-0248 (Print)},
  pages     = {474 -- 488},
  year      = {2007},
  language  = {en}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@article{DiltheySchleserHanischetal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hanisch, Vera and Gries, Thomas},
  title     = {Garnzugpr{\"u}fung polymergetr{\"a}nkter Textilien f{\"u}r die Bewehrung von Beton},
  series = {Technische Textilien},
  volume    = {49},
  journal   = {Technische Textilien},
  number    = {1},
  issn      = {0323-3243},
  pages     = {48 -- 50},
  year      = {2006},
  language  = {de}
}
@article{FeldmannPakGessleretal.2008,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Schleser, Markus},
  title     = {Entwicklung eines Bemessungsmodells f{\"u}r punktf{\"o}rmige Verbindungen textibewehrter Betonbauteile},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Bd. 85},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {2},
  issn      = {0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351},
  pages     = {143 -- 147},
  year      = {2008},
  language  = {de}
}
@article{DiltheySchleserFeldmannetal.2008,
  author    = {Dilthey, Ulrich and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts},
  series = {Cement and concrete composites},
  volume    = {Vol. 30},
  journal   = {Cement and concrete composites},
  number    = {iss. 2},
  issn      = {0958-9465},
  pages     = {82 -- 87},
  year      = {2008},
  language  = {en}
}
@article{ReisgenSchleserFeldmannetal.2008,
  author    = {Reisgen, Uwe and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Kleben d{\"u}nnwandiger Bauteile aus textilbewehrtem Beton},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 60},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 7/8},
  issn      = {0036-7184},
  pages     = {408 -- 412},
  year      = {2008},
  language  = {de}
}
@article{MelissWindheim1977,
  author    = {Meliß, Michael and Windheim, R.},
  title     = {Energiequelle f{\"u}r morgen : M{\"o}glichkeiten und Grenzen der Windenergienutzung - ein Statusbericht},
  series = {VDI-Nachrichten. Bd. 31 (1977), H. 22},
  journal   = {VDI-Nachrichten. Bd. 31 (1977), H. 22},
  issn      = {0042-1758},
  pages     = {37 -- 38},
  year      = {1977},
  language  = {de}
}
@article{DiltheyBrandenburgSchleser2004,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Dispensing and application of unfilled adhesives in the micro range},
  series = {Welding and cutting. 3 (2004), H. 4},
  journal   = {Welding and cutting. 3 (2004), H. 4},
  issn      = {1612-3433},
  pages     = {250 -- 254},
  year      = {2004},
  language  = {en}
}
@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}
@article{DiltheySchleserGessleretal.2005,
  author    = {Dilthey, Ulrich and Schleser, Markus and Geßler, Achim and Rettweiler, Timo and V{\"o}lling, Boris},
  title     = {Kleben textilbewehrter Betonbauteile},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  issn      = {0036-7184},
  pages     = {373 -- 377},
  year      = {2005},
  language  = {de}
}
@article{Meliss1985,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 37 (1985), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 37 (1985), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {145 -- 150},
  year      = {1985},
  language  = {de}
}
@article{Meliss1984,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 36 (1984), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 36 (1984), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {134 -- 139},
  year      = {1984},
  language  = {de}
}
@article{Meliss1983,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 35 (1983), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 35 (1983), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {150 -- 155},
  year      = {1983},
  language  = {de}
}
@article{Meliss1982,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 34 (1982), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 34 (1982), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {182 -- 189},
  year      = {1982},
  language  = {de}
}
@article{Meliss1981,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 33 (1981), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 33 (1981), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {138 -- 145},
  year      = {1981},
  language  = {de}
}
@article{SteinMeliss1980,
  author    = {Stein, H. and Meliß, Michael},
  title     = {Die Bedeutung der Sonnenenergie f{\"u}r die zuk{\"u}nftige Energieversorgung der Bundesrepublik Deutschland},
  series = {Din-Mitteilungen + Elektronorm. Bd. 59 (1980), H. 8},
  journal   = {Din-Mitteilungen + Elektronorm. Bd. 59 (1980), H. 8},
  issn      = {0722-2912},
  pages     = {434 -- 440},
  year      = {1980},
  language  = {de}
}
@article{Meliss1979,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 31 (1979), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 31 (1979), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {147 -- 154},
  year      = {1979},
  language  = {de}
}
@article{Meliss1978,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK},
  volume    = {30},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK},
  number    = {4},
  publisher = {Springer-VDI-Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {151 -- 156},
  year      = {1978},
  language  = {de}
}
@article{MelissBuende1978,
  author    = {Meliß, Michael and B{\"u}nde, R.},
  title     = {Unkonventionelle Energiequellen - Entwicklungsstudien (4)},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK},
  volume    = {30},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK},
  number    = {3},
  publisher = {Springer-VDI-Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {120 -- 126},
  year      = {1978},
  language  = {de}
}
@article{KernBraun2013,
  author    = {Kern, Alexander and Braun, Christian},
  title     = {Neuerungen bei der Blitzschutznorm. Teil 2},
  series = {etz Elektrotechnik und Automation},
  volume    = {Bd. 134},
  journal   = {etz Elektrotechnik und Automation},
  number    = {H. 8},
  publisher = {VDE-Verlag},
  address   = {Wuppertal},
  issn      = {0170-1711},
  pages     = {66 -- 69},
  year      = {2013},
  language  = {de}
}
@article{MartiusMischke2012,
  author    = {Martius, Alexander and Mischke, Winfried},
  title     = {Die Vernehmung des Wohnungseigent{\"u}mers : wann ist der Wohnungseigent{\"u}mer als Partei, wann als Zeuge zu vernehmen?},
  series = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  journal   = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  number    = {Fach 7},
  publisher = {ZAP Verlag},
  address   = {Bonn},
  issn      = {0936-7292},
  pages     = {431 -- 434},
  year      = {2012},
  language  = {de}
}
@article{MischkeGirkens2011,
  author    = {Mischke, Winfried and Girkens, Hans-Peter},
  title     = {Kostenvorschuss beim selbst{\"a}ndigen Beweisverfahren : zur Kostentragung, wenn der Antragsteller den f{\"u}r die Durchf{\"u}hrung erforderlichen Vorschuss f{\"u}r den Sachverst{\"a}ndigen nicht zahlt},
  series = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  journal   = {Zeitschrift f{\"u}r die Anwaltspraxis : ZAP},
  number    = {Fach 13},
  publisher = {Westlaw Datenbank GmbH},
  address   = {Frankfurt a. M.},
  issn      = {0936-7292},
  pages     = {1739 -- 1740},
  year      = {2011},
  language  = {de}
}
@article{MischkeNeuss2009,
  author    = {Mischke, Winfried and Neuß, Frank},
  title     = {F{\"u}hrt die {\"U}bernahme der Domain eines anderen Unternehmers zur Haftung f{\"u}r dessen Schulden nach \S 25 HGB?},
  series = {Zeitschrift f{\"u}r Vertragsgestaltung, Schuld- und Haftungsrecht : ZGS},
  volume    = {8},
  journal   = {Zeitschrift f{\"u}r Vertragsgestaltung, Schuld- und Haftungsrecht : ZGS},
  publisher = {ZAP, Verl. f. die Rechts- und Anwaltspraxis},
  address   = {Recklinghausen},
  issn      = {1619-7011},
  pages     = {407 -- 409},
  year      = {2009},
  language  = {de}
}
@article{MootzMerschenzQuack1987,
  author    = {Mootz, D. and Merschenz-Quack, Angelika},
  title     = {Zur Kenntnis der h{\"o}chsten Hydrate der Schwefels{\"a}ure: Bildung und Struktur von H2SO4·6,5 H2O und H2SO4·8H2O},
  series = {Zeitschrift f{\"u}r Naturforschung B: Journal of chemical sciences},
  volume    = {42},
  journal   = {Zeitschrift f{\"u}r Naturforschung B: Journal of chemical sciences},
  number    = {H. 10},
  issn      = {1865-7117 (E-Journal); 0932-0776 (Print)},
  pages     = {1231 -- 1236},
  year      = {1987},
  language  = {de}
}
@article{MerschenzQuack1991,
  author    = {Merschenz-Quack, Angelika},
  title     = {Betriebsanweisungen beim Umgang mit Gefahrstoffen},
  series = {Elektro-Praktiker : Fachzeitschrift f{\"u}r Handwerk und Industrie},
  volume    = {Bd. 45},
  journal   = {Elektro-Praktiker : Fachzeitschrift f{\"u}r Handwerk und Industrie},
  number    = {H. 10},
  issn      = {0013-5569},
  pages     = {644 -- 649},
  year      = {1991},
  language  = {de}
}
@article{KaltschmittThraenFredebeulKreinetal.2006,
  author    = {Kaltschmitt, Martin and Thr{\"a}n, Daniela and Fredebeul-Krein, Markus and Vogel, Erika and Kalitzky, Thomas and Ehrhart, Karl Martin and Hoppe, Christian and Seifert, Stefan and Sijm, Jos and B{\"o}hringer, Christoph and Hoffmann, Tim and Moslener, Ulf and Sturm, Bodo and Diekmann, Jochen and Schleich, Joachim},
  title     = {CO2-Emissionshandel},
  series = {Zeitschrift f{\"u}r Energiewirtschaft},
  volume    = {Vol. 30},
  journal   = {Zeitschrift f{\"u}r Energiewirtschaft},
  number    = {Iss. 4},
  issn      = {0343-5377 (Print) 1866-2765 (Online)},
  pages     = {271 -- 314},
  year      = {2006},
  language  = {de}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Reisgen, Uwe and Schleser, Markus},
  title     = {Laser assisted joining of plastic metal hybrids},
  series = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  journal   = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  organization    = {International WLT Conference on Lasers in Manufacturing <6, M{\"u}nchen, 2011>},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  pages     = {370 -- 377},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation},
  series = {Frontiers of materials science},
  volume    = {Vol. 5},
  journal   = {Frontiers of materials science},
  number    = {Iss. 2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2095-0268 (E-Journal); 2095-025X (Print)},
  pages     = {79 -- 89},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Statistical modeling of laser welding of DP/TRIP steel sheets},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.05.025},
  pages     = {92 -- 101},
  year      = {2012},
  abstract  = {In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box-Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Optimization of laser welding of DP/TRIP steel sheets using statistical approach},
  series = {Optics and laser technology},
  volume    = {44},
  journal   = {Optics and laser technology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)},
  doi       = {10.1016/j.optlastec.2011.06.028},
  pages     = {255 -- 262},
  year      = {2012},
  abstract  = {Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box-Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2-2.2 kW), welding speed (40-50 mm/s) and focus position (-1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.},
  language  = {en}
}
@article{ReisgenOlschokJakobsetal.2012,
  author    = {Reisgen, Uwe and Olschok, Simon and Jakobs, Stefan and Schleser, Markus and Mokrov, Oleg and Rossiter, Eduardo},
  title     = {Laser beam submerged arc hybrid welding},
  series = {Physics procedia},
  volume    = {39},
  journal   = {Physics procedia},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1875-3892},
  doi       = {10.1016/j.phpro.2012.10.016},
  pages     = {75 -- 83},
  year      = {2012},
  abstract  = {The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.},
  language  = {en}
}
@article{WincklerKruegerSchnitzleretal.2014,
  author    = {Winckler, Silvia and Krueger, Rolf and Schnitzler, Thomas and Zang, Werner and Fischer, Rainer and Biselli, Manfred},
  title     = {A sensitive monitoring system for mammalian cell cultivation processes: a PAT approach},
  series = {Bioprocess and biosystems engineering},
  volume    = {37},
  journal   = {Bioprocess and biosystems engineering},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1615-7591 (Print) 1615-7605 (Online)},
  doi       = {10.1007/s00449-013-1062-8},
  pages     = {901 -- 912},
  year      = {2014},
  abstract  = {Biopharmaceuticals such as antibodies are produced in cultivated mammalian cells, which must be monitored to comply with good manufacturing practice. We, therefore, developed a fully automated system comprising a specific exhaust gas analyzer, inline analytics and a corresponding algorithm to precisely determine the oxygen uptake rate, carbon dioxide evolution rate, carbon dioxide transfer rate, transfer quotient and respiratory quotient without interrupting the ongoing cultivation, in order to assess its reproducibility. The system was verified using chemical simulation experiments and was able to measure the respiratory activity of hybridoma cells and DG44 cells (derived from Chinese hamster ovary cells) with satisfactory results at a minimum viable cell density of ~2.0 × 10⁵ cells ml⁻¹. The system was suitable for both batch and fed-batch cultivations in bubble-aerated and membrane-aerated reactors, with and without the control of pH and dissolved oxygen.},
  language  = {en}
}
@article{Schnitzler2009,
  author    = {Schnitzler, Thomas},
  title     = {Cultivation of hybridoma cell line CF-10H5 (DSMZ ACC477)},
  series = {Application notes / Sartorius stedim biotech},
  journal   = {Application notes / Sartorius stedim biotech},
  pages     = {1 -- 4},
  year      = {2009},
  language  = {en}
}
@article{Schnitzler2009,
  author    = {Schnitzler, Thomas},
  title     = {Kultivierung der Hybridomazelllinie CF-10H5 (DSMZ ACC477)},
  series = {Application notes / Sartorius stedim biotech},
  journal   = {Application notes / Sartorius stedim biotech},
  publisher = {Sartorius Stedim Biotec},
  address   = {Aubagne},
  year      = {2009},
  language  = {de}
}
@article{SchnitzlerBiselli2005,
  author    = {Schnitzler, Thomas and Biselli, Manfred},
  title     = {Cultivo de lineas celulares de hibridoma por CF-10H5 (DSMZ ACC477) en el BIOSTAT B plus},
  series = {Noticias tecnicas del laboratorio},
  volume    = {13},
  journal   = {Noticias tecnicas del laboratorio},
  number    = {3},
  pages     = {7 -- 8},
  year      = {2005},
  language  = {es}
}
@article{HellmannsBoehmDilger2006,
  author    = {Hellmanns, Mark and B{\"o}hm, Stefan and Dilger, Klaus},
  title     = {Manual applications of adhesives},
  series = {Journal of adhesion and interface},
  volume    = {Vol. 7},
  journal   = {Journal of adhesion and interface},
  number    = {No. 4},
  pages     = {24 -- 27},
  year      = {2006},
  language  = {en}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey},
  title     = {Measuring of plasma properties induced by non-vacuum electron beam welding},
  series = {Physics of plasma},
  volume    = {19},
  journal   = {Physics of plasma},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7674 (E-Journal); 1070-664X (Print)},
  doi       = {10.1063/1.3675874},
  pages     = {1 -- 7},
  year      = {2012},
  abstract  = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modellierung und Visualisierung der MSG-Lichtbogenprozesse},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {64},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {166 -- 174},
  year      = {2012},
  language  = {de}
}
@article{ScheikSchleserReisgen2012,
  author    = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe},
  title     = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik},
  series = {Adh{\"a}sion : Kleben \& Dichten},
  volume    = {56},
  journal   = {Adh{\"a}sion : Kleben \& Dichten},
  number    = {11},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0001-8198 (E-Journal); 0001-8198 (Print)},
  doi       = {10.1007/s35145-012-0005-x},
  pages     = {36 -- 40},
  year      = {2012},
  abstract  = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modelling and visualisation of the GMA process},
  series = {Welding and Cutting},
  volume    = {11},
  journal   = {Welding and Cutting},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {1612-3433},
  pages     = {242 -- 249},
  year      = {2012},
  language  = {en}
}
@article{ReisgenSchleserSchiebahn2013,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander},
  title     = {Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 65},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 6},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {309 -- 313},
  year      = {2013},
  language  = {de}
}
@article{RamazaniLiMukherjeeetal.2013,
  author    = {Ramazani, Ali and Li, Yang and Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Abdurakhmanov, Aydemir and Schleser, Markus and Reisgen, Uwe},
  title     = {Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding},
  series = {Computational materials science},
  volume    = {Vol. 68},
  journal   = {Computational materials science},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0801 (E-Book); 0927-0256 (Print)},
  pages     = {107 -- 116},
  year      = {2013},
  language  = {en}
}
@article{HemmerlingMerschenzQuackWunderlich1988,
  author    = {Hemmerling, H.-J. and Merschenz-Quack, Angelika and Wunderlich, H.},
  title     = {Crystal structures of indeno[1,2-d]imidazoles. XIth European Crystallographic Meeting, Vienna 1988},
  series = {Zeitschrift f{\"u}r Kristallographie - Crystalline Materials},
  volume    = {185},
  journal   = {Zeitschrift f{\"u}r Kristallographie - Crystalline Materials},
  number    = {H. 1-4},
  issn      = {2196-7105 (E-Books); 2194-4946 (Print)},
  pages     = {256},
  year      = {1988},
  language  = {en}
}
@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors influencing the formation of weld defects in non-vacuum electron beam welding},
  series = {The Paton welding journal},
  volume    = {2012},
  journal   = {The Paton welding journal},
  number    = {2},
  publisher = {Paton Publishing House},
  address   = {Kiev},
  issn      = {0957-798X},
  pages     = {11 -- 18},
  year      = {2012},
  abstract  = {The influence of welding condition parameters and properties of material on formation of defects, such as humping and undercuts, in non-vacuum electron beam welding was investigated. The influence of separate welding parameters on the quality of welds was determined.},
  language  = {en}
}
@article{BoehmHellmannsBackesetal.2006,
  author    = {B{\"o}hm, Stefan and Hellmanns, Mark and Backes, Andreas and Dilger, Klaus},
  title     = {Lock-in thermography based NDT of parts for the automotive industry},
  series = {Journal of adhesion and interface},
  volume    = {Vol. 7},
  journal   = {Journal of adhesion and interface},
  number    = {No. 4},
  pages     = {10 -- 12},
  year      = {2006},
  language  = {en}
}
@article{BandodkarMolinnusMirzaetal.2014,
  author    = {Bandodkar, Amay J. and Molinnus, Denise and Mirza, Omar and Guinovart, Tomas and Windmiller, Joshua R. and Valdes-Ramirez, Gabriela and Andrade, Francisco J. and Sch{\"o}ning, Michael Josef and Wang, Joseph},
  title     = {Epidermal tattoo potentiometric sodium sensors with wireless signal transduction for continuous non-invasive sweat monitoring},
  series = {Biosensors and bioelectronics},
  volume    = {54},
  journal   = {Biosensors and bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4235 (E-Journal); 0956-5663 (Print)},
  doi       = {10.1016/j.bios.2013.11.039},
  pages     = {603 -- 609},
  year      = {2014},
  abstract  = {This article describes the fabrication, characterization and application of an epidermal temporary-transfer tattoo-based potentiometric sensor, coupled with a miniaturized wearable wireless transceiver, for real-time monitoring of sodium in the human perspiration. Sodium excreted during perspiration is an excellent marker for electrolyte imbalance and provides valuable information regarding an individual's physical and mental wellbeing. The realization of the new skin-worn non-invasive tattoo-like sensing device has been realized by amalgamating several state-of-the-art thick film, laser printing, solid-state potentiometry, fluidics and wireless technologies. The resulting tattoo-based potentiometric sodium sensor displays a rapid near-Nernstian response with negligible carryover effects, and good resiliency against various mechanical deformations experienced by the human epidermis. On-body testing of the tattoo sensor coupled to a wireless transceiver during exercise activity demonstrated its ability to continuously monitor sweat sodium dynamics. The real-time sweat sodium concentration was transmitted wirelessly via a body-worn transceiver from the sodium tattoo sensor to a notebook while the subjects perspired on a stationary cycle. The favorable analytical performance along with the wearable nature of the wireless transceiver makes the new epidermal potentiometric sensing system attractive for continuous monitoring the sodium dynamics in human perspiration during diverse activities relevant to the healthcare, fitness, military, healthcare and skin-care domains.},
  language  = {en}
}
@article{ReisertGeisslerFloerkeetal.2013,
  author    = {Reisert, Steffen and Geissler, Hanno and Fl{\"o}rke, Rudolf and Weiler, Christian and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Characterisation of aseptic sterilisation processes using an electronic nose},
  series = {International journal of nanotechnology},
  volume    = {Vol. 10},
  journal   = {International journal of nanotechnology},
  number    = {No. 5-7},
  publisher = {Inderscience Enterprises},
  address   = {Gen{\`e}ve},
  issn      = {1475-7435 (Print) 7141-8151 (Online)},
  pages     = {470 -- 484},
  year      = {2013},
  language  = {en}
}
@article{SchneiderSchneiderKinderetal.2013,
  author    = {Schneider, Bettina and Schneider, Wilhelm and Kinder, Stephanie and Meinhardt, Kerstin},
  title     = {Die Fallstudie: Besteuerung außerordentlicher Eink{\"u}nfte bei der Einkommensteuer},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Pr{\"u}fung, Berufseinstieg und Fortbildung},
  volume    = {42},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Pr{\"u}fung, Berufseinstieg und Fortbildung},
  number    = {11},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {1432 -- 1434},
  year      = {2013},
  language  = {de}
}
@article{Dikta2014,
  author    = {Dikta, Gerhard},
  title     = {Asymptotically efficient estimation under semi-parametric random censorship models},
  series = {Journal of multivariate analysis},
  volume    = {124},
  journal   = {Journal of multivariate analysis},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1095-7243 (E-Journal); 0047-259X (Print)},
  doi       = {10.1016/j.jmva.2013.10.002},
  pages     = {10 -- 24},
  year      = {2014},
  abstract  = {We study the estimation of some linear functionals which are based on an unknown lifetime distribution. The observations are assumed to be generated under the semi-parametric random censorship model (SRCM), that is, a random censorship model where the conditional expectation of the censoring indicator given the observation belongs to a parametric family. Under this setup a semi-parametric estimator of the survival function was introduced by the author. If the parametric model assumption is correct, it is known that the estimated functional which is based on this semi-parametric estimator is asymptotically at least as efficient as the corresponding one which rests on the nonparametric Kaplan-Meier estimator. In this paper we show that the estimated functional which is based on this semi-parametric estimator is asymptotically efficient with respect to the class of all regular estimators under this semi-parametric model.},
  language  = {en}
}
@article{DoeringKendrickLawson2013,
  author    = {D{\"o}ring, Bernd and Kendrick, C. and Lawson, R. M.},
  title     = {Thermal capacity of composite floor slabs},
  series = {Energy and buildings},
  volume    = {Vol. 67},
  journal   = {Energy and buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-6178 (E-Journal); 0378-7788 (Print)},
  pages     = {531 -- 539},
  year      = {2013},
  language  = {en}
}
@article{MiyamotoHirayamaWagneretal.2013,
  author    = {Miyamoto, Ko-ichiro and Hirayama, Yuji and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Visualization of enzymatic reaction in a microfluidic channel using chemical imaging sensor},
  series = {Electrochimica acta},
  journal   = {Electrochimica acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3859 (E-Journal); 0013-4686 (Print)},
  pages     = {Publ. online},
  year      = {2013},
  language  = {en}
}
@article{HeggerClassenSchaumannetal.2013,
  author    = {Hegger, Josef and Claßen, Martin and Schaumann, Peter and Sothmann, J{\"o}rg and Feldmann, Markus and D{\"o}ring, Bernd},
  title     = {Entwicklung einer integrierten Verbunddecke f{\"u}r nachhaltige Stahlbauten},
  series = {Stahlbau},
  volume    = {Vol. 82},
  journal   = {Stahlbau},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {11 -- 17},
  year      = {2013},
  language  = {de}
}
@article{HeggerClassenFeldmannetal.2011,
  author    = {Hegger, Josef and Claßen, Martin and Feldmann, Markus and D{\"o}ring, Bernd and Schaumann, Peter and Sothmann, J{\"o}rg and Bohne, Dirk and Hargus, Steen and Barben, Daniel and Aarden, Erik and Schielke, Sabine},
  title     = {Integrierte und nachhaltigkeitsorientierte Deckensysteme im Stahl- und Verbundbau},
  series = {Stahlbau},
  volume    = {Vol. 80},
  journal   = {Stahlbau},
  number    = {Iss. 10},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {728 -- 733},
  year      = {2011},
  language  = {de}
}
@article{DoeringFeldmannKuhnhenneetal.2011,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus and M{\"u}ller, Dirk},
  title     = {Phasenwechselmaterial im Metallleichtbau zur Optimierung von Energieeffizienz und sommerlicher Raumtemperatur},
  series = {Stahlbau},
  volume    = {Vol. 80},
  journal   = {Stahlbau},
  number    = {Iss. 9},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {666 -- 672},
  year      = {2011},
  language  = {de}
}
@article{KuhnhenneDoeringKockeretal.2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Kocker, Ronald and Pyschny, Dominik and Feldmann, Markus},
  title     = {Die {\"O}kobilanz als Baustein der Nachhaltigkeitsbewertung im Industrie- und Gewerbebau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001336},
  pages     = {439 -- 447},
  year      = {2010},
  abstract  = {Im Herbst 2009 wurde das "Deutsche G{\"u}tesiegel Nachhaltiges Bauen" f{\"u}r die Geb{\"a}udetypen Industriebauten und Handelsbauten offiziell vorgestellt. Die {\"O}kobilanz als wichtiger Baustein der Nachhaltigkeitsbewertung wird somit auch im Industrie- und Gewerbebau zuk{\"u}nftig stark an Bedeutung gewinnen. Der vorliegende Beitrag beinhaltet einen Vergleich der Umweltleistung verschiedener Bauweisen des Industrie- und Gewerbebaus, die durch die {\"O}kobilanzierung quantifizierbar wird, anhand von momentan verf{\"u}gbaren Daten und Methoden. Es werden ausgew{\"a}hlte Ergebnisse sowie vorhandene Unsicherheiten und daraus resultierender Forschungsbedarf aufgezeigt.},
  language  = {de}
}
@article{KuhnhenneDoeringFeldmann2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Feldmann, Markus},
  title     = {Grunds{\"a}tze und L{\"o}sungen zur W{\"a}rmebr{\"u}ckenreduktion im Metallleichtbau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {5},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001330},
  pages     = {345 -- 355},
  year      = {2010},
  abstract  = {Die Anforderungen an das energiesparende Bauen sind mit der Einf{\"u}hrung der Energieeinsparverordnung (EnEV) 2009 auch im Industrie- und Gewerbebau deutlich versch{\"a}rft worden. Einen wesentlichen Beitrag zur Energieeinsparung liefert die Minimierung des Transmissionsw{\"a}rmetransfers. Analysiert man Geb{\"a}udeh{\"u}llen in Metallleichtbauweise stellt man fest, dass eine Erh{\"o}hung der W{\"a}rmed{\"a}mmst{\"a}rke allein noch nicht zielf{\"u}hrend ist, zus{\"a}tzlich sind W{\"a}rmebr{\"u}ckeneffekte zu ber{\"u}cksichtigen und deren Einfl{\"u}sse auf die W{\"a}rmetransmission zu reduzieren. Neben der Bedeutung f{\"u}r die Energieeinsparung ist eine w{\"a}rmetechnisch optimierte Detailausbildung auch erforderlich, um einen ausreichenden Feuchteschutz (Vermeidung von Tauwasser und Schimmelpilz) zu realisieren und so Sch{\"a}den zu vermeiden. Ein wichtiges Hilfsmittel stellt hierzu der vom Industrieverband f{\"u}r Bausysteme im Metallleichtbau (IFBS) herausgegebene W{\"a}rmebr{\"u}ckenatlas der Metall-Sandwichbauweise dar.},
  language  = {de}
}
@article{DoeringFeldmannKuhnhenne2009,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus},
  title     = {Der Beitrag von Profilblechdecken zur passiven K{\"u}hlung},
  series = {Bauphysik},
  volume    = {Vol. 31},
  journal   = {Bauphysik},
  number    = {Iss. 2},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1437-0980 (E-Journal); 0171-5445 (Print)},
  pages     = {65 -- 71},
  year      = {2009},
  language  = {de}
}
@article{DoeringKuhnhenneHellbergetal.2008,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Hellberg, Jan and Feldmann, Markus},
  title     = {Aktive und passive Temperierung eines Stahldeckensystems : thermische Bauteilaktivierung : numerische und messtechnische Untersuchungen. T. 2.},
  series = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 59},
  journal   = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 11},
  issn      = {1436-5103},
  pages     = {37 -- 41},
  year      = {2008},
  language  = {de}
}
@article{DoeringKuhnhenneHellbergetal.2008,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Hellberg, Jan and Feldmann, Markus},
  title     = {Aktive und passive Temperierung eines Stahldeckensystems : numerische und messtechnische Untersuchungen. T. 1},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 59},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 10},
  issn      = {1436-5103, 0017-9906, 1434-422X, 1436-5103},
  pages     = {54 -- 60},
  year      = {2008},
  language  = {de}
}
@article{FeldmannDoeringKuhnhenneetal.2008,
  author    = {Feldmann, Markus and D{\"o}ring, Bernd and Kuhnhenne, Markus and Sedlacek, Gerhard},
  title     = {Zum Thema "Nachhaltigkeit" in der Stahlbauindustrie},
  series = {Stahlbau},
  volume    = {Vol. 77},
  journal   = {Stahlbau},
  number    = {Iss. 10},
  issn      = {0038-9145},
  pages     = {713 -- 720},
  year      = {2008},
  language  = {de}
}
@article{DoeringHechlerWeberetal.2004,
  author    = {D{\"o}ring, Bernd and Hechler, O. and Weber, F. and Sedlacek, Gerhard},
  title     = {Thermische Aktivierung von Fertigteildecken},
  series = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Jg. 55},
  journal   = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {Nr. 5},
  issn      = {1436-5103},
  pages     = {24 -- 35},
  year      = {2004},
  language  = {de}
}
@article{ZillerDoering2004,
  author    = {Ziller, Claudia and D{\"o}ring, Bernd},
  title     = {Doppelfassaden - vom Experimentalmodell zum Massanzug},
  series = {TAB Technik am Bau},
  volume    = {Bd. 35},
  journal   = {TAB Technik am Bau},
  number    = {H. 12},
  issn      = {0341-2032},
  pages     = {58 -- 63},
  year      = {2004},
  language  = {de}
}
@article{ThielDoering2001,
  author    = {Thiel, Dieter and D{\"o}ring, Bernd},
  title     = {Dezentrale Raumklimatisierung durch die Fassade},
  series = {TAB Technik am Bau},
  volume    = {Bd. 32},
  journal   = {TAB Technik am Bau},
  number    = {H. 3},
  issn      = {0341-2032},
  pages     = {67 -- 76},
  year      = {2001},
  language  = {de}
}
@article{KuckDoering1997,
  author    = {Kuck, Herbert and D{\"o}ring, Bernd},
  title     = {Regenerative Energien in Landesbauten : Land NRW unterst{\"u}tzt Einsatz erneuerbarer Energien 1997 mit 15 Mio. DM},
  series = {Die Bauverwaltung mit Bauamt und Gemeindebau},
  volume    = {Bd. 70},
  journal   = {Die Bauverwaltung mit Bauamt und Gemeindebau},
  number    = {H. 8},
  issn      = {0005-6847},
  pages     = {384 -- 386},
  year      = {1997},
  language  = {de}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective laser melting of metals: desktop machines open up new chances even for small companies},
  series = {Advanced materials research},
  volume    = {622-623},
  journal   = {Advanced materials research},
  publisher = {Trans Tech Publ.},
  address   = {Baech},
  issn      = {1662-8985 (E-Journal); 1022-6680 (Print)},
  doi       = {10.4028/www.scientific.net/AMR.622-623.461},
  pages     = {461 -- 465},
  year      = {2012},
  abstract  = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.},
  language  = {en}
}
@article{Knueppel2012,
  author    = {Kn{\"u}ppel, Mark},
  title     = {Außerbilanzielle Korrekturen},
  series = {Handbuch der Bilanzierung online},
  journal   = {Handbuch der Bilanzierung online},
  editor    = {Federmann, Rudolf and Kußmaul, Heinz and M{\"u}ller, Stefan},
  publisher = {Haufe},
  address   = {Freiburg},
  issn      = {0172-0392},
  pages     = {Artikel HI 1380074},
  year      = {2012},
  language  = {de}
}
@article{SabitovaEbertLenzetal.2013,
  author    = {Sabitova, A. and Ebert, Ph. and Lenz, A. and Schaafhausen, S. and Ivanova, L. and D{\"a}hne, M. and Hoffmann, A. and Dunin-Borkowski, R. E. and F{\"o}rster, Arnold and Grandidier, B. and Eisele, H.},
  title     = {Intrinsic bandgap of cleaved ZnO(112¯0) surfaces},
  series = {Applied physics letters},
  volume    = {Vol. 102},
  journal   = {Applied physics letters},
  issn      = {1077-3118 (E-Journal); 0003-6951 (Print)},
  pages     = {021608},
  year      = {2013},
  language  = {en}
}
@article{JiminezGermanBehbahaniMiettinenetal.2013,
  author    = {Jiminez German, Salvador and Behbahani, Mehdi and Miettinen, Susanna and Grijpma, Dirk W. and Haimi, Suvi P.},
  title     = {Proliferation and differentiation of adipose stem cells towards smooth muscle cells on poly(trimethylene carbonate) membranes},
  series = {Macromolecular symposia},
  volume    = {Vol. 334},
  journal   = {Macromolecular symposia},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {0258-0322},
  pages     = {133 -- 142},
  year      = {2013},
  language  = {en}
}
@article{HellwigVolkmann2005,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Neighborhood conditions for graphs and digraphs to be maximally edge-connected},
  series = {Australasian journal of combinatorics},
  volume    = {Vol. 33},
  journal   = {Australasian journal of combinatorics},
  issn      = {10344942 ; 22023518},
  pages     = {265 -- 277},
  year      = {2005},
  language  = {en}
}
@article{HellwigVolkmann2005,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Sufficient conditions for graphs to be λ′-optimal, super-edge-connected, and maximally edge-connected},
  series = {Journal of graph theory},
  volume    = {Vol. 48},
  journal   = {Journal of graph theory},
  number    = {Iss. 3},
  issn      = {03649024},
  pages     = {228 -- 246},
  year      = {2005},
  language  = {en}
}
@article{XuLueMaetal.2005,
  author    = {Xu, Jung-Ming and L{\"u}, Min and Ma, Meijie and Hellwig, Angelika},
  title     = {Super connectivity of line graphs},
  series = {Information processing letters},
  volume    = {Vol. 94},
  journal   = {Information processing letters},
  number    = {Iss. 4},
  issn      = {1872-6119 (E-Journal); 0020-0190 (Print)},
  pages     = {191 -- 195},
  year      = {2005},
  language  = {en}
}
@article{HellwigRautenbachVolkmann2004,
  author    = {Hellwig, Angelika and Rautenbach, Dieter and Volkmann, Lutz},
  title     = {Note on the connectivity of line graphs},
  series = {Information processing letters},
  volume    = {Vol. 91},
  journal   = {Information processing letters},
  number    = {Iss. 1},
  issn      = {1872-6119 (E-Journal); 0020-0190 (Print)},
  pages     = {7 -- 10},
  year      = {2004},
  language  = {en}
}
@article{HellwigVolkmann2004,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Maximally local-edge-connected graphs and digraphs},
  series = {Ars combinatoria},
  volume    = {Vol. 72},
  journal   = {Ars combinatoria},
  issn      = {0381-7032},
  pages     = {295 -- 306},
  year      = {2004},
  language  = {en}
}
@article{HellwigVolkmann2004,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Neighborhood and degree conditions for super-edge-connected bipartite digraphs},
  series = {Results in mathematics},
  volume    = {Vol. 45},
  journal   = {Results in mathematics},
  number    = {Iss. 1-2},
  issn      = {1420-9012 (E-Journal); 1422-6383 (Print)},
  pages     = {45 -- 58},
  year      = {2004},
  language  = {en}
}
@article{HellwigVolkmann2004,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Sufficient conditions for λ′-optimality in graphs of diameter 2},
  series = {Discrete mathematics},
  volume    = {Vol. 283},
  journal   = {Discrete mathematics},
  number    = {Iss. 1-3},
  issn      = {1872-681X (E-Journal); 0012-365X (Print)},
  pages     = {113 -- 120},
  year      = {2004},
  language  = {en}
}
@article{HellwigVolkmann2003,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Maximally edge-connected digraphs},
  series = {Australasian journal of combinatorics},
  volume    = {Vol. 27},
  journal   = {Australasian journal of combinatorics},
  issn      = {1034-4942 (E-Journal); 1034-4942 (Print)},
  pages     = {23 -- 32},
  year      = {2003},
  language  = {en}
}
@article{HeinzeMangPeteretal.2014,
  author    = {Heinze, Daniel and Mang, Thomas and Peter, Karin and M{\"o}ller, Martin and Weichold, Oliver},
  title     = {Synthesis of low molecular weight poly(vinyl acetate) and its application as plasticizer},
  series = {Journal of applied polymer science},
  volume    = {131},
  journal   = {Journal of applied polymer science},
  number    = {9},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1097-4628 (E-Journal); 0021-8995 (Print)},
  doi       = {10.1002/app.40226},
  pages     = {Article No. 40226},
  year      = {2014},
  abstract  = {Poly(vinyl acetate), PVAc, with a degree of polymerization Xn = 10 was prepared by chain-transfer radical polymerization using carbon tetrachloride and used as oligomeric plasticizer for commercial PVAc. However, the chlorinated chain ends cause a low thermal stability requiring mild Cl/H substitution. The product exhibits high thermal stability and excellent melt-compounding properties. Blends of oligomeric and commercial PVAc show single glass transition temperatures which decrease with higher oligomer content and exhibit small negative deviations from Fox' linear additivity rule. This indicates plasticization and miscibility being mainly due to entropic effects. Injection-moulded thick specimens show ductile behaviour at oligomer contents >10 wt \%, while sheets with a thickness of 0.2-0.5 mm appear flexible already at 7.5 wt \%. The oxygen permeability coefficients are an order of magnitude lower than those of low-density polyethylene. Due to the sum of their properties, the plasticized sheets present a promising alternative in the preparation of barrier materials.},
  language  = {en}
}
@article{Goldbach2010,
  author    = {Goldbach, Daniel},
  title     = {Fahrstabilit{\"a}tserh{\"o}hung bei Gespannen durch Querverschiebung des Anh{\"a}ngerkupplungspunktes},
  series = {mechatronik mobil},
  volume    = {2},
  journal   = {mechatronik mobil},
  number    = {1},
  publisher = {Expert Verlag},
  address   = {Renningen},
  issn      = {1867-7371},
  pages     = {23 -- 29},
  year      = {2010},
  language  = {de}
}
@article{DankelmannHellwigVolkmann2009,
  author    = {Dankelmann, Peter and Hellwig, Angelika and Volkmann, Lutz},
  title     = {Inverse degree and edge-connectivity},
  series = {Discrete mathematics},
  volume    = {Vol. 309},
  journal   = {Discrete mathematics},
  number    = {Iss. 9},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-681X (E-Journal); 0012-365X (Print)},
  pages     = {2943 -- 2947},
  year      = {2009},
  language  = {en}
}
@article{HellwigVolkmann2008,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Maximally edge-connected and vertex-connected graphs and digraphs : a survey},
  series = {Discrete mathematics},
  volume    = {Vol. 308},
  journal   = {Discrete mathematics},
  number    = {Iss. 15},
  issn      = {1872-681X (E-Journal); 0012-365X (Print)},
  pages     = {3265 -- 3296},
  year      = {2008},
  language  = {en}
}
@article{HellwigVolkmann2008,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {The connectivity of a graph and its complement},
  series = {Discrete applied mathematics},
  volume    = {Vol. 156},
  journal   = {Discrete applied mathematics},
  number    = {Iss. 17},
  issn      = {0166-218X (E-Journal); 1872-6771 (E-Journal); 0166-218X (Print)},
  pages     = {3325 -- 3328},
  year      = {2008},
  language  = {en}
}
@article{DankelmannHellwigVolkmann2007,
  author    = {Dankelmann, Peter and Hellwig, Angelika and Volkmann, Lutz},
  title     = {On the connectivity of diamond-free graphs},
  series = {Discrete applied mathematics},
  volume    = {Vol. 155},
  journal   = {Discrete applied mathematics},
  number    = {Iss. 16},
  issn      = {0166-218X (E-Journal); 1872-6771 (E-Journal); 0166-218X (Print)},
  pages     = {2111 -- 2117},
  year      = {2007},
  language  = {en}
}
@article{HellwigVolkmann2006,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {Lower bounds on the vertex-connectivity of digraphs and graphs},
  series = {Information processing letters},
  volume    = {Vol. 99},
  journal   = {Information processing letters},
  number    = {Iss. 2},
  issn      = {1872-6119 (E-Journal); 0020-0190 (Print)},
  pages     = {41 -- 46},
  year      = {2006},
  language  = {en}
}
@article{HellwigVolkmann2006,
  author    = {Hellwig, Angelika and Volkmann, Lutz},
  title     = {On connectivity in graphs with given clique number},
  series = {Journal of graph theory},
  volume    = {Vol. 52},
  journal   = {Journal of graph theory},
  number    = {Iss. 1},
  issn      = {03649024 ; 10970118},
  pages     = {7 -- 14},
  year      = {2006},
  language  = {en}
}