@article{NiehausGaborWielandetal.2011,
  author    = {Niehaus, F. and Gabor, E. and Wieland, S. and Siegert, Petra and Maurer, Karl-Heinz and Eck, J.},
  title     = {Enzymes for the laundry industries: tapping the vast metagenomic pool of alkaline proteases},
  series = {Microbial biotechnology},
  volume    = {Vol. 4},
  journal   = {Microbial biotechnology},
  number    = {Iss. 6},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0614 (E-Journal); 0171-1741 (Print); 0175-7598 (Print); 0340-2118 (Print)},
  pages     = {767 -- 776},
  year      = {2011},
  language  = {en}
}
@article{RibitschHeumannKarletal.2012,
  author    = {Ribitsch, D. and Heumann, S. and Karl, W. and Gerlach, J. and Leber, R. and Birner-Gruenberger, R. and Gruber, K. and Eiteljoerg, I. and Remler, P. and Siegert, Petra and Lange, J. and Maurer, Karl-Heinz and Berg, G. and Guebitz, G. M. and Schwab, H.},
  title     = {Extracellular serine proteases from Stenotrophomonas maltophilia: Screening, isolation and heterologous expression in E. coli},
  series = {Journal of biotechnology},
  volume    = {157},
  journal   = {Journal of biotechnology},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2011.09.025},
  pages     = {140 -- 147},
  year      = {2012},
  abstract  = {A large strain collection comprising antagonistic bacteria was screened for novel detergent proteases. Several strains displayed protease activity on agar plates containing skim milk but were inactive in liquid media. Encapsulation of cells in alginate beads induced protease production. Stenotrophomonas maltophilia emerged as best performer under washing conditions. For identification of wash-active proteases, four extracellular serine proteases called StmPr1, StmPr2, StmPr3 and StmPr4 were cloned. StmPr2 and StmPr4 were sufficiently overexpressed in E. coli. Expression of StmPr1 and StmPr3 resulted in unprocessed, insoluble protein. Truncation of most of the C-terminal domain which has been identified by enzyme modeling succeeded in expression of soluble, active StmPr1 but failed in case of StmPr3. From laundry application tests StmPr2 turned out to be a highly wash-active protease at 45 °C. Specific activity of StmPr2 determined with suc-l-Ala-l-Ala-l-Pro-l-Phe-p-nitroanilide as the substrate was 17 ± 2 U/mg. In addition we determined the kinetic parameters and cleavage preferences of protease StmPr2.},
  language  = {en}
}
@article{SchmitzWeber2012,
  author    = {Schmitz, Philipp and Weber, Martin},
  title     = {Buying and selling behavior of individual investors in option-like securities},
  series = {Die Betriebswirtschaft : DBW},
  volume    = {72},
  journal   = {Die Betriebswirtschaft : DBW},
  number    = {5},
  publisher = {Sch{\"a}ffer-Poeschel},
  address   = {Stuttgart},
  issn      = {0342-7064},
  doi       = {10.2139/ssrn.2055088},
  pages     = {409 -- 426},
  year      = {2012},
  abstract  = {We analyze the trading behavior of individual investors in option-like securities, namely bankissued warrants, and thus expand the growing literature of investors behavior to a new kind of securities. A unique data set from a large German discount broker gives us the opportunity to analyze the trading behavior of 1,454 investors, making 89,958 transactions in 6,724 warrants on 397 underlyings. In different logit regression, we make use of the facts that investors can speculate on rising and falling prices of the underlying with call and put warrants and that we also have information about the stock portfolios of the investors. We report several facts about the trading behavior of individual investors in warrants that are consistent with the literature on the behavior of individual investors in the stock market. The warrant investors buy calls and sell puts if the price of the underlying has decreased over the past trading days and they sell calls and buy puts if the price of the underlying has increased. That means, the investors follow negative feedback trading strategies in all four trading categories observed. In addition, we find strong evidence for the disposition effect for call as well as put warrants, which is reversed in December. The trading behavior is also influenced if the underlying reaches some exceptionally prices, e.g. highs, lows or the strike price. We show that hedging, as one natural candidate to buy puts, does not play an important role in the market for bank-issued warrants.},
  language  = {en}
}
@article{SchmitzWeber2007,
  author    = {Schmitz, Philipp and Weber, Martin},
  title     = {Buying and selling behavior of individual investors in option-like securities},
  pages     = {1 -- 36},
  year      = {2007},
  language  = {en}
}
@article{GlaserSchmitz2007,
  author    = {Glaser, Markus and Schmitz, Philipp},
  title     = {Privatanleger am Optionsscheinmarkt},
  series = {Zeitschrift f{\"u}r Bankrecht und Bankwirtschaft : ZBB},
  volume    = {Jg. 19},
  journal   = {Zeitschrift f{\"u}r Bankrecht und Bankwirtschaft : ZBB},
  number    = {H. 3},
  issn      = {0936-2800},
  pages     = {214 -- 230},
  year      = {2007},
  language  = {de}
}
@article{GlaserSchmitz2006,
  author    = {Glaser, Markus and Schmitz, Philipp},
  title     = {Privatanleger am Optionsscheinmarkt},
  pages     = {1 -- 46},
  year      = {2006},
  language  = {de}
}
@article{MeinersBaumann1997,
  author    = {Meiners, Klaus and Baumann, Marcus},
  title     = {Lokale Beitr{\"a}ge zum globalen Klimaschutz},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {19},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {84},
  issn      = {0172-1623},
  pages     = {6 -- 12},
  year      = {1997},
  language  = {de}
}
@article{BaumannGronsfeldSchuetzLembach1997,
  author    = {Baumann, Marcus and Gronsfeld, A. and Sch{\"u}tz-Lembach, G.},
  title     = {Nachdenklichkeit {\"u}ber Nachhaltigkeit : wie uns ein neues Wort alte Probleme neu entdecken l{\"a}ßt},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {19},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {87},
  issn      = {0172-1623},
  pages     = {6 -- 11},
  year      = {1997},
  language  = {de}
}
@article{BaumannPeschel1998,
  author    = {Baumann, Marcus and Peschel, G.},
  title     = {Aktuelle Entwicklungen zur Luftreinhaltung in der Stadt Aachen},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {20},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {91},
  issn      = {0172-1623},
  pages     = {22 -- 29},
  year      = {1998},
  language  = {de}
}
@article{BaumannPeschel1998,
  author    = {Baumann, Marcus and Peschel, G.},
  title     = {Das Klima Aachens, lokale Anspr{\"u}che und globale Auswirkungen},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {20},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {93},
  issn      = {0172-1623},
  pages     = {26 -- 33},
  year      = {1998},
  language  = {de}
}
@article{WiezorekBaumann1999,
  author    = {Wiezorek, E. and Baumann, Marcus},
  title     = {Stadt{\"o}kologie in der Stadtplanung: der "Stadt{\"o}kologische Beitrag" Aachen},
  series = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  volume    = {21},
  journal   = {Wechselwirkung : Wissenschaft \& vernetztes Denken},
  number    = {97},
  issn      = {0172-1623},
  pages     = {28 -- 37},
  year      = {1999},
  language  = {de}
}
@article{RibitschHeumannTrotschaetal.2011,
  author    = {Ribitsch, D. and Heumann, S. and Trotscha, E. and Herrero Acero, E. and Greimel, K. and Leber, R. and Birger-Gruenberger, R. and Deller, S. and Eiteljoerg, I. and Remler, P. and Weber, Th. and Siegert, Petra and Maurer, Karl-Heinz and Donelli, I. and Freddi, G. and Schwab, H. and Guebitz, G. M.},
  title     = {Hydrolysis of polyethyleneterephthalate by p-nitrobenzylesterase from Bacillus subtilis},
  series = {Biotechnology progress},
  volume    = {Vol. 27},
  journal   = {Biotechnology progress},
  number    = {Iss. 4},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {1520-6033 (E-Journal); 8756-7938 (Print)},
  pages     = {951 -- 960},
  year      = {2011},
  language  = {en}
}
@article{RibitschKarlBirnerGruenbergeretal.2010,
  author    = {Ribitsch, D. and Karl, W. and Birner-Gruenberger, R. and Gruber, K. and Eiteljoerg, I. and Remler, P. and Wieland, S. and Siegert, Petra and Maurer, Karl-Heinz and Schwab, H.},
  title     = {C-terminal truncation of a metagenome-derived detergent protease for effective expression in E. coli},
  series = {Journal of biotechnology},
  volume    = {150},
  journal   = {Journal of biotechnology},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4863 (E-Journal); 0168-1656 (Print)},
  doi       = {10.1016/j.jbiotec.2010.09.947},
  pages     = {408 -- 416},
  year      = {2010},
  abstract  = {Recently, a new alkaline protease named HP70 showing highest homology to extracellular serine proteases of Stenotrophomonas maltophilia and Xanthomonas campestris was found in the course of a metagenome screening for detergent proteases (Niehaus et al., submitted for publication). Attempts to efficiently express the enzyme in common expression hosts had failed. This study reports on the realization of overexpression in Escherichia coli after structural modification of HP70. Modelling of HP70 resulted in a two-domain structure, comprising the catalytic domain and a C-terminal domain which includes about 100 amino acids. On the basis of the modelled structure the enzyme was truncated by deletion of most of the C-terminal domain yielding HP70-C477. This structural modification allowed effective expression of active enzyme using E. coli BL21-Gold as the host. Specific activity of HP70-C477 determined with suc-l-Ala-l-Ala-l-Pro-l-Phe-p-nitroanilide as the substrate was 30 ± 5 U/mg compared to 8 ± 1 U/mg of the native enzyme. HP70-C477 was most active at 40 °C and pH 7-11; these conditions are prerequisite for a potential application as detergent enzyme. Determination of kinetic parameters at 40 °C and pH = 9.5 resulted in KM = 0.23 ± 0.01 mM and kcat = 167.5 ± 3.6 s⁻¹. MS-analysis of peptide fragments obtained from incubation of HP70 and HP70-C477 with insulin B indicated that the C-terminal domain influences the cleavage preferences of the enzyme. Washing experiments confirmed the high potential of HP70-C477 as detergent protease.},
  language  = {en}
}
@article{SiegertMcLeishBaumannetal.2005,
  author    = {Siegert, Petra and McLeish, Michael J. and Baumann, Martin and Iding, Hans and Kneen, Malea M. and Kenyon, George L. and Pohl, Martina},
  title     = {Exchanging the substrate specificities of pyruvate decarboxylase from Zymomonas mobilis and benzoylformate decarboxylase from Pseudomonas putida},
  series = {Protein engineering, design, and selection : peds},
  volume    = {Vol. 18},
  journal   = {Protein engineering, design, and selection : peds},
  number    = {Iss. 7},
  issn      = {1460-213X (E-Journal); 1741-0134 (E-Journal); 0269-2139 (Print); 1741-0126 (Print)},
  pages     = {345 -- 357},
  year      = {2005},
  language  = {en}
}
@article{DuenkelmannKolterJungNitscheetal.2002,
  author    = {D{\"u}nkelmann, Pascal and Kolter-Jung, Doris and Nitsche, Adam and Demir, Ayhan S. and Siegert, Petra and Lingen, Bettina and Baumann, Martin and Pohl, Martina and M{\"u}ller, Michael},
  title     = {Development of a donor-acceptor concept for enzymatic cross-coupling reactions of adehydes : the first asymmetric cross-benzoin condensation},
  series = {Journal of the American Chemical Society},
  volume    = {Vol. 124},
  journal   = {Journal of the American Chemical Society},
  issn      = {1520-5126 (E-Journal); 0002-7863 (Print)},
  pages     = {12084 -- 12085},
  year      = {2002},
  language  = {en}
}
@article{DuennwaldDemirSiegertetal.2001,
  author    = {D{\"u}nnwald, Thomas and Demir, Ayhan S. and Siegert, Petra and Pohl, Martina and M{\"u}ller, Michael},
  title     = {ChemInform Abstract: Enantioselective synthesis of (S)-2-Hydroxypropanone derivatives by Benzoylformate Decarboxylase Catalyzed C—C Bond Formation},
  series = {Cheminform},
  volume    = {Vol. 32},
  journal   = {Cheminform},
  number    = {Iss. 4},
  issn      = {1522-2667 (E-Journal); 0931-7597 (Print)},
  pages     = {Publ. online},
  year      = {2001},
  language  = {en}
}
@article{DuennwaldDemirSiegertetal.2000,
  author    = {D{\"u}nnwald, Thomas and Demir, Ayhan S. and Siegert, Petra and Pohl, Martina and M{\"u}ller, Michael},
  title     = {Enantioselective Synthesis of (S)-2-Hydroxypropanone Derivatives by Benzoylformate Decarboxylase Catalyzed C-C Bond Formation},
  series = {European journal of organic chemistry},
  volume    = {Vol. 2000},
  journal   = {European journal of organic chemistry},
  number    = {Iss. 11},
  issn      = {0365-5490 (E-Journal); 1099-0690 (E-Journal); 0075-4617 (Print); 0170-2041 (Print); 0947-3440 (Print); 1434-193X (Print); 1434-243X (Print)},
  pages     = {2161 -- 2170},
  year      = {2000},
  language  = {en}
}
@article{IdingDuennwaldGreineretal.2000,
  author    = {Iding, Hans and D{\"u}nnwald, Thomas and Greiner, Lasse and Liese, Andreas and M{\"u}ller, Michael and Siegert, Petra and Gr{\"o}tzinger, Joachim and Demir, Ayhan S. and Pohl, Martina},
  title     = {Benzoylformate Decarboxylase from Pseudomonas putida as Stable Catalyst for the Synthesis of Chiral 2-Hydroxy Ketones},
  series = {Chemistry - a European journal},
  volume    = {Vol. 6},
  journal   = {Chemistry - a European journal},
  number    = {Iss. 8},
  issn      = {1521-3765 (E-Journal); 0947-6539 (Print)},
  pages     = {1483 -- 1495},
  year      = {2000},
  language  = {en}
}
@article{AlebouyehSamamiPieperBreitbachetal.2014,
  author    = {Alebouyeh Samami, Behzad and Pieper, Martin and Breitbach, Gerd and Hodapp, Josef},
  title     = {Heat production in the windings of the stators of electric machines under stationary condition},
  series = {Heat and mass transfer},
  volume    = {50},
  journal   = {Heat and mass transfer},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0947-7411 (Print) ; 1432-1181 (E-Journal)},
  doi       = {10.1007/s00231-014-1371-8},
  pages     = {1707 -- 1716},
  year      = {2014},
  abstract  = {In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.},
  language  = {en}
}
@article{GuoSekiMiyamotoetal.2014,
  author    = {Guo, Yuanyuan and Seki, Kosuke and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Novel photoexcitation method for light-addressable potentiometric sensor with higher spatial resolution},
  series = {Applied physics express : APEX},
  volume    = {7},
  journal   = {Applied physics express : APEX},
  number    = {6},
  publisher = {IOP},
  address   = {Bristol},
  issn      = {1882-0786 (E-Journa); 1882-0778 (Print)},
  doi       = {10.7567/APEX.7.067301},
  pages     = {067301-4},
  year      = {2014},
  abstract  = {A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) is proposed to achieve a higher spatial resolution of chemical images. The proposed method employs a combined light source that consists of a modulated light probe, which generates the alternating photocurrent signal, and a ring of constant illumination surrounding it. The constant illumination generates a sheath of carriers with increased concentration which suppresses the spread of photocarriers by enhanced recombination. A device simulation was carried out to verify the effect of constant illumination on the spatial resolution, which demonstrated that a higher spatial resolution can be obtained.},
  language  = {en}
}
@article{WhiteheadOehlschlaegerAlmajhdietal.2014,
  author    = {Whitehead, Mark and {\"O}hlschl{\"a}ger, Peter and Almajhdi, Fahad N. and Alloza, Leonor and Marz{\´a}bal, Pablo and Meyers, Ann E. and Hitzeroth, Inga I. and Rybicki, Edward P.},
  title     = {Human papillomavirus (HPV) type 16 E7 protein bodies cause tumour regression in mice},
  series = {BMC cancer},
  journal   = {BMC cancer},
  number    = {14:367},
  publisher = {BioMed Central},
  address   = {London},
  issn      = {1471-2407},
  doi       = {10.1186/1471-2407-14-367},
  pages     = {1 -- 15},
  year      = {2014},
  language  = {en}
}
@article{Timme2014,
  author    = {Timme, Michael},
  title     = {Wohnungseigent{\"u}mergemeinschaft - Einstimmigkeitserfordernis bei Errichtung einer Mobilfunkantenne},
  series = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  volume    = {68 (2014)},
  journal   = {Monatsschrift f{\"u}r Deutsches Recht : MDR : Zeitschrift f{\"u}r die Zivilrechts-Praxis},
  number    = {11},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {0340-1812},
  pages     = {634 -- 635},
  year      = {2014},
  abstract  = {Der BGH (BGH v. 25.1.2014 - V ZR 48/13, MDR 2014, 399) hatte dar{\"u}ber zu befinden, ob auf dem Dach eines Hauses, das im Eigentum einer Wohnungseigent{\"u}mergemeinschaft steht, auch gegen den Willen eines einzelnen Eigent{\"u}mers eine Mobilfunkantenne angebracht werden kann. Das Urteil f{\"u}hrt in das Spannungsfeld einer Abw{\"a}gung zwischen Mehrheits- und Individualinteressen innerhalb einer WEG. Insoweit betont der BGH den grunds{\"a}tzlichen Vorrang der Individualinteressen, jedenfalls soweit es um Beeintr{\"a}chtigungen geht, die verst{\"a}ndlicherweise von einem Eigent{\"u}mer abgelehnt werden k{\"o}nnen. Der BGH verlangt im Ergebnis im Zweifel eine allseitige Zustimmung. Das Urteil ist zu begr{\"u}ßen, l{\"a}sst aber f{\"u}r die Zukunft Abgrenzungsfragen offen.},
  language  = {de}
}
@article{WagnerDollSchoening2014,
  author    = {Wagner, Patrick and Doll, Theodor and Sch{\"o}ning, Michael Josef},
  title     = {Engineering of functional interfaces / Patrick Wagner ; Theodor Doll ; Michael J. Sch{\"o}ning (eds.)},
  series = {Physica status solidi (A) : Applications and materials science},
  volume    = {211},
  journal   = {Physica status solidi (A) : Applications and materials science},
  number    = {6},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-396X (E-Book); 1862-6319 (E-Book); 0031-8965 (Print); 1862-6300 (Print)},
  doi       = {10.1002/pssa.201470241},
  pages     = {1339 -- 1339},
  year      = {2014},
  language  = {en}
}
@article{VieiradaSilvaSchwarzerHoffschmidtetal.2013,
  author    = {Vieira da Silva, Maria Eugenia and Schwarzer, Klemens and Hoffschmidt, Bernhard and Pinheiro Rodrigues, Frederico and Schwarzer, Tarik and Costa Rocha, Paulo Alexandre},
  title     = {Mass transfer correlation for evaporation-condensation thermal process in the range of 70 °C-95 °C},
  series = {Renewable energy},
  volume    = {Vol. 53},
  journal   = {Renewable energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1879-0682 (E-Journal); 0960-1481 (Print)},
  pages     = {174 -- 179},
  year      = {2013},
  language  = {en}
}
@article{IdingSiegertMeschetal.1998,
  author    = {Iding, Hans and Siegert, Petra and Mesch, K. and Pohl, Martina},
  title     = {Application of α-keto acid decarboxylases in biotransformations},
  series = {Biochimica et biophysica acta (BBA) - Protein structure and molecular enzymology},
  volume    = {Vol. 1385},
  journal   = {Biochimica et biophysica acta (BBA) - Protein structure and molecular enzymology},
  number    = {Iss. 2},
  issn      = {1879-2588 (E-Journal); 0167-4838 (Print)},
  pages     = {307 -- 322},
  year      = {1998},
  language  = {en}
}
@article{PohlSiegertMeschetal.1998,
  author    = {Pohl, Martina and Siegert, Petra and Mesch, K. and Bruhn, H. and Gr{\"o}tzinger, Joachim},
  title     = {Active site mutants of pyruvate decarboxylase from Zymomonas mobilis : a site-directed mutagenesis study of L112, I472, I476, E473 and N482},
  series = {European journal of biochemistry},
  volume    = {Vol. 257},
  journal   = {European journal of biochemistry},
  number    = {Iss. 3},
  issn      = {1432-1033 (E-Journal); 1742-4658 (E-Journal); 0014-2956 (Print); 1742-464X (Print)},
  pages     = {538 -- 546},
  year      = {1998},
  language  = {en}
}
@article{RaueWambachGloeggleretal.2014,
  author    = {Raue, Markus and Wambach, M. and Gl{\"o}ggler, S. and Grefen, Dana and Kaufmann, R. and Abetz, C. and Georgopanos, P. and Handge, U. A. and Mang, Thomas and Bl{\"u}mich, B. and Abetz, V.},
  title     = {Investigation of historical hard rubber ornaments of Charles Goodyear},
  series = {Macromolecular chemistry and physics},
  volume    = {Vol. 215},
  journal   = {Macromolecular chemistry and physics},
  number    = {No. 3},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1022-1352},
  pages     = {245 -- 254},
  year      = {2014},
  language  = {en}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Im Sog des Standards : Windows CE als Betriebssystem f{\"u}r Embedded Controller},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 47},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 9},
  issn      = {0013-5658},
  pages     = {40 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Alles automatisch : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Elektrotechnik f{\"u}r die Automatisierung},
  volume    = {Bd. 80},
  journal   = {Elektrotechnik f{\"u}r die Automatisierung},
  number    = {H. 4},
  issn      = {0013-581X},
  pages     = {196 -- 199},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Zwergen-Anatomie : Aufbau von und Entwicklung f{\"u}r Windows CE},
  series = {C't : Magazin f{\"u}r Computertechnik},
  journal   = {C't : Magazin f{\"u}r Computertechnik},
  number    = {H. 8},
  issn      = {0724-8679},
  pages     = {148 -- 151},
  year      = {1998},
  language  = {de}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Softwaretrends in der Automatisierungstechnik},
  series = {Etz : Elektrotechnik \& Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  volume    = {126},
  journal   = {Etz : Elektrotechnik \& Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)},
  number    = {S2},
  issn      = {0948-7387},
  pages     = {74 -- 79},
  year      = {2005},
  language  = {de}
}
@article{Wollert2005,
  author    = {Wollert, J{\"o}rg},
  title     = {Die n{\"a}chste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {H. 2},
  issn      = {0013-5658 ; 1611-5120},
  pages     = {40 -- 44},
  year      = {2005},
  language  = {de}
}
@article{SchreiberBarkschatKraftetal.2015,
  author    = {Schreiber, Marc and Barkschat, Kai and Kraft, Bodo and Z{\"u}ndorf, Albert},
  title     = {Quick Pad Tagger : An Efficient Graphical User Interface for Building Annotated Corpora with Multiple Annotation Layers},
  series = {Computer Science \& Information Technology (CS \& IT)},
  volume    = {5},
  journal   = {Computer Science \& Information Technology (CS \& IT)},
  number    = {4},
  publisher = {Academy \& Industry Research Collaboration Center (AIRCC)},
  isbn      = {978-1-921987-32-8},
  issn      = {2231 - 5403},
  doi       = {10.5121/csit.2015.50413},
  pages     = {131 -- 143},
  year      = {2015},
  language  = {en}
}
@article{Wollert2007,
  author    = {Wollert, J{\"o}rg},
  title     = {UWB, ZigBee und Z-Wave in der Automatisierung : neue Konkurrenzsituation bei Short Range Wireless?},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 2},
  issn      = {0013-5658},
  pages     = {62 -- 65},
  year      = {2007},
  language  = {de}
}
@article{WollertKruseVedral2007,
  author    = {Wollert, J{\"o}rg and Kruse, Thomas and Vedral, Andreas},
  title     = {Die Kraft der drei Antennen : zuverl{\"a}ssige Funkkommunikation f{\"u}r die Automatisierungstechnik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {56},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. 2},
  issn      = {0013-5658; 1611-5120},
  pages     = {36 -- 42},
  year      = {2007},
  language  = {de}
}
@article{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Zeitweise : Windows NT und die Echtzeit},
  series = {Elrad - Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {Elrad - Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 4},
  issn      = {0170-1827},
  pages     = {71 -- 73},
  year      = {1997},
  language  = {de}
}
@article{Wollert1997,
  author    = {Wollert, J{\"o}rg},
  title     = {Doping f{\"u}r den Betriebssystem-Kern : Echtzeit-L{\"o}sungen f{\"u}r Windows NT im Vergleich},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 46},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 20},
  issn      = {0013-5658},
  pages     = {46 -- 50},
  year      = {1997},
  language  = {de}
}
@article{Wollert2007,
  author    = {Wollert, J{\"o}rg},
  title     = {Funk f{\"u}r die Sicherheit auf vier R{\"a}dern : Chancen und Herausforderungen in der Fahrzeug-Umwelt-Kommunikation},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {H. 8},
  issn      = {1614-0125},
  pages     = {78 -- 83},
  year      = {2007},
  language  = {de}
}
@article{WollertLeidinger2010,
  author    = {Wollert, J{\"o}rg and Leidinger, Rafael},
  title     = {Automation trifft Automotive : SPS in der Fahrzeugtechnik},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {4/5},
  publisher = {WEKA Fachmedien},
  address   = {Haar},
  issn      = {1614-0125},
  pages     = {44 -- 48},
  year      = {2010},
  abstract  = {Eine SPS im Kraftfahrzeug? Das geht ja gar nicht - da gibt es doch all die Hersteller f{\"u}r Kfz-Steuerger{\"a}te, die konfigurierbare Hardware anbieten. Im Prinzip ja, aber leider sind gerade die Sensoren oder Aktoren nicht ansteuerbar, die der Entwickler genau f{\"u}r sein aktuelles Projekt ben{\"o}tigt. Dieser Beitrag gibt einen kleinen Einblick in neue M{\"o}glichkeiten des Rapid Prototyping f{\"u}r mechatronische Systeme auf der Basis von Speicherprogrammierbaren Steuerungen (SPS).},
  language  = {de}
}
@article{Wollert2003,
  author    = {Wollert, J{\"o}rg},
  title     = {Dot net und Sun ONE - Wettbewerb oder Mitspieler? Neue Programmiermodelle machen das Web interaktiv},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 52},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 19},
  issn      = {0013-5658},
  pages     = {72 -- 81},
  year      = {2003},
  language  = {de}
}
@article{WollertVedralGrimmetal.2004,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas and Grimm, A. and Holtmann, M.},
  title     = {Bluetooth-Sicherheit : wie viel Pers{\"o}nlichkeit gebe ich preis?},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  volume    = {Bd. 53},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium f{\"u}r Entwicklungen funkbasierter Systeme},
  number    = {Sonderh. M{\"a}rz},
  issn      = {0013-5658},
  pages     = {30 -- 35},
  year      = {2004},
  language  = {de}
}
@article{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth, WLAN and ZigBee f{\"u}r die Automatisierungstechnik},
  series = {Etz : Elektrotechnik \& Automation},
  volume    = {Bd. 125},
  journal   = {Etz : Elektrotechnik \& Automation},
  number    = {H. 6},
  issn      = {0948-7387},
  pages     = {10 -- 18},
  year      = {2004},
  language  = {de}
}
@article{Wollert2004,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth in der Automatisierung : kabelfrei in eine bessere Zukunft},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 53},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 14},
  issn      = {0013-5658},
  pages     = {42 -- 46},
  year      = {2004},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {F{\"u}r viele, viele bunte Smarties : komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  volume    = {30},
  journal   = {Fracht + Materialfluss : FM ; Technik und Praxis der Logistik},
  number    = {H. 6},
  issn      = {1430-9807},
  pages     = {30 -- 32},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Komplexes qualit{\"a}tsorientiertes Logistikmanagement durch Vollautomatisierung},
  series = {Dhf : Intralogistik ; Fachzeitschrift f{\"u}r Intralogistik},
  volume    = {Bd. 44},
  journal   = {Dhf : Intralogistik ; Fachzeitschrift f{\"u}r Intralogistik},
  number    = {H. 1},
  issn      = {0723-7901},
  pages     = {14 -- 16},
  year      = {1998},
  language  = {de}
}
@article{Wollert1998,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Produktionslogistik der Front- und Heckmodule f{\"u}r die Smart-Montage in Hambach},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {48 -- 51},
  year      = {1998},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Mit verwertbarem Aufwand : Portieren von Software auf Windows CE},
  series = {Elektrotechnik f{\"u}r die Automatisierung},
  journal   = {Elektrotechnik f{\"u}r die Automatisierung},
  issn      = {0013-581X},
  pages     = {46 -- 47},
  year      = {1999},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Betriebssysteme im Wettlauf : Elan-Entwicklungsboard mit Win CE und QNX},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 11},
  issn      = {0013-5658},
  pages     = {86 -- 91},
  year      = {1999},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Die Kunst des Weglassens : Windows NT Embedded - Was die neue Version vom Standard-NT unterscheidet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 48},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {116 -- 121},
  year      = {1999},
  language  = {de}
}
@article{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Ethernet in der Automatisierungstechnik ; 1: Herk{\"o}mmliche Feldbusse im Vergleich zu Ethernet},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 49},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 15},
  issn      = {0013-5658},
  pages     = {68 -- 77},
  year      = {2000},
  language  = {de}
}
@article{Wollert2000,
  author    = {Wollert, J{\"o}rg},
  title     = {Ethernet in der Automatisierungstechnik ; 2: Grenzen und M{\"o}glichkeiten des industriellen Ethernet-Einsatzes},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 49},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 21},
  issn      = {0013-5658},
  pages     = {66 -- 75},
  year      = {2000},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 1: Die Technik auf einen Blick},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 17},
  issn      = {0013-5658},
  pages     = {80 -- 84},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 2: Die M{\"o}glichkeiten der Bluetooth-Technik},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 18},
  issn      = {0013-5658},
  pages     = {68 -- 74},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 3: Rund um den Bluetooth-Protokollstack},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 19},
  issn      = {0013-5658},
  pages     = {96 -- 103},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 5: Die Bluetooth-Host-Schnittstelle},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 22},
  issn      = {0013-5658},
  pages     = {60 -- 65},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 6: Die Bluetooth-Host-Software},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 23},
  issn      = {0013-5658},
  pages     = {50 -- 57},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 7: Angepasste Protokolle},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 24},
  issn      = {0013-5658},
  pages     = {66 -- 72},
  year      = {2001},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 8: Anwendungs-Profile},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 25},
  issn      = {0013-5658},
  pages     = {66 -- 73},
  year      = {2001},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 9: Bluetooth-Systementwicklung},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 1},
  issn      = {0013-5658},
  pages     = {58 -- 63},
  year      = {2002},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 10: Alternative Technologien},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 2},
  issn      = {0013-5658},
  pages     = {50 -- 56},
  year      = {2002},
  language  = {de}
}
@article{WollertVedral2002,
  author    = {Wollert, J{\"o}rg and Vedral, Andreas},
  title     = {Einsatz von Open-Source-Software f{\"u}r Bluetooth-Evaluationsprototypen : Anwendungsempfehlungen und Einsatzbeispiele},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 22},
  issn      = {0013-5658},
  pages     = {70 -- 73},
  year      = {2002},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth im Automobil : derzeitiger Stand der Technik - und was danach kommt},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler ; Sonderh. Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {Sonderh. Sept.},
  issn      = {0013-5658},
  pages     = {60 -- 63},
  year      = {2002},
  language  = {de}
}
@article{Wollert2002,
  author    = {Wollert, J{\"o}rg},
  title     = {Vierzig Jahre Software-Desaster : zehn Regeln als R{\"u}stzeug, um die Herausforderung Software-Entwicklung zu meistern},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Bd. 51},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {H. 25},
  issn      = {0013-5658},
  pages     = {110 -- 115},
  year      = {2002},
  language  = {de}
}
@article{Wollert2008,
  author    = {Wollert, J{\"o}rg},
  title     = {IT ins Auto! IP im Ethernet und der USB k{\"o}nnen im Kfz gut genutzt werden},
  series = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  journal   = {Elektronik automotive : Magazin f{\"u}r Entwicklungen in der Kfz-Elektronik und Telematik},
  number    = {H. 9},
  issn      = {1614-0125},
  pages     = {46 -- 51},
  year      = {2008},
  language  = {de}
}
@article{KirchhofKraft2012,
  author    = {Kirchhof, Michael and Kraft, Bodo},
  title     = {Hybrides Vorgehensmodell : Agile und klassische Methoden im Projekt passend kombinieren},
  series = {ProjektMagazin},
  journal   = {ProjektMagazin},
  number    = {11},
  publisher = {Berleb Media},
  address   = {Taufkirchen},
  pages     = {11 S.},
  year      = {2012},
  abstract  = {Agil ist im Trend und immer mehr Unternehmen, die ihre Projekte bisher nach klassischen Prinzipien durchf{\"u}hrten, denken {\"u}ber den Einsatz agiler Methoden nach. Doch selbst wenn die Organisation bereits beide Philosophien unterst{\"u}tzt, gilt f{\"u}r ein Projekt meist die klare Vorgabe: agil oder klassisch. Es gibt aber noch einen anderen Ansatz, mit diesen "unterschiedlichen Welten" umzugehen: Und zwar die beiden Philosophien innerhalb eines Projekts zu kombinieren. Wie dies in der Praxis aussehen und gelingen kann, zeigen Dr. Michael Kirchhof und Prof. Dr. Bodo Kraft in diesem Beitrag.},
  language  = {de}
}
@article{OberlaenderBrommWendeleretal.2015,
  author    = {Oberl{\"a}nder, Jan and Bromm, Alexander and Wendeler, Luisa and Iken, Heiko and Palomar Duran, Marlena and Greeff, Anton and Kirchner, Patrick and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Towards a biosensor to monitor the sterilisation efficiency of aseptic filling machines},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431900},
  pages     = {1299 -- 1305},
  year      = {2015},
  abstract  = {Sterilisation processes are compulsory in medicine, pharmacy, and food industries to prevent infections of consumers and microbiological contaminations of products. Monitoring the sterilisation by conventional microbiological methods is time- and lab-consuming. To overcome this problem, in this work a novel biosensor has been proposed. The sensor enables a fast method to evaluate sterilisation processes. By means of thin-film technology the sensor's transducer structures in form of IDEs (interdigitated electrodes) have been fabricated on a silicon substrate. Physical characterisation of the developed sensor was done by AFM, SEM, and profilometry. Impedance analyses were conducted for the electrical characterisation. As microbiological layer spores of B. atrophaeus have been immobilised on the sensing structure; spores of this type are a well-known sterilisation test organism. Impedance measurements at a fixed frequency over time were performed to monitor the immobilisation process. A sterilisation process according to aseptic filling machines was applied to demonstrate the sensor functionality. After both, immobilisation and sterilisation, a change in impedance could successfully be detected.},
  language  = {en}
}
@article{JildehWagnerSchoeningetal.2015,
  author    = {Jildeh, Zaid B. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Pieper, Martin},
  title     = {Simulating the electromagnetic-thermal treatment of thin aluminium layers for adhesion improvement},
  series = {Physica status solidi (a)},
  volume    = {Vol. 212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431893},
  pages     = {1234 -- 1241},
  year      = {2015},
  abstract  = {A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.},
  language  = {en}
}
@article{SchneiderSchneiderMeinhardtetal.2015,
  author    = {Schneider, Wilhelm and Schneider, Bettina and Meinhardt, Kerstin and Kinder, Stephanie},
  title     = {Die Fallstudie : Ermittlung des k{\"o}rperschaftssteuerlichen Einkommens und des Gewerbeertrags einer Kapitalgesellschaft},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {44},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {3},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {295 -- 298},
  year      = {2015},
  language  = {de}
}
@article{PilasIkenSelmeretal.2015,
  author    = {Pilas, Johanna and Iken, Heiko and Selmer, Thorsten and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Development of a multi-parameter sensor chip for the simultaneous detection of organic compounds in biogas processes},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431894},
  pages     = {1306 -- 1312},
  year      = {2015},
  abstract  = {An enzyme-based multi-parameter biosensor is developed for monitoring the concentration of formate, d-lactate, and l-lactate in biological samples. The sensor is based on the specific dehydrogenation by an oxidized β-nicotinamide adenine dinucleotide (NAD+)-dependent dehydrogenase (formate dehydrogenase, d-lactic dehydrogenase, and l-lactic dehydrogenase, respectively) in combination with a diaphorase from Clostridium kluyveri (EC 1.8.1.4). The enzymes are immobilized on a platinum working electrode by cross-linking with glutaraldehyde (GA). The principle of the determination scheme in case of l-lactate is as follows: l-lactic dehydrogenase (l-LDH) converts l-lactate into pyruvate by reaction with NAD+. In the presence of hexacyanoferrate(III), the resulting reduced β-nicotinamide adenine dinucleotide (NADH) is then regenerated enzymatically by diaphorase. The electrochemical detection is based on the current generated by oxidation of hexacyanoferrate(II) at an applied potential of +0.3 V vs. an Ag/AgCl reference electrode. The biosensor will be electrochemically characterized in terms of linear working range and sensitivity. Additionally, the successful practical application of the sensor is demonstrated in an extract from maize silage.},
  language  = {en}
}
@article{BreuerRaueKirschbaumetal.2015,
  author    = {Breuer, Lars and Raue, Markus and Kirschbaum, M. and Mang, Thomas and Sch{\"o}ning, Michael Josef and Thoelen, R. and Wagner, Torsten},
  title     = {Light-controllable polymeric material based on temperature-sensitive hydrogels with incorporated graphene oxide},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431944},
  pages     = {1368 -- 1374},
  year      = {2015},
  abstract  = {Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel films with incorporated graphene oxide (GO) were developed and tested as light-stimulated actuators. GO dispersions were synthesized via Hummers method and characterized toward their optical properties and photothermal energy conversion. The hydrogels were prepared by means of photopolymerization. In addition, the influence of GO within the hydrogel network on the lower critical solution temperature (LCST) was investigated by differential scanning calorimetry (DSC). The optical absorbance and the response to illumination were determined as a function of GO concentration for thin hydrogel films. A proof of principle for the stimulation with light was performed.},
  language  = {en}
}
@article{KuschRieserKnuppetal.2015,
  author    = {Kusch, Peter and Rieser, Claudia and Knupp, Gerd and Mang, Thomas},
  title     = {Characterization of copolymers of methacrylic acid with poly(ethylene glycol) methyl ether methacrylate macromonomers by analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS)},
  series = {Journal of Analytical and Applied Pyrolysis},
  volume    = {Vol. 113},
  journal   = {Journal of Analytical and Applied Pyrolysis},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0165-2370},
  doi       = {10.1016/j.jaap.2015.03.003},
  pages     = {412 -- 418},
  year      = {2015},
  language  = {de}
}
@article{BenzelUtzerath2013,
  author    = {Benzel, Ute and Utzerath, Meike},
  title     = {Latente Steuern im Zusammenhang mit Beteiligungen an Tochterunternehmen im IFRS-Konzernabschluss},
  series = {Internationale Steuer-Rundschau : ISR ; Zeitschrift f{\"u}r internationales Steuerrecht},
  journal   = {Internationale Steuer-Rundschau : ISR ; Zeitschrift f{\"u}r internationales Steuerrecht},
  number    = {4},
  publisher = {Verlag Dr. Otto Schmidt},
  address   = {K{\"o}ln},
  issn      = {2194-539X},
  pages     = {143 -- 148},
  year      = {2013},
  language  = {de}
}
@article{BenzelLinzbach2010,
  author    = {Benzel, Ute and Linzbach, Meike},
  title     = {Bilanzierung und Offenlegung von Ertragsteuerrisiken - Quo vadis? Unsichere Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB},
  series = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  journal   = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung},
  number    = {11},
  issn      = {1862-5533},
  pages     = {475 -- 523},
  year      = {2010},
  abstract  = {In den letzten drei bis vier Jahren unterlag der Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen im IFRS- und US-GAAP-Abschluss einem stetigen Wandel. Sowohl nach US-GAAP als auch nach IFRS nehmen die Anforderungen an die Bilanzierung und Offenlegung best{\"a}ndig zu. Schon allein dies zeigt die Bedeutung, die dem Themenbereich der Steuerrisiken beigemessen wird. Aber nicht nur im Rahmen der Berichterstattung im Jahresabschluss stehen Steuerrisiken oben auf der Agenda, auch der amerikanische Internal Revenue Service (IRS) verfolgt das Thema sehr konsequent und plant, bestimmte Unternehmen zu Angaben von Steuerrisiken im Rahmen der Steuererkl{\"a}rungen zu verpflichten. Der Aufsatz befasst sich mit den neueren Entwicklungen im Bereich der Bilanzierung und Offenlegung von unsicheren Steuerpositionen in der Rechnungslegung nach IFRS, US-GAAP und HGB und der Offenlegung von Steuerrisiken im Rahmen der Steuererkl{\"a}rung.},
  language  = {de}
}
@article{BolikLinzbach2010,
  author    = {Bolik, Andreas and Linzbach, Meike},
  title     = {Verluste und Zinsschranke in der Bilanzierung latenter Steuern},
  series = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  volume    = {48},
  journal   = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  number    = {31},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0012-1347},
  pages     = {1587 -- 1590},
  year      = {2010},
  abstract  = {Latente Steuern stellen eine Schnittstelle zwischen handelsrechtlicher Rechnungslegung und Steuerrecht dar. Das Verh{\"a}ltnis von Handels- und Steuerrecht ist dabei keinesfalls stetig; vielmehr fordert die Dynamik des deutschen Steuerrechts in vielen Bereichen regelm{\"a}ßige Anpassungen in der Bilanzierung in Handels- und Steuerbilanz. Dies gilt insbesondere f{\"u}r die Bilanzierung latenter Steuern im handelsrechtlichen Jahresabschluss, welche durch das BilMoG deutlich an Bedeutung gewonnen hat. Neben latenten Steuern auf tempor{\"a}re Differenzen ist es nunmehr erforderlich, Verlustvortr{\"a}ge und die Folgen der Zinsschranke bei der Berechnung latenter Steuern zu ber{\"u}cksichtigen. Der nachfolgende Beitrag geht auf die Ber{\"u}cksichtigung von Verlust- und Zinsvortr{\"a}gen und die Ber{\"u}cksichtigungsf{\"a}higkeit von EBITDA-Vortr{\"a}gen bei der Berechnung latenter Steuern ein und beleuchtet dabei insbesondere auch praktische Fragestellungen.},
  language  = {de}
}
@article{BenzelLinzbach2009,
  author    = {Benzel, Ute and Linzbach, Meike},
  title     = {Neue Vorschriften f{\"u}r die Bilanzierung von Steuerrisikor{\"u}ckstellungen : der Exposure Draft ED/2009/2 des IASB},
  series = {KoR - Zeitschrift f{\"u}r kapitalmarktorientierte Rechnungslegung},
  volume    = {Jg. 9},
  journal   = {KoR - Zeitschrift f{\"u}r kapitalmarktorientierte Rechnungslegung},
  number    = {H. 7/8},
  issn      = {1437-8981 ; 1617-8084},
  pages     = {400 -- 408},
  year      = {2009},
  language  = {de}
}
@article{BenzelLinzbach2009,
  author    = {Benzel, Ute and Linzbach, Meike},
  title     = {Auswirkungen des Forderungsverzichtes - Steuerliche Belastung und Beeinflussung der Steuerquote},
  series = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  volume    = {Jg. 47},
  journal   = {Deutsches Steuerrecht : DStR ; Wochenschrift \& umfassende Datenbank f{\"u}r Steuerberater ; Steuerrecht, Wirtschaftsrecht, Betriebswirtschaft, Beruf ; Organ der Bundessteuerberaterkammer},
  number    = {H. 31},
  publisher = {Beck},
  address   = {M{\"u}nchen},
  issn      = {0012-1347 ; 0949-7676},
  pages     = {1599 -- 1602},
  year      = {2009},
  language  = {de}
}
@article{LeidingerNoistenWollert2012,
  author    = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg},
  title     = {Realtime automation networks in moVing industrial environments},
  series = {Journal of systemics, cybernetics and informatics},
  volume    = {Vol. 10},
  journal   = {Journal of systemics, cybernetics and informatics},
  number    = {Iss. 2},
  publisher = {IIIC},
  address   = {Orlando},
  issn      = {1690-4532},
  pages     = {52 -- 56},
  year      = {2012},
  abstract  = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.},
  language  = {en}
}
@article{WollertBuda2009,
  author    = {Wollert, J{\"o}rg and Buda, Aurel},
  title     = {Funkl{\"o}sungen im parallelen Betrieb},
  series = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management},
  journal   = {Intelligenter produzieren : die Wissensplattform f{\"u}r das technische Management},
  number    = {H. 4},
  publisher = {VDMA-Verl.},
  address   = {Frankfurt, M.},
  issn      = {1869-2745},
  pages     = {6 -- 8},
  year      = {2009},
  language  = {de}
}
@article{Wollert1999,
  author    = {Wollert, J{\"o}rg},
  title     = {Schlaue Produktion von smarten Autos : hinter der Smart-Produktion steckt ein innovatives Logistikkonzept},
  series = {Technica},
  volume    = {Bd. 48},
  journal   = {Technica},
  number    = {H. 4},
  issn      = {0040-866X},
  pages     = {20 -- 23},
  year      = {1999},
  language  = {de}
}
@article{HeptnerWollert2005,
  author    = {Heptner, K. and Wollert, J{\"o}rg},
  title     = {FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik'},
  series = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  volume    = {19},
  journal   = {Logistik f{\"u}r Unternehmen : das Fachmagazin der internen und externen Logistik},
  issn      = {0930-7834},
  pages     = {58 -- 59},
  year      = {2005},
  language  = {de}
}
@article{HuberStreblowMuelleretal.2014,
  author    = {Huber, M. and Streblow, R. and M{\"u}ller, D. and Lange, S. and Joneleit, R. and Sefker, T. and Rau, Sebastian and Wollert, J{\"o}rg},
  title     = {Funksignal{\"u}bertragung in Luftleitungen},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 65},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 7/8},
  issn      = {1436-5103},
  pages     = {36 -- 40},
  year      = {2014},
  language  = {de}
}
@article{Wollert1995,
  author    = {Wollert, J{\"o}rg},
  title     = {Zeitsprung : Grundlagen und Markt{\"u}bersicht zu Echtzeit-Betriebssystemen},
  series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 6},
  issn      = {0170-1827},
  pages     = {48 -- 59},
  year      = {1995},
  language  = {de}
}
@article{WollertFiedlerStockmann1994,
  author    = {Wollert, J{\"o}rg and Fiedler, J. and Stockmann, T.},
  title     = {Automatisieren mit dem PC : was der Personal Computer kann und wo er passen muss},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {Nr. 6},
  issn      = {0013-5658},
  pages     = {76 -- 82},
  year      = {1994},
  language  = {de}
}
@article{Wollert1995,
  author    = {Wollert, J{\"o}rg},
  title     = {Euros - 166 - Echtzeitentwicklungskit f{\"u}r den 80C166},
  series = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  journal   = {ELRAD : Magazin f{\"u}r Elektronik und technische Rechneranwendungen},
  number    = {H. 8},
  issn      = {0170-1827},
  pages     = {32 -- 34},
  year      = {1995},
  language  = {de}
}
@article{Wollert2001,
  author    = {Wollert, J{\"o}rg},
  title     = {Bluetooth aktuell - Technik und Anwendungen ; 4: Der Bluetooth Protokoll-Stack},
  series = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  volume    = {Jg. 50},
  journal   = {Elektronik : Fachmedium f{\"u}r industrielle Anwender und Entwickler},
  number    = {Nr. 20},
  issn      = {0013-5658},
  pages     = {76 -- 81},
  year      = {2001},
  language  = {de}
}
@article{SchneiderSchneiderMeinhardtetal.2015,
  author    = {Schneider, Wilhelm and Schneider, Bettina and Meinhardt, Kerstin and Kinder, Stephanie},
  title     = {Allgemeines Steuerrecht},
  series = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  volume    = {44},
  journal   = {Das Wirtschaftsstudium : wisu ; Zeitschrift f{\"u}r Ausbildung, Examen, Berufseinstieg und Fortbildung},
  number    = {8-9},
  publisher = {Lange},
  address   = {D{\"u}sseldorf},
  issn      = {0340-3084},
  pages     = {903 -- 910},
  year      = {2015},
  language  = {de}
}
@article{SchiffelsSelmer2015,
  author    = {Schiffels, Johannes and Selmer, Thorsten},
  title     = {A flexible toolbox to study protein-assisted metalloenzyme assembly in vitro},
  series = {Biotechnology and Bioengineering},
  volume    = {112},
  journal   = {Biotechnology and Bioengineering},
  number    = {11},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1097-0290},
  doi       = {10.1002/bit.25658},
  pages     = {2360 -- 2372},
  year      = {2015},
  language  = {en}
}
@article{DantismTakenagaWagneretal.2015,
  author    = {Dantism, S. and Takenaga, S. and Wagner, P. and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {Light-addressable Potentiometric Sensor (LAPS) Combined with Multi-chamber Structures to Investigate the Metabolic Activity of Cells},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.647},
  pages     = {384 -- 387},
  year      = {2015},
  abstract  = {LAPS are field-effect-based potentiometric sensors which are able to monitor analyte concentrations in a spatially resolved manner. Hence, a LAPS sensor system is a powerful device to record chemical imaging of the concentration of chemical species in an aqueous solution, chemical reactions, or the growth of cell colonies on the sensor surface, to record chemical images. In this work, multi-chamber 3D-printed structures made out of polymer (PP-ABS) were combined with LAPS chips to analyse differentially and simultaneously the metabolic activity of Escherichia coli K12 and Chinese hamster ovary (CHO) cells, and the responds of those cells to the addition of glucose solution.},
  language  = {en}
}
@article{PilasMarianoKeusgenetal.2015,
  author    = {Pilas, Johanna and Mariano, K. and Keusgen, M. and Selmer, Thorsten and Sch{\"o}ning, Michael Josef},
  title     = {Optimization of an Enzyme-based Multi-parameter Biosensor for Monitoring Biogas Processes},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.702},
  pages     = {532 -- 535},
  year      = {2015},
  language  = {en}
}
@article{MottaghyPechnigTaugsetal.2010,
  author    = {Mottaghy, Darius and Pechnig, Renate and Taugs, Renate and Kr{\"o}ger, Jens and Thomsen, Claudia and Hesse, Fabian and Liebsch-Doerschner, Thomas},
  title     = {Erstellung eines geothermischen Modells f{\"u}r Teile Hamburgs und anliegende Gebiete},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {61},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {12},
  publisher = {WVGW Wirtschafts- u. Verl.Ges. Gas und Wasser},
  address   = {Bonn},
  issn      = {1611-1478},
  pages     = {52 -- 59},
  year      = {2010},
  language  = {de}
}
@article{BergAngererMartinellietal.2013,
  author    = {Berg, Milena and Angerer, Anita and Martinelli, Walter and Hammer, Stephan and Mottaghy, Darius},
  title     = {Erkundung des geothermischen Potenzials eines ehemaligen Untertagebergbaus},
  series = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  volume    = {64},
  journal   = {BBR - Fachmagazin f{\"u}r Brunnen- und Leitungsbau},
  number    = {6},
  pages     = {46 -- 52},
  year      = {2013},
  language  = {de}
}
@article{MottaghyPechnigVogt2011,
  author    = {Mottaghy, Darius and Pechnig, Renate and Vogt, Christian},
  title     = {The geothermal project Den Haag: 3D numerical models for temperature prediction and reservoir simulation},
  series = {Geothermics},
  volume    = {40},
  journal   = {Geothermics},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0375-6505},
  doi       = {10.1016/j.geothermics.2011.07.001},
  pages     = {199 -- 210},
  year      = {2011},
  abstract  = {The proposed Den Haag Zuidwest district heating system of the city of The Hague consists of a deep doublet in a Jurassic sandstone layer that is designed for a production temperature of 75 °C and a reinjection temperature of 40 °C at a flow rate of 150 m3 h-1. The prediction of reservoir temperature and production behavior is crucial for success of the proposed geothermal doublet. This work presents the results of a study of the important geothermal and geohydrological issues for the doublet design. In the first phase of the study, the influences of the three-dimensional (3D) structures of anticlines and synclines on the temperature field were examined. A comprehensive petrophysical investigation was performed to build a large scale 3D-model of the reservoir. Several bottomhole temperatures (BHTs), as well as petrophysical logs were used to calibrate the model using thermal conductivity measurements on 50 samples from boreholes in different lithological units in the study area. Profiles and cross sections extracted from the calculated temperature field were used to study the temperature in the surrounding areas of the planned doublet. In the second phase of the project, a detailed 3D numerical reservoir model was set up, with the aim of predicting the evolution of the producer and injector temperatures, and the extent of the cooled area around the injector. The temperature model from the first phase provided the boundary conditions for the reservoir model. Hydraulic parameters for the target horizons, such as porosity and permeability, were taken from data available from the nearby exploration wells. The simulation results are encouraging as no significant thermal breakthrough is predicted. For the originally planned location of the producer, the extracted water temperature is predicted to be around 79 °C, with an almost negligible cooling in the first 50 years of production. When the producer is located shallower parts of the reservoir, the yield water temperatures is lower, starting at ≈76 °C and decreasing to ≈74 °C after 50 years of operation. This comparatively larger decrease in temperature with time is caused by the structural feature of the reservoir, namely a higher dip causes the cooler water to easily move downward. In view of the poor reservoir data, the reservoir simulation model is constructed to allow iterative updates using data assimilation during planned drilling, testing, and production phases. Measurements during an 8 h pumping test carried out in late 2010 suggest that a flow rate of 150 m3 h-1 is achievable. Fluid temperatures of 76.5 °C were measured, which is very close to the predicted value.},
  language  = {en}
}
@article{MottaghyDijkshoorn2012,
  author    = {Mottaghy, Darius and Dijkshoorn, Lydia},
  title     = {Implementing an effective finite difference formulation for borehole heat exchangers into a heat and mass transport code},
  series = {Renewable Energy},
  volume    = {45},
  journal   = {Renewable Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0960-1481},
  doi       = {10.1016/j.renene.2012.02.013},
  pages     = {59 -- 71},
  year      = {2012},
  abstract  = {We present an effective finite difference formulation for implementing and modeling multiple borehole heat exchangers (BHE) in the general 3-D coupled heat and flow transport code SHEMAT. The BHE with arbitrary length can be either coaxial or double U-shaped. It is particularly suitable for modeling deep BHEs which contain varying pipe diameters and materials. Usually, in numerical simulations, a fine discretization of the BHE assemblage is required, due to the large geometric aspect ratios involved. This yields large models and long simulation times. The approach avoids this problem by considering heat transport between fluid and the soil through pipes and grout via thermal resistances. Therefore, the simulation time can be significantly reduced. The coupling with SHEMAT is realized by introducing an effective heat generation. Due to this connection, it is possible to consider heterogeneous geological models, as well as the influence of groundwater flow. This is particularly interesting when studying the long term behavior of a single BHE or a BHE field. Heating and cooling loads can enter the model with an arbitrary interval, e.g. from hourly to monthly values. When dealing with large BHE fields, computing times can be further significantly reduced by focusing on the temperature field around the BHEs, without explicitly modeling inlet and outlet temperatures. This allows to determine the possible migration of cold and warm plumes due to groundwater flow, which is of particular importance in urban areas with a high BHE installation density. The model is validated against the existing BHE modeling codes EWS and EED. A comparison with monitoring data from a deep BHE in Switzerland shows a good agreement. Synthetic examples demonstrate the field of application of this model.},
  language  = {en}
}
@article{KuertenMottaghyZiegler2013,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {W{\"a}rme{\"u}bergangswiderstand bei fl{\"a}chigen thermo-aktiven Bauteilen am Beispiel thermo-aktiver Abdichtungselemente},
  series = {Bautechnik},
  volume    = {90},
  journal   = {Bautechnik},
  number    = {7},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-0999},
  doi       = {10.1002/bate.201300035},
  pages     = {387 -- 394},
  year      = {2013},
  language  = {de}
}
@article{MottaghySchwambornRath2013,
  author    = {Mottaghy, Darius and Schwamborn, G. and Rath, V.},
  title     = {Past climate changes and permafrost depth at the Lake El'gygytgyn site: implications from data and thermal modeling},
  series = {Climate of the Past},
  volume    = {9},
  journal   = {Climate of the Past},
  number    = {1},
  publisher = {Copernicus},
  address   = {Katlenburg-Lindau},
  issn      = {1814-9332},
  doi       = {10.5194/cp-9-119-2013},
  pages     = {119 -- 133},
  year      = {2013},
  language  = {en}
}
@article{VogtIwanowskiStrahserMarquartetal.2013,
  author    = {Vogt, Christian and Iwanowski-Strahser, Katha and Marquart, Gabriele and Arnold, Juliane and Mottaghy, Darius and Pechnig, Renate and Gnjezda, Daniel and Clauser, Christoph},
  title     = {Modeling contribution to risk assessment of thermal production power for geothermal reservoirs},
  series = {Renewable Energy},
  volume    = {53},
  journal   = {Renewable Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0960-1481},
  doi       = {10.1016/j.renene.2012.11.026},
  pages     = {230 -- 241},
  year      = {2013},
  language  = {en}
}
@article{KuertenMottaghyZiegler2014,
  author    = {K{\"u}rten, Sylvia and Mottaghy, Darius and Ziegler, Martin},
  title     = {Planung, Auslegung und Dimensionierung von thermo-aktiven Bauteilen am Beispiel thermo-aktiver Abdichtungselemente},
  series = {Geothermie, Bohr- und Brunnentechnik},
  journal   = {Geothermie, Bohr- und Brunnentechnik},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  pages     = {18 -- 20},
  year      = {2014},
  language  = {de}
}
@article{MiyamotoBingWagneretal.2015,
  author    = {Miyamoto, Ko-ichiro and Bing, Yu and Wagner, Torsten and Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {Visualization of Defects on a Cultured Cell Layer by Utilizing Chemical Imaging Sensor},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.806},
  pages     = {936 -- 939},
  year      = {2015},
  abstract  = {The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) inthe sample. In this study, a novel wound-healing assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the defect of a cell layer brought into proximity of the sensing surface.A reduced impedance inside the defect, which was artificially formed ina cell layer, was successfully visualized in a photocurrent image.},
  language  = {en}
}
@article{MottaghySchellschmidtPopovetal.2005,
  author    = {Mottaghy, Darius and Schellschmidt, R. and Popov, Y. A. and Clauser, C. and Kukkonen, I. T. and Nover, G. and Milanovsky, S. and Romushkevich, R. A.},
  title     = {New heat flow data from the immediate vicinity of the Kola super-deep borehole: Vertical variation in heat flow density confirmed and attributed to advection},
  series = {Tectonophysics},
  volume    = {401},
  journal   = {Tectonophysics},
  number    = {1-2},
  issn      = {1879-3266},
  doi       = {10.1016/j.tecto.2005.03.005},
  pages     = {119 -- 142},
  year      = {2005},
  language  = {en}
}
@article{MottaghyRath2006,
  author    = {Mottaghy, Darius and Rath, Volker},
  title     = {Latent heat effects in subsurface heat transport modelling and their impact on palaeotemperature reconstructions},
  series = {Geophysical Journal International},
  volume    = {164},
  journal   = {Geophysical Journal International},
  number    = {1},
  issn      = {1365-246X},
  doi       = {10.1111/j.1365-246X.2005.02843.x},
  pages     = {236 -- 245},
  year      = {2006},
  language  = {en}
}