@article{ItabashiKosakaMiyamotoetal.2013,
  author    = {Itabashi, Akinori and Kosaka, Naoki and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef},
  title     = {High-speed chemical imaging system based on front-side-illuminated LAPS},
  series = {Sensors and actuators B: Chemical},
  volume    = {182},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077},
  doi       = {10.1016/j.snb.2013.03.016},
  pages     = {315 -- 321},
  year      = {2013},
  abstract  = {The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the spatial distribution of specific ions on the sensing surface. The conventional chemical imaging system based on the light-addressable potentiometric sensor (LAPS), however, required a long time to obtain a chemical image, due to the slow mechanical scan of a single light beam. For high-speed imaging, a plurality of light beams modulated at different frequencies can be employed to measure the ion concentrations simultaneously at different locations on the sensor plate by frequency division multiplex (FDM). However, the conventional measurement geometry of back-side illumination limited the bandwidth of the modulation frequency required for FDM measurement, because of the low-pass filtering characteristics of carrier diffusion in the Si substrate. In this study, a high-speed chemical imaging system based on front-side-illuminated LAPS was developed, which achieved high-speed spatiotemporal recording of pH change at a rate of 70 frames per second.},
  language  = {en}
}
@article{FischerDoerenJanke1981,
  author    = {Fischer, W. A. and D{\"o}ren, Horst-Peter and Janke, Dieter},
  title     = {Aluminium nitride probes for application in iron melts},
  series = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen. 52 (1981), H. 3},
  journal   = {Archiv f{\"u}r das Eisenh{\"u}ttenwesen. 52 (1981), H. 3},
  issn      = {0003-8962},
  pages     = {91 -- 98},
  year      = {1981},
  language  = {en}
}
@article{HaissigDoerenWilmes1981,
  author    = {Haissig, Manfred and D{\"o}ren, Horst-Peter and Wilmes, S.},
  title     = {Stand der Entwicklung des Horizontal-Stranggießens von Edelstahl bei der B{\"o}hler AG},
  series = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  journal   = {Stahl und Eisen. Zeitschrift f{\"u}r die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenh{\"u}ttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6},
  issn      = {0340-4803},
  pages     = {383 -- 390},
  year      = {1981},
  language  = {de}
}
@inproceedings{DoerenWernicke1983,
  author    = {D{\"o}ren, Horst-Peter and Wernicke, K.},
  title     = {Auftragen von verschleißfesten stranggegossenen Hartlegierungen auf Kobaltbasis durch das WIG- und Gasschweißen},
  series = {Schweißen und Schneiden '83 = Welding and Cutting '83. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 83},
  booktitle = {Schweißen und Schneiden '83 = Welding and Cutting '83. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 83},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik},
  address   = {D{\"u}sseldorf},
  issn      = {3-87155-388-3},
  pages     = {109 -- 113},
  year      = {1983},
  language  = {de}
}
@inproceedings{DoerenLohrmannWernicke1986,
  author    = {D{\"o}ren, Horst-Peter and Lohrmann, G. R. and Wernicke, K.},
  title     = {Plasma-Auftragschweißen mit Metallpulvern und Einsatzm{\"o}glichkeiten in der Kerntechnik},
  series = {Schweissen in der Kerntechnik : Vortr{\"a}ge : internationales Kolloquium. 5 = Welding in nuclear engineering: international conference. 5 = Le soudage dans la technique nucleaire: colloque international. 5 : N{\"u}rnberg, 26.11.86-28.11.86. DVS-Berichte. Bd. 106},
  booktitle = {Schweissen in der Kerntechnik : Vortr{\"a}ge : internationales Kolloquium. 5 = Welding in nuclear engineering: international conference. 5 = Le soudage dans la technique nucleaire: colloque international. 5 : N{\"u}rnberg, 26.11.86-28.11.86. DVS-Berichte. Bd. 106},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-411-1},
  pages     = {129 -- 133},
  year      = {1986},
  language  = {de}
}
@article{DoerenWernicke1987,
  author    = {D{\"o}ren, Horst-Peter and Wernicke, K.},
  title     = {Slijtvaste lagen door oplassen met plasmapoeder},
  series = {Metaal en Kunststof: MK. Universeel weekblad voor fabriek en werkplaats. 24 (1987), Nr. 23},
  journal   = {Metaal en Kunststof: MK. Universeel weekblad voor fabriek en werkplaats. 24 (1987), Nr. 23},
  issn      = {0026-0460},
  pages     = {76 -- 79},
  year      = {1987},
  language  = {nl}
}
@incollection{Doeren1987,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Nichtrostende St{\"a}hle},
  series = {Jahrbuch Schweißtechnik. 1988},
  booktitle = {Jahrbuch Schweißtechnik. 1988},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)},
  address   = {D{\"u}sseldorf},
  isbn      = {0935-0292},
  pages     = {188 -- 203},
  year      = {1987},
  language  = {de}
}
@article{Doeren1987,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Pulver-Auftragschweissen / Hoher Automatisierungsgrad des Plasmaverfahrens. Harte Panzerung aus dem Argon-Strahl.},
  series = {Handelsblatt. Nr. 212 vom 4.11.1987},
  journal   = {Handelsblatt. Nr. 212 vom 4.11.1987},
  pages     = {b15},
  year      = {1987},
  language  = {de}
}
@incollection{Doeren1990,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Das Schweißen von Austenit-Ferrit-Verbindungen},
  series = {Jahrbuch Schweißtechnik. 1991},
  booktitle = {Jahrbuch Schweißtechnik. 1991},
  publisher = {DVS-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-725-0},
  pages     = {57 -- 63},
  year      = {1990},
  language  = {de}
}
@inproceedings{DoerenMolitorErtl1996,
  author    = {D{\"o}ren, Horst-Peter and Molitor, M. and Ertl, Karl-Heinz},
  title     = {Problematik der H{\"a}rtemessung an pulverflammgespritzten Verschleißschutzschichten mit Hilfe mobiler, dynamischer H{\"a}rtepr{\"u}fverfahren},
  series = {Thermische Spritzkonferenz : TS 96 ; Vortr{\"a}ge und Posterbeitr{\"a}ge. Essen 6. bis 8. M{\"a}rz 1996. DVS-Berichte. Bd. 175},
  booktitle = {Thermische Spritzkonferenz : TS 96 ; Vortr{\"a}ge und Posterbeitr{\"a}ge. Essen 6. bis 8. M{\"a}rz 1996. DVS-Berichte. Bd. 175},
  editor    = {Lugscheider, Erich},
  publisher = {DVS-Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-480-4},
  pages     = {249 -- 254},
  year      = {1996},
  language  = {de}
}
@book{MuellerStoecker2011,
  author    = {M{\"u}ller, Thomas and St{\"o}cker, Ernst E.},
  title     = {Die Organschaft : K{\"o}rperschaftssteuerrecht, Gewerbesteuerrecht, Umsatzsteuerrecht, Grunderwerbsteuerrecht},
  editor    = {Lieber, Bettina},
  edition   = {8. Aufl.},
  publisher = {NWB},
  address   = {Herne},
  isbn      = {978-3-482-44608-5},
  pages     = {518 S. : graph. Darst.},
  year      = {2011},
  language  = {de}
}
@book{KleinMuellerLieber2012,
  author    = {Klein, Hartmut Heinz and M{\"u}ller, Thomas and Lieber, Bettina},
  title     = {{\"A}nderung der Unternehmensform : Handbuch zum Umwandlungs- und Umwandlungssteuerrecht},
  edition   = {9. Aufl.},
  publisher = {Verl. Neue Wirtschafts-Briefe},
  address   = {Herne},
  isbn      = {978-3-482-42259-1},
  pages     = {XL, 585 S. : graph. Darst.},
  year      = {2012},
  language  = {de}
}
@book{Doeren2004,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 6. Aufl.},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-786-2},
  pages     = {392 S.},
  year      = {2004},
  language  = {de}
}
@book{Doeren2007,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {F{\"u}getechnik, Schweißtechnik / Horst-Peter D{\"o}ren (Hrsg.).- 7., aktualis. Aufl.},
  publisher = {DVS Verl.},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-87155-907-5},
  pages     = {392 S.},
  year      = {2007},
  language  = {de}
}
@incollection{ClassenDoerenCodanietal.2000,
  author    = {Claßen, R. and D{\"o}ren, Horst-Peter and Codani, L. and Watermeyer, Klaus},
  title     = {Begleitende Untersuchungen beim L{\"o}ten mit vor{\"u}bergehend fl{\"u}ssiger Phase (TL PB) einschließlich Aktivkomponente an Verbindungen verschiedener Kupfer- und Kohlenstoffwerkstoffe (CFC).},
  series = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.},
  booktitle = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.},
  publisher = {Werkstoff-Informationsgesellschaft},
  address   = {Frankfurt},
  pages     = {97 -- 104},
  year      = {2000},
  language  = {de}
}
@incollection{AydinDoerenKuepper1996,
  author    = {Aydin, I. and D{\"o}ren, Horst-Peter and K{\"u}pper, H.},
  title     = {Plasma-Auftragschweißen mit Wolframschmelzkarbid-haltigen Metallpulvern und ihre Einsatzgebiete},
  series = {Thermische Spritzkonferenz = Thermal Spraying Conference. Erich Lugscheider [Hrsg.] DVS-Berichte 175},
  booktitle = {Thermische Spritzkonferenz = Thermal Spraying Conference. Erich Lugscheider [Hrsg.] DVS-Berichte 175},
  publisher = {DVS-Verlag},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-480-4},
  pages     = {137 -- 142},
  year      = {1996},
  language  = {de}
}
@incollection{DoerenPlaschkaPohl1987,
  author    = {D{\"o}ren, Horst-Peter and Plaschka, K. and Pohl, M.},
  title     = {Die Untersuchung von Schutzgasschweißdr{\"a}hten mit Hilfe des Rasterelektronenmikroskops},
  series = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18},
  booktitle = {Fortschritte in der Metallographie. Berichte der 7. Internationalen Metallographie-Tagung Leoben 15. bis 17. Oktober 1986. Sonderb{\"a}nde der Praktischen Metallographie. 18},
  publisher = {Riederer},
  address   = {Stuttgart},
  issn      = {0343-3579},
  pages     = {333 -- 345},
  year      = {1987},
  language  = {de}
}
@incollection{DoerenWernicke1985,
  author    = {D{\"o}ren, Horst-Peter and Wernicke, K.},
  title     = {Einfluß der Schweißparameter beim Plasmaauftragschweißen mit Pulvern},
  series = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100},
  booktitle = {Schweißen und Schneiden '85 = Welding and Cutting '85. Vortr{\"a}ge der Großen Schweißtechnischen Tagung in Essen vom 11. bis 13. September 1985. Veranst.: Deutscher Verband f{\"u}r Schweißtechnik (DVS). DVS-Berichte. 100},
  publisher = {Dt. Verl. f{\"u}r Schweißtechnik (DVS)},
  address   = {D{\"u}sseldorf},
  isbn      = {3-87155-405-7},
  pages     = {72 -- 76},
  year      = {1985},
  language  = {de}
}
@book{Doeren1977,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {Anwendung von AlN- bzw. AlN-Al2O3-Mischungen als Festelektrolyt in Eisenschmelzen bei 1640° C},
  address   = {Aachen},
  pages     = {52 S., 33 Bl. : Ill.},
  year      = {1977},
  language  = {de}
}
@book{Mueller2013,
  author    = {M{\"u}ller, Thomas},
  title     = {K{\"o}rperschaftsteuergesetz / Unter Mitarb. von ... Thomas M{\"u}ller ...},
  editor    = {M{\"o}ssner, Manfred},
  publisher = {NWB Verl.},
  address   = {Herne},
  isbn      = {978-3-482-64311-8},
  pages     = {XXIV, 2048 S.},
  year      = {2013},
  language  = {de}
}
@inproceedings{Engels2013,
  author    = {Engels, Elmar},
  title     = {A field bus library for MATLAB based on open core engineering},
  series = {Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.},
  booktitle = {Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.},
  isbn      = {978-3-90275-907-8},
  year      = {2013},
  language  = {en}
}
@book{Doeren2012,
  author    = {D{\"o}ren, Horst-Peter},
  title     = {F{\"u}getechnik, Schweißtechnik. Horst-Peter D{\"o}ren (Hrsg.).- 8., aktualis. und erw. Aufl.},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-87155-999-0},
  pages     = {411 S.: Ill., graph. Darst.},
  year      = {2012},
  language  = {de}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {{\"A}nderungen zur Haftung und Verg{\"u}tung im Vereins- und Stiftungsrecht},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {693 -- 699},
  year      = {2013},
  language  = {de}
}
@article{Frings2013,
  author    = {Frings, Michael},
  title     = {Begrenzung von vertraglichen H{\"o}chstfristen f{\"u}r Zahlungen und Abnahmen},
  series = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  journal   = {Neue Wirtschaftsbriefe NWB Steuer- und Wirtschaftsrecht},
  publisher = {NWB Verlag},
  address   = {Herne},
  issn      = {0028-3460},
  pages     = {49 -- 56},
  year      = {2013},
  language  = {de}
}
@inproceedings{ReisgenSchleserHarmsetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander},
  title     = {Konduktiv unterst{\"u}tztes R{\"u}hrreibschweißen an Stahl- und Aluminiumwerkstoffen},
  series = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  booktitle = {DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des R{\"u}hrreibschweißens in Fertigungsprozessketten" ; Vortr{\"a}ge der Veranstaltung in N{\"u}rnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)},
  publisher = {DVS Media},
  address   = {D{\"u}sseldorf},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Große Schweißtechnische Tagung <2010, N{\"u}rnberg>},
  isbn      = {978-3-87155-592-3},
  pages     = {394 -- 398},
  year      = {2010},
  language  = {de}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@incollection{ReisgenSchleserStieglitz2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja},
  title     = {Kleben in anspruchsvollen Anwendungsbereichen},
  series = {Jahrbuch Schweißtechnik 2011},
  booktitle = {Jahrbuch Schweißtechnik 2011},
  publisher = {DVS},
  address   = {D{\"u}sseldorf},
  isbn      = {0935-0292},
  pages     = {226 -- 235},
  year      = {2010},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Jerabek, Jakub and Keil, Allessandra},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  booktitle = {Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ; 75)},
  editor    = {Brameshuber, Wolfgang},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference of Textile Reinforced Concrete <2, 2010, Aachen>},
  isbn      = {978-2-35158-106-3},
  pages     = {153 -- 162},
  year      = {2010},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@article{HarmsReisgenSchleseretal.2010,
  author    = {Harms, Alexander and Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Thiele, Regina},
  title     = {Herausforderungen an die F{\"u}getechnik: Leichtbau und Kosteneffizienz beim Elektrofahrzeug},
  series = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)},
  journal   = {Elektromobilit{\"a}t made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westf{\"a}lischen Technischen Hochschule Aachen ; Ausg. 2010, 2)},
  issn      = {0179-079X},
  pages     = {58 -- 60},
  year      = {2010},
  language  = {de}
}
@inproceedings{ReisgenSchleserMokrovetal.2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam and Schmidt, Andre and Rossiter, Eduardo},
  title     = {Integrative Berechnung von Verzug und Eigenspannungen auf Basis realer Schweißparameter},
  series = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar},
  booktitle = {Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar},
  editor    = {Hildebrand, J{\"o}rg},
  publisher = {Univ.-Verl.},
  address   = {Weimar},
  isbn      = {978-3-86068-401-6},
  pages     = {32 -- 41},
  year      = {2009},
  language  = {de}
}
@misc{KeglerNaujokat2013,
  author    = {Kegler, Karl R. and Naujokat, Anke},
  title     = {Grenzwertig. (archimaera. 2013, H. 5) / Hrsg. des Heftes: Karl R. Kegler, Anke Naujokat},
  publisher = {HBZ},
  address   = {K{\"o}ln},
  isbn      = {1865-7001},
  pages     = {199 S. : zahlr. Ill.},
  year      = {2013},
  language  = {de}
}
@inproceedings{Naujokat2012,
  author    = {Naujokat, Anke},
  title     = {Leon Battista Alberti and the consonance of old and new},
  series = {Proceedings of the 2nd International conference of the European Architectural History Network, Brussels 31 May - 2 June 2012},
  booktitle = {Proceedings of the 2nd International conference of the European Architectural History Network, Brussels 31 May - 2 June 2012},
  editor    = {Heynen, Hilde and Gosseye, Janina},
  publisher = {KVAB},
  address   = {Br{\"u}ssel},
  organization    = {European Architectural History Network},
  isbn      = {978-90-6569-102-6},
  pages     = {182 -- 184},
  year      = {2012},
  language  = {de}
}
@incollection{Naujokat2013,
  author    = {Naujokat, Anke},
  title     = {Schichtung, {\"U}berblendung, Collage. Formen und Bedeutungen architektonischer Simultaneit{\"a}t},
  series = {Simultaneit{\"a}t : Modelle der Gleichzeitigkeit in den Wissenschaften und K{\"u}nsten},
  booktitle = {Simultaneit{\"a}t : Modelle der Gleichzeitigkeit in den Wissenschaften und K{\"u}nsten},
  publisher = {transcript-Verlag},
  address   = {Bielefeld},
  isbn      = {978-3-8376-2261-4},
  pages     = {171 -- 190},
  year      = {2013},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2010,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel},
  title     = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton},
  series = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)},
  booktitle = {30. Assistentenseminar F{\"u}ge- und Schweißtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {Assistentenseminar F{\"u}ge- und Schweißtechnik <30, 2009, Warberg> ; Institut f{\"u}r Schweiß- und F{\"u}getechnik <Aachen>},
  isbn      = {978-3-87155-260-1},
  pages     = {36 -- 43},
  year      = {2010},
  language  = {de}
}
@article{ReisgenSchleserJerabeketal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Messung der Strahlqualit{\"a}t einer Elektronenstrahlanlage in Umgebungsatmosph{\"a}re},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  pages     = {45 -- 52},
  year      = {2010},
  abstract  = {In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im gr{\"o}ßeren Maßstab verwendet wird, seine F{\"a}higkeit als qualitatives Werkzeug f{\"u}r die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosph{\"a}rendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualit{\"a}t, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngr{\"o}ßen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage {\"u}ber die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngr{\"o}ßen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosph{\"a}rischen Bedingungen beschrieben. Es wird zudem die Abh{\"a}ngigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleseretal.2010,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub and Chudoba, Rostislav},
  title     = {Theoretical and experimental investigations on textile-reinforced concrete spalling behavior},
  series = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  booktitle = {8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings},
  editor    = {Fisher, Gregor},
  publisher = {Technical University of Denmark, Dept. of Civil Engineering},
  address   = {Lyngby},
  organization    = {PhD Symposium in Civil Engineering <8, 2010, Lyngby> ; International Federation for Structural Concrete},
  isbn      = {9788778773012},
  pages     = {383 -- 388},
  year      = {2010},
  language  = {en}
}
@article{AhmedReisgenSchleseretal.2010,
  author    = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg},
  title     = {On formability of tailor laser welded blanks of DP/TRIP steel sheets},
  series = {Science and technology of welding and joining},
  volume    = {15},
  journal   = {Science and technology of welding and joining},
  number    = {5},
  publisher = {Maney},
  address   = {Leeds},
  issn      = {1743-2936},
  doi       = {10.1179/136217110X12731414739754},
  pages     = {337 -- 342},
  year      = {2010},
  abstract  = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@inproceedings{ReisgenSchleserSchiebahnetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Schiebahn, Alexander and Harms, Alexander},
  title     = {Einfluss der Maschineneigenschaften beim Widerstandspunktschweißen mit Schweißzangen},
  series = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]},
  booktitle = {Treffpunkt Widerstandsschweißen : Vortr{\"a}ge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]},
  publisher = {GSI SLV Duisburg},
  address   = {Duisburg},
  organization    = {Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren ; Schweißtechnische Lehr- und Versuchsanstalt <Duisburg> ; DVS-Sondertagung Widerstandsschweißen <21, 2010, Duisburg>},
  pages     = {147 -- 149},
  year      = {2010},
  language  = {de}
}
@inproceedings{SchoeneReisgenSchleseretal.2011,
  author    = {Schoene, Jens and Reisgen, Uwe and Schleser, Markus and Jerabek, Jakub},
  title     = {Theoretische und experimentelle Untersuchung des spaltungsinduzierten Versagens von TRC Pr{\"u}fk{\"o}rpern},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-245-1},
  pages     = {73 -- 84},
  year      = {2011},
  language  = {de}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@inproceedings{ReisgenSchleserAbdurakhmanovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Turichin, Gleb and Valdaitseva, Elena and Bach, Friedrich-Wilhelm and Hassel, Thomas and Beniyashi, Alexander},
  title     = {Investigation of factors for defect-free weld formation by non-vacuum electron beam welding},
  series = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  booktitle = {Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine},
  publisher = {Paton Publ. House},
  address   = {Kiev},
  pages     = {104 -- 109},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel},
  series = {ISIJ international},
  volume    = {Vol. 51},
  journal   = {ISIJ international},
  number    = {No. 3},
  publisher = {ISIJ},
  address   = {Tōkyō},
  organization    = {Iron and Steel Institute of Japan (ISIJ)},
  issn      = {1347-5460 (E-Journal); 0915-1559 (Print)},
  pages     = {429 -- 434},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Naumov, Andreas},
  title     = {Erweiterung des Parameterfelds zum R{\"u}hrreibschweißen mittels konduktiver Unterst{\"u}tzung},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 63},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 12},
  publisher = {DVS-Media GmbH},
  address   = {D{\"u}sseldorf},
  issn      = {0036-7184},
  pages     = {710 -- 714},
  year      = {2011},
  language  = {de}
}
@inproceedings{ReisgenSchleserScheiketal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven and Michaeli, Walter and Gr{\"o}nlund, Oliver and Neuß, Andreas and Wunderle, Johannes and Poprawe, Reinhart and R{\"o}sner, A. and Bobzin, Kirsten and Schl{\"a}fer, Thomas and Theiß, Sebastian and Kutschmann, Pia and Haberstroh, Edmund and Flock, Dustin and B{\"u}hrig-Polaczek, Andreas and Jakob, M.},
  title     = {Novel process chains for the production of plastics/metal-hybrids},
  series = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  booktitle = {17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011},
  editor    = {Thoben, Klaus-Dieter},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  organization    = {Forschungsinstitut f{\"u}r Rationalisierung <Aachen> ; International Conference on Concurrent Enterprising <17, 2011, Aachen>},
  isbn      = {978-1-457-70772-8 ; 978-3-943024-05-0},
  pages     = {596 -- 604},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserHarmsetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Harms, Alexander and Schiebahn, Alexander and Thiele, Regina},
  title     = {Elektromobilit{\"a}t - Herausforderungen an die F{\"u}getechnik},
  series = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  volume    = {Jg. 1},
  journal   = {mobilit{\"a}t morgen - Magazin zu Mobilit{\"a}t und Elektromobilit{\"a}t},
  number    = {Nr. 2},
  editor    = {Kampker, Achim},
  pages     = {16 -- 17},
  year      = {2011},
  language  = {de}
}
@techreport{BleckReisgenSchleseretal.2011,
  author    = {Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Prahl, Ulrich and Mukherjee, Krishnendu and Abdurakhmanov, Aydemir},
  title     = {Konsistentes Materialmodell f{\"u}r Umwandlung und mechanische Eigenschaften beim Schweißen hochfester Mehrphasen-St{\"a}hle : IGF-Vorhaben 15548 N. (FAT-Schriftenreihe ; 234)},
  publisher = {VDA},
  address   = {Berlin},
  organization    = {Forschungsvereinigung Automobiltechnik},
  pages     = {XVI, 17 - 174 S. Ill., graph. Darst.},
  year      = {2011},
  language  = {de}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{AgrafiotisMavroidisKonstandopoulosetal.2007,
  author    = {Agrafiotis, Christos C. and Mavroidis, Ilias and Konstandopoulos, Athansios G. and Hoffschmidt, Bernhard and Stobbe, Per and Romero, Manuel and Fernandez-Quero, Valerio},
  title     = {Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation},
  series = {Solar energy materials and solar cells},
  volume    = {Vol. 91},
  journal   = {Solar energy materials and solar cells},
  number    = {Iss. 6},
  issn      = {1879-3398 (E-Journal); 0927-0248 (Print)},
  pages     = {474 -- 488},
  year      = {2007},
  language  = {en}
}
@techreport{HoffschmidtVaessenHolzheidetal.2009,
  author    = {Hoffschmidt, Bernhard and Vaeßen, Christiane and Holzheid, Fabian and Gonsior, Daniel},
  title     = {Abschlussbericht Mix-SCR : Effizientes SCR-System unter Verwendung eines innovativen statischen Mischers : Kurztitel: Mix-SCR. F{\"o}rderkennzeichen: 1782X05},
  pages     = {62 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2009},
  language  = {de}
}
@techreport{HoffschmidtReisselTammeetal.2008,
  author    = {Hoffschmidt, Bernhard and Reißel, Martin and Tamme, Rainer and Hack, Udo and Vostan, Peter},
  title     = {Entwicklung eines thermischen Sandspeichers im Temperaturbereich 400-900 Grad C (Sandspeicher) : Schlussbericht. F{\"o}rderkennzeichen 1738X04},
  pages     = {70 S. : zahlr. Ill. u. graph. Darst.},
  year      = {2008},
  language  = {de}
}
@inproceedings{FendHoffschmidtReutteretal.2006,
  author    = {Fend, Thomas and Hoffschmidt, Bernhard and Reutter, Oliver and Sauerhering, J{\"o}rg and Pitz-Paal, Robert},
  title     = {Gas flow in hot porous materials: the solar air receiver and spin-off applications},
  series = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland},
  booktitle = {Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland},
  publisher = {ASME},
  address   = {New York, NY},
  organization    = {International Conference on Nanochannels, Microchannels and Minichannels <4, 2006, Limerick>},
  isbn      = {0-7918-4760-8},
  pages     = {507 -- 514},
  year      = {2006},
  language  = {en}
}
@inproceedings{HoffschmidtSchwarzerSpaeteetal.2006,
  author    = {Hoffschmidt, Bernhard and Schwarzer, Klemens and Sp{\"a}te, Frank and K{\"o}tter, Jens and Ebert, Miriam and Sierck, Olaf},
  title     = {Development of a small modular parabolic trough collector},
  series = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain},
  booktitle = {13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain},
  publisher = {SolarPaces},
  address   = {[o.O.]},
  organization    = {International Symposium on Concentrating Solar Power and Chemical Energy Systems <13, 2006, Sevilla>},
  isbn      = {8478345191},
  pages     = {1 CD-ROM},
  year      = {2006},
  language  = {en}
}
@article{SchleserWalkLaufferRaupachetal.2006,
  author    = {Schleser, Markus and Walk-Lauffer, Bernd and Raupach, Michael and Dilthey, Ulrich},
  title     = {Application of polymers for textile-reinforced concrete},
  series = {Journal of materials in civil engineering : properties, applications, durability},
  volume    = {18},
  journal   = {Journal of materials in civil engineering : properties, applications, durability},
  number    = {5},
  issn      = {0899-1561},
  pages     = {670 -- 676},
  year      = {2006},
  language  = {en}
}
@article{FeldmannPakGessleretal.2006,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Dilthey, Ulrich and Schleser, Markus},
  title     = {Bonded connections for textile reinforced concrete structures},
  series = {Cailiao-gongcheng = Journal of materials engineering},
  journal   = {Cailiao-gongcheng = Journal of materials engineering},
  number    = {Special iss.},
  issn      = {1001-4381},
  pages     = {123 -- 127},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleserChudobaetal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Chudoba, Rostislav and Konrad, Martin},
  title     = {Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics},
  series = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  booktitle = {Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007},
  editor    = {Triantafillou, T. C.},
  publisher = {Univ.},
  address   = {Patras},
  organization    = {International Symposium on Fibre-Reinforced Polymer Reinforcement for Concrete Structures <8, 2007, Patras>},
  isbn      = {9608969107},
  pages     = {456 -- 457},
  year      = {2007},
  language  = {en}
}
@inproceedings{DiltheySchleserHeggeretal.2007,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hegger, Josef and Voss, Stefan},
  title     = {Load-bearing behaviour of polymer-impregnated textiles in concrete},
  series = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  booktitle = {Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)},
  editor    = {Reinhardt, Hans W.},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Workshop on High Performance Fiber Reinforced Cement Composites <5, 2007, Mainz>},
  isbn      = {978-2-35158-046-2},
  pages     = {183 -- 192},
  year      = {2007},
  language  = {en}
}
@book{AppelBraehlerDahlhausetal.2010,
  author    = {Appel, Wolfgang and Br{\"a}hler, Hermann and Dahlhaus, Ulrich and Esch, Thomas and Kopp, Stephan and Rhein, Bernd},
  title     = {Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 6., {\"u}berarb. Aufl.},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-9757-2},
  pages     = {XXVIII, 509 S. : Ill., graph. Darst.},
  year      = {2010},
  language  = {de}
}
@book{AppelBraehlerBreueretal.2013,
  author    = {Appel, Wolfgang and Br{\"a}hler, Hermann and Breuer, Stefan and Dahlhaus, Ulrich and Esch, Thomas and Hoepke, Erich and Kopp, Stephan and Rhein, Bernd},
  title     = {Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 7., {\"u}berarb. u. erw. Aufl.},
  publisher = {Vieweg + Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-2224-6},
  pages     = {XXXII, 620 S. : Ill., graph. Darst.},
  year      = {2013},
  language  = {de}
}
@inproceedings{DiltheySchleserMoelleretal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and M{\"o}ller, M. and Weichhold, O.},
  title     = {Application of polymers in textile reinforced concrete : from the interface to construction elements},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {55 -- 64},
  year      = {2006},
  language  = {en}
}
@inproceedings{RaupachOrlowskyBuettneretal.2006,
  author    = {Raupach, Michael and Orlowsky, Jeannette and B{\"u}ttner, T. and Dilthey, Ulrich and Schleser, Markus},
  title     = {Epoxy-impregnated textiles in concrete - load bearing capacity and durability},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {77 -- 88},
  year      = {2006},
  language  = {en}
}
@inproceedings{PakPiegelerFeldmannetal.2006,
  author    = {Pak, Daniel and Piegeler, D. and Feldmann, Markus and Schleser, Markus and Dilthey, Ulrich},
  title     = {Hybrid joints of textile reinforced concrete parts - designed for assembly},
  series = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  booktitle = {Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)},
  editor    = {Hegger, Josef},
  publisher = {RILEM Publ.},
  address   = {Bagneux},
  organization    = {International Conference on Textile Reinforced Concrete <1, 2006, Aachen>},
  isbn      = {2-912143-97-7},
  pages     = {181 -- 190},
  year      = {2006},
  language  = {en}
}
@inproceedings{DiltheySchleser2006,
  author    = {Dilthey, Ulrich and Schleser, Markus},
  title     = {Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles},
  series = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  booktitle = {International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimar{\~a}es, Portugal},
  editor    = {Barroso de Aguiar, Jose and Jalali, Said and Camoes, Aires and Ferrera, Rui Miguel},
  publisher = {Universidade do Minho, Departamento de Engenharia Civil},
  address   = {Guimar{\~a}es},
  organization    = {International Symposium in Concrete <2006, Guimar{\~a}es)},
  isbn      = {972-99179-1-4},
  pages     = {185 -- 192},
  year      = {2006},
  language  = {en}
}
@inproceedings{Meliss1985,
  author    = {Meliß, Michael},
  title     = {Biomasse-Potential},
  series = {Energie aus Biomasse : Erfahrungen mit verschiedenen technischen L{\"o}sungen und Zukunftsaussichten; Tagungsbericht; [Fachtagung, 18. - 19. November 1985, Freising]},
  booktitle = {Energie aus Biomasse : Erfahrungen mit verschiedenen technischen L{\"o}sungen und Zukunftsaussichten; Tagungsbericht; [Fachtagung, 18. - 19. November 1985, Freising]},
  publisher = {Techn. Univ.},
  address   = {M{\"u}nchen},
  organization    = {International Solar Energy Society},
  pages     = {1 -- 30},
  year      = {1985},
  language  = {de}
}
@article{DiltheySchleserHanischetal.2006,
  author    = {Dilthey, Ulrich and Schleser, Markus and Hanisch, Vera and Gries, Thomas},
  title     = {Garnzugpr{\"u}fung polymergetr{\"a}nkter Textilien f{\"u}r die Bewehrung von Beton},
  series = {Technische Textilien},
  volume    = {49},
  journal   = {Technische Textilien},
  number    = {1},
  issn      = {0323-3243},
  pages     = {48 -- 50},
  year      = {2006},
  language  = {de}
}
@techreport{AdlerHeymerRichteretal.2009,
  author    = {Adler, J. and Heymer, H. and Richter, H. J. and Fend, Th. and Smirnova, O. and Rietbrock, P. and Petchenko, A. and Issendorff, F. v. and Steven, M. and Trimis, D. and Gonsior, Daniel and Helsper, Christoph and Hoffschmidt, Bernhard},
  title     = {INNOTRAP - innovative Rußfilter f{\"u}r LKW-Dieselmotoren : Abschlussbericht F{\"o}rderkennzeichen 16IN0313},
  pages     = {245 S. : Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@article{FeldmannPakGessleretal.2008,
  author    = {Feldmann, Markus and Pak, Daniel and Geßler, Achim and Schleser, Markus},
  title     = {Entwicklung eines Bemessungsmodells f{\"u}r punktf{\"o}rmige Verbindungen textibewehrter Betonbauteile},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Bd. 85},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {2},
  issn      = {0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351},
  pages     = {143 -- 147},
  year      = {2008},
  language  = {de}
}
@article{DiltheySchleserFeldmannetal.2008,
  author    = {Dilthey, Ulrich and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts},
  series = {Cement and concrete composites},
  volume    = {Vol. 30},
  journal   = {Cement and concrete composites},
  number    = {iss. 2},
  issn      = {0958-9465},
  pages     = {82 -- 87},
  year      = {2008},
  language  = {en}
}
@article{ReisgenSchleserFeldmannetal.2008,
  author    = {Reisgen, Uwe and Schleser, Markus and Feldmann, Martin and Pak, Daniel and Geßler, Achim},
  title     = {Kleben d{\"u}nnwandiger Bauteile aus textilbewehrtem Beton},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {Bd. 60},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {H. 7/8},
  issn      = {0036-7184},
  pages     = {408 -- 412},
  year      = {2008},
  language  = {de}
}
@inproceedings{ChudobaKonradSchleseretal.2009,
  author    = {Chudoba, Rostislav and Konrad, Martin and Schleser, Markus and Meskouris, Konstantin and Reisgen, Uwe},
  title     = {Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns},
  series = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  booktitle = {Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009},
  editor    = {Curbach, Manfred},
  publisher = {Techn. Univ.},
  address   = {Dresden},
  isbn      = {978-3-86780-122-5},
  pages     = {87 -- 98},
  year      = {2009},
  language  = {en}
}
@inproceedings{BeckmoellerWoltersBreitbachetal.1995,
  author    = {Beckm{\"o}ller, S. and Wolters, J. and Breitbach, Gerd and Penkalla, H. J. and Schubert, F.},
  title     = {Microstructural dependent constitutive equation for inelastic analysis of internally cooled IN 738 LC turbine blades},
  series = {Materials for advanced power engineering 1994 : proceedings of a conference held in Liege, Belgium, 3 - 6 Oct. 1994},
  booktitle = {Materials for advanced power engineering 1994 : proceedings of a conference held in Liege, Belgium, 3 - 6 Oct. 1994},
  publisher = {Kluwer},
  address   = {Dordrecht},
  isbn      = {0792330749},
  pages     = {829 -- 839},
  year      = {1995},
  language  = {en}
}
@techreport{Breitbach2009,
  author    = {Breitbach, Gerd},
  title     = {Endbericht f{\"u}r das Projekt FilterCaps : Vorhabensbezeichnung: Entwicklung eines W{\"a}rmespeichers f{\"u}r str{\"o}mungsrichtungsinvertierende L{\"u}ftungssysteme mit integrierter Filterwirkung : F{\"o}rderkennzeichen: 1752X06},
  pages     = {82 S.},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchleserStieglitz2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Stieglitz, Anja},
  title     = {Kleben im Schienenfahrzeugbau},
  series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>},
  isbn      = {978-3-87155-584-8},
  pages     = {182 -- 186},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchoeneSchleseretal.2009,
  author    = {Reisgen, Uwe and Schoene, Jens and Schleser, Markus and Pak, Daniel and Feldmann, Markus},
  title     = {F{\"u}getechniken f{\"u}r neuartige Bauweisen auf Basis von d{\"u}nnwandigen Strukturelementen aus textilbewehrtem Beton},
  series = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  booktitle = {Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vortr{\"a}ge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258},
  publisher = {DVS-Media},
  address   = {D{\"u}sseldorf},
  organization    = {DVS - Deutscher Verband f{\"u}r Schweißen und Verwandte Verfahren e.V. ; Große Schweißtechnische Tagung <2009, Essen>},
  isbn      = {978-3-87155-584-8},
  pages     = {312 -- 318},
  year      = {2009},
  language  = {de}
}
@inproceedings{ReisgenSchleserScheik2009,
  author    = {Reisgen, Uwe and Schleser, Markus and Scheik, Sven},
  title     = {Fortschritte beim linienf{\"o}rmigen Mikrodispensen ungef{\"u}llter Klebstoffe},
  series = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009},
  booktitle = {4. Kolloquium Mikroproduktion : Fachbeitr{\"a}ge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009},
  editor    = {Vollertsen, Frank and B{\"u}ttgenbach, Stephanus},
  publisher = {BIAS Verl.},
  address   = {Bremen},
  organization    = {Kolloquium Mikroproduktion <4, 2009, Bremen>},
  isbn      = {978-3-933762-32-0},
  pages     = {43 -- 51},
  year      = {2009},
  language  = {de}
}
@inproceedings{Meliss1977,
  author    = {Meliß, Michael},
  title     = {Potential und technische Nutzbarkeit der regenerativen Energiequellen},
  series = {1. Deutsches Sonnenforum : Tagungsbericht ; [5. Tagung am 26. bis 28. September in Hamburg]. Bd. 2},
  booktitle = {1. Deutsches Sonnenforum : Tagungsbericht ; [5. Tagung am 26. bis 28. September in Hamburg]. Bd. 2},
  publisher = {DGS},
  address   = {M{\"u}nchen},
  pages     = {473 -- 493},
  year      = {1977},
  language  = {de}
}
@article{MelissWindheim1977,
  author    = {Meliß, Michael and Windheim, R.},
  title     = {Energiequelle f{\"u}r morgen : M{\"o}glichkeiten und Grenzen der Windenergienutzung - ein Statusbericht},
  series = {VDI-Nachrichten. Bd. 31 (1977), H. 22},
  journal   = {VDI-Nachrichten. Bd. 31 (1977), H. 22},
  issn      = {0042-1758},
  pages     = {37 -- 38},
  year      = {1977},
  language  = {de}
}
@inproceedings{WalkLaufferRaupachDilgeretal.2004,
  author    = {Walk-Lauffer, Bernd and Raupach, Michael and Dilger, Klaus and B{\"o}hm, Stefan and Mundt, F. and Dilthey, Ulrich and Schleser, Markus},
  title     = {The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete},
  series = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  booktitle = {Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Universit{\`a} degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction},
  publisher = {Liguori},
  address   = {Napoli},
  pages     = {150 -- 159},
  year      = {2004},
  language  = {en}
}
@inproceedings{DiltheyMundRaupachetal.2004,
  author    = {Dilthey, Ulrich and Mund, F. and Raupach, Michael and Schleser, Markus and Walk-Lauffer, Bernd},
  title     = {Improvement of textile reinforced concrete by polymer additives},
  series = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  booktitle = {ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch},
  publisher = {BAM},
  address   = {Berlin},
  isbn      = {3-00-013706-8},
  pages     = {469 -- 476},
  year      = {2004},
  language  = {en}
}
@article{DiltheyBrandenburgSchleser2004,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Dispensing and application of unfilled adhesives in the micro range},
  series = {Welding and cutting. 3 (2004), H. 4},
  journal   = {Welding and cutting. 3 (2004), H. 4},
  issn      = {1612-3433},
  pages     = {250 -- 254},
  year      = {2004},
  language  = {en}
}
@article{SedlacekSchaetzkeGessleretal.2004,
  author    = {Sedlacek, G. and Sch{\"a}tzke, C. and Geßler, M. and Schleser, Markus},
  title     = {F{\"u}gen von Bauteilen aus textilbewehrtem Beton},
  series = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  journal   = {Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Bd. 79 (2004), H. 12},
  issn      = {0005-6650},
  pages     = {569 -- 575},
  year      = {2004},
  language  = {de}
}
@incollection{DiltheyBrandenburgSchleser2005,
  author    = {Dilthey, Ulrich and Brandenburg, Annette and Schleser, Markus},
  title     = {Mikrokleben},
  series = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  booktitle = {Montage hybrider Mikrosysteme : Handhabungs- und F{\"u}getechniken f{\"u}r die Klein- und Mittelserienfertigung},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-23706-8},
  pages     = {161 -- 172},
  year      = {2005},
  language  = {de}
}
@inproceedings{KolkmannGriesSchleseretal.2005,
  author    = {Kolkmann, Annette and Gries, Thomas and Schleser, Markus and Dilthey, Ulrich},
  title     = {Innovative yarn structures and coatings for textile reinforced concrete},
  series = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  booktitle = {All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main},
  address   = {Frankfurt a.M.},
  pages     = {1 CD-ROM},
  year      = {2005},
  language  = {en}
}
@article{DiltheySchleserGessleretal.2005,
  author    = {Dilthey, Ulrich and Schleser, Markus and Geßler, Achim and Rettweiler, Timo and V{\"o}lling, Boris},
  title     = {Kleben textilbewehrter Betonbauteile},
  series = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  journal   = {Schweissen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8},
  issn      = {0036-7184},
  pages     = {373 -- 377},
  year      = {2005},
  language  = {de}
}
@incollection{SchumacherSchwarzerStukenbrocketal.2009,
  author    = {Schumacher, Werner and Schwarzer, Klemens and Stukenbrock, Philipp and Rodriguez, Nadia},
  title     = {Entwicklung und Anwendungsgebiete solarthermischer Kraftwerke - Betriebsweise und Systemvarianten},
  series = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  booktitle = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  publisher = {Thom{\´e}-Kozmiensky Verlag},
  address   = {Neuruppin},
  isbn      = {978-3-935317-43-6},
  pages     = {401 -- 434},
  year      = {2009},
  language  = {de}
}
@incollection{KollSchwarzboezlHenneckeetal.2009,
  author    = {Koll, Gerritt and Schwarzb{\"o}zl, Peter and Hennecke, Klaus and Hoffschmidt, Bernhard and Hartz, Thomas},
  title     = {Solarthermisches Turmkraftwerk in J{\"u}lich},
  series = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  booktitle = {Erneuerbare Energien. Bd. 2 : Ersatzbrennstoffe, Biomasse und Biogas, Solar- und Windenergie / Karl J. Thom{\´e}-Kozmiensky [Hrsg.]},
  publisher = {Thom{\´e}-Kozmiensky Verlag},
  address   = {Neuruppin},
  pages     = {455 -- 460},
  year      = {2009},
  language  = {de}
}
@book{Esch2007,
  author    = {Esch, Thomas},
  title     = {Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. Bd. 1},
  publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik},
  address   = {Aachen},
  pages     = {Getr. Z{\"a}hlung : zahlr. Ill. und graph. Darst.},
  year      = {2007},
  language  = {de}
}
@book{Esch2007,
  author    = {Esch, Thomas},
  title     = {Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. Bd. 2},
  publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik},
  address   = {Aachen},
  pages     = {Getr. Z{\"a}hlung : zahlr. Ill. und graph. Darst.},
  year      = {2007},
  language  = {de}
}
@book{Esch2012,
  author    = {Esch, Thomas},
  title     = {Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 2. Aufl. Bd. 2},
  publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik},
  address   = {Aachen},
  pages     = {Getr. Z{\"a}hlung : zahlr. Ill. und graph. Darst.},
  year      = {2012},
  language  = {de}
}
@book{Esch2008,
  author    = {Esch, Thomas},
  title     = {Verbrennungstechnik : Vorlesungsumdruck. 7. Aufl.},
  publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik},
  address   = {Aachen},
  pages     = {Getr. Z{\"a}hlung : Ill. und graph. Darst.},
  year      = {2008},
  language  = {de}
}
@book{Esch2011,
  author    = {Esch, Thomas},
  title     = {Verbrennungstechnik : Vorlesungsumdruck. 8. Aufl.},
  publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik},
  address   = {Aachen},
  pages     = {Getr. Z{\"a}hlung : Ill. und graph. Darst.},
  year      = {2011},
  language  = {de}
}
@book{Schmitz2013,
  author    = {Schmitz, G{\"u}nter},
  title     = {Elektrotechnik f{\"u}r Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Hauptbd.: Gleichspannungstechnik, Wechselspannungstechnik, Elektrische Maschinen},
  publisher = {Schmitz},
  address   = {Aachen},
  isbn      = {978-1-481830-60-7},
  pages     = {150 S. : Ill., graph. Darst.},
  year      = {2013},
  language  = {de}
}
@book{Schmitz2013,
  author    = {Schmitz, G{\"u}nter},
  title     = {Elektrotechnik f{\"u}r Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Aufgabensammlung, [{\"U}bungs- und Klausuraufgaben]},
  publisher = {Schmitz},
  address   = {Aachen},
  isbn      = {978-1-482721-47-8},
  pages     = {140 S. : graph. Darst.},
  year      = {2013},
  language  = {de}
}
@book{Esch2009,
  author    = {Esch, Thomas},
  title     = {Raumfahrtantriebe. 7. Aufl., [Umdruck]},
  publisher = {Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik},
  address   = {Aachen},
  pages     = {Getr. Z{\"a}hlung : Ill. und graph. Darst.},
  year      = {2009},
  language  = {de}
}
@article{Meliss1985,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 37 (1985), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 37 (1985), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {145 -- 150},
  year      = {1985},
  language  = {de}
}
@article{Meliss1984,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 36 (1984), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 36 (1984), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {134 -- 139},
  year      = {1984},
  language  = {de}
}
@article{Meliss1983,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 35 (1983), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 35 (1983), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {150 -- 155},
  year      = {1983},
  language  = {de}
}
@article{Meliss1982,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen},
  series = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 34 (1982), H. 4},
  journal   = {Brennstoff, W{\"a}rme, Kraft : BWK ; das Energie-Fachmagazin. Bd. 34 (1982), H. 4},
  issn      = {0006-9612 (Print) ; 1436-4883 (E-Journal)},
  pages     = {182 -- 189},
  year      = {1982},
  language  = {de}
}