@inproceedings{EngelThieringerTippkoetter2016,
  author    = {Engel, Mareike and Thieringer, Julia and Tippk{\"o}tter, Nils},
  title     = {Linking bioprocess engineering and electrochemistry for sustainable biofuel production},
  series = {Young Researchers Symposium, YRS 2016. Proceedings},
  booktitle = {Young Researchers Symposium, YRS 2016. Proceedings},
  publisher = {Fraunhofer Verlag},
  address   = {Karlsruhe},
  pages     = {49 -- 53},
  year      = {2016},
  abstract  = {Electromicrobial engineering is an emerging, highly interdisciplinary research area linking bioprocesses with electrochemistry. In this work, microbial electrosynthesis (MES) of biobutanol is carried out during acetone-butanol-ethanol (ABE) fermentations with Clostridium acetobutylicum. A constant electric potential of -600mV (vs. Ag/AgCl) with simultaneous addition of the soluble redox mediator neutral red is used in order to study the electron transfer between the working electrode and the bacterial cells. The results show an earlier initiation of solvent production for all fermentations with applied potential compared to the conventional ABE fermentation. The f inal butanol concentration can be more than doubled by the application of a negative potential combined with addition of neutral red. Moreover a higher biofilm formation on the working electrode compared to control cultivations has been observed. In contrast to previous studies, our results also indicate that direct electron transfer (DET) might be possible with C. acetobutylicum. The presented results make microbial butanol production economically attractive and therefore support the development of sustainable production processes in the chemical industry aspired by the "Centre for resource-efficient chemistry and raw material change" as well as the the project "NanoKat" working on nanostructured catalysts in Kaiserslautern.},
  language  = {en}
}
@misc{TippkoetterUlber2012,
  author    = {Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Rezension zu: Encyclopedia of Industrial Biotechnology, Vol. 1-7. By MC Flickinger.},
  series = {Chemie Ingenieur Technik},
  volume    = {6},
  journal   = {Chemie Ingenieur Technik},
  number    = {84},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201290052},
  pages     = {936},
  year      = {2012},
  language  = {en}
}
@article{TippkoetterDeterdingUlber2008,
  author    = {Tippk{\"o}tter, Nils and Deterding, A. and Ulber, Roland},
  title     = {Determination of acetic acid in fermentation broth by gas-diffusion technique},
  series = {Engineering in Life Sciences},
  volume    = {8},
  journal   = {Engineering in Life Sciences},
  number    = {1, Special Issue: Technical Systems for the Use in Life Sciences},
  doi       = {10.1002/elsc.200820227},
  pages     = {62 -- 67},
  year      = {2008},
  abstract  = {Due to the interfering effects of acetic acid in many fermentation processes, a gas-diffusion technique was developed for the online determination of acetic acid. The measurements were accomplished with a flow diffusion analysis (FDA) unit from the TRACE Analytics GmbH, Braunschweig, Germany. The diffusion analysis is based on the UV-absorbance of acetic acid at 205 nm. The measurement was achieved by the separation of an acceptor and a carrier stream (acidified fermentation broth) using a gas permeable polytetrafluoroethylene (PTFE) membrane, whereby broth constituents that would otherwise disturb the UV-measurement of acetic acid, are held back efficiently. Merely, the fermentation by-products, e.g. formic acid, is capable of diffusing through the membrane. While formic acid can disturb the measurement, carbon dioxide does not absorb at 205 nm. The method operates with time-dependent sample enrichment. During the analysis, a small volume of the acceptor stream is stopped for a defined time interval in the acceptor chamber. During this period, the gaseous acetic acid diffuses through the membrane and is enriched in the acceptor chamber. Subsequently after the enrichment, the acceptor stream flows through a UV-detector. The intensity of the signal is proportional to the acetic acid concentration. Online measurements in bioreactors via a sterile filtration probe have been accomplished. A linear calibration in the range of 0.5-5.0 g/L acetic acid with a relative standard deviation of <5 \% was obtained. A sampling rate of 8 samples per hour was possible. The system was applied for the determination of acetic acid in E. coli fermentation broth. The instrument is easy to clean, very user-friendly and does not require any toxic or expensive reagents.},
  language  = {en}
}
@incollection{MufflerPothSiekeretal.2011,
  author    = {Muffler, Kai and Poth, Sabastian and Sieker, Tim and Tippk{\"o}tter, Nils and Ulber, Roland and Sell, Dieter},
  title     = {Bio-feedstocks},
  series = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  booktitle = {Comprehensive biotechnology : principles and practices in industry, agcriculture, medicine and the environment. Volume 2: Engineering fundamentals of biotechnology},
  editor    = {Moo-Young, Murray},
  edition   = {2. edition},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {978-0-444-53352-4},
  doi       = {10.1016/B978-0-08-088504-9.00088-X},
  pages     = {93 -- 101},
  year      = {2011},
  language  = {en}
}
@article{FalkenbergRahbaFischeretal.2022,
  author    = {Falkenberg, Fabian and Rahba, Jade and Fischer, David and Bott, Michael and Bongaerts, Johannes and Siegert, Petra},
  title     = {Biochemical characterization of a novel oxidatively stable, halotolerant, and high-alkaline subtilisin from Alkalihalobacillus okhensis Kh10-101T},
  series = {FEBS Open Bio},
  volume    = {12},
  journal   = {FEBS Open Bio},
  number    = {10},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {2211-5463},
  doi       = {10.1002/2211-5463.13457},
  pages     = {1729 -- 1746},
  year      = {2022},
  abstract  = {Halophilic and halotolerant microorganisms represent a promising source of salt-tolerant enzymes suitable for various biotechnological applications where high salt concentrations would otherwise limit enzymatic activity. Considering the current growing enzyme market and the need for more efficient and new biocatalysts, the present study aimed at the characterization of a high-alkaline subtilisin from Alkalihalobacillus okhensis Kh10-101T. The protease gene was cloned and expressed in Bacillus subtilis DB104. The recombinant protease SPAO with 269 amino acids belongs to the subfamily of high-alkaline subtilisins. The biochemical characteristics of purified SPAO were analyzed in comparison with subtilisin Carlsberg, Savinase, and BPN'. SPAO, a monomer with a molecular mass of 27.1 kDa, was active over a wide range of pH 6.0-12.0 and temperature 20-80 °C, optimally at pH 9.0-9.5 and 55 °C. The protease is highly oxidatively stable to hydrogen peroxide and retained 58\% of residual activity when incubated at 10 °C with 5\% (v/v) H2O2 for 1 h while stimulated at 1\% (v/v) H2O2. Furthermore, SPAO was very stable and active at NaCl concentrations up to 5.0 m. This study demonstrates the potential of SPAO for biotechnological applications in the future.},
  language  = {en}
}
@book{WagemannTippkoetter2019,
  author    = {Wagemann, Kurt and Tippk{\"o}tter, Nils},
  title     = {Biorefineries / Kurt Wagemann, Nils Tippk{\"o}tter (editors)},
  series = {Advances in biochemical engineering/biotechnology book series (ABE)},
  journal   = {Advances in biochemical engineering/biotechnology book series (ABE)},
  publisher = {Springer},
  address   = {Cham (Switzerland)},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/978-3-319-97119-3},
  pages     = {VI, 549 Seiten},
  year      = {2019},
  language  = {en}
}
@article{TippkoetterRoth2020,
  author    = {Tippk{\"o}tter, Nils and Roth, Jasmine},
  title     = {Purified Butanol from Lignocellulose - Solvent-Impregnated Resins for an Integrated Selective Removal},
  series = {Chemie Ingenieur Technik},
  volume    = {92},
  journal   = {Chemie Ingenieur Technik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1522-2640},
  doi       = {10.1002/cite.202000200},
  pages     = {1741 -- 1751},
  year      = {2020},
  abstract  = {In traditional microbial biobutanol production, the solvent must be recovered during fermentation process for a sufficient space-time yield. Thermal separation is not feasible due to the boiling point of n-butanol. As an integrated and selective solid-liquid separation alternative, solvent impregnated resins (SIRs) were applied. Two polymeric resins were evaluated and an extractant screening was conducted. Vacuum application with vapor collection in fixed-bed column as bioreactor bypass was successfully implemented as butanol desorption step. In course of further increasing process economics, fermentation with renewable lignocellulosic substrates was conducted using Clostridium acetobutylicum. Utilization of SIR was shown to be a potential strategy for solvent removal from fermentation broth, while application of a bypass column allows for product removal and recovery at once.},
  language  = {en}
}
@misc{WollnyStadtmuellerTippkoetteretal.2012,
  author    = {Wollny, S. and Stadtm{\"u}ller, R. and Tippk{\"o}tter, Nils and Oster, J. and Kampeis, P. and Ulber, Roland},
  title     = {Optimierung der selektiven Aufarbeitung von Proteinen mit Aptamer-funktionalisierten Magnetpartikeln},
  series = {Chemie Ingenieur Technik},
  volume    = {84},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201250031},
  pages     = {1203},
  year      = {2012},
  abstract  = {Die Herstellung pharmakologisch relevanter Proteine durch Mikroorganismen f{\"u}hrt eine mehrstufige Aufarbeitung mit sich. Durch die Verwendung von Aptameren, kurzen einzelstr{\"a}ngigen DNA- oder RNA-Oligonukleotiden immobilisiert auf funktionalisierten, wiederverwendbaren Magnetpartikeln, k{\"o}nnen mehrere dieser Abtrennungsoperationen kombiniert und damit die Prozesskosten minimiert werden. Aufgrund der definierten dreidimensionalen Struktur k{\"o}nnen Aptamere kleine organische Molek{\"u}le hochspezifisch binden. Im vorgestellten Projekt wird die Aufarbeitung von His6-GFP als Modellprotein mithilfe der mit Aptamer funktionalisierten Magnetpartikel durchgef{\"u}hrt. In bisherigen Versuchen wurde die Bindung von Aptameren auf den magnetischen Partikeln sowie die Bindung des Modellproteins GFP auf den Partikeln optimiert. Des Weiteren wurden mehrere Strategien zur Elution des GFPs von den Partikeln verfolgt, um den Proteinertrag zu maximieren und die Partikel rezyklieren zu k{\"o}nnen. Die Untersuchung unspezifischer Bindungen von Zelltr{\"u}mmern und Proteinen an die Magnetpartikel wurde mithilfe eines konfokalen Laser-Scanning-Mikroskops durchgef{\"u}hrt.},
  language  = {de}
}
@article{UndenBongaerts1997,
  author    = {Unden, Gottfried and Bongaerts, Johannes},
  title     = {Alternative respiratory pathways of Escherichia coli: energetics and transcriptional regulation in response to electron acceptors},
  series = {Biochimica et biophysica acta (BBA) - Bioenergetics},
  volume    = {Vol. 1320},
  journal   = {Biochimica et biophysica acta (BBA) - Bioenergetics},
  number    = {Iss. 3},
  issn      = {1879-2650 (E-Journal); 0005-2728 (Print)},
  pages     = {217 -- 234},
  year      = {1997},
  language  = {en}
}
@inproceedings{HeringUlberTippkoetter2016,
  author    = {Hering, T. and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Development of a screening system for antimicrobial surfaces},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {129},
  year      = {2016},
  language  = {en}
}
@article{TixMollKrafftetal.2024,
  author    = {Tix, Julian and Moll, Fabian and Krafft, Simone and Betsch, Matthias and Tippk{\"o}tter, Nils},
  title     = {Hydrogen production from enzymatic pretreated organic waste with thermotoga neapolitana},
  series = {Energies},
  volume    = {17},
  journal   = {Energies},
  number    = {12},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en17122938},
  pages     = {20 Seiten},
  year      = {2024},
  abstract  = {Biomass from various types of organic waste was tested for possible use in hydrogen production. The composition consisted of lignified samples, green waste, and kitchen scraps such as fruit and vegetable peels and leftover food. For this purpose, the enzymatic pretreatment of organic waste with a combination of five different hydrolytic enzymes (cellulase, amylase, glucoamylase, pectinase and xylase) was investigated to determine its ability to produce hydrogen (H2) with the hydrolyzate produced here. In course, the anaerobic rod-shaped bacterium T. neapolitana was used for H2 production. First, the enzymes were investigated using different substrates in preliminary experiments. Subsequently, hydrolyses were carried out using different types of organic waste. In the hydrolysis carried out here for 48 h, an increase in glucose concentration of 481\% was measured for waste loads containing starch, corresponding to a glucose concentration at the end of hydrolysis of 7.5 g·L-1. In the subsequent set fermentation in serum bottles, a H2 yield of 1.26 mmol H2 was obtained in the overhead space when Terrific Broth Medium with glucose and yeast extract (TBGY medium) was used. When hydrolyzed organic waste was used, even a H2 yield of 1.37 mmol could be achieved in the overhead space. In addition, a dedicated reactor system for the anaerobic fermentation of T. neapolitana to produce H2 was developed. The bioreactor developed here can ferment anaerobically with a very low loss of produced gas. Here, after 24 h, a hydrogen concentration of 83\% could be measured in the overhead space.},
  language  = {en}
}
@misc{CapitainLukebaUlberetal.2018,
  author    = {Capitain, C. C. and Lukeba, L. and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Biomimetische Klebstoffe aus Organosolv-Lignin},
  series = {Chemie Ingenieur Technik},
  volume    = {90},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201855076},
  pages     = {1167},
  year      = {2018},
  abstract  = {Aufgrund von EU-Regularien und Umweltinitiativen w{\"a}chst der Markt f{\"u}r nachhaltige und abbaubare Klebstoffe stetig. Organosolv (OS)-Lignin ist ein kommerziell wenig ertragreicher Nebenstrom der Lignocellulose-Bioraffinerie. Durch das "Nachahmen" der Adh{\"a}sionseigenschaften mit strukturverwandten Muschel-Aminos{\"a}uren soll OS-Lignin in einen starkes, vollst{\"a}ndig biobasiertes Adh{\"a}siv umgewandelt werden. Funktionsweisend f{\"u}r die Adh{\"a}sion des Muschelklebstoffes ist die Catecholgruppe der Aminos{\"a}ure L-DOPA. Die laccase-katalysierte Polymerisationsreaktion von Lignin und L-DOPA ist schwierig zu kontrollieren, da L-DOPA eine Ringschlussreaktion eingeht. Stattdessen wurde eine zweistufige Reaktion mit einem Diamin als Ankermolek{\"u}l etabliert. Die Catecholgruppe, die im zweiten Schritt enzymatisch an das Lignin-Amin gebunden wird, kann durch Komplexbildung mit Fe(III)-Ionen sowohl zur Adh{\"a}sion als auch zur Koh{\"a}sion des Klebstoffes beitragen. Der Lignin-Catechol-Klebstoff ist frei von petrochemischen Chemikalien und biologisch abbaubar. In ersten Stirnzugversuchen konnte eine Haftkraft von 0,3 MPa erreicht werden.},
  language  = {de}
}
@inproceedings{CapitainHeringTippkoetteretal.2016,
  author    = {Capitain, C. and Hering, T. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Enzymatic polymerization of lignin model compounds and solubilized lignin in an aqueous ethanol extract},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {151 -- 152},
  year      = {2016},
  language  = {en}
}
@misc{AlKaidyTippkoetterKaiseretal.2014,
  author    = {Al-Kaidy, H. and Tippk{\"o}tter, Nils and Kaiser, P. and Wollny, S. and Ulber, Roland},
  title     = {Aufreinigung von Cytochrom P450BMP mittels magnetischer Partikel und die enzymatische Synthese von 9, 10-Dihydroxystearins{\"a}ure},
  series = {Chemie Ingenieur Technik},
  volume    = {86},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201450420},
  pages     = {1420},
  year      = {2014},
  abstract  = {Cytochrom P450 sind H{\"a}m-Proteine, die zur Enzymklasse der Oxidoreduktasen (EC 1.14.xy) geh{\"o}ren. Eine wichtige Reaktion ist die Hydroxylierung nichtaktivierter C-H-Bindungen, die in technischen Systemen von großem Interesse ist. Durch die Verwendung von M-IDA-2-Partikeln ist eine direkte Aufreinigung mit gleichzeitiger Immobilisierung und die Applikation der Enzyme aus dem Zelllysat m{\"o}glich. Damit ist das Verfahren mehr als f{\"u}nf Stunden schneller als die konventionelle Chromatographie und mehr als 80 \% der Aufreinigungszeit wird gespart. Mit dem isolierten nativen Enzym konnte die Plattformchemikalie 9,10-Dihydroxystearins{\"a}ure aus {\"O}ls{\"a}ure hergestellt werden. Unter anderem f{\"u}r die Kunststoffindustrie k{\"o}nnen aus diesem Produkt wichtige Monomere wie z. B. Azelains{\"a}ure hergestellt werden. Die Bildung des Produkts erfolgt in einem zweiphasigen Reaktionssystem an der Grenzfl{\"a}che zwischen dem {\"O}l und der w{\"a}ssrigen Phase als Feststoff. Um das immobilisierte Enzym aktiv in die obere Phase zu transportieren, wurde eine neue magnetische Mischvorrichtung entwickelt. Das Reaktionsprodukt wurde mit NMR, GC-MS und HPLC-MS analysiert und mit einem chemisch synthetisierten Standard von 9,10-Dihydroxystearins{\"a}ure verglichen. Derzeit werden Studien des immobilisierten H{\"a}ms des Enzyms durchgef{\"u}hrt.},
  language  = {de}
}
@article{SchumannRoginSchneideretal.2015,
  author    = {Schumann, Christiane and Rogin, Sabine and Schneider, Horst and Tippk{\"o}tter, Nils and Oster, J{\"u}rgen and Kampeis, Percy},
  title     = {Simultane Atline-Quantifizierung von Magnetpartikeln und Mikroorganismen bei einer HGMS-Filtration},
  series = {Chemie Ingenieur Technik},
  volume    = {87},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2},
  doi       = {10.1002/cite.201300158},
  pages     = {137 -- 149},
  year      = {2015},
  abstract  = {Es wird eine neue Atline-Messmethode vorgestellt, mit der w{\"a}hrend einer Hochgradienten-Magnetseparation (HGMS)-Filtration eine simultane Quantifizierung von Magnetpartikeln und Mikroorganismen im Filtrat vorgenommen werden kann. Dabei gelingt die Quantifizierung signifikant besser als mit bisher verwendeten Messmethoden. Mit dieser Methode ist es m{\"o}glich, die Trennleistung einer HGMS-Filtration zu bestimmen und einen Filterdurchbruch durch Konzentrationsanstiege im Bereich einiger µg L-1 von Magnetpartikeln im Filtrat fr{\"u}hzeitig zu detektieren, ohne dass nennenswerte Partikelmengen verloren gehen.},
  language  = {de}
}
@incollection{ArtmannMeruvuKizildagetal.2018,
  author    = {Artmann, Gerhard and Meruvu, Haritha and Kizildag, Sefa and Temiz Artmann, Ayseg{\"u}l},
  title     = {Functional Toxicology and Pharmacology Test of Cell Induced Mechanical Tensile Stress in 2D and 3D Tissue Cultures},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_7},
  pages     = {157 -- 192},
  year      = {2018},
  abstract  = {Mechanical forces/tensile stresses are critical determinants of cellular growth, differentiation and migration patterns in health and disease. The innovative "CellDrum technology" was designed for measuring mechanical tensile stress of cultured cell monolayers/thin tissue constructs routinely. These are cultivated on very thin silicone membranes in the so-called CellDrum. The cell layers adhere firmly to the membrane and thus transmit the cell forces generated. A CellDrum consists of a cylinder which is sealed from below with a 4 μm thick, biocompatible, functionalized silicone membrane. The weight of cell culture medium bulbs the membrane out downwards. Membrane indentation is measured. When cells contract due to drug action, membrane, cells and medium are lifted upwards. The induced indentation changes allow for lateral drug induced mechanical tension quantification of the micro-tissues. With hiPS-induced (human) Cardiomyocytes (CM) the CellDrum opens new perspectives of individualized cardiac drug testing. Here, monolayers of self-beating hiPS-CMs were grown in CellDrums. Rhythmic contractions of the hiPS-cells induce membrane up-and-down deflections. The recorded cycles allow for single beat amplitude, single beat duration, integration of the single beat amplitude over the beat time and frequency analysis. Dose effects of agonists and antagonists acting on Ca2+ channels were sensitively and highly reproducibly observed. Data were consistent with published reference data as far as they were available. The combination of the CellDrum technology with hiPS-Cardiomyocytes offers a fast, facile and precise system for pharmacological and toxicological studies. It allows new preclinical basic as well as applied research in pharmacolgy and toxicology.},
  language  = {en}
}
@article{TippkoetterAlKaidyWollnyetal.2013,
  author    = {Tippk{\"o}tter, Nils and Al-Kaidy, Huschyar and Wollny, Steffen and Ulber, Roland},
  title     = {Functionalized magnetizable particles for downstream processing in single-use systems},
  series = {Chemie Ingenieur Technik},
  volume    = {85},
  journal   = {Chemie Ingenieur Technik},
  number    = {1-2: Special Issue: Single-Use Technology},
  publisher = {Wiley},
  address   = {Weinheim},
  doi       = {10.1002/cite.201200130},
  pages     = {76 -- 86},
  year      = {2013},
  abstract  = {Biotechnological downstream processing is usually an elaborate procedure, requiring a multitude of unit operations to isolate the target component. Besides the disadvantageous space-time yield, the risks of cross-contaminations and product loss grow fast with the complexity of the isolation procedure. A significant reduction of unit operations can be achieved by application of magnetic particles, especially if these are functionalized with affinity ligands. As magnetic susceptible materials are highly uncommon in biotechnological processes, target binding and selective separation of such particles from fermentation or reactions broths can be done in a single step. Since the magnetizable particles can be produced from iron salts and low priced polymers, a single-use implementation of these systems is highly conceivable. In this article, the principles of magnetizable particles, their synthesis and functionalization are explained. Furthermore, applications in the area of reaction engineering, microfluidics and downstream processing are discussed focusing on established single-use technologies and development potential.},
  language  = {en}
}
@article{DeppeKlatteBongaertsetal.2011,
  author    = {Deppe, Veronika Maria and Klatte, Stephanie and Bongaerts, Johannes and Maurer, Karl-Heinz and O'Connell, Timothy and Meinhardt, Friedhelm},
  title     = {Genetic control of Amadori product degradation in Bacillus subtilis via regulation of frlBONMD expression by FrlR},
  series = {Applied and environmental microbiology},
  volume    = {Vol. 77},
  journal   = {Applied and environmental microbiology},
  number    = {No. 9},
  publisher = {American Society of Mechanical Engineers (ASME)},
  address   = {New York},
  issn      = {1098-5336 (E-Journal); 0003-6919 (Print); 0099-2240 (Print)},
  pages     = {2839 -- 2846},
  year      = {2011},
  language  = {en}
}
@article{OehlenschlaegerVolkmarStiefelmaieretal.2024,
  author    = {Oehlenschl{\"a}ger, Katharina and Volkmar, Marianne and Stiefelmaier, Judith and Langsdorf, Alexander and Holtmann, Dirk and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {New insights into the influence of pre-culture on robust solvent production of C. acetobutylicum},
  series = {Applied Microbiology and Biotechnology},
  volume    = {108},
  journal   = {Applied Microbiology and Biotechnology},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1432-0614},
  doi       = {10.1007/s00253-023-12981-8},
  pages     = {10 Seiten},
  year      = {2024},
  abstract  = {Clostridia are known for their solvent production, especially the production of butanol. Concerning the projected depletion of fossil fuels, this is of great interest. The cultivation of clostridia is known to be challenging, and it is difficult to achieve reproducible results and robust processes. However, existing publications usually concentrate on the cultivation conditions of the main culture. In this paper, the influence of cryo-conservation and pre-culture on growth and solvent production in the resulting main cultivation are examined. A protocol was developed that leads to reproducible cultivations of Clostridium acetobutylicum. Detailed investigation of the cell conservation in cryo-cultures ensured reliable cell growth in the pre-culture. Moreover, a reason for the acid crash in the main culture was found, based on the cultivation conditions of the pre-culture. The critical parameter to avoid the acid crash and accomplish the shift to the solventogenesis of clostridia is the metabolic phase in which the cells of the pre-culture were at the time of inoculation of the main culture; this depends on the cultivation time of the pre-culture. Using cells from the exponential growth phase to inoculate the main culture leads to an acid crash. To achieve the solventogenic phase with butanol production, the inoculum should consist of older cells which are in the stationary growth phase. Considering these parameters, which affect the entire cultivation process, reproducible results and reliable solvent production are ensured.},
  language  = {en}
}
@article{UlberTippkoetterBuchholzetal.2008,
  author    = {Ulber, Roland and Tippk{\"o}tter, Nils and Buchholz, H. and Demmer, W. and Scheper, T.},
  title     = {Innovative Verfahren in der Molkeaufarbeitung zur Gewinnung neuer Produkte},
  series = {Deutsche Milchwirtschaft},
  volume    = {59},
  journal   = {Deutsche Milchwirtschaft},
  number    = {19},
  issn      = {0012-0480},
  pages     = {704 -- 706},
  year      = {2008},
  language  = {de}
}
@misc{PothMonzonTippkoetteretal.2009,
  author    = {Poth, S. and Monzon, M. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Enzymatische Hydrolyse von vorbehandelter Lignocellulose},
  series = {Chemie Ingenieur Technik},
  volume    = {81},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.200950244},
  pages     = {1049},
  year      = {2009},
  abstract  = {Die {\"o}konomische Abh{\"a}ngigkeit von fossilen Brennstoffen und der klimatische Wandel durch die Nutzung dieser haben zu einer intensiven Suche nach erneuerbaren Rohstoffen f{\"u}r die Produktion von Chemikalien und Treibstoffen gef{\"u}hrt. Ein viel versprechender Rohstoff in diesem Zusammenhang sind Zucker, die mittels enzymatischer Hydrolyse aus Lignocellulose gewonnen und beispielsweise zu Ethanol umgesetzt werden k{\"o}nnen. Dabei ist es notwendig die Hydrolyse in Hinsicht auf das verwendete Substrat und die Verwendung der entstehenden Hydrolysate f{\"u}r die Fermentation von Alkohol zu optimieren. Als Substrat dienen Cellulose- und Hemicellulose-Fraktionen, die durch thermo-chemische Vorbehandlung von Holz gewonnen werden. Die Vorbehandlung erfolgt bei unserem Projektpartner am Johann Heinrich von Th{\"u}nen Institut in Hamburg. Verschiedene kommerziell erh{\"a}ltliche Enzyme, thermostabile eingeschlossen, wurden auf ihre F{\"a}higkeit hin untersucht, diese Fraktionen zu den entsprechenden Zuckern umsetzen zu k{\"o}nnen. Um die Konzentration an fermentierbaren Zuckern zu steigern werden verschiedene Optimierungen durchgef{\"u}hrt, z. B. die Erh{\"o}hung der Substrat- bzw. Enzymkonzentrationen. Ein weiterer interessanter Ansatz, welcher ebenfalls verfolgt wird, ist es die Hydrolyse und die Fermentation in einem Schritt durchzuf{\"u}hren.},
  language  = {de}
}
@incollection{FrotscherGossmannRaatschenetal.2015,
  author    = {Frotscher, Ralf and Goßmann, Matthias and Raatschen, Hans-J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Staat, Manfred},
  title     = {Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM},
  series = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  booktitle = {Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)},
  publisher = {Springer},
  address   = {Heidelberg},
  isbn      = {978-3-319-02534-6 ; 978-3-319-02535-3},
  pages     = {187 -- 212},
  year      = {2015},
  abstract  = {We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.},
  language  = {en}
}