@article{KuhnhenneRegerPyschnyetal.2020, author = {Kuhnhenne, Markus and Reger, Vitali and Pyschny, Dominik and D{\"o}ring, Bernd}, title = {Influence of airtightness of steel sandwich panel joints on heat losses}, series = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)}, volume = {172}, journal = {E3S Web of Conferences 12th Nordic Symposium on Building Physics (NSB 2020)}, number = {Art. 05008}, publisher = {EDP Sciences}, address = {Les Ulis}, doi = {10.1051/e3sconf/202017205008}, pages = {6}, year = {2020}, abstract = {Energy saving ordinances requires that buildings must be designed in such a way that the heat transfer surface including the joints is permanently air impermeable. The prefabricated roof and wall panels in lightweight steel constructions are airtight in the area of the steel covering layers. The sealing of the panel joints contributes to fulfil the comprehensive requirements for an airtight building envelope. To improve the airtightness of steel sandwich panels, additional sealing tapes can be installed in the panel joint. The influence of these sealing tapes was evaluated by measurements carried out by the RWTH Aachen University - Sustainable Metal Building Envelopes. Different installation situations were evaluated by carrying out airtightness tests for different joint distances. In addition, the influence on the heat transfer coefficient was also evaluated using the Finite Element Method (FEM). The combination of obtained air volume flow and transmission losses enables to create an "effective heat transfer coefficient" due to transmission and infiltration. This summarizes both effects in one value and is particularly helpful for approximate calculations on energy efficiency.}, language = {en} } @article{KuhnhenneDoeringKockeretal.2010, author = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Kocker, Ronald and Pyschny, Dominik and Feldmann, Markus}, title = {Die {\"O}kobilanz als Baustein der Nachhaltigkeitsbewertung im Industrie- und Gewerbebau}, series = {Stahlbau}, volume = {79}, journal = {Stahlbau}, number = {6}, publisher = {Ernst \& Sohn}, address = {Berlin}, issn = {1437-1049 (E-Journal); 0038-9145 (Print)}, doi = {10.1002/stab.201001336}, pages = {439 -- 447}, year = {2010}, abstract = {Im Herbst 2009 wurde das "Deutsche G{\"u}tesiegel Nachhaltiges Bauen" f{\"u}r die Geb{\"a}udetypen Industriebauten und Handelsbauten offiziell vorgestellt. Die {\"O}kobilanz als wichtiger Baustein der Nachhaltigkeitsbewertung wird somit auch im Industrie- und Gewerbebau zuk{\"u}nftig stark an Bedeutung gewinnen. Der vorliegende Beitrag beinhaltet einen Vergleich der Umweltleistung verschiedener Bauweisen des Industrie- und Gewerbebaus, die durch die {\"O}kobilanzierung quantifizierbar wird, anhand von momentan verf{\"u}gbaren Daten und Methoden. Es werden ausgew{\"a}hlte Ergebnisse sowie vorhandene Unsicherheiten und daraus resultierender Forschungsbedarf aufgezeigt.}, language = {de} } @article{KuhnhenneDoeringFeldmann2010, author = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Feldmann, Markus}, title = {Grunds{\"a}tze und L{\"o}sungen zur W{\"a}rmebr{\"u}ckenreduktion im Metallleichtbau}, series = {Stahlbau}, volume = {79}, journal = {Stahlbau}, number = {5}, publisher = {Ernst \& Sohn}, address = {Berlin}, issn = {1437-1049 (E-Journal); 0038-9145 (Print)}, doi = {10.1002/stab.201001330}, pages = {345 -- 355}, year = {2010}, abstract = {Die Anforderungen an das energiesparende Bauen sind mit der Einf{\"u}hrung der Energieeinsparverordnung (EnEV) 2009 auch im Industrie- und Gewerbebau deutlich versch{\"a}rft worden. Einen wesentlichen Beitrag zur Energieeinsparung liefert die Minimierung des Transmissionsw{\"a}rmetransfers. Analysiert man Geb{\"a}udeh{\"u}llen in Metallleichtbauweise stellt man fest, dass eine Erh{\"o}hung der W{\"a}rmed{\"a}mmst{\"a}rke allein noch nicht zielf{\"u}hrend ist, zus{\"a}tzlich sind W{\"a}rmebr{\"u}ckeneffekte zu ber{\"u}cksichtigen und deren Einfl{\"u}sse auf die W{\"a}rmetransmission zu reduzieren. Neben der Bedeutung f{\"u}r die Energieeinsparung ist eine w{\"a}rmetechnisch optimierte Detailausbildung auch erforderlich, um einen ausreichenden Feuchteschutz (Vermeidung von Tauwasser und Schimmelpilz) zu realisieren und so Sch{\"a}den zu vermeiden. Ein wichtiges Hilfsmittel stellt hierzu der vom Industrieverband f{\"u}r Bausysteme im Metallleichtbau (IFBS) herausgegebene W{\"a}rmebr{\"u}ckenatlas der Metall-Sandwichbauweise dar.}, language = {de} } @article{KuhlmannHunger2006, author = {Kuhlmann, Willy and Hunger, A.}, title = {Bauwirtschaft und Baurecht}, series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, journal = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {3-519-65220-X}, pages = {161 -- 270}, year = {2006}, language = {de} } @article{Kuhlmann2006, author = {Kuhlmann, Willy}, title = {Beispiel Betoninstandsetzung}, series = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].}, journal = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {978-3-8351-0002-2}, pages = {89 -- 121}, year = {2006}, language = {de} } @article{Kuhlmann2006, author = {Kuhlmann, Willy}, title = {Baustoffe}, series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, journal = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {3-519-65220-X}, pages = {51 -- 146}, year = {2006}, language = {de} } @article{Kuhlmann2006, author = {Kuhlmann, Willy}, title = {Baumaschinen - Leistungsermittlung und Bemessung}, series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, journal = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {3-519-65220-X}, pages = {581 -- 652}, year = {2006}, language = {de} } @article{Kuhlmann2006, author = {Kuhlmann, Willy}, title = {Boden, Baugrube, Verbau}, series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, journal = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {3-519-65220-X}, pages = {653 -- 708}, year = {2006}, language = {de} } @article{Kuhlmann2006, author = {Kuhlmann, Willy}, title = {Betoninstandsetzung}, series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, journal = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {3-519-65220-X}, pages = {981 -- 1017}, year = {2006}, language = {de} } @article{KuckDoering1997, author = {Kuck, Herbert and D{\"o}ring, Bernd}, title = {Regenerative Energien in Landesbauten : Land NRW unterst{\"u}tzt Einsatz erneuerbarer Energien 1997 mit 15 Mio. DM}, series = {Die Bauverwaltung mit Bauamt und Gemeindebau}, volume = {Bd. 70}, journal = {Die Bauverwaltung mit Bauamt und Gemeindebau}, number = {H. 8}, issn = {0005-6847}, pages = {384 -- 386}, year = {1997}, language = {de} } @article{KrauseKremer2006, author = {Krause, Thomas and Kremer, Norbert}, title = {Schalung und Ger{\"u}ste}, series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, journal = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {3-519-65220-X}, pages = {709 -- 747}, year = {2006}, language = {de} } @article{Krause2006, author = {Krause, Thomas}, title = {Schalung und Ger{\"u}ste}, series = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].}, journal = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {978-3-8351-0002-2}, pages = {122 -- 131}, year = {2006}, language = {de} } @article{Krause2006, author = {Krause, Thomas}, title = {Bauabrechnung und Mengenermittlung}, series = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, journal = {Zahlentafeln f{\"u}r den Baubetrieb / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.]. 7., vollst. {\"u}berarb. Aufl.}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {3-519-65220-X}, pages = {491 -- 546}, year = {2006}, language = {de} } @article{Krause2006, author = {Krause, Thomas}, title = {Bauabrechnung und Mengenermittlung}, series = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].}, journal = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].}, publisher = {Teubner}, address = {Wiesbaden}, isbn = {978-3-8351-0002-2}, pages = {49 -- 62}, year = {2006}, language = {de} } @article{KramerValeroChansonetal.2019, author = {Kramer, Matthias and Valero, Daniel and Chanson, Hubert and Bung, Daniel Bernhard}, title = {Towards reliable turbulence estimations with phase-detection probes: an adaptive window cross-correlation technique}, series = {Experiments in Fluids}, volume = {60}, journal = {Experiments in Fluids}, publisher = {Springer}, address = {Berlin}, issn = {1432-1114}, doi = {10.1007/s00348-018-2650-9}, year = {2019}, language = {en} } @article{KolymbasKirsch2009, author = {Kolymbas, Dimitrios and Kirsch, Ansgar}, title = {Zum Erddruck auf Lawinenschutzgalerien}, series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau}, volume = {Vol. 86}, journal = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau}, number = {Iss. 12}, issn = {1437-0999 (E-Journal); 0005-6820 (Print); 0932-8351 (Print)}, doi = {10.1002/bate.200910075}, pages = {774 -- 779}, year = {2009}, language = {de} } @article{KolymbasFellinKirsch2006, author = {Kolymbas, Dimitrios and Fellin, W. and Kirsch, Ansgar}, title = {Squeezing due to stress relaxation in foliated rock}, series = {International journal for numerical and analytical methods in geomechanics}, volume = {Vol. 30}, journal = {International journal for numerical and analytical methods in geomechanics}, number = {Iss. 13}, issn = {1096-9853 (E-Journal); 0363-9061 (Print)}, doi = {10.1002/nag.530}, pages = {1357 -- 1367}, year = {2006}, language = {en} } @article{KlubertMalechaSparla2018, author = {Klubert, Joachim and Malecha, Hartmut and Sparla, Peter}, title = {Modernisierung der geod{\"a}tischen Messtechnik der Urfttalsperre}, series = {Wasserwirtschaft}, volume = {108}, journal = {Wasserwirtschaft}, number = {10}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {0043-0978}, pages = {14 -- 18}, year = {2018}, language = {de} } @article{KirsteinMuellerWaleckiMingersetal.2012, author = {Kirstein, Simon and M{\"u}ller, Karsten and Walecki-Mingers, Mark and Deserno, Thomas M.}, title = {Robust adaptive flow line detection in sewer pipes}, series = {Automation in construction}, journal = {Automation in construction}, number = {21}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1872-7891 (E-Journal) ; 0926-5805 (Print)}, doi = {10.1016/j.autcon.2011.05.009}, pages = {24 -- 31}, year = {2012}, abstract = {As part of a novel approach to automatic sewer inspection, this paper presents a robust algorithm for automatic flow line detection. A large image repository is obtained from about 50,000 m sewers to represent the high variability of real world sewer systems. Automatic image processing combines Canny edge detection, Hough transform for straight lines and cost minimization using Dijkstra's shortest path algorithm. Assuming that flow lines are mostly smoothly connected horizontal structures, piecewise flow line delineation is reduced to a process of selecting adjacent line candidates. Costs are derived from the gap between adjacent candidates and their reliability. A single parameter α enables simple control of the algorithm. The detected flow line may precisely follow the segmented edges (α = 0.0) or minimize gaps at joints (α = 1.0). Both, manual and ground truth-based analysis indicate that α = 0.8 is optimal and independent of the sewer's material. The algorithm forms an essential step to further automation of sewer inspection.}, language = {en} } @article{KirschPiazzi2009, author = {Kirsch, Ansgar and Piazzi, Lukas}, title = {Numerical investigation of the effectiveness of a bored pile wall for the minimisation of settlement resulting from tunnel driving}, series = {Geomechanics and tunnelling}, volume = {Vol. 2}, journal = {Geomechanics and tunnelling}, number = {Iss. 6}, issn = {1865-7362}, doi = {10.1002/geot.200900063}, pages = {753 -- 765}, year = {2009}, language = {de} }