@article{BragardSoltauThomasetal.2010,
  author    = {Bragard, Michael and Soltau, N. and Thomas, S. and De Doncker, R. W.},
  title     = {The balance of renewable sources and user demands in grids : power electronics for modular battery energy storage systems},
  series = {IEEE transactions on power electronics},
  volume    = {25},
  journal   = {IEEE transactions on power electronics},
  number    = {12},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2010.2085455},
  pages     = {3049 -- 3056},
  year      = {2010},
  abstract  = {The continuously growing amount of renewable sources starts compromising the stability of electrical grids. Contradictory to fossil fuel power plants, energy production of wind and photovoltaic (PV) energy is fluctuating. Although predictions have significantly improved, an outage of multi-MW offshore wind farms poses a challenging problem. One solution could be the integration of storage systems in the grid. After a short overview, this paper focuses on two exemplary battery storage systems, including the required power electronics. The grid integration, as well as the optimal usage of volatile energy reserves, is presented for a 5- kW PV system for home application, as well as for a 100- MW medium-voltage system, intended for wind farm usage. The efficiency and cost of topologies are investigated as a key parameter for large-scale integration of renewable power at medium- and low-voltage.},
  language  = {en}
}
@article{BragardvanHoekDeDoncker2012,
  author    = {Bragard, Michael and van Hoek, H. and De Doncker, R. W.},
  title     = {A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance},
  series = {IEEE transactions on power electronics},
  volume    = {27},
  journal   = {IEEE transactions on power electronics},
  number    = {9},
  publisher = {IEEE},
  address   = {New York},
  issn      = {0885-8993},
  doi       = {10.1109/TPEL.2012.2189136},
  pages     = {4163 -- 4171},
  year      = {2012},
  abstract  = {This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.},
  language  = {en}
}
@article{BrueckSorgerGligorevicetal.2000,
  author    = {Br{\"u}ck, Stefan and Sorger, Ulrich and Gligorevic, Snjezana and Stolte, Norbert},
  title     = {Interleaving for outer convolutional codes in DS-CDMA systems},
  series = {IEEE transactions on communications},
  volume    = {Vol. 48},
  journal   = {IEEE transactions on communications},
  number    = {Iss. 7},
  issn      = {0090-6778},
  pages     = {1100 -- 1107},
  year      = {2000},
  language  = {en}
}
@article{ChenSchoembergKraffetal.2016,
  author    = {Chen, Bixia and Schoemberg, Tobias and Kraff, Oliver and Dammann, Philipp and Bitz, Andreas and Schlamann, Marc and Quick, Harald H. and Ladd, Mark E. and Sure, Ulrich and Wrede, Karsten H.},
  title     = {Cranial fixation plates in cerebral magnetic resonance imaging: a 3 and 7 Tesla in vivo image quality study},
  series = {Magnetic Resonance Materials in Physics, Biology and Medicine},
  volume    = {29},
  journal   = {Magnetic Resonance Materials in Physics, Biology and Medicine},
  number    = {3},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1352-8661},
  doi       = {10.1007/s10334-016-0548-1},
  pages     = {389 -- 398},
  year      = {2016},
  abstract  = {Objective This study assesses and quantifies impairment of postoperative magnetic resonance imaging (MRI) at 7 Tesla (T) after implantation of titanium cranial fixation plates (CFPs) for neurosurgical bone flap fixation. Materials and methods The study group comprised five patients who were intra-individually examined with 3 and 7 T MRI preoperatively and postoperatively (within 72 h/3 months) after implantation of CFPs. Acquired sequences included T₁-weighted magnetization-prepared rapid-acquisition gradient-echo (MPRAGE), T₂-weighted turbo-spin-echo (TSE) imaging, and susceptibility-weighted imaging (SWI). Two experienced neurosurgeons and a neuroradiologist rated image quality and the presence of artifacts in consensus reading. Results Minor artifacts occurred around the CFPs in MPRAGE and T2 TSE at both field strengths, with no significant differences between 3 and 7 T. In SWI, artifacts were accentuated in the early postoperative scans at both field strengths due to intracranial air and hemorrhagic remnants. After resorption, the brain tissue directly adjacent to skull bone could still be assessed. Image quality after 3 months was equal to the preoperative examinations at 3 and 7 T. Conclusion Image quality after CFP implantation was not significantly impaired in 7 T MRI, and artifacts were comparable to those in 3 T MRI.},
  language  = {en}
}
@article{ClaerFerreinSchiffer2019,
  author    = {Claer, Mario and Ferrein, Alexander and Schiffer, Stefan},
  title     = {Calibration of a Rotating or Revolving Platform with a LiDAR Sensor},
  series = {Applied Sciences},
  volume    = {Volume 9},
  journal   = {Applied Sciences},
  number    = {issue 11, 2238},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2076-3417},
  doi       = {10.3390/app9112238},
  pages     = {18 Seiten},
  year      = {2019},
  language  = {en}
}
@article{ClaessensFuchsbergerGuentheretal.2003,
  author    = {Claessens, J. and Fuchsberger, A. and G{\"u}nther, C. and Horn, G. and Howker, K. and Hulsebosch, R.J. and Mitchell, C. and Paterson, K. and Preneel, B. and Schellekens, D. and Schuba, Marko},
  title     = {Pioneering Advanced Mobile Privacy and Security},
  pages     = {1 -- 17},
  year      = {2003},
  language  = {en}
}
@article{CollPeralesSchulteTiggesRondinoneetal.2022,
  author    = {Coll-Perales, Baldomero and Schulte-Tigges, Joschua and Rondinone, Michele and Gozalvez, Javier and Reke, Michael and Matheis, Dominik and Walter, Thomas},
  title     = {Prototyping and evaluation of infrastructure-assisted transition of control for cooperative automated vehicles},
  series = {IEEE Transactions on Intelligent Transportation Systems},
  volume    = {23},
  journal   = {IEEE Transactions on Intelligent Transportation Systems},
  number    = {7},
  publisher = {IEEE},
  issn      = {1524-9050 (Print)},
  doi       = {10.1109/TITS.2021.3061085},
  pages     = {6720 -- 6736},
  year      = {2022},
  abstract  = {Automated driving is now possible in diverse road and traffic conditions. However, there are still situations that automated vehicles cannot handle safely and efficiently. In this case, a Transition of Control (ToC) is necessary so that the driver takes control of the driving. Executing a ToC requires the driver to get full situation awareness of the driving environment. If the driver fails to get back the control in a limited time, a Minimum Risk Maneuver (MRM) is executed to bring the vehicle into a safe state (e.g., decelerating to full stop). The execution of ToCs requires some time and can cause traffic disruption and safety risks that increase if several vehicles execute ToCs/MRMs at similar times and in the same area. This study proposes to use novel C-ITS traffic management measures where the infrastructure exploits V2X communications to assist Connected and Automated Vehicles (CAVs) in the execution of ToCs. The infrastructure can suggest a spatial distribution of ToCs, and inform vehicles of the locations where they could execute a safe stop in case of MRM. This paper reports the first field operational tests that validate the feasibility and quantify the benefits of the proposed infrastructure-assisted ToC and MRM management. The paper also presents the CAV and roadside infrastructure prototypes implemented and used in the trials. The conducted field trials demonstrate that infrastructure-assisted traffic management solutions can reduce safety risks and traffic disruptions.},
  language  = {en}
}
@article{Czarnecki2015,
  author    = {Czarnecki, Christian},
  title     = {Moderne Telekommunikationsprodukte erfordern standardisierte Gesch{\"a}ftsprozesse},
  series = {Wirtschaft und Wissenschaft},
  journal   = {Wirtschaft und Wissenschaft},
  number    = {2},
  publisher = {Deutsche Telekom AG. Fachhochschule Leipzig},
  address   = {Leipzig},
  pages     = {7 -- 7},
  year      = {2015},
  language  = {de}
}
@article{CzarneckiBensbergAuth2019,
  author    = {Czarnecki, Christian and Bensberg, Frank and Auth, Gunnar},
  title     = {Die Rolle von Softwarerobotern f{\"u}r die zuk{\"u}nftige Arbeitswelt},
  series = {HMD Praxis der Wirtschaftsinformatik},
  volume    = {56},
  journal   = {HMD Praxis der Wirtschaftsinformatik},
  number    = {4},
  publisher = {Springer},
  address   = {Cham},
  issn      = {2198-2775},
  doi       = {10.1365/s40702-019-00548-z},
  pages     = {795 -- 808},
  year      = {2019},
  abstract  = {Im Rahmen der Digitalisierung ist die zunehmende Automatisierung von bisher manuellen Prozessschritten ein Aspekt, der massive Auswirkungen auf die zuk{\"u}nftige Arbeitswelt haben wird. In diesem Kontext werden an den Einsatz von Softwarerobotern zur Prozessautomatisierung hohe Erwartungen gekn{\"u}pft. Bei den Implementierungsans{\"a}tzen wird die Diskussion aktuell insbesondere durch Robotic Process Automation (RPA) und Chatbots gepr{\"a}gt. Beide Ans{\"a}tze verfolgen das gemeinsame Ziel einer 1:1-Automatisierung von menschlichen Handlungen und dadurch ein direktes Ersetzen von Mitarbeitern durch Maschinen. Bei RPA werden Prozesse durch Softwareroboter erlernt und automatisiert ausgef{\"u}hrt. Dabei emulieren RPA-Roboter die Eingaben auf der bestehenden Pr{\"a}sentationsschicht, so dass keine {\"A}nderungen an vorhandenen Anwendungssystemen notwendig sind. Am Markt werden bereits unterschiedliche RPA-L{\"o}sungen als Softwareprodukte angeboten. Durch Chatbots werden Ein- und Ausgaben von Anwendungssystemen {\"u}ber nat{\"u}rliche Sprache realisiert. Dadurch ist die Automatisierung von unternehmensexterner Kommunikation (z. B. mit Kunden) aber auch von unternehmensinternen Assistenzt{\"a}tigkeiten m{\"o}glich. Der Beitrag diskutiert die Auswirkungen von Softwarerobotern auf die Arbeitswelt anhand von Anwendungsbeispielen und erl{\"a}utert die unternehmensindividuelle Entscheidung {\"u}ber den Einsatz von Softwarerobotern anhand von Effektivit{\"a}ts- und Effizienzzielen.},
  language  = {de}
}
@article{CzarneckiDietze2020,
  author    = {Czarnecki, Christian and Dietze, Christian},
  title     = {Gestaltungsorientierte Forschung am Beispiel der Referenzmodellierung in der Telekommunikationsindustrie},
  series = {HMD Praxis der Wirtschaftsinformatik},
  volume    = {57},
  journal   = {HMD Praxis der Wirtschaftsinformatik},
  number    = {2},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {2198-2775},
  doi       = {10.1365/s40702-020-00594-y},
  pages     = {310 -- 323},
  year      = {2020},
  abstract  = {Am Beispiel der Telekommunikationsindustrie zeigt der Beitrag eine konkrete Ausgestaltung anwendungsorientierter Forschung, die sowohl f{\"u}r die Praxis als auch f{\"u}r die Wissenschaft nutzen- und erkenntnisbringend ist. Forschungsgegenstand sind die Referenzmodelle des Industriegremiums TM Forum, die von vielen Telekommunikationsunternehmen zur Transformation ihrer Strukturen und Systeme genutzt werden. Es wird die langj{\"a}hrige Forschungst{\"a}tigkeit bei der Weiterentwicklung und Anwendung dieser Referenzmodelle beschrieben. Dabei wird ein konsequent gestaltungsorientierter Forschungsansatz verfolgt. Das Zusammenspiel aus kontinuierlicher Weiterentwicklung in Zusammenarbeit mit einem Industriegremium und der Anwendung in vielf{\"a}ltigen Praxisprojekten f{\"u}hrt zu einer erfolgreichen Symbiose aus praktischer Nutzengenerierung sowie wissenschaftlichem Erkenntnisgewinn. Der Beitrag stellt den gew{\"a}hlten Forschungsansatz anhand konkreter Beispiele vor. Darauf basierend werden Empfehlungen und Herausforderungen f{\"u}r eine gestaltungs- und praxisorientierte Forschung diskutiert.},
  language  = {de}
}
@article{CzarneckiGeierPflug2017,
  author    = {Czarnecki, Christian and Geier, Jari and Pflug, Karolin},
  title     = {Netzvirtualisierung durch SDN und NFV : Unternehmensprozesse auf dem Pr{\"u}fstand},
  series = {LANline},
  journal   = {LANline},
  publisher = {AWI Aktuelles Wissen Verl.-Ges.},
  address   = {Trostberg},
  issn      = {0942-4172},
  year      = {2017},
  abstract  = {Kundenanforderungen an Netzwerke haben sich in den vergangenen Jahren stark ver{\"a}ndert. Mit NFV und SDN sind Unternehmen technisch in der Lage, diesen gerecht zu werden. Die Provider stehen jedoch vor großen Herausforderungen: Insbesondere Produkte und Prozesse m{\"u}ssen angepasst und agiler werden, um die St{\"a}rken von NFV und SDN zum Kundenvorteil auszuspielen.},
  language  = {de}
}
@article{CzarneckiHeuserKraemeretal.2006,
  author    = {Czarnecki, Christian and Heuser, Marcus and Kr{\"a}mer, Christian and Stummer, Christoph and Theisinger, Felix and Wettklo, Michael},
  title     = {How to get more customer satisfaction : Erfolg im Wettbewerb durch kundenzentrierte Prozesse},
  series = {Detecon Management Report},
  journal   = {Detecon Management Report},
  number    = {3},
  publisher = {Detecon Internat. GmbH},
  address   = {Eschborn},
  issn      = {1867-3147},
  pages     = {29 -- 33},
  year      = {2006},
  abstract  = {Unternehmen sind in der Regel {\"u}berzeugt, dass sie die Bed{\"u}rfnisse ihrer Kunden in den Mittelpunkt stellen. Aber in der direkten Interaktion mit dem Kunden zeigen sie h{\"a}ufig Schw{\"a}chen. Der folgende Beitrag illustriert, wie durch eine konsequente Ausrichtung der Wertsch{\"o}pfungsprozesse auf die zentralen Kundenbed{\"u}rfnisse ein Dreifacheffekt erzielt werden kann: Nachhaltig erh{\"o}hte Kundenzufriedenheit, gesteigerte Effizienz und eine Differenzierung im Wettbewerb.},
  language  = {de}
}
@article{CzarneckiSpiliopoulou2012,
  author    = {Czarnecki, Christian and Spiliopoulou, Myra},
  title     = {A holistic framework for the implementation of a next generation network},
  series = {International Journal of Business Information Systems},
  volume    = {9},
  journal   = {International Journal of Business Information Systems},
  number    = {4},
  publisher = {Inderscience Enterprises},
  address   = {Olney, Bucks},
  issn      = {1746-0972},
  doi       = {10.1504/IJBIS.2012.046291},
  pages     = {385 -- 401},
  year      = {2012},
  abstract  = {As the potential of a next generation network (NGN) is recognised, telecommunication companies consider switching to it. Although the implementation of an NGN seems to be merely a modification of the network infrastructure, it may trigger or require changes in the whole company, because it builds upon the separation between service and transport, a flexible bundling of services to products and the streamlining of the IT infrastructure. We propose a holistic framework, structured into the layers 'strategy', 'processes' and 'information systems' and incorporate into each layer all concepts necessary for the implementation of an NGN, as well as the alignment of these concepts. As a first proof-of-concept for our framework we have performed a case study on the introduction of NGN in a large telecommunication company; we show that our framework captures all topics that are affected by an NGN implementation.},
  language  = {en}
}
@article{CzarneckiWinkelmannSpiliopoulou2013,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Referenzprozessabl{\"a}ufe f{\"u}r Telekommunikationsunternehmen: Eine Erweiterung des eTOM-Modells},
  series = {Wirtschaftsinformatik},
  volume    = {55},
  journal   = {Wirtschaftsinformatik},
  number    = {2},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  issn      = {1861-8936},
  doi       = {10.1007/s11576-013-0351-9},
  pages     = {83 -- 97},
  year      = {2013},
  abstract  = {Der Telekommunikationsmarkt erf{\"a}hrt substanzielle Ver{\"a}nderungen. Neue Gesch{\"a}ftsmodelle, innovative Dienstleistungen und Technologien erfordern Reengineering, Transformation und Prozessstandardisierung. Mit der Enhanced Telecom Operation Map (eTOM) bietet das TM Forum ein international anerkanntes de facto Referenz-Prozess-Framework basierend auf spezifischen Anforderungen und Auspr{\"a}gungen der Telekommunikationsindustrie an. Allerdings enth{\"a}lt dieses Referenz-Framework nur eine hierarchische Sammlung von Prozessen auf unterschiedlichen Abstraktionsebenen. Eine Kontrollsicht verstanden als sequenzielle Anordnung von Aktivit{\"a}ten und daraus resultierend ein realer Prozessablauf fehlt ebenso wie eine Ende-zu-Ende-Sicht auf den Kunden. In diesem Artikel erweitern wir das eTOM-Referenzmodell durch Referenzprozessabl{\"a}ufe, in welchen wir das Wissen {\"u}ber Prozesse in Telekommunikationsunternehmen abstrahieren und generalisieren. Durch die Referenzprozessabl{\"a}ufe werden Unternehmen bei dem strukturierten und transparenten (Re-)Design ihrer Prozesse unterst{\"u}tzt. Wir demonstrieren die Anwendbarkeit und N{\"u}tzlichkeit unserer Referenzprozessabl{\"a}ufe in zwei Fallstudien und evaluieren diese anhand von Kriterien f{\"u}r die Bewertung von Referenzmodellen. Die Referenzprozessabl{\"a}ufe wurden vom TM Forum in den Standard aufgenommen und als Teil von eTOM Version 9 ver{\"o}ffentlicht. Dar{\"u}ber hinaus diskutieren wir die Komponenten unseres Ansatzes, die auch außerhalb der Telekommunikationsindustrie angewandt werden k{\"o}nnen.},
  language  = {de}
}
@article{CzarneckiWinkelmannSpiliopoulou2010,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Services in electronic telecommunication markets: a framework for planning the virtualization of processes},
  series = {Electronic Markets},
  volume    = {20},
  journal   = {Electronic Markets},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1422-8890},
  doi       = {10.1007/s12525-010-0045-8},
  pages     = {197 -- 207},
  year      = {2010},
  abstract  = {The potential of electronic markets in enabling innovative product bundles through flexible and sustainable partnerships is not yet fully exploited in the telecommunication industry. One reason is that bundling requires seamless de-assembling and re-assembling of business processes, whilst processes in telecommunication companies are often product-dependent and hard to virtualize. We propose a framework for the planning of the virtualization of processes, intended to assist the decision maker in prioritizing the processes to be virtualized: (a) we transfer the virtualization pre-requisites stated by the Process Virtualization Theory in the context of customer-oriented processes in the telecommunication industry and assess their importance in this context, (b) we derive IT-oriented requirements for the removal of virtualization barriers and highlight their demand on changes at different levels of the organization. We present a first evaluation of our approach in a case study and report on lessons learned and further steps to be performed.},
  language  = {en}
}
@article{DesernoAachAmuntsetal.2011,
  author    = {Deserno, Thomas M. and Aach, Til and Amunts, Katrin and Hillen, Walter and Kuhlen, Torsten and Scholl, Ingrid},
  title     = {Advances in medical image processing : A special Issue on the Workshop in Aachen, Germany, March 2010},
  series = {Computer Science - Research and Development. 26 (2011), H. 1-2},
  journal   = {Computer Science - Research and Development. 26 (2011), H. 1-2},
  publisher = {springer},
  address   = {Berlin},
  isbn      = {1865-2042},
  pages     = {1 -- 3},
  year      = {2011},
  language  = {en}
}
@article{DieringerRenzLindeletal.2011,
  author    = {Dieringer, Matthias A. and Renz, Wolfgang and Lindel, Tomasz D. and Seifert, Frank and Frauenrath, Tobias and von Knobelsdorf-Brenkenhoff, Florian and Waiczies, Helmar and Hoffmann, Werner and Rieger, Jan and Pfeiffer, Harald and Ittermann, Bernd and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Design and application of a four-channel transmit/receive surface coil for functional cardiac imaging at 7T},
  series = {Journal of Magnetic Resonance Imaging},
  volume    = {33},
  journal   = {Journal of Magnetic Resonance Imaging},
  number    = {3},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2586},
  doi       = {10.1002/jmri.22451},
  pages     = {736 -- 741},
  year      = {2011},
  abstract  = {Purpose To design and evaluate a four-channel cardiac transceiver coil array for functional cardiac imaging at 7T. Materials and Methods A four-element cardiac transceiver surface coil array was developed with two rectangular loops mounted on an anterior former and two rectangular loops on a posterior former. specific absorption rate (SAR) simulations were performed and a Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-1 calibration method was applied prior to obtain 2D FLASH CINE (mSENSE, R = 2) images from nine healthy volunteers with a spatial resolution of up to 1 × 1 × 2.5 mm3. Results Tuning and matching was found to be better than 10 dB for all subjects. The decoupling (S21) was measured to be >18 dB between neighboring loops, >20 dB for opposite loops, and >30 dB for other loop combinations. SAR values were well within the limits provided by the IEC. Imaging provided clinically acceptable signal homogeneity with an excellent blood-myocardium contrast applying the Burn:x-wiley:10531807:media:JMRI22451:tex2gif-stack-2 calibration approach. Conclusion A four-channel cardiac transceiver coil array for 7T was built, allowing for cardiac imaging with clinically acceptable signal homogeneity and an excellent blood-myocardium contrast. Minor anatomic structures, such as pericardium, mitral, and tricuspid valves and their apparatus, as well as trabeculae, were accurately delineated.},
  language  = {en}
}
@article{DroopChenRadfordetal.2023,
  author    = {Droop, Philipp and Chen, Shaohuang and Radford, Melissa J. and Paulßen, Elisabeth and Gates, Byron D. and Reilly, Raymond M. and Radchenko, Valery and Hoehr, Cornelia},
  title     = {Synthesis of 197m/gHg labelled gold nanoparticles for targeted radionuclide therapy},
  series = {Radiochimica Acta},
  volume    = {111},
  journal   = {Radiochimica Acta},
  number    = {10},
  publisher = {De Gruyter},
  address   = {Berlin [u.a.]},
  issn      = {2193-3405},
  doi       = {10.1515/ract-2023-0144},
  pages     = {773 -- 779},
  year      = {2023},
  abstract  = {Meitner-Auger-electron emitters have a promising potential for targeted radionuclide therapy of cancer because of their short range and the high linear energy transfer of Meitner-Auger-electrons (MAE). One promising MAE candidate is 197m/gHg with its half-life of 23.8 h and 64.1 h, respectively, and high MAE yield. Gold nanoparticles (AuNPs) that are labelled with 197m/gHg could be a helpful tool for radiation treatment of glioblastoma multiforme when infused into the surgical cavity after resection to prevent recurrence. To produce such AuNPs, 197m/gHg was embedded into pristine AuNPs. Two different syntheses were tested starting from irradiated gold containing trace amounts of 197m/gHg. When sodium citrate was used as reducing agent, no 197m/gHg labelled AuNPs were formed, but with tannic acid, 197m/gHg labeled AuNPs were produced. The method was optimized by neutralizing the pH (pH = 7) of the Au/197m/gHg solution, which led to labelled AuNPs with a size of 12.3 ± 2.0 nm as measured by transmission electron microscopy. The labelled AuNPs had a concentration of 50 μg (gold)/mL with an activity of 151 ± 93 kBq/mL (197gHg, time corrected to the end of bombardment).},
  language  = {en}
}
@article{ElQuardiStreckertBitzetal.2011,
  author    = {El Quardi, A. and Streckert, J. and Bitz, Andreas and M{\"u}nkner, S. and Engel, J. and Hansen, V.},
  title     = {New fin-line devices for radiofrequency exposure of small biological samples in vitro allowing whole-cell patch clamp recordings},
  series = {Bioelectromagnetics},
  volume    = {32},
  journal   = {Bioelectromagnetics},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1521-186X},
  doi       = {10.1002/bem.20621},
  pages     = {102 -- 112},
  year      = {2011},
  abstract  = {The development and analysis of three waveguides for the exposure of small biological in vitro samples to mobile communication signals at 900 MHz (GSM, Global System for Mobile Communications), 1.8 GHz (GSM), and 2 GHz (UMTS, Universal Mobile Telecommunications System) is presented. The waveguides were based on a fin-line concept and the chamber containing the samples bathed in extracellular solution was placed onto two fins with a slot in between, where the exposure field concentrates. Measures were taken to allow for patch clamp recordings during radiofrequency (RF) exposure. The necessary power for the achievement of the maximum desired specific absorption rate (SAR) of 20 W/kg (average over the mass of the solution) was approximately Pin = 50 mW, Pin = 19 mW, and Pin = 18 mW for the 900 MHz, 1800 MHz, and 2 GHz devices, respectively. At 20 W/kg, a slight RF-induced temperature elevation in the solution of no more than 0.3 °C was detected, while no thermal offsets due to the electromagnetic exposure could be detected at the lower SAR settings (2, 0.2, and 0.02 W/kg). A deviation of 10\% from the intended solution volume yielded a calculated SAR deviation of 8\% from the desired value. A maximum ±10\% variation in the local SAR could occur when the position of the patch clamp electrode was altered within the area where the cells to be investigated were located.},
  language  = {en}
}
@article{EllerwegRitzSchuhmann2009,
  author    = {Ellerweg, Roland and Ritz, Thomas and Schuhmann, Stefan},
  title     = {Anwendungsentwicklung f{\"u}r iPhone und Windows Mobile : ein bisschen von allem},
  series = {iX : Magazin f{\"u}r professionelle Informationstechnik},
  journal   = {iX : Magazin f{\"u}r professionelle Informationstechnik},
  number    = {3},
  issn      = {0935-9680 (Print)},
  pages     = {132 -- 135},
  year      = {2009},
  language  = {de}
}