@incollection{BraunBouckeBallmann2005,
  author    = {Braun, Carsten and Boucke, Alexander and Ballmann, Josef},
  title     = {Numerical study of the influence of dynamic pressure and deflected ailerons on the deformation of a high speed wing model},
  series = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  booktitle = {High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 / Eds.: Egon Krause ...},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-22943-4},
  pages     = {225 -- 236},
  year      = {2005},
  language  = {en}
}
@incollection{MertensBecker1989,
  author    = {Mertens, Josef and Becker, K.},
  title     = {Numerical solution of flow equations : an aircraft designer's view},
  series = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  booktitle = {Nonlinear hyperbolic equations - theory, computation methods, and applications : proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen, FRG, March 14 to 18, 1988. - (Notes on Numerical Fluid Mechanics ; 24)},
  editor    = {Ballmann, Josef},
  publisher = {Vieweg},
  address   = {Braunschweig},
  isbn      = {3-528-08098-1},
  doi       = {10.1007/978-3-322-87869-4_41},
  pages     = {403 -- 412},
  year      = {1989},
  abstract  = {Today the most accurate and cost effective industrial codes used in aircraft design are based on the full potential equation coupled with boundary layer equations. However, these are not capable to solve complicated three-dimensional problems of vortical flows and shocks. On the other hand Euler and Navier-Stokes codes are too expensive and not accurate enough for design purposes, especially in regard of drag and interference prediction. The reasons for these deficiencies are investigated and a way to overcome them by future developments is demonstrated.},
  language  = {en}
}
@incollection{MeskourisButenwegKalkeretal.2007,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Kalker, Ines and Mistler, Michael},
  title     = {Numerical simulation of historic masonry buildings},
  series = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)},
  booktitle = {Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in arch{\"a}ologischer, historischer und seismologischer Sicht ; Beitr{\"a}ge des Interdisziplin{\"a}ren Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)},
  publisher = {Franz Steiner Verlag},
  address   = {Stuttgart},
  isbn      = {978-3-515-09030-8 ; 3-515-09030-4},
  pages     = {171 -- 189},
  year      = {2007},
  language  = {en}
}
@incollection{Kleefeld2020,
  author    = {Kleefeld, Andreas},
  title     = {Numerical calculation of interior transmission eigenvalues with mixed boundary conditions},
  series = {Computational and Analytic Methods in Science and Engineering},
  booktitle = {Computational and Analytic Methods in Science and Engineering},
  editor    = {Constanda, Christian},
  publisher = {Birkh{\"a}user},
  address   = {Cham},
  isbn      = {978-3-030-48185-8 (Hardcover)},
  doi       = {10.1007/978-3-030-48186-5_9},
  pages     = {173 -- 195},
  year      = {2020},
  abstract  = {Interior transmission eigenvalue problems for the Helmholtz equation play an important role in inverse wave scattering. Some distribution properties of those eigenvalues in the complex plane are reviewed. Further, a new scattering model for the interior transmission eigenvalue problem with mixed boundary conditions is described and an efficient algorithm for computing the interior transmission eigenvalues is proposed. Finally, extensive numerical results for a variety of two-dimensional scatterers are presented to show the validity of the proposed scheme.},
  language  = {en}
}
@incollection{AbeleKleefeld2020,
  author    = {Abele, Daniel and Kleefeld, Andreas},
  title     = {New Numerical Results for the Optimization of Neumann Eigenvalues},
  series = {Computational and Analytic Methods in Science and Engineering},
  booktitle = {Computational and Analytic Methods in Science and Engineering},
  editor    = {Constanda, Christian},
  publisher = {Birkh{\"a}user},
  address   = {Cham},
  isbn      = {978-3-030-48185-8 (Print)},
  doi       = {10.1007/978-3-030-48186-5_1},
  pages     = {1 -- 20},
  year      = {2020},
  abstract  = {We present new numerical results for shape optimization problems of interior Neumann eigenvalues. This field is not well understood from a theoretical standpoint. The existence of shape maximizers is not proven beyond the first two eigenvalues, so we study the problem numerically. We describe a method to compute the eigenvalues for a given shape that combines the boundary element method with an algorithm for nonlinear eigenvalues. As numerical optimization requires many such evaluations, we put a focus on the efficiency of the method and the implemented routine. The method is well suited for parallelization. Using the resulting fast routines and a specialized parametrization of the shapes, we found improved maxima for several eigenvalues.},
  language  = {en}
}
@incollection{PoghossianWeilandSchoening2014,
  author    = {Poghossian, Arshak and Weiland, Maryam and Sch{\"o}ning, Michael Josef},
  title     = {Nanoplate field-effect capacitors: a new transducer structure for multiparameter (bio-)chemical sensing},
  series = {Multisensor system for chemical analysis : materials and sensors},
  booktitle = {Multisensor system for chemical analysis : materials and sensors},
  editor    = {Lvova, Larisa and Kirsanov, Dmitry and di Natale, Corrado and Legin, Audrey},
  edition   = {1},
  publisher = {Jenny Stanford Publishing},
  address   = {Singapore},
  isbn      = {978-981-4411-15-8 ; 978-981-4411-16-5},
  doi       = {10.1201/b15491-11},
  pages     = {333 -- 373},
  year      = {2014},
  abstract  = {An array of electrically isolated nanoplate field-effect silicon-on-insulator (SOI) capacitors as a new transducer structure for multiparameter (bio-)chemical sensing is presented. The proposed approach allows addressable biasing and electrical readout of multiple nanoplate field-effect capacitive (bio-)chemical sensors on the same SOI chip, as well as differential-mode measurements. The realized sensor chip has been applied for pH and penicillin concentration measurements, electrical monitoring of polyelectrolyte multilayer formation, and the label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization and denaturation events.},
  language  = {en}
}
@incollection{PoghossianSchoening2017,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Nanomaterial-Modified Capacitive Field-Effect Biosensors},
  series = {Springer Series on Chemical Sensors and Biosensors (Methods and Applications)},
  booktitle = {Springer Series on Chemical Sensors and Biosensors (Methods and Applications)},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  doi       = {10.1007/5346_2017_2},
  pages     = {1 -- 25},
  year      = {2017},
  abstract  = {The coupling of charged molecules, nanoparticles, and more generally, inorganic/organic nanohybrids with semiconductor field-effect devices based on an electrolyte-insulator-semiconductor (EIS) system represents a very promising strategy for the active tuning of electrochemical properties of these devices and, thus, opening new opportunities for label-free biosensing by the intrinsic charge of molecules. The simplest field-effect sensor is a capacitive EIS sensor, which represents a (bio-)chemically sensitive capacitor. In this chapter, selected examples of recent developments in the field of label-free biosensing using nanomaterial-modified capacitive EIS sensors are summarized. In the first part, we present applications of EIS sensors modified with negatively charged gold nanoparticles for the label-free electrostatic detection of positively charged small proteins and macromolecules, for monitoring the layer-by-layer formation of oppositely charged polyelectrolyte (PE) multilayers as well as for the development of an enzyme-based biomolecular logic gate. In the second part, examples of a label-free detection by means of EIS sensors modified with a positively charged weak PE layer are demonstrated. These include electrical detection of on-chip and in-solution hybridized DNA (deoxyribonucleic acid) as well as an EIS sensor with pH-responsive weak PE/enzyme multilayers for enhanced field-effect biosensing.},
  language  = {en}
}
@incollection{KrollLudwigs2017,
  author    = {Kroll-Ludwigs, Kathrin},
  title     = {Names of individuals},
  series = {European Encyclopedia of Private International Law},
  booktitle = {European Encyclopedia of Private International Law},
  publisher = {Edward Elgar Publishing},
  address   = {Cheltenham, UK},
  isbn      = {9781782547228},
  year      = {2017},
  language  = {en}
}
@incollection{MuellerVeggianKopsQuinetal.2007,
  author    = {M{\"u}ller-Veggian, Mattea and Kops, Elena Rota and Quin, Peng and Herzog, Hans},
  title     = {MRI Based Attenuation Correction for Brain PET Images},
  series = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  booktitle = {Advances in medical engineering / [3rd RPT - Remagener Physiktage together with the Second Scientific Workshop of Medical Robotics, Navigation and Visualization ... Remagen ... 7.-9. M{\"a}rz 2007]. Thorsten M. Buzug (ed.) Part 1.},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-540-68763-4},
  doi       = {10.1007/978-3-540-68764-1_15},
  pages     = {93 -- 97},
  year      = {2007},
  abstract  = {This work describes a procedure to yield attenuation maps from MR images which are used for the absorption correction (AC) of brain PET data. Such an approach could be mandatory for future combined PET and MRI scanners, which probably do not include a transmission facility. T1-weighted MR images were segmented into brain tissue, bone, soft tissue, and sinus; attenuation coefficients corresponding to elemental composition and density as well as to 511 keV photon energy were respectively assigned. Attenuation maps containing up to four compartments were created and forward projected into sinograms with attenuation factors which then were used for AC during reconstruction of FDG-PET data. The commonly used AC based on a radioactive (68Ge) transmission scan served as reference. The reconstructed radioactivity values obtained with the MRI-based AC were about 20\% lower than those obtained with PET-based AC if the skull was not taken into account. Considering the skull the difference was still about 10\%. Our investigations demonstrate the feasibility of a MRI-based AC, but revealed also the necessity of a satisfying delineation of bone thickness which tends to be underestimated in our first approach of T1-weighted MR image segmentation.},
  language  = {en}
}
@incollection{RebelHueningScholletal.2015,
  author    = {Rebel, S{\"o}ren and H{\"u}ning, Felix and Scholl, Ingrid and Ferrein, Alexander},
  title     = {MQOne: Low-cost design for a rugged-terrain robot platform},
  series = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  booktitle = {Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book)},
  doi       = {10.1007/978-3-319-22876-1_19},
  pages     = {209 -- 221},
  year      = {2015},
  abstract  = {Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price.},
  language  = {en}
}
@incollection{MedlinBarkerBaumannetal.1994,
  author    = {Medlin, L. K. and Barker, G. L. A. and Baumann, Marcus and Hayes, P. K.},
  title     = {Molecular biology and systematics},
  series = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  booktitle = {The Haptophyte Algae (Special volume / Systematics Association : 51)},
  publisher = {Clarendon Press},
  address   = {Oxford},
  isbn      = {0-19-857772-9},
  pages     = {393 -- 411},
  year      = {1994},
  language  = {en}
}
@incollection{FunkeBoernerHendricketal.2011,
  author    = {Funke, Harald and B{\"o}rner, Sebastian and Hendrick, P. and Recker, E.},
  title     = {Modification and testing of an engine and fuel control system for a hydrogen fuelled gas turbine},
  series = {Progress in Propulsion Physics. Vol. 2},
  booktitle = {Progress in Propulsion Physics. Vol. 2},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  isbn      = {978-2-7598-0673-7},
  pages     = {475 -- 486},
  year      = {2011},
  language  = {en}
}
@incollection{HeuermannFinger2014,
  author    = {Heuermann, Holger and Finger, Torsten},
  title     = {Microwave Spark Plug for Very High-Pressure Conditions},
  series = {Ignition systems for gasoline engines},
  booktitle = {Ignition systems for gasoline engines},
  editor    = {G{\"u}nther, Michael},
  publisher = {DCM Druck},
  address   = {Meckenheim},
  pages     = {269 -- 282},
  year      = {2014},
  language  = {en}
}
@incollection{DigelAkimbekovKistaubayevaetal.2018,
  author    = {Digel, Ilya and Akimbekov, Nuraly S. and Kistaubayeva, Aida and Zhubanova, Azhar A.},
  title     = {Microbial Sampling from Dry Surfaces: Current Challenges and Solutions},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_19},
  pages     = {421 -- 456},
  year      = {2018},
  abstract  = {Sampling of dry surfaces for microorganisms is a main component of microbiological safety and is of critical importance in many fields including epidemiology, astrobiology as well as numerous branches of medical and food manufacturing. Aspects of biofilm formation, analysis and removal in aqueous solutions have been thoroughly discussed in literature. In contrast, microbial communities on air-exposed (dry) surfaces have received significantly less attention. Diverse surface sampling methods have been developed in order to address various surfaces and microbial groups, but they notoriously show poor repeatability, low recovery rates and suffer from lack of mutual consistency. Quantitative sampling for viable microorganisms represents a particular challenge, especially on porous and irregular surfaces. Therefore, it is essential to examine in depth the factors involved in microorganisms' recovery efficiency and accuracy depending on the sampling technique used. Microbial colonization, retention and community composition on different dry surfaces are very complex and rely on numerous physicochemical and biological factors. This study is devoted to analyze and review the (a) physical phenomena and intermolecular forces relevant for microbiological surface sampling; (b) challenges and problems faced by existing sampling methods for viable microorganisms and (c) current directions of engineering and research aimed at improvement of quality and efficiency of microbiological surface sampling.},
  language  = {en}
}
@incollection{BhattaraiStaat2018,
  author    = {Bhattarai, Aroj and Staat, Manfred},
  title     = {Mechanics of soft tissue reactions to textile mesh implants},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_11},
  pages     = {251 -- 275},
  year      = {2018},
  abstract  = {For pelvic floor disorders that cannot be treated with non-surgical procedures, minimally invasive surgery has become a more frequent and safer repair procedure. More than 20 million prosthetic meshes are implanted each year worldwide. The simple selection of a single synthetic mesh construction for any level and type of pelvic floor dysfunctions without adopting the design to specific requirements increase the risks for mesh related complications. Adverse events are closely related to chronic foreign body reaction, with enhanced formation of scar tissue around the surgical meshes, manifested as pain, mesh erosion in adjacent structures (with organ tissue cut), mesh shrinkage, mesh rejection and eventually recurrence. Such events, especially scar formation depend on effective porosity of the mesh, which decreases discontinuously at a critical stretch when pore areas decrease making the surgical reconstruction ineffective that further augments the re-operation costs. The extent of fibrotic reaction is increased with higher amount of foreign body material, larger surface, small pore size or with inadequate textile elasticity. Standardized studies of different meshes are essential to evaluate influencing factors for the failure and success of the reconstruction. Measurements of elasticity and tensile strength have to consider the mesh anisotropy as result of the textile structure. An appropriate mesh then should show some integration with limited scar reaction and preserved pores that are filled with local fat tissue. This chapter reviews various tissue reactions to different monofilament mesh implants that are used for incontinence and hernia repairs and study their mechanical behavior. This helps to predict the functional and biological outcomes after tissue reinforcement with meshes and permits further optimization of the meshes for the specific indications to improve the success of the surgical treatment.},
  language  = {en}
}
@incollection{MatchaBarczik2011,
  author    = {Matcha, Heike and Barczik, G{\"u}nter},
  title     = {Mass Diversity: Individualized housing via parametric typology},
  series = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  booktitle = {Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism},
  editor    = {Valena, Tomas and Avermaete, Tom and Vrachliotis, Georg},
  publisher = {Edition Axel Menges},
  address   = {Fellbach},
  isbn      = {978-3-936681-47-5},
  pages     = {354 -- 358},
  year      = {2011},
  language  = {en}
}
@incollection{EngelmannShashaSlabu2021,
  author    = {Engelmann, Ulrich M. and Shasha, Carolyn and Slabu, Ioana},
  title     = {Magnetic nanoparticle relaxation in biomedical application: focus on simulating nanoparticle heating},
  series = {Magnetic nanoparticles in human health and medicine},
  booktitle = {Magnetic nanoparticles in human health and medicine},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken, New Jeersey},
  isbn      = {978-1-119-75467-1},
  pages     = {327 -- 354},
  year      = {2021},
  language  = {en}
}
@incollection{StengerAltherrAbel2019,
  author    = {Stenger, David and Altherr, Lena and Abel, Dirk},
  title     = {Machine learning and metaheuristics for black-box optimization of product families: a case-study investigating solution quality vs. computational overhead},
  series = {Operations Research Proceedings 2018},
  booktitle = {Operations Research Proceedings 2018},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-18499-5 (Print)},
  doi       = {10.1007/978-3-030-18500-8_47},
  pages     = {379 -- 385},
  year      = {2019},
  abstract  = {In product development, numerous design decisions have to be made. Multi-domain virtual prototyping provides a variety of tools to assess technical feasibility of design options, however often requires substantial computational effort for just a single evaluation. A special challenge is therefore the optimal design of product families, which consist of a group of products derived from a common platform. Finding an optimal platform configuration (stating what is shared and what is individually designed for each product) and an optimal design of all products simultaneously leads to a mixed-integer nonlinear black-box optimization model. We present an optimization approach based on metamodels and a metaheuristic. To increase computational efficiency and solution quality, we compare different types of Gaussian process regression metamodels adapted from the domain of machine learning, and combine them with a genetic algorithm. We illustrate our approach on the example of a product family of electrical drives, and investigate the trade-off between solution quality and computational overhead.},
  language  = {en}
}
@incollection{TippkoetterMoehringRothetal.2019,
  author    = {Tippk{\"o}tter, Nils and M{\"o}hring, Sophie and Roth, Jasmine and Wulfhorst, Helene},
  title     = {Logistics of lignocellulosic feedstocks: preprocessing as a preferable option},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-97117-9},
  doi       = {10.1007/10_2017_58},
  pages     = {43 -- 68},
  year      = {2019},
  abstract  = {In comparison to crude oil, biorefinery raw materials are challenging in concerns of transport and storage. The plant raw materials are more voluminous, so that shredding and compacting usually are necessary before transport. These mechanical processes can have a negative influence on the subsequent biotechnological processing and shelf life of the raw materials. Various approaches and their effects on renewable raw materials are shown. In addition, aspects of decentralized pretreatment steps are discussed. Another important aspect of pretreatment is the varying composition of the raw materials depending on the growth conditions. This problem can be solved with advanced on-site spectrometric analysis of the material.},
  language  = {en}
}
@incollection{DuweTippkoetterUlber2018,
  author    = {Duwe, A. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Lignocellulose-Biorefinery: Ethanol-Focused},
  series = {Biorefineries},
  booktitle = {Biorefineries},
  publisher = {Springer},
  address   = {Cham},
  doi       = {10.1007/10_2016_72},
  pages     = {177 -- 215},
  year      = {2018},
  abstract  = {The development prospects of the world markets for petroleum and other liquid fuels are diverse and partly contradictory. However, comprehensive changes for the energy supply of the future are essential. Notwithstanding the fact that there are still very large deposits of energy resources from a geological point of view, the finite nature of conventional oil reserves is indisputable. To reduce our dependence on oil, the EU, the USA, and other major economic zones rely on energy diversification. For this purpose, alternative materials and technologies are being sought, and is most obvious in the transport sector. The objective is to progressively replace fossil fuels with renewable and more sustainable fuels. In this respect, biofuels have a pre-eminent position in terms of their capability of blending with fossil fuels and being usable in existing cars without substantial modification. Ethanol can be considered as the primary renewable liquid fuel. In this chapter enzymes, micro-organisms, and processes for ethanol production based on renewable resources are described.},
  language  = {en}
}