@article{SchmidtLangenHerzogetal.1997,
  author    = {Schmidt, Daniela and Langen, Karl-J. and Herzog, Hans and Wirths, Jochen and Holschbach, Markus and Kiwit, J{\"u}rgen C. W. and Ziemons, Karl and Coenen, Heinz-H. and M{\"u}ller-G{\"a}rtner, Hans-W.},
  title     = {Whole-body kinetics and dosimetry of L-3[123I]-iodo-α-methyltyrosine},
  series = {European Journal of Nuclear Medicine},
  volume    = {24},
  journal   = {European Journal of Nuclear Medicine},
  number    = {9},
  isbn      = {1619-7089},
  pages     = {1162 -- 1166},
  year      = {1997},
  language  = {en}
}
@incollection{LinckeHaertschHoffmannetal.1997,
  author    = {Lincke, D.-M. and Haertsch, P. and Hoffmann, C. P. and Lindemann, Markus},
  title     = {Electronic Commerce Plattformen f{\"u}r den Werkzeugmaschinenbau},
  series = {Internet im Industrieg{\"u}termarketing - Status quo und Entwicklungsperspektiven am Beispiel der Schweizer Werkzeugmaschinen-Industrie / Johannes Dickel ... (Hrsg.) Thexis-Fachbericht f{\"u}r Marketing. 97,4},
  booktitle = {Internet im Industrieg{\"u}termarketing - Status quo und Entwicklungsperspektiven am Beispiel der Schweizer Werkzeugmaschinen-Industrie / Johannes Dickel ... (Hrsg.) Thexis-Fachbericht f{\"u}r Marketing. 97,4},
  publisher = {Thexis},
  address   = {St. Gallen},
  isbn      = {3-908545-38-2},
  pages     = {60 -- 85},
  year      = {1997},
  language  = {de}
}
@article{BalewskiBrauksiepeHardt1997,
  author    = {Balewski, J. and Brauksiepe, S. and Hardt, Arno},
  title     = {Threshold measurements at the internal experimental facility COSY-11 / J. Balewski [u.a.]},
  series = {Nuclear physics A. Vol. 626, iss. 1-2},
  journal   = {Nuclear physics A. Vol. 626, iss. 1-2},
  issn      = {1873-1554 (E-Journal) ; 0375-9474 (Print)},
  pages     = {85 -- 92},
  year      = {1997},
  language  = {en}
}
@article{MakovickaGaertnerHardtetal.1997,
  author    = {Makovicka, C. and G{\"a}rtner, G. and Hardt, Arno and Hermann, W. and Wiechert, D. U.},
  title     = {Impregnated cathode surface investigations by SFM/STM and SEM/EDX},
  series = {Applied surface science. Vol. 111},
  journal   = {Applied surface science. Vol. 111},
  issn      = {1873-5584 (E-Journal); 0169-4332 (Print)},
  pages     = {70 -- 75},
  year      = {1997},
  language  = {en}
}
@book{LinkeHaertschHoffmannetal.1997,
  author    = {Linke, David-Michael and Haertsch, P. and Hoffmann, C. P. and Lindemann, Markus},
  title     = {Integrierte Electronic Commerce Systeme - Auswahlkriterien und Evaluation aktueller Produktangebote. Bericht BusinessMedia. 58},
  publisher = {Inst. f{\"u}r Wirtschaftsinformatik},
  address   = {St. Gallen},
  pages     = {VII, 94 S. : graph. Darst.},
  year      = {1997},
  language  = {de}
}
@inproceedings{KleinLindemann1997,
  author    = {Klein, Stefan and Lindemann, Markus},
  title     = {New architectures for web-enabled EDI-applications and their impact on VANS},
  series = {Global business in practice : proceedings of the Tenth International Bled Electronic Commerce Conference BLED '97, Bled, Slovenia, June 9-11 1997},
  booktitle = {Global business in practice : proceedings of the Tenth International Bled Electronic Commerce Conference BLED '97, Bled, Slovenia, June 9-11 1997},
  editor    = {Vogel, Douglas R.},
  publisher = {Moderna organizacija},
  address   = {Kranj},
  pages     = {556 -- 573},
  year      = {1997},
  language  = {en}
}
@article{Lindemann1997,
  author    = {Lindemann, Markus},
  title     = {Aufbau elektronischer M{\"a}rkte und Marktdienste zur Unterst{\"u}tzung der Auftragsabwicklung},
  series = {Planung + Produktion. Bd. 45 (1997), H. 6},
  journal   = {Planung + Produktion. Bd. 45 (1997), H. 6},
  pages     = {8 -- 14},
  year      = {1997},
  language  = {de}
}
@incollection{LindemannKlein1997,
  author    = {Lindemann, Markus and Klein, Stefan},
  title     = {Die Nutzung von Internet-Diensten im Rahmen des Elektronischen Datenaustauschs - Architekturvarianten und ein Anwendungsszenario},
  series = {Wirtschaftsinformatik '97 - Internationale Gesch{\"a}ftst{\"a}tigkeit auf der Basis flexibler Organisationsstrukturen und leistungsf{\"a}higer Informationssysteme / Hermann Krallmann (Hrsg.)},
  booktitle = {Wirtschaftsinformatik '97 - Internationale Gesch{\"a}ftst{\"a}tigkeit auf der Basis flexibler Organisationsstrukturen und leistungsf{\"a}higer Informationssysteme / Hermann Krallmann (Hrsg.)},
  publisher = {Physica-Verlag},
  address   = {Heidelberg},
  isbn      = {3-7908-0999-3},
  pages     = {513 -- 531},
  year      = {1997},
  language  = {de}
}
@techreport{SchmidLindemann1997,
  author    = {Schmid, Beat and Lindemann, Markus},
  title     = {Elemente eines Referenzmodells elektronischer M{\"a}rkte. Arbeitsbericht. Sonderdruck anl{\"a}sslich der WI' 97, Tutorium "Elektronische M{\"a}rkte". Bericht-Nr. IM HSG/CCEM/44},
  pages     = {IX, 54 S. : graph. Darst.},
  year      = {1997},
  language  = {de}
}
@article{LindemannRunge1997,
  author    = {Lindemann, Markus and Runge, Alexander},
  title     = {Permanent IT-support in electronic commerce transactions},
  series = {Electronic markets : the international journal of networked business. Vol. 7 (1997), iss. 1},
  journal   = {Electronic markets : the international journal of networked business. Vol. 7 (1997), iss. 1},
  issn      = {1422-8890},
  pages     = {18 -- 20},
  year      = {1997},
  language  = {en}
}
@book{Meliss1997,
  author    = {Meliß, Michael},
  title     = {Regenerative Energiequellen. Praktikum / ed. Michael Meliß},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-63218-2},
  pages     = {XXI, 149 S graph. Darst., Kt},
  year      = {1997},
  language  = {de}
}
@incollection{MelissSpaete1997,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Berechnung von Sonnenstand und -strahlung},
  series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63218-2},
  doi       = {10.1007/978-3-642-60864-3_2},
  pages     = {5 -- 22},
  year      = {1997},
  language  = {de}
}
@incollection{MelissSpaete1997,
  author    = {Meliß, Michael and Sp{\"a}te, Frank},
  title     = {Auslegung von solarthermischen Anlagen},
  series = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  booktitle = {Regenerative Energiequellen : Praktikum / ed. Michael Meliß},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {3-540-63218-2},
  doi       = {10.1007/978-3-642-60864-3_3},
  pages     = {23 -- 47},
  year      = {1997},
  language  = {de}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Required aerodynamic technologies},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_5},
  pages     = {69 -- 96},
  year      = {1997},
  abstract  = {In the preceeding chapters on "Son of Concorde, a Technology Challenge" and "Aerodynamic Multipoint Design Challenge" it was explained, that a well balanced contribution of new technologies in all major disciplines is required for realisation of a new Supersonic Commercial Transport (SCT). One of these technologies - usually one of the most important for aircraft-is aerodynamics. Here, the required "pure" aerodynamic technologies are specified in more detail, according to our present knowledge. Increasing insight into the problems may change the balance of importance of the individual technologies and may require some more contributions. We must never confine our knowledge to the knowledge base of an expert at a given time, but must stay open for new insights.},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Certification of supersonic civil transports},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_6},
  pages     = {97 -- 103},
  year      = {1997},
  abstract  = {Since certification of Concorde new certification standards were introduced including many new regulations to improve flight safety. Most of these standards are to prevent severe accidents in the future which happened in the past (here: after Concorde's certification). A new SCT has to fulfill these standards, although Concorde had none of these accidents. But accidents - although they sometimes occurred only for a specific aircraft type - have to be avoided for any (new) aircraft. Because of existing aircraft without typical accident types having demonstrated their reliability, they are allowed to go on based on their old certification; although sometimes new rules prevent accident types which are not connected to specific aircraft types - like e.g. evacuation rules. Anyway, Concorde is allowed to fly based on its old certification, and hopefully in the future will fly as safely as in the past. But a new SCT has to fulfill updated rules like any other aircraft, and it has to be "just another aircraft" [75].},
  language  = {en}
}
@incollection{Mertens1997,
  author    = {Mertens, Josef},
  title     = {Supersonic laminar flow},
  series = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  booktitle = {New design concepts for high speed air transport. - (Courses and lectures / International Centre for Mechanical Sciences ; 366)},
  editor    = {Sobieczky, H.},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  isbn      = {3-2118-2815-X},
  doi       = {10.1007/978-3-7091-2658-5_18},
  pages     = {275 -- 290},
  year      = {1997},
  abstract  = {Supersonic transports are very drag sensitive. Technology to reduce drag by application of laminar flow, therefore, will be important; it is a prerequisite to achieve very long range capability. In earlier studies it was assumed that SCTs would only become possible by application of laminar flow [376]. But today, we request an SCT to be viable without application of laminar flow in order to maintain its competitiveness when laminar flow becomes available for subsonic and supersonic transports. By reducing fuel burned, laminar flow drag reduction reduces size and weight of the aircraft, or increases range capability -whereas otherwise size and weight would grow towards infinity. Transition mechanisms from laminar to turbulent state of the boundary layer flow (ALT, CFI, TSI) function as for transonic transports, but at more severe conditions: higher sweep angles, cooled surfaces; higher mode instabilities (HMI) must at least be taken into account, although they may not become important below Mach 3. Hitherto there is a worldwide lack of ground test facilities to investigate TSI at the expected cruise Mach numbers between 1.6 and 2.4; in Stuttgart, Germany one such facility -a Ludwieg tube- is still in the validation phase. A quiet Ludwieg tunnel could be a favourable choice for Europe. But it will require a new approach in designing aircraft which includes improved theoretical predictions, usage of classical wind tunnels for turbulent flow and flight tests for validation.},
  language  = {en}
}
@article{SchollKreutzScholzetal.1997,
  author    = {Scholl, Ingrid and Kreutz, Reinhard and Scholz, C. and Conradi, H.},
  title     = {Ein Modell zum Aufbau multimedialer medizinischer Lern- und Nachschlagedokumente. Kreutz, R.; Scholz, C.; Conradi, H.; Scholl, I.; Spitzer, K.},
  series = {Medizinische Informatik, Biometrie und Epidemiologie : GMDS '97 ; Ulm, September 1997 / R. Muche ... (Hrsg.)},
  journal   = {Medizinische Informatik, Biometrie und Epidemiologie : GMDS '97 ; Ulm, September 1997 / R. Muche ... (Hrsg.)},
  publisher = {MVV, Medizin-Verl.},
  address   = {M{\"u}nchen},
  isbn      = {3-8208-1315-2},
  pages     = {121 -- 125},
  year      = {1997},
  language  = {de}
}
@article{SchollSovakarSpitzer1997,
  author    = {Scholl, Ingrid and Sovakar, Abhijit and Spitzer, Klaus},
  title     = {Konturverfolgung der Stimmlippen in laryngoskopischen Bildsequenzen},
  series = {Medizinische Informatik, Biometrie und Epidemiologie, GMDS '96, 41. Jahrestagung der GMDS, Bonn, September 1996},
  journal   = {Medizinische Informatik, Biometrie und Epidemiologie, GMDS '96, 41. Jahrestagung der GMDS, Bonn, September 1996},
  publisher = {MVV, Medizin-Verl.},
  address   = {M{\"u}nchen},
  isbn      = {3820812954},
  pages     = {123 -- 129},
  year      = {1997},
  language  = {de}
}
@article{SchollConradiWirtzetal.1997,
  author    = {Scholl, Ingrid and Conradi, Helmut and Wirtz, D. and Spreckelsen, Cord},
  title     = {OrthoDocs - Ein modellbasiertes Werkzeug zur Erstellung orthop{\"a}discher Lerndokumente. Conradi, Helmar; Wirtz, D.; Spreckelsen, Cord; Scholl, Ingrid; Kreutz, Reinhard; Forst, R.; Spitzer, Klaus},
  series = {Medizinische Informatik, Biometrie und Epidemiologie, GMDS '96, 41. Jahrestagung der GMDS, Bonn, September 1996},
  journal   = {Medizinische Informatik, Biometrie und Epidemiologie, GMDS '96, 41. Jahrestagung der GMDS, Bonn, September 1996},
  publisher = {MVV, Medizin-Verl.},
  address   = {M{\"u}nchen},
  isbn      = {3820812954},
  pages     = {169 -- 173},
  year      = {1997},
  language  = {de}
}
@article{SchollPalmLehmannetal.1997,
  author    = {Scholl, Ingrid and Palm, Christoph and Lehmann, Thomas Martin and Spitzer, Klaus},
  title     = {Quantitative Analyse der Stimmlippen},
  series = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]},
  journal   = {5. Workshop Digitale Bildverarbeitung in der Medizin : Freiburg, 10. -11. M{\"a}rz 1997 / Universit{\"a}t Freiburg. [Bernhard Arnolds ... (Hrsg.)]},
  publisher = {Zentralstelle f{\"u}r Forschungsf{\"o}rderung und Technologietransfer},
  address   = {Freiburg},
  isbn      = {3-9805054-2-1},
  pages     = {81 -- 86},
  year      = {1997},
  language  = {de}
}