@misc{RossJonesTeumerCapitainetal.2018,
  author    = {Ross-Jones, J. and Teumer, T. and Capitain, C. and Tippk{\"o}tter, Nils and Krause, M. J. and Methner, F.-J. and R{\"a}dle, M.},
  title     = {Analytical methods for in-line characterization of beer haze},
  series = {Trends in Brewing},
  journal   = {Trends in Brewing},
  year      = {2018},
  abstract  = {In most beers, producers strive to minimize haze to maximize visual appeal. To detect the formation of particulates, a measurement system for sub-micron particles is required. Beer haze is naturally occurring, composed of protein or polyphenol particles; in their early stage of growth their size is smaller than 2 µm. Microscopy analysis is time and resource intensive; alternatively, backscattering is an inexpensive option for detecting particle sizes of interest.},
  language  = {en}
}
@misc{FrauenrathDieringerPateletal.2011,
  author    = {Frauenrath, Tobias and Dieringer, Matthias and Patel, Nishant and Zerdem, Celal and Hentschel, Jan and Renz, Wolfgang and Niendorf, Thoralf},
  title     = {From Artifact to Merit: Cardiac Gated MRI at 7T \& 3T using Magneto-Hydrodynamic Effects for Synchronization},
  series = {2011 ISMRM Annual Meeting Proceedings},
  journal   = {2011 ISMRM Annual Meeting Proceedings},
  issn      = {1545-4428},
  year      = {2011},
  abstract  = {ECG is corrupted by magneto-hydrodynamic effects at higher magnetic field strength. Artifacts in the ECG trace and severe T-wave elevation might be mis-interpreted as R-waves. MHD being inherently sensitive to blood flow and blood velocity provides an alternative approach for cardiac gating, even in peripheral target areas far away from the commonly used upper torso positions of ECG electrodes. This feature would be very beneficial to address traveling time induced motion artifacts and trigger latency related issues raised by ECG-gated peripheral MR angiography. For all those reasons, this work proposes the use of MHD-trigger for cardiac gated MR.},
  language  = {en}
}
@article{Esch2010,
  author    = {Esch, Thomas},
  title     = {Trends in commercial vehicle powertrains},
  series = {ATZautotechnology},
  volume    = {2010},
  journal   = {ATZautotechnology},
  number    = {10},
  publisher = {Vieweg \& Sohn},
  address   = {Wiesbaden},
  issn      = {2192-886X},
  doi       = {10.1007/BF03247185},
  pages     = {26 -- 31},
  year      = {2010},
  abstract  = {Low emission zones and truck bans, the rising price of diesel and increases in road tolls: all of these factors are putting serious pressure on the transport industry. Commercial vehicle manufacturers and their suppliers are in the process of identifying new solutions to these challenges as part of their efforts to meet the EEV (enhanced environmentally friendly vehicle) limits, which are currently the most robust European exhaust and emissions standards for trucks and buses.},
  language  = {en}
}
@incollection{Finkenberger2018,
  author    = {Finkenberger, Isabel Maria},
  title     = {Die Stadt als st{\"a}dtisch-theatrale Versuchsanordnung: Wie wollen wir in Zukunft leben und welche Stadt brauchen wir daf{\"u}r?},
  series = {Un/Certain Futures - Rollen des Designs in gesellschaftlichen Transformationsprozessen},
  booktitle = {Un/Certain Futures - Rollen des Designs in gesellschaftlichen Transformationsprozessen},
  publisher = {transcript},
  address   = {Bielefeld},
  isbn      = {9783839443323},
  doi       = {https://doi.org/10.1515/9783839443323-009},
  pages     = {86 -- 95},
  year      = {2018},
  language  = {de}
}
@incollection{OezdilBerndtHoecker1991,
  author    = {{\"O}zdil, S. and Berndt, Heinz and H{\"o}cker, Hartwig},
  title     = {Systematische Erfassung der Best{\"a}ndigkeit von Ryton-, P84- und Dralon ATF 1063-Fasern unter Einwirkung verschiedener NOx-Konzentrationen in einem definierten Temperaturintervall},
  series = {Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V.},
  booktitle = {Schriftenreihe des Deutschen Wollforschungsinstitutes an der Technischen Hochschule Aachen e.V.},
  number    = {107},
  publisher = {Dt. Wollforschungsinstitut},
  address   = {Aachen},
  issn      = {0930-3723},
  pages     = {89 -- 129},
  year      = {1991},
  language  = {de}
}
@inproceedings{HerrmannKellyPrice2002,
  author    = {Herrmann, Ulf and Kelly, Bruce and Price, Henry},
  title     = {Two Tank Molten Salt Storage for Parabolic Trough Solar Power Plants},
  series = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  booktitle = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  editor    = {Steinfeld, Aldo},
  publisher = {Paul Scherrer Inst.},
  address   = {Villingen},
  isbn      = {3-9521409-3-7},
  pages     = {517 -- 524},
  year      = {2002},
  language  = {en}
}
@inproceedings{SchnabelBerndt1973,
  author    = {Schnabel, Eberhard and Berndt, Heinz},
  title     = {Zur selektive Abspaltbarkeit der t-Butyloxycarbonylgruppe},
  series = {Peptides 1971 : proceedings of the Eleventh European Peptide Symposium, Vienna, Austria, April 1971},
  booktitle = {Peptides 1971 : proceedings of the Eleventh European Peptide Symposium, Vienna, Austria, April 1971},
  editor    = {Nesvadba, H.},
  publisher = {North-Holland Publ. [u.a.]},
  address   = {Amsterdam [u.a.]},
  isbn      = {0-7204-4120-X},
  pages     = {69 -- 70},
  year      = {1973},
  language  = {en}
}
@article{GenzKingWahle1992,
  author    = {Genz, M. and King, H. and Wahle, Michael},
  title     = {Mikrozellige Polyurethan-Elastomere als Federelement in Automobilanwendungen},
  series = {Automobiltechnische Zeitschrift ; ATZ},
  volume    = {94},
  journal   = {Automobiltechnische Zeitschrift ; ATZ},
  number    = {10},
  issn      = {0001-2785},
  pages     = {512 -- 520},
  year      = {1992},
  language  = {de}
}
@article{MuellerSeginWeigandetal.2022,
  author    = {Mueller, Tobias and Segin, Alexander and Weigand, Christoph and Schmitt, Robert H.},
  title     = {Feature selection for measurement models},
  series = {International journal of quality \& reliability management},
  journal   = {International journal of quality \& reliability management},
  number    = {Vol. ahead-of-print, No. ahead-of-print.},
  publisher = {Emerald Group Publishing Limited},
  address   = {Bingley},
  issn      = {0265-671X},
  doi       = {10.1108/IJQRM-07-2021-0245},
  year      = {2022},
  abstract  = {Purpose In the determination of the measurement uncertainty, the GUM procedure requires the building of a measurement model that establishes a functional relationship between the measurand and all influencing quantities. Since the effort of modelling as well as quantifying the measurement uncertainties depend on the number of influencing quantities considered, the aim of this study is to determine relevant influencing quantities and to remove irrelevant ones from the dataset. Design/methodology/approach In this work, it was investigated whether the effort of modelling for the determination of measurement uncertainty can be reduced by the use of feature selection (FS) methods. For this purpose, 9 different FS methods were tested on 16 artificial test datasets, whose properties (number of data points, number of features, complexity, features with low influence and redundant features) were varied via a design of experiments. Findings Based on a success metric, the stability, universality and complexity of the method, two FS methods could be identified that reliably identify relevant and irrelevant influencing quantities for a measurement model. Originality/value For the first time, FS methods were applied to datasets with properties of classical measurement processes. The simulation-based results serve as a basis for further research in the field of FS for measurement models. The identified algorithms will be applied to real measurement processes in the future.},
  language  = {en}
}
@article{GaigallGerstenbergTrinh2022,
  author    = {Gaigall, Daniel and Gerstenberg, Julian and Trinh, Thi Thu Ha},
  title     = {Empirical process of concomitants for partly categorial data and applications in statistics},
  series = {Bernoulli},
  volume    = {28},
  journal   = {Bernoulli},
  number    = {2},
  publisher = {International Statistical Institute},
  address   = {Den Haag, NL},
  issn      = {1573-9759},
  doi       = {10.3150/21-BEJ1367},
  pages     = {803 -- 829},
  year      = {2022},
  abstract  = {On the basis of independent and identically distributed bivariate random vectors, where the components are categorial and continuous variables, respectively, the related concomitants, also called induced order statistic, are considered. The main theoretical result is a functional central limit theorem for the empirical process of the concomitants in a triangular array setting. A natural application is hypothesis testing. An independence test and a two-sample test are investigated in detail. The fairly general setting enables limit results under local alternatives and bootstrap samples. For the comparison with existing tests from the literature simulation studies are conducted. The empirical results obtained confirm the theoretical findings.},
  language  = {en}
}
@misc{FrauenrathBeckerHezeletal.2010,
  author    = {Frauenrath, Tobias and Becker, Meike and Hezel, Fabian and Krombach, Gabriele A. and Kremer, Ute and Schulz-Menger, Jeanette and Niendorf, Thoralf},
  title     = {Comparison of Left Function Assessment Using Phonocardiogram and Electrocardiogram Triggered 2D SSFP CINE MR Imaging at 1.5 T and 3.0 T},
  series = {2010 ISMRM-ESMRMB joint annual meeting},
  journal   = {2010 ISMRM-ESMRMB joint annual meeting},
  issn      = {1545-4428},
  year      = {2010},
  abstract  = {As high-field cardiac MRI (CMR) becomes more widespread the propensity of ECG to distortions and mistriggering increases and with it the motivation for a cardiac triggering alternative. Hence, this study explores the suitability of acoustic cardiac triggering (ACT) for left ventricular (LV) function assessment in healthy subjects at 1.5T and 3.0T.},
  language  = {en}
}
@inproceedings{JanotteFecklerKoetteretal.2014,
  author    = {Janotte, N. and Feckler, G. and K{\"o}tter, Jens and Decker, Stefan and Herrmann, Ulf and Schmitz, Mark and L{\"u}pfert, E.},
  title     = {Dynamic performance evaluation of the HelioTrough® collector demonstration loop : towards a new benchmark in parabolic trough qualification},
  series = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  booktitle = {SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)},
  publisher = {Curran},
  address   = {Red Hook, NY},
  isbn      = {978-1-63266-904-9},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2014.03.012},
  pages     = {109 -- 117},
  year      = {2014},
  language  = {en}
}
@phdthesis{Mainz2017,
  author    = {Mainz, Stefan},
  title     = {Zur Berechnung der Tragf{\"a}higkeit von d{\"u}nnwandigen Koppelpfetten aus Kaltprofilen f{\"u}r Biegung um die schwache Achse und Torsion},
  address   = {Hamburg},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:1373-opus-3798},
  pages     = {261 Seiten},
  year      = {2017},
  language  = {de}
}
@techreport{DammAnthrakidisFend2016,
  author    = {Damm, Marc Andr{\´e} and Anthrakidis, Anette and Fend, Thomas},
  title     = {Keramische Porenk{\"o}rpersysteme als SCR-Mischer und Hydrolysekatalysator : BMBF-Projekt: Hydromix : Schlussbericht : Laufzeit: 01.10.2011 bis 31.03.2015},
  address   = {Aachen},
  pages     = {30 Seiten : Illustrationen, Diagramme},
  year      = {2016},
  language  = {de}
}
@article{AnikTopuzTuncel1992,
  author    = {Anik, Sabri and Topuz, A. and Tuncel, H. S.},
  title     = {Einfluß der Parameter beim Diffusionsschweißen der St{\"a}hle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone},
  series = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  volume    = {44},
  journal   = {Schweißen und Schneiden : Fachzeitschrift f{\"u}r Schweißen und verwandte Verfahren},
  number    = {2},
  issn      = {0036},
  pages     = {97 -- 100},
  year      = {1992},
  language  = {de}
}
@article{WillmsBeerFroehlkeetal.1993,
  author    = {Willms, Herbert and Beer, Stefan and Fr{\"o}hlke, K. and Haidn, O.J.},
  title     = {Regelung eines Wasserstoff-/Sauerstoff-Dampferzeugers mit Hilfe eines modifizierten Zirkondioxid-Sensors},
  year      = {1993},
  language  = {de}
}
@incollection{SchultLosseCzarneckietal.2023,
  author    = {Schult, Prince Garcia and Losse, Ann-Kathrin and Czarnecki, Christian and Sultanow, Eldar},
  title     = {Proposing a Framework to address the Sustainable Development Goals},
  series = {EnviroInfo 2023},
  booktitle = {EnviroInfo 2023},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-736-4},
  issn      = {1617-5468},
  doi       = {10.18420/env2023-022},
  pages     = {243 -- 249},
  year      = {2023},
  abstract  = {Reducing poverty, protecting the planet, and improving life on earth for everyone are the essential goals of the "2030 Agenda for Sustainable Development"committed by the United Nations (UN). Achieving those goals will require technological innovation as well as their implementation in almost all areas of our business and day-to-day life. This paper proposes a high-level framework that collects and structures different uses cases addressing the goals defined by the UN. Hence, it contributes to the discussion by proposing technical innovations that can be used to achieve those goals. As an example, the goal "Climate Action{\"i}s discussed in detail by describing use cases related to tackling biodiversity loss in order to conservate ecosystems.},
  language  = {en}
}
@article{FinkenbergerSchlaich2014,
  author    = {Finkenberger, Isabel Maria and Schlaich, Christoph},
  title     = {Mehr als Wohnen. Vom Zusammenleben in integrierten Nachbarschaften},
  series = {APuZ - Aus Politik und Zeitgeschichte},
  volume    = {2014},
  journal   = {APuZ - Aus Politik und Zeitgeschichte},
  number    = {20-21},
  publisher = {Bundeszentrale f{\"u}r politische Bildung - bpb},
  address   = {Bonn},
  issn      = {2194-3621},
  pages     = {46 -- 52},
  year      = {2014},
  abstract  = {Neue D{\"o}rfer braucht das Land! D{\"o}rfer in der Stadt und D{\"o}rfer auf dem Land (…). Die Planung und Gestaltung nachhaltiger Raumsysteme, die durch ein neues Verst{\"a}ndnis des gemeinschaftlichen Besitzes (und dessen Nutzung) ressourcenfressende Individualisierungstendenzen unserer Gesellschaft {\"u}berwinden, aber zugleich gr{\"o}ßtm{\"o}glichen Freiraum f{\"u}r eine individuelle Pers{\"o}nlichkeitsentfaltung zur Verf{\"u}gung stellen." Dieses Zitat der Hamburger Initiative "Wir sind Dorf" beschreibt eine aktuelle Diskussion in unserer Gesellschaft, die sowohl in der Forschung und forschungsgeleiteten Initiativen, in Politik und Planung als auch in der B{\"u}rger-schaft stattfindet. Sie wird nicht nur auf wissenschaftlichen Veranstaltungen gef{\"u}hrt, sondern auch in konkreten Projekten f{\"u}r integrative Lebenswelten, die Fragestellungen von Ern{\"a}hrung und Energieversorgung, von Arbeit und {\"O}konomie, aber auch eines neuen r{\"a}umlichen und sozialen Miteinanders einbeziehen. Anders als bei den weit verbreiteten Baugruppen geht es nicht ausschließlich um die Schaffung von Wohnraum. Die Nachbarschaftsidee verbindet das Bed{\"u}rfnis nach gemeinschaftlichem Wohnen und Wirtschaften mit einer neuen Werteorientierung, die auf pers{\"o}nlicher Verantwortungs{\"u}bernahme beruht.},
  language  = {de}
}
@book{DrummScheuermannWeidner2024,
  author    = {Drumm, Christian and Scheuermann, Bernd and Weidner, Stefan},
  title     = {Introduction to SAP S/4HANA® : The official companion book based on model company Global Bike-for learning, teaching, and training},
  publisher = {Espresso Tutorials},
  address   = {Gleichen},
  isbn      = {9783960122685},
  pages     = {619 Seiten},
  year      = {2024},
  abstract  = {This easy-to-understand introduction to SAP S/4HANA guides you through the central processes in sales, purchasing and procurement, finance, production, and warehouse management using the model company Global Bike. Familiarize yourself with the basics of business administration, the relevant organizational data, master data, and transactional data, as well as a selection of core business processes in SAP. Using practical examples and tutorials, you will soon become an SAP S/4HANA professional! Tutorials and exercises for beginners, advanced users, and experts make it easy for you to practice your new knowledge. The prerequisite for this book is access to an SAP S/4HANA client with Global Bike version 4.1. - Business fundamentals and processes in the SAP system - Sales, purchasing and procurement, production, finance, and warehouse management - Tutorials at different qualification levels, exercises, and recap of case studies - Includes extensive download material for students, lecturers, and professors},
  language  = {en}
}
@article{Sillius2014,
  author    = {Sillius, Sarah},
  title     = {„Viele machen gutes Marketing, ohne es zu wissen" : zwei Experten von FH [Prof. Dr. Gert Hoepner] und RWTH Aachen [Prof. Dr. Daniel Mentzel] erkl{\"a}ren, wie Unternehmen ihre Zielgruppe besser erreichen},
  series = {Wirtschaftliche Nachrichten : das Magazin f{\"u}r Unternehmen / Industrie- und Handelskammer Aachen},
  volume    = {2014},
  journal   = {Wirtschaftliche Nachrichten : das Magazin f{\"u}r Unternehmen / Industrie- und Handelskammer Aachen},
  number    = {3},
  publisher = {IHK Aachen},
  address   = {Aachen},
  pages     = {16 -- 18},
  year      = {2014},
  language  = {de}
}