@book{LauthMuellerHoelderich1993,
  author    = {Lauth, Jakob and M{\"u}ller, Ulrich and Hoelderich, Wolfgang},
  title     = {Farbige, kristalline Alumophosphate und/oder Silicoalumophosphate vom AEL-Typ oder VFI-Typ ; Europ{\"a}ische Patentanmeldung EP0534289A1 ; Ver{\"o}ffentlichungstag im Patentblatt: 06.05.1993 / BASF AG, 6700 Ludwigshafen. Erfinder: G{\"u}nther Lauth; Ulrich M{\"u}ller ; Wolfgang Hoelderich ...},
  publisher = {Europ{\"a}isches Patentamt},
  address   = {[M{\"u}nchen u.a.]},
  pages     = {15 S.},
  year      = {1993},
  language  = {de}
}
@article{ElMoussaouiTalbiAtmaneetal.2020,
  author    = {El Moussaoui, Noureddine and Talbi, Sofian and Atmane, Ilyas and Kassmi, Khalil and Schwarzer, Klemens and Chayeb, Hamid and Bachiri, Najib},
  title     = {Feasibility of a new design of a Parabolic Trough Solar Thermal Cooker (PSTC)},
  series = {Solar Energy},
  volume    = {201},
  journal   = {Solar Energy},
  number    = {Vol. 201 (May 2020)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0038-092X},
  doi       = {10.1016/j.solener.2020.03.079},
  pages     = {866 -- 871},
  year      = {2020},
  abstract  = {In this article, we describe the structure, the functioning, and the tests of parabolic trough solar thermal cooker (PSTC). This oven is designed to meet the needs of rural residents, including Urban, which requires stable cooking temperatures above 200 °C. The cooking by this cooker is based on the concentration of the sun's rays on a glass vacuum tube and heating of the oil circulate in a big tube, located inside the glass tube. Through two small tubes, associated with large tube, the heated oil, rise and heats the pot of cooking pot containing the food to be cooked (capacity of 5 kg). This cooker is designed in Germany and extensively tested in Morocco for use by the inhabitants who use wood from forests. During a sunny day, having a maximum solar radiation around 720 W/m2 and temperature ambient around 26 °C, maximum temperatures recorded of the small tube, the large tube and the center of the pot are respectively: 370 °C, 270 °C and 260 °C. The cooking process with food at high (fries, ..), we show that the cooking oil temperature rises to 200 °C, after 1 h of heating, the cooking is done at a temperature of 120 °C for 20 min. These temperatures are practically stable following variations and decreases in the intensity of irradiance during the day. The comparison of these results with those of the literature shows an improvement of 30-50 \% on the maximum value of the temperature with a heat storage that could reach 60 min of autonomy. All the results obtained show the good functioning of the PSTC and the feasibility of cooking food at high temperature (>200 °C).},
  language  = {en}
}
@article{WiegandVoigtAlbrechtetal.2013,
  author    = {Wiegand, Sandra and Voigt, Birgit and Albrecht, Dirk and Bongaerts, Johannes and Evers, Stefan and Hecker, Michael and Daniel, Rolf and Liesegang, Heiko},
  title     = {Fermentation stage-dependent adaptations of Bacillus licheniformis during enzyme production},
  series = {Microbial Cell Factories},
  volume    = {12},
  journal   = {Microbial Cell Factories},
  publisher = {Biomed Central},
  address   = {London},
  issn      = {1475-2859},
  doi       = {10.1186/1475-2859-12-120},
  pages     = {120},
  year      = {2013},
  language  = {en}
}
@misc{PothMonzonTippkoetteretal.2009,
  author    = {Poth, S. and Monzon, M. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Fermentation von Hydrolysaten aus Lignocellulose},
  series = {Chemie Ingenieur Technik},
  volume    = {81},
  journal   = {Chemie Ingenieur Technik},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.200950243},
  pages     = {1220},
  year      = {2009},
  abstract  = {Die {\"o}konomische Abh{\"a}ngigkeit von fossilen Brennstoffen und der klimatische Wandel durch die Nutzung dieser haben zu einer intensiven Suche nach erneuerbaren Rohstoffen f{\"u}r die Produktion von Chemikalien und Treibstoffen gef{\"u}hrt. Ein viel versprechender Rohstoff in diesem Zusammenhang sind Zucker, die mittels enzymatischer Hydrolyse aus Lignocellulose gewonnen werden k{\"o}nnen. Die Fermentation erfolgt mit Cellulose- bzw. Hemicellulose-Fraktionen, welche durch thermo-chemische Vorbehandlung von Holz gewonnen und anschließend enzymatisch hydrolysiert werden. Die in den Hydrolysaten enthaltenen Zuckermonomere dienen als Kohlenstoffquelle f{\"u}r die Produktion von Ethanol. Da sowohl Glucose als auch Xylose in den unterschiedlichen Fraktionen enthalten sind, wird zur Umsetzung dieser eine Co-Fermentation zweier Hefen durchgef{\"u}hrt. Im Rahmen der Optimierung dieser Fermentationen werden neben der Erg{\"a}nzung der Hydrolysate durch notwendige Salze auch Verfahrenweisen wie Fed-Batch-Fermentationen untersucht. Ein weiterer interessanter Ansatz, welcher in diesem Rahmen gepr{\"u}ft wird, ist die enzymatische Hydrolyse der Lignocellulose-Fraktionen und die simultane Fermentation der dabei entstehenden Zucker in einem Schritt. Des Weiteren wurde die Eignung der Hydrolysate f{\"u}r die Biomasseproduktion anderer Mikroorganismen wie Escherichia coli getestet.},
  language  = {de}
}
@article{GerigkMaassTakorsetal.2000,
  author    = {Gerigk, M. and Maaß, D. and Takors, Ralf and Kreutzer, A. and Wandrey, Christian and Bongaerts, Johannes and Wubbolts, Marcel},
  title     = {Fermentative Herstellung von L-Phenylalanin im Fed-Batch Verfahren mit E. coli unter Einbindung eines integrierten Aufarbeitungsverfahrens},
  series = {Chemie-Ingenieur-Technik (CIT)},
  volume    = {Vol. 72},
  journal   = {Chemie-Ingenieur-Technik (CIT)},
  number    = {Iss. 9},
  issn      = {1522-2640 (E-Journal); 0009-286X (Print)},
  pages     = {926 -- 927},
  year      = {2000},
  language  = {de}
}
@article{EngelBayerHoltmannetal.2019,
  author    = {Engel, Mareike and Bayer, Hendrik and Holtmann, Dirk and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Flavin secretion of Clostridium acetobutylicum in a bioelectrochemical system - Is an iron limitation involved?},
  series = {Bioelectrochemistry},
  journal   = {Bioelectrochemistry},
  number    = {In Press, Accepted Manuscript},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1567-5394},
  doi       = {10.1016/j.bioelechem.2019.05.014},
  year      = {2019},
  language  = {en}
}
@article{KotterGrazykGeissleetal.1990,
  author    = {Kotter, Michael and Grazyk, J. and Geißle, W. and Roth, A.},
  title     = {Fließeigenschaften von Keramiken f{\"u}r die Herstellung von Katalysatortr{\"a}gern / J. Grazyk ; W. Gleißle ; A. Roth ; M. Kotter},
  series = {Erd{\"o}l \& Kohle, Erdgas, Petrochemie : EKEP. 43 (1990), H. 1},
  journal   = {Erd{\"o}l \& Kohle, Erdgas, Petrochemie : EKEP. 43 (1990), H. 1},
  isbn      = {0014-0058},
  pages     = {27 -- 30},
  year      = {1990},
  language  = {de}
}
@misc{MaurerO'ConnellSiegertetal.2012,
  author    = {Maurer, Karl-Heinz and O'Connell, Timothy and Siegert, Petra and Weber, Thomas and Tondera, Susanne and Hellmuth, Hendrik},
  title     = {Fl{\"u}ssige Tensidzubereitung enthaltend Lipase und Phosphonat [Offenlegungsschrift]},
  publisher = {Deutsches Patent- und Markenamt / Europ{\"a}isches Patentamt / WIPO},
  address   = {M{\"u}nchen / Den Hague / Genf},
  pages     = {1 -- 22},
  year      = {2012},
  language  = {de}
}
@article{GebeshuberKornauthDongetal.2013,
  author    = {Gebeshuber, Christoph A. and Kornauth, Christoph and Dong, Lihua and Sierig, Ralph and Seibler, Jost and Reiss, Martina and Tauber, Stefanie and Bilban, Martin and Wang, Shijun and Kain, Renate and B{\"o}hmig, Georg A. and Moeller, Marcus J. and Gr{\"o}ne, Hermann-Josef and Englert, Christoph and Martinez, Javier and Kerjaschki, Dontscho},
  title     = {Focal segmental glomerulosclerosis is induced by microRNA-193a and its downregulation of WT1},
  series = {Nature Medicine},
  volume    = {19},
  journal   = {Nature Medicine},
  number    = {4},
  issn      = {1078-8956},
  doi       = {10.1038/nm.3142},
  pages     = {481 -- 487},
  year      = {2013},
  language  = {en}
}
@article{KotterHammonRiekert1988,
  author    = {Kotter, Michael and Hammon, Ulrich and Riekert, Lothar},
  title     = {Formation of ethene and propene from methanol on zeolite ZSM-5 II. Preparation of finished catalysts and operation of a fixed-bed pilot plant / U. Hammon ; M. Kotter ; L. Riekert},
  series = {Applied catalysis. 37 (1988)},
  journal   = {Applied catalysis. 37 (1988)},
  isbn      = {0166-9834},
  pages     = {155 -- 174},
  year      = {1988},
  language  = {en}
}
@book{MuellerRath2004,
  author    = {M{\"u}ller, Bodo and Rath, Walter},
  title     = {Formulierung von Kleb- und Dichtstoffen : das kompetente Lehrbuch f{\"u}r Studium und Praxis},
  publisher = {Vincentz Network},
  address   = {Hannover},
  isbn      = {3-87870-791-6},
  pages     = {290 S. : zahlr. graph. Darst.},
  year      = {2004},
  language  = {de}
}
@book{MuellerRath2015,
  author    = {M{\"u}ller, Bodo and Rath, Walter},
  title     = {Formulierung von Kleb- und Dichtstoffen: das kompetente Lehrbuch f{\"u}r Studium und Praxis},
  edition   = {3., vollst. {\"u}berarb. Aufl.},
  publisher = {Vincentz Network},
  address   = {Hannover},
  isbn      = {978-3-86630-605-9},
  pages     = {375 S. : Ill., graph. Darst},
  year      = {2015},
  language  = {de}
}
@article{SchoeningBiselliSelmeretal.2012,
  author    = {Sch{\"o}ning, Michael Josef and Biselli, Manfred and Selmer, Thorsten and {\"O}hlschl{\"a}ger, Peter and Baumann, Marcus and F{\"o}rster, Arnold and Poghossian, Arshak},
  title     = {Forschung „zwischen" den Disziplinen: das Institut f{\"u}r Nano- und Biotechnologien},
  series = {Analytik news : das Online-Labormagazin f{\"u}r Labor und Analytik},
  volume    = {Publ. online},
  journal   = {Analytik news : das Online-Labormagazin f{\"u}r Labor und Analytik},
  publisher = {Dr. Beyer Internet-Beratung},
  address   = {Ober-Ramstadt},
  pages     = {11 Seiten},
  year      = {2012},
  abstract  = {"Biologie trifft Mikroelektronik", das Motto des Instituts f{\"u}r Nano- und Biotechnologien (INB) an der FH Aachen, unterstreicht die zunehmende Bedeutung interdisziplin{\"a}r gepr{\"a}gter Forschungsaktivit{\"a}ten. Der thematische Zusammenschluss grundst{\"a}ndiger Disziplinen, wie die Physik, Elektrotechnik, Chemie, Biologie sowie die Materialwissenschaften, l{\"a}sst neue Forschungsgebiete entstehen, ein herausragendes Beispiel hierf{\"u}r ist die Nanotechnologie: Hier werden neue Werkstoffe und Materialien entwickelt, einzelne Nanopartikel oder Molek{\"u}le und deren Wechselwirkung untersucht oder Schichtstrukturen im Nanometerbereich aufgebaut, die neue und vorher nicht bekannte Eigenschaften hervorbringen. Vor diesem Hintergrund b{\"u}ndelt das im Jahre 2006 gegr{\"u}ndete INB die an der FH Aachen vorhandenen Kompetenzen von derzeit insgesamt sieben Laboratorien auf den Gebieten der Halbleitertechnik und Nanoelektronik, Nanostrukturen und DNA-Sensorik, der Chemo- und Biosensorik, der Enzymtechnologie, der Mikrobiologie und Pflanzenbiotechnologie, der Zellkulturtechnik, sowie der Roten Biotechnologie synergetisch. In der Nano- und Biotechnologie steckt außergew{\"o}hnliches Potenzial! Nicht zuletzt deshalb stellen sich die Forscher der Herausforderung, in diesem Bereich gemeinsam zu forschen und Schnittstellen zu nutzen, um so bei der Gestaltung neuartiger Ideen und Produkte mitzuwirken, die zuk{\"u}nftig unser allt{\"a}gliches Leben ver{\"a}ndern werden. Im Folgenden werden die verschiedenen Forschungsbereiche kurz zusammenfassend vorgestellt und vorhandene Interaktionen anhand von exemplarisch ausgew{\"a}hlten, aktuellen Forschungsprojekten skizziert.},
  language  = {de}
}
@article{Lassonczyk1989,
  author    = {Lassonczyk, Beate},
  title     = {Fossile Bodenbildung in Nord-Somalia},
  series = {Mitteilungen der Deutschen Bodenkundlichen Gesellschaft. 59 (1989), H. 2},
  journal   = {Mitteilungen der Deutschen Bodenkundlichen Gesellschaft. 59 (1989), H. 2},
  isbn      = {0343-107x},
  pages     = {927 -- 930},
  year      = {1989},
  language  = {de}
}
@article{SchwabHojdisLacayoetal.2016,
  author    = {Schwab, Lukas and Hojdis, Nils and Lacayo, Jorge and Wilhelm, Manfred},
  title     = {Fourier-Transform Rheology of Unvulcanized, Carbon Black Filled Styrene Butadiene Rubber},
  series = {Macromolecular Materials and Engineering},
  volume    = {301},
  journal   = {Macromolecular Materials and Engineering},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1439-2054},
  doi       = {10.1002/mame.201500356},
  pages     = {457 -- 468},
  year      = {2016},
  abstract  = {Rubber materials filled with reinforcing fillers display nonlinear rheological behavior at small strain amplitudes below γ0 < 0.1. Nevertheless, rheological data are analyzed mostly in terms of linear parameters, such as shear moduli (G′, G″), which loose their physical meaning in the nonlinear regime. In this work styrene butadiene rubber filled with carbon black (CB) under large amplitude oscillatory shear (LAOS) is analyzed in terms of the nonlinear parameter I3/1. Three different CB grades are used and the filler load is varied between 0 and 70 phr. It is found that I3/1(φ) is most sensitive to changes of the total accessible filler surface area at low strain amplitudes (γ0 = 0.32). The addition of up to 70 phr CB leads to an increase of I3/1(φ) by a factor of more than ten. The influence of the measurement temperature on I3/1 is pronounced for CB levels above the percolation threshold.},
  language  = {en}
}
@misc{MoehringWulfhorstCapitainetal.2016,
  author    = {M{\"o}hring, S. and Wulfhorst, H. and Capitain, C. and Roth, J. and Tippk{\"o}tter, Nils},
  title     = {Fractioning of lignocellulosic biomass: Scale-down and automation of thermal pretreatment for parameter optimization},
  series = {Chemie Ingenieur Technik},
  volume    = {88},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201650288},
  pages     = {1229},
  year      = {2016},
  abstract  = {In order to efficiently convert lignocellulose, it is often necessary to conduct a pretreatment. The biomass considered in this study typically comprises of agricultural and horticultural residues, as well as beechwood. A very environmentally friendly method, namely, fungal pretreatment using white-rot fungi, leads to an enhanced enzymatic hydrolysis. In contrast to other processes presented, the energy input is extremely low. However, the fungal growth on the lignocellulosic substrates takes several weeks at least in order to be effective. Thus, the reduction of chemicals and energy for thermal processing is a target of our current research. Liquid hot water (LHW) and solvent-based pretreatment (OrganoSolv) require more complex equipment, as they depend on high temperatures (160 - 180 °C) and enhanced pressure (up to 20 bar). However, they prove to be promising processes in regard to the fractioning of lignocellulose. For optimal lignin recovery the parameters differ from those established in cellulose extraction. A novel screening system scaled down to a reaction volume of 100 mL has been developed and successfully tested for this purpose.},
  language  = {en}
}
@misc{RathSeitz1993,
  author    = {Rath, Walter and Seitz, Karsten},
  title     = {Fr{\"u}hregenfeste Dichtmasse auf Basis w{\"a}ssriger Acrylatdispersionen und Verfahren zu ihrer Herstellung},
  publisher = {Deutsches Patent- und Markenamt},
  address   = {M{\"u}nchen},
  year      = {1993},
  language  = {de}
}
@misc{RathSeitz1993,
  author    = {Rath, Walter and Seitz, Karsten},
  title     = {Fr{\"u}hregenfeste Dichtmasse auf Basis w{\"a}ssriger Acrylatdispersionen und Verfahren zu ihrer Herstellung},
  publisher = {Deutsches Patent- und Markenamt},
  address   = {M{\"u}nchen},
  year      = {1993},
  language  = {de}
}
@article{ZientzBongaertsUnden1998,
  author    = {Zientz, Evelyn and Bongaerts, Johannes and Unden, Gottfried},
  title     = {Fumarate regulation of gene expression in Escherichia coli by the DcuSR (dcuSR genes) two-component regulatory system},
  series = {Journal of bacteriology},
  volume    = {Vol. 180},
  journal   = {Journal of bacteriology},
  number    = {No. 20},
  issn      = {1098-5530 (E-Journal); 0021-9193 (Print)},
  pages     = {5421 -- 5425},
  year      = {1998},
  language  = {en}
}
@incollection{ArtmannMeruvuKizildagetal.2018,
  author    = {Artmann, Gerhard and Meruvu, Haritha and Kizildag, Sefa and Temiz Artmann, Ayseg{\"u}l},
  title     = {Functional Toxicology and Pharmacology Test of Cell Induced Mechanical Tensile Stress in 2D and 3D Tissue Cultures},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_7},
  pages     = {157 -- 192},
  year      = {2018},
  abstract  = {Mechanical forces/tensile stresses are critical determinants of cellular growth, differentiation and migration patterns in health and disease. The innovative "CellDrum technology" was designed for measuring mechanical tensile stress of cultured cell monolayers/thin tissue constructs routinely. These are cultivated on very thin silicone membranes in the so-called CellDrum. The cell layers adhere firmly to the membrane and thus transmit the cell forces generated. A CellDrum consists of a cylinder which is sealed from below with a 4 μm thick, biocompatible, functionalized silicone membrane. The weight of cell culture medium bulbs the membrane out downwards. Membrane indentation is measured. When cells contract due to drug action, membrane, cells and medium are lifted upwards. The induced indentation changes allow for lateral drug induced mechanical tension quantification of the micro-tissues. With hiPS-induced (human) Cardiomyocytes (CM) the CellDrum opens new perspectives of individualized cardiac drug testing. Here, monolayers of self-beating hiPS-CMs were grown in CellDrums. Rhythmic contractions of the hiPS-cells induce membrane up-and-down deflections. The recorded cycles allow for single beat amplitude, single beat duration, integration of the single beat amplitude over the beat time and frequency analysis. Dose effects of agonists and antagonists acting on Ca2+ channels were sensitively and highly reproducibly observed. Data were consistent with published reference data as far as they were available. The combination of the CellDrum technology with hiPS-Cardiomyocytes offers a fast, facile and precise system for pharmacological and toxicological studies. It allows new preclinical basic as well as applied research in pharmacolgy and toxicology.},
  language  = {en}
}