@article{SchoppDollGraeseretal.2016,
  author    = {Schopp, Christoph and Doll, Timo and Gr{\"a}ser, Ulrich and Harzheim, Thomas and Heuermann, Holger and Kling, Rainer and Marso, Michael},
  title     = {Capacitively Coupled High-Pressure Lamp Using Coaxial Line Networks},
  series = {IEEE Transactions on Microwave Theory and Techniques},
  volume    = {64},
  journal   = {IEEE Transactions on Microwave Theory and Techniques},
  number    = {10},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {0018-9480},
  doi       = {10.1109/TMTT.2016.2600326},
  pages     = {3363 -- 3368},
  year      = {2016},
  abstract  = {This paper describes the development of a capacitively coupled high-pressure lamp with input power between 20 and 43 W at 2.45 GHz, using a coaxial line network. Compared with other electrodeless lamp systems, no cavity has to be used and a reduction in the input power is achieved. Therefore, this lamp is an alternative to the halogen incandescent lamp for domestic lighting. To serve the demands of domestic lighting, the filling of the lamp is optimized over all other resulting requirements, such as high efficacy at low induced powers and fast startups. A workflow to develop RF-driven plasma applications is presented, which makes use of the hot S-parameter technique. Descriptions of the fitting process inside a circuit and FEM simulator are given. Results of the combined ignition and operation network from simulations and measurements are compared. An initial prototype is built and measurements of the lamp's lighting properties are presented along with an investigation of the efficacy optimizations using large signal amplitude modulation. With this lamp, an efficacy of 135 lmW -1 is achieved.},
  language  = {en}
}
@article{RietschPfaffenrotBitzetal.2017,
  author    = {Rietsch, Stefan H. G. and Pfaffenrot, Viktor and Bitz, Andreas and Orzada, Stephan and Brunheim, Sascha and Lazik-Palm, Andrea and Theysohn, Jens M. and Ladd, Mark E. and Quick, Harald H. and Kraff, Oliver},
  title     = {An 8-channel transceiver 7-channel receive RF coil setup for high SNR ultrahigh-field MRI of the shoulder at 7T},
  series = {Medical Physics},
  journal   = {Medical Physics},
  number    = {Article in press},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0094-2405},
  doi       = {10.1002/mp.12612},
  year      = {2017},
  language  = {en}
}
@inproceedings{EndressBragard2017,
  author    = {Endress, Tim and Bragard, Michael},
  title     = {Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench},
  series = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-5386-3846-0},
  doi       = {10.1109/RTUCON.2017.8124775},
  pages     = {5 Seiten},
  year      = {2017},
  abstract  = {This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {Improvements for a robust production in the RoboCup logistics league 2016},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_49},
  pages     = {589 -- 600},
  year      = {2017},
  language  = {en}
}
@article{OrzadaBitzJohstetal.2017,
  author    = {Orzada, Stephan and Bitz, Andreas and Johst, S{\"o}ren and Gratz, Marcel and V{\"o}lker, Maximilian N. and Kraff, Oliver and Abuelhaija, Ashraf and Fiedler, Thomas M. and Solbach, Klaus and Quick, Harald H. and Ladd, Mark E.},
  title     = {Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI},
  series = {Frontiers in Physics},
  volume    = {5},
  journal   = {Frontiers in Physics},
  number    = {Jun},
  issn      = {2296-424X},
  doi       = {10.3389/fphy.2017.00017},
  year      = {2017},
  language  = {en}
}
@article{FerreinSteinbauer2016,
  author    = {Ferrein, Alexander and Steinbauer, Gerald},
  title     = {The Interplay of Aldebaran and RoboCup},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {30},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-016-0440-1},
  pages     = {325 -- 326},
  year      = {2016},
  language  = {en}
}
@article{SteinbauerFerrein2016,
  author    = {Steinbauer, Gerald and Ferrein, Alexander},
  title     = {20 Years of RoboCup},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {30},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-016-0442-z},
  pages     = {221 -- 224},
  year      = {2016},
  language  = {en}
}
@article{FerreinSteinbauer2016,
  author    = {Ferrein, Alexander and Steinbauer, Gerald},
  title     = {Looking back on 20 Years of RoboCup},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {30},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-016-0443-y},
  pages     = {321 -- 323},
  year      = {2016},
  language  = {en}
}
@incollection{NiemuellerZwillingLakemeyeretal.2017,
  author    = {Niemueller, Tim and Zwilling, Frederik and Lakemeyer, Gerhard and L{\"o}bach, Matthias and Reuter, Sebastian and Jeschke, Sabina and Ferrein, Alexander},
  title     = {Cyber-Physical System Intelligence},
  series = {Industrial Internet of Things},
  booktitle = {Industrial Internet of Things},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-42559-7},
  doi       = {10.1007/978-3-319-42559-7_17},
  pages     = {447 -- 472},
  year      = {2017},
  abstract  = {Cyber-physical systems are ever more common in manufacturing industries. Increasing their autonomy has been declared an explicit goal, for example, as part of the Industry 4.0 vision. To achieve this system intelligence, principled and software-driven methods are required to analyze sensing data, make goal-directed decisions, and eventually execute and monitor chosen tasks. In this chapter, we present a number of knowledge-based approaches to these problems and case studies with in-depth evaluation results of several different implementations for groups of autonomous mobile robots performing in-house logistics in a smart factory. We focus on knowledge-based systems because besides providing expressive languages and capable reasoning techniques, they also allow for explaining how a particular sequence of actions came about, for example, in the case of a failure.},
  language  = {en}
}
@inproceedings{StopforthDavrajhFerrein2017,
  author    = {Stopforth, Riaan and Davrajh, Shaniel and Ferrein, Alexander},
  title     = {South African robotics entity for a collaboration initiative},
  series = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  booktitle = {Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2016},
  publisher = {IEEE},
  isbn      = {978-1-5090-3335-5},
  doi       = {10.1109/RoboMech.2016.7813144},
  pages     = {1 -- 6},
  year      = {2017},
  language  = {en}
}
@article{SchifferFerrein2016,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {Decision-Theoretic Planning with Fuzzy Notions in GOLOG},
  series = {International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems},
  volume    = {24},
  journal   = {International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems},
  number    = {Issue Suppl. 2},
  publisher = {World Scientific},
  address   = {Singapur},
  issn      = {1793-6411},
  doi       = {10.1142/S0218488516400134},
  pages     = {123 -- 143},
  year      = {2016},
  abstract  = {In this paper we present an extension of the action language Golog that allows for using fuzzy notions in non-deterministic argument choices and the reward function in decision-theoretic planning. Often, in decision-theoretic planning, it is cumbersome to specify the set of values to pick from in the non-deterministic-choice-of-argument statement. Also, even for domain experts, it is not always easy to specify a reward function. Instead of providing a finite domain for values in the non-deterministic-choice-of-argument statement in Golog, we now allow for stating the argument domain by simply providing a formula over linguistic terms and fuzzy uents. In Golog's forward-search DT planning algorithm, these formulas are evaluated in order to find the agent's optimal policy. We illustrate this in the Diner Domain where the agent needs to calculate the optimal serving order.},
  language  = {en}
}
@inproceedings{WalentaSchellekensFerreinetal.2017,
  author    = {Walenta, Robert and Schellekens, Twan and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A decentralised system approach for controlling AGVs with ROS},
  series = {AFRICON, Proceedings},
  booktitle = {AFRICON, Proceedings},
  publisher = {IEEE},
  isbn      = {978-1-5386-2775-4},
  issn      = {2153-0033},
  doi       = {10.1109/AFRCON.2017.8095693},
  pages     = {1436 -- 1441},
  year      = {2017},
  language  = {en}
}
@inproceedings{NiemuellerNeumannHenkeetal.2017,
  author    = {Niemueller, Tim and Neumann, Tobias and Henke, Christoph and Sch{\"o}nitz, Sebastian and Reuter, Sebastian and Ferrein, Alexander and Jeschke, Sabina and Lakemeyer, Gerhard},
  title     = {International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League},
  series = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  booktitle = {RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_53},
  pages     = {634 -- 642},
  year      = {2017},
  language  = {en}
}
@inproceedings{ZugNiemuellerHochgeschwenderetal.2017,
  author    = {Zug, Sebastian and Niemueller, Tim and Hochgeschwender, Nico and Seidensticker, Kai and Seidel, Martin and Friedrich, Tim and Neumann, Tobias and Karras, Ulrich and Kraetzschmar, Gerhard K. and Ferrein, Alexander},
  title     = {An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues},
  series = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  booktitle = {RoboCup 2016: Robot World Cup XX. RoboCup 2016.},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-68792-6},
  doi       = {10.1007/978-3-319-68792-6_13},
  pages     = {157 -- 168},
  year      = {2017},
  language  = {en}
}
@inproceedings{MarcoFerrein2017,
  author    = {Marco, Heather G. and Ferrein, Alexander},
  title     = {AGNES: The African-German Network of Excellence in Science},
  series = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  booktitle = {Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017},
  pages     = {1 -- 2},
  year      = {2017},
  language  = {en}
}
@inproceedings{SchifferFerrein2017,
  author    = {Schiffer, Stefan and Ferrein, Alexander},
  title     = {A System Layout for Cognitive Service Robots},
  series = {Cognitive Robot Architectures. Proceedings of EUCognition 2016},
  booktitle = {Cognitive Robot Architectures. Proceedings of EUCognition 2016},
  issn      = {1613-0073},
  pages     = {44 -- 45},
  year      = {2017},
  language  = {en}
}
@book{Huening2018,
  author    = {H{\"u}ning, Felix},
  title     = {Embedded Design For IoT With Renesas Synergy},
  publisher = {Renesas Electronics},
  address   = {D{\"u}sseldorf},
  pages     = {143 S.},
  year      = {2018},
  language  = {en}
}
@inproceedings{HarzheimHeuermann2018,
  author    = {Harzheim, Thomas and Heuermann, Holger},
  title     = {Phase Repeatable Synthesizers as a New Harmonic Phase Standard for Nonlinear Network Analysis},
  series = {IEEE Transactions on Microwave Theory and Techniques},
  booktitle = {IEEE Transactions on Microwave Theory and Techniques},
  publisher = {IEEE},
  doi       = {10.1109/TMTT.2018.2817513},
  pages     = {1 -- 8},
  year      = {2018},
  language  = {en}
}
@inproceedings{SchoppHeuermannMarso2017,
  author    = {Schopp, Christoph and Heuermann, Holger and Marso, Michel},
  title     = {Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet},
  series = {IEEE Transactions on Plasma Science},
  volume    = {45},
  booktitle = {IEEE Transactions on Plasma Science},
  number    = {6},
  publisher = {IEEE},
  issn      = {1939-9375},
  doi       = {10.1109/TPS.2017.2692735},
  pages     = {932 -- 937},
  year      = {2017},
  language  = {en}
}
@inproceedings{StephanHeuermannPrantner2016,
  author    = {Stephan, Achim and Heuermann, Holger and Prantner, Michael},
  title     = {Cutting human tissue with novel atmospheric-pressure microwave plasma jet},
  series = {46th European Microwave Conference (EuMC)},
  booktitle = {46th European Microwave Conference (EuMC)},
  publisher = {IEEE},
  isbn      = {978-2-87487-043-9},
  doi       = {10.1109/EuMC.2016.7824490},
  pages     = {902 -- 905},
  year      = {2016},
  language  = {en}
}