@inproceedings{OhndorfDachwaldSeboldtetal.2011, author = {Ohndorf, Andreas and Dachwald, Bernd and Seboldt, Wolfgang and Schartner, Karl-Heinz}, title = {Flight times to the heliopause using a combination of solar and radioisotope electric propulsion}, series = {32nd International Electric Propulsion Conference}, booktitle = {32nd International Electric Propulsion Conference}, pages = {1 -- 12}, year = {2011}, abstract = {We investigate the interplanetary flight of a low-thrust space probe to the heliopause,located at a distance of about 200 AU from the Sun. Our goal was to reach this distance within the 25 years postulated by ESA for such a mission (which is less ambitious than the 15-year goal set by NASA). Contrary to solar sail concepts and combinations of allistic and electrically propelled flight legs, we have investigated whether the set flight time limit could also be kept with a combination of solar-electric propulsion and a second, RTG-powered upper stage. The used ion engine type was the RIT-22 for the first stage and the RIT-10 for the second stage. Trajectory optimization was carried out with the low-thrust optimization program InTrance, which implements the method of Evolutionary Neurocontrol,using Artificial Neural Networks for spacecraft steering and Evolutionary Algorithms to optimize the Neural Networks' parameter set. Based on a parameter space study, in which the number of thrust units, the unit's specific impulse, and the relative size of the solar power generator were varied, we have chosen one configuration as reference. The transfer time of this reference configuration was 29.6 years and the fastest one, which is technically more challenging, still required 28.3 years. As all flight times of this parameter study were longer than 25 years, we further shortened the transfer time by applying a launcher-provided hyperbolic excess energy up to 49 km2/s2. The resulting minimal flight time for the reference configuration was then 27.8 years. The following, more precise optimization to a launch with the European Ariane 5 ECA rocket reduced the transfer time to 27.5 years. This is the fastest mission design of our study that is flexible enough to allow a launch every year. The inclusion of a fly-by at Jupiter finally resulted in a flight time of 23.8 years,which is below the set transfer-time limit. However, compared to the 27.5-year transfer,this mission design has a significantly reduced launch window and mission flexibility if the escape direction is restricted to the heliosphere's "nose".}, language = {en} } @inproceedings{SchmidtKaschEichleretal.2021, author = {Schmidt, Thomas and Kasch, Susanne and Eichler, Fabian and Thurn, Laura}, title = {Process strategies on laser-based melting of glass powder}, series = {LiM 2021 proceedings}, booktitle = {LiM 2021 proceedings}, pages = {10 Seiten}, year = {2021}, abstract = {This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component's material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.}, language = {en} } @inproceedings{BorggraefeDachwald2010, author = {Borggr{\"a}fe, Andreas and Dachwald, Bernd}, title = {Mission performance evaluation for solar sails using a refined SRP force model with variable optical coefficients}, series = {2nd International Symposium on Solar Sailing}, booktitle = {2nd International Symposium on Solar Sailing}, pages = {1 -- 6}, year = {2010}, abstract = {Solar sails provide ignificant advantages over other low-thrust propulsion systems because they produce thrust by the momentum exchange from solar radiation pressure (SRP) and thus do not consume any propellant.The force exerted on a very thin sail foil basically depends on the light incidence angle. Several analytical SRP force models that describe the SRP force acting on the sail have been established since the 1970s. All the widely used models use constant optical force coefficients of the reflecting sail material. In 2006,MENGALI et al. proposed a refined SRP force model that takes into account the dependancy of the force coefficients on the light incident angle,the sail's distance from the sun (and thus the sail emperature) and the surface roughness of the sail material [1]. In this paper, the refined SRP force model is compared to the previous ones in order to identify the potential impact of the new model on the predicted capabilities of solar sails in performing low-cost interplanetary space missions. All force models have been implemented within InTrance, a global low-thrust trajectory optimization software utilizing evolutionary neurocontrol [2]. Two interplanetary rendezvous missions, to Mercury and the near-Earth asteroid 1996FG3, are investigated. Two solar sail performances in terms of characteristic acceleration are examined for both scenarios, 0.2 mm/s2 and 0.5 mm/s2, termed "low" and "medium" sail performance. In case of the refined SRP model, three different values of surface roughness are chosen, h = 0 nm, 10 nm and 25 nm. The results show that the refined SRP force model yields shorter transfer times than the standard model.}, language = {en} } @article{JablonskiPoghossianKeusgenetal.2021, author = {Jablonski, Melanie and Poghossian, Arshak and Keusgen, Michael and Wege, Christina and Sch{\"o}ning, Michael Josef}, title = {Detection of plant virus particles with a capacitive field-effect sensor}, series = {Analytical and Bioanalytical Chemistry}, volume = {413}, journal = {Analytical and Bioanalytical Chemistry}, publisher = {Springer Nature}, address = {Cham}, issn = {1618-2650}, doi = {10.1007/s00216-021-03448-8}, pages = {5669 -- 5678}, year = {2021}, abstract = {Plant viruses are major contributors to crop losses and induce high economic costs worldwide. For reliable, on-site and early detection of plant viral diseases, portable biosensors are of great interest. In this study, a field-effect SiO2-gate electrolyte-insulator-semiconductor (EIS) sensor was utilized for the label-free electrostatic detection of tobacco mosaic virus (TMV) particles as a model plant pathogen. The capacitive EIS sensor has been characterized regarding its TMV sensitivity by means of constant-capacitance method. The EIS sensor was able to detect biotinylated TMV particles from a solution with a TMV concentration as low as 0.025 nM. A good correlation between the registered EIS sensor signal and the density of adsorbed TMV particles assessed from scanning electron microscopy images of the SiO2-gate chip surface was observed. Additionally, the isoelectric point of the biotinylated TMV particles was determined via zeta potential measurements and the influence of ionic strength of the measurement solution on the TMV-modified EIS sensor signal has been studied.}, language = {en} } @article{RichterBraunsteinStaeudleetal.2021, author = {Richter, Charlotte and Braunstein, Bjoern and Staeudle, Benjamin and Attias, Julia and Suess, Alexander and Weber, Tobias and Mileva, Katya N. and Rittweger, Joern and Green, David A. and Albracht, Kirsten}, title = {Contractile behavior of the gastrocnemius medialis muscle during running in simulated hypogravity}, series = {npj Microgravity}, volume = {7}, journal = {npj Microgravity}, number = {Article number: 32}, publisher = {Springer Nature}, address = {New York}, issn = {2373-8065}, doi = {10.1038/s41526-021-00155-7}, pages = {7 Seiten}, year = {2021}, abstract = {Vigorous exercise countermeasures in microgravity can largely attenuate muscular degeneration, albeit the extent of applied loading is key for the extent of muscle wasting. Running on the International Space Station is usually performed with maximum loads of 70\% body weight (0.7 g). However, it has not been investigated how the reduced musculoskeletal loading affects muscle and series elastic element dynamics, and thereby force and power generation. Therefore, this study examined the effects of running on the vertical treadmill facility, a ground-based analog, at simulated 0.7 g on gastrocnemius medialis contractile behavior. The results reveal that fascicle-series elastic element behavior differs between simulated hypogravity and 1 g running. Whilst shorter peak series elastic element lengths at simulated 0.7 g appear to be the result of lower muscular and gravitational forces acting on it, increased fascicle lengths and decreased velocities could not be anticipated, but may inform the development of optimized running training in hypogravity. However, whether the alterations in contractile behavior precipitate musculoskeletal degeneration warrants further study.}, language = {en} } @inproceedings{SchartnerLoebDachwaldetal.2009, author = {Schartner, Karl-Heinz and Loeb, H. W. and Dachwald, Bernd and Ohndorf, Andreas}, title = {Perspectives of electric propulsion for outer planetary and deep space missions}, series = {European Planetary Science Congress 2009}, booktitle = {European Planetary Science Congress 2009}, pages = {416 -- 416}, year = {2009}, abstract = {Solar-electric propulsion (SEP) is superior with respect to payload capacity, flight time and flexible launch window to the conventional interplanetary transfer method using chemical propulsion combined with gravity assists. This fact results from the large exhaust velocities of electric low-thrust propulsion and is favourable also for missions to the giant planets, Kuiper-belt objects and even for a heliopause probe (IHP) as shown in three studies by the authors funded by DLR. They dealt with a lander for Europa and a sample return mission from a mainbelt asteroid [1], with the TANDEM mission [2]; the third recent one investigates electric propulsion for the transfer to the edge of the solar system. All studies are based on triple-junction solar arrays, on rf-ion thrusters of the qualified RIT-22 type and they use the intelligent trajectory optimization program InTrance [3].}, language = {en} } @inproceedings{Dachwald2004, author = {Dachwald, Bernd}, title = {Solar sail performance requirements for missions to the outer solar system and beyond}, series = {55th International Astronautical Congress 2004}, booktitle = {55th International Astronautical Congress 2004}, doi = {10.2514/6.IAC-04-S.P.11}, pages = {1 -- 9}, year = {2004}, abstract = {Solar sails enable missions to the outer solar system and beyond, although the solar radiation pressure decreases with the square of solar distance. For such missions, the solar sail may gain a large amount of energy by first making one or more close approaches to the sun. Within this paper, optimal trajectories for solar sail missions to the outer planets and into near interstellar space (200 AU) are presented. Thereby, it is shown that even near/medium-term solar sails with relatively moderate performance allow reasonable transfer times to the boundaries of the solar system.}, language = {en} } @article{GollandEngling2014, author = {Golland, Alexander and Engling, Christoph}, title = {a-i3/BSI Symposium 2014: Sicherheit von Daten und Identit{\"a}ten angesichts NSA und Big Data}, series = {DSB Datenschutz-Berater}, volume = {38}, journal = {DSB Datenschutz-Berater}, number = {7-8}, publisher = {DFV Mediengruppe}, address = {Frankfurt a.M.}, isbn = {0170-7256}, pages = {165 -- 166}, year = {2014}, language = {de} } @misc{OhrtmannGolland2020, author = {Ohrtmann, Jan-Peter and Golland, Alexander}, title = {Daten- und Privatsph{\"a}reschutz im Wandel der 2020er-Jahre}, pages = {33 -- 38}, year = {2020}, language = {de} } @masterthesis{Kiutsukis2021, type = {Bachelor Thesis}, author = {Kiutsukis, Maria}, title = {KOMU: Entwicklung eines modularen Regalsystems}, publisher = {FH Aachen}, address = {Aachen}, pages = {213 Seiten}, year = {2021}, abstract = {KOMU entstand durch Analysieren der Ver{\"a}nderungen, die mit der Urbanisierung einhergehen - schnell schwindender Wohnraum, h{\"a}ufiges Umziehen und verschmolzene Raumnutzung. KOMU ist ein modulares Regalsystem, das erm{\"o}glicht, problemlos aus denselben Bestandteilen immer wieder verschiedene Wohn- und Raumsituationen zu schaffen. Das System ist komplett werkzeugfrei durch simples Ineinanderstecken aufzubauen. Weitere Add-Ons k{\"o}nnen {\"u}ber das gleiche Stecksystem in das Regal integriert werden, damit es perfekt an die Bed{\"u}rfnisse des Kunden anpasst werden kann. Durch klare Linien und eine cleane Designsprache f{\"u}gt sich KOMU nahtlos in seine Umgebung ein und hilft, eine f{\"u}r den Kunden ideale Umgebung zu schaffen. Ein Regal, das mitw{\"a}chst - vielf{\"a}ltig und individuell.}, language = {de} } @masterthesis{Mauve2021, type = {Bachelor Thesis}, author = {Mauve, Ira}, title = {YOKU: Ein Therapieprodukt f{\"u}r Fasziale Verklebungen und Muskel- Skelett-Erkrankungen.}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {125 Seiten}, year = {2021}, abstract = {Yocu ist ein Konzept f{\"u}r den Gesundheitssektor, dass unter der Betrachtung der relevanten Trends und der Researchergebnisse den Therapieansatz des „Schr{\"o}pfen" in einen neuen modernen Kontext setzt, dabei aber die Vorteile der traditionellen Heilkunst nicht außer Acht l{\"a}sst. Es handelt sich um ein Therapieprodukt f{\"u}r fasziale Verklebungen und Muskel-Skelett-Erkrankungen. Mit Yocu bekommen Nutzer die M{\"o}glichkeit, sich selbst erfolgreich pr{\"a}ventiv oder bei Beschwerden zu behandeln. Das k{\"o}nnte nicht nur die k{\"o}rperliche Gesundheit f{\"o}rdern, sondern auch das Gesp{\"u}r f{\"u}r den eigenen K{\"o}rper. Seine k{\"o}rperlichen Bed{\"u}rfnisse besser einsch{\"a}tzen zu k{\"o}nnen und in der Lage zu sein, diese zu erf{\"u}llen, stellt das Ziel des Konzepts dar. Mit dem gew{\"a}hlten „Healthtech" Ansatz soll der Zugang zur Selbsttherapie f{\"u}r Laien erm{\"o}glicht werden. Zus{\"a}tzlich k{\"o}nnte das Konzept die Arbeit f{\"u}r Physiotherapeut:innen und Fitnesstrainer:innen erleichtern. Durch die Symbiose eines elektronischen Therapieproduktes mit einer Anwendungsapp ist die Behandlung punktgenau steuerbar und basiert nicht mehr ausschließlich auf Gef{\"u}hl oder Erfahrung. Durch die Einsicht aller wichtigen Parameter, wird das Verst{\"a}ndnis der Therapiemethode gef{\"o}rdert und Vertrauen hinsichtlich des Produkts geschaffen.}, language = {de} } @masterthesis{MeinersSchneider2021, type = {Bachelor Thesis}, author = {Meiners, Sonja and Schneider, Sophie}, title = {MULO - Multifunktionale Objekte: Eine Serie multifunktionaler Wohnobjekte}, publisher = {FH Aachen}, address = {Aachen}, pages = {137 Seiten}, year = {2021}, abstract = {Mit MULO wurde eine Serie multifunktionaler Objekte f{\"u}r den Wohnbereich entworfen. In Zeiten des {\"U}berangebots und des st{\"a}ndigen Wohnraumwechsels soll der Nutzer dieser Objekte mit einem modernen und schlichten Design unterst{\"u}tzt werden, das zu jedem Anlass passt. Die minimalistische {\"A}sthetik mit hohem Komfort orientiert sich dabei an den Bed{\"u}rfnissen des Endverbrauchers. Als Verwandlungsk{\"u}nstler bereichert MULO jeden Wohnraum. Die gesamte Serie ist unter der Ber{\"u}cksichtigung der schnelllebigen und sich wandelnden Welt entworfen worden. Mit multifunktionalen Objekten ist das Produkt den flexiblen Anforderungen und Bed{\"u}rfnissen des Menschen gewachsen. Die Bereiche Wohnen, Leben, Arbeiten, Schlafen und Entspannen werden durch das Sofa- , das Tisch- und das Keramik-System optimal abgedeckt. Durch die Verwendung von nachhaltigen und recycelbaren Materialien, setzt MULO ein kleines Statement und hinterl{\"a}sst nachhaltig Eindruck.}, language = {de} } @masterthesis{Niederschmidt2021, type = {Bachelor Thesis}, author = {Niederschmidt, S{\"o}ren}, title = {Living product: ein Ansatz, lebendige Organismen mit einem Produkt zu vereinen und nutzbar zu machen}, publisher = {FH Aachen}, address = {Aachen}, pages = {57 Seiten}, year = {2021}, abstract = {Diese Arbeit setzt sich mit der Frage auseinander, in welcher Form sich lebendige Organismen - hier insbesondere Pilze - in die Produktwelt integrieren lassen. In welcher Art und Weise beeinflusst ein Organismus das Produkterlebnis? Im Rahmen dieser Arbeit sind vier verschiedene Produkte entstanden, die die St{\"a}rken des Materials Myzelium demonstrieren. Myzelium bezeichnet das sehr dichte Wurzelnetzwerk eines Pilzes. Dieses lebendige Netzwerk kann dazu genutzt werden, um organische Stoffe miteinander zu verwachsen und somit Formen entstehen zu lassen. Die so entstandenen Produkte sind in eine Konzeptumgebung eingebettet, in der der Verbrauchende die Natur durch naturn{\"a}here Produkte (Form, Material und gewachsene Strukturen) neu erlebt. Gezeigt wird ein Packaging f{\"u}r Einmachgl{\"a}ser, ein Kressebeet, ein Wandregal und ein Teelicht.}, language = {de} } @masterthesis{Schrey2021, type = {Bachelor Thesis}, author = {Schrey, Leander}, title = {Less Waste Shelf: Ein M{\"o}bel zur Reduzierung der h{\"a}uslich anfallenden Lebensmittelabf{\"a}lle}, publisher = {FH Aachen}, address = {Aachen}, pages = {177 Seiten}, year = {2021}, abstract = {Mit dem Projekt wird sich dem Problem der weltweiten Lebensmittelverschwendung angenommen und versucht Abf{\"a}lle in Privathaushalten prim{\"a}r industrialisierter Staaten zu reduzieren. Mit j{\"a}hrlich 1,3 Milliarden Tonnen landet circa ein Drittel aller weltweit produzierten Lebensmittel im M{\"u}ll. Einen Großteil dieser Abf{\"a}lle ist vermeidbar, besonders dort, wo man im {\"U}berfluss lebt. Das konzipierte M{\"o}belst{\"u}ck soll die Lagerungsm{\"o}glichkeiten des Nutzers optimieren und somit f{\"u}r die Wertsch{\"a}tzung von Lebensmitteln sensibilisieren. F{\"u}r das M{\"o}belst{\"u}ck werden ausschließlich nat{\"u}rliche Materialien verwendet, welche in ihrer Charakteristik optimal zum Funktionsumfang passen, der f{\"u}r die Lagerung ben{\"o}tigt wird. Das Material Terracotta erm{\"o}glicht es, mittels Verdunstungsk{\"u}hlung stromlos Gem{\"u}se kalt zu halten. Antibakterielles Holz t{\"o}tet sch{\"a}dliche Bakterien ab. Die Konstruktion erm{\"o}glicht somit eine fachgerechte Lebensmittelagerung und erm{\"o}glicht sowohl sehr flexible Nutzung, wie auch leichte Reparatur.}, language = {de} } @masterthesis{Thomaschik2021, type = {Bachelor Thesis}, author = {Thomaschik, Annika}, title = {Medical Design for Kids: Integration der Bed{\"u}rfnisse von Kindern in medizinische Produkte}, publisher = {FH Aachen}, address = {Aachen}, school = {Fachhochschule Aachen}, pages = {122 Seiten}, year = {2021}, abstract = {Kinder im Kontext von medizinischen Einrichtungen. Kinder sind keine kleinen Erwachsenen und erfordern einen auf sie angepassten Zugang zu medizinischen Behandlungsabl{\"a}ufen. Das Konzept basiert auf dem Gestaltungsprinzip des „Child Centered Design" mit Befragungen von Experten der P{\"a}diatrie und Forschung sowie mit enger Zusammenarbeit mit Kindern. Entstanden ist ein Produkt welches Skepsis und Angst junger Patienten im Alter von 6 bis 14 Jahren bei station{\"a}ren Aufenthalten in Krankenh{\"a}usern mindert und ihren Heilungsprozess positiv unterst{\"u}tzt. Unter Einbezug von digitalen M{\"o}glichkeiten wie Augmented Reality erkl{\"a}rt „ViU", ein Krankenhaus-Companion in Eulen-Optik, den kleinen Patienten Funktionen und das Wirken verschiedenster medizinischer Ger{\"a}te und Behandlungen. So wird nicht nur der Rate an Traumata durch Krankenhausaufenthalte bei Kindern entgegengewirkt, sondern auch das Krankenhauspersonal im Umgang mit Kindern im Klinikalltag entlastet.}, language = {de} } @masterthesis{Zaunbrecher2021, type = {Bachelor Thesis}, author = {Zaunbrecher, Fabienne}, title = {Living Spaces - By OASE: Konzeption eines Flagship-Stores mit Wohlf{\"u}hl- und Erlebnis-Spaces}, publisher = {FH Aachen}, address = {Aachen}, pages = {175 Seiten}, year = {2021}, abstract = {Konzeption eines Flagship-Stores mit Wohlf{\"u}hl- und Erlebnis-Spaces Die Bed{\"u}rfnisse von Besuchern und Kunden eines Gesch{\"a}fts haben sich {\"u}ber die letzten Jahre stark ver{\"a}ndert. Sie m{\"o}chten das ihr Kauf zum Erlebnis wird. Auf Basis dieser Erkenntnis wurde im Rahmen dieser Arbeit zusammen mit den Produkten des Weltmarktf{\"u}hrers f{\"u}r Teichtechnik und Aquaristik „OASE - Living Water" ein Storekonzept geschaffen. Dieses verbindet den Verkaufsraum mit unterschiedlichen Erlebniswelten, welche auf die jeweilig ausgestellte Produktkategorie abgestimmt sind. Zus{\"a}tzlich er{\"o}ffnet ein diverser und aufregend gestalteter Gartenbereich der zum Entspannen und Verweilen einl{\"a}dt. Der herausstechende Aspekt des Konzepts ist, dass die Produkte sowohl als reines Produkt, als auch in verbauter Version in Aktion zu sehen sind. Auf diese Art bietet die Marke „OASE - Living Water" ein neues Kauf-Erlebnis an.}, language = {de} } @inproceedings{KronigerHorikawaFunkeetal.2021, author = {Kroniger, Daniel and Horikawa, Atsushi and Funke, Harald and Pf{\"a}ffle, Franziska}, title = {Numerical investigation of micromix hydrogen flames at different combustor pressure levels}, series = {The Proceedings of the International Conference on Power Engineering (ICOPE)}, booktitle = {The Proceedings of the International Conference on Power Engineering (ICOPE)}, doi = {10.1299/jsmeicope.2021.15.2021-0237}, pages = {4 Seiten}, year = {2021}, abstract = {This study investigates the influence of pressure on the temperature distribution of the micromix (MMX) hydrogen flame and the NOx emissions. A steady computational fluid dynamic (CFD) analysis is performed by simulating a reactive flow with a detailed chemical reaction model. The numerical analysis is validated based on experimental investigations. A quantitative correlation is parametrized based on the numerical results. We find, that the flame initiation point shifts with increasing pressure from anchoring behind a downstream located bluff body towards anchoring upstream at the hydrogen jet. The numerical NOx emissions trend regarding to a variation of pressure is in good agreement with the experimental results. The pressure has an impact on both, the residence time within the maximum temperature region and on the peak temperature itself. In conclusion, the numerical model proved to be adequate for future prototype design exploration studies targeting on improving the operating range.}, language = {en} } @inproceedings{HorikawaOkadaYamaguchietal.2021, author = {Horikawa, Atsushi and Okada, Kunio and Yamaguchi, Masato and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten}, title = {Combustor development and engine demonstration of micro-mix hydrogen combustion applied to M1A-17 gas turbine}, series = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3B: Combustion, Fuels, and Emissions}, booktitle = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3B: Combustion, Fuels, and Emissions}, doi = {10.1115/GT2021-59666}, pages = {13 Seiten}, year = {2021}, abstract = {Kawasaki Heavy Industries, LTD. (KHI) has research and development projects for a future hydrogen society. These projects comprise the complete hydrogen cycle, including the production of hydrogen gas, the refinement and liquefaction for transportation and storage, and finally the utilization in a gas turbine for electricity and heat supply. Within the development of the hydrogen gas turbine, the key technology is stable and low NOx hydrogen combustion, namely the Dry Low NOx (DLN) hydrogen combustion. KHI, Aachen University of Applied Science, and B\&B-AGEMA have investigated the possibility of low NOx micro-mix hydrogen combustion and its application to an industrial gas turbine combustor. From 2014 to 2018, KHI developed a DLN hydrogen combustor for a 2MW class industrial gas turbine with the micro-mix technology. Thereby, the ignition performance, the flame stability for equivalent rotational speed, and higher load conditions were investigated. NOx emission values were kept about half of the Air Pollution Control Law in Japan: 84ppm (O2-15\%). Hereby, the elementary combustor development was completed. From May 2020, KHI started the engine demonstration operation by using an M1A-17 gas turbine with a co-generation system located in the hydrogen-fueled power generation plant in Kobe City, Japan. During the first engine demonstration tests, adjustments of engine starting and load control with fuel staging were investigated. On 21st May, the electrical power output reached 1,635 kW, which corresponds to 100\% load (ambient temperature 20 °C), and thereby NOx emissions of 65 ppm (O2-15, 60 RH\%) were verified. Here, for the first time, a DLN hydrogen-fueled gas turbine successfully generated power and heat.}, language = {en} } @inproceedings{KronigerHorikawaFunkeetal.2021, author = {Kroniger, Daniel and Horikawa, Atsushi and Funke, Harald and Pf{\"a}ffle, Franziska and Kishimoto, Tsuyoshi and Okada, Koichi}, title = {Experimental and numerical investigation on the effect of pressure on micromix hydrogen combustion}, series = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3A: Combustion, Fuels, and Emissions}, booktitle = {Conference Proceedings Turbo Expo: Power for Land, Sea and Air, Volume 3A: Combustion, Fuels, and Emissions}, publisher = {ASME}, address = {New York, NY}, doi = {10.1115/GT2021-58926}, pages = {11 Seiten}, year = {2021}, abstract = {The micromix (MMX) combustion concept is a DLN gas turbine combustion technology designed for high hydrogen content fuels. Multiple non-premixed miniaturized flames based on jet in cross-flow (JICF) are inherently safe against flashback and ensure a stable operation in various operative conditions. The objective of this paper is to investigate the influence of pressure on the micromix flame with focus on the flame initiation point and the NOx emissions. A numerical model based on a steady RANS approach and the Complex Chemistry model with relevant reactions of the GRI 3.0 mechanism is used to predict the reactive flow and NOx emissions at various pressure conditions. Regarding the turbulence-chemical interaction, the Laminar Flame Concept (LFC) and the Eddy Dissipation Concept (EDC) are compared. The numerical results are validated against experimental results that have been acquired at a high pressure test facility for industrial can-type gas turbine combustors with regard to flame initiation and NOx emissions. The numerical approach is adequate to predict the flame initiation point and NOx emission trends. Interestingly, the flame shifts its initiation point during the pressure increase in upstream direction, whereby the flame attachment shifts from anchoring behind a downstream located bluff body towards anchoring directly at the hydrogen jet. The LFC predicts this change and the NOx emissions more accurately than the EDC. The resulting NOx correlation regarding the pressure is similar to a non-premixed type combustion configuration.}, language = {en} } @inproceedings{HandschuhStollenwerkBorchert2021, author = {Handschuh, Nils and Stollenwerk, Dominik and Borchert, J{\"o}rg}, title = {Operation of thermal storage power plants under high renewable grid penetration}, series = {NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems}, booktitle = {NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems}, publisher = {VDE Verlag}, address = {Berlin}, isbn = {978-3-8007-5651-3}, pages = {261 -- 265}, year = {2021}, abstract = {The planned coal phase-out in Germany by 2038 will lead to the dismantling of power plants with a total capacity of approx. 30 GW. A possible further use of these assets is the conversion of the power plants to thermal storage power plants; the use of these power plants on the day-ahead market is considerably limited by their technical parameters. In this paper, the influence of the technical boundary conditions on the operating times of these storage facilities is presented. For this purpose, the storage power plants were described as an MILP problem and two price curves, one from 2015 with a relatively low renewable penetration (33 \%) and one from 2020 with a high renewable energy penetration (51 \%) are compared. The operating times were examined as a function of the technical parameters and the critical influencing factors were investigated. The thermal storage power plant operation duration and the energy shifted with the price curve of 2020 increases by more than 25 \% compared to 2015.}, language = {en} }