@article{CheenakulaGriebelMontagetal.2023, author = {Cheenakula, Dheeraja and Griebel, Kai and Montag, David and Gr{\"o}mping, Markus}, title = {Concept development of a mainstream deammonification and comparison with conventional process in terms of energy, performance and economical construction perspectives}, series = {Frontiers in Microbiology}, volume = {14}, journal = {Frontiers in Microbiology}, number = {11155235}, editor = {Huang, Xiaowu}, publisher = {Frontiers}, issn = {1664-302X}, doi = {10.3389/fmicb.2023.1155235}, pages = {1 -- 15}, year = {2023}, abstract = {Deammonification for nitrogen removal in municipal wastewater in temperate and cold climate zones is currently limited to the side stream of municipal wastewater treatment plants (MWWTP). This study developed a conceptual model of a mainstream deammonification plant, designed for 30,000 P.E., considering possible solutions corresponding to the challenging mainstream conditions in Germany. In addition, the energy-saving potential, nitrogen elimination performance and construction-related costs of mainstream deammonification were compared to a conventional plant model, having a single-stage activated sludge process with upstream denitrification. The results revealed that an additional treatment step by combining chemical precipitation and ultra-fine screening is advantageous prior the mainstream deammonification. Hereby chemical oxygen demand (COD) can be reduced by 80\% so that the COD:N ratio can be reduced from 12 to 2.5. Laboratory experiments testing mainstream conditions of temperature (8-20°C), pH (6-9) and COD:N ratio (1-6) showed an achievable volumetric nitrogen removal rate (VNRR) of at least 50 gN/(m3∙d) for various deammonifying sludges from side stream deammonification systems in the state of North Rhine-Westphalia, Germany, where m3 denotes reactor volume. Assuming a retained Norganic content of 0.0035 kgNorg./(P.E.∙d) from the daily loads of N at carbon removal stage and a VNRR of 50 gN/(m3∙d) under mainstream conditions, a resident-specific reactor volume of 0.115 m3/(P.E.) is required for mainstream deammonification. This is in the same order of magnitude as the conventional activated sludge process, i.e., 0.173 m3/(P.E.) for an MWWTP of size class of 4. The conventional plant model yielded a total specific electricity demand of 35 kWh/(P.E.∙a) for the operation of the whole MWWTP and an energy recovery potential of 15.8 kWh/(P.E.∙a) through anaerobic digestion. In contrast, the developed mainstream deammonification model plant would require only a 21.5 kWh/(P.E.∙a) energy demand and result in 24 kWh/(P.E.∙a) energy recovery potential, enabling the mainstream deammonification model plant to be self-sufficient. The retrofitting costs for the implementation of mainstream deammonification in existing conventional MWWTPs are nearly negligible as the existing units like activated sludge reactors, aerators and monitoring technology are reusable. However, the mainstream deammonification must meet the performance requirement of VNRR of about 50 gN/(m3∙d) in this case.}, language = {en} } @article{KleefeldZimmermann2022, author = {Kleefeld, Andreas and Zimmermann, M.}, title = {Computing Elastic Interior Transmission Eigenvalues}, series = {Integral Methods in Science and Engineering}, journal = {Integral Methods in Science and Engineering}, editor = {Constanda, Christian and Bodmann, Bardo E.J. and Harris, Paul J.}, publisher = {Birkh{\"a}user}, address = {Cham}, isbn = {978-3-031-07171-3}, doi = {10.1007/978-3-031-07171-3_10}, pages = {139 -- 155}, year = {2022}, abstract = {An alternative method is presented to numerically compute interior elastic transmission eigenvalues for various domains in two dimensions. This is achieved by discretizing the resulting system of boundary integral equations in combination with a nonlinear eigenvalue solver. Numerical results are given to show that this new approach can provide better results than the finite element method when dealing with general domains.}, language = {en} } @article{PietschTeubner1993, author = {Pietsch, Wolfram and Teubner, A.}, title = {Computerunterst{\"u}tzung f{\"u}r die dezentrale Außendienstarbeit / Pietsch, W. , Teubner, A.}, series = {IM : die Fachzeitschrift f{\"u}r Information Management \& Consulting (1993)}, journal = {IM : die Fachzeitschrift f{\"u}r Information Management \& Consulting (1993)}, isbn = {0930-5181, 1616-1017}, pages = {22 -- 29}, year = {1993}, language = {de} } @article{Grap1988, author = {Grap, Rolf Dietmar}, title = {Computersimulationsmodelle zur Qualifizierung und Beurteilung von F{\"u}hrungskr{\"a}ften}, series = {Jahresdokumentation ... der Gesellschaft f{\"u}r Arbeitswissenschaft e.V..}, journal = {Jahresdokumentation ... der Gesellschaft f{\"u}r Arbeitswissenschaft e.V..}, publisher = {Schmidt}, address = {K{\"o}ln}, year = {1988}, language = {de} } @article{LaumannKindmann2004, author = {Laumann, J{\"o}rg and Kindmann, Rolf}, title = {Computerorientierte L{\"o}sung von Stabilit{\"a}ts¬problemen im Bauwesen / Kindmann, R. ; Laumann, J.}, series = {Computer im Bauwesen : Festschrift zum 60. Geburtstag von Prof. Hartmann / Karlheinz Lehner (Hrsg.)}, journal = {Computer im Bauwesen : Festschrift zum 60. Geburtstag von Prof. Hartmann / Karlheinz Lehner (Hrsg.)}, publisher = {Shaker}, address = {Aachen}, isbn = {3-8322-2478-5}, pages = {15 -- 24}, year = {2004}, language = {de} } @article{Grap1995, author = {Grap, Rolf Dietmar}, title = {Computermodelle f{\"u}r Unternehmungsspiele}, series = {Planspiele im Personal- und Organisationsmanagement / hrsg. von Thomas Geilhardt ...}, journal = {Planspiele im Personal- und Organisationsmanagement / hrsg. von Thomas Geilhardt ...}, publisher = {Verl. f{\"u}r Angewandte Psychologie}, address = {G{\"o}ttingen}, isbn = {3-87844-079-0}, pages = {249 -- 260}, year = {1995}, language = {de} } @article{WolfSimonSchlick1997, author = {Wolf, Martin R. and Simon, S. and Schlick, Christopher}, title = {Computergest{\"u}tzte Kooperation - Eine Seifenblase? / Wolf, M.; Simon, S.; Schlick, C.}, series = {Rechnergest{\"u}tzte Kooperation in Verwaltungen und großen Unternehmen : Tagungsband zum Workshop der GI-Gachgruppe / Peter Mambrey ... ( Hrsg.)}, journal = {Rechnergest{\"u}tzte Kooperation in Verwaltungen und großen Unternehmen : Tagungsband zum Workshop der GI-Gachgruppe / Peter Mambrey ... ( Hrsg.)}, publisher = {Univ., Fachbereich Mathematik u. Informatik}, address = {Essen}, pages = {220 -- 234}, year = {1997}, language = {de} } @article{Hirschberg1994, author = {Hirschberg, Rainer}, title = {Computer-Aided-Engineering in der TGA}, series = {Stadt- und Geb{\"a}udetechnik (1994)}, journal = {Stadt- und Geb{\"a}udetechnik (1994)}, isbn = {0038-898X}, pages = {16 -- 17}, year = {1994}, language = {de} } @article{Hirschberg1994, author = {Hirschberg, Rainer}, title = {Computer-Aided-Engineering in der Technischen Geb{\"a}udeausr{\"u}stung}, series = {computer spezial (1994)}, journal = {computer spezial (1994)}, pages = {32 -- 37}, year = {1994}, language = {en} } @article{GrotendorstDornseiffer2000, author = {Grotendorst, Johannes and Dornseiffer, J{\"u}rgen}, title = {Computer-aided Modelling and Simulation of the Thermodynamics of Steam Reforming / Grotendorst, Johannes ; Dornseiffer, J{\"u}rgen}, series = {Mathematics and Computers in Simulation. 51 (2000), H. 5}, journal = {Mathematics and Computers in Simulation. 51 (2000), H. 5}, isbn = {0378-4754}, pages = {451 -- 471}, year = {2000}, language = {en} } @article{Grap1990, author = {Grap, Rolf Dietmar}, title = {Computer verstehen lernen : Grafische Simulation rechnerinterner Abl{\"a}ufe als Qualifizierungsmittel}, series = {Industrie-Anzeiger. 112 (1990), H. 53/54}, journal = {Industrie-Anzeiger. 112 (1990), H. 53/54}, isbn = {0019-9036}, year = {1990}, language = {de} } @article{WolfLuczak1999, author = {Wolf, Martin R. and Luczak, Holger}, title = {Computer Supported Communication and Cooperation - Making Information Aware / Luczak, H. ; Wolf, M.}, series = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999}, journal = {Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999}, publisher = {Erlbaum}, address = {Mahwah, NJ}, pages = {298 -- 302}, year = {1999}, language = {en} } @article{HagerHentschkeHojdisetal.2015, author = {Hager, Jonathan and Hentschke, Reinhard and Hojdis, Nils and Karimi-Varzaneh, Hossein Ali}, title = {Computer Simulation of Particle-Particle Interaction in a Model Polymer Nanocomposite}, series = {Macromolecules}, volume = {48}, journal = {Macromolecules}, number = {24}, issn = {1520-5835}, doi = {10.1021/acs.macromol.5b01864}, pages = {9039 -- 9049}, year = {2015}, language = {en} } @article{HollerButenwegNohetal.2004, author = {Holler, S. and Butenweg, Christoph and Noh, S.-Y. and Meskouris, Konstantin}, title = {Computational model of textile-reinforced concrete structures}, series = {Computers \& structures : an international journal}, volume = {Volume 82}, journal = {Computers \& structures : an international journal}, number = {Issues 23-26}, issn = {1879-2243 (E-Journal); 0045-7949 (Print)}, doi = {10.1016/j.compstruc.2004.03.076}, pages = {1971 -- 1979}, year = {2004}, language = {en} } @article{HueningEifertHandricketal.2006, author = {H{\"u}ning, Felix and Eifert, T. and Handrick, K. and Neuhausen, U.}, title = {Computational Magnetochemistry: Complementary Quantum Mechanical Tools / Eifert, T. ; Handrick, K. ; H{\"u}ning, F. ; Neuhausen, U. ; Schilder, H. ; Lueken, H.}, series = {Zeitschrift f{\"u}r Anorganische und Allgemeine Chemie (ZAAC) - Journal of Inorganic and General Chemistry . 632 (2006), H. 4}, journal = {Zeitschrift f{\"u}r Anorganische und Allgemeine Chemie (ZAAC) - Journal of Inorganic and General Chemistry . 632 (2006), H. 4}, publisher = {-}, isbn = {1521-3749}, pages = {521 -- 529}, year = {2006}, language = {en} } @article{HueningEifertHandricketal.2006, author = {H{\"u}ning, Felix and Eifert, T. and Handrick, K. and Neuhausen, U.}, title = {Computational Magnetochemistry: Complementary Quantum Mechanical Tools / Eifert, T. ; Handrick, K. ; H{\"u}ning, F. ; Neuhausen, U. ; Schilder, H. ; Lueken, H.}, series = {20 Jahre Wilhelm-Klemm-Stiftung / Kuratorium der Wilhelm-Klemm-Stiftung (Hrsg.)}, journal = {20 Jahre Wilhelm-Klemm-Stiftung / Kuratorium der Wilhelm-Klemm-Stiftung (Hrsg.)}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8322-5520-6}, pages = {193ff}, year = {2006}, language = {en} } @article{FrotscherKochStaat2015, author = {Frotscher, Ralf and Koch, Jan-Peter and Staat, Manfred}, title = {Computational investigation of drug action on human-induced stem cell derived cardiomyocytes}, series = {Journal of biomechanical engineering}, volume = {Vol. 137}, journal = {Journal of biomechanical engineering}, number = {iss. 7}, publisher = {ASME}, address = {New York}, issn = {1528-8951 (E-Journal); 0148-0731 (Print)}, doi = {10.1115/1.4030173}, pages = {071002-1 -- 071002-7}, year = {2015}, language = {en} } @article{AlexopoulosBreitbachHoffschmidtetal.2008, author = {Alexopoulos, Spiros and Breitbach, Gerd and Hoffschmidt, Bernhard and Stobbe, P.}, title = {Computational fluid flow of porous resic ceramic filtering modules and optimization of the channel edge form geometry}, series = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2}, journal = {Proceedings : April 14 - 18, 2008, Leipzig, Germany / hosted by VDI, Society for Chemical and Process Engineering . Vol 2}, publisher = {Filtech Exhibitions}, address = {Meerbusch}, pages = {300 -- 304}, year = {2008}, language = {en} } @article{MalinowskiFournierHorbachetal.2022, author = {Malinowski, Daniel and Fournier, Yvan and Horbach, Andreas and Frick, Michael and Magliani, Mirko and Kalverkamp, Sebastian and Hildinger, Martin and Spillner, Jan and Behbahani, Mehdi and Hima, Flutura}, title = {Computational fluid dynamics analysis of endoluminal aortic perfusion}, series = {Perfusion}, volume = {0}, journal = {Perfusion}, number = {0}, publisher = {Sage}, address = {London}, issn = {1477-111X}, doi = {10.1177/02676591221099809}, pages = {1 -- 8}, year = {2022}, abstract = {Introduction: In peripheral percutaneous (VA) extracorporeal membrane oxygenation (ECMO) procedures the femoral arteries perfusion route has inherent disadvantages regarding poor upper body perfusion due to watershed. With the advent of new long flexible cannulas an advancement of the tip up to the ascending aorta has become feasible. To investigate the impact of such long endoluminal cannulas on upper body perfusion, a Computational Fluid Dynamics (CFD) study was performed considering different support levels and three cannula positions. Methods: An idealized literature-based- and a real patient proximal aortic geometry including an endoluminal cannula were constructed. The blood flow was considered continuous. Oxygen saturation was set to 80\% for the blood coming from the heart and to 100\% for the blood leaving the cannula. 50\% and 90\% venoarterial support levels from the total blood flow rate of 6 l/min were investigated for three different positions of the cannula in the aortic arch. Results: For both geometries, the placement of the cannula in the ascending aorta led to a superior oxygenation of all aortic blood vessels except for the left coronary artery. Cannula placements at the aortic arch and descending aorta could support supra-aortic arteries, but not the coronary arteries. All positions were able to support all branches with saturated blood at 90\% flow volume. Conclusions: In accordance with clinical observations CFD analysis reveals, that retrograde advancement of a long endoluminal cannula can considerably improve the oxygenation of the upper body and lead to oxygen saturation distributions similar to those of a central cannulation.}, language = {en} } @article{BhattaraiStaat2018, author = {Bhattarai, Aroj and Staat, Manfred}, title = {Computational comparison of different textile implants to correct apical prolapse in females}, series = {Current Directions in Biomedical Engineering}, volume = {4}, journal = {Current Directions in Biomedical Engineering}, number = {1}, publisher = {De Gruyter}, address = {Berlin}, doi = {10.1515/cdbme-2018-0159}, pages = {661 -- 664}, year = {2018}, abstract = {Prosthetic textile implants of different shapes, sizes and polymers are used to correct the apical prolapse after hysterectomy (removal of the uterus). The selection of the implant before or during minimally invasive surgery depends on the patient's anatomical defect, intended function after reconstruction and most importantly the surgeon's preference. Weakness or damage of the supporting tissues during childbirth, menopause or previous pelvic surgeries may put females in higher risk of prolapse. Numerical simulations of reconstructed pelvic floor with weakened tissues and organ supported by textile product models: DynaMesh®-PRS soft, DynaMesh®-PRP soft and DynaMesh®-CESA from FEG Textiletechnik mbH, Germany are compared.}, language = {en} }