@article{VahidpourAlghazaliAkcaetal.2022,
  author    = {Vahidpour, Farnoosh and Alghazali, Yousef and Akca, Sevilay and Hommes, Gregor and Sch{\"o}ning, Michael Josef},
  title     = {An Enzyme-Based Interdigitated Electrode-Type Biosensor for Detecting Low Concentrations of H₂O₂ Vapor/Aerosol},
  series = {Chemosensors},
  volume    = {10},
  journal   = {Chemosensors},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2227-9040},
  doi       = {10.3390/chemosensors10060202},
  pages     = {Arikel 202},
  year      = {2022},
  abstract  = {This work introduces a novel method for the detection of H₂O₂ vapor/aerosol of low concentrations, which is mainly applied in the sterilization of equipment in medical industry. Interdigitated electrode (IDE) structures have been fabricated by means of microfabrication techniques. A differential setup of IDEs was prepared, containing an active sensor element (active IDE) and a passive sensor element (passive IDE), where the former was immobilized with an enzymatic membrane of horseradish peroxidase that is selective towards H₂O₂. Changes in the IDEs' capacitance values (active sensor element versus passive sensor element) under H₂O₂ vapor/aerosol atmosphere proved the detection in the concentration range up to 630 ppm with a fast response time (<60 s). The influence of relative humidity was also tested with regard to the sensor signal, showing no cross-sensitivity. The repeatability assessment of the IDE biosensors confirmed their stable capacitive signal in eight subsequent cycles of exposure to H₂O₂ vapor/aerosol. Room-temperature detection of H₂O₂ vapor/aerosol with such miniaturized biosensors will allow a future three-dimensional, flexible mapping of aseptic chambers and help to evaluate sterilization assurance in medical industry.},
  language  = {en}
}
@article{LueckGerlingPredel1989,
  author    = {L{\"u}ck, Reinhard and Gerling, Ulrich and Predel, Bruno},
  title     = {An entropy paradox of the association model},
  series = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 80, H. 4},
  journal   = {Zeitschrift f{\"u}r Metallkunde : international journal of materials research and advanced techniques. Bd. 80, H. 4},
  issn      = {0044-3093 ; 0179-4841},
  pages     = {270 -- 275},
  year      = {1989},
  language  = {en}
}
@article{ColomboDriraFrotscheretal.2022,
  author    = {Colombo, Daniele and Drira, Slah and Frotscher, Ralf and Staat, Manfred},
  title     = {An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis},
  series = {International Journal for Numerical Methods in Engineering},
  volume    = {124},
  journal   = {International Journal for Numerical Methods in Engineering},
  number    = {2},
  publisher = {Wiley},
  address   = {Chichester},
  issn      = {1097-0207},
  doi       = {10.1002/nme.7126},
  pages     = {402 -- 433},
  year      = {2022},
  abstract  = {Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.},
  language  = {en}
}
@article{SchopenNarayanBeckmannetal.2024,
  author    = {Schopen, Oliver and Narayan, Sriram and Beckmann, Marvin and Najmi, Aezid-Ul-Hassan and Esch, Thomas and Shabani, Bahman},
  title     = {An EIS approach to quantify the effects of inlet air relative humidity on the performance of proton exchange membrane fuel cells: a pathway to developing a novel fault diagnostic method},
  series = {International Journal of Hydrogen Energy},
  volume    = {58},
  journal   = {International Journal of Hydrogen Energy},
  number    = {8},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0360-3199 (print)},
  issn      = {1879-3487 (online)},
  doi       = {10.1016/j.ijhydene.2024.01.218},
  pages     = {1302 -- 1315},
  year      = {2024},
  abstract  = {In this work, the effect of low air relative humidity on the operation of a polymer electrolyte membrane fuel cell is investigated. An innovative method through performing in situ electrochemical impedance spectroscopy is utilised to quantify the effect of inlet air relative humidity at the cathode side on internal ionic resistances and output voltage of the fuel cell. In addition, algorithms are developed to analyse the electrochemical characteristics of the fuel cell. For the specific fuel cell stack used in this study, the membrane resistance drops by over 39 \% and the cathode side charge transfer resistance decreases by 23 \% after increasing the humidity from 30 \% to 85 \%, while the results of static operation also show an increase of ∼2.2 \% in the voltage output after increasing the relative humidity from 30 \% to 85 \%. In dynamic operation, visible drying effects occur at < 50 \% relative humidity, whereby the increase of the air side stoichiometry increases the drying effects. Furthermore, other parameters, such as hydrogen humidification, internal stack structure, and operating parameters like stoichiometry, pressure, and temperature affect the overall water balance. Therefore, the optimal humidification range must be determined by considering all these parameters to maximise the fuel cell performance and durability. The results of this study are used to develop a health management system to ensure sufficient humidification by continuously monitoring the fuel cell polarisation data and electrochemical impedance spectroscopy indicators.},
  language  = {en}
}
@article{KraffBitzDammannetal.2010,
  author    = {Kraff, Oliver and Bitz, Andreas and Dammann, Philipp and Ladd, Susanne C. and Ladd, Mark E. and Quick, Harald H.},
  title     = {An eight-channel transmit/receive multipurpose coil for musculoskeletal MR imaging at 7 T},
  series = {Medical Physics},
  volume    = {37},
  journal   = {Medical Physics},
  number    = {12},
  publisher = {Wiley},
  address   = {Hoboken, NJ},
  issn      = {2473-4209},
  doi       = {10.1118/1.3517176},
  pages     = {6368 -- 6376},
  year      = {2010},
  abstract  = {Purpose: MRI plays a leading diagnostic role in assessing the musculoskeletal (MSK) system and is well established for most questions at clinically used field strengths (up to 3 T). However, there are still limitations in imaging early stages of cartilage degeneration, very fine tendons and ligaments, or in locating nerve lesions, for example. 7 T MRI of the knee has already received increasing attention in the current published literature, but there is a strong need to develop new radiofrequency (RF) coils to assess more regions of the MSK system. In this work, an eight-channel transmit/receive RF array was built as a multipurpose coil for imaging some of the thus far neglected regions. An extensive coil characterization protocol and first in vivo results of the human wrist, shoulder, elbow, knee, and ankle imaged at 7 T will be presented. Methods: Eight surface loop coils with a dimension ofurn:x-wiley:00942405:media:mp7176:mp7176-math-0001 were machined from FR4 circuit board material. To facilitate easy positioning, two coil clusters, each with four loop elements, were combined to one RF transmit/receive array. An overlapped and shifted arrangement of the coil elements was chosen to reduce the mutual inductance between neighboring coils. A phantom made of body-simulating liquid was used for tuning and matching on the bench. Afterward, the S-parameters were verified on a human wrist, elbow, and shoulder. For safety validation, a detailed compliance test was performed including full wave simulations of the RF field distribution and the corresponding specific absorption rate (SAR) for all joints. In vivo images of four volunteers were assessed with gradient echo and spin echo sequences modified to obtain optimal image contrast, full anatomic coverage, and the highest spatial resolution within a reasonable acquisition time. The performance of the RF coil was additionally evaluated by in vivo B1 mapping. Results: A comparison of B1 per unit power, flip angle distribution, and anatomic images showed a fairly homogeneous excitation for the smaller joints (elbow, wrist, and ankle), while for the larger joints, the shoulder and especially the knee, B1 inhomogeneities and limited penetration depth were more pronounced. However, the greater part of the shoulder joint could be imaged.In vivo images rendered very fine anatomic details such as fascicles of the median nerve and the branching of the nerve bundles. High-resolution images of cartilage, labrum, and tendons could be acquired. Additionally, turbo spin echo (TSE) and inversion recovery sequences performed very well. Conclusions: This study demonstrates that the concept of two four-channel transmit/receive RF arrays can be used as a multipurpose coil for high-resolutionin vivo MR imaging of the musculoskeletal system at 7 T. Not only gradient echo but also typical clinical and SAR-intensive sequences such as STIR and TSE performed well. Imaging of small structures and peripheral nerves could in particular benefit from this technique.},
  language  = {en}
}
@article{KraffBitzKruszonaetal.2009,
  author    = {Kraff, Oliver and Bitz, Andreas and Kruszona, Stefan and Orzada, Stephan and Schaefer, Lena C. and Theysohn, Jens M. and Maderwald, Stefan and Ladd, Mark E. and Quick, Harald H.},
  title     = {An eight-channel phased array RF coil for spine MR imaging at 7 T},
  series = {Investigative Radiology},
  volume    = {44},
  journal   = {Investigative Radiology},
  number    = {11},
  publisher = {Lippincott Williams \& Wilkins},
  issn      = {1536-0210},
  doi       = {10.1097/RLI.0b013e3181b24ab7},
  pages     = {734 -- 740},
  year      = {2009},
  language  = {en}
}
@article{TranStaat2013,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {89 -- 102},
  year      = {2013},
  language  = {en}
}
@article{Hirschberg2002,
  author    = {Hirschberg, Rainer},
  title     = {An die {\"U}bergabe gekoppelt. Berechnung der W{\"a}rmeabgabe von Heizrohrnetzen und des elektrischen Energieaufwands fuer die Umw{\"a}lzung},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 53 (2002), H. 9},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik ; Zeitschrift des Vereins Deutscher Ingenieure ; Organ der VDI-Gesellschaft Technische Geb{\"a}udeausr{\"u}stung (VDI-TGA) / Hrsg. Verein Deutscher Ingenieure. 53 (2002), H. 9},
  isbn      = {1436-5103},
  pages     = {32 -- 35},
  year      = {2002},
  language  = {de}
}
@article{SpiessWilfriedAlvarezetal.2011,
  author    = {Spiess, Elmar and Wilfried, Reichardt and Alvarez, Gerardo and Gottrup, Marcus and {\"O}hlschl{\"a}ger, Peter},
  title     = {An Artificial PAP Gene Breaks Self-tolerance and Promotes Tumor Regression in the TRAMP Model for Prostate Carcinoma},
  series = {Molecular Therapy},
  volume    = {20},
  journal   = {Molecular Therapy},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1525-0016},
  pages     = {555 -- 564},
  year      = {2011},
  language  = {en}
}
@article{PoghossianWeldenBuniatyanetal.2021,
  author    = {Poghossian, Arshak and Welden, Rene and Buniatyan, Vahe V. and Sch{\"o}ning, Michael Josef},
  title     = {An Array of On-Chip Integrated, Individually Addressable Capacitive Field-Effect Sensors with Control Gate: Design and Modelling},
  series = {Sensors},
  volume    = {21},
  journal   = {Sensors},
  number    = {18},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s21186161},
  pages     = {17},
  year      = {2021},
  abstract  = {The on-chip integration of multiple biochemical sensors based on field-effect electrolyte-insulator-semiconductor capacitors (EISCAP) is challenging due to technological difficulties in realization of electrically isolated EISCAPs on the same Si chip. In this work, we present a new simple design for an array of on-chip integrated, individually electrically addressable EISCAPs with an additional control gate (CG-EISCAP). The existence of the CG enables an addressable activation or deactivation of on-chip integrated individual CG-EISCAPs by simple electrical switching the CG of each sensor in various setups, and makes the new design capable for multianalyte detection without cross-talk effects between the sensors in the array. The new designed CG-EISCAP chip was modelled in so-called floating/short-circuited and floating/capacitively-coupled setups, and the corresponding electrical equivalent circuits were developed. In addition, the capacitance-voltage curves of the CG-EISCAP chip in different setups were simulated and compared with that of a single EISCAP sensor. Moreover, the sensitivity of the CG-EISCAP chip to surface potential changes induced by biochemical reactions was simulated and an impact of different parameters, such as gate voltage, insulator thickness and doping concentration in Si, on the sensitivity has been discussed.},
  language  = {en}
}
@article{AbouzarPoghossianPedrazaetal.2011,
  author    = {Abouzar, Maryam H. and Poghossian, Arshak and Pedraza, A. M. and Gandhi, D. and Ingebrandt, S. and Moritz, W. and Sch{\"o}ning, Michael Josef},
  title     = {An array of field-effect nanoplate SOI capacitors for (bio-)chemical sensing},
  series = {Biosensors and Bioelectronics. 26 (2011), H. 6},
  journal   = {Biosensors and Bioelectronics. 26 (2011), H. 6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0956-5663},
  pages     = {3023 -- 3028},
  year      = {2011},
  language  = {en}
}
@article{BiselliBornThoemmesetal.1996,
  author    = {Biselli, Manfred and Born, C. and Th{\"o}mmes, J. and Wandrey, C.},
  title     = {An approach to integrated antibody production: Coupling of fluidized bed cultivation and fluidized bed adsorption / Born, C. ; Th{\"o}mmes, J. ; Biselli, M. ; Wandrey, C. ; Kula, M.-R.},
  series = {Bioprocess Engineering. 15 (1996), H. 1},
  journal   = {Bioprocess Engineering. 15 (1996), H. 1},
  isbn      = {1615-7591},
  pages     = {21 -- 29},
  year      = {1996},
  language  = {en}
}
@article{BialonskiAllefeldWellmeretal.2008,
  author    = {Bialonski, Stephan and Allefeld, C. and Wellmer, J. and Elger, C. and Lehnertz, K.},
  title     = {An approach to identify synchronization clusters within the epileptic network},
  series = {Klinische Neurophysiologie},
  volume    = {39},
  journal   = {Klinische Neurophysiologie},
  number    = {1},
  doi       = {10.1055/s-2008-1072881},
  pages     = {A79},
  year      = {2008},
  language  = {en}
}
@article{SchusserPoghossianBaeckeretal.2015,
  author    = {Schusser, Sebastian and Poghossian, Arshak and B{\"a}cker, Matthias and Krischer, M. and Leinhos, Marcel and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {An application of field-effect sensors for in-situ monitoring of degradation of biopolymers},
  series = {Sensors and actuators B: Chemical},
  volume    = {207, Part B},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.10.058},
  pages     = {954 -- 959},
  year      = {2015},
  abstract  = {The characterization of the degradation kinetics of biodegradable polymers is mandatory with regard to their proper application. In the present work, polymer-modified electrolyte-insulator-semiconductor (PMEIS) field-effect sensors have been applied for in-situ monitoring of the pH-dependent degradation kinetics of the commercially available biopolymer poly(d,l-lactic acid) (PDLLA) in buffer solutions from pH 3 to pH 13. PDLLA films of 500 nm thickness were deposited on the surface of an Al-p-Si-SiO2-Ta2O5 structure from a polymer solution by means of spin-coating method. The PMEIS sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. A faster degradation has been observed for PDLLA films exposed to alkaline solutions (pH 9, pH 11 and pH 13).},
  language  = {en}
}
@article{SchubaReichl1998,
  author    = {Schuba, Marko and Reichl, Peter},
  title     = {An Analysis of Retransmission Strategies for Reliable Multicast Protocols / Schuba, M. ; Reichl, P.},
  series = {Performance of information and communication systems : IFIP TC 6,WG 6.3 Seventh International Conference on Performance of Information and Communication Systems (PICS '98), 25 - 28 May, Lund, Sweden / ed. by Ulf K{\"o}rner ...},
  journal   = {Performance of information and communication systems : IFIP TC 6,WG 6.3 Seventh International Conference on Performance of Information and Communication Systems (PICS '98), 25 - 28 May, Lund, Sweden / ed. by Ulf K{\"o}rner ...},
  publisher = {Chapman Hall},
  address   = {London},
  isbn      = {0-412-83730-7},
  pages     = {1 -- 12},
  year      = {1998},
  language  = {en}
}
@article{StaatVu2004,
  author    = {Staat, Manfred and Vu, Duc-Khoi},
  title     = {An Algorithm for Shakedown Analysis for Materials with Temperature Dependent Yield Stress},
  series = {Proceedings in Applied Mathematics and Mechanics (PAMM). 4 (2004), H. 1},
  journal   = {Proceedings in Applied Mathematics and Mechanics (PAMM). 4 (2004), H. 1},
  isbn      = {1617-7061},
  pages     = {231 -- 233},
  year      = {2004},
  language  = {en}
}
@article{FassbenderVoglerWedel1993,
  author    = {Faßbender, Heinz and Vogler, Heiko and Wedel, Andrea},
  title     = {An abstract machine for the E-Unification with macro tree transducer},
  series = {7th International Workshop on Unification : 13. 06. - 14. 06. 93 / Franz Baader ... (eds.). [Boston University, Boston, USA]},
  journal   = {7th International Workshop on Unification : 13. 06. - 14. 06. 93 / Franz Baader ... (eds.). [Boston University, Boston, USA]},
  year      = {1993},
  language  = {en}
}
@article{RietschPfaffenrotBitzetal.2017,
  author    = {Rietsch, Stefan H. G. and Pfaffenrot, Viktor and Bitz, Andreas and Orzada, Stephan and Brunheim, Sascha and Lazik-Palm, Andrea and Theysohn, Jens M. and Ladd, Mark E. and Quick, Harald H. and Kraff, Oliver},
  title     = {An 8-channel transceiver 7-channel receive RF coil setup for high SNR ultrahigh-field MRI of the shoulder at 7T},
  series = {Medical Physics},
  journal   = {Medical Physics},
  number    = {Article in press},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0094-2405},
  doi       = {10.1002/mp.12612},
  year      = {2017},
  language  = {en}
}
@article{SchaelAtanasyanBerdugoetal.2019,
  author    = {Schael, S. and Atanasyan, A. and Berdugo, J. and Bretz, T. and Czupalla, Markus and Dachwald, Bernd and Doetinchem, P. von and Duranti, M. and Gast, H. and Karpinski, W. and Kirn, T. and L{\"u}belsmeyer, K. and Ma{\~n}a, C. and Marrocchesi, P.S. and Mertsch, P. and Moskalenko, I.V. and Schervan, T. and Schluse, M. and Schr{\"o}der, K.-U. and Schultz von Dratzig, A. and Senatore, C. and Spies, L. and Wakely, S.P. and Wlochal, M. and Uglietti, D. and Zimmermann, J.},
  title     = {AMS-100: The next generation magnetic spectrometer in space - An international science platform for physics and astrophysics at Lagrange point 2},
  series = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  volume    = {944},
  journal   = {Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  number    = {162561},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-9002},
  doi       = {10.1016/j.nima.2019.162561},
  year      = {2019},
  language  = {en}
}
@article{SchoeningJacobsMucketal.2005,
  author    = {Sch{\"o}ning, Michael Josef and Jacobs, M. and Muck, A. and Knobbe, D.-T. and Wang, J. and Chatrathi, M. and Spillmann, S.},
  title     = {Amperometric PDMS/glass capillary electrophoresis-based biosensor microchip for catechol and dopamin detection},
  series = {Sensors and Actuators B. 108 (2005), H. 1-2},
  journal   = {Sensors and Actuators B. 108 (2005), H. 1-2},
  isbn      = {0925-4005},
  pages     = {688 -- 694},
  year      = {2005},
  language  = {en}
}