@article{HeuermannEmmrichBongartz2022,
  author    = {Heuermann, Holger and Emmrich, Thomas and Bongartz, Simon},
  title     = {Microwave spark plug to support ignitions with high compression ratios},
  series = {IEEE Transactions on Plasma Science},
  journal   = {IEEE Transactions on Plasma Science},
  number    = {Early Access},
  publisher = {IEEE},
  issn      = {1939-9375},
  doi       = {10.1109/TPS.2022.3183690},
  pages     = {1 -- 6},
  year      = {2022},
  abstract  = {Upcoming gasoline engines should run with a larger number of fuels beginning from petrol over methanol up to gas by a wide range of compression ratios and a homogeneous charge. In this article, the microwave (MW) spark plug, based on a high-speed frequency hopping system, is introduced as a solution, which can support a nitrogen compression ratio up to 1:39 in a chamber and more. First, an overview of the high-speed frequency hopping MW ignition and operation system as well as the large number of applications are presented. Both gives an understanding of this new base technology for MW plasma generation. Focus of the theoretical part is the explanation of the internal construction of the spark plug, on the achievable of the high voltage generation as well as the high efficiency to hold the plasma. In detail, the development process starting with circuit simulations and ending with the numerical multiphysics field simulations is described. The concept is evaluated with a reference prototype covering the frequency range between 2.40 and 2.48 GHz and working over a large power range from 20 to 200 W. A larger number of different measurements starting by vector hot-S11 measurements and ending by combined working scenarios out of hot temperature, high pressure and charge motion are winding up the article. The limits for the successful pressure tests were given by the pressure chamber. Pressures ranged from 1 to 39 bar and charge motion up to 25 m/s as well as temperatures from 30◦ to 125◦.},
  language  = {en}
}
@article{FiedlerOrzadaFloeseretal.2022,
  author    = {Fiedler, Thomas M. and Orzada, Stephan and Fl{\"o}ser, Martina and Rietsch, Stefan H. G. and Schmidt, Simon and Stelter, Jonathan K. and Wittrich, Marco and Quick, Harald H. and Bitz, Andreas and Ladd, Mark E.},
  title     = {Performance and safety assessment of an integrated transmit array for body imaging at 7 T under consideration of specificabsorption rate, tissue temperature, and thermal dose},
  series = {NMR in Biomedicine},
  volume    = {35},
  journal   = {NMR in Biomedicine},
  number    = {5},
  publisher = {Wiley},
  issn      = {0952-3480 (Print)},
  doi       = {10.1002/nbm.4656},
  pages     = {1 -- 17},
  year      = {2022},
  abstract  = {In this study, the performance of an integrated body-imaging array for 7 T with 32 radiofrequency (RF) channels under consideration of local specific absorption rate (SAR), tissue temperature, and thermal dose limits was evaluated and the imaging performance was compared with a clinical 3 T body coil. Thirty-two transmit elements were placed in three rings between the bore liner and RF shield of the gradient coil. Slice-selective RF pulse optimizations for B1 shimming and spokes were performed for differently oriented slices in the body under consideration of realistic constraints for power and local SAR. To improve the B1+ homogeneity, safety assessments based on temperature and thermal dose were performed to possibly allow for higher input power for the pulse optimization than permissible with SAR limits. The results showed that using two spokes, the 7 T array outperformed the 3 T birdcage in all the considered regions of interest. However, a significantly higher SAR or lower duty cycle at 7 T is necessary in some cases to achieve similar B1+ homogeneity as at 3 T. The homogeneity in up to 50 cm-long coronal slices can particularly benefit from the high RF shim performance provided by the 32 RF channels. The thermal dose approach increases the allowable input power and the corresponding local SAR, in one example up to 100 W/kg, without limiting the exposure time necessary for an MR examination. In conclusion, the integrated antenna array at 7 T enables a clinical workflow for body imaging and comparable imaging performance to a conventional 3 T clinical body coil.},
  language  = {en}
}
@article{SchulteTiggesFoersterNikolovskietal.2022,
  author    = {Schulte-Tigges, Joschua and F{\"o}rster, Marco and Nikolovski, Gjorgji and Reke, Michael and Ferrein, Alexander and Kaszner, Daniel and Matheis, Dominik and Walter, Thomas},
  title     = {Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {19},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s22197146},
  pages     = {20 Seiten},
  year      = {2022},
  abstract  = {Abstract In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.},
  language  = {en}
}
@article{HoffmannRohrbachUhletal.2022,
  author    = {Hoffmann, Andreas and Rohrbach, Felix and Uhl, Matthias and Ceblin, Maximilian and Bauer, Thomas and Mallah, Marcel and Jacob, Timo and Heuermann, Holger and Kuehne, Alexander J. C.},
  title     = {Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing},
  series = {Journal of Applied Polymer Science},
  volume    = {139},
  journal   = {Journal of Applied Polymer Science},
  number    = {37},
  publisher = {Wiley},
  issn      = {0021-8995 (Print)},
  doi       = {10.1002/app.52887},
  pages     = {1 -- 9},
  year      = {2022},
  abstract  = {Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.},
  language  = {en}
}
@misc{HueningBackes2022,
  author    = {H{\"u}ning, Felix and Backes, Andreas},
  title     = {Wiegand-Modul},
  year      = {2022},
  abstract  = {Ein Wiegand-Modul (110;210;310) umfassend- eine Sensorspule (112;212;312),- einen ersten Wiegand-Draht (116a;216a;316a), der zumindest teilweise innerhalb der Sensorspule (112;212;312) angeordnet ist, und- einen zweiten Wiegand-Draht (116b;216b;316b), der zumindest teilweise innerhalb der Sensorspule (112;212;312) angeordnet ist und sich im Wesentlichen parallel zu dem ersten Wiegand-Draht (116a;216a;316a) erstreckt, ist bekannt.Um eine effiziente Ausnutzung der durch die Ummagnetisierung der Wiegand-Dr{\"a}hte (116a,116b;216a,216b;316a,316b) in die Sensorspule (112;212;312) induzierten elektrischen Energie zu erm{\"o}glichen, sind der erste Wiegand-Draht (116a;216a;316a) und der zweite Wiegand-Draht (116b;216b;316b) bezogen auf eine axiale Richtung der Sensorspule (112;212;312) versetzt zueinander angeordnet.},
  language  = {de}
}
@misc{WiegnerVolkerMainzetal.2022,
  author    = {Wiegner, J. and Volker, H. and Mainz, F. and Backes, A. and L{\"o}ken, M. and H{\"u}ning, Felix},
  title     = {Wiegand-Effect-Powered Wireless IT Sensor Node},
  year      = {2022},
  abstract  = {With the growing interest in small distributed sensors for the "Internet of Things", more attention is being paid to energy harvesting techologies. Reducing or eliminating the need for external power sources or batteries make devices more self-sufficient, more reliable, and reduces maintenance requirements. The Wiegand effect is a proven technology for harvesting small amounts of electrical power from mechanical motion.},
  language  = {en}
}
@article{CollPeralesSchulteTiggesRondinoneetal.2022,
  author    = {Coll-Perales, Baldomero and Schulte-Tigges, Joschua and Rondinone, Michele and Gozalvez, Javier and Reke, Michael and Matheis, Dominik and Walter, Thomas},
  title     = {Prototyping and evaluation of infrastructure-assisted transition of control for cooperative automated vehicles},
  series = {IEEE Transactions on Intelligent Transportation Systems},
  volume    = {23},
  journal   = {IEEE Transactions on Intelligent Transportation Systems},
  number    = {7},
  publisher = {IEEE},
  issn      = {1524-9050 (Print)},
  doi       = {10.1109/TITS.2021.3061085},
  pages     = {6720 -- 6736},
  year      = {2022},
  abstract  = {Automated driving is now possible in diverse road and traffic conditions. However, there are still situations that automated vehicles cannot handle safely and efficiently. In this case, a Transition of Control (ToC) is necessary so that the driver takes control of the driving. Executing a ToC requires the driver to get full situation awareness of the driving environment. If the driver fails to get back the control in a limited time, a Minimum Risk Maneuver (MRM) is executed to bring the vehicle into a safe state (e.g., decelerating to full stop). The execution of ToCs requires some time and can cause traffic disruption and safety risks that increase if several vehicles execute ToCs/MRMs at similar times and in the same area. This study proposes to use novel C-ITS traffic management measures where the infrastructure exploits V2X communications to assist Connected and Automated Vehicles (CAVs) in the execution of ToCs. The infrastructure can suggest a spatial distribution of ToCs, and inform vehicles of the locations where they could execute a safe stop in case of MRM. This paper reports the first field operational tests that validate the feasibility and quantify the benefits of the proposed infrastructure-assisted ToC and MRM management. The paper also presents the CAV and roadside infrastructure prototypes implemented and used in the trials. The conducted field trials demonstrate that infrastructure-assisted traffic management solutions can reduce safety risks and traffic disruptions.},
  language  = {en}
}
@inproceedings{LosseGehrkeUllrichetal.2022,
  author    = {Losse, Ann-Kathrin and Gehrke, Melanie and Ullrich, Andr{\´e} and Czarnecki, Christian and Sultanow, Eldar and Breithaupt, Carsten and Koch, Christian},
  title     = {Entwicklung einer Open-Data-Referenzarchitektur f{\"u}r die Luftfahrtindustrie},
  series = {INFORMATIK 2022 - Informatik in den Naturwissenschaften, Proceedings},
  booktitle = {INFORMATIK 2022 - Informatik in den Naturwissenschaften, Proceedings},
  publisher = {GI - Gesellschaft f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-720-3},
  issn      = {1617-5468},
  doi       = {10.18420/inf2022_103},
  pages     = {1203 -- 1209},
  year      = {2022},
  abstract  = {Open Data impliziert die freie Zug{\"a}nglichkeit, Verf{\"u}gbarkeit und Wiederverwendbarkeit von Datens{\"a}tzen. Obwohl hochwertige Datens{\"a}tze {\"o}ffentlich verf{\"u}gbar sind, ist der Zugang zu diesen und die Transparenz {\"u}ber die Formate nicht immer gegeben. Dies mindert die optimale Nutzung des Potenzials zur Wertsch{\"o}pfung, trotz der vorherrschenden Einigkeit {\"u}ber ihre Chancen. Denn Open Data erm{\"o}glicht das Vorantreiben von Compliance-Themen wie Transparenz und Rechenschaftspflicht bis hin zur F{\"o}rderung von Innovationen. Die Nutzung von Open Data erfordert Mut und eine gemeinsame Anstrengung verschiedener Akteure und Branchen. Im Rahmen des vorliegenden Beitrags werden auf Grundlage des Design Science-Ansatzes eine Open Data Capability Map sowie darauf aufbauend eine Datenarchitektur f{\"u}r Open Data in der Luftfahrtindustrie an einem Beispiel entwickelt.},
  language  = {de}
}
@inproceedings{ChircuCzarneckiFriedmannetal.2023,
  author    = {Chircu, Alina and Czarnecki, Christian and Friedmann, Daniel and Pomaskow, Johanna and Sultanow, Eldar},
  title     = {Towards a Digital Twin of Society},
  series = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023},
  booktitle = {Proceedings of the 56th Hawaii International Conference on System Sciences 2023},
  publisher = {University of Hawai'i},
  address   = {Honolulu},
  isbn      = {978-0-9981331-6-4},
  pages     = {6748 -- 6757},
  year      = {2023},
  abstract  = {This paper describes the potential for developing a digital twin of society- a dynamic model that can be used to observe, analyze, and predict the evolution of various societal aspects. Such a digital twin can help governmental agencies and policy makers in interpreting trends, understanding challenges, and making decisions regarding investments or policies necessary to support societal development and ensure future prosperity. The paper reviews related work regarding the digital twin paradigm and its applications. The paper presents a motivating case study- an analysis of opportunities and challenges faced by the German federal employment agency, Bundesagentur f¨ur Arbeit (BA), proposes solutions using digital twins, and describes initial proofs of concept for such solutions.},
  language  = {en}
}
@incollection{StollenwerkFranzkeMaureretal.2023,
  author    = {Stollenwerk, Dominik and Franzke, Till and Maurer, Florian and Reinkensmeier, Sebastian and Kim, Franken and Tambornino, Philipp and Haas, Florian and Rieke, Christian and Hermanuz, Andreas and Borchert, J{\"o}rg and Ritz, Thomas and Sander, Volker},
  title     = {Smarte Lades{\"a}ulen : Netz- und Marktdienliches {\"o}ffentliches Laden},
  series = {Towards the New Normal in Mobility : Technische und betriebswirtschaftliche Aspekte},
  booktitle = {Towards the New Normal in Mobility : Technische und betriebswirtschaftliche Aspekte},
  editor    = {Proff, Heike},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  isbn      = {978-3-658-39437-0 (Print)},
  doi       = {10.1007/978-3-658-39438-7_18},
  pages     = {287 -- 304},
  year      = {2023},
  abstract  = {Stand 01.01.2022 sind in Deutschland 618.460 elektrisch angetriebene KFZ zugelassen. Insgesamt sind derzeit 48.540.878 KFZ zugelassen, was einer Elektromobilit{\"a}tsquote von ca. 1,2 \% entspricht. Derzeit werden Elektromobile {\"u}ber Ladestationen oder Steckdosen mit dem Stromnetz verbunden und {\"u}blicherweise mit der vollen Ladekapazit{\"a}t des Anschlusses aufgeladen, bis das Batteriemanagementsystem des Fahrzeugs abh{\"a}ngig vom Ladezustand der Batterie die Ladeleistung reduziert.},
  language  = {de}
}
@inproceedings{AltherrConzenElsenetal.2023,
  author    = {Altherr, Lena and Conzen, Max and Elsen, Ingo and Frauenrath, Tobias and Lyrmann, Andreas},
  title     = {Sensor retrofitting of existing buildings in an interdisciplinary teaching project at university level},
  series = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  booktitle = {Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel},
  editor    = {Reiff-Stephan, J{\"o}rg and J{\"a}kel, Jens and Schwarz, Andr{\´e}},
  publisher = {le-tex publishing services GmbH},
  address   = {Leipzig},
  isbn      = {978-3-910103-01-6},
  doi       = {10.33968/2023.04},
  pages     = {31 -- 40},
  year      = {2023},
  abstract  = {Existing residential buildings have an average lifetime of 100 years. Many of these buildings will exist for at least another 50 years. To increase the efficiency of these buildings while keeping costs at reasonable rates, they can be retrofitted with sensors that deliver information to central control units for heating, ventilation and electricity. This retrofitting process should happen with minimal intervention into existing infrastructure and requires new approaches for sensor design and data transmission. At FH Aachen University of Applied Sciences, students of different disciplines work together to learn how to design, build, deploy and operate such sensors. The presented teaching project already created a low power design for a combined CO2, temperature and humidity measurement device that can be easily integrated into most home automation systems},
  language  = {en}
}
@inproceedings{ViehmannLimpertHofmannetal.2023,
  author    = {Viehmann, Tarik and Limpert, Nicolas and Hofmann, Till and Henning, Mike and Ferrein, Alexander and Lakemeyer, Gerhard},
  title     = {Winning the RoboCup logistics league with visual servoing and centralized goal reasoning},
  series = {RoboCup 2022: Robot World Cup XXV},
  booktitle = {RoboCup 2022: Robot World Cup XXV},
  editor    = {Eguchi, Amy and Lau, Nuno and Paetzel-Pr{\"u}smann, Maike and Wanichanon, Thanapat},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-28468-7 (Print)},
  doi       = {https://doi.org/10.1007/978-3-031-28469-4_25},
  pages     = {300 -- 312},
  year      = {2023},
  abstract  = {The RoboCup Logistics League (RCLL) is a robotics competition in a production logistics scenario in the context of a Smart Factory. In the competition, a team of three robots needs to assemble products to fulfill various orders that are requested online during the game. This year, the Carologistics team was able to win the competition with a new approach to multi-agent coordination as well as significant changes to the robot's perception unit and a pragmatic network setup using the cellular network instead of WiFi. In this paper, we describe the major components of our approach with a focus on the changes compared to the last physical competition in 2019.},
  language  = {en}
}
@inproceedings{NethSchubaBrodkorbetal.2023,
  author    = {Neth, Jannik and Schuba, Marko and Brodkorb, Karsten and Neugebauer, Georg and H{\"o}ner, Tim and Hack, Sacha},
  title     = {Digital forensics triage app for android},
  series = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  booktitle = {ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security},
  publisher = {ACM},
  isbn      = {9798400707728},
  doi       = {10.1145/3600160.3605017},
  pages     = {6 Seiten},
  year      = {2023},
  abstract  = {Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator - without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.},
  language  = {en}
}
@inproceedings{ArndtConzenElsenetal.2023,
  author    = {Arndt, Tobias and Conzen, Max and Elsen, Ingo and Ferrein, Alexander and Galla, Oskar and K{\"o}se, Hakan and Schiffer, Stefan and Tschesche, Matteo},
  title     = {Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers},
  series = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  booktitle = {PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments},
  publisher = {ACM},
  isbn      = {9798400700699},
  doi       = {10.1145/3594806.3596558},
  pages     = {535 -- 542},
  year      = {2023},
  abstract  = {This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100\% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.},
  language  = {en}
}
@inproceedings{ZaehlTheisWolfetal.2023,
  author    = {Z{\"a}hl, Philipp M. and Theis, Sabine and Wolf, Martin and K{\"o}hler, Klemens},
  title     = {Teamwork in software development and what personality has to do with it - an overview},
  series = {Virtual, Augmented and Mixed Reality},
  booktitle = {Virtual, Augmented and Mixed Reality},
  editor    = {Chen, Jessie Y. C. and Fragomeni, Gino},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-35633-9 (Print)},
  doi       = {10.1007/978-3-031-35634-6_10},
  pages     = {130 -- 153},
  year      = {2023},
  abstract  = {Due to the increasing complexity of software projects, software development is becoming more and more dependent on teams. The quality of this teamwork can vary depending on the team composition, as teams are always a combination of different skills and personality types. This paper aims to answer the question of how to describe a software development team and what influence the personality of the team members has on the team dynamics. For this purpose, a systematic literature review (n=48) and a literature search with the AI research assistant Elicit (n=20) were conducted. Result: A person's personality significantly shapes his or her thinking and actions, which in turn influences his or her behavior in software development teams. It has been shown that team performance and satisfaction can be strongly influenced by personality. The quality of communication and the likelihood of conflict can also be attributed to personality.},
  language  = {en}
}
@incollection{EggertZaehlWolfetal.2023,
  author    = {Eggert, Mathias and Z{\"a}hl, Philipp M. and Wolf, Martin R. and Haase, Martin},
  title     = {Applying leaderboards for quality improvement in software development projects},
  series = {Software Engineering for Games in Serious Contexts},
  booktitle = {Software Engineering for Games in Serious Contexts},
  editor    = {Cooper, Kendra M.L. and Bucchiarone, Antonio},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-031-33337-8 (Print)},
  doi       = {10.1007/978-3-031-33338-5_11},
  pages     = {243 -- 263},
  year      = {2023},
  abstract  = {Software development projects often fail because of insufficient code quality. It is now well documented that the task of testing software, for example, is perceived as uninteresting and rather boring, leading to poor software quality and major challenges to software development companies. One promising approach to increase the motivation for considering software quality is the use of gamification. Initial research works already investigated the effects of gamification on software developers and come to promising. Nevertheless, a lack of results from field experiments exists, which motivates the chapter at hand. By conducting a gamification experiment with five student software projects and by interviewing the project members, the chapter provides insights into the changing programming behavior of information systems students when confronted with a leaderboard. The results reveal a motivational effect as well as a reduction of code smells.},
  language  = {en}
}
@article{KowalewskiBragardHueningetal.2023,
  author    = {Kowalewski, Paul and Bragard, Michael and H{\"u}ning, Felix and De Doncker, Rik W.},
  title     = {An inexpensive Wiegand-sensor-based rotary encoder without rotating magnets for use in electrical drives},
  series = {IEEE Transactions on Instrumentation and Measurement},
  journal   = {IEEE Transactions on Instrumentation and Measurement},
  publisher = {IEEE},
  issn      = {0018-9456 (Print)},
  doi       = {10.1109/TIM.2023.3326166},
  pages     = {10 Seiten},
  year      = {2023},
  abstract  = {This paper introduces an inexpensive Wiegand-sensor-based rotary encoder that avoids rotating magnets and is suitable for electrical-drive applications. So far, Wiegand-sensor-based encoders usually include a magnetic pole wheel with rotating permanent magnets. These encoders combine the disadvantages of an increased magnet demand and a limited maximal speed due to the centripetal force acting on the rotating magnets. The proposed approach reduces the total demand of permanent magnets drastically. Moreover, the rotating part is manufacturable from a single piece of steel, which makes it very robust and cheap. This work presents the theoretical operating principle of the proposed approach and validates its benefits on a hardware prototype. The presented proof-of-concept prototype achieves a mechanical resolution of 4.5 ° by using only 4 permanent magnets, 2Wiegand sensors and a rotating steel gear wheel with 20 teeth.},
  language  = {en}
}
@inproceedings{AlhaskirTschescheLinkeetal.2023,
  author    = {Alhaskir, Mohamed and Tschesche, Matteo and Linke, Florian and Schriewer, Elisabeth and Weber, Yvonne and Wolking, Stefan and R{\"o}hrig, Rainer and Koch, Henner and Kutafina, Ekaterina},
  title     = {ECG matching: an approach to synchronize ECG datasets for data quality comparisons},
  series = {Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023},
  volume    = {307},
  booktitle = {Proceedings of the 68th Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023},
  editor    = {R{\"o}hrig, Rainer and Grabe, Niels and Haag, Martin and H{\"u}bner, Ursula and Sax, Ulrich and Schmidt, Carsten Oliver and Sedlmayr, Martin and Zapf, Antonia},
  publisher = {IOS Press},
  isbn      = {978-1-64368-428-4 (Print)},
  doi       = {10.3233/SHTI230718},
  pages     = {225 -- 232},
  year      = {2023},
  abstract  = {Clinical assessment of newly developed sensors is important for ensuring their validity. Comparing recordings of emerging electrocardiography (ECG) systems to a reference ECG system requires accurate synchronization of data from both devices. Current methods can be inefficient and prone to errors. To address this issue, three algorithms are presented to synchronize two ECG time series from different recording systems: Binned R-peak Correlation, R-R Interval Correlation, and Average R-peak Distance. These algorithms reduce ECG data to their cyclic features, mitigating inefficiencies and minimizing discrepancies between different recording systems. We evaluate the performance of these algorithms using high-quality data and then assess their robustness after manipulating the R-peaks. Our results show that R-R Interval Correlation was the most efficient, whereas the Average R-peak Distance and Binned R-peak Correlation were more robust against noisy data.},
  language  = {en}
}
@book{Heuermann2023,
  author    = {Heuermann, Holger},
  title     = {Hochfrequenztechnik. Komponenten und Mess-, Funk-, RFID- sowie Lokalisierungssysteme},
  edition   = {4},
  publisher = {Springer Fachmedien},
  address   = {Wiesbaden},
  isbn      = {978-3-658-37825-7 (Print)},
  pages     = {XV, 453 Seiten},
  year      = {2023},
  abstract  = {Dieses Lehr- und Fachbuch vermittelt anschaulich die Grundlagen der HF-Technik, gibt konkrete Beschreibungen f{\"u}r den Entwurf von linearen Komponenten aus Bauteilen wie auch Leitungen f{\"u}r High-Speed- und HF-Schaltungen. Dem Leser wird vermittelt, wie Bauteile modelliert und Schaltungen synthetisiert und optimiert werden. Mit Hilfe frei verf{\"u}gbarer Simulationssoftware k{\"o}nnen GHz-Schaltungen selbst entwickelt werden. Viele {\"U}bungsbeispiele erm{\"o}glichen die Eigenkontrolle des Wissensstandes. Weiterhin werden komplexe nichtlineare Komponenten wie Hochfrequenzmischer, Oszillatoren und Synthesegeneratoren in ihrer Funktionalit{\"a}t dargestellt. Die neuen Mixed-Mode-Streuparameter sowie deren Leitungs- und Schaltungstechnik f{\"u}r Anwendungen der schnellen Digital- und der modernen HF-Technik sind ausf{\"u}hrlich beschrieben. Es wird auf Systeme f{\"u}r folgende Bereiche eingegangen: Streuparametermesstechnik, verschiedene Funktechniken, UHF-RFID und Lokalisierung- und Ortung. Dem Leser wird somit erm{\"o}glicht, komplexe GHz-Schaltungen insbesondere mit Halbleiter-, SMD- und LTCC-Schaltungen zu entwickeln.},
  language  = {de}
}
@book{Heuermann2023,
  author    = {Heuermann, Holger},
  title     = {Mikrowellentechnik : Feldsimulation, nichtlineare Schaltungstechnik, Komponenten und Subsysteme, Plasmatechnik, Antennen und Ausbreitung},
  edition   = {2. Auflage},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41286-9},
  doi       = {10.1007/978-3-658-41287-6},
  pages     = {XVI, 394 Seiten},
  year      = {2023},
  abstract  = {Das Lehrbuch behandelt alle Aspekte, die den aktuellen Stand der GHz-Technik betreffen. Das Buch behandelt die verschiedenen numerischen Feldsimulationsverfahren. Mit vielen modernen Themen.},
  language  = {de}
}