@article{AggeloussisGiannakouAlbrachtetal.2010,
  author    = {Aggeloussis, Nickos and Giannakou, Erasmia and Albracht, Kirsten and Arampatzis, Adamantios},
  title     = {Reproducibility of fascicle length and pennation angle of gastrocnemius medialis in human gait in vivo},
  series = {Gait and Posture},
  volume    = {31},
  journal   = {Gait and Posture},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0966-6362},
  doi       = {10.1016/j.gaitpost.2009.08.249},
  pages     = {73 -- 77},
  year      = {2010},
  abstract  = {The purpose of the current study was to examine the reproducibility of fascicle length and pennation angle of gastrocnemius medialis while human walking. To the best of our knowledge, this is the first study of the reproducibility of fascicle length and pennation angle of gastrocnemius medialis in vivo during human gait. Twelve males performed 10 gait trials on a treadmill, in 2 separate days. B-mode ultrasonography, with the ultrasound probe firmly adjusted in the transverse and frontal planes using a special cast, was used to measure the fascicle length and the pennation angle of the gastrocnemius medialis (GM). A Vicon 624 system with three cameras operating at 120 Hz was also used to record the ankle and knee joint angles. The results showed that measurements of fascicle length and pennation angle showed high reproducibility during the gait cycle, both within the same day and between different days. Moreover, the root mean square differences between the repeated waveforms of both variables were very small, compared with their ranges (fascicle length: RMS = ∼3 mm, range: 38-63 mm; pennation angle: RMS = ∼1.5°, range: 22-32°). However, their reproducibility was lower compared to the joint angles. It was found that representative data have to be derived by a wide number of gait trials (fascicle length ∼six trials, pennation angle more than 10 trials), to assure the reliability of the fascicle length and pennation angle in human gait.},
  language  = {en}
}
@article{ArampatzisKaramanidisMademlietal.2009,
  author    = {Arampatzis, Adamantios and Karamanidis, Kiros and Mademli, Lida and Albracht, Kirsten},
  title     = {Plasticity of the human tendon to short and long-term mechanical loading},
  series = {Exercise and Sport Sciences Reviews},
  volume    = {37},
  journal   = {Exercise and Sport Sciences Reviews},
  number    = {2},
  issn      = {1538-3008},
  doi       = {10.1097/JES.0b013e31819c2e1d},
  pages     = {66 -- 72},
  year      = {2009},
  language  = {en}
}
@inproceedings{KesslerBalcGebhardt2016,
  author    = {Kessler, Julia and Balc, Nicolae and Gebhardt, Andreas},
  title     = {Basic research on lattice structures focused on the strut shape and welding beads},
  series = {Physics Procedia},
  volume    = {Vol. 83},
  booktitle = {Physics Procedia},
  issn      = {1875-3884},
  doi       = {10.1016/j.phpro.2016.08.086},
  pages     = {833 -- 838},
  year      = {2016},
  language  = {en}
}
@article{MiyamotoSatoAbeetal.2016,
  author    = {Miyamoto, Ko-Ichiro and Sato, Takuya and Abe, Minami and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Light-addressable potentiometric sensor as a sensing element in plug-based microfluidic devices},
  series = {Micromachines},
  volume    = {7},
  journal   = {Micromachines},
  number    = {7},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2072-666X},
  doi       = {10.3390/mi7070111},
  pages     = {111},
  year      = {2016},
  abstract  = {A plug-based microfluidic system based on the principle of the light-addressable potentiometric sensor (LAPS) is proposed. The LAPS is a semiconductor-based chemical sensor, which has a free addressability of the measurement point on the sensing surface. By combining a microfluidic device and LAPS, ion sensing can be performed anywhere inside the microfluidic channel. In this study, the sample solution to be measured was introduced into the channel in a form of a plug with a volume in the range of microliters. Taking advantage of the light-addressability, the position of the plug could be monitored and pneumatically controlled. With the developed system, the pH value of a plug with a volume down to 400 nL could be measured. As an example of plug-based operation, two plugs were merged in the channel, and the pH change was detected by differential measurement.},
  language  = {en}
}
@article{MahmoudiFleischhakerSahraietal.2008,
  author    = {Mahmoudi, Mohammad and Fleischhaker, Robert and Sahrai, Mostafa and Evers, J{\"o}rg},
  title     = {Group velocity control in the ultraviolet domain via interacting dark-state resonances},
  series = {Journal of physics B: Atomic, molecular and optical physics},
  volume    = {41},
  journal   = {Journal of physics B: Atomic, molecular and optical physics},
  number    = {2},
  issn      = {0953-4075},
  doi       = {10.1088/0953-4075/41/2/025504},
  pages     = {25504 -- 25600},
  year      = {2008},
  language  = {en}
}
@inproceedings{PrickingGebsFleischhakeretal.2015,
  author    = {Pricking, Sebastian and Gebs, Raphael and Fleischhaker, Robert and Kleinbauer, Jochen and Budnicki, Aleksander and Sutter, Dirk and Killi, Alexander and Weiler, Sascha and Mielke, M. and Beaudou, B. and Debord, B. and Gerome, F. and Benabid, F.},
  title     = {Hollow core fiber delivery of sub-ps pulses from a TruMicro 5000 Femto edition thin disk amplifier},
  series = {High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)},
  booktitle = {High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)},
  editor    = {Dorsch, Friedhelm},
  publisher = {SPIE, International Society for Optical Engineering},
  organization    = {The international society for optical engineering, SPIE <2, 2015, San Francisco, CA>},
  isbn      = {978-162841446-2},
  issn      = {0277-786X},
  doi       = {10.1117/12.2079289},
  pages     = {935602},
  year      = {2015},
  language  = {en}
}
@inproceedings{HecklWeilerFleischhakeretal.2014,
  author    = {Heckl, O. H. and Weiler, Sascha and Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Russ, S. and Kumkar, M. and Sutter, Dirk H.},
  title     = {Industry-grade high average power femtosecond light source},
  series = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  booktitle = {Frontiers in ultrafast optics: Biomedical, scientific, and industrial applications XIV : 1 Februar 2014, San Francisco, USA. - (SPIE proceedings series ; 8972)},
  editor    = {Heisterkamp, Alexander and Herman, Peter R. and Meunier, Michael and Nolte, Stefan},
  publisher = {SPIE, International Society for Optical Engineering},
  doi       = {10.1117/12.2039337},
  pages     = {89720P -- 89720P-7},
  year      = {2014},
  language  = {en}
}
@inproceedings{FleischhakerGebsBudnickietal.2013,
  author    = {Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Sutter, Dirk H.},
  title     = {Compact gigawatt-class sub-picosecond Yb:YAG thin-disk regenerative chirped-pulse amplifier with high average power at up to 800 kHz},
  series = {Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.},
  booktitle = {Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.},
  publisher = {IEEE Computer Society},
  isbn      = {978-1-4799-0593-5},
  doi       = {10.1109/CLEOE-IQEC.2013.6801054},
  pages     = {1},
  year      = {2013},
  language  = {en}
}
@article{FleischhakerKraussSchaettigeretal.2013,
  author    = {Fleischhaker, Robert and Krauß, Nico and Sch{\"a}ttiger, Farina and Dekorsy, Thomas},
  title     = {Consistent characterization of semiconductor saturable absorber mirrors with singe-pulse and pump-probe spectroscopy},
  series = {Optics Express},
  volume    = {21},
  journal   = {Optics Express},
  number    = {6},
  publisher = {Optica},
  address   = {Washington, DC},
  issn      = {1094-4087},
  doi       = {10.1364/OE.21.006764},
  pages     = {6764 -- 6776},
  year      = {2013},
  language  = {en}
}
@article{FleischhakerEvers2011,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg},
  title     = {A Maxwell-Schr{\"o}dinger solver for quantum optical few-level systems},
  series = {Computer Physics Communications},
  volume    = {182},
  journal   = {Computer Physics Communications},
  number    = {3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0010-4655},
  doi       = {10.1016/j.cpc.2010.10.018},
  pages     = {739 -- 747},
  year      = {2011},
  abstract  = {The msprop program presented in this work is capable of solving the Maxwell-Schr{\"o}dinger equations for one or several laser fields propagating through a medium of quantum optical few-level systems in one spatial dimension and in time. In particular, it allows to numerically treat systems in which a laser field interacts with the medium with both its electric and magnetic component at the same time. The internal dynamics of the few-level system is modeled by a quantum optical master equation which includes coherent processes due to optical transitions driven by the laser fields as well as incoherent processes due to decay and dephasing. The propagation dynamics of the laser fields is treated in slowly varying envelope approximation resulting in a first order wave equation for each laser field envelope function. The program employs an Adams predictor formula second order in time to integrate the quantum optical master equation and a Lax-Wendroff scheme second order in space and time to evolve the wave equations for the fields. The source function in the Lax-Wendroff scheme is specifically adapted to allow taking into account the simultaneous coupling of a laser field to the polarization and the magnetization of the medium. To reduce execution time, a customized data structure is implemented and explained. In three examples the features of the program are demonstrated and the treatment of a system with a phase-dependent cross coupling of the electric and magnetic field component of a laser field is shown.},
  language  = {en}
}
@article{FleischhakerEvers2008,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg},
  title     = {Nonlinear effects in pulse propagation through Doppler-broadened closed-loop atomic media},
  series = {Physical Review A - Atomic, molecular, and optical physics},
  volume    = {77},
  journal   = {Physical Review A - Atomic, molecular, and optical physics},
  number    = {4},
  issn      = {1050-2947},
  doi       = {10.1103/PhysRevA.77.043805},
  pages     = {043805},
  year      = {2008},
  language  = {en}
}
@article{FleischhakerEvers2008,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg},
  title     = {Four-wave mixing enhanced white-light cavity},
  series = {Physical Review A - Atomic, molecular, and optical physics},
  volume    = {78},
  journal   = {Physical Review A - Atomic, molecular, and optical physics},
  number    = {5},
  issn      = {0556-2791},
  pages     = {051802(R)},
  year      = {2008},
  language  = {en}
}
@article{FleischhakerEvers2009,
  author    = {Fleischhaker, Robert and Evers, J{\"o}rg},
  title     = {Phase-controlled pulse propagation in media with cross coupling of electric and magnetic probe field component},
  series = {Physical Review A - Atomic, molecular, and optical physics},
  volume    = {80},
  journal   = {Physical Review A - Atomic, molecular, and optical physics},
  number    = {6},
  issn      = {1050-2947},
  doi       = {10.1103/PHYSREVA.80.063816},
  pages     = {063816},
  year      = {2009},
  language  = {en}
}
@phdthesis{Fleischhaker2009,
  author    = {Fleischhaker, Robert},
  title     = {Light propagation in dense and chiral media},
  year      = {2009},
  language  = {en}
}
@incollection{EversFleischhakerPalffyetal.2010,
  author    = {Evers, J{\"o}rg and Fleischhaker, Robert and P{\´a}lffy, A. and Keitel, C.},
  title     = {Light propagation : From atomic to nuclear quantum optics},
  series = {Modern optics and photonics: atoms and structured media},
  booktitle = {Modern optics and photonics: atoms and structured media},
  publisher = {World Scientific Publishing Co.},
  isbn      = {978-981431327-8},
  doi       = {10.1142/9789814313278_0001},
  pages     = {3 -- 15},
  year      = {2010},
  language  = {en}
}
@article{WeldenSchejaSchoeningetal.2018,
  author    = {Welden, Rene and Scheja, Sabrina and Sch{\"o}ning, Michael Josef and Wagner, Patrick and Wagner, Torsten},
  title     = {Electrochemical Evaluation of Light-Addressable Electrodes Based on TiO2 for the Integration in Lab-on-Chip Systems},
  series = {physica status solidi a : applications and materials sciences},
  volume    = {215},
  journal   = {physica status solidi a : applications and materials sciences},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201800150},
  pages     = {Article number 1800150},
  year      = {2018},
  abstract  = {In lab-on-chip systems, electrodes are important for the manipulation (e.g., cell stimulation, electrolysis) within such systems. An alternative to commonly used electrode structures can be a light-addressable electrode. Here, due to the photoelectric effect, the conducting area can be adjusted by modification of the illumination area which enables a flexible control of the electrode. In this work, titanium dioxide based light-addressable electrodes are fabricated by a sol-gel technique and a spin-coating process, to deposit a thin film on a fluorine-doped tin oxide glass. To characterize the fabricated electrodes, the thickness, and morphological structure are measured by a profilometer and a scanning electron microscope. For the electrochemical behavior, the dark current and the photocurrent are determined for various film thicknesses. For the spatial resolution behavior, the dependency of the photocurrent while changing the area of the illuminated area is studied. Furthermore, the addressing of single fluid compartments in a three-chamber system, which is added to the electrode, is demonstrated.},
  language  = {en}
}
@article{MichauxMatternKallweit2018,
  author    = {Michaux, F. and Mattern, P. and Kallweit, Stephan},
  title     = {RoboPIV: how robotics enable PIV on a large industrial scale},
  series = {Measurement Science and Technology},
  volume    = {29},
  journal   = {Measurement Science and Technology},
  number    = {7},
  publisher = {IOP},
  address   = {Bristol},
  issn      = {1361-6501},
  doi       = {10.1088/1361-6501/aab5c1},
  pages     = {074009},
  year      = {2018},
  abstract  = {This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes. In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements.},
  language  = {en}
}
@inproceedings{SchulzeMuehleisenFeyerl2018,
  author    = {Schulze, Sven and M{\"u}hleisen, M. and Feyerl, G{\"u}nter},
  title     = {Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology},
  series = {18. Internationales Stuttgarter Symposium. Proceedings},
  booktitle = {18. Internationales Stuttgarter Symposium. Proceedings},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  doi       = {10.1007/978-3-658-21194-3},
  pages     = {75 -- 89},
  year      = {2018},
  language  = {en}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Thermocatalytic Behavior of Manganese (IV) Oxide as Nanoporous Material on the Dissociation of a Gas Mixture Containing Hydrogen Peroxide},
  series = {Nanomaterials},
  volume    = {8},
  journal   = {Nanomaterials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-4991},
  doi       = {10.3390/nano8040262},
  pages     = {Artikel 262},
  year      = {2018},
  abstract  = {In this article, we present an overview on the thermocatalytic reaction of hydrogen peroxide (H₂O₂) gas on a manganese (IV) oxide (MnO₂) catalytic structure. The principle of operation and manufacturing techniques are introduced for a calorimetric H₂O₂ gas sensor based on porous MnO₂. Results from surface analyses by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) of the catalytic material provide indication of the H₂O₂ dissociation reaction schemes. The correlation between theory and the experiments is documented in numerical models of the catalytic reaction. The aim of the numerical models is to provide further information on the reaction kinetics and performance enhancement of the porous MnO₂ catalyst.},
  language  = {en}
}
@inproceedings{JarkeGebhardtJacobsetal.1996,
  author    = {Jarke, Matthias and Gebhardt, Michael and Jacobs, Stephan and Nissen, Hans W.},
  title     = {Conflict analysis across heterogeneous viewpoints: formalization and visualization},
  series = {Proceedings of the 29th Annual Hawaii International Conference on System Sciences},
  booktitle = {Proceedings of the 29th Annual Hawaii International Conference on System Sciences},
  isbn      = {0-8186-7324-9},
  doi       = {10.1109/HICSS.1996.493191},
  pages     = {199 -- 208},
  year      = {1996},
  language  = {en}
}