@inproceedings{Herzog2007,
  author    = {Herzog, Rudolf},
  title     = {Das Oberfl{\"a}chenabflussmodell von Keser und die Grenzwertmethode : Die Abflussbildung im Vergleich.},
  year      = {2007},
  abstract  = {Dipl.-Ing. Rudolf Herzog , Rehm Software Berg / Ravensburg. 9 S. (S. 94-102). Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft a1, 2007, Aachen>. Zusammenfassung [des Autors] Die grundlegenden Ans{\"a}tze der beiden Modelle sind {\"a}hnlich. Der haupts{\"a}chliche Unterschied liegt darin, dass die Grenzwertmethode die Angabe einer Bodenart erfordert, die ihrerseits wieder Probleme verursachen kann. Es kann nicht davon ausgegangen werden, dass die Bodenarten homogen anliegen. Die ersatzweise Vorgabe einer f{\"u}r alle Einzugsgebiete einheitlichen Bodenart hilft da nicht wirklich weiter. Es stellt sich vielmehr die Frage, ob der zus{\"a}tzliche Aufwand eine signifikante Verbesserung des Ereignisses zur Folge hat. Der Vorteil der Grenzwertmethode liegt auf der Hand: Die Parameterwahl erm{\"o}glicht eine flexible Steuerung des Modells, in die Abflussbildung kann differenziert eingegriffen werden. Das NA-Geschehen kann weitgehend kalibriert werden. Es ist allerdings auch zu bedenken, dass die Flexibilit{\"a}t des Modells risikobehaftet ist - die Abflussbildung kann nach Belieben beeinflusst werden. Fazit: Flexibel in der Anwendung, bei NA-Messung empfehlenswert. Im Allgemeinen geringere Abflussmengen als Keser. Die Blackbox von Keser ist zwar nicht steuerbar, entzieht sich damit aber auch Wissensdefiziten und Manipulationseinfl{\"u}ssen. {\"U}ber Parameter und deren Auswirkungen muss nicht spekuliert werden. Wenn mehrere Personen mit dem Modell von Keser arbeiten, ergeben sich im Gegensatz zur Grenzwertmethode zwangsweise dieselben Ergebnisse - gleiche geometrische Oberfl{\"a}chendaten vorausgesetzt. Außerdem kommt Keser ohne die Bodenart aus. Fazit: Bei BFG >20\%, einfache Handhabung, geringer Aufwand. Gegen{\"u}ber der Grenzwertmethode (mittlere Verh{\"a}ltnisse) jedoch etwas h{\"o}here Abfl{\"u}sse. Das Programmpaket HYKAS der Fa. Rehm Software erm{\"o}glicht u.a. den Nachweis von Kanalnetzen und bietet in diesem Zusammenhang beide Modellans{\"a}tze zur Auswahl an. Der Programmanwender kann damit eine am Datenbestand bzw. an den Vorgaben des Auftraggebers ausgerichtete Modellauswahl treffen. Die realit{\"a}tsnahe Ermittlung der Oberfl{\"a}chenabfl{\"u}sse ist kompliziert. Weitere Unwegsamkeiten warten nach der Abflussbildung bei der Abflusskonzentration auf: Es ist z.B. die Festlegung der Fließl{\"a}nge auf der Oberfl{\"a}che erforderlich... Es ist noch ein weiter Weg bis zur Kl{\"a}ranlage.},
  subject      = {Entw{\"a}sserung <Bauwesen>},
  language  = {de}
}
@inproceedings{Kloecker2006,
  author    = {Kl{\"o}cker, Alexander},
  title     = {Das Leitungsbauunternehmen - unternehmerische Strategie als Zukunftssicherung},
  year      = {2006},
  abstract  = {In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 21-22 Zusammenfassung des Vortrags},
  subject      = {Leitungsbau},
  language  = {de}
}
@article{GosslaFalkner1999,
  author    = {Gossla, Ulrich and Falkner, H.},
  title     = {Das Gebrauchsverhalten von Betonb{\"o}den bei unterschiedlichen Bewehrungskonzepten / Falkner, H; Gossla, U.},
  series = {Industrieb{\"o}den '99 : internationales Kolloquium, 12. - 14. Januar 1999 = Industrial floors '99 / Technische Akademie Esslingen. Hrsg.: P. Seidler},
  journal   = {Industrieb{\"o}den '99 : internationales Kolloquium, 12. - 14. Januar 1999 = Industrial floors '99 / Technische Akademie Esslingen. Hrsg.: P. Seidler},
  publisher = {Technische Akademie Esslingen},
  address   = {Ostfildern},
  isbn      = {392481340X},
  pages     = {281 -- 286},
  year      = {1999},
  language  = {de}
}
@article{HoettgesWallisGuymer1992,
  author    = {H{\"o}ttges, J{\"o}rg and Wallis, Steve G. and Guymer, Ian},
  title     = {Das ATZ-Modell zur Vorhersage des Schadstofftransports in Fl{\"u}ssen},
  series = {Wasserwirtschaft. 82 (1992), H. 10},
  journal   = {Wasserwirtschaft. 82 (1992), H. 10},
  isbn      = {0043-0978},
  pages     = {494 -- 497},
  year      = {1992},
  language  = {de}
}
@incollection{DuffnerUibelPetersonetal.2023,
  author    = {Duffner, Markus and Uibel, Thomas and Peterson, Leif Arne and Moorkamp, Wilfried},
  title     = {Cross Layers Light - Ein ressourceneffizientes und recyclebares Holz-Wandsystem},
  series = {Bauphysik Kalender 2023: Nachhaltigkeit},
  booktitle = {Bauphysik Kalender 2023: Nachhaltigkeit},
  editor    = {Fouad, Nabil A.},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {9783433033890 (Print)},
  doi       = {10.1002/9783433611289.ch13},
  pages     = {483 -- 501},
  year      = {2023},
  abstract  = {Ein neues tragendes, lagenweise aufgebautes Holzbau-Wandsystem und seine {\"o}konomische und statische Entwicklung werden vorgestellt. Randbedingungen wie Nachhaltigkeit, Ressourceneffizienz und eine beanspruchungsadaptive Konstruktionsweise sind f{\"u}r diese innovative Bauteilentwicklung von zentraler Bedeutung. Eine wesentliche Herausforderung ist die Herstellung der Verbindung der Lagen untereinander zu einem bauphysikalisch und statisch leistungsf{\"a}higen Wandsystem. Die Tragf{\"a}higkeit und Steifigkeit verschiedener Verbindungsvarianten wurden ebenso wie die Eigenschaften der Wandelemente analytisch, numerisch und experimentell untersucht.},
  language  = {de}
}
@inproceedings{JockwerKleiberUibel2018,
  author    = {Jockwer, R. and Kleiber, M. and Uibel, Thomas},
  title     = {Criteria for Evaluating the Simplification of Design Rules for Dowel-type Fasteners},
  series = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  booktitle = {International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia},
  editor    = {G{\"o}rlacher, Rainer},
  publisher = {Timber Scientific Publishing, KIT Holzbau und Baukonstruktionen},
  address   = {Karlsruhe},
  pages     = {461 -- 466},
  year      = {2018},
  language  = {en}
}
@article{WoliszSchuetzBlankeetal.2017,
  author    = {Wolisz, Henryk and Sch{\"u}tz, Thomas and Blanke, Tobias and Hagenkamp, Markus and Kohrn, Markus and Wesseling, Mark and M{\"u}ller, Dirk},
  title     = {Cost optimal sizing of smart buildings' energy system components considering changing end-consumer electricity markets},
  series = {Energy},
  volume    = {137},
  journal   = {Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.energy.2017.06.025},
  pages     = {715 -- 728},
  year      = {2017},
  language  = {en}
}
@article{BienerSasse1994,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Construction of composite lining systems under unfavourable weather conditions},
  series = {Landfilling of waste: barriers / ed. by T. H. Christensen; R. Cossu; R. Stegmann. - 1. Aufl.},
  journal   = {Landfilling of waste: barriers / ed. by T. H. Christensen; R. Cossu; R. Stegmann. - 1. Aufl.},
  publisher = {Spon},
  address   = {London [u.a.]},
  isbn      = {0419159908},
  pages     = {183 -- 200},
  year      = {1994},
  language  = {en}
}
@article{BienerSasse1993,
  author    = {Biener, Ernst and Sasse, T.},
  title     = {Construction and rehabilitation of landfill shafts},
  series = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1},
  journal   = {Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1},
  publisher = {CISA, Environmental Sanitary Engineering Centre},
  address   = {Cagliari},
  pages     = {451 -- 460},
  year      = {1993},
  language  = {en}
}
@article{CheenakulaGriebelMontagetal.2023,
  author    = {Cheenakula, Dheeraja and Griebel, Kai and Montag, David and Gr{\"o}mping, Markus},
  title     = {Concept development of a mainstream deammonification and comparison with conventional process in terms of energy, performance and economical construction perspectives},
  series = {Frontiers in Microbiology},
  volume    = {14},
  journal   = {Frontiers in Microbiology},
  number    = {11155235},
  editor    = {Huang, Xiaowu},
  publisher = {Frontiers},
  issn      = {1664-302X},
  doi       = {10.3389/fmicb.2023.1155235},
  pages     = {1 -- 15},
  year      = {2023},
  abstract  = {Deammonification for nitrogen removal in municipal wastewater in temperate and cold climate zones is currently limited to the side stream of municipal wastewater treatment plants (MWWTP). This study developed a conceptual model of a mainstream deammonification plant, designed for 30,000 P.E., considering possible solutions corresponding to the challenging mainstream conditions in Germany. In addition, the energy-saving potential, nitrogen elimination performance and construction-related costs of mainstream deammonification were compared to a conventional plant model, having a single-stage activated sludge process with upstream denitrification. The results revealed that an additional treatment step by combining chemical precipitation and ultra-fine screening is advantageous prior the mainstream deammonification. Hereby chemical oxygen demand (COD) can be reduced by 80\% so that the COD:N ratio can be reduced from 12 to 2.5. Laboratory experiments testing mainstream conditions of temperature (8-20°C), pH (6-9) and COD:N ratio (1-6) showed an achievable volumetric nitrogen removal rate (VNRR) of at least 50 gN/(m3∙d) for various deammonifying sludges from side stream deammonification systems in the state of North Rhine-Westphalia, Germany, where m3 denotes reactor volume. Assuming a retained Norganic content of 0.0035 kgNorg./(P.E.∙d) from the daily loads of N at carbon removal stage and a VNRR of 50 gN/(m3∙d) under mainstream conditions, a resident-specific reactor volume of 0.115 m3/(P.E.) is required for mainstream deammonification. This is in the same order of magnitude as the conventional activated sludge process, i.e., 0.173 m3/(P.E.) for an MWWTP of size class of 4. The conventional plant model yielded a total specific electricity demand of 35 kWh/(P.E.∙a) for the operation of the whole MWWTP and an energy recovery potential of 15.8 kWh/(P.E.∙a) through anaerobic digestion. In contrast, the developed mainstream deammonification model plant would require only a 21.5 kWh/(P.E.∙a) energy demand and result in 24 kWh/(P.E.∙a) energy recovery potential, enabling the mainstream deammonification model plant to be self-sufficient. The retrofitting costs for the implementation of mainstream deammonification in existing conventional MWWTPs are nearly negligible as the existing units like activated sludge reactors, aerators and monitoring technology are reusable. However, the mainstream deammonification must meet the performance requirement of VNRR of about 50 gN/(m3∙d) in this case.},
  language  = {en}
}
@article{LaumannKindmann2004,
  author    = {Laumann, J{\"o}rg and Kindmann, Rolf},
  title     = {Computerorientierte L{\"o}sung von Stabilit{\"a}ts¬problemen im Bauwesen / Kindmann, R. ; Laumann, J.},
  series = {Computer im Bauwesen : Festschrift zum 60. Geburtstag von Prof. Hartmann / Karlheinz Lehner (Hrsg.)},
  journal   = {Computer im Bauwesen : Festschrift zum 60. Geburtstag von Prof. Hartmann / Karlheinz Lehner (Hrsg.)},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8322-2478-5},
  pages     = {15 -- 24},
  year      = {2004},
  language  = {de}
}
@inproceedings{OertelBung2013,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Comparison of 2D dam-break waves with VOF and SPH method},
  series = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11113},
  year      = {2013},
  language  = {en}
}
@article{HoettgesArnoldRouve1989,
  author    = {H{\"o}ttges, J{\"o}rg and Arnold, Uwe and Rouv{\´e}, Gerhard},
  title     = {Combined Digital Image and Finite Element Analysis of Mixing in Compound Open Channel Flow / Arnold, U.; J. H{\"o}ttges; G. Rouv{\´e}},
  series = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur},
  journal   = {Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur},
  publisher = {Universal Acad. Press},
  address   = {Tokyo},
  isbn      = {4-946443-03-7},
  pages     = {569 -- 576},
  year      = {1989},
  language  = {en}
}
@article{ValeroBungCrookston2019,
  author    = {Valero, D. and Bung, Daniel B. and Crookston, B. M.},
  title     = {Closure to "Energy Dissipation of a Type III Basin under Design and Adverse Conditions for Stepped and Smooth Spillways"},
  series = {Journal of Hydraulic Engineering},
  volume    = {146},
  journal   = {Journal of Hydraulic Engineering},
  number    = {2},
  publisher = {ASCE},
  address   = {Reston, Va.},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001669},
  year      = {2019},
  language  = {en}
}
@article{Jochim2002,
  author    = {Jochim, Haldor E.},
  title     = {Charging rail operators for delays - how not to do it},
  series = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  journal   = {Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. M{\"o}hlenbrink ... (eds.)},
  publisher = {FOVUS},
  address   = {Stuttgart},
  isbn      = {3893010858},
  year      = {2002},
  language  = {en}
}
@inproceedings{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Characteristics of cross-bar block ramp flows},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@incollection{MelznerFerger2024,
  author    = {Melzner, J{\"u}rgen and Ferger, Martin},
  title     = {Building Information Modeling},
  series = {Zahlentafeln f{\"u}r den Baubetrieb},
  booktitle = {Zahlentafeln f{\"u}r den Baubetrieb},
  editor    = {Krause, Thomas and Ulke, Bernd and Ferger, Martin},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  isbn      = {978-3-658-41329-3 (Print)},
  doi       = {10.1007/978-3-658-41330-9_15},
  pages     = {1051 -- 1073},
  year      = {2024},
  abstract  = {Durch die Einf{\"u}hrung von Building Information Modeling (BIM) sowohl projektspezifisch als auch in ganze Unternehmungen hat die Baubranche einen weitreichenden Ver{\"a}nderungsprozess angestoßen. Building Information Modeling kann als eine Methode angesehen werden, um die Informationsasymmetrien zwischen den Projektbeteiligten so gering wie m{\"o}glich zu halten.},
  language  = {de}
}
@techreport{SansomLawsonTuchoetal.2016,
  author    = {Sansom, M. and Lawson, R.M. and Tucho, R. and Kendrick, C. and Ogden, R. and Resalati, S. and Garay, R. and D{\"o}ring, Bernd and Reger, V. and Gilbert, J. and Heikkinen, J. and Hemmila, K.},
  title     = {Building in active thermal mass into steel structures (BATIMASS) - EUR 28166EN},
  publisher = {Publications Office of the European Union},
  address   = {Luxembourg},
  organization    = {European Commission},
  isbn      = {978-92-79-63176-4},
  issn      = {1831-9424},
  doi       = {10.2777/25999},
  pages     = {147 Seiten},
  year      = {2016},
  abstract  = {The main objective of the BATIMASS project was to address how the energy balance in relatively lightweight steel buildings can be improved by building in 'active thermal mass' (ATM) into the building fabric. This was achieved through concept design, dynamic thermal modelling and testing of a number of potentially viable systems and concepts. A significant programme of thermal simulation modelling was undertaken utilising the thermally equivalent slab (TES) concept to model the passive thermal capacity effect of profiled, composite metal floor decks. It is apparent from the modelling results that thermal mass is a highly complex phenomenon which is highly dependent upon building type, occupancy patterns, climate and many other aspects of the building design and servicing strategy. The ATM systems developed, both conceptually and for prototype testing, focussed on water-cooled composite slabs, the Cofradal floor system and the phase change material (PCM) Energain. In addition to laboratory testing of prototypes, whole building monitoring was undertaken at the Kubik building in Spain and the RWTH test building in Germany. Advanced thermal modelling was also undertaken to estimate the likely benefits of the ATM concept designs developed and for comparison with the test results. In addition to thermal testing, structural tests were conducted on composite floor specimens incorporating embedded water pipes. This Final Report presents the results of the activities carried out under this RFCS contract RFSR CT 2012 00033. The work carried out is reported in six major sections corresponding to the technical Work Packages of the project. Only summaries of the work carried out are provided in this report; all work undertaken is fully reported in the formal project deliverables.},
  language  = {en}
}
@book{BlassUibel2009,
  author    = {Blaß, Hans Joachim and Uibel, Thomas},
  title     = {BSPhandbuch : Holz-Massivbauweise in Brettsperrholz; Nachweise auf Basis des neuen europ{\"a}ischen Normenkonzepts},
  editor    = {Schickhofer, Gerhard},
  publisher = {Verl. der Techn. Univ.},
  address   = {Graz},
  isbn      = {978-3-85125-076-3},
  pages     = {[ca. 353] S. in getr. Z{\"a}hlung : Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@article{Gossla2000,
  author    = {Gossla, Ulrich},
  title     = {Br{\"u}ckenbau in Japan. Faserverbundwerkstoffe fuer neuartige Hybridenkonstruktionen},
  series = {Trends und Entwicklungen im Bauwesen / Braunschweiger Bauseminar 2000, 9. und 10. November. Institut f{\"u}r Baustoffe, Massivbau und Brandschutz, IBMBM, TU Braunschweig ; Materialpr{\"u}fanstalt f{\"u}r das Bauwesen - MPA Braunschweig. Wiss. Leitung: Horst Falkner ; Manfred Teutsch},
  journal   = {Trends und Entwicklungen im Bauwesen / Braunschweiger Bauseminar 2000, 9. und 10. November. Institut f{\"u}r Baustoffe, Massivbau und Brandschutz, IBMBM, TU Braunschweig ; Materialpr{\"u}fanstalt f{\"u}r das Bauwesen - MPA Braunschweig. Wiss. Leitung: Horst Falkner ; Manfred Teutsch},
  publisher = {IBMB, Bibliothek},
  address   = {Braunschweig},
  isbn      = {3-89288-131-6},
  pages     = {119 -- 126},
  year      = {2000},
  language  = {de}
}