@incollection{CresserHaegerLeuchsetal.1982, author = {Cresser, J. D. and H{\"a}ger, J. and Leuchs, G. and Rateike, Franz-Matthias and Walther, H.}, title = {Resonance fluorescence of atoms in strong monochromatic laser fields}, series = {Dissipative systems in quantum optics. Ed. by Rodolfo Bonifacio. Topics in current physics. Vol. 27}, booktitle = {Dissipative systems in quantum optics. Ed. by Rodolfo Bonifacio. Topics in current physics. Vol. 27}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-642-81719-9}, doi = {10.1007/978-3-642-81717-5_3}, pages = {21 -- 59}, year = {1982}, abstract = {The investigation of atomic resonance fluorescence has always been of special interest as a means for the determination of atomic parameters. In addition, information on the interaction mechanism between atoms and radiation can be obtained. In the standard fluorescence experiment the frequency distribution of the incident photons is larger than the natural width of the respective transition; as a consequence the correlation time in the photon-atom interaction is determined by the lifetime of the atoms in the excited state. With the development of lasers and especially of tunable dye lasers in recent years it became possible to study the case where the incident radiation has a spectral distribution which is narrower than the natural width. This corresponds to a correlation time of the incoming light wave which is much longer than the excited-state lifetime. In this chapter a survey of experiments on the resonance fluorescence of atoms in monochromatic laser fields will be given.}, language = {en} } @incollection{ClassenDoerenCodanietal.2000, author = {Claßen, R. and D{\"o}ren, Horst-Peter and Codani, L. and Watermeyer, Klaus}, title = {Begleitende Untersuchungen beim L{\"o}ten mit vor{\"u}bergehend fl{\"u}ssiger Phase (TL PB) einschließlich Aktivkomponente an Verbindungen verschiedener Kupfer- und Kohlenstoffwerkstoffe (CFC).}, series = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.}, booktitle = {Fortschritte in der Metallographie. Vortragstexte der 33. Metallographie-Tagung, 15.-17. September 1999 in Rostock. Hrsg. Gerhard Schneider... Praktische Metallographie. Sonderband 31.}, publisher = {Werkstoff-Informationsgesellschaft}, address = {Frankfurt}, pages = {97 -- 104}, year = {2000}, language = {de} } @inproceedings{ChurilovDumovaJovanoskaButenweg2013, author = {Churilov, Sergej and Dumova-Jovanoska, Elena and Butenweg, Christoph}, title = {Seismic verification of existing masonry buildings and strengthening with reinforced concrete jackets}, series = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)}, booktitle = {Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)}, editor = {Adam, Christoph and Heuer, Rudolf and Lenhardt, Wolfgang and Schranz, Christian}, isbn = {978-3-902749-04-8}, year = {2013}, abstract = {A methodology for assessment, seismic verification and strengthening of existing masonry buildings is presented in this paper. The verification is performed using a calculation model calibrated with the results from ambient vibration measurements. The calibrated model serves as an input for a deformation-based verification procedure based on the Capacity Spectrum Method (CSM). The bearing capacity of the building is calculated from experimental capacity curves of the individual walls idealized with bilinear elastic-perfectly plastic curves. The experimental capacity curves were obtained from in-plane cyclic loading tests on unreinforced and strengthened masonry walls with reinforced concrete jackets. The seismic action is compared with the load-bearing capacity of the building considering non-linear material behavior with its post-peak capacity. The application of the CSM to masonry buildings and the influence of a traditional strengthening method are demonstrated on the example of a public school building in Skopje, Macedonia.}, language = {en} } @article{ChudobaKuhlmannButenweg2001, author = {Chudoba, Rostislav and Kuhlmann, Wolfram and Butenweg, Christoph}, title = {Ein technisches Informationssystem zur Entwicklung von Textilbeton}, series = {Bauinformatik-Journal : bi-Journal; Zeitschrift f{\"u}r Architekten und Ingenieure}, volume = {Bd. 4}, journal = {Bauinformatik-Journal : bi-Journal; Zeitschrift f{\"u}r Architekten und Ingenieure}, number = {H. 6}, issn = {1436-9060}, pages = {15 -- 20}, year = {2001}, language = {de} } @inproceedings{ChudobaKuhlmannButenweg2001, author = {Chudoba, Rostislav and Kuhlmann, Wolfram and Butenweg, Christoph}, title = {Ein internetbasiertes technisches Informationssystem zur Koordination und Pr{\"a}sentation des Sonderforschungsbereichs 532}, series = {Forum Bauinformatik 2001 - Junge Wissenschaftler Forschen / Richard Romberg .̤ (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; Nr. 169)}, booktitle = {Forum Bauinformatik 2001 - Junge Wissenschaftler Forschen / Richard Romberg .̤ (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; Nr. 169)}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, organization = {Forum Bauinformatik <2001>}, isbn = {3-18-316904-5}, pages = {94 -- 101}, year = {2001}, language = {de} } @inproceedings{ChudobaButenwegPfeiffer2003, author = {Chudoba, Rostislav and Butenweg, Christoph and Pfeiffer, Frank}, title = {Textile reinforced concrete. Part I: Process model for collaborative research and development}, series = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke}, booktitle = {Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universit{\"a}t Weimar. Ed.: K. G{\"u}rlebeck; L. Hempel; C. K{\"o}nke}, publisher = {IKM}, address = {Weimar}, organization = {Internationales Kolloquium {\"u}ber Anwendungen der Informatik und Mathematik in Architektur und Bauwesen <16, 2003, Weimar>}, pages = {1 -- 8}, year = {2003}, language = {en} } @article{ChudobaButenwegPeiffer2004, author = {Chudoba, Rostislav and Butenweg, Christoph and Peiffer, F.}, title = {Technical information system for collaborative material research}, series = {Advances in engineering software}, volume = {Volume 35}, journal = {Advances in engineering software}, number = {Issue 10-11}, issn = {1873-5339 (E-Journal); 0965-9978 (Print)}, doi = {10.1016/j.advengsoft.2004.03.021}, pages = {747 -- 756}, year = {2004}, language = {en} } @inproceedings{ChudobaButenwegKuhlmann2002, author = {Chudoba, Rostislav and Butenweg, Christoph and Kuhlmann, Wolfram}, title = {Technical information system for collaborative material research}, series = {Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]}, booktitle = {Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]}, organization = {International Conference on Computational Structures Technology <6, 2002, Prag>}, pages = {1 -- 11}, year = {2002}, language = {en} } @article{ChenClauserMarquartetal.2015, author = {Chen, Tao and Clauser, Christoph and Marquart, Gabriele and Willbrand, Karen and Mottaghy, Darius}, title = {A new upscaling method for fractured porous media}, series = {Advances in Water Resources}, volume = {80}, journal = {Advances in Water Resources}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0309-1708}, doi = {10.1016/j.advwatres.2015.03.009}, pages = {60 -- 68}, year = {2015}, language = {en} } @article{CheenakulaHoffstadtKrafftetal.2022, author = {Cheenakula, Dheeraja and Hoffstadt, Kevin and Krafft, Simone and Reinecke, Diana and Klose, Holger and Kuperjans, Isabel and Gr{\"o}mping, Markus}, title = {Anaerobic digestion of algal-bacterial biomass of an Algal Turf Scrubber system}, series = {Biomass Conversion and Biorefinery}, volume = {13}, journal = {Biomass Conversion and Biorefinery}, publisher = {Springer}, address = {Berlin}, issn = {2190-6823}, doi = {10.1007/s13399-022-03236-z}, pages = {15 Seiten}, year = {2022}, abstract = {This study investigated the anaerobic digestion of an algal-bacterial biofilm grown in artificial wastewater in an Algal Turf Scrubber (ATS). The ATS system was located in a greenhouse (50°54′19ʺN, 6°24′55ʺE, Germany) and was exposed to seasonal conditions during the experiment period. The methane (CH4) potential of untreated algal-bacterial biofilm (UAB) and thermally pretreated biofilm (PAB) using different microbial inocula was determined by anaerobic batch fermentation. Methane productivity of UAB differed significantly between microbial inocula of digested wastepaper, a mixture of manure and maize silage, anaerobic sewage sludge, and percolated green waste. UAB using sewage sludge as inoculum showed the highest methane productivity. The share of methane in biogas was dependent on inoculum. Using PAB, a strong positive impact on methane productivity was identified for the digested wastepaper (116.4\%) and a mixture of manure and maize silage (107.4\%) inocula. By contrast, the methane yield was significantly reduced for the digested anaerobic sewage sludge (50.6\%) and percolated green waste (43.5\%) inocula. To further evaluate the potential of algal-bacterial biofilm for biogas production in wastewater treatment and biogas plants in a circular bioeconomy, scale-up calculations were conducted. It was found that a 0.116 km2 ATS would be required in an average municipal wastewater treatment plant which can be viewed as problematic in terms of space consumption. However, a substantial amount of energy surplus (4.7-12.5 MWh a-1) can be gained through the addition of algal-bacterial biomass to the anaerobic digester of a municipal wastewater treatment plant. Wastewater treatment and subsequent energy production through algae show dominancy over conventional technologies.}, language = {en} } @inproceedings{CaminosSchmitzAttietal.2022, author = {Caminos, Ricardo Alexander Chico and Schmitz, Pascal and Atti, Vikrama and Mahdi, Zahra and Teixeira Boura, Cristiano Jos{\´e} and Sattler, Johannes Christoph and Herrmann, Ulf and Hilger, Patrick and Dieckmann, Simon}, title = {Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method}, series = {SOLARPACES 2020}, booktitle = {SOLARPACES 2020}, number = {2445 / 1}, publisher = {AIP conference proceedings / American Institute of Physics}, address = {Melville, NY}, isbn = {978-0-7354-4195-8}, issn = {1551-7616 (online)}, doi = {10.1063/5.0086262}, pages = {8 Seiten}, year = {2022}, abstract = {The Solar-Institut J{\"u}lich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called "micro heliostat". Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.}, language = {en} } @inproceedings{CacciatoreButenweg2020, author = {Cacciatore, Pamela and Butenweg, Christoph}, title = {Seismic safety of cylindrical granular material steel silos under seismic loading}, series = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)}, booktitle = {Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)}, isbn = {978-3-86359-729-0}, pages = {231 -- 244}, year = {2020}, language = {en} } @inproceedings{BoehmHellmannsBackesetal.2006, author = {B{\"o}hm, Stefan and Hellmanns, Mark and Backes, Andreas and Dilger, Klaus}, title = {Lock-in thermography based NDT of automotive parts}, series = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China}, booktitle = {Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China}, publisher = {Beijing Adhesion Society of China}, address = {Beijing}, pages = {382 -- 384}, year = {2006}, language = {en} } @article{BoehmHellmannsBackesetal.2006, author = {B{\"o}hm, Stefan and Hellmanns, Mark and Backes, Andreas and Dilger, Klaus}, title = {Lock-in thermography based NDT of parts for the automotive industry}, series = {Journal of adhesion and interface}, volume = {Vol. 7}, journal = {Journal of adhesion and interface}, number = {No. 4}, pages = {10 -- 12}, year = {2006}, language = {en} } @inproceedings{ButenwegThierauf1996, author = {Butenweg, Christoph and Thierauf, Georg}, title = {Erfahrungen bei der Entwicklung eines objekt-orientierten FE-Programmes}, series = {Forum Bauinformatik - Junge Wissenschaftler Forschen : Cottbus '96 / Olaf Horstmann ... (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; 135)}, booktitle = {Forum Bauinformatik - Junge Wissenschaftler Forschen : Cottbus '96 / Olaf Horstmann ... (Hrsg.) (Fortschrittberichte VDI : Reihe 4, Bauingenieurwesen ; 135)}, publisher = {VDI-Verlag}, address = {D{\"u}sseldorf}, isbn = {3-18-313504-3}, pages = {60 -- 65}, year = {1996}, language = {de} } @inproceedings{ButenwegThierauf1997, author = {Butenweg, Christoph and Thierauf, Georg}, title = {Optimum cost design of reinforced concrete structures using parallel computing}, series = {Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping}, booktitle = {Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping}, publisher = {Saxe-Coburg Publication}, address = {Edinburgh}, organization = {Euro-Conference on Parallel and Distributed Computing for Computational Mechanics <1, 1997, Lochinver, Scotland>}, isbn = {0-948749-47-4}, pages = {197 -- 202}, year = {1997}, language = {en} } @inproceedings{ButenwegThierauf1998, author = {Butenweg, Christoph and Thierauf, Georg}, title = {Optimum design of reinforced concrete structures}, series = {Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping}, booktitle = {Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping}, publisher = {Civil-Comp Press}, address = {Edinburgh}, organization = {International Conference on Computational Structures Technology <4, 1998, Edinburgh>}, isbn = {0-948749-57-1}, pages = {447 -- 458}, year = {1998}, language = {en} } @inproceedings{ButenwegThierauf1999, author = {Butenweg, Christoph and Thierauf, Georg}, title = {Bemessung und Kostenoptimierung von Stahlbetontragwerken}, series = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)}, booktitle = {Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. M{\"a}rz 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)}, publisher = {Balkema}, address = {Rotterdam}, organization = {Fachtagung Baustatik, Baupraxis <7, 1999, Aachen>}, isbn = {90-5809-044-2}, pages = {213 -- 220}, year = {1999}, language = {de} } @incollection{ButenwegThierauf1999, author = {Butenweg, Christoph and Thierauf, G.}, title = {Automatic design of reinforced concrete structures with parallel computing}, series = {Innovative computational methods for structural mechanics}, booktitle = {Innovative computational methods for structural mechanics}, editor = {Papadrakakis, M. and Topping, B.H.V.}, publisher = {Saxe-Coburg Publication}, address = {Edinburgh}, isbn = {1-874672-05-9}, doi = {10.4203/csets.1.14}, pages = {305 -- 318}, year = {1999}, abstract = {A concept for the analysis and optimal design of reinforced concrete structures is described. It is based on a nonlinear optimization algorithm and a finite element program for linear and nonlinear analysis of structures. With the aim of minimal cost design a two stage optimization using efficient gradient algorithm is developed. The optimization problems on global (structural) and local (crosssectional) level are formulated. A parallelization concept for solving the two stage optimization problem in minimal time is presented. Examples are included to illustrate the practical use and the effectively of the parallelization in the area of engineering design.}, language = {en} } @article{ButenwegSchmittRosen2014, author = {Butenweg, Christoph and Schmitt, Timo and Rosen, Britta}, title = {Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme}, series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik}, volume = {89 (2014)}, journal = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik}, number = {Heft 7/8}, publisher = {VDI Fachmedien}, address = {D{\"u}sseldorf}, issn = {0005-6650}, pages = {316 -- 324}, year = {2014}, language = {de} }