@inproceedings{BurgazziFioriniDeMagistrisetal.1998,
  author    = {Burgazzi, L. and Fiorini, F. and De Magistris, W. (u.a.) and Lensa, W. von and Staat, Manfred and Altes, J.},
  title     = {Reliability Assessment of Passive Safety Systems},
  series = {Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.},
  booktitle = {Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.},
  publisher = {American Society of Mechanical Engineers},
  address   = {New York},
  year      = {1998},
  language  = {en}
}
@book{Stulpe1986,
  author    = {Stulpe, Werner},
  title     = {Bedingte Erwartungen und stochastische Prozesse in der generalisierten Wahrscheinlichkeitstheorie : Beschreibung sukzessiver Messungen mit zuf{\"a}lligem Ausgang},
  address   = {Berlin},
  pages     = {199 S.},
  year      = {1986},
  language  = {de}
}
@book{Laack2015,
  author    = {Laack, Walter van},
  title     = {Unser Schl{\"u}ssel zur Ewigkeit},
  publisher = {van Laack},
  address   = {Aachen},
  isbn      = {978-3-936624-16-8},
  pages     = {316 S.},
  year      = {2015},
  language  = {de}
}
@inproceedings{BallmannRaatschenStaat1985,
  author    = {Ballmann, J. and Raatschen, Hans-J{\"u}rgen and Staat, Manfred},
  title     = {High stress intensities in focussing zones of waves},
  doi       = {10.1016/B978-0-444-42520-1.50015-3},
  year      = {1985},
  abstract  = {The propagation of mechanical waves in plates of isotropic elastic material is investigated. After a short introduction to the understanding of focussing of stress waves in a plate with a curved boundary the method of characteristics is applied to a plate of hyperelastic material. Using this method the propagation of acceleration waves is discussed. Based on this a numerical difference scheme is developed for solving initial-boundary-value problems and applied to two examples: propagation of a point disturbance in a homogeneously finitely strained non-linear elastic plate and geometrical focussing in al linear elastic plate.},
  subject      = {Technische Mechanik},
  language  = {en}
}
@article{Laack2013,
  author    = {Laack, Walter van},
  title     = {Why natural constants are as they are},
  series = {British journal of arts and social sciences},
  volume    = {Vol. 15},
  journal   = {British journal of arts and social sciences},
  number    = {Nr. 2},
  publisher = {BritishJournal Publ. Inc},
  address   = {London},
  issn      = {2046-9578 (E-Journal)},
  pages     = {198 -- 203},
  year      = {2013},
  language  = {en}
}
@article{StaatHeitzer1997,
  author    = {Staat, Manfred and Heitzer, M.},
  title     = {Limit and Shakedown Analysis for Plastic Safety of Complex Structures},
  series = {Transactions of the 14th International Conference on Structural Dynamics in Reactor Technology (SMiRT-14) / Livolant, M. [ed]},
  journal   = {Transactions of the 14th International Conference on Structural Dynamics in Reactor Technology (SMiRT-14) / Livolant, M. [ed]},
  address   = {Lyon},
  pages     = {33 -- 40},
  year      = {1997},
  language  = {en}
}
@inproceedings{BhattaraiFrotscherStaat2016,
  author    = {Bhattarai, Aroj and Frotscher, Ralf and Staat, Manfred},
  title     = {Significance of fibre geometry on passive-active response of pelvic muscles to evaluate pelvic dysfunction},
  series = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  booktitle = {BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health},
  editor    = {Natal Jorge, Renato},
  publisher = {CRC Press},
  address   = {Boca Raton},
  isbn      = {978-1-138-02910-1},
  pages     = {185 -- 188},
  year      = {2016},
  language  = {en}
}
@article{StulpeGudderHagler1988,
  author    = {Stulpe, Werner and Gudder, S. and Hagler, J.},
  title     = {An Uncertainty Relation for Joint Position-Momentum Measurements},
  series = {Foundations of Physics Letters. 1 (1988), H. 3},
  journal   = {Foundations of Physics Letters. 1 (1988), H. 3},
  isbn      = {1572-9524},
  pages     = {287 -- 292},
  year      = {1988},
  language  = {en}
}
@inproceedings{BlaneckBornheimGriegeretal.2022,
  author    = {Blaneck, Patrick Gustav and Bornheim, Tobias and Grieger, Niklas and Bialonski, Stephan},
  title     = {Automatic readability assessment of german sentences with transformer ensembles},
  series = {Proceedings of the GermEval 2022 Workshop on Text Complexity Assessment of German Text},
  booktitle = {Proceedings of the GermEval 2022 Workshop on Text Complexity Assessment of German Text},
  publisher = {Association for Computational Linguistics},
  address   = {Potsdam},
  doi       = {10.48550/arXiv.2209.04299},
  pages     = {57 -- 62},
  year      = {2022},
  abstract  = {Reliable methods for automatic readability assessment have the potential to impact a variety of fields, ranging from machine translation to self-informed learning. Recently, large language models for the German language (such as GBERT and GPT-2-Wechsel) have become available, allowing to develop Deep Learning based approaches that promise to further improve automatic readability assessment. In this contribution, we studied the ability of ensembles of fine-tuned GBERT and GPT-2-Wechsel models to reliably predict the readability of German sentences. We combined these models with linguistic features and investigated the dependence of prediction performance on ensemble size and composition. Mixed ensembles of GBERT and GPT-2-Wechsel performed better than ensembles of the same size consisting of only GBERT or GPT-2-Wechsel models. Our models were evaluated in the GermEval 2022 Shared Task on Text Complexity Assessment on data of German sentences. On out-of-sample data, our best ensemble achieved a root mean squared error of 0:435.},
  language  = {en}
}
@article{GrajewskiHronTurek2005,
  author    = {Grajewski, Matthias and Hron, Jaroslav and Turek, Stefan},
  title     = {Dual weighted a posteriori error estimation for a new nonconforming linear finite element on quadrilaterals},
  series = {Applied Numerical Mathematics},
  volume    = {54},
  journal   = {Applied Numerical Mathematics},
  number    = {3-4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-9274},
  doi       = {10.1016/j.apnum.2004.09.016},
  pages     = {504 -- 518},
  year      = {2005},
  abstract  = {After a short introduction of a new nonconforming linear finite element on quadrilaterals recently developed by Park, we derive a dual weighted residual-based a posteriori error estimator (in the sense of Becker and Rannacher) for this finite element. By computing a corresponding dual solution we estimate the error with respect to a given target error functional. The reliability and efficiency of this estimator is analyzed in several numerical experiments.},
  language  = {en}
}
@article{DefosseKleinschmidtSchmutzetal.2022,
  author    = {Defosse, Jerome and Kleinschmidt, Joris and Schmutz, Axel and Loop, Torsten and Staat, Manfred and Gatzweiler, Karl-Heinz and Wappler, Frank and Schieren, Mark},
  title     = {Dental strain on maxillary incisors during tracheal intubation with double-lumen tubes and different laryngoscopy techniques - a blinded manikin study},
  series = {Journal of Cardiothoracic and Vascular Anesthesia},
  volume    = {36},
  journal   = {Journal of Cardiothoracic and Vascular Anesthesia},
  number    = {8, Part B},
  publisher = {Elsevier},
  address   = {New York, NY},
  issn      = {1053-0770},
  doi       = {10.1053/j.jvca.2022.02.017},
  pages     = {3021 -- 3027},
  year      = {2022},
  language  = {en}
}
@article{ArtmannDigelZerlinetal.2009,
  author    = {Artmann, Gerhard and Digel, Ilya and Zerlin, Kay and Maggakis-Kelemen, Christina and Linder, Peter and Porst, Dariusz and Kayser, Peter and Stadler, David and Dikta, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Hemoglobin senses body temperature},
  series = {European Biophysics Journal},
  volume    = {38},
  journal   = {European Biophysics Journal},
  number    = {5},
  isbn      = {0175-7571},
  pages     = {589 -- 600},
  year      = {2009},
  language  = {en}
}
@article{DemirciTrzewikLinderetal.2004,
  author    = {Demirci, T. and Trzewik, J. and Linder, Peter and Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l},
  title     = {Mechanical Stimulation of 3T3 Fibroblasts Activates Genes: Real Time PCR Products and Suppliers by Comparison},
  series = {Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2},
  journal   = {Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2},
  isbn      = {0932-4666},
  pages     = {1046 -- 1047},
  year      = {2004},
  language  = {en}
}
@article{KowalskiLinderZierkeetal.2016,
  author    = {Kowalski, Julia and Linder, Peter and Zierke, S. and Wulfen, B. van and Clemens, J. and Konstantinidis, K. and Ameres, G. and Hoffmann, R. and Mikucki, J. and Tulaczyk, S. and Funke, O. and Blandfort, D. and Espe, Clemens and Feldmann, Marco and Francke, Gero and Hiecker, S. and Plescher, Engelbert and Sch{\"o}ngarth, Sarah and Dachwald, Bernd and Digel, Ilya and Artmann, Gerhard and Eliseev, D. and Heinen, D. and Scholz, F. and Wiebusch, C. and Macht, S. and Bestmann, U. and Reineking, T. and Zetzsche, C. and Schill, K. and F{\"o}rstner, R. and Niedermeier, H. and Szumski, A. and Eissfeller, B. and Naumann, U. and Helbing, K.},
  title     = {Navigation technology for exploration of glacier ice with maneuverable melting probes},
  series = {Cold Regions Science and Technology},
  journal   = {Cold Regions Science and Technology},
  number    = {123},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0165-232X},
  doi       = {10.1016/j.coldregions.2015.11.006},
  pages     = {53 -- 70},
  year      = {2016},
  abstract  = {The Saturnian moon Enceladus with its extensive water bodies underneath a thick ice sheet cover is a potential candidate for extraterrestrial life. Direct exploration of such extraterrestrial aquatic ecosystems requires advanced access and sampling technologies with a high level of autonomy. A new technological approach has been developed as part of the collaborative research project Enceladus Explorer (EnEx). The concept is based upon a minimally invasive melting probe called the IceMole. The force-regulated, heater-controlled IceMole is able to travel along a curved trajectory as well as upwards. Hence, it allows maneuvers which may be necessary for obstacle avoidance or target selection. Maneuverability, however, necessitates a sophisticated on-board navigation system capable of autonomous operations. The development of such a navigational system has been the focal part of the EnEx project. The original IceMole has been further developed to include relative positioning based on in-ice attitude determination, acoustic positioning, ultrasonic obstacle and target detection integrated through a high-level sensor fusion. This paper describes the EnEx technology and discusses implications for an actual extraterrestrial mission concept.},
  language  = {en}
}
@article{SadykovDigelTemizArtmannetal.2009,
  author    = {Sadykov, Rustam and Digel, Ilya and Temiz Artmann, Ayseg{\"u}l and Porst, Dariusz and Linder, Peter and Kayser, Peter and Artmann, Gerhard and Savitskaya, Irina and Zhubanova, Azhar},
  title     = {Oral lead exposure induces dysbacteriosis in rats},
  series = {Journal of Occupational Health. 51 (2009) (2009), H. 1},
  journal   = {Journal of Occupational Health. 51 (2009) (2009), H. 1},
  isbn      = {1348-9585},
  pages     = {64 -- 73},
  year      = {2009},
  language  = {en}
}
@inproceedings{FrotscherDuongStaat2015,
  author    = {Frotscher, Ralf and Duong, Minh Tuan and Staat, Manfred},
  title     = {Simulating beating cardiomyocytes with electromechanical coupling},
  series = {II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)},
  booktitle = {II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)},
  organization    = {International Conference on Biomedical Technology <2, 2015, Hannover>},
  pages     = {1 -- 2},
  year      = {2015},
  language  = {en}
}
@incollection{TranStaat2014,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {Shakedown analysis of Reissner-Mindlin plates using the edge-based smoothed finite element method},
  series = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  booktitle = {Direct methods for limit states in structures and materials / Dieter Weichert ; Alan Ponter, ed.},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {978-94-007-6826-0 (Print) 978-94-007-6827-7 (Online)},
  doi       = {10.1007/978-94-007-6827-7_5},
  pages     = {101 -- 117},
  year      = {2014},
  abstract  = {This paper concerns the development of a primal-dual algorithm for limit and shakedown analysis of Reissner-Mindlin plates made of von Mises material. At each optimization iteration, the lower bound of the shakedown load multiplier is calculated simultaneously with the upper bound using the duality theory. An edge-based smoothed finite element method (ES-FEM) combined with the discrete shear gap (DSG) technique is used to improve the accuracy of the solutions and to avoid the transverse shear locking behaviour. The method not only possesses all inherent features of convergence and accuracy from ES-FEM, but also ensures that the total number of variables in the optimization problem is kept to a minimum compared with the standard finite element formulation. Numerical examples are presented to demonstrate the effectiveness of the present method.},
  language  = {en}
}
@article{TrzewikTemizArtmannLinderetal.2004,
  author    = {Trzewik, J{\"u}rgen and Temiz Artmann, Ayseg{\"u}l and Linder, Peter and Demirci, T. and Digel, Ilya and Artmann, Gerhard},
  title     = {Evaluation of lateral mechanical tension in thin-film tissue constructs},
  series = {Annals of Biomedical Engineering. 32 (2004), H. 9},
  journal   = {Annals of Biomedical Engineering. 32 (2004), H. 9},
  isbn      = {1573-9686},
  pages     = {1243 -- 1251},
  year      = {2004},
  language  = {en}
}
@article{BhattaraiJabbariAndingetal.2018,
  author    = {Bhattarai, Aroj and Jabbari, Medisa and Anding, Ralf and Staat, Manfred},
  title     = {Surgical treatment of vaginal vault prolapse using different prosthetic mesh implants: a finite element analysis},
  series = {tm - Technisches Messen},
  volume    = {85},
  journal   = {tm - Technisches Messen},
  number    = {5},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2196-7113},
  doi       = {10.1515/teme-2017-0115},
  pages     = {331 -- 342},
  year      = {2018},
  abstract  = {Particularly multiparous elderly women may suffer from vaginal vault prolapse after hysterectomy due to weak support from lax apical ligaments. A decreased amount of estrogen and progesterone in older age is assumed to remodel the collagen thereby reducing tissue stiffness. Sacrocolpopexy is either performed as open or laparoscopic surgery using prosthetic mesh implants to substitute lax ligaments. Y-shaped mesh models (DynaMesh, Gynemesh, and Ultrapro) are implanted in a 3D female pelvic floor finite element model in the extraperitoneal space from the vaginal cuff to the first sacral (S1) bone below promontory. Numerical simulations are conducted during Valsalva maneuver with weakened tissues modeled by reduced tissue stiffness. Tissues are modeled as incompressible, isotropic hyperelastic materials whereas the meshes are modeled either as orthotropic linear elastic or as isotropic hyperlastic materials. The positions of the vaginal cuff and the bladder base are calculated from the pubococcygeal line for female pelvic floor at rest, for prolapse and after repair using the three meshes. Due to mesh mechanics and mesh pore deformation along the loaded direction, the DynaMesh with regular rectangular mesh pores is found to provide better mechanical support to the organs than the Gynemesh and the Ultrapro with irregular hexagonal mesh pores. Insbesondere {\"a}ltere, mehrgeb{\"a}hrende Frauen leiden h{\"a}ufiger an einem Scheidenvorfall nach einer Hysterektomie aufgrund der schwachen Unterst{\"u}tzung durch laxe apikale B{\"a}nder. Es wird angenommen, dass eine verringerte Menge an {\"O}strogen und Progesteron im h{\"o}heren Alter das Kollagen umformt, wodurch die Gewebesteifigkeit reduziert wird. Die Sakrokolpopexie ist eine offene oder laparoskopische Operation, die mit prothetischen Netzimplantaten durchgef{\"u}hrt wird, um laxe B{\"a}nder zu ersetzen. Y-f{\"o}rmige Netzmodelle (DynaMesh, Gynemesh und Ultrapro) werden in einem 3D-Modell des weiblichen Beckenbodens im extraperitonealen Raum vom Vaginalstumpf bis zum Promontorium implantiert. Numerische Simulationen werden w{\"a}hrend des Valsalva-Man{\"o}vers mit geschw{\"a}chtem Gewebe durchgef{\"u}hrt, das durch eine reduzierte Gewebesteifigkeit modelliert wird. Die Gewebe werden als inkompressible, isotrop hyperelastische Materialien modelliert, w{\"a}hrend die Netze entweder als orthotrope linear elastische oder als isotrope hyperlastische Materialien modelliert werden. Die Positionen des Vaginalstumpfs, der Blase und der Harnr{\"o}hrenachse werden anhand der Pubococcygeallinie aus der Ruhelage, f{\"u}r den Prolaps und nach der Reparatur unter Verwendung der drei Netze berechnet. Aufgrund der Netzmechanik und der Netzporenverformung bietet das DynaMesh mit regelm{\"a}ßigen rechteckigen Netzporen eine bessere mechanische Unterst{\"u}tzung und eine Neupositionierung des Scheidengew{\"o}lbes, der Blase und der Urethraachse als Gynemesh und Ultrapro mit unregelm{\"a}ßigen hexagonalen Netzporen.},
  language  = {en}
}
@article{BirgelLeschingerWegmannetal.2018,
  author    = {Birgel, Stefan and Leschinger, Tim and Wegmann, Kilian and Staat, Manfred},
  title     = {Calculation of muscle forces and joint reaction loads in the shoulder area via an OpenSim based computer model},
  series = {tm - Technisches Messen},
  volume    = {85},
  journal   = {tm - Technisches Messen},
  number    = {5},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {2196-7113},
  doi       = {10.1515/teme-2017-0114},
  pages     = {321 -- 330},
  year      = {2018},
  abstract  = {Using the OpenSim software and verified anatomical data, a computer model for the calculation of biomechanical parameters is developed and used to determine the effect of a reattachment of the Supraspinatus muscle with a medial displacement of the muscle attachment point, which may be necessary for a rupture of the supraspinatus tendon. The results include the influence of the operation on basic biomechanical parameters such as the lever arm, as well as the calculated the muscle activations for the supraspinatus and deltoid. In addition, the influence on joint stability is examined by an analysis of the joint reaction force. The study provides a detailed description of the used model, as well as medical findings to a reattachment of the supraspinatus. Mit der Software OpenSim und {\"u}berpr{\"u}ften anatomischen Daten wird ein Computermodell zur Berechnung von biomechanischen Parametern entwickelt und genutzt, um den Effekt einer Refixierung des Supraspinatusmuskels mit einer medialen Verschiebung des Muskelansatzpunktes zu ermitteln, wie sie unter anderem nach einem Riss der Supraspinatussehne notwendig sein kann. Die Ergebnisse umfassen hierbei den Einfluss der Operation auf grundlegende biomechanische Parameter wie den Hebelarm sowie die berechneten Muskelaktivierungen f{\"u}r den Supraspinatus und Deltoideus. Zus{\"a}tzlich wird der Einfluss auf die Gelenkstabilit{\"a}t betrachtet und durch eine Analyse der Gelenkreaktionskraft untersucht. Die Studie bietet eine detaillierte Beschreibung des genutzten Modells, sowie medizinische Erkenntnisse zu einer Refixierung des Supraspinatus.},
  language  = {en}
}