@article{Staat2005,
  author    = {Staat, Manfred},
  title     = {Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels},
  year      = {2005},
  abstract  = {Limit loads can be calculated with the finite element method (FEM) for any component, defect geometry, and loading. FEM suggests that published long crack limit formulae for axial defects under-estimate the burst pressure for internal surface defects in thick pipes while limit loads are not conservative for deep cracks and for pressure loaded crack-faces. Very deep cracks have a residual strength, which is modelled by a global collapse load. These observations are combined to derive new analytical local and global collapse loads. The global collapse loads are close to FEM limit analyses for all crack dimensions.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{Staat2005,
  author    = {Staat, Manfred},
  title     = {Direct finite element route for design-by-analysis of pressure components},
  year      = {2005},
  abstract  = {In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{Staat2003,
  author    = {Staat, Manfred},
  title     = {Shakedown and ratchetting under tension-torsion loadings: analysis and experiments},
  year      = {2003},
  abstract  = {Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been carried out in order to calibrate a bounded kinematic hardening rule. The load parameters have been selected on the basis of previous shakedown analyses with the PERMAS code using a kinematic hardening material model. It is shown that this shakedown analysis gives reasonable agreement between the experimental and the numerical results. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{Staat2000,
  author    = {Staat, Manfred},
  title     = {Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material},
  year      = {2000},
  abstract  = {Limit and shakedown analysis are effective methods for assessing the load carrying capacity of a given structure. The elasto-plastic behavior of the structure subjected to loads varying in a given load domain is characterized by the shakedown load factor, defined as the maximum factor which satisfies the sufficient conditions stated in the corresponding static shakedown theorem. The finite element dicretization of the problem may lead to very large convex optimization. For the effective solution a basis reduction method has been developed that makes use of the special problem structure for perfectly plastic material. The paper proposes a modified basis reduction method for direct application to the two-surface plasticity model of bounded kinematic hardening material. The considered numerical examples show an enlargement of the load carrying capacity due to bounded hardening.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{Staat2001,
  author    = {Staat, Manfred},
  title     = {LISA - a European project for FEM-based limit and shakedown analysis},
  year      = {2001},
  abstract  = {The load-carrying capacity or the safety against plastic limit states are the central questions in the design of structures and passive components in the apparatus engineering. A precise answer is most simply given by limit and shakedown analysis. These methods can be based on static and kinematic theorems for lower and upper bound analysis. Both may be formulated as optimization problems for finite element discretizations of structures. The problems of large-scale analysis and the extension towards realistic material modelling will be solved in a European research project. Limit and shakedown analyses are briefly demonstrated with illustrative examples.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{Gebhardt2004,
  author    = {Gebhardt, Andreas},
  title     = {Rapid Prototyping},
  series = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  journal   = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...},
  publisher = {Heidelberg},
  address   = {Springer},
  isbn      = {3-540-00105-0},
  pages     = {105 -- 123},
  year      = {2004},
  language  = {en}
}
@article{JacobsHermanns1996,
  author    = {Jacobs, Stephan and Hermanns, Oliver},
  title     = {Cooperative Design: Requirements on Network Technology and Document Architecture},
  series = {Selected papers of the 6th Joint European Networking Conference / guest ed.: J. Barber{\´a}},
  journal   = {Selected papers of the 6th Joint European Networking Conference / guest ed.: J. Barber{\´a}},
  publisher = {Elsevier},
  address   = {Amsterdam [u.a.]},
  pages     = {S. 428 - 600 : Ill., graph. Darst.},
  year      = {1996},
  language  = {en}
}
@article{JacobsJarkePohl1994,
  author    = {Jacobs, Stephan and Jarke, Matthias and Pohl, Klaus},
  title     = {Requirements Engineering 1993},
  series = {Automated software engineering : the international journal of automated reasoning and artificial intelligence in software engineering. Vol. 1 (1994), H. No. 1},
  journal   = {Automated software engineering : the international journal of automated reasoning and artificial intelligence in software engineering. Vol. 1 (1994), H. No. 1},
  isbn      = {0928-8910},
  year      = {1994},
  language  = {en}
}
@article{JacobsGrobKethers1994,
  author    = {Jacobs, Stephan and Grob, Robert and Kethers, Stefanie},
  title     = {Towards CIS in Quality Management - Integration of Agents and Methods / Robert Grob, Stephan Jacobs, Stefanie Kethers},
  series = {Proceedings of the Second International Conference on Cooperative Information Systems : May 17 - 20, 1994, Toronto, Canada / sponsored by the University of Toronto. Editors: Michael Brodie},
  journal   = {Proceedings of the Second International Conference on Cooperative Information Systems : May 17 - 20, 1994, Toronto, Canada / sponsored by the University of Toronto. Editors: Michael Brodie},
  publisher = {University of Toronto Press},
  address   = {Toronto},
  year      = {1994},
  language  = {en}
}
@article{Jacobs1994,
  author    = {Jacobs, Stephan},
  title     = {A Fault Diagnosis System Using Temporary Relations between Symptoms},
  series = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  journal   = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)},
  publisher = {Physica-Verl.},
  address   = {Heidelberg},
  isbn      = {379080794X},
  pages     = {XXVI, 550 S : graph. Darst.},
  year      = {1994},
  language  = {en}
}
@article{JacobsJarkePohletal.1993,
  author    = {Jacobs, Stephan and Jarke, Matthias and Pohl, Klaus and Bubenko, Janis},
  title     = {Requirements Engineering : An Integrated View of Representations, Process, and Domain / Jarke, Matthias ; Pohl, Klaus ; Jacobs, Stephan ; Bubenko, Janis ...},
  series = {Software engineering : 4th European Software Engineering Conference Garmisch-Partenkirchen, Germany, September 13 - 17, 1993 ; proceedings / ESEC '93. Ian Sommerville ... (eds.)},
  journal   = {Software engineering : 4th European Software Engineering Conference Garmisch-Partenkirchen, Germany, September 13 - 17, 1993 ; proceedings / ESEC '93. Ian Sommerville ... (eds.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-57209-0},
  pages     = {100 -- 114},
  year      = {1993},
  language  = {en}
}
@article{JacobsQuernheimAghadavoodiJolfaei1991,
  author    = {Jacobs, Stephan and Quernheim, Ulrich and Aghadavoodi Jolfaei, Masoud},
  title     = {Performance Evalutation of three Access Protocols for VSAT Networks / Ulrich Quernheim, Stephan Jacobs, Masoud Aghadavoodi Jolfaei},
  series = {Proceedings of the second European Conference on Satellite Communications : ECSC-2 ; Palais de Congr{\`e}s, Li{\`e}ge, Belgium, 22 - 24 October 1991 / [ed.: Brigitte Kaldeich]},
  journal   = {Proceedings of the second European Conference on Satellite Communications : ECSC-2 ; Palais de Congr{\`e}s, Li{\`e}ge, Belgium, 22 - 24 October 1991 / [ed.: Brigitte Kaldeich]},
  publisher = {ESA Publ. Div.},
  address   = {Noordwijk},
  isbn      = {92-9092-170-6},
  pages     = {XXXII, 533 S. : Ill., graph. Darst.},
  year      = {1991},
  language  = {en}
}
@article{JacobsQuernheim1990,
  author    = {Jacobs, Stephan and Quernheim, Ulrich},
  title     = {ARQ Error Control for Multipoint Satellite Communications / Ulrich Quernheim, Stephan Jacobs},
  series = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay},
  journal   = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay},
  publisher = {Elsevier},
  address   = {New York, N.Y.},
  isbn      = {0444888721},
  pages     = {xi, 505 p : ill},
  year      = {1990},
  language  = {en}
}
@article{Grap2003,
  author    = {Grap, Rolf Dietmar},
  title     = {Determining manpower requirements in a spinning mill},
  series = {Chemical fibers international : CFI ; fiber polymers, fibers, texturing, and spunbonds (2003)},
  journal   = {Chemical fibers international : CFI ; fiber polymers, fibers, texturing, and spunbonds (2003)},
  isbn      = {0340-3343},
  pages     = {455 -- 458},
  year      = {2003},
  language  = {en}
}
@article{Jacobs1999,
  author    = {Jacobs, Stephan},
  title     = {Introducing Measurable Requirements: A Case Study},
  series = {Proceedings : June 7 - 11, 1999, University of Limerick, Limerick, Ireland / sponsored by IEEE Computer Society Technical Council on Software Engineering. In cooperation with ACM SIGSOFT},
  journal   = {Proceedings : June 7 - 11, 1999, University of Limerick, Limerick, Ireland / sponsored by IEEE Computer Society Technical Council on Software Engineering. In cooperation with ACM SIGSOFT},
  isbn      = {0769501885},
  year      = {1999},
  language  = {en}
}
@article{GebhardtJarkeJacobs1997,
  author    = {Gebhardt, Michael and Jarke, Matthias and Jacobs, Stephan},
  title     = {A Toolkit for Negotiation Support Interfaces to Multidimensional Data},
  series = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman},
  journal   = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman},
  publisher = {ACM Press},
  address   = {New York, NY},
  isbn      = {0897919114},
  pages     = {XIV, 586 S : Ill., graph. Darst.},
  year      = {1997},
  language  = {en}
}
@article{JacobsGebhardt1996,
  author    = {Jacobs, Stephan and Gebhardt, Michael},
  title     = {Conflict Management in Design /},
  series = {Transactions from the Eighth Symposium on Quality Function Deployment : (concurrent with International Symposium on QFD 96] ; June 9 - 11, 1996, Novi, Michigan, USA / sponsored by: QFD Institute},
  journal   = {Transactions from the Eighth Symposium on Quality Function Deployment : (concurrent with International Symposium on QFD 96] ; June 9 - 11, 1996, Novi, Michigan, USA / sponsored by: QFD Institute},
  publisher = {QFD Institute},
  address   = {Ann Arbor, Mich.},
  pages     = {599 S.},
  year      = {1996},
  language  = {en}
}
@article{JacobsGebhardtKethersetal.1996,
  author    = {Jacobs, Stephan and Gebhardt, Michael and Kethers, Stefanie and Rzasa, Wojtek},
  title     = {Filling HTML forms simultaneously: CoWeb — architecture and functionality},
  series = {Computer Networks and ISDN Systems. Vol. 30 (1996), H. Issues 1-7},
  journal   = {Computer Networks and ISDN Systems. Vol. 30 (1996), H. Issues 1-7},
  isbn      = {0376-5075},
  pages     = {1385 -- 1395},
  year      = {1996},
  language  = {en}
}
@article{JacobsHolten1995,
  author    = {Jacobs, Stephan and Holten, Roland},
  title     = {Goal Driven Business Modelling - Supporting Decision Making within Information System Development},
  series = {Conference on Organizational Computing Systems : August 13 - 16, 1995, Milpitas, Calif. / general ed. Nora Comstock ...},
  journal   = {Conference on Organizational Computing Systems : August 13 - 16, 1995, Milpitas, Calif. / general ed. Nora Comstock ...},
  publisher = {ACM},
  address   = {New York, NY},
  isbn      = {0-89791-706-5},
  pages     = {III, 353 S. : graph. Darst.},
  year      = {1995},
  language  = {en}
}
@article{HagemannCassidy1994,
  author    = {Hagemann, Hans-J{\"u}rgen and Cassidy, Wiliam D.},
  title     = {Diamond growth rates and quality: dependence on gas phase cpmposition / William D. Cassidy [...], Hans-Jurgen Hagemann},
  series = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ....},
  journal   = {Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ....},
  address   = {Pittsburgh, Penn. ,},
  isbn      = {1-55899-239-1},
  pages     = {285 -- 291},
  year      = {1994},
  language  = {en}
}