@inproceedings{ZiolkoSchmitzSattleretal.2010,
  author    = {Ziolko, C. and Schmitz, M. and Sattler, Johannes Christoph and Khedim, Ahmed and Hoffschmidt, Bernhard},
  title     = {AlSol - the open volumetric receiver technology moves to Africa},
  series = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  booktitle = {SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France},
  publisher = {Soc. OSC},
  address   = {Saint Maur},
  pages     = {93 -- 94},
  year      = {2010},
  language  = {en}
}
@inproceedings{AlexopoulosRauHoffschmidtetal.2012,
  author    = {Alexopoulos, Spiros and Rau, Christoph and Hoffschmidt, Bernhard and Breitbach, Gerd and Latzke, Markus},
  title     = {Modelling and validation of a transient heat recovery steam generator of the solar tower power plant Juelich},
  series = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  booktitle = {Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012},
  address   = {Rijeka},
  pages     = {ID 97},
  year      = {2012},
  language  = {en}
}
@inproceedings{BungSunMeirelesetal.2012,
  author    = {Bung, Daniel Bernhard and Sun, Q. and Meireles, I. and Matos, J. and Viseu, T.},
  title     = {USBR type III stilling basin performance for steep stepped spillways},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@inproceedings{KerpenBungSchlurmann2010,
  author    = {Kerpen, N. B. and Bung, Daniel Bernhard and Schlurmann, Torsten},
  title     = {Physical model investigations of pressure distributions next to ships passing through a lock},
  series = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  booktitle = {5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010},
  publisher = {Univ. Press},
  address   = {Tianjin},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <5, 2010, Tianjin>},
  isbn      = {978-7-5618-3671-2},
  pages     = {514 -- 519},
  year      = {2010},
  language  = {en}
}
@inproceedings{GogolinCarvalhoBungetal.2013,
  author    = {Gogolin, C. and Carvalho, R. and Bung, Daniel Bernhard and Matos, J.},
  title     = {Experimental and numerical investigation of steady and unsteady flows in roughened channels with cross beams},
  series = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A10837C},
  year      = {2013},
  language  = {en}
}
@inproceedings{OertelBung2012,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Characteristics of cross-bar block ramp flows},
  series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto},
  organization    = {International Symposium on Hydraulic Structures <4, 2012, Porto>},
  isbn      = {978-989-8509-01-7},
  pages     = {Elektronisch publiziert},
  year      = {2012},
  language  = {en}
}
@inproceedings{SchlurmannBung2012,
  author    = {Schlurmann, Torsten and Bung, Daniel Bernhard},
  title     = {Experimental investigation of flow-induced radial gate vibrations at Lower Subansiri dam},
  series = {Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung},
  booktitle = {Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung},
  organization    = {Chinese-German Joint Symposium on Hydraulic and Ocean Engineering <6, 2012, Keelung>},
  pages     = {7 -- 14},
  year      = {2012},
  language  = {en}
}
@inproceedings{OertelBung2013,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Comparison of 2D dam-break waves with VOF and SPH method},
  series = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11113},
  year      = {2013},
  language  = {en}
}
@inproceedings{Bung2013,
  author    = {Bung, Daniel Bernhard},
  title     = {Air-water surface roughness in self-aerated stepped spillway flows},
  series = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11045},
  year      = {2013},
  language  = {en}
}
@incollection{DuongSeifarthTemizArtmannetal.2018,
  author    = {Duong, Minh Tuan and Seifarth, Volker and Temiz Artmann, Ayseg{\"u}l and Artmann, Gerhard and Staat, Manfred},
  title     = {Growth Modelling Promoting Mechanical Stimulation of Smooth Muscle Cells of Porcine Tubular Organs in a Fibrin-PVDF Scaffold},
  series = {Biological, Physical and Technical Basics of Cell Engineering},
  booktitle = {Biological, Physical and Technical Basics of Cell Engineering},
  editor    = {Artmann, Gerhard and Temiz Artmann, Ayseg{\"u}l and Zhubanova, Azhar A. and Digel, Ilya},
  publisher = {Springer},
  address   = {Singapore},
  isbn      = {978-981-10-7904-7},
  doi       = {10.1007/978-981-10-7904-7_9},
  pages     = {209 -- 232},
  year      = {2018},
  abstract  = {Reconstructive surgery and tissue replacements like ureters or bladders reconstruction have been recently studied, taking into account growth and remodelling of cells since living cells are capable of growing, adapting, remodelling or degrading and restoring in order to deform and respond to stimuli. Hence, shapes of ureters or bladders and their microstructure change during growth and these changes strongly depend on external stimuli such as training. We present the mechanical stimulation of smooth muscle cells in a tubular fibrin-PVDFA scaffold and the modelling of the growth of tissue by stimuli. To this end, mechanotransduction was performed with a kyphoplasty balloon catheter that was guided through the lumen of the tubular structure. The bursting pressure was examined to compare the stability of the incubated tissue constructs. The results showed the significant changes on tissues with training by increasing the burst pressure as a characteristic mechanical property and the smooth muscle cells were more oriented with uniformly higher density. Besides, the computational growth models also exhibited the accurate tendencies of growth of the cells under different external stimuli. Such models may lead to design standards for the better layered tissue structure in reconstructing of tubular organs characterized as composite materials such as intestines, ureters and arteries.},
  language  = {en}
}
@article{KochPoghossianSchoeningetal.2018,
  author    = {Koch, Claudia and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Wege, Christian},
  title     = {Penicillin Detection by Tobacco Mosaic Virus-Assisted Colorimetric Biosensors},
  series = {Nanotheranostics},
  volume    = {2},
  journal   = {Nanotheranostics},
  number    = {2},
  publisher = {Ivyspring},
  address   = {Sydney},
  issn      = {2206-7418},
  doi       = {10.7150/ntno.22114},
  pages     = {184 -- 196},
  year      = {2018},
  abstract  = {The presentation of enzymes on viral scaffolds has beneficial effects such as an increased enzyme loading and a prolonged reusability in comparison to conventional immobilization platforms. Here, we used modified tobacco mosaic virus (TMV) nanorods as enzyme carriers in penicillin G detection for the first time. Penicillinase enzymes were conjugated with streptavidin and coupled to TMV rods by use of a bifunctional biotin-linker. Penicillinase-decorated TMV particles were characterized extensively in halochromic dye-based biosensing. Acidometric analyte detection was performed with bromcresol purple as pH indicator and spectrophotometry. The TMV-assisted sensors exhibited increased enzyme loading and strongly improved reusability, and higher analysis rates compared to layouts without viral adapters. They extended the half-life of the sensors from 4 - 6 days to 5 weeks and thus allowed an at least 8-fold longer use of the sensors. Using a commercial budget-priced penicillinase preparation, a detection limit of 100 µM penicillin was obtained. Initial experiments also indicate that the system may be transferred to label-free detection layouts.},
  language  = {en}
}
@article{HarzheimMuehmelHeuermann2021,
  author    = {Harzheim, Thomas and M{\"u}hmel, Marc and Heuermann, Holger},
  title     = {A SFCW harmonic radar system for maritime search and rescue using passive and active tags},
  series = {International Journal of Microwave and Wireless Technologies},
  volume    = {13},
  journal   = {International Journal of Microwave and Wireless Technologies},
  number    = {Special Issue 7},
  publisher = {Cambridge University Press},
  address   = {Cambridge},
  doi       = {10.1017/S1759078721000520},
  pages     = {691 -- 707},
  year      = {2021},
  abstract  = {This paper introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested while attached to life jackets and a small boat. In this demonstration test carried out on the Baltic Sea, the system was able to detect and range the active tags up to a distance of 5800 m using an illumination signal transmit-power of 100 W. Special attention is given to the development, performance, and conceptual differences between passive and active tags used in the system. Guidelines for achieving a high HR dynamic range, including a system components description, are given and a comparison with other HR systems is performed. System integration with a commercial maritime X-band navigation radar is shown to demonstrate a solution for rapid search and rescue response and quick localization.},
  language  = {en}
}
@article{PoghossianThustSchoeningetal.2000,
  author    = {Poghossian, Arshak and Thust, M. and Sch{\"o}ning, Michael Josef and M{\"u}ller-Veggian, Mattea and Kordos, P. and L{\"u}th, H.},
  title     = {Cross-sensitivity of a capacitive penicillin sensor combined with a diffusion barrier},
  series = {Sensors and Actuators B. 68 (2000), H. 1-3},
  journal   = {Sensors and Actuators B. 68 (2000), H. 1-3},
  isbn      = {0925-4005},
  pages     = {260 -- 265},
  year      = {2000},
  language  = {en}
}
@article{SchoeningBrinkmannDemuthetal.2004,
  author    = {Sch{\"o}ning, Michael Josef and Brinkmann, D. and Demuth, C. and Poghossian, Arshak},
  title     = {CIP (cleaning-in-place)-suitable „non-glass" pH sensor based on a Ta2O5-gate EIS structure},
  series = {Digest of technical papers : September 12 - 15, 2004, Rome, Italy, Pontificia Universitas Sancto Thoma Aquinate in Urbe / [conference chairperson: C. Di Natale].},
  journal   = {Digest of technical papers : September 12 - 15, 2004, Rome, Italy, Pontificia Universitas Sancto Thoma Aquinate in Urbe / [conference chairperson: C. Di Natale].},
  address   = {Roma},
  isbn      = {88-7621-282-5},
  pages     = {857 -- 860},
  year      = {2004},
  language  = {en}
}
@article{PoghossianBerndsenLuethetal.2001,
  author    = {Poghossian, Arshak and Berndsen, Lars and L{\"u}th, Hans and Sch{\"o}ning, Michael Josef},
  title     = {Novel concepts for flow-rate and flow-direction determination by means of pH-sensitive ISFETs},
  series = {Proceedings of SPIE. 4560 (2001)},
  journal   = {Proceedings of SPIE. 4560 (2001)},
  pages     = {19 -- 27},
  year      = {2001},
  language  = {en}
}
@article{Staat1993,
  author    = {Staat, Manfred},
  title     = {Sensitivity of and Influences on the Reliability of an HTR-Module Primary Circuit Pressure Boundary},
  series = {Transactions of the 12th International Conference on Structural Mechanics in Reactor Technology (SMiRT-12) / Kussmaul, K. [ed]},
  journal   = {Transactions of the 12th International Conference on Structural Mechanics in Reactor Technology (SMiRT-12) / Kussmaul, K. [ed]},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0-444-81515-5},
  pages     = {147 -- 152},
  year      = {1993},
  language  = {en}
}
@inproceedings{BeckerEggertBruningetal.2013,
  author    = {Becker, J{\"o}rg and Eggert, Mathias and Bruning, Dennis and Saat, Jan},
  title     = {Applicability of Business Process Model Analysis Approaches - A Case Study in Financial Services Consulting},
  series = {Wirtschaftsinformatik Proceedings 2013},
  booktitle = {Wirtschaftsinformatik Proceedings 2013},
  pages     = {1181 -- 1195},
  year      = {2013},
  language  = {en}
}
@article{Stulpe2020,
  author    = {Stulpe, Werner},
  title     = {Pairwise coexistence of effects versus coexistence},
  series = {Journal of Physics: Conference Series},
  volume    = {1638},
  journal   = {Journal of Physics: Conference Series},
  number    = {012004},
  publisher = {IOP},
  address   = {Bristol},
  issn      = {1742-6596},
  doi       = {10.1088/1742-6596/1638/1/012004},
  pages     = {1 -- 21},
  year      = {2020},
  language  = {en}
}
@incollection{DuongNguyenStaat2017,
  author    = {Duong, Minh Tuan and Nguyen, Nhu Huynh and Staat, Manfred},
  title     = {Physical response of hyperelastic models for composite materials and soft tissues},
  series = {Advances in Composite Material},
  booktitle = {Advances in Composite Material},
  publisher = {Scientific Research Publishing},
  address   = {Wuhan},
  isbn      = {978-1-61896-300-0 (Hardcover), 978-1-61896-299-7 (Paperback)},
  pages     = {316},
  year      = {2017},
  language  = {en}
}
@inproceedings{SattlerChicoCaminosUerlingsetal.2020,
  author    = {Sattler, Johannes Christoph and Chico Caminos, Ricardo Alexander and {\"U}rlings, Nicolas and Dutta, Siddharth and Ruiz, Victor and Kalogirou, Soteris and Ktistis, Panayiotis and Agathokleous, Rafaela and Jung, Christian and Alexopoulos, Spiros and Atti, Vikrama Nagababu and Teixeira Boura, Cristiano Jos{\´e} and Herrmann, Ulf},
  title     = {Operational experience and behaviour of a parabolic trough collector system with concrete thermal energy storage for process steam generation in Cyprus},
  series = {AIP Conference Proceedings},
  booktitle = {AIP Conference Proceedings},
  number    = {2303},
  doi       = {10.1063/5.0029278},
  pages     = {140004-1 -- 140004-10},
  year      = {2020},
  abstract  = {As part of the transnational research project EDITOR, a parabolic trough collector system (PTC) with concrete thermal energy storage (C-TES) was installed and commissioned in Limassol, Cyprus. The system is located on the premises of the beverage manufacturer KEAN Soft Drinks Ltd. and its function is to supply process steam for the factory's pasteurisation process [1]. Depending on the factory's seasonally varying capacity for beverage production, the solar system delivers between 5 and 25 \% of the total steam demand. In combination with the C-TES, the solar plant can supply process steam on demand before sunrise or after sunset. Furthermore, the C-TES compensates the PTC during the day in fluctuating weather conditions. The parabolic trough collector as well as the control and oil handling unit is designed and manufactured by Protarget AG, Germany. The C-TES is designed and produced by CADE Soluciones de Ingenier{\´i}a, S.L., Spain. In the focus of this paper is the description of the operational experience with the PTC, C-TES and boiler during the commissioning and operation phase. Additionally, innovative optimisation measures are presented.},
  language  = {en}
}