@inproceedings{KreutzLoergenGraeweetal.2006, author = {Kreutz, Christian and L{\"o}rgen, J{\"u}rgen and Graewe, Boris and Bargon, Joachim and Yoshida, Mayumi and Freso, Zachary M. and Fr{\`e}chet, Jean M. J.}, title = {High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1445}, year = {2006}, abstract = {An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).}, subject = {Biosensor}, language = {en} } @inproceedings{RabnerShacham2006, author = {Rabner, Arthur and Shacham, Yosi}, title = {A concept for a sensitive micro total analysis system for high throughput fluorescence imaging}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1456}, year = {2006}, abstract = {This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.}, subject = {Biosensor}, language = {en} } @inproceedings{FoersterStockMontanarietal.2006, author = {F{\"o}rster, Arnold and Stock, J{\"u}rgen and Montanari, Simone and Lepsa, Mihail Ion and L{\"u}th, Hans}, title = {Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1462}, year = {2006}, abstract = {GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.}, subject = {Biosensor}, language = {en} } @inproceedings{PijanowskaRemiszewskaPederzollietal.2006, author = {Pijanowska, Dorota G. and Remiszewska, Elzbieta and Pederzolli, Cecilia and Lunelli, Lorenzo and Vendano, Michele and Canteri, Roberto and Dudzinski, Konrad and Kruk, Jerzy and Torbicz, Wladyslaw}, title = {Surface modification for microreactor fabrication}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1480}, year = {2006}, abstract = {In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff's base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.}, subject = {Biosensor}, language = {en} } @inproceedings{BukhariYang2006, author = {Bukhari, Syed Faisal Ahmed and Yang, Wuqiang}, title = {Multi-interface level sensors and new development in monitoring and control of oil separators}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1498}, year = {2006}, abstract = {In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.}, subject = {Biosensor}, language = {en} } @inproceedings{TymeckiGlabKoncki2006, author = {Tymecki, Lukasz and Glab, Stanislaw and Koncki, Robert}, title = {Miniaturized, planar ion-selective electrodes fabricated by means of thick-film technology}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1506}, year = {2006}, abstract = {Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.}, subject = {Biosensor}, language = {en} } @inproceedings{Bruessermann2005, author = {Br{\"u}ssermann, Klaus}, title = {Platform of Excellence in "Energy and Environment"}, year = {2005}, abstract = {The Ministry of Science and Research in North Rhine-Westphalia created eight platforms of excellence, one in the research area „Energy and Environment" in 2002 at ACUAS. This platform concentrates the research and development of 13 professors in J{\"u}lich and Aachen and of two scientific institutes with different topics: - NOWUM-Energy with emphasis on efficient and economic energy conversion - The Solar Institute J{\"u}lich - SIJ - being the largest research institute in the field of renewables at a University of Applied Sciences in Germany With this platform each possible energy conversion - nuclear, fossil, renewable- can be dealt with to help solving the two most important problems of mankind, energy and potable water. At the CSE are presented the historical development, some research results and the combined master studies in „Energy Systems" and „Nuclear Applications"}, subject = {Energietechnik}, language = {en} } @book{Schuermann1983, author = {Sch{\"u}rmann, Wilhelm}, title = {Song of joy : Kippenberger, Sch{\"u}rmann [Martin Kippenberger - gemalte Bilder ; Wilhelm Sch{\"u}rmann - fotografierte Bilder]}, publisher = {Neue Galerie}, address = {Aachen}, pages = {20 S. : {\"u}berw. Ill.}, year = {1983}, language = {en} } @article{Gebhardt2004, author = {Gebhardt, Andreas}, title = {Rapid Prototyping}, series = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...}, journal = {Landolt-B{\"o}rnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C Laser Applications / authors: B{\"a}uerle, D. ...}, publisher = {Heidelberg}, address = {Springer}, isbn = {3-540-00105-0}, pages = {105 -- 123}, year = {2004}, language = {en} } @article{JacobsHermanns1996, author = {Jacobs, Stephan and Hermanns, Oliver}, title = {Cooperative Design: Requirements on Network Technology and Document Architecture}, series = {Selected papers of the 6th Joint European Networking Conference / guest ed.: J. Barber{\´a}}, journal = {Selected papers of the 6th Joint European Networking Conference / guest ed.: J. Barber{\´a}}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, pages = {S. 428 - 600 : Ill., graph. Darst.}, year = {1996}, language = {en} } @book{JacobsJarke1994, author = {Jacobs, Stephan and Jarke, Matthias}, title = {Requirements information management : the NATURE approach / RWTH Aachen, Fachgruppe Informatik. M. Jarke}, publisher = {RWTH, Fachgruppe Informatik}, address = {Aachen}, pages = {27 S : graph. Darst.}, year = {1994}, language = {en} } @article{JacobsJarkePohl1994, author = {Jacobs, Stephan and Jarke, Matthias and Pohl, Klaus}, title = {Requirements Engineering 1993}, series = {Automated software engineering : the international journal of automated reasoning and artificial intelligence in software engineering. Vol. 1 (1994), H. No. 1}, journal = {Automated software engineering : the international journal of automated reasoning and artificial intelligence in software engineering. Vol. 1 (1994), H. No. 1}, isbn = {0928-8910}, year = {1994}, language = {en} } @article{JacobsGrobKethers1994, author = {Jacobs, Stephan and Grob, Robert and Kethers, Stefanie}, title = {Towards CIS in Quality Management - Integration of Agents and Methods / Robert Grob, Stephan Jacobs, Stefanie Kethers}, series = {Proceedings of the Second International Conference on Cooperative Information Systems : May 17 - 20, 1994, Toronto, Canada / sponsored by the University of Toronto. Editors: Michael Brodie}, journal = {Proceedings of the Second International Conference on Cooperative Information Systems : May 17 - 20, 1994, Toronto, Canada / sponsored by the University of Toronto. Editors: Michael Brodie}, publisher = {University of Toronto Press}, address = {Toronto}, year = {1994}, language = {en} } @article{Jacobs1994, author = {Jacobs, Stephan}, title = {A Fault Diagnosis System Using Temporary Relations between Symptoms}, series = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)}, journal = {Operations research '93 : extended abstracts of the 18th Symposium on Operations Research held at the University of Cologne, September 1 - 3, 1993 / Achim Bachem ... (ed.)}, publisher = {Physica-Verl.}, address = {Heidelberg}, isbn = {379080794X}, pages = {XXVI, 550 S : graph. Darst.}, year = {1994}, language = {en} } @article{JacobsJarkePohletal.1993, author = {Jacobs, Stephan and Jarke, Matthias and Pohl, Klaus and Bubenko, Janis}, title = {Requirements Engineering : An Integrated View of Representations, Process, and Domain / Jarke, Matthias ; Pohl, Klaus ; Jacobs, Stephan ; Bubenko, Janis ...}, series = {Software engineering : 4th European Software Engineering Conference Garmisch-Partenkirchen, Germany, September 13 - 17, 1993 ; proceedings / ESEC '93. Ian Sommerville ... (eds.)}, journal = {Software engineering : 4th European Software Engineering Conference Garmisch-Partenkirchen, Germany, September 13 - 17, 1993 ; proceedings / ESEC '93. Ian Sommerville ... (eds.)}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-57209-0}, pages = {100 -- 114}, year = {1993}, language = {en} } @article{JacobsQuernheimAghadavoodiJolfaei1991, author = {Jacobs, Stephan and Quernheim, Ulrich and Aghadavoodi Jolfaei, Masoud}, title = {Performance Evalutation of three Access Protocols for VSAT Networks / Ulrich Quernheim, Stephan Jacobs, Masoud Aghadavoodi Jolfaei}, series = {Proceedings of the second European Conference on Satellite Communications : ECSC-2 ; Palais de Congr{\`e}s, Li{\`e}ge, Belgium, 22 - 24 October 1991 / [ed.: Brigitte Kaldeich]}, journal = {Proceedings of the second European Conference on Satellite Communications : ECSC-2 ; Palais de Congr{\`e}s, Li{\`e}ge, Belgium, 22 - 24 October 1991 / [ed.: Brigitte Kaldeich]}, publisher = {ESA Publ. Div.}, address = {Noordwijk}, isbn = {92-9092-170-6}, pages = {XXXII, 533 S. : Ill., graph. Darst.}, year = {1991}, language = {en} } @article{JacobsQuernheim1990, author = {Jacobs, Stephan and Quernheim, Ulrich}, title = {ARQ Error Control for Multipoint Satellite Communications / Ulrich Quernheim, Stephan Jacobs}, series = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay}, journal = {Computer networking : proceedings of the IFIP TC 6 Conference on Computer Networking, COMNET '90, Budapest, Hungary, 8-10 May, 1990 / edited by L{\´a}szl{\´o} Csaba, Tibor Szentiv{\´a}nyi, Katie Tarnay}, publisher = {Elsevier}, address = {New York, N.Y.}, isbn = {0444888721}, pages = {xi, 505 p : ill}, year = {1990}, language = {en} } @article{Grap2003, author = {Grap, Rolf Dietmar}, title = {Determining manpower requirements in a spinning mill}, series = {Chemical fibers international : CFI ; fiber polymers, fibers, texturing, and spunbonds (2003)}, journal = {Chemical fibers international : CFI ; fiber polymers, fibers, texturing, and spunbonds (2003)}, isbn = {0340-3343}, pages = {455 -- 458}, year = {2003}, language = {en} } @article{Jacobs1999, author = {Jacobs, Stephan}, title = {Introducing Measurable Requirements: A Case Study}, series = {Proceedings : June 7 - 11, 1999, University of Limerick, Limerick, Ireland / sponsored by IEEE Computer Society Technical Council on Software Engineering. In cooperation with ACM SIGSOFT}, journal = {Proceedings : June 7 - 11, 1999, University of Limerick, Limerick, Ireland / sponsored by IEEE Computer Society Technical Council on Software Engineering. In cooperation with ACM SIGSOFT}, isbn = {0769501885}, year = {1999}, language = {en} } @article{GebhardtJarkeJacobs1997, author = {Gebhardt, Michael and Jarke, Matthias and Jacobs, Stephan}, title = {A Toolkit for Negotiation Support Interfaces to Multidimensional Data}, series = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman}, journal = {SIGMOD 1997 : proceedings ACM SIGMOD International Conference on Management of Data, May 13 - 15, 1997, Tucson, Arizona, USA / ed. by Joan M. Peckman}, publisher = {ACM Press}, address = {New York, NY}, isbn = {0897919114}, pages = {XIV, 586 S : Ill., graph. Darst.}, year = {1997}, language = {en} }