@inproceedings{DachwaldXuFeldmannetal.2011,
  author    = {Dachwald, Bernd and Xu, Changsheng and Feldmann, Marco and Plescher, Engelbert},
  title     = {IceMole : Development of a novel subsurface ice probe and testing of the first prototype on the Morteratsch Glacier},
  series = {EGU General Assembly 2011 Vienna | Austria | 03 - 08 April 2011},
  booktitle = {EGU General Assembly 2011 Vienna | Austria | 03 - 08 April 2011},
  year      = {2011},
  abstract  = {We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named "IceMole", is currently developed, built, and tested at the FH Aachen University of Applied Sciences' Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).},
  language  = {en}
}
@inproceedings{DachwaldXuFeldmannetal.2011,
  author    = {Dachwald, Bernd and Xu, Changsheng and Feldmann, Marco and Plescher, Engelbert and Digel, Ilya and Artmann, Gerhard},
  title     = {Development and testing of a subsurface probe for detection of life in deep ice : [abstract]},
  year      = {2011},
  abstract  = {We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named "IceMole", is currently developed, built, and tested at the FH Aachen University of Applied Sciences' Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).},
  subject      = {Eisschicht},
  language  = {en}
}
@inproceedings{Dahmann2011,
  author    = {Dahmann, Peter},
  title     = {Stemme S10 VTX als multifunktionales Forschungsflugzeug},
  series = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  booktitle = {Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband},
  publisher = {Dt. Gesellschaft f{\"u}r Luft- und Raumfahrt},
  address   = {Bonn},
  isbn      = {978-3-9321-8274-7},
  pages     = {357 -- 364},
  year      = {2011},
  language  = {de}
}
@inproceedings{DalguerChurilovButenwegetal.2014,
  author    = {Dalguer, Luis A. and Churilov, Sergey and Butenweg, Christoph and Renault, Philippe and Hyun, An Jun},
  title     = {Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS},
  series = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  booktitle = {Workshop SMART2013 : Paris, France, November 25th - 27th, 2014},
  organization    = {Workshop SMART2013 <2014, Paris>},
  pages     = {1 -- 12},
  year      = {2014},
  language  = {en}
}
@inproceedings{DalguerRenaultChurilovetal.2016,
  author    = {Dalguer, Luis A. and Renault, Philippe and Churilov, Sergey and Butenweg, Christoph},
  title     = {Evaluation of fragility curves for a three-storey-reinforced-concrete mock-up of SMART 2013 project},
  series = {Transactions, SMiRT-23 : 23rd Conference on Structural Mechanics in Reactor Technology : Manchester, United Kingdom - August 10-14, 2015},
  booktitle = {Transactions, SMiRT-23 : 23rd Conference on Structural Mechanics in Reactor Technology : Manchester, United Kingdom - August 10-14, 2015},
  organization    = {Conference on Structural Mechanics in Reactor Technology <23, 2015, Manchester>},
  pages     = {1 -- 9},
  year      = {2016},
  language  = {en}
}
@inproceedings{DammRahierRitzetal.2013,
  author    = {Damm, Sebastian and Rahier, Michael and Ritz, Thomas and Sch{\"a}fer, Thomas},
  title     = {Architecture for platform- and hardware-independent mesh networks : how to unify the channels},
  series = {ICSNC 2013 : The Eighth International Conference on Systems and Networks Communications ; October 27, 2013 to October 31, 2013, Venice Italy},
  booktitle = {ICSNC 2013 : The Eighth International Conference on Systems and Networks Communications ; October 27, 2013 to October 31, 2013, Venice Italy},
  editor    = {Davoli, Renzo},
  publisher = {Curran Associates},
  address   = {Red Hook, NY},
  isbn      = {978-1-61208-305-6},
  pages     = {131 -- 134},
  year      = {2013},
  abstract  = {This paper will prove that mesh networks among different platforms and hardware channels can help to channel valuable information even if public telecommunication infrastructure is not available due to arbitrary reasons. Therefore, results of a simulation for mesh networks on mass events will be provided, followed by the developed architecture and an outlook on future research. The developed architecture is currently being implemented and field tested on mass events.},
  language  = {en}
}
@inproceedings{DammRitzStrauch2011,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Muster und Cloud Computing als Plattformstrategie f{\"u}r mobile Unternehmenssoftware},
  series = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  booktitle = {Mobile und ubiquit{\"a}re Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)},
  editor    = {H{\"o}pfner, Hagen},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-279-6},
  pages     = {91 -- 104},
  year      = {2011},
  language  = {de}
}
@inproceedings{DammRitzStrauch2010,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Benutzerzentrierte Anforderungsanalyse f{\"u}r die Produktlinien-Entwicklung mobiler Unternehmenssoftware},
  series = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  booktitle = {EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beitr{\"a}ge des Workshops der GI-Fachgruppe Entwicklungsmethoden f{\"u}r Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)},
  editor    = {Klink, Stefan},
  publisher = {Ges. f{\"u}r Informatik},
  address   = {Bonn},
  isbn      = {978-3-88579-266-6},
  pages     = {117 -- 130},
  year      = {2010},
  language  = {de}
}
@inproceedings{DammRitzStrauch2011,
  author    = {Damm, Sebastian and Ritz, Thomas and Strauch, Jakob},
  title     = {Adaption of archetype patterns for mobile cloud-based business apps},
  series = {2011 IEEE International Conference on Pervasive Computing and Communications workshops (PerCom workshops 2011) : Seattle, Washington, USA, 21 - 25 March 2011},
  booktitle = {2011 IEEE International Conference on Pervasive Computing and Communications workshops (PerCom workshops 2011) : Seattle, Washington, USA, 21 - 25 March 2011},
  publisher = {IEEE Service Center},
  address   = {Piscataway, NJ},
  isbn      = {978-1-61284-938-6 (Print)},
  doi       = {10.1109/PERCOMW.2011.5766849},
  pages     = {100 -- 105},
  year      = {2011},
  language  = {en}
}
@inproceedings{DannenSchindelePruemmeretal.2022,
  author    = {Dannen, Tammo and Schindele, Benedikt and Pr{\"u}mmer, Marcel and Arntz, Kristian and Bergs, Thomas},
  title     = {Methodology for the self-optimizing determination of additive manufacturing process eligibility and optimization potentials in toolmaking},
  series = {Procedia CIRP Leading manufacturing systems transformation - Proceedings of the 55th CIRP Conference on Manufacturing Systems 2022},
  volume    = {107},
  booktitle = {Procedia CIRP Leading manufacturing systems transformation - Proceedings of the 55th CIRP Conference on Manufacturing Systems 2022},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.05.188},
  pages     = {1539 -- 1544},
  year      = {2022},
  abstract  = {Additive Manufacturing (AM) of metallic workpieces faces a continuously rising technological relevance and market size. Producing complex or highly strained unique workpieces is a significant field of application, making AM highly relevant for tool components. Its successful economic application requires systematic workpiece based decisions and optimizations. Considering geometric and technological requirements as well as the necessary post-processing makes deciding effortful and requires in-depth knowledge. As design is usually adjusted to established manufacturing, associated technological and strategic potentials are often neglected. To embed AM in a future proof industrial environment, software-based self-learning tools are necessary. Integrated into production planning, they enable companies to unlock the potentials of AM efficiently. This paper presents an appropriate methodology for the analysis of process-specific AM-eligibility and optimization potential, added up by concrete optimization proposals. For an integrated workpiece characterization, proven methods are enlarged by tooling-specific figures. The first stage of the approach specifies the model's initialization. A learning set of tooling components is described using the developed key figure system. Based on this, a set of applicable rules for workpiece-specific result determination is generated through clustering and expert evaluation. Within the following application stage, strategic orientation is quantified and workpieces of interest are described using the developed key figures. Subsequently, the retrieved information is used for automatically generating specific recommendations relying on the generated ruleset of stage one. Finally, actual experiences regarding the recommendations are gathered within stage three. Statistic learning transfers those to the generated ruleset leading to a continuously deepening knowledge base. This process enables a steady improvement in output quality.},
  language  = {en}
}
@inproceedings{DarvenizaFlisowskiKernetal.2002,
  author    = {Darveniza, M. and Flisowski, Z. and Kern, Alexander and Landers, E.-U. and LoPiparo, G. and Mazzetti, C. and Rousseau, A. and Sherlock, J.},
  title     = {Application problems of the probabilistic approach to the assessment of risk for structures and services},
  year      = {2002},
  abstract  = {The paper deals with the development of the probabilistic approach to the assessment of risk due to lightning. Sources of damage, types of damage and types of loss are defined and, accordingly, the procedure for risk analysis and the way of assessment of different risk components is proposed. The way to evaluate the influence of different protection measures (lightning protection system; shielding of structure, cables and equipment; routing of internal wiring; surge protective device) in reducing such probabilities is considered. The paper has been prepared within the framework of the activity of IEC TC81-WG9/CLC TC81-WG4 directed to prepare the draft IEC 62305-2 Risk Management, in cooperation with the Secretary of IEC/CLC TC81.},
  language  = {en}
}
@inproceedings{deHondePorstDigel2017,
  author    = {de Honde, Lukas and Porst, Dariusz and Digel, Ilya},
  title     = {A randomized, observational thermographic study of the neck region before and after a physiotherapeutic intervention},
  series = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  booktitle = {2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West},
  editor    = {Fischerauer, Alice},
  publisher = {Universit{\"a}t Duisburg-Essen},
  address   = {Duisburg},
  organization    = {MedTech Symposium},
  isbn      = {978-3-9814801-9-1},
  doi       = {10.17185/duepublico/43984},
  pages     = {122 -- 123},
  year      = {2017},
  language  = {en}
}
@inproceedings{DerschGeyerHerrmannetal.2002,
  author    = {Dersch, J{\"u}rgen and Geyer, Michael and Herrmann, Ulf and Jones, Scott A. and Kelly, Bruce and Kistner, Rainer and Ortmanns, Winfried and Pitz-Paal, Robert and Price, Henry},
  title     = {Trough integration into power plants : a study on the performance and economy of integrated solar combined cycle systems},
  series = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  booktitle = {Proceedings of the 11th SolarPACES International Symposium on Concentrated Solar Power and Chemical Energy Technologies : September 4 - 6, 2002, Zurich, Switzerland / Paul Scherrer Institut, PSI; ETH, Eidgen{\"o}ssische Technische Hochschule Z{\"u}rich},
  editor    = {Steinfeld, Aldo},
  publisher = {Paul Scherrer Inst.},
  address   = {Villingen},
  isbn      = {3-9521409-3-7},
  pages     = {661 -- 671},
  year      = {2002},
  language  = {en}
}
@inproceedings{DerschGeyerHerrmannetal.2002,
  author    = {Dersch, J{\"u}rgen and Geyer, Michael and Herrmann, Ulf and Jones, Scott A. and Kelly, Bruce and Kistner, Rainer and Ortmanns, Winfried and Pitz-Paal, Robert and Price, Henry},
  title     = {Solar Trough Integration Into Combined Cycle Systems},
  series = {Solar engineering 2002 : proceedings of the International Solar Energy Conference ; presented at the 2002 International Solar Energy Conference, a part of Solar 2002 - Sunrise on the Reliable Energy Economy, June 15 - 20, 2002, Reno, Nevada},
  booktitle = {Solar engineering 2002 : proceedings of the International Solar Energy Conference ; presented at the 2002 International Solar Energy Conference, a part of Solar 2002 - Sunrise on the Reliable Energy Economy, June 15 - 20, 2002, Reno, Nevada},
  editor    = {Pearson, J. Boise},
  publisher = {ASME},
  isbn      = {0-7918-1689-3},
  doi       = {doi:10.1115/SED2002-1072},
  pages     = {351 -- 359},
  year      = {2002},
  language  = {en}
}
@inproceedings{DeterdingTippkoetterUlber2006,
  author    = {Deterding, A. and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Online-Essigs{\"a}ureanalytik in Fermentationsbr{\"u}hen mittels Fließdiffusionstechnik (FDT)},
  series = {Technische Systeme f{\"u}r Biotechnologie und Umwelt : 13. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 25.09. - 27.09.2006},
  booktitle = {Technische Systeme f{\"u}r Biotechnologie und Umwelt : 13. Heiligenst{\"a}dter Kolloquium, Heilbad Heiligenstadt, 25.09. - 27.09.2006},
  editor    = {Beckmann, Dieter},
  address   = {Heiligenstadt},
  organization    = {Institut f{\"u}r Bioprozeß- und Analysenmeßtechnik},
  isbn      = {978-3-00-018621-9},
  pages     = {273 -- 280},
  year      = {2006},
  language  = {de}
}
@inproceedings{DetertGligorevicHaaketal.2003,
  author    = {Detert, T. and Gligorevic, Snjezana and Haak, W. and Sorger, Ulrich},
  title     = {Maximum-likelihood channel estimation using the spreading matrix in fast time-variant frequency selective channels},
  series = {Proceedings of the 3rd IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2003 : 14 - 17 December 2003, Darmstadt, Germany},
  booktitle = {Proceedings of the 3rd IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2003 : 14 - 17 December 2003, Darmstadt, Germany},
  organization    = {Institute of Electrical and Electronics Engineers},
  isbn      = {0-7803-8292-7},
  pages     = {347 -- 350},
  year      = {2003},
  language  = {en}
}
@inproceedings{DeyElsenFerreinetal.2021,
  author    = {Dey, Thomas and Elsen, Ingo and Ferrein, Alexander and Frauenrath, Tobias and Reke, Michael and Schiffer, Stefan},
  title     = {CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom},
  series = {PETRA '21: Proceedings of the 14th Pervasive Technologies Related to Assistive Environments Conference},
  booktitle = {PETRA '21: Proceedings of the 14th Pervasive Technologies Related to Assistive Environments Conference},
  editor    = {Makedon, Fillia},
  publisher = {Association for Computing Machinery},
  address   = {New York},
  isbn      = {9781450387927},
  doi       = {10.1145/3453892.3462697},
  pages     = {292 -- 299},
  year      = {2021},
  abstract  = {In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway.},
  language  = {en}
}
@inproceedings{DiIorioNobileStapenhorst2010,
  author    = {Di Iorio, Marina and Nobile, Maria Luna and Stapenhorst, Carolin},
  title     = {Martinella},
  series = {Edifici alti e paesaggio},
  booktitle = {Edifici alti e paesaggio},
  editor    = {Bovati, Marco and Di Franco, Andrea},
  publisher = {Maggioli},
  address   = {Santarcangelo di Romagna},
  isbn      = {978-88-387-4434-1},
  pages     = {191 -- 202},
  year      = {2010},
  language  = {it}
}
@inproceedings{Dielmann2002,
  author    = {Dielmann, Klaus-Peter},
  title     = {Darstellung des Erneuerbaren Energiegesetzes (EEG) und dessen Auswirkungen},
  year      = {2002},
  abstract  = {Erneuerbares Energien-Gesetz: Anwendungsbereich, Abnahme- und Verg{\"u}tungspflicht, Verg{\"u}tungss{\"a}tze, Netzkosten, Ausgleichsregelungen Auswirkungen des EEG: Photovoltaik, Windkraft, Biomasse, Wasserkraft, Kl{\"a}r-, Deponie- und Grubengas, Geothermie Zusammenfassung und Ausblick},
  subject      = {Energierecht},
  language  = {de}
}
@inproceedings{Dielmann2001,
  author    = {Dielmann, Klaus-Peter},
  title     = {Umsetzung Strom-/Gasmarkt nach der Liberalisierung},
  year      = {2001},
  abstract  = {Neues Energierecht Strom Neues Energierecht Gas Emissionshandel in Europa - ein interessanter Markt?},
  subject      = {Energierecht},
  language  = {de}
}