@misc{AchtenBauerBertrametal.2005,
  author    = {Achten, Richard and Bauer, Andreas and Bertram, Walter and Cremer, Markus and Daemen, Jos and Dehnhardt, Markus and Fleischer, Manfred and Kirchner, Peter and Leyendecker, Marco and Pietrzyk, Uwe and Schmitz, Jakob and Ziemons, Karl and Zilles, Karl},
  title     = {Vorrichtung zum Halten eines lebenden Objektes bei physiologischen Messungen},
  pages     = {1 -- 17},
  year      = {2005},
  abstract  = {Die vorliegende Erfindung betrifft eine Vorrichtung zum Halten eines lebenden Objektes bei physiologischen Messungen mit einem Basiselement und Mitteln zum Arretieren des lebenden Objektes, die atraumatische Ohrenhalter sowie ein Mundst{\"u}ck aufweisen, das mit einer Aussparung f{\"u}r die Z{\"a}hne des Lebewesens versehen ist, mit einem Masseanteil von wenigstens 95\% an glasfaserverst{\"a}rktem Kunststoff.},
  language  = {de}
}
@phdthesis{Achtsnicht2020,
  author    = {Achtsnicht, Stefan},
  title     = {Multiplex-Magnetdetektion von superparamagnetischen Beads zur Identifizierung von Trinkwasserkontaminationen},
  doi       = {10.18154/RWTH-2020-12052},
  pages     = {144 Seiten},
  year      = {2020},
  abstract  = {Die qualitative und quantitative Detektion von Zielsubstanzen innerhalb einer w{\"a}ssrigen Probe ist f{\"u}r viele Fragestellungen von Interesse, etwa bei der Detektion von Kontaminationen in Trinkwasser in Krisensituationen. Hierbei ist es nicht nur wichtig, dass Pathogene m{\"o}glichst sensitiv detektiert werden k{\"o}nnen, sondern auch, dass die Analyse schnell erfolgt, um Betroffenen im Katastrophenfall z{\"u}gig sicheres Trinkwasser zu Verf{\"u}gung stellen zu k{\"o}nnen. Da bei einem solchen Szenario nicht von einer in der N{\"a}he befindlichen funktionierenden Laborinfrastruktur ausgegangen werden kann, ist es wichtig, dass die Messung direkt vor Ort erfolgen kann. Im Rahmen dieser Arbeit wurde untersucht, ob eine derartige Schnellanalytik mithilfe von superparamagnetischen Beads (MBs) und der magnetischen Frequenzmischtechnik m{\"o}glich ist. Dabei werden die MBs mit Hilfe von prim{\"a}ren Antik{\"o}rpern an die Zielsubstanz gebunden und mit sekund{\"a}ren Antik{\"o}rpern an die Poren-Oberfl{\"a}che eines Polyethylen-Filters fixiert (Sandwich-Immunoassay). So kann die Quantifizierung der Zielsubstanz auf eine magnetische Messung der immobilisierten MB-Marker zur{\"u}ckgef{\"u}hrt werden. Die magnetische Frequenzmischtechnik basiert auf der Anregung der Probe mit Magnetfeldern zweier verschiedener Frequenzen. Die durch die nichtlineare Magnetisierungsform der superparamagnetischen MBs entstehenden Mischfrequenzen werden typischerweise mithilfe einer zweistufigen Lock-in-Detektion analysiert (analoge Demodulation), die in einem Magnetreader als Handheldger{\"a}t realisiert wurde. Zus{\"a}tzlich zu dieser Technik wurde das Prinzip der direkten Digitalisierung des gesamten Antwortsignals mit anschließender Fourier-Analyse der erzeugten Mischfrequenzen experimentell umgesetzt, um die Amplituden und Phasen mehrerer Mischfrequenzen simultan zu erfassen. Eine M{\"o}glichkeit zur Sensitivit{\"a}tssteigerung ist die magnetische Aufkonzentration, indem vor der magnetischen Analyse eine Separation der MBs aus einem gr{\"o}ßeren Probenvolumen mittels magnetischem Feldgradienten durchgef{\"u}hrt wird. Zur Charakterisierung verschiedener kommerzieller MBs hinsichtlich ihrer magnetischen Separierbarkeit wurde ein Aufbau zur Messung ihrer magnetophoretischen Beweglichkeiten realisiert und ihre Geschwindigkeiten im Gradientenfeld mikroskopisch gemessen.Da eine Probe oftmals nicht nur auf eine einzige Zielsubstanz, sondern simultan auf mehrere verschiedene Pathogene hin untersucht werden soll, wurden verschiedene Ans{\"a}tze entwickelt und getestet, die einen solchen multiparametrischen magnetischen Immunoassay erm{\"o}glichen. Einerseits wurde eine r{\"a}umliche Separation der Bindungsbereiche f{\"u}r verschiedene Zielsubstanzen realisiert, die sequentiell ausgewertet werden k{\"o}nnen. Andererseits wurde die Unterscheidung von verschiedenen Zielsubstanzen anhand der Charakteristika der an sie gebundenen, verschieden funktionalisierten MB-Typen untersucht. F{\"u}r eine solche Unterscheidung wurde zum einen die Anregefrequenz der magnetischen Frequenzmischtechnik w{\"a}hrend einer Messung variiert. Damit konnte gezeigt werden, dass sich verschiedene MB-Sorten anhand der Phase ihrer Frequenzmischsignale voneinander unterscheiden lassen. Weiterhin wurde gezeigt, dass sich der Signalverlauf einer bin{\"a}ren Mischung zweier verschiedener MB-Typen als gradueller {\"U}bergang der Verl{\"a}ufe der beiden reinen MB-L{\"o}sungen ergibt. Eine weitere Analysemethode f{\"u}r einen multiparametrischen Immunoassay besteht darin, ein zus{\"a}tzliches einstellbares statisches magnetisches Offsetfeld zu verwenden. Hierf{\"u}r wurden mehrere Aufbauten auf Basis von Permanent- und Elektromagneten simuliert, konstruiert und charakterisiert. Mithilfe von Simulationen konnte gezeigt werden, dass eine auf diesem Verfahren beruhende Unterscheidung f{\"u}r MBs mit unterschiedlichen magnetischen Partikelmomenten m{\"o}glich ist. Als direkte Anwendung des hier entwickelten Magnetreaders in Zusammenspiel mit der digitalen Demodulation wurde ein magnetischer Assay gegen die B-Untereinheit des Choleratoxins in Trinkwasser mit einem niedrigen Detektionslimit von 0,2 ng/ml demonstriert.},
  language  = {de}
}
@article{AchtsnichtNeuendorfFassbenderetal.2019,
  author    = {Achtsnicht, Stefan and Neuendorf, Christian and Faßbender, Tobias and N{\"o}lke, Greta and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {Sensitive and rapid detection of cholera toxin subunit B using magnetic frequency mixing detection},
  series = {Plos One},
  volume    = {14},
  journal   = {Plos One},
  number    = {7},
  publisher = {Plos},
  address   = {San Francisco},
  issn      = {1932-6203},
  doi       = {10.1371/journal.pone.0219356},
  pages     = {e0219356},
  year      = {2019},
  abstract  = {Cholera is a life-threatening disease caused by the cholera toxin (CT) as produced by some Vibrio cholerae serogroups. In this research we present a method which directly detects the toxin's B subunit (CTB) in drinking water. For this purpose we performed a magnetic sandwich immunoassay inside a 3D immunofiltration column. We used two different commercially available antibodies to capture CTB and for binding to superparamagnetic beads. ELISA experiments were performed to select the antibody combination. The beads act as labels for the magnetic frequency mixing detection technique. We show that the limit of detection depends on the type of magnetic beads. A nonlinear Hill curve was fitted to the calibration measurements by means of a custom-written python software. We achieved a sensitive and rapid detection of CTB within a broad concentration range from 0.2 ng/ml to more than 700 ng/ml.},
  language  = {en}
}
@article{AchtsnichtPourshahidiOffenhaeusseretal.2019,
  author    = {Achtsnicht, Stefan and Pourshahidi, Ali Mohammad and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim},
  title     = {Multiplex detection of different magnetic beads using frequency scanning in magnetic frequency mixing technique},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {11},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19112599},
  pages     = {13 Seiten},
  year      = {2019},
  abstract  = {In modern bioanalytical methods, it is often desired to detect several targets in one sample within one measurement. Immunological methods including those that use superparamagnetic beads are an important group of techniques for these applications. The goal of this work is to investigate the feasibility of simultaneously detecting different superparamagnetic beads acting as markers using the magnetic frequency mixing technique. The frequency of the magnetic excitation field is scanned while the lower driving frequency is kept constant. Due to the particles' nonlinear magnetization, mixing frequencies are generated. To record their amplitude and phase information, a direct digitization of the pickup-coil's signal with subsequent Fast Fourier Transformation is performed. By synchronizing both magnetic beads using frequency scanning in magnetic frequency mixing technique magnetic fields, a stable phase information is gained. In this research, it is shown that the amplitude of the dominant mixing component is proportional to the amount of superparamagnetic beads inside a sample. Additionally, it is shown that the phase does not show this behaviour. Excitation frequency scans of different bead types were performed, showing different phases, without correlation to their diverse amplitudes. Two commercially available beads were selected and a determination of their amount in a mixture is performed as a demonstration for multiplex measurements.},
  language  = {en}
}
@article{AchtsnichtSchoenenbornOffenhaeusseretal.2019,
  author    = {Achtsnicht, Stefan and Sch{\"o}nenborn, Kristina and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim},
  title     = {Measurement of the magnetophoretic velocity of different superparamagnetic beads},
  series = {Journal of Magnetism and Magnetic Materials},
  volume    = {477},
  journal   = {Journal of Magnetism and Magnetic Materials},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0304-8853},
  doi       = {10.1016/j.jmmm.2018.10.066},
  pages     = {244 -- 248},
  year      = {2019},
  abstract  = {The movement of magnetic beads due to a magnetic field gradient is of great interest in different application fields. In this report we present a technique based on a magnetic tweezers setup to measure the velocity factor of magnetically actuated individual superparamagnetic beads in a fluidic environment. Several beads can be tracked simultaneously in order to gain and improve statistics. Furthermore we show our results for different beads with hydrodynamic diameters between 200 and 1000 nm from diverse manufacturers. These measurement data can, for example, be used to determine design parameters for a magnetic separation system, like maximum flow rate and minimum separation time, or to select suitable beads for fixed experimental requirements.},
  language  = {en}
}
@article{AchtsnichtToedterNiehuesetal.2019,
  author    = {Achtsnicht, Stefan and T{\"o}dter, Julia and Niehues, Julia and Tel{\"o}ken, Matthias and Offenh{\"a}usser, Andreas and Krause, Hans-Joachim and Schr{\"o}per, Florian},
  title     = {3D printed modular immunofiltration columns for frequency mixing-based multiplex magnetic immunodetection},
  series = {Sensors},
  volume    = {19},
  journal   = {Sensors},
  number    = {1},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s19010148},
  pages     = {15 Seiten},
  year      = {2019},
  abstract  = {For performing point-of-care molecular diagnostics, magnetic immunoassays constitute a promising alternative to established enzyme-linked immunosorbent assays (ELISA) because they are fast, robust and sensitive. Simultaneous detection of multiple biomolecular targets from one body fluid sample is desired. The aim of this work is to show that multiplex magnetic immunodetection based on magnetic frequency mixing by means of modular immunofiltration columns prepared for different targets is feasible. By calculations of the magnetic response signal, the required spacing between the modules was determined. Immunofiltration columns were manufactured by 3D printing and antibody immobilization was performed in a batch approach. It was shown experimentally that two different target molecules in a sample solution could be individually detected in a single assaying step with magnetic measurements of the corresponding immobilization filters. The arrangement order of the filters and of a negative control did not influence the results. Thus, a simple and reliable approach to multi-target magnetic immunodetection was demonstrated.},
  language  = {en}
}
@article{Ackermann1996,
  author    = {Ackermann, Hans-Josef},
  title     = {Single chip hardware support for rasterization and texture mapping},
  series = {Computers \& graphics : CAG ; an international journal of applications in computer graphics. 20 (1996), H. 4},
  journal   = {Computers \& graphics : CAG ; an international journal of applications in computer graphics. 20 (1996), H. 4},
  isbn      = {0097-8493},
  pages     = {503 -- 514},
  year      = {1996},
  language  = {en}
}
@book{Ackermann1996,
  author    = {Ackermann, Hans-Josef},
  title     = {Hardware-Unterst{\"u}tzung f{\"u}r effiziente Dreiecksrasterisierung und texture mapping},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3826512081},
  pages     = {III, 162 S : Ill., graph. Darst.},
  year      = {1996},
  language  = {de}
}
@article{Ackermann1997,
  author    = {Ackermann, Hans-Josef},
  title     = {Morphing- und Level-of-Detail-Techniken zur Reduzierung des Darstellungsaufwands bei Echtzeit-Sichtsimulationen},
  series = {Digital controls for high resolution display : JESSI Europrojekt No. 3203000, AE-36 ; Abschlußbericht ; Laufzeit u. Berichtszeitraum: 01.01.1995 bis 31.12.1996.},
  journal   = {Digital controls for high resolution display : JESSI Europrojekt No. 3203000, AE-36 ; Abschlußbericht ; Laufzeit u. Berichtszeitraum: 01.01.1995 bis 31.12.1996.},
  address   = {Erlangen},
  year      = {1997},
  language  = {en}
}
@article{AckermannJaegerOsterfeldetal.1993,
  author    = {Ackermann, Hans-Josef and J{\"a}ger, Michael and Osterfeld, Utz and Hornung, Christoph},
  title     = {Building a Multimedia ISDN PC / J{\"a}ger, Michael ; Osterfeld, Utz ; Ackermann, Hans-Josef ; Hornung, Christoph},
  series = {Institute of Electrical and Electronics Engineers: IEEE computer graphics and applications. 13 (1993), H. 5},
  journal   = {Institute of Electrical and Electronics Engineers: IEEE computer graphics and applications. 13 (1993), H. 5},
  isbn      = {0272-1716},
  pages     = {24 -- 33},
  year      = {1993},
  language  = {en}
}
@book{AckermannMehlPeischl1990,
  author    = {Ackermann, Hans-Josef and Mehl, Max and Peischl, Markus},
  title     = {Modulares Graphik-Subsystem f{\"u}r die Echtzeitdarstellung von 3D-Anwendungen : Abschlußbericht ; Contract NT 2815-A-8 / Hans-Josef Ackermann; Max Mehl; Markus Peischl. Fachbereich Informatik, Technische Hochschule Darmstadt; Bundesministerium f{\"u}r Forschung und Technologie, Bonn},
  publisher = {Techn. Hochschule},
  address   = {Darmstadt},
  pages     = {ca. 100 S.},
  year      = {1990},
  language  = {de}
}
@masterthesis{Ackermann2024,
  type      = {Bachelor Thesis},
  author    = {Ackermann, Vincent},
  title     = {Filos : Design eines Front-Ends f{\"u}r das robotergef{\"u}hrte Laser-Osteotom-System STELLA.},
  publisher = {FH Aachen},
  address   = {Aachen},
  pages     = {70 Seiten},
  year      = {2024},
  abstract  = {In der Abschlussarbeit „FILOS" wurde in Zusammenarbeit mit dem Fraunhofer-Institut f{\"u}r Lasertechnik (ILT) ein Front-End f{\"u}r das laserbasierte Osteotom STELLA entwickelt. STELLA soll Kraniotomie (das Er{\"o}ffnen des Sch{\"a}dels) im wachen Zustand erm{\"o}glichen und erfordert eine benutzerfreundliche Bedienungsplattform sowie ein funktionales und {\"a}sthetisches Design. Das Ziel von „FILOS" war es, ein Geh{\"a}use zu entwerfen, das den medizinischen Anforderungen entspricht, und ein Bedienkonzept zu entwickeln, dass die Akzeptanz bei Patient:innen und Anwender:innen f{\"o}rdert. Durch Expert:innen-Interviews mit Neurochirurg:innen und enge Zusammenarbeit mit dem ILT wurde ein durchdachtes Design entwickelt. Dieses soll den Anforderungen der Anwender:innen gerecht werden, das zuk{\"u}nftige Operationssystem repr{\"a}sentieren und somit einen Mehrwert in der Medizin schaffen.},
  language  = {de}
}
@inproceedings{AdamsLosekammCzupalla2020,
  author    = {Adams, Moritz and Losekamm, Martin J. and Czupalla, Markus},
  title     = {Development of the Thermal Control System for the RadMap Telescope Experiment on the International Space Station},
  series = {International Conference on Environmental Systems},
  booktitle = {International Conference on Environmental Systems},
  pages     = {1 -- 10},
  year      = {2020},
  language  = {en}
}
@inproceedings{AdenackerGerhardsOttenetal.2021,
  author    = {Adenacker, J. and Gerhards, Benjamin and Otten, Christian and Schleser, Markus},
  title     = {Laserstrahlschweißen von Aluminium-Kupfer-Werkstoffkombinationen f{\"u}r die Elektromobilit{\"a}t},
  series = {DVS CONGRESS 2021},
  booktitle = {DVS CONGRESS 2021},
  publisher = {DVS Media GmbH},
  address   = {D{\"u}sseldorf},
  isbn      = {978-3-96144-146-4},
  pages     = {31 -- 38},
  year      = {2021},
  language  = {de}
}
@techreport{AdlerHeymerRichteretal.2009,
  author    = {Adler, J. and Heymer, H. and Richter, H. J. and Fend, Th. and Smirnova, O. and Rietbrock, P. and Petchenko, A. and Issendorff, F. v. and Steven, M. and Trimis, D. and Gonsior, Daniel and Helsper, Christoph and Hoffschmidt, Bernhard},
  title     = {INNOTRAP - innovative Rußfilter f{\"u}r LKW-Dieselmotoren : Abschlussbericht F{\"o}rderkennzeichen 16IN0313},
  pages     = {245 S. : Ill., graph. Darst.},
  year      = {2009},
  language  = {de}
}
@inproceedings{AdomeitWillms1984,
  author    = {Adomeit, G. and Willms, Herbert},
  title     = {Experimental investigation of the acceleration of deflagration in wake flow},
  series = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  booktitle = {Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities' Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1-3 October 1984 / Commission of the European Communities},
  editor    = {Skupinski, Edwin},
  publisher = {Graham \& Trotman [u.a.]},
  address   = {London Gaithersburg, Md.},
  isbn      = {0-86010-678-0},
  pages     = {294 -- 304},
  year      = {1984},
  language  = {en}
}
@techreport{AdomeitWillms1984,
  author    = {Adomeit, G. and Willms, Herbert},
  title     = {Experimental investigation of the acceleration of deflagration in wake flow : final report. - (Euratom-publications-EUR ; 9593 : Nuclear science and technology)},
  publisher = {Commission of the European Communities},
  address   = {Luxembourg},
  isbn      = {92-825-4699-3},
  pages     = {III, 119 S.},
  year      = {1984},
  language  = {en}
}
@article{AggarwalDhimanKumaretal.2012,
  author    = {Aggarwal, Pranav and Dhiman, Shashi K. and Kumar, G. and Scherer, Ulrich W. and Singla, M. L. and Srivastava, Alok},
  title     = {Optical study of poly(ethyleneterephthalate) modified by different ionizing radiation dose},
  series = {Indian Journal of Pure and Applied Physics},
  volume    = {50},
  journal   = {Indian Journal of Pure and Applied Physics},
  number    = {2},
  issn      = {0019-5596},
  pages     = {129 -- 132},
  year      = {2012},
  abstract  = {Thin films of poly(ethyleneterephthalate) [PET]were exposed to radiation dose ranging from 10 to 30 kGy by using gamma rays in the range 12.8-177.8 MGy using swift light ions of hydrogen. There was no effect of the radiation dose on the optical behaviour of PET as a result of exposure to radiation dose up to 30 kGy brought about by gamma rays but a significant decrease in the optical band gap values was observed when PET was exposed to swift light ions of hydrogen. The data obtained are discussed in terms of optical studies carried out on PET using swift heavy ions.},
  language  = {en}
}
@article{AggarwalSinghSinghetal.2011,
  author    = {Aggarwal, Prerna and Singh, Virendra and Singh, Arjun and Scherer, Ulrich W. and Singh, Tejvir and Singla, Madan L. and Srivastava, Alok},
  title     = {Physico-chemical transformations in swift heavy ion modified poly(ethyleneterephthalate)},
  series = {Radiation Physics and Chemistry},
  journal   = {Radiation Physics and Chemistry},
  publisher = {Pergamon Press},
  address   = {Oxford},
  isbn      = {0969-806X},
  pages     = {1 -- 28},
  year      = {2011},
  language  = {en}
}
@article{AggeloussisGiannakouAlbrachtetal.2010,
  author    = {Aggeloussis, Nickos and Giannakou, Erasmia and Albracht, Kirsten and Arampatzis, Adamantios},
  title     = {Reproducibility of fascicle length and pennation angle of gastrocnemius medialis in human gait in vivo},
  series = {Gait and Posture},
  volume    = {31},
  journal   = {Gait and Posture},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0966-6362},
  doi       = {10.1016/j.gaitpost.2009.08.249},
  pages     = {73 -- 77},
  year      = {2010},
  abstract  = {The purpose of the current study was to examine the reproducibility of fascicle length and pennation angle of gastrocnemius medialis while human walking. To the best of our knowledge, this is the first study of the reproducibility of fascicle length and pennation angle of gastrocnemius medialis in vivo during human gait. Twelve males performed 10 gait trials on a treadmill, in 2 separate days. B-mode ultrasonography, with the ultrasound probe firmly adjusted in the transverse and frontal planes using a special cast, was used to measure the fascicle length and the pennation angle of the gastrocnemius medialis (GM). A Vicon 624 system with three cameras operating at 120 Hz was also used to record the ankle and knee joint angles. The results showed that measurements of fascicle length and pennation angle showed high reproducibility during the gait cycle, both within the same day and between different days. Moreover, the root mean square differences between the repeated waveforms of both variables were very small, compared with their ranges (fascicle length: RMS = ∼3 mm, range: 38-63 mm; pennation angle: RMS = ∼1.5°, range: 22-32°). However, their reproducibility was lower compared to the joint angles. It was found that representative data have to be derived by a wide number of gait trials (fascicle length ∼six trials, pennation angle more than 10 trials), to assure the reliability of the fascicle length and pennation angle in human gait.},
  language  = {en}
}