@inproceedings{BudaWollert2011, author = {Buda, Aurel and Wollert, J{\"o}rg}, title = {Leistungsbewertung von Ultra Wideband Funktechnologien nach ECMA 368 f{\"u}r den Einsatz in industriellen Kommunikationssystemen}, series = {Kommunikation in der Automation : Magdeburg, 27. - 28.09.2011 ; 2. Jahreskolloquium Kommunikation in der Automation ; KOMMA 2011 / Ulrich Jumar ... (Hrsg.)}, booktitle = {Kommunikation in der Automation : Magdeburg, 27. - 28.09.2011 ; 2. Jahreskolloquium Kommunikation in der Automation ; KOMMA 2011 / Ulrich Jumar ... (Hrsg.)}, publisher = {ifak, Institut f{\"u}r Automation und Kommunikation e.V. Magdeburg an der Otto-von-Guericke-Universit{\"a}t Magdeburg}, address = {Magdeburg}, organization = {Jahreskolloquium Kommunikation in der Automation <2, 2011, Magdeburg>}, isbn = {978-3-940961-58-7}, pages = {1 CD-ROM}, year = {2011}, language = {de} } @inproceedings{BudaVredalWollert2007, author = {Buda, Aurel and Vredal, Andreas and Wollert, J{\"o}rg}, title = {Einfache Integration von funkgest{\"u}tzten Kommunikationssystemen in der Automation}, series = {Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung}, booktitle = {Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung}, editor = {Wollert, J{\"o}rg}, publisher = {Aka}, address = {Berlin}, organization = {Wireless-Technologies-Kongress <9, 2007, Stuttgart>}, isbn = {978-3-89838-084-3}, pages = {189 -- 198}, year = {2007}, language = {de} } @incollection{BudaSchuermannWollert2010, author = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Wireless technologies in factory automation}, series = {Factory automation / ed. by Javier Silvestre-Blanes}, booktitle = {Factory automation / ed. by Javier Silvestre-Blanes}, publisher = {Intech}, address = {London}, isbn = {978-953-7619-42-8}, pages = {29 -- 50}, year = {2010}, language = {en} } @inproceedings{BudaSchuermannWollert2008, author = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Automatische Generierung von Automatisierungsobjekten nach IEC 61131-3 zur einfachen Integration von Funkkomponenten in {\"u}bergeordnete Steuerungssysteme}, series = {Wireless automation : funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)}, booktitle = {Wireless automation : funkgest{\"u}tzte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Verein Deutscher Ingenieure / Kompetenzfeld Informationstechnik}, isbn = {978-3-18-092010-8 ; 3-18-092010-8}, pages = {75 -- 84}, year = {2008}, language = {de} } @inproceedings{BudaSchuermannWollert2008, author = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {A middleware approach for industrial wireless automation networks}, series = {Proceedings of the Eighth IASTED International Conference on Wireless \& Optical Communications : May 26 - 28, 2008, Qu{\´e}bec City, Quebec, Canada}, booktitle = {Proceedings of the Eighth IASTED International Conference on Wireless \& Optical Communications : May 26 - 28, 2008, Qu{\´e}bec City, Quebec, Canada}, publisher = {Acta Pr.}, address = {Anaheim, Calif.}, organization = {International Association of Science and Technology for Development}, isbn = {978-0-88986-743-7}, pages = {76 -- 82}, year = {2008}, language = {de} } @inproceedings{BudaSchuermannWollert2009, author = {Buda, Aurel and Sch{\"u}rmann, Volker and Wollert, J{\"o}rg}, title = {Funktechnologien im 2,45 GHz ISM Frequenzband: {\"U}berblick und Coexistenzeigenschaften}, series = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009. (VDI-Berichte ; 2067)}, booktitle = {Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009. (VDI-Berichte ; 2067)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, organization = {Automatisierungskongress <2009, Baden-Baden>}, isbn = {978-3-18-092067-2}, pages = {383 -- 386}, year = {2009}, language = {de} } @inproceedings{BudaSchneiderWollert2009, author = {Buda, Aurel and Schneider, Ulf and Wollert, J{\"o}rg}, title = {Performanceanalyse von Frequenzdiversit{\"a}t in IEEE 802.15.4 Netzwerken}, series = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)}, booktitle = {Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / J{\"o}rg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)}, publisher = {VDI-Verl.}, address = {D{\"u}sseldorf}, isbn = {978-3-18-380010-0}, pages = {29 -- 38}, year = {2009}, language = {de} } @inproceedings{BudaJozenfiniWollert2007, author = {Buda, Aurel and Jozenfini, B. and Wollert, J{\"o}rg}, title = {Mobile ad-hoc Network for home automation based on ZigBee application framework}, series = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, booktitle = {1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany}, publisher = {Design \& Elektronik}, address = {Poing}, organization = {European ZigBee Developer's Conference <1, 2007, M{\"u}nchen>}, pages = {1 -- 5}, year = {2007}, language = {en} } @article{BucurLazarescuPopetal.2019, author = {Bucur, Alexandru and Lazarescu, Lucian and Pop, Grigore Marian and Achimas, Gheorghe and Gebhardt, Andreas}, title = {Tribological performance of biodegradable lubricants under different surface roughness of tools}, series = {Academic Journal of Manufacturing Engineering}, volume = {17}, journal = {Academic Journal of Manufacturing Engineering}, number = {1}, issn = {1583-7904}, pages = {172 -- 178}, year = {2019}, language = {en} } @inproceedings{BraunChengLaietal.2019, author = {Braun, Sebastian and Cheng, Chi-Tsun and Lai, Chow Yin and Wollert, J{\"o}rg}, title = {Microservice Architecture for Automation - Realization by the example of a model-factory's manufacturing execution system}, series = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, booktitle = {Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019}, pages = {33 -- 37}, year = {2019}, language = {en} } @inproceedings{BraunChengDoweyetal.2020, author = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg}, title = {Survey on Security Concepts to Adapt Flexible Manufacturing and Operations Management based upon Multi-Agent Systems}, series = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE), Proceedings}, booktitle = {2020 IEEE 29th International Symposium on Industrial Electronics (ISIE), Proceedings}, publisher = {IEEE}, address = {New York, NY}, doi = {10.1109/ISIE45063.2020.9152210}, pages = {5 Seiten}, year = {2020}, abstract = {The increasing digitalization brings new opportunities but also puts new challenges to modern industrial systems. Software agents are one of the key technologies towards self-optimizing factories and are currently used to address the needs of cyber-physical production systems (CPPS). However their interplay in industrial settings needs to be understood better.This paper focusses on securing a cloud infrastructure for multi-agent systems for industrial sites. An industrial site contains multiple production processes that need to communicate with each other and each physical resource is abstracted with a software agent. This volatile architecture needs to be managed and protected from manipulation. The proposed infrastructure presents a security concept for TCP/IP communication between agents, machines, and external networks. It is based on open-source software and tested on a three-node edge cloud controlling a model-plant.}, language = {en} } @article{BraunChengDoweyetal.2021, author = {Braun, Sebastian and Cheng, Chi-Tsun and Dowey, Steve and Wollert, J{\"o}rg}, title = {Performance evaluation of skill-based order-assignment in production environments with multi-agent systems}, series = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, journal = {IEEE Journal of Emerging and Selected Topics in Industrial Electronics}, number = {Early Access}, publisher = {IEEE}, address = {New York}, issn = {2687-9735}, doi = {10.1109/JESTIE.2021.3108524}, year = {2021}, abstract = {The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.}, language = {en} } @techreport{BleckReisgenSchleseretal.2011, author = {Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Prahl, Ulrich and Mukherjee, Krishnendu and Abdurakhmanov, Aydemir}, title = {Konsistentes Materialmodell f{\"u}r Umwandlung und mechanische Eigenschaften beim Schweißen hochfester Mehrphasen-St{\"a}hle : IGF-Vorhaben 15548 N. (FAT-Schriftenreihe ; 234)}, publisher = {VDA}, address = {Berlin}, organization = {Forschungsvereinigung Automobiltechnik}, pages = {XVI, 17 - 174 S. Ill., graph. Darst.}, year = {2011}, language = {de} } @article{BernauKnoedlerEmontsetal.2022, author = {Bernau, C. R. and Kn{\"o}dler, Matthias and Emonts, Jessica and J{\"a}pel, Ronald Colin and Buyel, Johannes Felix}, title = {The use of predictive models to develop chromatography-based purification processes}, series = {Frontiers in Bioengineering and Biotechnology}, journal = {Frontiers in Bioengineering and Biotechnology}, number = {10}, publisher = {Frontiers Media}, address = {Lausanne}, issn = {2296-4185 (online-ressource)}, doi = {10.3389/fbioe.2022.1009102}, pages = {25 Seiten}, year = {2022}, abstract = {Chromatography is the workhorse of biopharmaceutical downstream processing because it can selectively enrich a target product while removing impurities from complex feed streams. This is achieved by exploiting differences in molecular properties, such as size, charge and hydrophobicity (alone or in different combinations). Accordingly, many parameters must be tested during process development in order to maximize product purity and recovery, including resin and ligand types, conductivity, pH, gradient profiles, and the sequence of separation operations. The number of possible experimental conditions quickly becomes unmanageable. Although the range of suitable conditions can be narrowed based on experience, the time and cost of the work remain high even when using high-throughput laboratory automation. In contrast, chromatography modeling using inexpensive, parallelized computer hardware can provide expert knowledge, predicting conditions that achieve high purity and efficient recovery. The prediction of suitable conditions in silico reduces the number of empirical tests required and provides in-depth process understanding, which is recommended by regulatory authorities. In this article, we discuss the benefits and specific challenges of chromatography modeling. We describe the experimental characterization of chromatography devices and settings prior to modeling, such as the determination of column porosity. We also consider the challenges that must be overcome when models are set up and calibrated, including the cross-validation and verification of data-driven and hybrid (combined data-driven and mechanistic) models. This review will therefore support researchers intending to establish a chromatography modeling workflow in their laboratory.}, language = {en} } @article{BergSchleserDelidovichetal.2018, author = {Berg, Alexander-Karl and Schleser, Markus and Delidovich, Artem and Houben, Alexander}, title = {Ultraschallunterst{\"u}tzter Schmelzklebstoffauftrag}, series = {adh{\"a}sion KLEBEN \& DICHTEN}, volume = {Volume 62}, journal = {adh{\"a}sion KLEBEN \& DICHTEN}, number = {Issue 12}, publisher = {Springer}, doi = {10.1007/s35145-018-0089-z}, pages = {32 -- 37}, year = {2018}, language = {de} } @techreport{BennerPlatt1986, author = {Benner, Joachim and Platt, Werner}, title = {Dynamisches Verhalten drehelastischer Kupplungen unter Ber{\"u}cksichtigung allgemeiner Materialgleichungen und Einbeziehung von Ausfallkriterien : Abschlußbericht; Berichtszeitraum 01. 07. 81 - 31. 05. 85. - (Forschungsheft / Forschungsvereinigung Antriebstechnik e.V. ; 221)}, publisher = {Forschungsvereinigung Antriebstechnik e.V.}, address = {Frankfurt/M.}, pages = {149 S. : zahlr. Ill.}, year = {1986}, language = {de} } @incollection{Benner2014, author = {Benner, Joachim}, title = {Berechnungsmethoden der W{\"a}lzlagerreibung und Einflussgr{\"o}ßen}, series = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014}, booktitle = {SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014}, publisher = {TUDpress Verl. der Wissenschaften}, address = {Dresden}, isbn = {978-3-944331-81-2}, pages = {151 -- 170}, year = {2014}, language = {de} } @techreport{Benner1982, author = {Benner, Joachim}, title = {Dynamisches Verhalten drehelastischer Kupplungen unter Ber{\"u}cksichtigung allgemeiner Materialgleichungen und Einbeziehung von Ausfallkriterien : Literaturrecherche; Berichtszeitraum 1981 - 1982. - (Forschungsheft / Forschungsvereinigung Antriebstechnik e.V. ; 132)}, publisher = {Forschungsvereinigung Antriebstechnik e.V.}, address = {Frankfurt/M.}, pages = {113 S. : zahlr. Ill.}, year = {1982}, language = {de} } @inproceedings{Benner1989, author = {Benner, Joachim}, title = {Schwingungstechnische Dimensionierung von Maschinens{\"a}tzen mit Stromrichtermotoren}, series = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)}, booktitle = {Antriebstechnisches Kolloquium '89 : Maschinen- und Anlagen{\"u}berwachung ; Elemente der Antriebstechnik im System ; neue Konzepte in der Antriebstechnik. - (Reihe IME-Leitfaden)}, editor = {Peeken, Heinz}, publisher = {Verl. T{\"U}V Rheinland}, address = {K{\"o}ln}, issn = {3-88585-639-5}, pages = {309 -- 333}, year = {1989}, language = {de} } @article{Benner1989, author = {Benner, Joachim}, title = {Schwingungsbelastung von drehzahlgeregelten Antrieben mit Stromrichtermotoren}, series = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.}, volume = {28}, journal = {Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.}, number = {12}, publisher = {Vereinigte Fachverl.}, address = {Mainz}, issn = {0341-2652}, pages = {49 -- 54}, year = {1989}, language = {de} }