@incollection{Pietsch2013,
  author    = {Pietsch, Wolfram},
  title     = {A framework for strategic positioning of IT-products},
  series = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  booktitle = {Software business : from physical products to software services and solutions : 4th International Conference on Software Business, ICSOB 2013; Potsdam; Germany; 11 June 2013 through 14 June 2013. (Lecture notes in business information processing ; 150)},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/978-3-642-39336-5_11},
  pages     = {102 -- 116},
  year      = {2013},
  abstract  = {IT Products are viewed and managed differently depending on the perspectives and the stage within the life cycle. A model is presented that integrates different perspectives and stages serving as an aid for the analysis of business models and focused positioning of IT-products. Four generic business models are analysed with regard to the product management function in general and the positioning field for IT-products specifically: off-the-shelf (license), license plus service, project, and system service (incl. cloud computing).},
  language  = {en}
}
@inproceedings{Pietsch1995,
  author    = {Pietsch, Wolfram},
  title     = {A framework of quality function deployment},
  series = {Quality management / eds.: M. Ross ... (Software quality management ; 3,1)},
  booktitle = {Quality management / eds.: M. Ross ... (Software quality management ; 3,1)},
  publisher = {Computational Mechanics Publ.},
  address   = {Southhampton},
  organization    = {International Conference on Software Quality Management <3, 1995, Sevilla>},
  isbn      = {1-85312-309-9},
  pages     = {419 -- 428},
  year      = {1995},
  language  = {en}
}
@article{Pietsch2015,
  author    = {Pietsch, Wolfram},
  title     = {Augmenting voice of the customer analysis by analysis of belief},
  series = {QFD-Forum},
  journal   = {QFD-Forum},
  number    = {30},
  issn      = {1431-6951},
  pages     = {1 -- 5},
  year      = {2015},
  language  = {en}
}
@article{PalmerLindemann2003,
  author    = {Palmer, J. W. and Lindemann, Markus},
  title     = {Business models and market mechanisms : evaluating efficiency in consumer electronic markets},
  series = {Data base and advanced information systems. Bd. 34 (2003), H. 2},
  journal   = {Data base and advanced information systems. Bd. 34 (2003), H. 2},
  issn      = {0105-9912},
  pages     = {23 -- 38},
  year      = {2003},
  language  = {en}
}
@article{MoehrenBergmannJanseretal.2024,
  author    = {M{\"o}hren, Felix and Bergmann, Ole and Janser, Frank and Braun, Carsten},
  title     = {Assessment of structural mechanical effects related to torsional deformations of propellers},
  series = {CEAS Aeronautical Journal},
  journal   = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Wien},
  issn      = {1869-5590 (eISSN)},
  doi       = {10.1007/s13272-024-00737-7},
  pages     = {22 Seiten},
  year      = {2024},
  abstract  = {Lifting propellers are of increasing interest for Advanced Air Mobility. All propellers and rotors are initially twisted beams, showing significant extension-twist coupling and centrifugal twisting. Torsional deformations severely impact aerodynamic performance. This paper presents a novel approach to assess different reasons for torsional deformations. A reduced-order model runs large parameter sweeps with algebraic formulations and numerical solution procedures. Generic beams represent three different propeller types for General Aviation, Commercial Aviation, and Advanced Air Mobility. Simulations include solid and hollow cross-sections made of aluminum, steel, and carbon fiber-reinforced polymer. The investigation shows that centrifugal twisting moments depend on both the elastic and initial twist. The determination of the centrifugal twisting moment solely based on the initial twist suffers from errors exceeding 5\% in some cases. The nonlinear parts of the torsional rigidity do not significantly impact the overall torsional rigidity for the investigated propeller types. The extension-twist coupling related to the initial and elastic twist in combination with tension forces significantly impacts the net cross-sectional torsional loads. While the increase in torsional stiffness due to initial twist contributes to the overall stiffness for General and Commercial Aviation propellers, its contribution to the lift propeller's stiffness is limited. The paper closes with the presentation of approximations for each effect identified as significant. Numerical evaluations are necessary to determine each effect for inhomogeneous cross-sections made of anisotropic material.},
  language  = {en}
}
@article{MuellerSeginWeigandetal.2022,
  author    = {Mueller, Tobias and Segin, Alexander and Weigand, Christoph and Schmitt, Robert H.},
  title     = {Feature selection for measurement models},
  series = {International journal of quality \& reliability management},
  journal   = {International journal of quality \& reliability management},
  number    = {Vol. ahead-of-print, No. ahead-of-print.},
  publisher = {Emerald Group Publishing Limited},
  address   = {Bingley},
  issn      = {0265-671X},
  doi       = {10.1108/IJQRM-07-2021-0245},
  year      = {2022},
  abstract  = {Purpose In the determination of the measurement uncertainty, the GUM procedure requires the building of a measurement model that establishes a functional relationship between the measurand and all influencing quantities. Since the effort of modelling as well as quantifying the measurement uncertainties depend on the number of influencing quantities considered, the aim of this study is to determine relevant influencing quantities and to remove irrelevant ones from the dataset. Design/methodology/approach In this work, it was investigated whether the effort of modelling for the determination of measurement uncertainty can be reduced by the use of feature selection (FS) methods. For this purpose, 9 different FS methods were tested on 16 artificial test datasets, whose properties (number of data points, number of features, complexity, features with low influence and redundant features) were varied via a design of experiments. Findings Based on a success metric, the stability, universality and complexity of the method, two FS methods could be identified that reliably identify relevant and irrelevant influencing quantities for a measurement model. Originality/value For the first time, FS methods were applied to datasets with properties of classical measurement processes. The simulation-based results serve as a basis for further research in the field of FS for measurement models. The identified algorithms will be applied to real measurement processes in the future.},
  language  = {en}
}
@article{Moosdorf2009,
  author    = {Moosdorf, Andreas},
  title     = {It's not just the Talent, it's the Knowledge Transfer Method},
  series = {GC Ticker},
  journal   = {GC Ticker},
  number    = {1},
  pages     = {16 -- 16},
  year      = {2009},
  language  = {en}
}
@book{Moosdorf2008,
  author    = {Moosdorf, Andreas},
  title     = {The determinants of international knowledge transfer effectiveness - conceptual advances and empirical verification},
  year      = {2008},
  language  = {en}
}
@article{Mischke2009,
  author    = {Mischke, Winfried},
  title     = {Kurzkommentierung der \S\S 433, 436, 446 - 453, 474 - 479 BGB},
  series = {LexisNexis : Elektronische Ressource / Recht (2009)},
  journal   = {LexisNexis : Elektronische Ressource / Recht (2009)},
  year      = {2009},
  language  = {en}
}
@article{Mischke1995,
  author    = {Mischke, Winfried},
  title     = {Die Garantie im Kaufrecht},
  series = {Betriebs-Berater. 50 (1995), H. 22},
  journal   = {Betriebs-Berater. 50 (1995), H. 22},
  isbn      = {0340-7918},
  pages     = {1093 -- 1096},
  year      = {1995},
  language  = {en}
}
@book{Maercker1995,
  author    = {Maercker, Gisela},
  title     = {Efficient estimation in AR models with ARCH errors},
  publisher = {Institute f{\"u}r Mathematik, Techn. Univ.},
  address   = {Braunschweig},
  pages     = {20 Bl.},
  year      = {1995},
  language  = {en}
}
@book{Maercker1997,
  author    = {Maercker, Gisela},
  title     = {Statistical inference in conditional heteroskedastic autoregressive models},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {3-8265-2486-1},
  pages     = {87 S.: graph. Darst.},
  year      = {1997},
  language  = {en}
}
@book{MackensteinMarsch2005,
  author    = {Mackenstein, Hans and Marsch, Steve},
  title     = {The international relations of the European Union / by Steve Marsh and Hans Mackenstein},
  publisher = {Pearson Education},
  address   = {Harlow [u.a.]},
  isbn      = {0-582-47293-8},
  pages     = {XX, 305 S.},
  year      = {2005},
  language  = {en}
}
@article{MackensteinJeffery1999,
  author    = {Mackenstein, Hans and Jeffery, Charlie},
  title     = {Financial equalization in the 1990s : on the road back to Karlsruhe / Hans Mackenstein and Charlie Jeffery},
  series = {Recasting German federalism : the legacies of unification},
  journal   = {Recasting German federalism : the legacies of unification},
  publisher = {Pinter},
  address   = {London},
  isbn      = {1-85567-579-x},
  pages     = {155 -- 176},
  year      = {1999},
  language  = {en}
}
@article{Mackenstein1998,
  author    = {Mackenstein, Hans},
  title     = {Book Reviews - Samardzic, Slobodan and Thomas Fleiner, Federalismus und Minderheitenproblem in Multiethnischen Gemeinschaften},
  series = {Regional and federal studies. 8 (1998), H. 3},
  journal   = {Regional and federal studies. 8 (1998), H. 3},
  isbn      = {1359-7566},
  pages     = {138 -- 138},
  year      = {1998},
  language  = {en}
}
@article{Mackenstein1998,
  author    = {Mackenstein, Hans},
  title     = {Book Reviews - Morass, Michael; Regionale Interessen auf dem Weg in die Europ{\"a}ische Union: Strukturelle Entwicklung und Perspektiven der Interessenvermittlung {\"O}sterreichischer und deutscher L{\"a}ndesakteure im Rahmen der Europ{\"a}ischen Integration},
  series = {Regional and federal studies. 8 (1998), H. 1},
  journal   = {Regional and federal studies. 8 (1998), H. 1},
  isbn      = {1359-7566},
  pages     = {227 -- 227},
  year      = {1998},
  language  = {en}
}
@book{Mackenstein1992,
  author    = {Mackenstein, Hans},
  title     = {The European system of central banks in relation to the Deutsche Bundesbank : a comparative study of the two institutions and their political and social environment / by Hans Wilhelm Mackenstein},
  address   = {Birmingham},
  pages     = {47 Bl.},
  year      = {1992},
  language  = {en}
}
@article{Mackenstein1991,
  author    = {Mackenstein, Hans},
  title     = {The role of Germany, Japan and the United States on the ECU-bond markets / Hans Wilhelm Mackenstein},
  series = {De pecunia. 3 (1991), H. 1},
  journal   = {De pecunia. 3 (1991), H. 1},
  isbn      = {1015-6283},
  pages     = {113 -- 150},
  year      = {1991},
  language  = {en}
}
@article{Mackenstein2000,
  author    = {Mackenstein, Hans},
  title     = {Books Reviewed - European Democratization since 1800 edited by J. Garrard, V. Tolz and R. White},
  series = {Democratization. 7 (2000), H. 4},
  journal   = {Democratization. 7 (2000), H. 4},
  isbn      = {1351-0347},
  pages     = {219 -- 219},
  year      = {2000},
  language  = {en}
}
@article{Mackenstein1999,
  author    = {Mackenstein, Hans},
  title     = {Book Reviews - Cowie, Harry, Private Partnership and Public Networks in Europe},
  series = {Regional and federal studies. 9 (1999), H. 2},
  journal   = {Regional and federal studies. 9 (1999), H. 2},
  isbn      = {1359-7566},
  pages     = {111 -- 111},
  year      = {1999},
  language  = {en}
}