@inproceedings{KreyerMuellerEsch2020,
  author    = {Kreyer, J{\"o}rg and M{\"u}ller, Marvin and Esch, Thomas},
  title     = {A Map-Based Model for the Determination of Fuel Consumption for Internal Combustion Engines as a Function of Flight Altitude},
  publisher = {DGLR},
  address   = {Bonn},
  doi       = {10.25967/490162},
  pages     = {13 Seiten},
  year      = {2020},
  abstract  = {In addition to very high safety and reliability requirements, the design of internal combustion engines (ICE) in aviation focuses on economic efficiency. The objective must be to design the aircraft powertrain optimized for a specific flight mission with respect to fuel consumption and specific engine power. Against this background, expert tools provide valuable decision-making assistance for the customer. In this paper, a mathematical calculation model for the fuel consumption of aircraft ICE is presented. This model enables the derivation of fuel consumption maps for different engine configurations. Depending on the flight conditions and based on these maps, the current and the integrated fuel consumption for freely definable flight emissions is calculated. For that purpose, an interpolation method is used, that has been optimized for accuracy and calculation time. The mission boundary conditions flight altitude and power requirement of the ICE form the basis for this calculation. The mathematical fuel consumption model is embedded in a parent program. This parent program presents the simulated fuel consumption by means of an example flight mission for a representative airplane. The focus of the work is therefore on reproducing exact consumption data for flight operations. By use of the empirical approaches according to Gagg-Farrar [1] the power and fuel consumption as a function of the flight altitude are determined. To substantiate this approaches, a 1-D ICE model based on the multi-physical simulation tool GT-Suite® has been created. This 1-D engine model offers the possibility to analyze the filling and gas change processes, the internal combustion as well as heat and friction losses for an ICE under altitude environmental conditions. Performance measurements on a dynamometer at sea level for a naturally aspirated ICE with a displacement of 1211 ccm used in an aviation aircraft has been done to validate the 1-D ICE model. To check the plausibility of the empirical approaches with respect to the fuel consumption and performance adjustment for the flight altitude an analysis of the ICE efficiency chain of the 1-D engine model is done. In addition, a comparison of literature and manufacturer data with the simulation results is presented.},
  language  = {en}
}
@inproceedings{KreyerEsch2017,
  author    = {Kreyer, J{\"o}rg and Esch, Thomas},
  title     = {Simulation Tool for Predictive Control Strategies for an ORCSystem in Heavy Duty Vehicles},
  series = {European GT Conference 2017},
  booktitle = {European GT Conference 2017},
  pages     = {16 Seiten},
  year      = {2017},
  abstract  = {Scientific questions - How can a non-stationary heat offering in the commercial vehicle be used to reduce fuel consumption? - Which potentials offer route and environmental information among with predicted speed and load trajectories to increase the efficiency of a ORC-System? Methods - Desktop bound holistic simulation model for a heavy duty truck incl. an ORC System - Prediction of massflows, temperatures and mixture quality (AFR) of exhaust gas},
  language  = {en}
}
@inproceedings{KreutzLoergenGraeweetal.2006,
  author    = {Kreutz, Christian and L{\"o}rgen, J{\"u}rgen and Graewe, Boris and Bargon, Joachim and Yoshida, Mayumi and Freso, Zachary M. and Fr{\`e}chet, Jean M. J.},
  title     = {High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:a96-opus-1445},
  year      = {2006},
  abstract  = {An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).},
  subject      = {Biosensor},
  language  = {en}
}
@inproceedings{KremersPieper2015,
  author    = {Kremers, Alexander and Pieper, Martin},
  title     = {Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software},
  series = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  booktitle = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  publisher = {COMSOL},
  address   = {G{\"o}ttingen ; Berlin},
  pages     = {6 Seiten},
  year      = {2015},
  language  = {en}
}
@article{KrebsbachSchillerBrunneretal.2006,
  author    = {Krebsbach, M. and Schiller, C. and Brunner, D. and G{\"u}nther, G. and Hegglin, M. I. and Mottaghy, Darius and Riese, M. and Spelten, N. and Wernli, H.},
  title     = {Seasonal cycles and variability of O_3 and H_2O in the UT/LMS during SPURT},
  series = {Atmospheric Chemistry and Physics},
  volume    = {6},
  journal   = {Atmospheric Chemistry and Physics},
  number    = {1},
  doi       = {10.5194/acp-6-109-2006},
  pages     = {109 -- 125},
  year      = {2006},
  language  = {en}
}
@article{KrauseSchuppeSaureetal.1988,
  author    = {Krause, Gregor and Schuppe, W.D. and Saure, M. and Andress, H.},
  title     = {Sensitive Analytical and Physical Methods for Diagnosis of Variations in Polyolefin Plaques and Cable Insulations / W.D. Schuppe, M. Saure, H. Andress, K. M{\"o}ller, D. Meurer, G. Krause},
  series = {Proceedings of the 32nd session : 28th August - 3rd September.},
  journal   = {Proceedings of the 32nd session : 28th August - 3rd September.},
  year      = {1988},
  language  = {en}
}
@article{KrauseRodriguezStopicetal.2007,
  author    = {Krause, Gregor and Rodriguez, Jackson and Stopic, Srecko and Friedrich, Bernd},
  title     = {Feasibility assessment of electrocoagulation towards a new sustainable wastewater treatment / Rodriguez, Jackson ; Stopic, Srecko ; Krause Gregor ; Friedrich, Bernd},
  series = {Environmental Science and Pollution Research. 14 (2007), H. 7},
  journal   = {Environmental Science and Pollution Research. 14 (2007), H. 7},
  isbn      = {0944-1344},
  pages     = {477 -- 482},
  year      = {2007},
  language  = {en}
}
@article{KrauseNeubertPietsch1990,
  author    = {Krause, Gregor and Neubert, R. and Pietsch, R.},
  title     = {Investigations of Electrical Aging in Polymers under High AC-Field Strength},
  series = {1990 annual report : October 28 - October 31, 1990 / sponsored by the IEEE Dielectrics and Electrical Insulation Society},
  journal   = {1990 annual report : October 28 - October 31, 1990 / sponsored by the IEEE Dielectrics and Electrical Insulation Society},
  publisher = {IEEE Service Center},
  address   = {Piscataway, N.J},
  pages     = {716 S : Ill., graph. Darst.},
  year      = {1990},
  language  = {en}
}
@article{KrauseMoellerMeurer1989,
  author    = {Krause, Gregor and M{\"o}ller, K. and Meurer, D.},
  title     = {Dielectric phenomena in semicrystalline polymers},
  series = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 2},
  journal   = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 2},
  pages     = {215 -- 222},
  year      = {1989},
  language  = {en}
}
@article{KrauseMeurerKlee1988,
  author    = {Krause, Gregor and Meurer, D. and Klee, D.},
  title     = {Space Charge Formation Related to the Morphology of Polymers},
  series = {ISE 6 : 6th International symposium on electrets : Papers},
  journal   = {ISE 6 : 6th International symposium on electrets : Papers},
  publisher = {IEEE},
  address   = {Piscataway, NY},
  pages     = {XIX, 688 S. : graph. Darst.},
  year      = {1988},
  language  = {en}
}
@article{KrauseMeurerKlee1989,
  author    = {Krause, Gregor and Meurer, D. and Klee, D.},
  title     = {Space charge formation related to the morphology of polymers},
  series = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 3},
  journal   = {IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 3},
  pages     = {215 -- 222},
  year      = {1989},
  language  = {en}
}
@article{KrauseGoettlichMoelleretal.1989,
  author    = {Krause, Gregor and G{\"o}ttlich, S. and M{\"o}ller, K. and Meurer, D.},
  title     = {Space Charge Phenomena in Partially Crystalline Polymers: On-Line Measurement of Charge Carrier Motion under High AC-Field Strength / G. Krause, S. G{\"o}ttlich, K. M{\"o}ller, D. Meurer},
  series = {Proceedings of the 3rd International Conference on Conduction and Breakdown in Solid Dielectrics : Trondheim, Norway ... 1989},
  journal   = {Proceedings of the 3rd International Conference on Conduction and Breakdown in Solid Dielectrics : Trondheim, Norway ... 1989},
  publisher = {IEEE},
  address   = {Piscataway, N.J.},
  pages     = {IX, 607 S.},
  year      = {1989},
  language  = {en}
}
@article{KrauseFruth1987,
  author    = {Krause, Gregor and Fruth, Bernhard},
  title     = {Dielectric Properties of Polyolefins Stressed by High Electrical Fields. Fruth, B. ; Krause, G.},
  year      = {1987},
  language  = {en}
}
@article{KrauseFruth1988,
  author    = {Krause, Gregor and Fruth, B.},
  title     = {Dielectric Properties of Polyolefins Stressed by High Electrical Fields / Fruth, B. ; Krause, G.},
  series = {Plenary lectures and contributions presented at the International Symposium on Polymer Materials : held in San Sebastian (Donostia), Spain, 31 August - 4 September, 1987 / symposium ed. G. M. Guzm{\´a}n ; A. Santamaria},
  journal   = {Plenary lectures and contributions presented at the International Symposium on Polymer Materials : held in San Sebastian (Donostia), Spain, 31 August - 4 September, 1987 / symposium ed. G. M. Guzm{\´a}n ; A. Santamaria},
  publisher = {Huethig \& Wepf},
  address   = {Basel},
  isbn      = {3-85739-220-7},
  pages     = {XIV, 629 S.},
  year      = {1988},
  language  = {en}
}
@article{Krause1991,
  author    = {Krause, Gregor},
  title     = {High Field Phenomena of Polymeric Insulation Investigated at PE Needle-Plane Specimen},
  series = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30, 1991 / Technische Universit{\"a}t Dresden},
  journal   = {Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30, 1991 / Technische Universit{\"a}t Dresden},
  publisher = {TU Dresden},
  address   = {Dresden},
  year      = {1991},
  language  = {en}
}
@inproceedings{KramerBragardRitzetal.2024,
  author    = {Kramer, Pia and Bragard, Michael and Ritz, Thomas and Ferfer, Ute and Schiffers, Tim},
  title     = {Visualizing, Enhancing and Predicting Students' Success through ECTS Monitoring},
  series = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  booktitle = {2024 IEEE Global Engineering Education Conference (EDUCON)},
  publisher = {IEEE},
  address   = {New York, NY},
  issn      = {2165-9559},
  doi       = {10.1109/EDUCON60312.2024.10578652},
  pages     = {5 Seiten},
  year      = {2024},
  abstract  = {This paper serves as an introduction to the ECTS monitoring system and its potential applications in higher education. It also emphasizes the potential for ECTS monitoring to become a proactive system, supporting students by predicting academic success and identifying groups of potential dropouts for tailored support services. The use of the nearest neighbor analysis is suggested for improving data analysis and prediction accuracy.},
  language  = {en}
}
@article{KramerValeroChansonetal.2019,
  author    = {Kramer, Matthias and Valero, Daniel and Chanson, Hubert and Bung, Daniel Bernhard},
  title     = {Towards reliable turbulence estimations with phase-detection probes: an adaptive window cross-correlation technique},
  series = {Experiments in Fluids},
  volume    = {60},
  journal   = {Experiments in Fluids},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-1114},
  doi       = {10.1007/s00348-018-2650-9},
  year      = {2019},
  language  = {en}
}
@article{KramerHalamkovaPoghossianetal.2013,
  author    = {Kramer, Friederike and Halamkova, Lenka and Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Katz, Evgeny and Halamek, Jan},
  title     = {Biocatalytic analysis of biomarkers for forensic identification of ethnicity between Caucasian and African American},
  series = {The analyst. August 2013},
  volume    = {Vol. 138},
  journal   = {The analyst. August 2013},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1364-5528 (E-Journal); 0003-2654 (Print)},
  pages     = {6251 -- 6257},
  year      = {2013},
  language  = {en}
}
@inproceedings{KraftWilhelms2005,
  author    = {Kraft, Bodo and Wilhelms, Nils},
  title     = {Visual Knowledge Specification for Conceptual Design},
  year      = {2005},
  abstract  = {Proc. of the 2005 ASCE Intl. Conf. on Computing in Civil Engineering (ICCC 2005) eds. L. Soibelman und F. Pena-Mora, Seite 1-14, ASCE (CD-ROM), Cancun, Mexico, 2005 Current CAD tools are not able to support the fundamental conceptual design phase, and none of them provides consistency analyses of sketches produced by architects. To give architects a greater support at the conceptual design phase, we develop a CAD tool for conceptual design and a knowledge specification tool allowing the definition of conceptually relevant knowledge. The knowledge is specific to one class of buildings and can be reused. Based on a dynamic knowledge model, different types of design rules formalize the knowledge in a graph-based realization. An expressive visual language provides a user-friendly, human readable representation. Finally, consistency analyses enable conceptual designs to be checked against this defined knowledge. In this paper we concentrate on the knowledge specification part of our project.},
  subject      = {CAD},
  language  = {en}
}
@inproceedings{KraftWilhelms2004,
  author    = {Kraft, Bodo and Wilhelms, N.},
  title     = {Interactive distributed knowledge support for conceptual building design},
  isbn      = {3-86068-213-X},
  year      = {2004},
  abstract  = {In: Net-distributed Co-operation : Xth International Conference on Computing in Civil and Building Engineering, Weimar, June 02 - 04, 2004 ; proceedings / [ed. by Karl Beuke ...] . - Weimar: Bauhaus-Univ. Weimar 2004. - 1. Aufl. . Seite 1-14 ISBN 3-86068-213-X International Conference on Computing in Civil and Building Engineering <10, 2004, Weimar> Summary In our project, we develop new tools for the conceptual design phase. During conceptual design, the coarse functionality and organization of a building is more important than a detailed worked out construction. We identify two roles, first the knowledge engineer who is responsible for knowledge definition and maintenance; second the architect who elaborates the conceptual de-sign. The tool for the knowledge engineer is based on graph technology, it is specified using PROGRES and the UPGRADE framework. The tools for the architect are integrated to the in-dustrial CAD tool ArchiCAD. Consistency between knowledge and conceptual design is en-sured by the constraint checker, another extension to ArchiCAD.},
  subject      = {CAD},
  language  = {en}
}