@incollection{GrossThulfautRenz2000, author = {Groß, Rolf Fritz and Thulfaut, Christian and Renz, Ulrich}, title = {On-Line Simulation mit LabView: Experimentelle und numerische Analyse homogener Gasphasenreaktionen aus Kraftwerksprozessen,}, series = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000}, booktitle = {Virtuelle Instrumente in der Praxis. Begleitband zum Kongress VIP 2000}, editor = {Jamal, Rahman and Jaschinski, Hans}, publisher = {H{\"u}thig}, address = {Heidelberg}, isbn = {3-7785-2789-4 (print)}, pages = {103 -- 108}, year = {2000}, abstract = {The institute of heat transfer and air conditioning at the Aachen University of Technology operates several test facilities in order to investigate homogeneous and catalytical processes for the reduction of gaseous pollutants (e.g. nitrous oxide) of flue gases in a tempeature range up to 900°C. One test facility consists of a stainless steel reactor in which the influence of reducing additives can be investigated. The software tool, created with LabVIEW 5.01, offers the possibility to measure, visualize and control all relevant physical quantities and to gain a numerical solution of the problem by solving the one dimensional, steady state conservation equations.}, language = {de} } @incollection{GrossMuellerHertingetal.1997, author = {Groß, Rolf Fritz and M{\"u}ller, D. and Herting, D. and Schneemann, A. and Renz, Ulrich}, title = {Modulare Messdatenerfassung in Forschung und Lehre}, series = {Virtuelle Instrumente in der Praxis : Begleitband zum Kongress VIP '97}, booktitle = {Virtuelle Instrumente in der Praxis : Begleitband zum Kongress VIP '97}, editor = {Rahman, Jamal and Jaschinski, Hans}, publisher = {H{\"u}thig}, address = {Heidelberg}, isbn = {978-3-7785-2667-5 Pp.}, pages = {282 -- 288}, year = {1997}, abstract = {The Lehrstuhl f{\"u}r W{\"a}rme{\"u}bertragung und Klimatechnik at the Aachen University of Technology operates several test facilities to investigate fundamentals of heat and mass transfer supported by the Deutsche Forschungsgemeinschaft, the Minister f{\"u}r Forschung und Technologie and the industry. In order to get high-resolution and reproselection of hardware components is as critical as the design of software routines to perform successful and accurate measurements. In the following the development of the measurement and control system for three different test facilities is presented and discussed. Special attention is given to the education of students within the framework of laboratories and scientific experiments.}, language = {de} } @incollection{GrossHeckenRenz1999, author = {Groß, Rolf Fritz and Hecken, M. and Renz, Ulrich}, title = {Hot gas filtration with ceramic filter candles: experimental and numerical investigations on fluid flow during element cleaning}, series = {High temperature gas cleaning. Vol. 2}, booktitle = {High temperature gas cleaning. Vol. 2}, editor = {Dittler, A. and Hemmer, G. and Kasper, G.}, publisher = {KIT Institut f{\"u}r Mechanische Verfahrenstechnik und Mechanik}, address = {Karlsruhe}, isbn = {3-9805220-1-6}, pages = {862 -- 873}, year = {1999}, abstract = {Ceramic hot gas filters are widely used in combined cycles based on pressurised fluidised beds. They fulfil most of the demands with respect to cleaning efficiency and long time durability, but their operation regarding the consumption of pulse gas and energy still has to be optimised. Experimental investigations were carried out to measure the flow field, the pressure and the gas temperature inside the filter candle during pulse jet cleaning. These results are compared with the results of a numerical procedure based on a solution of the two - dimensional conservation equations for momentum and energy. The observed difficulties handling different flow regimes like highly turbulent flow as well as Darcy flow simultaneously are discussed.}, language = {en} } @incollection{GonsiorHoffschmidt2008, author = {Gonsior, Daniel and Hoffschmidt, Bernhard}, title = {Innovative Rußfilter f{\"u}r LKW-Dieselmotoren (Innotrap)}, series = {Feinstaubforschung in Nordrhein-Westfalen. LANUV-Fachbericht. 9}, booktitle = {Feinstaubforschung in Nordrhein-Westfalen. LANUV-Fachbericht. 9}, publisher = {Landesamt f{\"u}r Natur, Umwelt und Verbraucherschutz Nordrhein-Westfalen}, address = {Recklinghausen}, isbn = {1864-3930}, pages = {13 -- 14}, year = {2008}, language = {de} } @incollection{GollandSchneidereit2018, author = {Golland, Alexander and Schneidereit, Peter}, title = {Rechtliche Rahmenbedingungen des Identit{\"a}tsmangements im Cloud Computing}, series = {Identit{\"a}tsmanagement Im Cloud Computing : Evaluation {\"o}konomischer und Rechtlicher Rahmenbedingungen}, booktitle = {Identit{\"a}tsmanagement Im Cloud Computing : Evaluation {\"o}konomischer und Rechtlicher Rahmenbedingungen}, editor = {Borges, Georg and Werners, Brigitte}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-55584-2}, doi = {10.1007/978-3-662-55584-2_4}, pages = {53 -- 104}, year = {2018}, abstract = {Cloud Computing wirft in zahlreichen Rechtsbereichen neuartige juristische Fragestellungen auf. Ziel der Darstellung der rechtlichen Rahmenbedingungen ist, die das Identit{\"a}tsmanagement in der Cloud betreffenden Rechtsgrundlagen aus den unterschiedlichen Rechtsgebieten vorzustellen und einzuordnen, bevor im Rahmen des sechsten Kapitels die Darstellung der hieraus resultierenden Verpflichtungen in ihrer konkreten Form erfolgt.}, language = {de} } @incollection{GollandOhrtmann2020, author = {Golland, Alexander and Ohrtmann, Jan-Peter}, title = {Video surveillance: The supervisory authorities' view andrecent case law}, series = {Turning Point in Data Protection Law}, booktitle = {Turning Point in Data Protection Law}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-8487-6909-4}, doi = {10.5771/9783748921561-175}, pages = {175 -- 178}, year = {2020}, language = {en} } @incollection{GollandBaumHammingeretal.2018, author = {Golland, Alexander and Baum, Michael and Hamminger, Alexander and Olbertz, Klaus}, title = {Ein {\"U}berblick: Umsetzung der Datenschutz-Grundverordnung}, series = {Das neue Datenschutzrecht in der Praxis des Steuerberaters Beitragssammlung}, booktitle = {Das neue Datenschutzrecht in der Praxis des Steuerberaters Beitragssammlung}, publisher = {NWB Verlag}, address = {Herne}, isbn = {978-3-482-67271-2}, pages = {8 -- 14}, year = {2018}, abstract = {Datenschutz und der 25.5.2018, wie ein Damoklesschwert scheinen beide Begriffe zurzeit im Raum zu stehe. Jeder weiß oder sollte zumindest um das Inkrafttreten der europ{\"a}ischen DSGVO am 25.5.2018 wissen. Viel wurde {\"u}ber wesentliche Neuerungen im Datenschutzrecht berichtet. Nicht zuletzt {\"u}ber gesteigerte organisatorische Anforderungen, Dokumentationspflichten und drohende Bußgelder. Doch was bedeuten diese Neuerungen ganz konkret f{\"u}r die Praxis des Steuerberaters? Anders als man vermuten k{\"o}nnte, werden die datenschutzrechtlichen Neuerungen nicht nur im Bereich der Kanzleiorganisation relevant. Auch im Steuerverwaltungsverfahren sieht sich der Steuerberater datenschutzrechtlichen Fragestellungen gegen{\"u}ber, bspw. dann, wenn die Finanzbeh{\"o}rden bei der Verarbeitung der personenbezogenen Daten des Mandanten gegen die DSGVO verstoßen. Gleiches gilt in Bereichen des Besch{\"a}ftigtendatenschutzes. Sowohl der Kanzleiinhaber selbst, als auch seine Arbeitgeber-Mandanten haben die Vorschriften des Besch{\"a}ftigtendatenschutzes einzuhalten. Der Steuerberater ben{\"o}tigt datenschutzrechtliches Know How, welches unmittelbar seine t{\"a}gliche Praxis betrifft. Andernfalls besteht das Risiko, dass dieser mit mehr Fragen, als Antworten zur{\"u}ck bleibt.}, language = {de} } @incollection{Golland2022, author = {Golland, Alexander}, title = {Kommentierung von Artikel 94 bis 99 Datenschutz-Grundverordnung}, series = {DSGVO - BDSG - TTDSG: Datenschutzgrundverordnung - Bundesdatenschutzgesetz - Telekommunikation-Telemedien-Datenschutzgesetz}, booktitle = {DSGVO - BDSG - TTDSG: Datenschutzgrundverordnung - Bundesdatenschutzgesetz - Telekommunikation-Telemedien-Datenschutzgesetz}, editor = {Taeger, J{\"u}rgen and Gabel, Detlev}, edition = {4., neu bearbeitete Auflage. 2022}, publisher = {Fachmedien Recht und Wirtschaft}, address = {Frankfurt am Main}, isbn = {978-3-8005-1760-2}, pages = {1575 -- 1621}, year = {2022}, abstract = {Das Werk kommentiert leicht verst{\"a}ndlich, aktuell und praxisnah die DSGVO sowie das BDSG und - neu - auch das TTDSG (Telekommunikation-Telemedien-Datenschutzgesetz). Verantwortliche erhalten damit eine umfassende Darstellung mit Handlungsempfehlungen zum gesamten neuen Datenschutzrecht. Betriebliche Datenschutzbeauftragte k{\"o}nnen sich an den fundierten Kommentierungen orientieren, in denen Literatur und Rechtsprechung aktuell ber{\"u}cksichtigt wurden.}, language = {de} } @incollection{Golland2019, author = {Golland, Alexander}, title = {Kommentierung von Artikel 94 bis 99 Datenschutz-Grundverordnung}, series = {DSGVO-BDSG}, booktitle = {DSGVO-BDSG}, editor = {Taeger, J{\"u}rgen and Gabel, Detlev}, edition = {3., v{\"o}llig neue bearbeitete und wesentlich erweiterte Auflage}, publisher = {Fachmedien Recht und Wirtschaft}, address = {Frankfurt am Main}, isbn = {978-3-8005-1659-9}, year = {2019}, abstract = {Das Werk kommentiert leicht verst{\"a}ndlich, aktuell und praxisnah die DSGVO wie auch das neue BDSG. Datenverarbeiter erhalten damit eine umfassende Darstellung mit Handlungsempfehlungen zum gesamten neuen Datenschutzrecht.}, language = {de} } @incollection{Golland2020, author = {Golland, Alexander}, title = {Struggling with users' consent: Economic approach to solve the issue of coupling}, series = {Turning Point in Data Protection Law}, booktitle = {Turning Point in Data Protection Law}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-8487-6909-4}, doi = {10.5771/9783748921561-121}, pages = {121 -- 126}, year = {2020}, language = {en} } @incollection{GoldbachHochrein2011, author = {Goldbach, Daniel and Hochrein, Ulrich}, title = {Functional Safety Management und Analysemethoden in der Entwicklung eines sicherheitskritischen Systems im Automobil}, series = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]}, booktitle = {Diagnose in mechatronischen Fahrzeugsystemen IV : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : [anl{\"a}sslich der 5. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen"]}, publisher = {Expert Verlag}, address = {Renningen}, isbn = {978-3-8169-3068-6}, pages = {175 -- 194}, year = {2011}, language = {de} } @incollection{Goldbach2013, author = {Goldbach, Daniel}, title = {Diagnosemaßnahmen in der funktionalen Sicherheit}, series = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)}, booktitle = {Diagnose in mechatronischen Fahrzeugsystemen, VI : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz : 7. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen". Bernhard B{\"a}ker ... (Hrsg.)}, publisher = {Expert Verlag}, address = {Renningen}, isbn = {978-3-8169-3221-5}, pages = {179 -- 198}, year = {2013}, language = {de} } @incollection{Goldbach2012, author = {Goldbach, Daniel}, title = {Zuverl{\"a}ssigkeitsanalyse zur Verifikation der Einhaltung von quantitativen Sicherheitsanforderungen.}, series = {Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz ; [anl{\"a}sslich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard B{\"a}ker ... (Hrsg.)}, booktitle = {Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren f{\"u}r Test, Pr{\"u}fung und Diagnose von E/E-Systemen im Kfz ; [anl{\"a}sslich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard B{\"a}ker ... (Hrsg.)}, publisher = {Expert Verlag}, address = {Renningen}, isbn = {978-3-8169-3149-2}, pages = {116 -- 132}, year = {2012}, language = {de} } @incollection{GohTopcuMadabhushietal.2023, author = {Goh, Kheng Lim and Top{\c{c}}u, Murat and Madabhushi, Gopal S. P. and Staat, Manfred}, title = {Collagen fibril reinforcement in connective tissue extracellular matrices}, series = {Handbook of the extracellular matrix}, booktitle = {Handbook of the extracellular matrix}, editor = {Maia, Fatima Raquel Azevedo and Miguel Oliveira, J. and Reis, Rui L.}, publisher = {Springer Nature}, address = {Cham}, isbn = {978-3-030-92090-6 (Print)}, doi = {10.1007/978-3-030-92090-6_6-1}, pages = {1 -- 20}, year = {2023}, abstract = {The connective tissues such as tendons contain an extracellular matrix (ECM) comprising collagen fibrils scattered within the ground substance. These fibrils are instrumental in lending mechanical stability to tissues. Unfortunately, our understanding of how collagen fibrils reinforce the ECM remains limited, with no direct experimental evidence substantiating current theories. Earlier theoretical studies on collagen fibril reinforcement in the ECM have relied predominantly on the assumption of uniform cylindrical fibers, which is inadequate for modelling collagen fibrils, which possessed tapered ends. Recently, Top{\c{c}}u and colleagues published a paper in the International Journal of Solids and Structures, presenting a generalized shear-lag theory for the transfer of elastic stress between the matrix and fibers with tapered ends. This paper is a positive step towards comprehending the mechanics of the ECM and makes a valuable contribution to formulating a complete theory of collagen fibril reinforcement in the ECM.}, language = {en} } @incollection{GoeckelSchifferWagneretal.2015, author = {Goeckel, Tom and Schiffer, Stefan and Wagner, Hermann and Lakemeyer, Gerhard}, title = {The Video Conference Tool Robot ViCToR}, series = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II}, booktitle = {Intelligent Robotics and Applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II}, publisher = {Springer}, isbn = {978-3-319-22876-1}, doi = {10.1007/978-3-319-22876-1_6}, pages = {61 -- 73}, year = {2015}, abstract = {We present a robotic tool that autonomously follows a conversation to enable remote presence in video conferencing. When humans participate in a meeting with the help of video conferencing tools, it is crucial that they are able to follow the conversation both with acoustic and visual input. To this end, we design and implement a video conferencing tool robot that uses binaural sound source localization as its main source to autonomously orient towards the currently talking speaker. To increase robustness of the acoustic cue against noise we supplement the sound localization with a source detection stage. Also, we include a simple onset detector to retain fast response times. Since we only use two microphones, we are confronted with ambiguities on whether a source is in front or behind the device. We resolve these ambiguities with the help of face detection and additional moves. We tailor the system to our target scenarios in experiments with a four minute scripted conversation. In these experiments we evaluate the influence of different system settings on the responsiveness and accuracy of the device.}, language = {en} } @incollection{GligorevicEppleSchnell2011, author = {Gligorevic, Snjezana and Epple, Ulrich and Schnell, Michael}, title = {The LDACS1 physical layer design}, series = {Future aeronautical communications}, booktitle = {Future aeronautical communications}, publisher = {Intech}, address = {London}, isbn = {978-953-307-625-6}, pages = {317 -- 332}, year = {2011}, language = {en} } @incollection{GkatzogiasVeljkovivPohorylesetal.2022, author = {Gkatzogias, Konstantinos and Veljkoviv, Ana and Pohoryles, Daniel A. and Tsionis, Georgios and Bournas, Dionysios A. and Crowley, Helen and Norl{\´e}n, Hedvig and Butenweg, Christoph and Gervasio, Helena and Manfredi, Vincenzo and Masi, Angelo and Zaharieva, Roumiana}, title = {Policy practice and regional impact assessment for building renovation}, series = {REEBUILD Integrated Techniques for the Seismic Strengthening \& Energy Efficiency of Existing Buildings}, booktitle = {REEBUILD Integrated Techniques for the Seismic Strengthening \& Energy Efficiency of Existing Buildings}, editor = {Gkatzogias, Konstantinos and Tsionis, Georgios}, publisher = {Publications Office of the European Union}, address = {Luxembourg}, isbn = {978-92-76-60454-9}, issn = {1831-9424}, doi = {10.2760/883122}, pages = {1 -- 68}, year = {2022}, abstract = {The work presented in this report provides scientific support to building renovation policies in the EU by promoting a holistic point of view on the topic. Integrated renovation can be seen as a nexus between European policies on disaster resilience, energy efficiency and circularity in the building sector. An overview of policy measures for the seismic and energy upgrading of buildings across EU Member States identified only a few available measures for combined upgrading. Regulatory framework, financial instruments and digital tools similar to those for energy renovation, together with awareness and training may promote integrated renovation. A framework for regional prioritisation of building renovation was put forward, considering seismic risk, energy efficiency, and socioeconomic vulnerability independently and in an integrated way. Results indicate that prioritisation of building renovation is a multidimensional problem. Depending on priorities, different integrated indicators should be used to inform policies and accomplish the highest relative or most spread impact across different sectors. The framework was further extended to assess the impact of renovation scenarios across the EU with a focus on priority regions. Integrated renovation can provide a risk-proofed, sustainable, and inclusive built environment, presenting an economic benefit in the order of magnitude of the highest benefit among the separate interventions. Furthermore, it presents the unique capability of reducing fatalities and energy consumption at the same time and, depending on the scenario, to a greater extent.}, language = {en} } @incollection{GitterHornhardtKoewiusetal.2003, author = {Gitter, R. and Hornhardt, Ch. and Koewius, A. and [u.a.], and Wahle, Michael}, title = {Konstruieren mit Aluminium [Kapitel 4]}, series = {Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale D{\"u}sseldorf. - Bd. 3: Weiterverarbeitung und Anwendung}, booktitle = {Aluminium-Taschenbuch / Hrsg.: Aluminium-Zentrale D{\"u}sseldorf. - Bd. 3: Weiterverarbeitung und Anwendung}, edition = {16. Auflage}, publisher = {Aluminium-Verlag}, address = {D{\"u}sseldorf}, isbn = {3-87017-275-4}, pages = {355 -- 599}, year = {2003}, language = {de} } @incollection{GiresiniButenweg2019, author = {Giresini, Linda and Butenweg, Christoph}, title = {Earthquake resistant design of structures according to Eurocode 8}, series = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, booktitle = {Structural Dynamics with Applications in Earthquake and Wind Engineering}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-662-57550-5 (Online)}, doi = {10.1007/978-3-662-57550-5_4}, pages = {197 -- 358}, year = {2019}, abstract = {The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.}, language = {en} } @incollection{GidomPietsch1991, author = {Gidom, D. and Pietsch, Wolfram}, title = {Integrierte Steuerung von Bauprojekten durch Expertensysteme}, series = {Dortmunder Expertensystemtage '91 : in Verbindung mit dem 3. Anwenderforum des KI-Verbundes NRW}, booktitle = {Dortmunder Expertensystemtage '91 : in Verbindung mit dem 3. Anwenderforum des KI-Verbundes NRW}, publisher = {T{\"U}V Rheinland}, address = {K{\"o}ln}, isbn = {3-88585-998-X}, pages = {356 -- 365}, year = {1991}, language = {de} }