@book{Engelmann2022,
  author    = {Engelmann, Ulrich M.},
  title     = {Zielf{\"u}hrend moderieren},
  publisher = {UVK Verlag},
  address   = {Stuttgart},
  isbn      = {9783838556895},
  doi       = {10.36198/9783838556895},
  pages     = {438 S.},
  year      = {2022},
  abstract  = {In der Teamarbeit wird Moderation zum Erfolgsfaktor, der jedoch h{\"a}ufig untersch{\"a}tzt wird. Ausgehend vom pers{\"o}nlichen Kompetenzniveau verkn{\"u}pft dieses Buch Grundlagen und Methoden zu Wegen, um Ihre pers{\"o}nliche Entwicklung individuell zu begleiten: Neulinge finden hilfreiche Checklisten und Basistechniken f{\"u}r ihre ersten Moderationen, Fortgeschrittene wertvolle Praxistipps und Methoden f{\"u}r den Ausbau ihrer Moderationskompetenz. Profis schließlich genießen eine raffinierte Aussicht auf weniger bekannte Techniken und neue Anwendungen. Weiterf{\"u}hrende Exkurse zum Meeting-Management und zur Online-Moderation runden den Anwendungshorizont ab. Ob in Beruf, Studium oder Ehrenamt - derart ausgestattet gelingen Ihre eigene sowie die Entwicklung Ihres Teams durch zielf{\"u}hrende Moderationen.},
  language  = {de}
}
@incollection{Engelmann2023,
  author    = {Engelmann, Ulrich M.},
  title     = {Moderationsexpertise - Onlinemoderation},
  series = {IT-Servicemanagement},
  booktitle = {IT-Servicemanagement},
  editor    = {Lindinger, Markus and Bartsch, Oliver},
  publisher = {T{\"U}V-Verlag},
  address   = {K{\"o}ln},
  isbn      = {978-3-8249-1154-7},
  pages     = {Kapitel 05532},
  year      = {2023},
  abstract  = {Damit Sie auch in den immer h{\"a}ufiger werdenden Onlineveranstaltungen als Moderator gut bestehen, sollten Sie wissen, was bei der Onlinemoderation im Besonderen zu beachten ist. In diesem dritten Teil der Beitragsserie erfahren Sie, warum online anders als offline ist. Die technischen M{\"o}glichkeiten werden vorgestellt und auch wie diese zu nutzen sind. Schließlich erhalten Sie Tipps, die Sie beim Sprechen online beachten sollten.},
  language  = {de}
}
@inproceedings{EngelThieringerTippkoetter2016,
  author    = {Engel, Mareike and Thieringer, Julia and Tippk{\"o}tter, Nils},
  title     = {Linking bioprocess engineering and electrochemistry for sustainable biofuel production},
  series = {Young Researchers Symposium, YRS 2016. Proceedings},
  booktitle = {Young Researchers Symposium, YRS 2016. Proceedings},
  publisher = {Fraunhofer Verlag},
  address   = {Karlsruhe},
  pages     = {49 -- 53},
  year      = {2016},
  abstract  = {Electromicrobial engineering is an emerging, highly interdisciplinary research area linking bioprocesses with electrochemistry. In this work, microbial electrosynthesis (MES) of biobutanol is carried out during acetone-butanol-ethanol (ABE) fermentations with Clostridium acetobutylicum. A constant electric potential of -600mV (vs. Ag/AgCl) with simultaneous addition of the soluble redox mediator neutral red is used in order to study the electron transfer between the working electrode and the bacterial cells. The results show an earlier initiation of solvent production for all fermentations with applied potential compared to the conventional ABE fermentation. The f inal butanol concentration can be more than doubled by the application of a negative potential combined with addition of neutral red. Moreover a higher biofilm formation on the working electrode compared to control cultivations has been observed. In contrast to previous studies, our results also indicate that direct electron transfer (DET) might be possible with C. acetobutylicum. The presented results make microbial butanol production economically attractive and therefore support the development of sustainable production processes in the chemical industry aspired by the "Centre for resource-efficient chemistry and raw material change" as well as the the project "NanoKat" working on nanostructured catalysts in Kaiserslautern.},
  language  = {en}
}
@article{EngelHoltmannUlberetal.2018,
  author    = {Engel, Mareike and Holtmann, Dirk and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Increased Biobutanol Production by Mediator-Less Electro-Fermentation},
  series = {Biotechnology Journal},
  volume    = {14},
  journal   = {Biotechnology Journal},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1860-7314},
  doi       = {10.1002/biot.201800514},
  year      = {2018},
  abstract  = {A future bio-economy should not only be based on renewable raw materials but also in the raise of carbon yields of existing production routes. Microbial electrochemical technologies are gaining increased attention for this purpose. In this study, the electro-fermentative production of biobutanol with C. acetobutylicum without the use of exogenous mediators is investigated regarding the medium composition and the reactor design. It is shown that the use of an optimized synthetic culture medium allows higher product concentrations, increased biofilm formation, and higher conductivities compared to a synthetic medium supplemented with yeast extract. Moreover, the optimization of the reactor system results in a doubling of the maximum product concentrations for fermentation products. When a working electrode is polarized at -600 mV vs. Ag/AgCl, a shift from butyrate to acetone and butanol production is induced. This leads to an increased final solvent yield of Yᴀᴃᴇ = 0.202 gg⁻¹ (control 0.103 gg⁻¹), which is also reflected in a higher carbon efficiency of 37.6\% compared to 23.3\% (control) as well as a fourfold decrease in simplified E-factor to 0.43. The results are promising for further development of biobutanol production in bioelectrochemical systems in order to fulfil the principles of Green Chemistry.},
  language  = {en}
}
@article{EngelGemuendeHoltmannetal.2019,
  author    = {Engel, Mareike and Gem{\"u}nde, Andre and Holtmann, Dirk and M{\"u}ller-Renno, Christine and Ziegler, Christiane and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Clostridium acetobutylicum's connecting world: cell appendage formation in bioelectrochemical systems},
  series = {ChemElectroChem},
  volume    = {7},
  journal   = {ChemElectroChem},
  number    = {2},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {2196-0216},
  doi       = {10.1002/celc.201901656},
  pages     = {414 -- 420},
  year      = {2019},
  abstract  = {Bacterial cell appendix formation supports cell-cell interaction, cell adhesion and cell movement. Additionally, in bioelectrochemical systems (BES), cell appendages have been shown to participate in extracellular electron transfer. In this work, the cell appendix formation of Clostridium acetobutylicum in biofilms of a BES are imaged and compared with conventional biofilms. Under all observed conditions, the cells possess filamentous appendages with a higher number and density in the BES. Differences in the amount of extracellular polymeric substance in the biofilms of the electrodes lead to the conclusion that the cathode can be used as electron donor and the anode as electron acceptor by C. acetobutylicum. When using conductive atomic force microscopy, a current response of about 15 nA is found for the cell appendages from the BES. This is the first report of conductivity for clostridial cell appendices and represents the basis for further studies on their role for biofilm formation and electron transfer.},
  language  = {en}
}
@article{EngelBayerHoltmannetal.2019,
  author    = {Engel, Mareike and Bayer, Hendrik and Holtmann, Dirk and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Flavin secretion of Clostridium acetobutylicum in a bioelectrochemical system - Is an iron limitation involved?},
  series = {Bioelectrochemistry},
  journal   = {Bioelectrochemistry},
  number    = {In Press, Accepted Manuscript},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1567-5394},
  doi       = {10.1016/j.bioelechem.2019.05.014},
  year      = {2019},
  language  = {en}
}
@misc{EngelTippkoetter2016,
  author    = {Engel, M. and Tippk{\"o}tter, Nils},
  title     = {Einfluss eines Phenazin-Mediators und elektrischen Potenzials auf die Aceton-Butanol-Ethanol-Fermentation},
  series = {Chemie Ingenieur Technik},
  volume    = {88},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201650105},
  pages     = {1254},
  year      = {2016},
  abstract  = {In den letzten Jahren haben nachhaltige, biotechnologische Prozesse zunehmend an Bedeutung gewonnen. Die Aceton-Butanol-Ethanol-Fermentation (ABE-Fermentation) mit dem anaeroben Bakterium Clostridium acetobutylicum zur Gewinnung von Biobutanol k{\"o}nnte in diesem Zusammenhang eine M{\"o}glichkeit der nachhaltigen Kraftstoffproduktion darstellen. In dieser Arbeit wird der Einfluss zus{\"a}tzlich verf{\"u}gbarer Elektronen durch den Einsatz des Phenazin-Farbstoffs Neutralrot als Redoxmediator sowie das Anlegen eines elektrischen Potenzials w{\"a}hrend der ABE-Fermentation untersucht. Es wird gezeigt, dass das Neutralrot keinen Einfluss auf die Leerlaufspannung von ca. 500 mV vs. Ag/AgCl w{\"a}hrend der Fermentation hat. Der Mediator bewirkt allerdings eine fr{\"u}here Butanolbildung sowie h{\"o}here Butanolkonzentrationen. Wird zudem die Mediatorkonzentration von 125 mM auf 250 mM angehoben, wird dabei auch die maximale Butanolkonzentration um 36 \% ± 1,8 \% innerhalb von28 Stunden gesteigert.},
  language  = {de}
}
@inproceedings{EngelThieringerTippkoetter2016,
  author    = {Engel, M. and Thieringer, J. and Tippk{\"o}tter, Nils},
  title     = {Microbial electrosynthesis for sustainable biobutanol production},
  series = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  booktitle = {New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany},
  publisher = {DECHEMA},
  address   = {Frankfurt am Main},
  pages     = {77 -- 78},
  year      = {2016},
  language  = {en}
}
@misc{EngelBayerUlberetal.2018,
  author    = {Engel, M. and Bayer, H. and Ulber, Roland and Tippk{\"o}tter, Nils},
  title     = {Kommt es in Elektrofermentationen mit Clostridium acetobutylicum zu einer Eisenlimitierung?},
  series = {Chemie Ingenieur Technik},
  volume    = {90},
  journal   = {Chemie Ingenieur Technik},
  number    = {9},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0009-286X},
  doi       = {10.1002/cite.201855047},
  pages     = {1154},
  year      = {2018},
  abstract  = {Das strikt anaerobe Bakterium Clostridium acetobutylicum bildet die L{\"o}semittel Aceton, Butanol und Ethanol (ABE-Fermentation). Im Fall einer Eisenlimitierung kommt es zus{\"a}tzlich zu einer Riboflavinsekretion (RF), was durch die gelbe F{\"a}rbung des Kultur{\"u}berstands erkennbar ist. In dieser Arbeit wurde beobachtet, dass w{\"a}hrend Elektrofermentationen mit C. acetobutylicum bei -600 mV eine gelbe F{\"a}rbung auftritt. Es wurde deshalb untersucht, ob eine Eisenlimitierung im bio-elektrochemischen System (BES) vorliegt. Hierzu wurden die Flavinspezien bei Kultivierungen in Medien mit einer Eisenlimitierung bzw. mit ausreichend Eisen in Serumflaschen sowie im BES mit und ohne angelegtem Potenzial verglichen. In den Serumflaschenversuchen wurden RF und Flavinadenindinukleotid (FAD)-Konzentrationen von ‡ 20 mg L⁻¹ sowie Flavinmononukleotid (FMN)-Konzentrationen von ca. 5 mg L⁻¹ detektiert. Bei ausreichender Eisenverf{\"u}gbarkeit hingegen wurden in den Serumflaschen fast keine Flavine sekretiert. Im BES bei -600 mV hingegen wurde auch in diesen Kultur{\"u}berst{\"a}nden FMN und FAD (1-5 mg L⁻¹ ),jedoch kein RF gemessen. Diese Ergebnisse zeigen, dass die Flavinbildung im BES mit angelegtem Potenzial nicht mit der Flavinbildung unter Eisenlimitierung in Serumflaschen korreliert. Andere Faktoren f{\"u}r eine m{\"o}gliche Flavinbildung werden aktuell n{\"a}her betrachtet.},
  language  = {de}
}
@inproceedings{EndressBragard2017,
  author    = {Endress, Tim and Bragard, Michael},
  title     = {Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench},
  series = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  booktitle = {2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-5386-3846-0},
  doi       = {10.1109/RTUCON.2017.8124775},
  pages     = {5 Seiten},
  year      = {2017},
  abstract  = {This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.},
  language  = {en}
}
@article{EmonsHuellenkremerSchoening2001,
  author    = {Emons, H. and H{\"u}llenkremer, B. and Sch{\"o}ning, Michael Josef},
  title     = {Detection of metal ions in aqueous solutions by voltohmmetry},
  series = {Fresenius' Journal of Analytical Chemistry. 369 (2001), H. 1},
  journal   = {Fresenius' Journal of Analytical Chemistry. 369 (2001), H. 1},
  isbn      = {0937-0633},
  pages     = {42 -- 46},
  year      = {2001},
  language  = {en}
}
@article{EmonsGlueckSchoening2001,
  author    = {Emons, H. and Gl{\"u}ck, O. and Sch{\"o}ning, Michael Josef},
  title     = {Voltohmmetry - An alternative detection principle at ultrathin metal electrodes in solution},
  series = {Chemical and biological sensors and analytical methods : proceedings of the international symposium / Sensor, Physical Electrochemistry, and Organic and Biological Electrochemistry Divisions. Ed.: M. Butler},
  journal   = {Chemical and biological sensors and analytical methods : proceedings of the international symposium / Sensor, Physical Electrochemistry, and Organic and Biological Electrochemistry Divisions. Ed.: M. Butler},
  publisher = {Electrochemical Society},
  address   = {Pennington, NJ},
  isbn      = {1-56677-351-2},
  pages     = {1 -- 3},
  year      = {2001},
  language  = {en}
}
@article{EmonsGlueckHuellenkremeretal.2001,
  author    = {Emons, H. and Gl{\"u}ck, O. and H{\"u}llenkremer, B. and Sch{\"o}ning, Michael Josef},
  title     = {Voltohmmetry as an alternative detection method at polycrystalline metal film electrodes},
  series = {Electroanalysis. 13 (2001), H. 8-9},
  journal   = {Electroanalysis. 13 (2001), H. 8-9},
  isbn      = {1040-0397},
  pages     = {677 -- 680},
  year      = {2001},
  language  = {en}
}
@article{EmonsBaadeSchoening2000,
  author    = {Emons, H. and Baade, A. and Sch{\"o}ning, Michael Josef},
  title     = {Voltammetric determination of heavy metals in microvolumes of rain water},
  series = {Electroanalysis. 12 (2000), H. 15},
  journal   = {Electroanalysis. 12 (2000), H. 15},
  isbn      = {1040-0397},
  pages     = {1171 -- 1176},
  year      = {2000},
  language  = {en}
}
@article{EmigHebelSchwark2022,
  author    = {Emig, J. and Hebel, Christoph and Schwark, A.},
  title     = {Einsatzbereiche f{\"u}r Verkehrsnachfragemodelle},
  series = {Straßenverkehrstechnik},
  volume    = {66},
  journal   = {Straßenverkehrstechnik},
  number    = {10},
  publisher = {Kirschbaum Verlag GmbH},
  address   = {Bonn},
  issn      = {0039-2219},
  doi       = {10.53184/SVT10-2022-2},
  pages     = {727 -- 736},
  year      = {2022},
  abstract  = {In der Praxis bestehen vielf{\"a}ltige Einsatzbereiche f{\"u}r Verkehrsnachfragemodelle. Mit ihnen k{\"o}nnen Kenngr{\"o}ßen des Verkehrsangebots und der Verkehrsnachfrage f{\"u}r den heutigen Zustand wie auch f{\"u}r zuk{\"u}nftige Zust{\"a}nde bereitgestellt werden, um so die Grundlagen f{\"u}r verkehrsplanerische Entscheidungen zu liefern. Die neuen „Empfehlungen zum Einsatz von Verkehrsnachfragemodellen f{\"u}r den Personenverkehr" (EVNM-PV) (FGSV 2022) veranschaulichen anhand von typischen Planungsaufgaben, welche differenzierten Anforderungen daraus f{\"u}r die Modellkonzeption und -erstellung resultieren. Vor dem Hintergrund der konkreten Aufgabenstellung sowie deren spezifischer planerischer Anforderungen bildet die abzuleitende Modellspezifikation die verabredete Grundlage zwischen Auftraggeber und Modellersteller f{\"u}r die konkrete inhaltliche, fachliche Ausgestaltung des Verkehrsmodells.},
  language  = {de}
}
@article{EmhardtJarodzkaBrandGruweletal.2022,
  author    = {Emhardt, Selina N. and Jarodzka, Halszka and Brand-Gruwel, Saskia and Drumm, Christian and Niehorster, Diederick C. and van Gog, Tamara},
  title     = {What is my teacher talking about? Effects of displaying the teacher's gaze and mouse cursor cues in video lectures on students' learning},
  series = {Journal of Cognitive Psychology},
  journal   = {Journal of Cognitive Psychology},
  publisher = {Routledge, Taylor \& Francis Group},
  address   = {Abingdon},
  issn      = {2044-5911},
  doi       = {10.1080/20445911.2022.2080831},
  pages     = {1 -- 19},
  year      = {2022},
  abstract  = {Eye movement modelling examples (EMME) are instructional videos that display a teacher's eye movements as "gaze cursor" (e.g. a moving dot) superimposed on the learning task. This study investigated if previous findings on the beneficial effects of EMME would extend to online lecture videos and compared the effects of displaying the teacher's gaze cursor with displaying the more traditional mouse cursor as a tool to guide learners' attention. Novices (N = 124) studied a pre-recorded video lecture on how to model business processes in a 2 (mouse cursor absent/present) × 2 (gaze cursor absent/present) between-subjects design. Unexpectedly, we did not find significant effects of the presence of gaze or mouse cursors on mental effort and learning. However, participants who watched videos with the gaze cursor found it easier to follow the teacher. Overall, participants responded positively to the gaze cursor, especially when the mouse cursor was not displayed in the video.},
  language  = {en}
}
@article{EmhardtJarodzkaBrandGruweletal.2020,
  author    = {Emhardt, Selina and Jarodzka, Halszka and Brand-Gruwel, Saskia and Drumm, Christian and Gog, Tamara van},
  title     = {Introducing eye movement modeling examples for programming education and the role of teacher's didactic guidance},
  series = {ETRA '20 Short Papers: ACM Symposium on Eye Tracking Research and Applications},
  journal   = {ETRA '20 Short Papers: ACM Symposium on Eye Tracking Research and Applications},
  number    = {Art. 52},
  publisher = {ACM},
  address   = {New York},
  doi       = {10.1145/3379156.3391978},
  pages     = {1 -- 4},
  year      = {2020},
  abstract  = {In this article, we introduce how eye-tracking technology might become a promising tool to teach programming skills, such as debugging with 'Eye Movement Modeling Examples' (EMME). EMME are tutorial videos that visualize an expert's (e.g., a programming teacher's) eye movements during task performance to guide students' attention, e.g., as a moving dot or circle. We first introduce the general idea behind the EMME method and present studies that showed first promising results regarding the benefits of EMME to support programming education. However, we argue that the instructional design of EMME varies notably across them, as evidence-based guidelines on how to create effective EMME are often lacking. As an example, we present our ongoing research on the effects of different ways to instruct the EMME model prior to video creation. Finally, we highlight open questions for future investigations that could help improving the design of EMME for (programming) education.},
  language  = {en}
}
@inproceedings{EltesterFerreinSchiffer2020,
  author    = {Eltester, Niklas Sebastian and Ferrein, Alexander and Schiffer, Stefan},
  title     = {A smart factory setup based on the RoboCup logistics league},
  series = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  booktitle = {2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)},
  publisher = {IEEE},
  address   = {New York, NY},
  doi       = {10.1109/ICPS48405.2020.9274766},
  pages     = {297 -- 302},
  year      = {2020},
  abstract  = {In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.},
  language  = {en}
}
@inproceedings{ElsenSchmalzbauer2011,
  author    = {Elsen, Ingo and Schmalzbauer, Michael},
  title     = {Messsystematik zur Steuerung der Produkt- und Prozessqualit{\"a}t in Systemintegrationsprojekten - ein Erfahrungsbericht},
  series = {Software Engineering 2011 - Fachtagung des GI-Fachbereichs Softwaretechnik, 21. - 25. Februar 2011 in Karlsruhe},
  booktitle = {Software Engineering 2011 - Fachtagung des GI-Fachbereichs Softwaretechnik, 21. - 25. Februar 2011 in Karlsruhe},
  editor    = {Reussner, Ralf and Grund, Matthias and Oberweis, Andreas and Tichy, Walter},
  publisher = {Gesellschaft f{\"u}r Informatik eV},
  address   = {Bonn},
  isbn      = {9783885792772},
  issn      = {1617-5468},
  pages     = {1 Seite},
  year      = {2011},
  abstract  = {Der Erfolg eines Softwarenentwicklungsprojektes insbesondere eines Systemintegrationsprojektes wird mit der Erf{\"u}llung des „Teufelsdreiecks", „In-Time", „In-Budget", „In-Quality" gemessen. Hierzu ist die Kenntnis der Software- und Prozessqualit{\"a}t essenziell, um die Einhaltung der Qualit{\"a}tskriterien festzustellen, aber auch, um eine Vorhersage hinsichtlich Termin- und Budgettreue zu treffen. Zu diesem Zweck wurde in der T-Systems Systems Integration ein System aus verschiedenen Key Performance Indikatoren entworfen und in der Organisation implementiert, das genau das leistet und die Kriterien f{\"u}r CMMI Level 3 erf{\"u}llt.},
  language  = {de}
}
@article{ElsenKraissKrumbiegeletal.1999,
  author    = {Elsen, Ingo and Kraiss, Karl-Friedrich and Krumbiegel, Dirk and Walter, Peter and Wickel, Jochen},
  title     = {Visual information retrieval for 3D product identification: a midterm report},
  series = {KI - K{\"u}nstliche Intelligenz},
  volume    = {13},
  journal   = {KI - K{\"u}nstliche Intelligenz},
  number    = {1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1610-1987},
  pages     = {64 -- 67},
  year      = {1999},
  language  = {en}
}