@article{BohrnStuetzFleischeretal.2010,
  author    = {Bohrn, Ulrich and St{\"u}tz, Evamaria and Fleischer, Maximilian and Sch{\"o}ning, Michael Josef},
  title     = {Real-time detection of CO by eukaryotic cells},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  pages     = {17 -- 20},
  year      = {2010},
  abstract  = {In this contribution, we focus on the detection of toxic gases with living eukaryotic cells. A cell-based gas sensor system, able to measure the effects of direct exposure of gases to cells in real-time, was set up. Impedance data as well as oxygen consumption of Chinese hamster lung fibroblast cells (V79) were analysed upon exposure to carbon monoxide (CO). The CO (diluted in wet synthetic air) affects the cell respiration as indicated by an attenuated respiration signal after the CO exposure as well as an instant increase of the capacitive part of the impedance signal during the gas exposure.},
  language  = {en}
}
@article{KirchnerSpelthahnSchoeningetal.2010,
  author    = {Kirchner, Patrick and Spelthahn, Heiko and Sch{\"o}ning, Michael Josef and Henkel, Hartmut and Schneider, Andreas and Friedrich, Peter and Kolstad, Jens and Berger, J{\"o}rg},
  title     = {Realisierung eines Polyimid-basierten kalorimetrischen Gassensors zur Inline-{\"U}berwachung der H2O2-Konzentration in aseptischen Abf{\"u}llsystemen},
  series = {Tagungsband: Sensoren und Messsysteme 2010},
  journal   = {Tagungsband: Sensoren und Messsysteme 2010},
  publisher = {VDE Verlag},
  address   = {Berlin},
  isbn      = {978-3-8007-3260-9},
  pages     = {607 -- 612},
  year      = {2010},
  abstract  = {In aseptischen Abf{\"u}llsystemen wird Wasserstoffperoxid in der Gasphase aufgrund der stark oxidativen Wirkung zur Packstoffentkeimung eingesetzt. Dabei wird die Effizienz der Entkeimung im Wesentlichen von der vorliegenden H2O2-Konzentration im Packstoff bestimmt. Zur Inline-{\"U}berwachung der H2O2-Konzentration wurde ein kalorimetrischer Gassensor auf Basis einer flexiblen Polyimidfolie aus temperatursensitiven D{\"u}nnschicht-Widerst{\"a}nden und Mangan(IV)-oxid als katalytische Transducerschicht realisiert. Der Sensor weist ein lineares Ansprechverhalten mit einer Sensitivit{\"a}t von 7,15 °C/Vol.-\% in einem H2O2-Konzentrationsbereich von 0 bis 8 Vol.-\% auf. Weiterhin wurde zur Auslesung des Sensorsignals eine RFID-Elektronik, bestehend aus einem Sensor-Tag und einer Sende-/Empfangseinheit ausgelegt, sowie eine Abfolge des Messzyklus aufgestellt. Im weiteren Verlauf soll der kalorimetrische Gassensor mit der RFID-Elektronik gekoppelt und in eine Testverpackung zur Inline-{\"U}berwachung der H2O2-Konzentration in aseptischen Abf{\"u}llsystemen implementiert werden.},
  language  = {de}
}
@article{KirchnerOberlaenderFriedrichetal.2010,
  author    = {Kirchner, Patrick and Oberl{\"a}nder, Jan and Friedrich, Peter and Rysstad, Gunnar and Berger, J{\"o}rg and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Realization of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry},
  series = {Procedia Engineering},
  volume    = {5},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2010.09.098},
  pages     = {264 -- 267},
  year      = {2010},
  abstract  = {A calorimetric gas sensor is presented for the monitoring of gas-phase H2O2 at elevated temperature during sterilization processes in aseptic food industry. The sensor consists of two temperature-sensitive thin-film resistances built up on a polyimide foil with a thickness of 25 μm, which are passivated with a layer of SU-8 photo resist and catalytically activated with manganese(IV) oxide. Instead of an active heating structure, the calorimetric sensor utilizes the elevated temperature of an evaporated H2O2 aerosol. In an experimental set-up, the sensor has shown a sensitivity of 4.78 °C/(\%v/v) in a H2O2 concentration range of 0 to 10\% v/v at an evaporation temperature of 240 ∘C. Furthermore, the sensor possesses the same, unchanged sensor signal even at varied evaporation temperatures of the gas stream. The sensor characterization demonstrates the suitability of the calorimetric gas sensor for monitoring the efficiency of sterilization processes.},
  language  = {en}
}
@article{VogtMottaghyWolfetal.2010,
  author    = {Vogt, C. and Mottaghy, Darius and Wolf, A. and Rath, V. and Pechnig, R. and Clauser, C.},
  title     = {Reducing temperature uncertainties by stochastic geothermal reservoir modelling},
  series = {Geophysical Journal International},
  volume    = {181},
  journal   = {Geophysical Journal International},
  number    = {1},
  publisher = {Oxford University Press},
  address   = {Oxford},
  issn      = {1365-246X},
  doi       = {10.1111/j.1365-246X.2009.04498.x},
  pages     = {321 -- 333},
  year      = {2010},
  abstract  = {Quantifying and minimizing uncertainty is vital for simulating technically and economically successful geothermal reservoirs. To this end, we apply a stochastic modelling sequence, a Monte Carlo study, based on (i) creating an ensemble of possible realizations of a reservoir model, (ii) forward simulation of fluid flow and heat transport, and (iii) constraining post-processing using observed state variables. To generate the ensemble, we use the stochastic algorithm of Sequential Gaussian Simulation and test its potential fitting rock properties, such as thermal conductivity and permeability, of a synthetic reference model and—performing a corresponding forward simulation—state variables such as temperature. The ensemble yields probability distributions of rock properties and state variables at any location inside the reservoir. In addition, we perform a constraining post-processing in order to minimize the uncertainty of the obtained distributions by conditioning the ensemble to observed state variables, in this case temperature. This constraining post-processing works particularly well on systems dominated by fluid flow. The stochastic modelling sequence is applied to a large, steady-state 3-D heat flow model of a reservoir in The Hague, Netherlands. The spatial thermal conductivity distribution is simulated stochastically based on available logging data. Errors of bottom-hole temperatures provide thresholds for the constraining technique performed afterwards. This reduce the temperature uncertainty for the proposed target location significantly from 25 to 12 K (full distribution width) in a depth of 2300 m. Assuming a Gaussian shape of the temperature distribution, the standard deviation is 1.8 K. To allow a more comprehensive approach to quantify uncertainty, we also implement the stochastic simulation of boundary conditions and demonstrate this for the basal specific heat flow in the reservoir of The Hague. As expected, this results in a larger distribution width and hence, a larger, but more realistic uncertainty estimate. However, applying the constraining post-processing the uncertainty is again reduced to the level of the post-processing without stochastic boundary simulation. Thus, constraining post-processing is a suitable tool for reducing uncertainty estimates by observed state variables.},
  language  = {en}
}
@incollection{Matcha2010,
  author    = {Matcha, Heike},
  title     = {Regelbasierte Planung - Parametrik},
  series = {Digitale Prozesse: Planung, Gestaltung, Fertigung},
  booktitle = {Digitale Prozesse: Planung, Gestaltung, Fertigung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Ed. Detail},
  address   = {M{\"u}nchen},
  isbn      = {978-3-920034-35-5},
  pages     = {24 -- 24},
  year      = {2010},
  language  = {de}
}
@incollection{Matcha2010,
  author    = {Matcha, Heike},
  title     = {Regelbasierte Planung - Parametrik},
  series = {Digitale Prozesse : Planung, Gestaltung, Fertigung},
  booktitle = {Digitale Prozesse : Planung, Gestaltung, Fertigung},
  editor    = {Hauschild, Moritz and Karzel, R{\"u}diger},
  publisher = {Detail},
  address   = {M{\"u}nchen},
  isbn      = {978-3-95553-022-8},
  doi       = {10.11129/detail.9783955530228},
  pages     = {24 -- 24},
  year      = {2010},
  language  = {de}
}
@article{AggeloussisGiannakouAlbrachtetal.2010,
  author    = {Aggeloussis, Nickos and Giannakou, Erasmia and Albracht, Kirsten and Arampatzis, Adamantios},
  title     = {Reproducibility of fascicle length and pennation angle of gastrocnemius medialis in human gait in vivo},
  series = {Gait and Posture},
  volume    = {31},
  journal   = {Gait and Posture},
  number    = {1},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0966-6362},
  doi       = {10.1016/j.gaitpost.2009.08.249},
  pages     = {73 -- 77},
  year      = {2010},
  abstract  = {The purpose of the current study was to examine the reproducibility of fascicle length and pennation angle of gastrocnemius medialis while human walking. To the best of our knowledge, this is the first study of the reproducibility of fascicle length and pennation angle of gastrocnemius medialis in vivo during human gait. Twelve males performed 10 gait trials on a treadmill, in 2 separate days. B-mode ultrasonography, with the ultrasound probe firmly adjusted in the transverse and frontal planes using a special cast, was used to measure the fascicle length and the pennation angle of the gastrocnemius medialis (GM). A Vicon 624 system with three cameras operating at 120 Hz was also used to record the ankle and knee joint angles. The results showed that measurements of fascicle length and pennation angle showed high reproducibility during the gait cycle, both within the same day and between different days. Moreover, the root mean square differences between the repeated waveforms of both variables were very small, compared with their ranges (fascicle length: RMS = ∼3 mm, range: 38-63 mm; pennation angle: RMS = ∼1.5°, range: 22-32°). However, their reproducibility was lower compared to the joint angles. It was found that representative data have to be derived by a wide number of gait trials (fascicle length ∼six trials, pennation angle more than 10 trials), to assure the reliability of the fascicle length and pennation angle in human gait.},
  language  = {en}
}
@article{OrzadaMaderwaldPoseretal.2010,
  author    = {Orzada, Stephan and Maderwald, Stefan and Poser, Benedikt Andreas and Bitz, Andreas and Quick, Harald H. and Ladd, Mark E.},
  title     = {RF excitation using time interleaved acquisition of modes (TIAMO) to address B1 inhomogeneity in high-field MRI},
  series = {Magnetic Resonance in Medicine},
  volume    = {64},
  journal   = {Magnetic Resonance in Medicine},
  number    = {2},
  publisher = {Wiley-Liss},
  address   = {New York},
  issn      = {1522-2594},
  doi       = {10.1002/mrm.22527},
  pages     = {327 -- 333},
  year      = {2010},
  abstract  = {As the field strength and, therefore, the operational frequency in MRI is increased, the wavelength approaches the size of the human head/body, resulting in wave effects, which cause signal decreases and dropouts. Several multichannel approaches have been proposed to try to tackle these problems, including RF shimming, where each element in an array is driven by its own amplifier and modulated with a certain (constant) amplitude and phase relative to the other elements, and Transmit SENSE, where spatially tailored RF pulses are used. In this article, a relatively inexpensive and easy to use imaging scheme for 7 Tesla imaging is proposed to mitigate signal voids due to B1 field inhomogeneity. Two time-interleaved images are acquired using a different excitation mode for each. By forming virtual receive elements, both images are reconstructed together using GRAPPA to achieve a more homogeneous image, with only small SNR and SAR penalty in head and body imaging at 7 Tesla.},
  language  = {en}
}
@book{Thomas2010,
  author    = {Thomas, Axel},
  title     = {Rhetorische Knallfr{\"o}sche : Zitatensammlung f{\"u}r Politik und Wirtschaft},
  publisher = {Neck + Heyn},
  address   = {Aachen},
  isbn      = {978-3-00-033037-7},
  pages     = {145 S. : Ill.},
  year      = {2010},
  language  = {de}
}
@article{Ferrein2010,
  author    = {Ferrein, Alexander},
  title     = {Robot controllers for highly dynamic environments with real-time constraints},
  series = {K{\"u}nstliche Intelligenz : KI},
  volume    = {24},
  journal   = {K{\"u}nstliche Intelligenz : KI},
  number    = {2},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1610-1987},
  doi       = {10.1007/s13218-010-0041-3},
  pages     = {175 -- 178},
  year      = {2010},
  abstract  = {In this extended abstract we describe the robot programming and planning language READYLOG, a GOLOG dialect which was developed to support the decision making of robots acting in dynamic real-time domains like robotic soccer. The formal framework of READYLOG, which is based on the situation calculus, features imperative control structures like loops and procedures, allows for decision-theoretic planning, and accounts for a continuously changing world. We developed high-level controllers in READYLOG for our soccer robots in RoboCup's Middle-size league, but also for service robots and for autonomous agents in interactive computer games.},
  language  = {en}
}
@inproceedings{Anthrakidis2010,
  author    = {Anthrakidis, Anette},
  title     = {Schnelltest zur Absch{\"a}tzung der Wirkungsgradkennlinie von Parabolrinnenkollektoren},
  series = {Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein},
  booktitle = {Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein},
  publisher = {OTTI},
  address   = {Regensburg},
  isbn      = {978-3-941785-29-8},
  pages     = {112 -- 117},
  year      = {2010},
  language  = {de}
}
@book{Laack2010,
  author    = {Laack, Walter van},
  title     = {Schnittstelle Tod: Aufbruch zu neuem Leben?},
  publisher = {Books on Demand},
  address   = {Norderstedt},
  isbn      = {978-3-936624-10-6},
  pages     = {144 S. : Ill., graph. Darst.},
  year      = {2010},
  language  = {de}
}
@article{TimmeHuelk2010,
  author    = {Timme, Michael and H{\"u}lk, Fabian},
  title     = {Schriftform bei Mietvertrag mit einer Aktiengesellschaft},
  series = {Neue Zeitschrift f{\"u}r Gesellschaftsrecht (NZG)},
  volume    = {13},
  journal   = {Neue Zeitschrift f{\"u}r Gesellschaftsrecht (NZG)},
  number    = {5},
  isbn      = {1434-9272},
  pages     = {177 -- 178},
  year      = {2010},
  language  = {de}
}
@inproceedings{ReindlParkNordaetal.2010,
  author    = {Reindl, Lukas and Park, Jin and Norda, Hannah and Butenweg, Christoph},
  title     = {Seismic design of masonry walls subject to out-of-plane bending},
  series = {Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...},
  booktitle = {Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...},
  publisher = {Civil-Comp Press},
  address   = {Kippen},
  organization    = {International Conference on Computational Structures Technology <10, 2010, Valencia>},
  isbn      = {978-1-905088-36-2},
  doi       = {10.4203/ccp.93.348},
  pages     = {Paper 348},
  year      = {2010},
  language  = {en}
}
@inproceedings{GellertParkButenweg2010,
  author    = {Gellert, Christoph and Park, Jin and Butenweg, Christoph},
  title     = {Seismic safety verification of masonry structures},
  series = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  booktitle = {Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universit{\"a}t Dresden]. Ed. by: Wolfram J{\"a}ger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)},
  publisher = {ARGE 8IMC Dresden},
  address   = {Radebeul},
  organization    = {International Masonry Conference <8, 2010, Dresden>},
  isbn      = {978-3-00-031381-3},
  pages     = {813 -- 822},
  year      = {2010},
  language  = {en}
}
@incollection{MeskourisHoltschoppenButenwegetal.2010,
  author    = {Meskouris, Konstantin and Holtschoppen, Britta and Butenweg, Christoph and Park, Jin},
  title     = {Seismische Auslegung von Silo- und Tankbauwerken},
  series = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)},
  booktitle = {Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ingbert Mangerig. (Berichte aus dem konstruktiven Ingenieurbau ; 2010,6)},
  publisher = {Univ. der Bundeswehr},
  address   = {Neubiberg},
  pages     = {215 -- 224},
  year      = {2010},
  language  = {de}
}
@inproceedings{BungSchlenkhoff2010,
  author    = {Bung, Daniel Bernhard and Schlenkhoff, Andreas},
  title     = {Selbstbel{\"u}ftete Gerinnestr{\"o}mungen auf Treppenschussrinnen},
  series = {Talsperren im Wandel : 15. Deutsches Talsperrensymposium ; Beitr{\"a}ge zur Tagung am 14. bis 16. April 2010 im Eurogress Aachen},
  booktitle = {Talsperren im Wandel : 15. Deutsches Talsperrensymposium ; Beitr{\"a}ge zur Tagung am 14. bis 16. April 2010 im Eurogress Aachen},
  organization    = {Deutsches TalsperrenKomitee},
  isbn      = {978-3-8322-9043-6},
  pages     = {39 -- 47},
  year      = {2010},
  language  = {de}
}
@article{RieplPettrakFaulstichetal.2010,
  author    = {Riepl, Herbert Matthias and Pettrak, J{\"u}rgen and Faulstich, Martin and Herrmann, Wolfgang Anton},
  title     = {Self metathesis of fatty alcohols and amines to provide monomers for polyester and polyamide products},
  series = {Macromolecular Symposia},
  volume    = {293},
  journal   = {Macromolecular Symposia},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-3900 (eISSN)},
  doi       = {10.1002/masy.200900041},
  pages     = {39 -- 42},
  year      = {2010},
  abstract  = {Self metathesis of oleochemicals offers a variety of bifunctional compounds, that can be used as monomer for polymer production. Many precursors are in huge scales available, like oleic acid ester (biodiesel), oleyl alcohol (tensides), oleyl amines (tensides, lubricants). We show several ways to produce and separate and purify C18-α,ω-bifunctional compounds, using Grubbs 2nd Generation catalysts, starting from technical grade educts.},
  language  = {en}
}
@inproceedings{BungSchlenkhoff2010,
  author    = {Bung, Daniel Bernhard and Schlenkhoff, Andreas},
  title     = {Self-aerated skimming flow on embankment stepped spillways : the effect of additional micro-roughness on energy dissipation and oxygen transfer},
  series = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  booktitle = {Proceedings from first IAHR European congress : May 2010, Edinburgh},
  publisher = {Heriot-Watt University, School of the Built Environment},
  address   = {Edinburgh},
  organization    = {International Association for Hydraulic Engineering and Research},
  isbn      = {9780956595102},
  pages     = {Artikelkennnummer HSIIId},
  year      = {2010},
  language  = {en}
}
@article{CzarneckiWinkelmannSpiliopoulou2010,
  author    = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra},
  title     = {Services in electronic telecommunication markets: a framework for planning the virtualization of processes},
  series = {Electronic Markets},
  volume    = {20},
  journal   = {Electronic Markets},
  number    = {3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1422-8890},
  doi       = {10.1007/s12525-010-0045-8},
  pages     = {197 -- 207},
  year      = {2010},
  abstract  = {The potential of electronic markets in enabling innovative product bundles through flexible and sustainable partnerships is not yet fully exploited in the telecommunication industry. One reason is that bundling requires seamless de-assembling and re-assembling of business processes, whilst processes in telecommunication companies are often product-dependent and hard to virtualize. We propose a framework for the planning of the virtualization of processes, intended to assist the decision maker in prioritizing the processes to be virtualized: (a) we transfer the virtualization pre-requisites stated by the Process Virtualization Theory in the context of customer-oriented processes in the telecommunication industry and assess their importance in this context, (b) we derive IT-oriented requirements for the removal of virtualization barriers and highlight their demand on changes at different levels of the organization. We present a first evaluation of our approach in a case study and report on lessons learned and further steps to be performed.},
  language  = {en}
}