@article{HemmerlingMerschenzQuackWunderlich1988, author = {Hemmerling, H.-J. and Merschenz-Quack, Angelika and Wunderlich, H.}, title = {Crystal structures of indeno[1,2-d]imidazoles. XIth European Crystallographic Meeting, Vienna 1988}, series = {Zeitschrift f{\"u}r Kristallographie - Crystalline Materials}, volume = {185}, journal = {Zeitschrift f{\"u}r Kristallographie - Crystalline Materials}, number = {H. 1-4}, issn = {2196-7105 (E-Books); 2194-4946 (Print)}, pages = {256}, year = {1988}, language = {en} } @article{LauthHoelderichWagenblast1995, author = {Lauth, Jakob and Hoelderich, W. and Wagenblast, G.}, title = {Crystalline zeolites containing indigo dyes}, series = {Zeolites. 15 (1995), H. 1}, journal = {Zeolites. 15 (1995), H. 1}, isbn = {0144-2449}, pages = {86}, year = {1995}, language = {en} } @article{AbbasBalcBremenetal.2022, author = {Abbas, Karim and Balc, Nicolae and Bremen, Sebastian and Skupin, Marco}, title = {Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding}, series = {Journal of Manufacturing and Materials Processing}, volume = {6}, journal = {Journal of Manufacturing and Materials Processing}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2504-4494}, doi = {10.3390/jmmp6050093}, pages = {1 -- 12}, year = {2022}, abstract = {In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30\% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking.}, language = {en} } @article{Benkner1996, author = {Benkner, Thorsten}, title = {CS+: A Novel Self-Adaptive Slot Assignment Scheme for ATDMA}, series = {Mobile technology for the human race / 1996 IEEE 46th Vehicular Technology Conference, Atlanta, Georgia, USA, April 28 - May 1, 1996}, journal = {Mobile technology for the human race / 1996 IEEE 46th Vehicular Technology Conference, Atlanta, Georgia, USA, April 28 - May 1, 1996}, publisher = {IEEE Service Center}, address = {Piscataway, NY}, isbn = {0-7803-3158-3}, year = {1996}, language = {en} } @article{Jacobs1993, author = {Jacobs, Stephan}, title = {CSCW for Requirements Engineering - Requirements Engineering for CSCW}, series = {Proceedings of the Third European Conference on Computer Supported Cooperative Work : 13 - 17 September 1993, Milan, Italy ; ECSCW ' 93 / ed. by Giorgio de Michelis ...}, journal = {Proceedings of the Third European Conference on Computer Supported Cooperative Work : 13 - 17 September 1993, Milan, Italy ; ECSCW ' 93 / ed. by Giorgio de Michelis ...}, publisher = {Kluwer}, address = {Dordrecht [u.a.]}, isbn = {0-7923-2447-1}, pages = {XI, 364 S. : Ill., graph. Darst.}, year = {1993}, language = {en} } @article{BiselliNollJelineketal.2002, author = {Biselli, Manfred and Noll, Thomas and Jelinek, Nanni and Schmidt, Sebastian}, title = {Cultivation of Hematopoietic Stem and Progenitor Cells: biochemical Engineering Aspects / Thomas Noll, Nanni Jelinek, Sebastian Schmidt, Manfred Biselli und Christian Wandrey}, series = {Tools and Applications of Biochemical Engineering Science}, journal = {Tools and Applications of Biochemical Engineering Science}, publisher = {Springer}, address = {Berlin}, isbn = {3-540-42250-1}, pages = {111 -- 128}, year = {2002}, language = {en} } @article{BiselliHilbertNoll2001, author = {Biselli, Manfred and Hilbert, U. and Noll, T.}, title = {Cultivation of Human HCMV Specific Lymphocytes - An Example for Adoptive Immunotherapy / Hilbert, U. ; Biselli, M. ; Noll, T.}, series = {Animal cell technology : from target to market ; Tyl{\"o}sand, Sweden, June 10 - 14, 2001 / ed. by E. Lindner-Olsson ...}, journal = {Animal cell technology : from target to market ; Tyl{\"o}sand, Sweden, June 10 - 14, 2001 / ed. by E. Lindner-Olsson ...}, publisher = {Kluwer}, address = {Dordrecht}, isbn = {1-4020-0264-5}, pages = {558 -- 561}, year = {2001}, language = {en} } @article{Schnitzler2009, author = {Schnitzler, Thomas}, title = {Cultivation of hybridoma cell line CF-10H5 (DSMZ ACC477)}, series = {Application notes / Sartorius stedim biotech}, journal = {Application notes / Sartorius stedim biotech}, pages = {1 -- 4}, year = {2009}, language = {en} } @misc{WandreyBiselliSchroederetal.1999, author = {Wandrey, Christian and Biselli, Manfred and Schr{\"o}der, Bernd and Schmoll, Hans-Joachim}, title = {Culturing cells on macroporous glass carriers coated with gelatin, extracellular matrix protein and stromal cells}, pages = {1 -- 12}, year = {1999}, language = {en} } @book{LauthDingerdissenSteuerle1996, author = {Lauth, Jakob and Dingerdissen, Uwe and Steuerle, Ulrich}, title = {Cup catalyst and process for producing aziridines : [Internationale Pantentanmeldung WO9633018] ; Ver{\"o}ffentlichungsdatum: 1996-10-24 / Anmelder: BASF AG ; Dingerdissen, Uwe ; Lauth, Guenther ; Steuerle, Ulrich. Erfinder: Dingerdissen, Uwe ; Lauth, Guenther ; Steuerle, Ulrich}, publisher = {[Weltorganisation f{\"u}r geistiges Eigentum]}, address = {[Genf]}, year = {1996}, language = {en} } @article{HeieisBoeckerD'Angeloetal.2023, author = {Heieis, Jule and B{\"o}cker, Jonas and D'Angelo, Olfa and Mittag, Uwe and Albracht, Kirsten and Sch{\"o}nau, Eckhard and Meyer, Andreas and Voigtmann, Thomas and Rittweger, J{\"o}rn}, title = {Curvature of gastrocnemius muscle fascicles as function of muscle-tendon complex length and contraction in humans}, series = {Physiological Reports}, volume = {11}, journal = {Physiological Reports}, number = {11}, publisher = {Wiley}, issn = {2051-817X}, doi = {10.14814/phy2.15739}, pages = {e15739, Seite 1-11}, year = {2023}, abstract = {It has been shown that muscle fascicle curvature increases with increasing contraction level and decreasing muscle-tendon complex length. The analyses were done with limited examination windows concerning contraction level, muscle-tendon complex length, and/or intramuscular position of ultrasound imaging. With this study we aimed to investigate the correlation between fascicle arching and contraction, muscle-tendon complex length and their associated architectural parameters in gastrocnemius muscles to develop hypotheses concerning the fundamental mechanism of fascicle curving. Twelve participants were tested in five different positions (90°/105°*, 90°/90°*, 135°/90°*, 170°/90°*, and 170°/75°*; *knee/ankle angle). They performed isometric contractions at four different contraction levels (5\%, 25\%, 50\%, and 75\% of maximum voluntary contraction) in each position. Panoramic ultrasound images of gastrocnemius muscles were collected at rest and during constant contraction. Aponeuroses and fascicles were tracked in all ultrasound images and the parameters fascicle curvature, muscle-tendon complex strain, contraction level, pennation angle, fascicle length, fascicle strain, intramuscular position, sex and age group were analyzed by linear mixed effect models. Mean fascicle curvature of the medial gastrocnemius increased with contraction level (+5 m-1 from 0\% to 100\%; p = 0.006). Muscle-tendon complex length had no significant impact on mean fascicle curvature. Mean pennation angle (2.2 m-1 per 10°; p < 0.001), inverse mean fascicle length (20 m-1 per cm-1; p = 0.003), and mean fascicle strain (-0.07 m-1 per +10\%; p = 0.004) correlated with mean fascicle curvature. Evidence has also been found for intermuscular, intramuscular, and sex-specific intramuscular differences of fascicle curving. Pennation angle and the inverse fascicle length show the highest predictive capacities for fascicle curving. Due to the strong correlations between pennation angle and fascicle curvature and the intramuscular pattern of curving we suggest for future studies to examine correlations between fascicle curvature and intramuscular fluid pressure.}, language = {en} } @article{Pietsch2005, author = {Pietsch, Wolfram}, title = {Customer-Oriented Specification and Evaluation of IT Service Level Agreements}, series = {Software process improvement : Elektronische Ressource : 12th European conference ; proceedings / EuroSPI 2005, Budapest, Hungary, November 9 - 11, 2005. Ita Richardson ... (ed.)}, journal = {Software process improvement : Elektronische Ressource : 12th European conference ; proceedings / EuroSPI 2005, Budapest, Hungary, November 9 - 11, 2005. Ita Richardson ... (ed.)}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-30286-7}, pages = {83 -- 94}, year = {2005}, language = {en} } @article{HellwigRautenbachVolkmann2005, author = {Hellwig, Angelika and Rautenbach, Dieter and Volkmann, Lutz}, title = {Cuts leaving components of given minimum order}, series = {Discrete mathematics}, volume = {Vol. 292}, journal = {Discrete mathematics}, number = {Iss. 1-3}, issn = {1872-681X (E-Journal); 0012-365X (Print)}, pages = {55 -- 65}, year = {2005}, language = {en} } @inproceedings{StephanHeuermannPrantner2016, author = {Stephan, Achim and Heuermann, Holger and Prantner, Michael}, title = {Cutting human tissue with novel atmospheric-pressure microwave plasma jet}, series = {46th European Microwave Conference (EuMC)}, booktitle = {46th European Microwave Conference (EuMC)}, publisher = {IEEE}, isbn = {978-2-87487-043-9}, doi = {10.1109/EuMC.2016.7824490}, pages = {902 -- 905}, year = {2016}, language = {en} } @article{HagemannBachmannLadeetal.1994, author = {Hagemann, Hans-J{\"u}rgen and Bachmann, P.K. and Lade, H. and Leers, D.}, title = {CVD Diamond Growth: Gas Compositions and Film Properties / P.K. Bachmann, H.J. Hagemann, H. Lade, D. Leers, D.U. Wiechert and H. Wilson}, series = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo ...}, journal = {Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo ...}, publisher = {International Communications Specialists}, address = {Tokyo}, pages = {115 -- 120}, year = {1994}, language = {en} } @incollection{NiemuellerZwillingLakemeyeretal.2017, author = {Niemueller, Tim and Zwilling, Frederik and Lakemeyer, Gerhard and L{\"o}bach, Matthias and Reuter, Sebastian and Jeschke, Sabina and Ferrein, Alexander}, title = {Cyber-Physical System Intelligence}, series = {Industrial Internet of Things}, booktitle = {Industrial Internet of Things}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-42559-7}, doi = {10.1007/978-3-319-42559-7_17}, pages = {447 -- 472}, year = {2017}, abstract = {Cyber-physical systems are ever more common in manufacturing industries. Increasing their autonomy has been declared an explicit goal, for example, as part of the Industry 4.0 vision. To achieve this system intelligence, principled and software-driven methods are required to analyze sensing data, make goal-directed decisions, and eventually execute and monitor chosen tasks. In this chapter, we present a number of knowledge-based approaches to these problems and case studies with in-depth evaluation results of several different implementations for groups of autonomous mobile robots performing in-house logistics in a smart factory. We focus on knowledge-based systems because besides providing expressive languages and capable reasoning techniques, they also allow for explaining how a particular sequence of actions came about, for example, in the case of a failure.}, language = {en} } @inproceedings{KoenigWolf2018, author = {K{\"o}nig, Johannes Alexander and Wolf, Martin R.}, title = {Cybersecurity awareness training provided by the competence developing game GHOST}, series = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions}, booktitle = {ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions}, isbn = {978-1-61208-616-3}, pages = {81 -- 87}, year = {2018}, abstract = {This paper introduces a Competence Developing Game (CDG) for the purpose of a cybersecurity awareness training for businesses. The target audience will be discussed in detail to understand their requirements. It will be explained why and how a mix of business simulation and serious game meets these stakeholder requirements. It will be shown that a tablet and touchscreen based approach is the most suitable solution. In addition, an empirical study will be briefly presented. The study was carried out to examine how an interaction system for a 3D-tablet based CDG has to be designed, to be manageable for non-game experienced employees. Furthermore, it will be explained which serious content is necessary for a Cybersecurity awareness training CDG and how this content is wrapped in the game}, language = {en} } @article{Staat2001, author = {Staat, Manfred}, title = {Cyclic plastic deformation tests to verify FEM-based shakedown analyses}, year = {2001}, abstract = {Fatigue analyses are conducted with the aim of verifying that thermal ratcheting is limited. To this end it is important to make a clear distintion between the shakedown range and the ratcheting range (continuing deformation). As part of an EU-supported research project, experiments were carried out using a 4-bar model. The experiment comprised a water-cooled internal tube, and three insulated heatable outer test bars. The system was subjected to alternating axial forces, superimposed with alternating temperatures at the outer bars. The test parameters were partly selected on the basis of previous shakedown analyses. During the test, temperatures and strains were measured as a function of time. The loads and the resulting stresses were confirmed on an ongoing basis during performance of the test, and after it. Different material models were applied for this incremental elasto-plastic analysis using the ANSYS program. The results of the simulation are used to verify the FEM-based shakedown analysis.}, subject = {Materialerm{\"u}dung}, language = {en} } @article{HendersonMclaughlinScheeretal.2015, author = {Henderson, Colin J. and Mclaughlin, Lesley A. and Scheer, Nico and Stanley, Lesley A. and Wolf, C. Roland}, title = {Cytochrome b5 Is a Major Determinant of Human Cytochrome P450 CYP2D6 and CYP3A4 Activity In Vivo s}, series = {Molecular Pharmacology}, volume = {87}, journal = {Molecular Pharmacology}, number = {4}, publisher = {ASPET}, address = {Bethesda}, issn = {1521-0111}, doi = {10.1124/mol.114.097394}, pages = {733 -- 739}, year = {2015}, language = {en} } @article{GeMeyerSchoeningetal.2000, author = {Ge, B. and Meyer, T. and Sch{\"o}ning, Michael Josef and Wollenberger, U. and Lisdat, F.,}, title = {Cytochrome c' from Chromatium vinosum on gold electrodes}, series = {Electrochemistry Communications. 2 (2000), H. 8}, journal = {Electrochemistry Communications. 2 (2000), H. 8}, isbn = {1388-2481}, pages = {557 -- 561}, year = {2000}, language = {en} }