@inproceedings{HuckPoghossianBaeckeretal.2013,
  author    = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Zander, W. and Schubert, J. and Sukoyan, L. H. and Begoyan, V. and Buniatyan, V. V. and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Chemische Sensoren mit Bariumstrontiumtitanat als funktionelle Schicht zur Multiparameterdetektion},
  series = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  booktitle = {11. Dresdner Sensor-Symposium : 9.-11.12.2013},
  organization    = {Dresdner Sensor-Symposium <11, 2013>},
  isbn      = {978-3-9813484-5-3},
  pages     = {368 -- 372},
  year      = {2013},
  language  = {de}
}
@inproceedings{AlexopoulosHoffschmidtRauetal.2011,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard and Rau, Christoph and Sattler, Johannes, Christoph},
  title     = {Choice of solar share of a hybrid power plant of a central receiver system and a biogas plant in dependency of the geographical latitude},
  series = {World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Link{\"o}ping, Sweden / ed.: Bahram Moshfegh},
  booktitle = {World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Link{\"o}ping, Sweden / ed.: Bahram Moshfegh},
  publisher = {Univ. Electronic Pr.},
  address   = {Link{\"o}ping},
  isbn      = {9789173930703},
  pages     = {3710 -- 3717},
  year      = {2011},
  language  = {en}
}
@inproceedings{BlankeDringVonteinetal.2018,
  author    = {Blanke, Tobias and Dring, Bernd and Vontein, Marius and Kuhnhenne, Markus},
  title     = {Climate Change Mitigation Potentials of Vertical Building Integrated Photovoltaic},
  series = {8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden},
  booktitle = {8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden},
  pages     = {1 -- 7},
  year      = {2018},
  language  = {en}
}
@inproceedings{HammerViethMaier2005,
  author    = {Hammer, Andreas and Vieth, Matthias and Maier, Frank},
  title     = {Co-Plot as a new multivariate analysis method for operations management research?},
  series = {Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter},
  booktitle = {Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter},
  isbn      = {963-218-455-6},
  pages     = {1007 -- 1016},
  year      = {2005},
  language  = {en}
}
@inproceedings{DeyElsenFerreinetal.2021,
  author    = {Dey, Thomas and Elsen, Ingo and Ferrein, Alexander and Frauenrath, Tobias and Reke, Michael and Schiffer, Stefan},
  title     = {CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom},
  series = {PETRA 2021: The 14th PErvasive Technologies Related to Assistive Environments Conference},
  booktitle = {PETRA 2021: The 14th PErvasive Technologies Related to Assistive Environments Conference},
  editor    = {Makedon, Fillia},
  publisher = {Association for Computing Machinery},
  address   = {New York},
  isbn      = {9781450387927},
  doi       = {10.1145/3453892.3462697},
  pages     = {292 -- 299},
  year      = {2021},
  abstract  = {In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway.},
  language  = {en}
}
@inproceedings{SteinbauerFerrein2019,
  author    = {Steinbauer, Gerald and Ferrein, Alexander},
  title     = {CogRob 2018 : Cognitive Robotics Workshop. Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018). Tempe, AZ, USA, October 27th, 2018.},
  series = {CEUR workshop proceedings},
  booktitle = {CEUR workshop proceedings},
  number    = {Vol-2325},
  issn      = {1613-0073},
  pages     = {46 Seiten},
  year      = {2019},
  language  = {en}
}
@inproceedings{LindenlaufHoefkenSchuba2015,
  author    = {Lindenlauf, Simon and H{\"o}fken, Hans-Wilhelm and Schuba, Marko},
  title     = {Cold Boot Attacks on DDR2 and DDR3 SDRAM},
  series = {10th International Conference on Availability, Reliability and Security (ARES) 2015},
  booktitle = {10th International Conference on Availability, Reliability and Security (ARES) 2015},
  doi       = {10.1109/ARES.2015.28},
  pages     = {287 -- 292},
  year      = {2015},
  language  = {en}
}
@inproceedings{BitzAlaydrusStreckertetal.2002,
  author    = {Bitz, Andreas and Alaydrus, M. and Streckert, J. and Hansen, V.},
  title     = {Combination of the hybrid/sup [2]/-method and the FDTD-method for solution of boundary value problems with electrically large and high-resolution bodies},
  series = {IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313) 2002 : San Antonio, TX, USA, 16-21 June},
  booktitle = {IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313) 2002 : San Antonio, TX, USA, 16-21 June},
  publisher = {IEEE},
  address   = {Piscataway, NJ},
  isbn      = {0-7803-7330-8},
  doi       = {10.1109/APS.2002.1018209},
  pages     = {278 -- 281},
  year      = {2002},
  language  = {en}
}
@inproceedings{HorikawaAshikagaYamaguchietal.2022,
  author    = {Horikawa, Atsushi and Ashikaga, Mitsugu and Yamaguchi, Masato and Ogino, Tomoyuki and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Combined heat and power supply demonstration of Micro-Mix Hydrogen Combustion Applied to M1A-17 Gas Turbine},
  series = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  booktitle = {Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)},
  publisher = {American Society of Mechanical Engineers},
  address   = {Fairfield},
  isbn      = {978-0-7918-8599-4},
  doi       = {10.1115/GT2022-81620},
  pages     = {7 Seiten},
  year      = {2022},
  abstract  = {Kawasaki Heavy Industries, Ltd. (KHI), Aachen University of Applied Sciences, and B\&B-AGEMA GmbH have investigated the potential of low NOx micro-mix (MMX) hydrogen combustion and its application to an industrial gas turbine combustor. Engine demonstration tests of a MMX combustor for the M1A-17 gas turbine with a co-generation system were conducted in the hydrogen-fueled power generation plant in Kobe City, Japan. This paper presents the results of the commissioning test and the combined heat and power (CHP) supply demonstration. In the commissioning test, grid interconnection, loading tests and load cut-off tests were successfully conducted. All measurement results satisfied the Japanese environmental regulation values. Dust and soot as well as SOx were not detected. The NOx emissions were below 84 ppmv at 15 \% O2. The noise level at the site boundary was below 60 dB. The vibration at the site boundary was below 45 dB. During the combined heat and power supply demonstration, heat and power were supplied to neighboring public facilities with the MMX combustion technology and 100 \% hydrogen fuel. The electric power output reached 1800 kW at which the NOx emissions were 72 ppmv at 15 \% O2, and 60 \%RH. Combustion instabilities were not observed. The gas turbine efficiency was improved by about 1 \% compared to a non-premixed type combustor with water injection as NOx reduction method. During a total equivalent operation time of 1040 hours, all combustor parts, the M1A-17 gas turbine as such, and the co-generation system were without any issues.},
  language  = {en}
}
@inproceedings{HorikawaOkadaYamaguchietal.2021,
  author    = {Horikawa, Atsushi and Okada, Kunio and Yamaguchi, Masato and Aoki, Shigeki and Wirsum, Manfred and Funke, Harald and Kusterer, Karsten},
  title     = {Combustor development and engine demonstration of micro-mix hydrogen combustion applied to M1A-17 gas turbine},
  series = {ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition // Volume 3B: Combustion, Fuels, and Emissions},
  booktitle = {ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition // Volume 3B: Combustion, Fuels, and Emissions},
  doi       = {10.1115/GT2021-59666},
  pages     = {13 Seiten},
  year      = {2021},
  abstract  = {Kawasaki Heavy Industries, LTD. (KHI) has research and development projects for a future hydrogen society. These projects comprise the complete hydrogen cycle, including the production of hydrogen gas, the refinement and liquefaction for transportation and storage, and finally the utilization in a gas turbine for electricity and heat supply. Within the development of the hydrogen gas turbine, the key technology is stable and low NOx hydrogen combustion, namely the Dry Low NOx (DLN) hydrogen combustion. KHI, Aachen University of Applied Science, and B\&B-AGEMA have investigated the possibility of low NOx micro-mix hydrogen combustion and its application to an industrial gas turbine combustor. From 2014 to 2018, KHI developed a DLN hydrogen combustor for a 2MW class industrial gas turbine with the micro-mix technology. Thereby, the ignition performance, the flame stability for equivalent rotational speed, and higher load conditions were investigated. NOx emission values were kept about half of the Air Pollution Control Law in Japan: 84ppm (O2-15\%). Hereby, the elementary combustor development was completed. From May 2020, KHI started the engine demonstration operation by using an M1A-17 gas turbine with a co-generation system located in the hydrogen-fueled power generation plant in Kobe City, Japan. During the first engine demonstration tests, adjustments of engine starting and load control with fuel staging were investigated. On 21st May, the electrical power output reached 1,635 kW, which corresponds to 100\% load (ambient temperature 20 °C), and thereby NOx emissions of 65 ppm (O2-15, 60 RH\%) were verified. Here, for the first time, a DLN hydrogen-fueled gas turbine successfully generated power and heat.},
  language  = {en}
}
@inproceedings{Wessling2006,
  author    = {Weßling, Matthias},
  title     = {Como motivar a si mesmo e aos outros - o valor dos 16 Motivos Vitais para Lideran{\c{c}}a},
  year      = {2006},
  abstract  = {O Perfil Reiss apresenta no resultado uma vis{\~a}o da estrutura dos motivos e impulsos de uma pessoa. O ponto de sa{\´i}da para a an{\´a}lise do resultado {\´e} o conhecimento de que os motivos vitais (= valores e metas de sobreviv{\^e}ncia) formam a moldura, na qual as compet{\^e}ncias e capacidades que uma pessoa possui possam se desabrochar de forma ideal. A partir desse princ{\´i}pio, n{\~a}o existe no Perfil Reiss nenhum resultado que se possa classificar como correto ou falso, nem como bom ou mau. Uma compara{\c{c}}{\~a}o entre o resultado do Perfil Reiss e o conte{\´u}do de uma atividade apresentada ou ambicionada d{\´a} informa{\c{c}}{\~a}o sobre at{\´e} que ponto a capacidade de rendimento de uma pessoa nessa posi{\c{c}}{\~a}o pode vir ou vir{\´a} a se desenvolver por um longo tempo.},
  subject      = {F{\"u}hrung},
  language  = {es}
}
@inproceedings{FleischhakerGebsBudnickietal.2013,
  author    = {Fleischhaker, Robert and Gebs, Raphael and Budnicki, Aleksander and Wolf, M. and Kleinbauer, Jochen and Sutter, Dirk H.},
  title     = {Compact gigawatt-class sub-picosecond Yb:YAG thin-disk regenerative chirped-pulse amplifier with high average power at up to 800 kHz},
  series = {Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.},
  booktitle = {Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.},
  publisher = {IEEE Computer Society},
  isbn      = {978-1-4799-0593-5},
  doi       = {10.1109/CLEOE-IQEC.2013.6801054},
  pages     = {1},
  year      = {2013},
  language  = {en}
}
@inproceedings{FingerBraunBil2020,
  author    = {Finger, Felix and Braun, Carsten and Bil, Cees},
  title     = {Comparative assessment of parallel-hybrid-electric propulsion systems for four different aircraft},
  series = {AIAA SciTech Forum 2020, 06.01.2020 - 10.01.2020, Orlando},
  booktitle = {AIAA SciTech Forum 2020, 06.01.2020 - 10.01.2020, Orlando},
  doi       = {10.2514/6.2020-1502},
  pages     = {15 Seiten},
  year      = {2020},
  language  = {en}
}
@inproceedings{Finger2016,
  author    = {Finger, Felix},
  title     = {Comparative Performance and Benefit Assessment of VTOL and CTOL UAVs},
  series = {Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016},
  booktitle = {Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016},
  pages     = {10 Seiten},
  year      = {2016},
  language  = {en}
}
@inproceedings{BergmannGoettenBraunetal.2022,
  author    = {Bergmann, Ole and G{\"o}tten, Falk and Braun, Carsten and Janser, Frank},
  title     = {Comparison and evaluation of blade element methods against RANS simulations and test data},
  series = {CEAS Aeronautical Journal},
  volume    = {13},
  booktitle = {CEAS Aeronautical Journal},
  publisher = {Springer},
  address   = {Wien},
  issn      = {1869-5590 (Online)},
  doi       = {10.1007/s13272-022-00579-1},
  pages     = {535 -- 557},
  year      = {2022},
  abstract  = {This paper compares several blade element theory (BET) method-based propeller simulation tools, including an evaluation against static propeller ground tests and high-fidelity Reynolds-Average Navier Stokes (RANS) simulations. Two proprietary propeller geometries for paraglider applications are analysed in static and flight conditions. The RANS simulations are validated with the static test data and used as a reference for comparing the BET in flight conditions. The comparison includes the analysis of varying 2D aerodynamic airfoil parameters and different induced velocity calculation methods. The evaluation of the BET propeller simulation tools shows the strength of the BET tools compared to RANS simulations. The RANS simulations underpredict static experimental data within 10\% relative error, while appropriate BET tools overpredict the RANS results by 15-20\% relative error. A variation in 2D aerodynamic data depicts the need for highly accurate 2D data for accurate BET results. The nonlinear BET coupled with XFOIL for the 2D aerodynamic data matches best with RANS in static operation and flight conditions. The novel BET tool PropCODE combines both approaches and offers further correction models for highly accurate static and flight condition results.},
  language  = {en}
}
@inproceedings{OertelBung2013,
  author    = {Oertel, Mario and Bung, Daniel B.},
  title     = {Comparison of 2D dam-break waves with VOF and SPH method},
  series = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  booktitle = {Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China},
  publisher = {Tsinghua Univ. Press},
  address   = {Beijing},
  organization    = {International Association for Hydraulic Engineering and Research},
  pages     = {Artikelkennnummer: A11113},
  year      = {2013},
  language  = {en}
}
@inproceedings{TakenagaWernerSawadaetal.2012,
  author    = {Takenaga, Shoko and Werner, Frederik and Sawada, Kazuaki and Sch{\"o}ning, Michael Josef},
  title     = {Comparison of label-free ACh image sensors based on CCD and LAPS},
  isbn      = {978-3-9813484-2-2},
  doi       = {10.5162/IMCS2012/4.2.6},
  pages     = {356 -- 359},
  year      = {2012},
  language  = {en}
}
@inproceedings{LeiseSimonAltherr2020,
  author    = {Leise, Philipp and Simon, Nicolai and Altherr, Lena},
  title     = {Comparison of Piecewise Linearization Techniques to Model Electric Motor Efficiency Maps: A Computational Study},
  series = {Operations Research Proceedings 2019},
  booktitle = {Operations Research Proceedings 2019},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-030-48439-2},
  doi       = {10.1007/978-3-030-48439-2_55},
  pages     = {457 -- 463},
  year      = {2020},
  abstract  = {To maximize the travel distances of battery electric vehicles such as cars or buses for a given amount of stored energy, their powertrains are optimized energetically. One key part within optimization models for electric powertrains is the efficiency map of the electric motor. The underlying function is usually highly nonlinear and nonconvex and leads to major challenges within a global optimization process. To enable faster solution times, one possibility is the usage of piecewise linearization techniques to approximate the nonlinear efficiency map with linear constraints. Therefore, we evaluate the influence of different piecewise linearization modeling techniques on the overall solution process and compare the solution time and accuracy for methods with and without explicitly used binary variables.},
  language  = {en}
}
@inproceedings{LatzkeAlexopoulosKronhardtetal.2015,
  author    = {Latzke, Markus and Alexopoulos, Spiros and Kronhardt, Valentina and Rend{\´o}n, Carlos and Sattler, Johannes, Christoph},
  title     = {Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver},
  series = {Energy Procedia},
  booktitle = {Energy Procedia},
  issn      = {1876-6102},
  doi       = {10.1016/j.egypro.2015.03.142},
  pages     = {1327 -- 1334},
  year      = {2015},
  language  = {en}
}
@inproceedings{AlexopoulosHoffschmidtRau2011,
  author    = {Alexopoulos, Spiros and Hoffschmidt, Bernhard and Rau, Christoph},
  title     = {Comparison of steady-state and transient simulations for solar tower power plants with open-volumetric receiver},
  series = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  booktitle = {SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain},
  address   = {Granada},
  pages     = {1 CD-ROM},
  year      = {2011},
  language  = {en}
}