@phdthesis{Stapenhorst2012, author = {Stapenhorst, Carolin}, title = {The concept as an operant instrument within the interdisciplinarity of the architectural design process}, publisher = {Politecnico di Torino}, address = {Turin}, pages = {242 Seiten}, year = {2012}, abstract = {In the introduction to their book "What is philosophy?" Gilles Deleuze and Felix Guattari deplore the inflationary and trivialised use of the term concept: "Finally, the most shameful moment came when computer science, marketing, design and advertising, all the disciplines of communication, seized hold of the word concept itself and said: 'This is our concern, we are the creative ones, we are the ideas men! We are the friends of the concept, we put in our computers.' " This doctoral thesis shares the concern of Gilles Deleuze and Felix Guattari, but still, it is a thesis in architecture and thus collocated within the field of the representatives of the "ideas men". It engages in architectural design theory, and refers in particular to the investigation of methodological approaches within the design process. Therefore, the thesis will not contribute to the philosophical dimension of the term, but intends to overcome its imprecise use within the architectural discourse, in compliance with Eug{\`e}ne Viollet-le-Duc's admonition relative to vague definitions: "Dans les arts, et dans l'architecture en particulier, les d{\´e}finitions vagues ont caus{\´e} bien des erreurs, ont laiss{\´e} germer bien des pr{\´e}jug{\´e}s, enraciner bien des id{\´e}es fausses. On met un mot en avant, chacun y attache un sens diff{\´e}rent." The term concept in architecture is very often used as pure marketing collateral, it serves to sell an idea, a product, a design. Its functional applicability is reduced to a special manner of illustration, produced as one of the various design presentation documents at the end of the design process. In contrast, the original contribution of this thesis aims to give a precise, instrumental dimension to the term concept: the concept is the expression of a specific logic, capable to guide the decisional sequences of the process and thus to improve the quality of the designed projects. The motivation to define a specific instrumentality of the concept is closely connected to the issue of interdisciplinarity in the architects' profession. The interdisciplinary character of the architectural field is widely accepted and discussed as such, but the thesis intends to give a more precise definition of the various kinds of competences involved by classifying them into either the internal or the external group. The traditional notion of interdisciplinarity, predominantly seen as collaboration between architects and technical experts, and, most notably, the historical, sometimes contentious, relationship between architects and engineers is described. Referring to recent developments, the transformation of the architect's role within the professional sphere, marked by an increasing importance of diverse influences and linked to a growing risk of marginalisation, is illustrated. The thesis describes different ways to adapt to this specific kind of interdisciplinarity, which generally requires the architect's ability to connect and to integrate various contents, different points of view and diverse scales. On the other hand, the big potential which is implicit in the interdisciplinary field is exposed: architects can inform their core competence, the design, by extracting contents of different disciplinary competences, pertaining or not pertaining to their own professional field. They have the possibility to cross fields of external competences in a selective way and by doing so they can build up a corpus of knowledge capable to generate and communicate guidelines and systematic methodologies for their design. At the end, the analysis of these two aspects allows the definition of a more specific professional profile of the architect as specialist of interdisciplinarity. The thesis is concerned with the theories around the design process. The design process is seen as open to inspection and critical evaluation, with major focus on the decisional sequences which characterise it. It concentrates on the process' descriptiveness and the degree of self-conscious approaches applied within it. The importance of regulative, strategic mechanisms is illustrated by testimonies taken from a series of design researches and leads to the functional definition of the figure of the concept as representation of a coherent set of ideas, as generator of a project-specific system of rules and as communicator of decisional strategies. The concept's function is furthermore defined as communicative interface which generates and transmits the system of rules authoritative for all the disciplinary competences involved in the design process, a communicative interface which constitutes a basis of shared convictions capable to increase the efficiency of collaboration. Furthermore, the concept's capacity to explore and elaborate the contents of external disciplines is identified as a possible methodological approach to innovative design thinking. The approach to a specific functional definition of the concept is continued by the description of a series of instruments that are simultaneously generating and communicating it. It is outlined to which degree the concept itself is already the result of an ideational process, collocated within the initial phase of the design proceedings, serving as a guideline to them, but still continuously evolving and adapting in its progression. In addition, it is illustrated how all the diverse instruments of the concept are operational media through which the knowledge transition between different disciplines can occur. The considerations about the concept as operational instrument of design are elaborated with regard to a number of examples of didactical applications that are particularly involved in the development and teaching of specific design methods. These examples illustrate the interrelations between design theory and design education. They are derived from very different schools of architecture and diverse mindsets, but all of them transmit models of conceptual design thinking.}, language = {en} } @phdthesis{KurulganDemirci2012, author = {Kurulgan Demirci, Eylem}, title = {The effect of rhAPC on contractile tension : an in-vitro sepsis model of cardiomyocytes and endothelial cells}, year = {2012}, language = {en} } @phdthesis{Bragard2012, author = {Bragard, Michael}, title = {The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beitr{\"a}ge des ISEA ; 62)}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8440-1152-4}, pages = {III, 164 S. : Ill., graph. Darst.}, year = {2012}, abstract = {This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.}, language = {en} } @inproceedings{KnackstedtEggertFleischer2012, author = {Knackstedt, Ralf and Eggert, Mathias and Fleischer, Stefan}, title = {The Legal Perspective on Business to Government Reporting - A Conceptual Modeling Approach and Its Application in the Financial Sector}, series = {45th Hawaii International Conference on System Sciences 2012}, booktitle = {45th Hawaii International Conference on System Sciences 2012}, isbn = {978-0-7695-4525-7}, doi = {10.1109/HICSS.2012.576}, pages = {2309 -- 2318}, year = {2012}, language = {en} } @inproceedings{Wollert2012, author = {Wollert, J{\"o}rg}, title = {The performance of UWB-communication in an industrial environment}, series = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012}, booktitle = {IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012}, publisher = {IEEE}, address = {Piscataway, NJ}, organization = {International Symposium on Wireless Systems <1, 2012, Offenburg>}, isbn = {978-1-4673-4678-8}, doi = {10.1109/IDAACS-SWS.2012.6377639}, pages = {85 -- 90}, year = {2012}, language = {en} } @article{StadlerGarveyBocahutetal.2012, author = {Stadler, Andreas M. and Garvey, G. J. and Bocahut, A. and Sacquin-Mora, S. and Digel, Ilya and Schneider, G. J. and Natali, F. and Artmann, Gerhard and Zaccai, G.}, title = {Thermal fluctuations of haemoglobin from different species : adaptation to temperature via conformational dynamics}, series = {Journal of the Royal Society Interface}, volume = {9}, journal = {Journal of the Royal Society Interface}, number = {76}, publisher = {The Royal Society}, address = {London}, issn = {1742-5689}, doi = {10.1098/rsif.2012.0364}, pages = {2845 -- 2855}, year = {2012}, abstract = {Thermodynamic stability, configurational motions and internal forces of haemoglobin (Hb) of three endotherms (platypus, Ornithorhynchus anatinus; domestic chicken, Gallus gallus domesticus and human, Homo sapiens) and an ectotherm (salt water crocodile, Crocodylus porosus) were investigated using circular dichroism, incoherent elastic neutron scattering and coarse-grained Brownian dynamics simulations. The experimental results from Hb solutions revealed a direct correlation between protein resilience, melting temperature and average body temperature of the different species on the 0.1 ns time scale. Molecular forces appeared to be adapted to permit conformational fluctuations with a root mean square displacement close to 1.2 {\AA} at the corresponding average body temperature of the endotherms. Strong forces within crocodile Hb maintain the amplitudes of motion within a narrow limit over the entire temperature range in which the animal lives. In fully hydrated powder samples of human and chicken, Hb mean square displacements and effective force constants on the 1 ns time scale showed no differences over the whole temperature range from 10 to 300 K, in contrast to the solution case. A complementary result of the study, therefore, is that one hydration layer is not sufficient to activate all conformational fluctuations of Hb in the pico- to nanosecond time scale which might be relevant for biological function. Coarse-grained Brownian dynamics simulations permitted to explore residue-specific effects. They indicated that temperature sensing of human and chicken Hb occurs mainly at residues lining internal cavities in the β-subunits.}, language = {en} } @article{ScheikSchleserReisgen2012, author = {Scheik, Sven and Schleser, Markus and Reisgen, Uwe}, title = {Thermisches Direktf{\"u}gen von Metall und Kusntstoff: eine Alternative zur Klebtechnik}, series = {Adh{\"a}sion : Kleben \& Dichten}, volume = {56}, journal = {Adh{\"a}sion : Kleben \& Dichten}, number = {11}, publisher = {Springer Vieweg}, address = {Wiesbaden}, issn = {0001-8198 (E-Journal); 0001-8198 (Print)}, doi = {10.1007/s35145-012-0005-x}, pages = {36 -- 40}, year = {2012}, abstract = {Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik f{\"u}r Hochlohnl{\"a}nder" der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktf{\"u}gen, das eine stoffschl{\"u}ssige Verbindung zwischen Kunststoff und Metall erm{\"o}glicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.}, language = {de} } @article{OrzadaMaderwaldPoseretal.2012, author = {Orzada, S. and Maderwald, S. and Poser, B. A. and Johst, S. and Kannengiesser, S. and Ladd, M. E. and Bitz, Andreas}, title = {Time-interleaved acquisition of modes: an analysis of SAR and image contrast implications}, series = {Magnetic Resonance in Medicine}, volume = {67}, journal = {Magnetic Resonance in Medicine}, number = {4}, publisher = {Wiley-Liss}, address = {New York}, issn = {1522-2594}, doi = {10.1002/mrm.23081}, pages = {1033 -- 1041}, year = {2012}, abstract = {s the magnetic field strength and therefore the operational frequency in MRI are increased, the radiofrequency wavelength approaches the size of the human head/body, resulting in wave effects which cause signal decreases and dropouts. Especially, whole-body imaging at 7 T and higher is therefore challenging. Recently, an acquisition scheme called time-interleaved acquisition of modes has been proposed to tackle the inhomogeneity problems in high-field MRI. The basic premise is to excite two (or more) different Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-1 modes using static radiofrequency shimming in an interleaved acquisition, where the complementary radiofrequency patterns of the two modes can be exploited to improve overall signal homogeneity. In this work, the impact of time-interleaved acquisition of mode on image contrast as well as on time-averaged specific absorption rate is addressed in detail. Time-interleaved acquisition of mode is superior in Burn:x-wiley:07403194:media:MRM23081:tex2gif-stack-2 homogeneity compared with conventional radiofrequency shimming while being highly specific absorption rate efficient. Time-interleaved acquisition of modes can enable almost homogeneous high-field imaging throughout the entire field of view in PD, T2, and T2*-weighted imaging and, if a specified homogeneity criterion is met, in T1-weighted imaging as well.}, language = {en} } @article{FischerKowalskiPudasaini2012, author = {Fischer, Jan-Thomas and Kowalski, Julia and Pudasaini, Shiva P.}, title = {Topographic curvature effects in applied avalanche modelling}, series = {Cold Regions Science and Technology}, volume = {74-75}, journal = {Cold Regions Science and Technology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1872-7441}, doi = {10.1016/j.coldregions.2012.01.005}, pages = {21 -- 30}, year = {2012}, abstract = {This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.}, language = {en} } @inproceedings{BohrnStuetzFleischeretal.2012, author = {Bohrn, U. and St{\"u}tz, E. and Fleischer, M. and Sch{\"o}ning, Michael Josef and Wagner, P.}, title = {Towards a paradigm change - mammalian cells as sensitive biosensor layers for the detection of unexpected toxic substances in air}, series = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012}, booktitle = {Nanoscale Science and Technology (NS\&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012}, editor = {Abdelghani, Adnane and Sch{\"o}ning, Michael Josef}, pages = {44 -- 44}, year = {2012}, language = {en} } @inproceedings{FerreinKallweitLautermann2012, author = {Ferrein, Alexander and Kallweit, Stephan and Lautermann, Mark}, title = {Towards an autonomous pilot system for a tunnel boring machine}, series = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa}, booktitle = {5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4673-5183-6}, year = {2012}, language = {en} } @inproceedings{CzarneckiWinkelmannSpiliopoulou2012, author = {Czarnecki, Christian and Winkelmann, Axel and Spiliopoulou, Myra}, title = {Transformation in Telecommunication - Analyse und Clustering von Real-life Projekten}, series = {Multikonferenz Wirtschaftsinformatik 2012}, booktitle = {Multikonferenz Wirtschaftsinformatik 2012}, editor = {Mattfeld, Dirk Christian and Robra-Bissantz, Susanne}, publisher = {Gito}, address = {Berlin}, isbn = {9783942183635}, pages = {985 -- 998}, year = {2012}, abstract = {Die Ver{\"a}nderungen des Telekommunikationsmarktes haben in der Praxis zu einer Vielzahl von Transformationsprojekten gef{\"u}hrt. Was geh{\"o}rt aber zu einem "Transformationsprojekt", welche Prozesse und Systeme werden ver{\"a}ndert? Zur Beantwortung dieser Frage haben wir 184 Berichte zu Projekten analysiert, die als "Transformationsprojekte" bezeichnet waren. F{\"u}r die Analyse haben wir einen Kodierungsrahmen konzipiert und anhand dessen die Berichte mit einem hierarchischen Clustering-Verfahren in Themen gruppiert. Die Ergebnisse liefern Hinweise {\"u}ber die in der Praxis gesetzten Schwerpunkte und Priorit{\"a}ten. Sie k{\"o}nnen somit als Unterst{\"u}tzung f{\"u}r Unternehmen dienen, die ein Transformationsprojekt planen. Sie weisen zudem darauf hin, in welchen Bereichen eines Unternehmens Unterst{\"u}tzung durch wissenschaftlich erprobte Werkzeuge und Modelle n{\"o}tig ist.}, language = {de} } @article{EilmannRigling2012, author = {Eilmann, Britta and Rigling, Andreas}, title = {Tree-growth analyses to estimate tree species' drought tolerance}, series = {Tree Physiology}, volume = {32}, journal = {Tree Physiology}, number = {2}, editor = {Abrams, Marc}, publisher = {Oxford University Press}, address = {Oxford}, issn = {0829-318X (Print)}, doi = {10.1093/treephys/tps004}, pages = {178 -- 187}, year = {2012}, abstract = {Climate change is challenging forestry management and practices. Among other things, tree species with the ability to cope with more extreme climate conditions have to be identified. However, while environmental factors may severely limit tree growth or even cause tree death, assessing a tree species' potential for surviving future aggravated environmental conditions is rather demanding. The aim of this study was to find a tree-ring-based method suitable for identifying very drought-tolerant species, particularly potential substitute species for Scots pine (Pinus sylvestris L.) in Valais. In this inner-Alpine valley, Scots pine used to be the dominating species for dry forests, but today it suffers from high drought-induced mortality. We investigate the growth response of two native tree species, Scots pine and European larch (Larix decidua Mill.), and two non-native species, black pine (Pinus nigra Arnold) and Douglas fir (Pseudotsuga menziesii Mirb. var. menziesii), to drought. This involved analysing how the radial increment of these species responded to increasing water shortage (abandonment of irrigation) and to increasingly frequent drought years. Black pine and Douglas fir are able to cope with drought better than Scots pine and larch, as they show relatively high radial growth even after irrigation has been stopped and a plastic growth response to drought years. European larch does not seem to be able to cope with these dry conditions as it lacks the ability to recover from drought years. The analysis of trees' short-term response to extreme climate events seems to be the most promising and suitable method for detecting how tolerant a tree species is towards drought. However, combining all the methods used in this study provides a complete picture of how water shortage could limit species.}, language = {en} } @article{PaulssenNgyugenKahlckeetal.2012, author = {Paulßen, Elisabeth and Ngyugen, Hung Huy and Kahlcke, Nils and Deflon, Victor M. and Abram, Ulrich}, title = {Tricarbonyltechnetium(I) and -rhenium(I) complexes with N′-thiocarbamoylpicolylbenzamidines}, series = {Polyhedron}, volume = {40}, journal = {Polyhedron}, number = {1}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0277-5387}, doi = {10.1016/j.poly.2012.04.008}, pages = {153 -- 158}, year = {2012}, abstract = {N,N-Dialkylamino(thiocarbonyl)-N′-picolylbenzamidines react with (NEt4)2[M(CO)3X3] (M = Re, X = Br; M = Tc, X = Cl) under formation of neutral [M(CO)3L] complexes in high yields. The monoanionic NNS ligands bind in a facial coordination mode and can readily be modified at the (CS)NR1R2 moiety. The complexes [99Tc(CO)3(LPyMor)] and [Re(CO)3(L)] (L = LPyMor, LPyEt) were characterized by X-ray diffraction. Reactions of [99mTc(CO)3(H2O)3]+ with the N′-thiocarbamoylpicolylbenzamidines give the corresponding 99mTc complexes. The ester group in HLPyCOOEt allows linkage between biomolecules and the metal core.}, language = {en} } @inproceedings{EngelsGabler2012, author = {Engels, Elmar and Gabler, T.}, title = {Universelle Programmierschnittstelle f{\"u}r Motion-Logic Systeme}, series = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz}, booktitle = {Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz}, publisher = {Oldenbourg Industrieverlag}, address = {M{\"u}nchen}, isbn = {978-3-8356-3305-6}, pages = {37 -- 46}, year = {2012}, language = {de} } @inproceedings{EngelsGabler2012, author = {Engels, Elmar and Gabler, Thomas}, title = {Universelle Programmierschnittstelle f{\"u}r Motion-Logic Systeme : Struktur, Funktionen und Anwendung in der Forschung und Lehre}, year = {2012}, abstract = {Mit freundlicher Genehmigung der Autoren und des Oldenbourg Industrieverlags https://www.oldenbourg-industrieverlag.de/de/9783835633223-33223 erschienen als Beitrag im Tagungsband zur AALE-Tagung 2012. 9. Fachkonferenz 4.-5. Mai 2012, Aachen, Fachhochschule. ISBN 9783835633223 S 2-1 S. 37-46 Original-Abstract der Autoren: "Dieser Artikel beschreibt eine universelle Programmierschnittstelle zur Entwicklung von Motion-Logic Applikationen f{\"u}r industrielle Motion-Controller. Sie erm{\"o}glicht die Entwicklung von Software mit modernen Hochsprachen, wie C/C++. Visual Basic, C\#, Java, Objective-Cund visuellen Programmiersprachen, wie LabVIEW in Koexistenz mit klassischen Programmiersprachen f{\"u}r speicherprogrammierbare Steuerungen nach IEC 61131-3. Daraus ergeben sich neue M{\"o}glichkeiten industrielle Antriebs- und Steuerungssysteme mit ihrem IT-Umfeld zu verbinden."}, subject = {Speicherprogrammierte Steuerung}, language = {de} } @inproceedings{ScheikReisgenSchleseretal.2012, author = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic}, title = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch}, series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011}, booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011}, publisher = {DVS-Media}, address = {D{\"u}sseldorf}, organization = {Institut f{\"u}r Schweißtechnik und F{\"u}getechnik Aachen> ; Doktorandenseminar Klebtechnik <2, 2011, Dresden>}, isbn = {978-3-87155-599-2}, pages = {73 -- 78}, year = {2012}, language = {de} } @inproceedings{ScheikReisgenSchleseretal.2012, author = {Scheik, Sven and Reisgen, Uwe and Schleser, Markus and Huber, Frederic}, title = {Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberfl{\"a}chenveredelten Blechen im Zugscherversuch}, series = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)}, booktitle = {2. Doktorandenseminar Klebtechnik : Vortr{\"a}ge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)}, publisher = {DVS Media}, address = {D{\"u}sseldorf}, organization = {Doktorandenseminar Klebtechnik <2, 2011, Dresden> ; Institut f{\"u}r Schweißtechnik und F{\"u}getechnik }, isbn = {978-3-87155-599-2}, pages = {73 -- 78}, year = {2012}, language = {de} } @inproceedings{FuchsRitzStrauch2012, author = {Fuchs, Britta and Ritz, Thomas and Strauch, Jakob}, title = {Usability of mobile applications : dissemination of usability engineering in small and medium enterprises}, series = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]}, booktitle = {Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]}, editor = {Obaidat, Mohammad S.}, publisher = {SciTePress}, address = {[Lissabon]}, isbn = {978-989-8565-23-5}, pages = {272 -- 277}, year = {2012}, language = {en} } @inproceedings{BungSunMeirelesetal.2012, author = {Bung, Daniel Bernhard and Sun, Q. and Meireles, I. and Matos, J. and Viseu, T.}, title = {USBR type III stilling basin performance for steep stepped spillways}, series = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto}, booktitle = {Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto}, organization = {International Symposium on Hydraulic Structures <4, 2012, Porto>}, isbn = {978-989-8509-01-7}, pages = {Elektronisch publiziert}, year = {2012}, language = {en} }