@article{ZhenLiangStaatetal.2024,
  author    = {Zhen, Manghao and Liang, Yunpei and Staat, Manfred and Li, Quanqui and Li, Jianbo},
  title     = {Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression},
  series = {Theoretical and Applied Fracture Mechanics},
  volume    = {131},
  journal   = {Theoretical and Applied Fracture Mechanics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-8442},
  doi       = {10.1016/j.tafmec.2024.104373},
  pages     = {Artikel 104373},
  year      = {2024},
  abstract  = {The deformation and damage laws of non-homogeneous irregular structural planes in rocks are the basis for studying the stability of rock engineering. To investigate the damage characteristics of rock containing non-parallel fissures, uniaxial compression tests and numerical simulations were conducted on sandstone specimens containing three non-parallel fissures inclined at 0°, 45° and 90° in this study. The characteristics of crack initiation and crack evolution of fissures with different inclinations were analyzed. A constitutive model for the discontinuous fractures of fissured sandstone was proposed. The results show that the fracture behaviors of fissured sandstone specimens are discontinuous. The stress-strain curves are non-smooth and can be divided into nonlinear crack closure stage, linear elastic stage, plastic stage and brittle failure stage, of which the plastic stage contains discontinuous stress drops. During the uniaxial compression test, the middle or ends of 0° fissures were the first to crack compared to 45° and 90° fissures. The end with small distance between 0° and 45° fissures cracked first, and the end with large distance cracked later. After the final failure, 0° fissures in all specimens were fractured, while 45° and 90° fissures were not necessarily fractured. Numerical simulation results show that the concentration of compressive stress at the tips of 0°, 45° and 90° fissures, as well as the concentration of tensile stress on both sides, decreased with the increase of the inclination angle. A constitutive model for the discontinuous fractures of fissured sandstone specimens was derived by combining the logistic model and damage mechanic theory. This model can well describe the discontinuous drops of stress and agrees well with the whole processes of the stress-strain curves of the fissured sandstone specimens.},
  language  = {en}
}
@article{SchoeningKloockKnobbeetal.2004,
  author    = {Sch{\"o}ning, Michael Josef and Kloock, Joachim P. and Knobbe, D.-T. and Krause, R. and Block, K. and Wang, J. and Mulchandani, A. and Keusgen, M.},
  title     = {Direktnachweis von Pestiziden und Cyanid mit elektrochemischen Enzymsensoren},
  series = {Sensoren und Messsysteme 2004 : Tagung Ludwigsburg, 15. und 16. M{\"a}rz 2004 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik},
  journal   = {Sensoren und Messsysteme 2004 : Tagung Ludwigsburg, 15. und 16. M{\"a}rz 2004 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik},
  publisher = {VDI},
  address   = {D{\"u}sseldorf},
  isbn      = {3-18-091829-2},
  pages     = {699 -- 706},
  year      = {2004},
  language  = {en}
}
@inproceedings{StaatHeitzer2000,
  author    = {Staat, Manfred and Heitzer, Michael},
  title     = {Direct static FEM approach to limit and shakedown analysis},
  year      = {2000},
  abstract  = {Safety and reliability of structures may be assessed indirectly by stress distributions. Limit and shakedown theorems are simplified but exact methods of plasticity that provide safety factors directly in the loading space. These theorems may be used for a direct definition of the limit state function for failure by plastic collapse or by inadaptation. In a FEM formulation the limit state function is obtained from a nonlinear optimization problem. This direct approach reduces considerably the necessary knowledge of uncertain technological input data, the computing time, and the numerical error. Moreover, the direct way leads to highly effective and precise reliability analyses. The theorems are implemented into a general purpose FEM program in a way capable of large-scale analysis.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{AyalaHarrisKleefeld2024,
  author    = {Ayala, Rafael Ceja and Harris, Isaac and Kleefeld, Andreas},
  title     = {Direct sampling method via Landweber iteration for an absorbing scatterer with a conductive boundary},
  series = {Inverse Problems and Imaging},
  volume    = {18},
  journal   = {Inverse Problems and Imaging},
  number    = {3},
  publisher = {AIMS},
  address   = {Springfield},
  issn      = {1930-8337},
  doi       = {10.3934/ipi.2023051},
  pages     = {708 -- 729},
  year      = {2024},
  abstract  = {In this paper, we consider the inverse shape problem of recovering isotropic scatterers with a conductive boundary condition. Here, we assume that the measured far-field data is known at a fixed wave number. Motivated by recent work, we study a new direct sampling indicator based on the Landweber iteration and the factorization method. Therefore, we prove the connection between these reconstruction methods. The method studied here falls under the category of qualitative reconstruction methods where an imaging function is used to recover the absorbing scatterer. We prove stability of our new imaging function as well as derive a discrepancy principle for recovering the regularization parameter. The theoretical results are verified with numerical examples to show how the reconstruction performs by the new Landweber direct sampling method.},
  language  = {en}
}
@article{TranStaat2021,
  author    = {Tran, Ngoc Trinh and Staat, Manfred},
  title     = {Direct plastic structural design under random strength and random load by chance constrained programming},
  series = {European Journal of Mechanics - A/Solids},
  volume    = {85},
  journal   = {European Journal of Mechanics - A/Solids},
  number    = {Article 104106},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0997-7538},
  doi       = {10.1016/j.euromechsol.2020.104106},
  year      = {2021},
  language  = {en}
}
@article{TranStaat2020,
  author    = {Tran, Ngoc Trinh and Staat, Manfred},
  title     = {Direct plastic structural design under lognormally distributed strength by chance constrained programming},
  series = {Optimization and Engineering},
  volume    = {21},
  journal   = {Optimization and Engineering},
  number    = {1},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1573-2924},
  doi       = {10.1007/s11081-019-09437-2},
  pages     = {131 -- 157},
  year      = {2020},
  abstract  = {We propose the so-called chance constrained programming model of stochastic programming theory to analyze limit and shakedown loads of structures under random strength with a lognormal distribution. A dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit and the shakedown limit. The edge-based smoothed finite element method (ES-FEM) is used with three-node linear triangular elements.},
  language  = {en}
}
@inproceedings{TranMatthiesStavroulakisetal.2018,
  author    = {Tran, Ngoc Trinh and Matthies, Hermann G. and Stavroulakis, Georgios Eleftherios and Staat, Manfred},
  title     = {Direct plastic structural design by chance constrained programming},
  series = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  booktitle = {6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK},
  pages     = {12 Seiten},
  year      = {2018},
  abstract  = {We propose a stochastic programming method to analyse limit and shakedown of structures under random strength with lognormal distribution. In this investigation a dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit or the shakedown limit. The edge-based smoothed finite element method (ES-FEM) using three-node linear triangular elements is used.},
  language  = {en}
}
@article{Staat2005,
  author    = {Staat, Manfred},
  title     = {Direct finite element route for design-by-analysis of pressure components},
  year      = {2005},
  abstract  = {In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{StaatHeitzerLangetal.2005,
  author    = {Staat, Manfred and Heitzer, M. and Lang, H. and Wirtz, K.},
  title     = {Direct Finite Element Route for Design-by-Analysis of Pressure Components},
  series = {International Journal of Pressure Vessels and Piping. 82 (2005), H. 1},
  journal   = {International Journal of Pressure Vessels and Piping. 82 (2005), H. 1},
  isbn      = {0308-0161},
  pages     = {61 -- 67},
  year      = {2005},
  language  = {en}
}
@article{Staat2000,
  author    = {Staat, Manfred},
  title     = {Direct FEM Limit and Shakedown Analysis with Uncertain Data},
  year      = {2000},
  abstract  = {The structural reliability with respect to plastic collapse or to inadaptation is formulated on the basis of the lower bound limit and shakedown theorems. A direct definition of the limit state function is achieved which permits the use of the highly effective first order reliability methods (FORM) is achieved. The theorems are implemented into a general purpose FEM program in a way capable of large-scale analysis. The limit state function and its gradient are obtained from a mathematical optimization problem. This direct approach reduces considerably the necessary knowledge of uncertain technological input data, the computing time, and the numerical error, leading to highly effective and precise reliability analyses.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{HeitzerStaat2000,
  author    = {Heitzer, M. and Staat, Manfred},
  title     = {Direct FEM approach to design-by-analysis of pressurized components},
  year      = {2000},
  abstract  = {Abstracts of the ACHEMA 2000 - International Meeting on Chemical Engineering, Environmental Protection and Biotechnology, May 22 - 27, 2000. Frankfurt am Main. Achema 2000 : special edition / Linde. [Ed.: Linde AG. Red.: Volker R. Leski]. - Wiesbaden : Linde AG, 2000. - 56 p. : Ill., . - pp: 79 - 81},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KeusgenKloockKnobbeetal.2004,
  author    = {Keusgen, M. and Kloock, Joachim P. and Knobbe, D.-T. and J{\"u}nger, M. and Krest, I. and Goldbach, M. and Klein, W. and Sch{\"o}ning, Michael Josef},
  title     = {Direct determination of cyanides by potentiometric biosensors},
  series = {Sensors and Actuators B. 103 (2004), H. 1-2},
  journal   = {Sensors and Actuators B. 103 (2004), H. 1-2},
  isbn      = {0925-4005},
  pages     = {380 -- 385},
  year      = {2004},
  language  = {en}
}
@article{ArtmannLi1994,
  author    = {Artmann, Gerhard and Li, Anlan},
  title     = {Dihydroergocryptine maintains erythrocyte fluidity in acidotic and hyperosmolar suspensions modelling hypoxic and ischemic microcirculation. Li, Anlan; Artmann, Gerhard Michael},
  series = {Clinical Hemorheology. 15 (1994), H. 2},
  journal   = {Clinical Hemorheology. 15 (1994), H. 2},
  isbn      = {0271-5198},
  pages     = {133 -- 146},
  year      = {1994},
  language  = {en}
}
@article{ErmolenkoVlasovKolodnikovetal.2004,
  author    = {Ermolenko, Y.E. and Vlasov, Y.G. and Kolodnikov, V.V. and Shabaldkin, D. A. and Kloock, Joachim P. and Sch{\"o}ning, Michael Josef},
  title     = {Diffusion of radioactive tracers (204Tl, 110mAg) and ionic conductivity in membrane materials for the chemical sensors},
  series = {Advances in nuclear and radiochemistry : extended abstracts of papers presented at the Sixth International Conference on Nuclear and Radiochemistry (NRC-6), 29 August to 3 September 2004, Aachen, Germany ; in cooperation with University of Cologne, GDCh, FECS, OECD-NEA and IAEA / Syed M. Qaim ... (eds.).},
  journal   = {Advances in nuclear and radiochemistry : extended abstracts of papers presented at the Sixth International Conference on Nuclear and Radiochemistry (NRC-6), 29 August to 3 September 2004, Aachen, Germany ; in cooperation with University of Cologne, GDCh, FECS, OECD-NEA and IAEA / Syed M. Qaim ... (eds.).},
  publisher = {Forschungszentrum J{\"u}lich, Zentralbibliothek},
  address   = {J{\"u}lich},
  isbn      = {3893363629},
  pages     = {483 -- 485},
  year      = {2004},
  language  = {en}
}
@article{MiyamotoYoshidaSakaietal.2011,
  author    = {Miyamoto, Ko-ichiro and Yoshida, Midori and Sakai, Taito and Matsuzaka, Atsushi and Wagner, Torsten and Kanoh, Sanoh and Yoshinobu, Tatsuo and Sch{\"o}ning, Michael Josef},
  title     = {Differential setup of light-addressable potentiometric sensor with an enzyme reactor in a flow channel},
  series = {Japanese Journal of Applied Physics. 50 (2011)},
  journal   = {Japanese Journal of Applied Physics. 50 (2011)},
  publisher = {Japan Society of Applied Physics},
  address   = {Bristol},
  isbn      = {0021-4922},
  pages     = {04DL08-1 -- 04DL08-5},
  year      = {2011},
  language  = {en}
}
@article{HeinzelSchaeferMuelleretal.2010,
  author    = {Heinzel, Alexander and Sch{\"a}fer, Ralf and M{\"u}ller, Hans-Wilhelm and Schieffer, Andre and Ingenhag, Ariane and Northoff, Georg and Franz, Matthias and Hautzel, Hubertus},
  title     = {Differential modulation of valence and arousal in high-alexithymic and low-alexithymic individuals},
  series = {Neuroreport},
  volume    = {21},
  journal   = {Neuroreport},
  number    = {15},
  publisher = {Lippincott Williams \& Wilkins},
  address   = {London},
  issn      = {1473-558X},
  doi       = {10.1097/WNR.0b013e32833f38e0},
  pages     = {998 -- 1002},
  year      = {2010},
  abstract  = {High-alexithymic individuals are characterized by an impaired ability to identify and communicate emotions whereas low-alexithymic individuals have a wide-ranging ability to deal with emotions. This study examined the hypothesis that valence and arousal modifications of emotional stimuli differentially modulate cortical regions in high-alexithymic and low-alexithymic individuals. To this end, 28 high-alexithymic and 25 low-alexithymic individuals were investigated with event-related fMRI using visual emotional stimuli. We found differential neural activations in the dorsal anterior cingulate, the insula and the amygdala. We suggest that these differences may account for the impaired ability of high-alexithymic individuals to appropriately handle emotional stimuli.},
  language  = {en}
}
@article{DantismTakenagaWagneretal.2017,
  author    = {Dantism, Shahriar and Takenaga, Shoko and Wagner, Torsten and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Differential imaging of the metabolism of bacteria and eukaryotic cells based on light-addressable potentiometric sensors},
  series = {Electrochimica Acta},
  volume    = {246},
  journal   = {Electrochimica Acta},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2017.05.196},
  pages     = {234 -- 241},
  year      = {2017},
  abstract  = {A light-addressable potentiometric sensor (LAPS) is a field-effect-based potentiometric sensor with an electrolyte/insulator/semiconductor (EIS) structure, which is able to monitor analyte concentrations of (bio-)chemical species in aqueous solutions in a spatially resolved way. Therefore, it is also an appropriate tool to record 2D-chemical images of concentration variations on the sensor surface. In the present work, two differential, LAPS-based measurement principles are introduced to determine the metabolic activity of Escherichia coli (E. coli) K12 and Chinese hamster ovary (CHO) cells as test microorganisms. Hereby, we focus on i) the determination of the extracellular acidification rate (ΔpH/min) after adding glucose solutions to the cell suspensions; and ii) recording the amplitude increase of the photocurrent (Iph) related to the produced acids from E. coli K12 bacteria and CHO cells on the sensor surface by 2D-chemical imaging. For this purpose, 3D-printed multi-chamber structures were developed and mounted on the planar sensor-chip surface to define four independent compartments, enabling differential measurements with varying cell concentrations. The differential concept allows eliminating unwanted drift effects and, with the four-chamber structures, measurements on the different cell concentrations were performed simultaneously, thus reducing also the overall measuring time.},
  language  = {en}
}
@article{OezsoyluKizildagSchoeningetal.2020,
  author    = {{\"O}zsoylu, Dua and Kizildag, Sefa and Sch{\"o}ning, Michael Josef and Wagner, Torsten},
  title     = {Differential chemical imaging of extracellular acidification within microfluidic channels using a plasma-functionalized light-addressable potentiometric sensor (LAPS)},
  series = {Physics in Medicine},
  volume    = {10},
  journal   = {Physics in Medicine},
  number    = {100030},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2352-4510},
  doi       = {10.1016/j.phmed.2020.100030},
  pages     = {8},
  year      = {2020},
  abstract  = {Extracellular acidification is a basic indicator for alterations in two vital metabolic pathways: glycolysis and cellular respiration. Measuring these alterations by monitoring extracellular acidification using cell-based biosensors such as LAPS plays an important role in studying these pathways whose disorders are associated with numerous diseases including cancer. However, the surface of the biosensors must be specially tailored to ensure high cell compatibility so that cells can represent more in vivo-like behavior, which is critical to gain more realistic in vitro results from the analyses, e.g., drug discovery experiments. In this work, O2 plasma patterning on the LAPS surface is studied to enhance surface features of the sensor chip, e.g., wettability and biofunctionality. The surface treated with O2 plasma for 30 s exhibits enhanced cytocompatibility for adherent CHO-K1 cells, which promotes cell spreading and proliferation. The plasma-modified LAPS chip is then integrated into a microfluidic system, which provides two identical channels to facilitate differential measurements of the extracellular acidification of CHO-K1 cells. To the best of our knowledge, it is the first time that extracellular acidification within microfluidic channels is quantitatively visualized as differential (bio-)chemical images.},
  language  = {en}
}
@inproceedings{DroszezSannoGoldmannetal.2016,
  author    = {Droszez, Anna and Sanno, Maximilian and Goldmann, Jan-Peter and Albracht, Kirsten and Br{\"u}ggemann, Gerd-Peter and Braunstein, Bjoern},
  title     = {Differences between take-off behavior during vertical jumps and two artistic elements},
  series = {34th International Conference of Biomechanics in Sport, Tsukuba, Japan, July 18-22, 2016},
  booktitle = {34th International Conference of Biomechanics in Sport, Tsukuba, Japan, July 18-22, 2016},
  issn      = {1999-4168},
  pages     = {577 -- 580},
  year      = {2016},
  language  = {en}
}
@article{ChenJostVolkeretal.2017,
  author    = {Chen, Chao and Jost, Peter and Volker, Hanno and Kaminski, Marvin and Wirtssohn, Matti R. and Engelmann, Ulrich M. and Kr{\"u}ger, K. and Schlich, Franziska F. and Schlockermann, Carl and Lobo, Ricardo P.S.M. and Wuttig, Matthias},
  title     = {Dielectric properties of amorphous phase-change materials},
  series = {Physical Review B},
  volume    = {95},
  journal   = {Physical Review B},
  number    = {9},
  issn      = {2469-9950},
  doi       = {10.1103/PhysRevB.95.094111},
  pages     = {Article number 094111},
  year      = {2017},
  language  = {en}
}