@article{ReisgenSchleserAbdurakhmanovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir and Gumenyuk, Andrey},
  title     = {Measuring of plasma properties induced by non-vacuum electron beam welding},
  series = {Physics of plasma},
  volume    = {19},
  journal   = {Physics of plasma},
  number    = {1},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {1089-7674 (E-Journal); 1070-664X (Print)},
  doi       = {10.1063/1.3675874},
  pages     = {1 -- 7},
  year      = {2012},
  abstract  = {Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel's method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2012,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander and F{\"u}ssel, Uwe and Schnick, Michael and Hertel, Martin and Jaeckel, Sebastian},
  title     = {Modelling and visualisation of the GMA process},
  series = {Welding and Cutting},
  volume    = {11},
  journal   = {Welding and Cutting},
  number    = {4},
  publisher = {DVS Verlag},
  address   = {D{\"u}sseldorf},
  issn      = {1612-3433},
  pages     = {242 -- 249},
  year      = {2012},
  language  = {en}
}
@article{HoetterFateriGebhardt2012,
  author    = {H{\"o}tter, Jan-Steffen and Fateri, Miranda and Gebhardt, Andreas},
  title     = {Selective laser melting of metals: desktop machines open up new chances even for small companies},
  series = {Advanced materials research},
  volume    = {622-623},
  journal   = {Advanced materials research},
  publisher = {Trans Tech Publ.},
  address   = {Baech},
  issn      = {1662-8985 (E-Journal); 1022-6680 (Print)},
  doi       = {10.4028/www.scientific.net/AMR.622-623.461},
  pages     = {461 -- 465},
  year      = {2012},
  abstract  = {Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.},
  language  = {en}
}
@article{LeidingerNoistenWollert2012,
  author    = {Leidinger, Rafael and Noisten, Thomas and Wollert, J{\"o}rg},
  title     = {Realtime automation networks in moVing industrial environments},
  series = {Journal of systemics, cybernetics and informatics},
  volume    = {Vol. 10},
  journal   = {Journal of systemics, cybernetics and informatics},
  number    = {Iss. 2},
  publisher = {IIIC},
  address   = {Orlando},
  issn      = {1690-4532},
  pages     = {52 -- 56},
  year      = {2012},
  abstract  = {The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.},
  language  = {en}
}
@article{MukherjeeRamazaniYangetal.2011,
  author    = {Mukherjee, Krishnendu and Ramazani, Ali and Yang, Li and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization of gas metal arc welded hot rolled DP600 steel},
  series = {Steel research international},
  volume    = {Vol. 82},
  journal   = {Steel research international},
  number    = {Iss. 12},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1869-344X (E-Book); 1611-3683 (Print)},
  pages     = {1408 -- 1416},
  year      = {2011},
  language  = {en}
}
@article{GlowaniaGriesSchoeneetal.2011,
  author    = {Glowania, Michael and Gries, Thomas and Schoene, Jens and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative coating technology for textile reinforcements of concrete applications},
  series = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  journal   = {13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)},
  publisher = {Trans Tech Publications},
  address   = {B{\"a}ch},
  organization    = {International Congress Polymers in Concrete <13, 2010, Funchal, Madeira>},
  isbn      = {978-3-03785-008-4},
  issn      = {1013-9826 (E-Journal) ; 0252-1059 (Print)},
  pages     = {167 -- 173},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel},
  series = {ISIJ international},
  volume    = {Vol. 51},
  journal   = {ISIJ international},
  number    = {No. 3},
  publisher = {ISIJ},
  address   = {Tōkyō},
  organization    = {Iron and Steel Institute of Japan (ISIJ)},
  issn      = {1347-5460 (E-Journal); 0915-1559 (Print)},
  pages     = {429 -- 434},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Propawe, Reinhart and Schleser, Markus and Reisgen, Uwe},
  title     = {Innovative approach of joining hybrid components},
  series = {Journal of laser applications},
  volume    = {Vol. 23},
  journal   = {Journal of laser applications},
  number    = {Iss. 3},
  publisher = {Laser Institute of America},
  address   = {Orlando, Fla.},
  issn      = {1042-346X},
  pages     = {32007},
  year      = {2011},
  language  = {en}
}
@article{RoesnerScheikOlowinskyetal.2011,
  author    = {Roesner, Andreas and Scheik, Sven and Olowinsky, Alexander and Gillner, Arnold and Reisgen, Uwe and Schleser, Markus},
  title     = {Laser assisted joining of plastic metal hybrids},
  series = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  journal   = {Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)},
  publisher = {Elsevier},
  address   = {Amsterdam},
  organization    = {International WLT Conference on Lasers in Manufacturing <6, M{\"u}nchen, 2011>},
  issn      = {1875-3892 (E-Journal); 1875-3884 (Print)},
  pages     = {370 -- 377},
  year      = {2011},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2011,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Zabirov, Alexander},
  title     = {Virtual welding equipment for simulation of GMAW processes with integration of power source regulation},
  series = {Frontiers of materials science},
  volume    = {Vol. 5},
  journal   = {Frontiers of materials science},
  number    = {Iss. 2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2095-0268 (E-Journal); 2095-025X (Print)},
  pages     = {79 -- 89},
  year      = {2011},
  language  = {en}
}
@article{GebhardtSchmidtHoetteretal.2010,
  author    = {Gebhardt, Andreas and Schmidt, Frank-Michael and H{\"o}tter, Jan-Steffen and Sokalla, Wolfgang and Sokalla, Patrick},
  title     = {Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry},
  series = {Physics Procedia},
  volume    = {5},
  journal   = {Physics Procedia},
  number    = {2},
  isbn      = {1875-3892},
  pages     = {543 -- 549},
  year      = {2010},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets},
  series = {Journal of materials processing technology},
  volume    = {210},
  journal   = {Journal of materials processing technology},
  number    = {15},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0924-0136},
  doi       = {http10.1016/j.jmatprotec.2010.08.003},
  pages     = {2188 -- 2196},
  year      = {2010},
  abstract  = {Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking-Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.},
  language  = {en}
}
@article{MukherjeePrahlBlecketal.2010,
  author    = {Mukherjee, Krishnendu and Prahl, Ulrich and Bleck, Wolfgang and Reisgen, Uwe and Schleser, Markus and Abdurakhmanov, Aydemir},
  title     = {Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels},
  series = {Materialwissenschaft und Werkstofftechnik},
  volume    = {41},
  journal   = {Materialwissenschaft und Werkstofftechnik},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4052},
  doi       = {10.1002/mawe.201000692},
  pages     = {972 -- 983},
  year      = {2010},
  abstract  = {The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.},
  language  = {en}
}
@article{ReisgenSchleserMokrovetal.2010,
  author    = {Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg and Ahmed, Essam},
  title     = {Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels},
  series = {Applied surface science},
  volume    = {257},
  journal   = {Applied surface science},
  number    = {5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-4332 (E-Journal); 0169-4332 (Print)},
  doi       = {10.1016/j.apsusc.2010.08.042},
  pages     = {1401 -- 1406},
  year      = {2010},
  abstract  = {The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.},
  language  = {en}
}
@article{AhmedReisgenSchleseretal.2010,
  author    = {Ahmed, Essam and Reisgen, Uwe and Schleser, Markus and Mokrov, Oleg},
  title     = {On formability of tailor laser welded blanks of DP/TRIP steel sheets},
  series = {Science and technology of welding and joining},
  volume    = {15},
  journal   = {Science and technology of welding and joining},
  number    = {5},
  publisher = {Maney},
  address   = {Leeds},
  issn      = {1743-2936},
  doi       = {10.1179/136217110X12731414739754},
  pages     = {337 -- 342},
  year      = {2010},
  abstract  = {This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.},
  language  = {en}
}
@article{HaselgruberMautnerThiele2010,
  author    = {Haselgruber, Nikolaus and Mautner, Karin and Thiele, Jan},
  title     = {Usage Space Analysis for Reliability Testing},
  series = {Quality and Reliability Engineering International},
  volume    = {26},
  journal   = {Quality and Reliability Engineering International},
  number    = {8},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1099-1638},
  doi       = {10.1002/qre.1155},
  pages     = {877 -- 885},
  year      = {2010},
  abstract  = {During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.},
  language  = {en}
}
@article{EnningBaier2009,
  author    = {Enning, Manfred and Baier, M.},
  title     = {Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.},
  series = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]},
  journal   = {Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium \& Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert St{\"u}ssi [Hrsg.]},
  address   = {Stavanger},
  pages     = {CD-Rom},
  year      = {2009},
  language  = {en}
}
@article{PfaffBurnham2009,
  author    = {Pfaff, Raphael and Burnham, Keith J.},
  title     = {On abstraction and interpretability: a behavioural perspective},
  series = {Systems Science},
  volume    = {Vol. 35},
  journal   = {Systems Science},
  number    = {Iss. 2},
  issn      = {0137-1223},
  pages     = {19 -- 26},
  year      = {2009},
  language  = {en}
}
@article{SeilerPichlerPfaffetal.2009,
  author    = {Seiler, Friedrich and Pichler, Alexander and Pfaff, Raphael and Srulijes, Julio},
  title     = {Novel processing tools for automated doppler picture velocimetry (DPV) evaluation},
  series = {Journal of visualization},
  volume    = {Vol. 12},
  journal   = {Journal of visualization},
  number    = {Iss. 4},
  issn      = {1343-8875},
  pages     = {323 -- 337},
  year      = {2009},
  language  = {en}
}
@article{MautnerForsterKornhuberetal.2008,
  author    = {Mautner, Karin and Forster, Ralf and Kornhuber, Ralf and Sander, Oliver},
  title     = {Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver},
  series = {Domain Decomposition Methods in Science and Engineering XVII},
  journal   = {Domain Decomposition Methods in Science and Engineering XVII},
  isbn      = {978-3-540-75198-4},
  pages     = {383 -- 390},
  year      = {2008},
  language  = {en}
}