@article{PoghossianWeldenBuniatyanetal.2021,
  author    = {Poghossian, Arshak and Welden, Rene and Buniatyan, Vahe V. and Sch{\"o}ning, Michael Josef},
  title     = {An Array of On-Chip Integrated, Individually Addressable Capacitive Field-Effect Sensors with Control Gate: Design and Modelling},
  series = {Sensors},
  volume    = {21},
  journal   = {Sensors},
  number    = {18},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s21186161},
  pages     = {17},
  year      = {2021},
  abstract  = {The on-chip integration of multiple biochemical sensors based on field-effect electrolyte-insulator-semiconductor capacitors (EISCAP) is challenging due to technological difficulties in realization of electrically isolated EISCAPs on the same Si chip. In this work, we present a new simple design for an array of on-chip integrated, individually electrically addressable EISCAPs with an additional control gate (CG-EISCAP). The existence of the CG enables an addressable activation or deactivation of on-chip integrated individual CG-EISCAPs by simple electrical switching the CG of each sensor in various setups, and makes the new design capable for multianalyte detection without cross-talk effects between the sensors in the array. The new designed CG-EISCAP chip was modelled in so-called floating/short-circuited and floating/capacitively-coupled setups, and the corresponding electrical equivalent circuits were developed. In addition, the capacitance-voltage curves of the CG-EISCAP chip in different setups were simulated and compared with that of a single EISCAP sensor. Moreover, the sensitivity of the CG-EISCAP chip to surface potential changes induced by biochemical reactions was simulated and an impact of different parameters, such as gate voltage, insulator thickness and doping concentration in Si, on the sensitivity has been discussed.},
  language  = {en}
}
@techreport{Tippkoetter2021,
  author    = {Tippk{\"o}tter, Nils},
  title     = {TreBec - Herstellung eines Mehrwegbechers aus Treber : Sachbericht zum Verwendungsnachweis},
  publisher = {FH Aachen},
  address   = {J{\"u}lich},
  doi       = {10.2314/KXP:1858723302},
  pages     = {10 Seiten},
  year      = {2021},
  abstract  = {Laufzeit des Vorhabens und Berichtszeitraum: 01.10.2020-30.09.2021},
  language  = {de}
}
@incollection{EngelmannShashaSlabu2021,
  author    = {Engelmann, Ulrich M. and Shasha, Carolyn and Slabu, Ioana},
  title     = {Magnetic nanoparticle relaxation in biomedical application: focus on simulating nanoparticle heating},
  series = {Magnetic nanoparticles in human health and medicine},
  booktitle = {Magnetic nanoparticles in human health and medicine},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken, New Jeersey},
  isbn      = {978-1-119-75467-1},
  pages     = {327 -- 354},
  year      = {2021},
  language  = {en}
}
@article{GorzalkaSchmiedtSchorn2021,
  author    = {Gorzalka, Philip and Schmiedt, Jacob Estevam and Schorn, Christian},
  title     = {Automated Generation of an Energy Simulation Model for an Existing Building from UAV Imagery},
  series = {Buildings},
  volume    = {11},
  journal   = {Buildings},
  number    = {9},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2075-5309},
  doi       = {10.3390/buildings11090380},
  pages     = {15 Seiten},
  year      = {2021},
  abstract  = {An approach to automatically generate a dynamic energy simulation model in Modelica for a single existing building is presented. It aims at collecting data about the status quo in the preparation of energy retrofits with low effort and costs. The proposed method starts from a polygon model of the outer building envelope obtained from photogrammetrically generated point clouds. The open-source tools TEASER and AixLib are used for data enrichment and model generation. A case study was conducted on a single-family house. The resulting model can accurately reproduce the internal air temperatures during synthetical heating up and cooling down. Modelled and measured whole building heat transfer coefficients (HTC) agree within a 12\% range. A sensitivity analysis emphasises the importance of accurate window characterisations and justifies the use of a very simplified interior geometry. Uncertainties arising from the use of archetype U-values are estimated by comparing different typologies, with best- and worst-case estimates showing differences in pre-retrofit heat demand of about ±20\% to the average; however, as the assumptions made are permitted by some national standards, the method is already close to practical applicability and opens up a path to quickly estimate possible financial and energy savings after refurbishment.},
  language  = {en}
}
@inproceedings{BornheimGriegerBialonski2021,
  author    = {Bornheim, Tobias and Grieger, Niklas and Bialonski, Stephan},
  title     = {FHAC at GermEval 2021: Identifying German toxic, engaging, and fact-claiming comments with ensemble learning},
  series = {Proceedings of the GermEval 2021 Workshop on the Identification of Toxic, Engaging, and Fact-Claiming Comments : 17th Conference on Natural Language Processing KONVENS 2021},
  booktitle = {Proceedings of the GermEval 2021 Workshop on the Identification of Toxic, Engaging, and Fact-Claiming Comments : 17th Conference on Natural Language Processing KONVENS 2021},
  publisher = {Heinrich Heine University},
  address   = {D{\"u}sseldorf},
  doi       = {10.48415/2021/fhw5-x128},
  pages     = {105 -- 111},
  year      = {2021},
  language  = {en}
}
@inproceedings{SchopenKemperEsch2021,
  author    = {Schopen, Oliver and Kemper, Hans and Esch, Thomas},
  title     = {Development of a comparison methodology and evaluation matrix for electrically driven compressors in ICE and FC},
  series = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  booktitle = {Proceedings of the 1st UNITED - Southeast Asia Automotive Interest Group (SAIG) International Conference},
  publisher = {FH Joanneum},
  address   = {Graz},
  isbn      = {978-3-902103-94-9},
  pages     = {45 -- 46},
  year      = {2021},
  abstract  = {In addition to electromobility and alternative drive systems, a focus is set on electrically driven compressors (EDC), with a high potential for increasing the efficiency of internal combustion engines (ICE) and fuel cells [01]. The primary objective is to increase the ICE torque, provided independently of the ICE speed by compressing the intake air and consequently the ICE filling level supported by the compressor. For operation independent from the ICE speed, the EDC compressor is decoupled from the turbine by using an electric compressor motor (CM) instead of the turbine. ICE performances can be increased by the use of EDC where individual compressor parameters are adapted to the respective application area [02] [03]. This task contains great challenges, increased by demands with regard to pollutant reduction while maintaining constant performance and reduced fuel consumption. The FH-Aachen is equipped with an EDC test bench which enables EDC-investigations in various configurations and operating modes. Characteristic properties of different compressors can be determined, which build the basis for a comparison methodology. Subject of this project is the development of a comparison methodology for EDC with an associated evaluation method and a defined overall evaluation method. For the application of this comparison methodology, corresponding series of measurements are carried out on the EDC test bench using an appropriate test device.},
  language  = {en}
}
@article{HeuermannHarzheimCronenbroeck2021,
  author    = {Heuermann, Holger and Harzheim, Thomas and Cronenbroeck, Tobias},
  title     = {First SIMO harmonic radar based on the SFCW concept and the HR transfer function},
  series = {Remote sensing},
  volume    = {13},
  journal   = {Remote sensing},
  number    = {24},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2072-4292},
  doi       = {10.3390/rs13245088},
  pages     = {23 Seiten},
  year      = {2021},
  abstract  = {This paper presents a new SIMO radar system based on a harmonic radar (HR) stepped frequency continuous wave (SFCW) architecture. Simple tags that can be electronically individually activated and deactivated via a DC control voltage were developed and combined to form an MO array field. This HR operates in the entire 2.45 GHz ISM band for transmitting the illumination signal and receives at twice the stimulus frequency and bandwidth centered around 4.9 GHz. This paper presents the development, the basic theory of a HR system for the characterization of objects placed into the propagation path in-between the radar and the reflectors (similar to a free-space measurement with a network analyzer) as well as first measurements performed by the system. Further detailed measurement series will be made available later on to other researchers to develop AI and machine learning based signal processing routines or synthetic aperture radar algorithms for imaging, object recognition, and feature extraction. For this purpose, the necessary information is published in this paper. It is explained in detail why this SIMO-HR can be an attractive solution augmenting or replacing existing systems for radar measurements in production technology for material under test measurements and as a simplified MIMO system. The novel HR transfer function, which is a basis for researchers and developers for material characterization or imaging algorithms, is introduced and metrologically verified in a well traceable coaxial setup.},
  language  = {en}
}
@article{RichterBraunsteinStaeudleetal.2021,
  author    = {Richter, Charlotte and Braunstein, Bjoern and St{\"a}udle, Benjamin and Attias, Julia and Suess, Alexander and Weber, Tobias and Mileva, Katja N. and Rittweger, Joern and Green, David A. and Albracht, Kirsten},
  title     = {Gastrocnemius medialis contractile behavior is preserved during 30\% body weight supported gait training},
  series = {Frontiers in Sports and Active Living},
  volume    = {2021},
  journal   = {Frontiers in Sports and Active Living},
  number    = {2},
  publisher = {Frontiers},
  address   = {Lausanne},
  issn      = {2624-9367},
  doi       = {10.3389/fspor.2020.614559},
  pages     = {Artikel 614559},
  year      = {2021},
  abstract  = {Rehabilitative body weight supported gait training aims at restoring walking function as a key element in activities of daily living. Studies demonstrated reductions in muscle and joint forces, while kinematic gait patterns appear to be preserved with up to 30\% weight support. However, the influence of body weight support on muscle architecture, with respect to fascicle and series elastic element behavior is unknown, despite this having potential clinical implications for gait retraining. Eight males (31.9 ± 4.7 years) walked at 75\% of the speed at which they typically transition to running, with 0\% and 30\% body weight support on a lower-body positive pressure treadmill. Gastrocnemius medialis fascicle lengths and pennation angles were measured via ultrasonography. Additionally, joint kinematics were analyzed to determine gastrocnemius medialis muscle-tendon unit lengths, consisting of the muscle's contractile and series elastic elements. Series elastic element length was assessed using a muscle-tendon unit model. Depending on whether data were normally distributed, a paired t-test or Wilcoxon signed rank test was performed to determine if body weight supported walking had any effects on joint kinematics and fascicle-series elastic element behavior. Walking with 30\% body weight support had no statistically significant effect on joint kinematics and peak series elastic element length. Furthermore, at the time when peak series elastic element length was achieved, and on average across the entire stance phase, muscle-tendon unit length, fascicle length, pennation angle, and fascicle velocity were unchanged with respect to body weight support. In accordance with unchanged gait kinematics, preservation of fascicle-series elastic element behavior was observed during walking with 30\% body weight support, which suggests transferability of gait patterns to subsequent unsupported walking.},
  language  = {en}
}
@masterthesis{Thomaschik2021,
  type      = {Bachelor Thesis},
  author    = {Thomaschik, Annika},
  title     = {Medical Design for Kids: Integration der Bed{\"u}rfnisse von Kindern in medizinische Produkte},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {122 Seiten},
  year      = {2021},
  abstract  = {Kinder im Kontext von medizinischen Einrichtungen. Kinder sind keine kleinen Erwachsenen und erfordern einen auf sie angepassten Zugang zu medizinischen Behandlungsabl{\"a}ufen. Das Konzept basiert auf dem Gestaltungsprinzip des „Child Centered Design" mit Befragungen von Experten der P{\"a}diatrie und Forschung sowie mit enger Zusammenarbeit mit Kindern. Entstanden ist ein Produkt welches Skepsis und Angst junger Patienten im Alter von 6 bis 14 Jahren bei station{\"a}ren Aufenthalten in Krankenh{\"a}usern mindert und ihren Heilungsprozess positiv unterst{\"u}tzt. Unter Einbezug von digitalen M{\"o}glichkeiten wie Augmented Reality erkl{\"a}rt „ViU", ein Krankenhaus-Companion in Eulen-Optik, den kleinen Patienten Funktionen und das Wirken verschiedenster medizinischer Ger{\"a}te und Behandlungen. So wird nicht nur der Rate an Traumata durch Krankenhausaufenthalte bei Kindern entgegengewirkt, sondern auch das Krankenhauspersonal im Umgang mit Kindern im Klinikalltag entlastet.},
  language  = {de}
}
@misc{Golland2021,
  author    = {Golland, Alexander},
  title     = {Rezension zu: Voskamp, Kipker - Sozialdatenschutz in der Praxis (2021)},
  series = {DSB Datenschutz-Berater},
  volume    = {45},
  journal   = {DSB Datenschutz-Berater},
  number    = {7-8},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  issn      = {0170-7256},
  pages     = {239 -- 240},
  year      = {2021},
  language  = {de}
}
@article{Golland2021,
  author    = {Golland, Alexander},
  title     = {Anforderungen an Transfer Impact Assessments bei Datentransfers in unsichere Drittl{\"a}nder},
  series = {DSB Datenschutz-Berater},
  volume    = {45},
  journal   = {DSB Datenschutz-Berater},
  number    = {7-8},
  publisher = {DFV Mediengruppe},
  address   = {Frankfurt a.M.},
  isbn      = {0170-7256},
  pages     = {229 -- 231},
  year      = {2021},
  language  = {de}
}
@article{BergsMonakhovaDiehletal.2021,
  author    = {Bergs, Michel and Monakhova, Yulia and Diehl, Bernd W. and Konow, Christopher and V{\"o}lkering, Georg and Pude, Ralf and Schulze, Margit},
  title     = {Lignins isolated via catalyst-free organosolv pulping from Miscanthus x giganteus, M. sinensis, M. robustus and M. nagara: a comparative study},
  series = {Molecules},
  volume    = {26},
  journal   = {Molecules},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1420-3049},
  doi       = {10.3390/molecules26040842},
  year      = {2021},
  abstract  = {As a low-input crop, Miscanthus offers numerous advantages that, in addition to agricultural applications, permits its exploitation for energy, fuel, and material production. Depending on the Miscanthus genotype, season, and harvest time as well as plant component (leaf versus stem), correlations between structure and properties of the corresponding isolated lignins differ. Here, a comparative study is presented between lignins isolated from M. x giganteus, M. sinensis, M. robustus and M. nagara using a catalyst-free organosolv pulping process. The lignins from different plant constituents are also compared regarding their similarities and differences regarding monolignol ratio and important linkages. Results showed that the plant genotype has the weakest influence on monolignol content and interunit linkages. In contrast, structural differences are more significant among lignins of different harvest time and/or season. Analyses were performed using fast and simple methods such as nuclear magnetic resonance (NMR) spectroscopy. Data was assigned to four different linkages (A: β-O-4 linkage, B: phenylcoumaran, C: resinol, D: β-unsaturated ester). In conclusion, A content is particularly high in leaf-derived lignins at just under 70\% and significantly lower in stem and mixture lignins at around 60\% and almost 65\%. The second most common linkage pattern is D in all isolated lignins, the proportion of which is also strongly dependent on the crop portion. Both stem and mixture lignins, have a relatively high share of approximately 20\% or more (maximum is M. sinensis Sin2 with over 30\%). In the leaf-derived lignins, the proportions are significantly lower on average. Stem samples should be chosen if the highest possible lignin content is desired, specifically from the M. x giganteus genotype, which revealed lignin contents up to 27\%. Due to the better frost resistance and higher stem stability, M. nagara offers some advantages compared to M. x giganteus. Miscanthus crops are shown to be very attractive lignocellulose feedstock (LCF) for second generation biorefineries and lignin generation in Europe.},
  language  = {en}
}
@inproceedings{MohanGrossMenzeletal.2021,
  author    = {Mohan, Nijanthan and Groß, Rolf Fritz and Menzel, Karsten and Theis, Fabian},
  title     = {Opportunities and Challenges in the Implementation of Building Information Modeling for Prefabrication of Heating, Ventilation and Air Conditioning Systems in Small and Medium-Sized Contracting Companies in Germany - A Case Study},
  series = {WIT Transactions on The Built Environment, Vol. 205},
  booktitle = {WIT Transactions on The Built Environment, Vol. 205},
  publisher = {WIT Press},
  address   = {Southampton},
  issn      = {1743-3509},
  doi       = {10.2495/BIM210101},
  pages     = {117 -- 126},
  year      = {2021},
  abstract  = {Even though BIM (Building Information Modelling) is successfully implemented in most of the world, it is still in the early stages in Germany, since the stakeholders are sceptical of its reliability and efficiency. The purpose of this paper is to analyse the opportunities and obstacles to implementing BIM for prefabrication. Among all other advantages of BIM, prefabrication is chosen for this paper because it plays a vital role in creating an impact on the time and cost factors of a construction project. The project stakeholders and participants can explicitly observe the positive impact of prefabrication, which enables the breakthrough of the scepticism factor among the small-scale construction companies. The analysis consists of the development of a process workflow for implementing prefabrication in building construction followed by a practical approach, which was executed with two case studies. It was planned in such a way that, the first case study gives a first-hand experience for the workers at the site on the BIM model so that they can make much use of the created BIM model, which is a better representation compared to the traditional 2D plan. The main aim of the first case study is to create a belief in the implementation of BIM Models, which was succeeded by the execution of offshore prefabrication in the second case study. Based on the case studies, the time analysis was made and it is inferred that the implementation of BIM for prefabrication can reduce construction time, ensures minimal wastes, better accuracy, less problem-solving at the construction site. It was observed that this process requires more planning time, better communication between different disciplines, which was the major obstacle for successful implementation. This paper was carried out from the perspective of small and medium-sized mechanical contracting companies for the private building sector in Germany.},
  language  = {en}
}
@article{BurgerRumpfDoetal.2021,
  author    = {Burger, Ren{\´e} and Rumpf, Jessica and Do, Xuan Tung and Monakhova, Yulia and Diehl, Bernd W. K. and Rehahn, Matthias and Schulze, Margit},
  title     = {Is NMR combined with multivariate regression applicable for the molecular weight determination of randomly cross-linked polymers such as lignin?},
  series = {ACS Omega},
  volume    = {6},
  journal   = {ACS Omega},
  number    = {44},
  publisher = {ACS Publications},
  address   = {Washington, DC},
  issn      = {2470-1343},
  doi       = {10.1021/acsomega.1c03574},
  pages     = {29516 -- 29524},
  year      = {2021},
  abstract  = {The molecular weight properties of lignins are one of the key elements that need to be analyzed for a successful industrial application of these promising biopolymers. In this study, the use of 1H NMR as well as diffusion-ordered spectroscopy (DOSY NMR), combined with multivariate regression methods, was investigated for the determination of the molecular weight (Mw and Mn) and the polydispersity of organosolv lignins (n = 53, Miscanthus x giganteus, Paulownia tomentosa, and Silphium perfoliatum). The suitability of the models was demonstrated by cross validation (CV) as well as by an independent validation set of samples from different biomass origins (beech wood and wheat straw). CV errors of ca. 7-9 and 14-16\% were achieved for all parameters with the models from the 1H NMR spectra and the DOSY NMR data, respectively. The prediction errors for the validation samples were in a similar range for the partial least squares model from the 1H NMR data and for a multiple linear regression using the DOSY NMR data. The results indicate the usefulness of NMR measurements combined with multivariate regression methods as a potential alternative to more time-consuming methods such as gel permeation chromatography.},
  language  = {en}
}
@article{MonakhovaDiehl2021,
  author    = {Monakhova, Yulia and Diehl, Bernd W. K.},
  title     = {Simplification of NMR Workflows by Standardization Using 2H Integral of Deuterated Solvent as Applied to Aloe vera Preparations},
  series = {Applied Magnetic Resonance},
  volume    = {52},
  journal   = {Applied Magnetic Resonance},
  number    = {11},
  publisher = {Springer},
  address   = {Cham},
  issn      = {1613-7507},
  doi       = {10.1007/s00723-021-01393-4},
  pages     = {1591 -- 1600},
  year      = {2021},
  abstract  = {In this study, a recently proposed NMR standardization approach by 2H integral of deuterated solvent for quantitative multicomponent analysis of complex mixtures is presented. As a proof of principle, the existing NMR routine for the analysis of Aloe vera products was modified. Instead of using absolute integrals of targeted compounds and internal standard (nicotinamide) from 1H-NMR spectra, quantification was performed based on the ratio of a particular 1H-NMR compound integral and 2H-NMR signal of deuterated solvent D2O. Validation characteristics (linearity, repeatability, accuracy) were evaluated and the results showed that the method has the same precision as internal standardization in case of multicomponent screening. Moreover, a dehydration process by freeze drying is not necessary for the new routine. Now, our NMR profiling of A. vera products needs only limited sample preparation and data processing. The new standardization methodology provides an appealing alternative for multicomponent NMR screening. In general, this novel approach, using standardization by 2H integral, benefits from reduced sample preparation steps and uncertainties, and is recommended in different application areas (purity determination, forensics, pharmaceutical analysis, etc.).},
  language  = {en}
}
@article{BurmistrovaSobolevaMonakhova2021,
  author    = {Burmistrova, Natalia A. and Soboleva, Polina M. and Monakhova, Yulia},
  title     = {Is infrared spectroscopy combined with multivariate analysis a promising tool for heparin authentication?},
  series = {Journal of Pharmaceutical and Biomedical Analysis},
  volume    = {194},
  journal   = {Journal of Pharmaceutical and Biomedical Analysis},
  number    = {Article number: 113811},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0731-7085},
  doi       = {10.1016/j.jpba.2020.113811},
  year      = {2021},
  abstract  = {The investigation of the possibility to determine various characteristics of powder heparin (n = 115) was carried out with infrared spectroscopy. The evaluation of heparin samples included several parameters such as purity grade, distributing company, animal source as well as heparin species (i.e. Na-heparin, Ca-heparin, and heparinoids). Multivariate analysis using principal component analysis (PCA), soft independent modelling of class analogy (SIMCA), and partial least squares - discriminant analysis (PLS-DA) were applied for the modelling of spectral data. Different pre-processing methods were applied to IR spectral data; multiplicative scatter correction (MSC) was chosen as the most relevant. Obtained results were confirmed by nuclear magnetic resonance (NMR) spectroscopy. Good predictive ability of this approach demonstrates the potential of IR spectroscopy and chemometrics for screening of heparin quality. This approach, however, is designed as a screening tool and is not considered as a replacement for either of the methods required by USP and FDA.},
  language  = {en}
}
@masterthesis{Paulzen2021,
  type      = {Bachelor Thesis},
  author    = {Paulzen, Lena},
  title     = {Nachhaltiges Corporate Packaging Design: Am Beispiel von Naturkosmetik Produkten.},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {124 Seiten},
  year      = {2021},
  abstract  = {Diese Bachelorarbeit widmet sich dem nachhaltigen Packaging-Design von Kosmetikprodukten. Dies wird am Beispiel eines Naturkosmetik-Unternehmens dargestellt. Die Gestaltung einer Shampoo-Flasche wird in dem vorliegenden Projekt exemplarisch f{\"u}r die thematische und gestalterische Untersuchung genutzt. Zudem wurden mit Tube und Tiegel noch zwei weitere Verpackungsformen erstellt. Das Ziel dieser Arbeit ist es, eine nachhaltige Verpackung zu gestalten. Diese soll den hohen CO2-Ausstoß bei der Herstellung von Verpackungen verringern und dabei dem Anspruch des Marketings gerecht werden. Hierbei wurde ein Logo-Design, ein Farbkonzept, eine einheitliche Formsprache und eine Typografie erarbeitet.},
  language  = {de}
}
@masterthesis{Wahlefeld2021,
  type      = {Bachelor Thesis},
  author    = {Wahlefeld, Leon},
  title     = {Generative Gestaltung: wie eine Herangehensweise die Zukunft des Designs revolutionieren k{\"o}nnte.},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {188 Seiten},
  year      = {2021},
  abstract  = {Diese Bachelorarbeit setzt sich mit der „Generativen Gestaltung" und ihren M{\"o}glichkeiten f{\"u}r Gestaltende auseinander. Die automatisierte Bearbeitung eines gestalterischen Projektes soll vorrangig Vorteile beim Arbeiten mit großen Datenmengen bieten. Ziel war es, eine Plakatreihe zu entwerfen, die auf der Grundlage eines Codes - also eines strikten Regelwerks - basiert. Mithilfe dieses Verfahrens kann auf Knopfdruck eine beliebige Menge an Plakaten generiert werden. Durch die Festlegung bestimmter Parameter innerhalb des Codes wird gew{\"a}hrleistet, dass jedes ausgespielte Plakat anders ist als sein Vorg{\"a}nger. Diese Arbeit dient als eine erste anskizzierte Grundlage daf{\"u}r, wie grafischer Output automatisiert und vor allem aktualisiert generiert werden kann. Dieses Prinzip kann auf eine Vielzahl von Inhalten und Umsetzungen angewendet werden.},
  language  = {de}
}
@masterthesis{Schmitz2021,
  type      = {Bachelor Thesis},
  author    = {Schmitz, Jennifer},
  title     = {Inklusives Design: Multisensorisches Branding f{\"u}r sehbehinderte, blinde und sehende Menschen},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {77 Seiten},
  year      = {2021},
  abstract  = {Multisensorisches Branding bezeichnet die Gestaltung f{\"u}r mindestens zwei Sinne. Diese Bachelorarbeit beinhaltet daher ein Konzept, um sehbehinderten Menschen und Blinden das Branding einer Marke im Bereich der Bekleidungsindustrie zug{\"a}nglich zu machen. Durch die gezielte Kombination von Haptik und Optik ist im Rahmen dieser Arbeit eine Bekleidungsmarke entstanden, deren Textilien jegliche Informationen f{\"u}r sehbehinderte und blinde Menschen enthalten, ohne dabei auf eine ansprechende Optik f{\"u}r Sehende zu verzichten. Vor allem durch neu entwickelte Open Source Symbole, die f{\"u}hlbar sind, und einen Barcode wird Betroffenen in Zukunft der Kauf von Bekleidung sowie der Waschvorgang erleichtert.},
  language  = {de}
}
@masterthesis{BaesslerKleinkunen2021,
  type      = {Bachelor Thesis},
  author    = {Baeßler, Franziska and Kleinkunen, Tristan},
  title     = {MOBI: zukunftsorientiertes modulares Baukastensystem f{\"u}r Bibliotheken},
  publisher = {FH Aachen},
  address   = {Aachen},
  school      = {Fachhochschule Aachen},
  pages     = {209 Seiten},
  year      = {2021},
  abstract  = {Das Ziel des Bibliothekskonzeptes ist es, Hybridbibliotheken als Symbiose aus zukunftsweisender Medientechnologie und klassischer Funktionalit{\"a}t in Modulbauweise in Bestandsarchitektur zu integrieren. Der L{\"o}sungsansatz liegt in einer kosteng{\"u}nstigen dynamischen Modularit{\"a}t, welche als Plug-In, Add-On, Single oder Mobilkonzept nutzbar ist. Das modulare System setzt hierbei auf Grundmodule, welche f{\"u}r unterschiedlichste r{\"a}umliche Gegebenheiten skaliert werden k{\"o}nnen. Somit k{\"o}nnen Einrichtungen neue Funktionalit{\"a}ten integrieren oder auf tempor{\"a}re Anforderungen strategisch reagieren. Durch die einfache Montage und Transportf{\"a}higkeit lassen sich sehr schnell zeitbegrenzte oder dauerhafte Raumkonzepte umsetzen. Das System nimmt die Dynamik des sich ver{\"a}ndernden Bedarfs auf und passt sich flexibel den Zielgruppen an, was im Gegensatz dazu bei statischen Systemen nicht der Fall ist.},
  language  = {de}
}