@article{HuckPoghossianBaeckeretal.2015,
  author    = {Huck, Christina and Poghossian, Arshak and B{\"a}cker, Matthias and Reisert, Steffen and Kramer, Friederike and Begoyan, Vardges K. and Buniatyan, Vahe V. and Sch{\"o}ning, Michael Josef},
  title     = {Multi-parameter sensing using high-k oxide of barium strontium titanate},
  series = {Physica status solidi (a)},
  volume    = {212},
  journal   = {Physica status solidi (a)},
  number    = {6},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201431911},
  pages     = {1259},
  year      = {2015},
  abstract  = {High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.},
  language  = {en}
}
@article{MulhernBialonskiKantz2015,
  author    = {Mulhern, Colm and Bialonski, Stephan and Kantz, Holger},
  title     = {Extreme events due to localization of energy},
  series = {Physical Review E},
  volume    = {91},
  journal   = {Physical Review E},
  number    = {1},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.91.012918},
  pages     = {012918},
  year      = {2015},
  language  = {en}
}
@book{Kurz2015,
  author    = {Kurz, Melanie},
  title     = {Handwerk oder Design : zur {\"A}sthetik des Handgemachten},
  publisher = {Fink},
  address   = {Paderborn},
  isbn      = {978-3-7705-5943-5 (Druckausgabe)},
  doi       = {10.30965/9783846759431},
  pages     = {280 Seiten},
  year      = {2015},
  abstract  = {Manuelle Herstellung ist sozial fair, {\"o}kologisch nachhaltig und schafft qualit{\"a}tsvolle Erzeugnisse! Vorbote f{\"u}r eine großformatige R{\"u}ckkehr zum Handwerk und zur eigenh{\"a}ndigen Fertigung ist die Maker-Bewegung! - Solche Thesen begegnen uns gegenw{\"a}rtig oft. Journalistische Texte, Filmdokumentationen, Werbung oder die {\"A}sthetik von Produkten sind ihre Vehikel. Doch wie ist es um die Wiederbelebung des Handwerks tats{\"a}chlich bestellt? Und in welchem Verh{\"a}ltnis steht das Design - ein durch und durch industriebasiertes Berufsfeld - zu vorindustriellen Produktionsweisen? Diesen Fragen geht das vorliegende Buch ebenso auf den Grund wie der seit Beginn der Industrialisierung auftretenden Handwerksromantik. Es untersucht zudem, wie aktuelles Design die Sehnsucht nach dem Urspr{\"u}nglichen mit formalen Kodes beantwortet und wie die visuellen Erscheinungsformen des Handgemachten ihre Wirkung freisetzen.},
  language  = {de}
}
@article{BialonskiAnsmannKantz2015,
  author    = {Bialonski, Stephan and Ansmann, Gerrit and Kantz, Holger},
  title     = {Data-driven prediction and prevention of extreme events in a spatially extended excitable system},
  series = {Physical Review E},
  volume    = {92},
  journal   = {Physical Review E},
  number    = {4},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.92.042910},
  pages     = {042910},
  year      = {2015},
  language  = {en}
}
@article{WiesenTippkoetterMuffleretal.2015,
  author    = {Wiesen, Sebastian and Tippk{\"o}tter, Nils and Muffler, Kai and Suck, Kirstin and Sohling, Ulrich and Ruf, Friedrich and Ulber, Roland},
  title     = {Adsorption of fatty acids to layered double hydroxides in aqueous systems},
  series = {Adsorption},
  volume    = {21},
  journal   = {Adsorption},
  number    = {6-7},
  publisher = {Springer},
  address   = {Berlin},
  pages     = {459 -- 466},
  year      = {2015},
  abstract  = {Due to their anion exchange characteristics, layered double hydroxides (LDHs) are suitable for the detoxification of aqueous, fatty acid containing fermentation substrates. The aim of this study is to examine the adsorption mechanism, using crude glycerol from plant oil esterification as a model system. Changes in the intercalation structure in relation to the amount of fatty acids adsorbed are monitored by X-ray diffraction and infra-red spectroscopy. Additionally, calcination of LDH is investigated in order to increase the binding capacity for fatty acids. Our data propose that, at ambient temperature, fatty acids can be bound to the hydrotalcite by adsorption or in addition by intercalation, depending on fatty acid concentration. The adsorption of fatty acids from crude glycerol shows a BET-like behavior. Above a fatty acid concentration of 3.5 g L-1, intercalation of fatty acids can be shown by the appearance of an increased interlayer spacing. This observation suggests a two phase adsorption process. Calcination of LDHs allows increasing the binding capacity for fatty acids by more than six times, mainly by reduction of structural CO32-.},
  language  = {en}
}
@article{HoughNalwalkDingetal.2015,
  author    = {Hough, Lindsay B. and Nalwalk, Julia W. and Ding, Xinxin and Scheer, Nico},
  title     = {Opioid Analgesia in P450 Gene Cluster Knockout Mice: A Search for Analgesia-Relevant Isoforms},
  series = {Drug Metabolism and Disposition},
  volume    = {43},
  journal   = {Drug Metabolism and Disposition},
  number    = {9},
  issn      = {1521-009x},
  doi       = {10.1124/dmd.115.065490},
  pages     = {1326 -- 1330},
  year      = {2015},
  language  = {en}
}
@article{BaringhausGaigall2015,
  author    = {Baringhaus, Ludwig and Gaigall, Daniel},
  title     = {On an independence test approach to the goodness-of-fit problem},
  series = {Journal of Multivariate Analysis},
  volume    = {2015},
  journal   = {Journal of Multivariate Analysis},
  number    = {140},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0047-259X},
  doi       = {10.1016/j.jmva.2015.05.013},
  pages     = {193 -- 208},
  year      = {2015},
  abstract  = {Let X₁,…,Xₙ be independent and identically distributed random variables with distribution F. Assuming that there are measurable functions f:R²→R and g:R²→R characterizing a family F of distributions on the Borel sets of R in the way that the random variables f(X₁,X₂),g(X₁,X₂) are independent, if and only if F∈F, we propose to treat the testing problem H:F∈F,K:F∉F by applying a consistent nonparametric independence test to the bivariate sample variables (f(Xᵢ,Xⱼ),g(Xᵢ,Xⱼ)),1⩽i,j⩽n,i≠j. A parametric bootstrap procedure needed to get critical values is shown to work. The consistency of the test is discussed. The power performance of the procedure is compared with that of the classical tests of Kolmogorov-Smirnov and Cram{\´e}r-von Mises in the special cases where F is the family of gamma distributions or the family of inverse Gaussian distributions.},
  language  = {en}
}
@article{KlingeOttoMuehl2015,
  author    = {Klinge, Uwe and Otto, Jens and M{\"u}hl, Thomas},
  title     = {High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain},
  series = {BioMed Research International},
  volume    = {2015},
  journal   = {BioMed Research International},
  issn      = {2314-6133 (Print)},
  doi       = {10.1155/2015/953209},
  pages     = {7 pages},
  year      = {2015},
  language  = {en}
}
@article{Helmig2015,
  author    = {Helmig, Ilka},
  title     = {A few (hi)stories about french illustration},
  series = {Slanted},
  journal   = {Slanted},
  number    = {25 (Paris)},
  publisher = {Slanted Publishers},
  address   = {Karlsruhe},
  issn      = {1867-6510},
  pages     = {210 -- 217},
  year      = {2015},
  language  = {en}
}
@inproceedings{KremersPieper2015,
  author    = {Kremers, Alexander and Pieper, Martin},
  title     = {Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software},
  series = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  booktitle = {COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France},
  publisher = {COMSOL},
  address   = {G{\"o}ttingen ; Berlin},
  pages     = {6 Seiten},
  year      = {2015},
  language  = {en}
}
@article{JensKaldenhoffKirschnerHermannsetal.2014,
  author    = {Jens, Otto and Kaldenhoff, E. and Kirschner-Hermanns, R. and M{\"u}hl, Thomas and Klinge, Uwe},
  title     = {Elongation of textile pelvic floor implants under load is related to complete loss of effective porosity, thereby favoring incorporation in scar plates},
  series = {Journal of biomedical materials research. Part A},
  volume    = {102},
  journal   = {Journal of biomedical materials research. Part A},
  number    = {4},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1552-4965},
  doi       = {10.1002/jbm.a.34767},
  pages     = {1079 -- 1084},
  year      = {2014},
  abstract  = {Use of textile structures for reinforcement of pelvic floor structures has to consider mechanical forces to the implant, which are quite different to the tension free conditions of the abdominal wall. Thus, biomechanical analysis of textile devices has to include the impact of strain on stretchability and effective porosity. Prolift® and Prolift + M®, developed for tension free conditions, were tested by measuring stretchability and effective porosity applying mechanical strain. For comparison, we used Dynamesh-PR4®, which was designed for pelvic floor repair to withstand mechanical strain. Prolift® at rest showed moderate porosity with little stretchability but complete loss of effective porosity at strain of 4.9 N/cm. Prolift + M® revealed an increased porosity at rest, but at strain showed high stretchability, with subsequent loss of effective porosity at strain of 2.5 N/cm. Dynamesh PR4® preserved its high porosity even under strain, but as consequence of limited stretchability. Though in tension free conditions Prolift® and Prolift + M® can be considered as large pore class I meshes, application of mechanical strain rapidly lead to collapse of pores. The loss of porosity at mechanical stress can be prevented by constructions with high structural stability. Assessment of porosity under strain was found helpful to define requirements for pelvic floor devices. Clinical studies have to prove whether devices with high porosity as well as high structural stability can improve the patients' outcome.},
  language  = {en}
}
@article{WincklerKruegerSchnitzleretal.2014,
  author    = {Winckler, Silvia and Krueger, Rolf and Schnitzler, Thomas and Zang, Werner and Fischer, Rainer and Biselli, Manfred},
  title     = {A sensitive monitoring system for mammalian cell cultivation processes: a PAT approach},
  series = {Bioprocess and biosystems engineering},
  volume    = {37},
  journal   = {Bioprocess and biosystems engineering},
  number    = {5},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  issn      = {1615-7591 (Print) 1615-7605 (Online)},
  doi       = {10.1007/s00449-013-1062-8},
  pages     = {901 -- 912},
  year      = {2014},
  abstract  = {Biopharmaceuticals such as antibodies are produced in cultivated mammalian cells, which must be monitored to comply with good manufacturing practice. We, therefore, developed a fully automated system comprising a specific exhaust gas analyzer, inline analytics and a corresponding algorithm to precisely determine the oxygen uptake rate, carbon dioxide evolution rate, carbon dioxide transfer rate, transfer quotient and respiratory quotient without interrupting the ongoing cultivation, in order to assess its reproducibility. The system was verified using chemical simulation experiments and was able to measure the respiratory activity of hybridoma cells and DG44 cells (derived from Chinese hamster ovary cells) with satisfactory results at a minimum viable cell density of ~2.0 × 10⁵ cells ml⁻¹. The system was suitable for both batch and fed-batch cultivations in bubble-aerated and membrane-aerated reactors, with and without the control of pH and dissolved oxygen.},
  language  = {en}
}
@article{BandodkarMolinnusMirzaetal.2014,
  author    = {Bandodkar, Amay J. and Molinnus, Denise and Mirza, Omar and Guinovart, Tomas and Windmiller, Joshua R. and Valdes-Ramirez, Gabriela and Andrade, Francisco J. and Sch{\"o}ning, Michael Josef and Wang, Joseph},
  title     = {Epidermal tattoo potentiometric sodium sensors with wireless signal transduction for continuous non-invasive sweat monitoring},
  series = {Biosensors and bioelectronics},
  volume    = {54},
  journal   = {Biosensors and bioelectronics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-4235 (E-Journal); 0956-5663 (Print)},
  doi       = {10.1016/j.bios.2013.11.039},
  pages     = {603 -- 609},
  year      = {2014},
  abstract  = {This article describes the fabrication, characterization and application of an epidermal temporary-transfer tattoo-based potentiometric sensor, coupled with a miniaturized wearable wireless transceiver, for real-time monitoring of sodium in the human perspiration. Sodium excreted during perspiration is an excellent marker for electrolyte imbalance and provides valuable information regarding an individual's physical and mental wellbeing. The realization of the new skin-worn non-invasive tattoo-like sensing device has been realized by amalgamating several state-of-the-art thick film, laser printing, solid-state potentiometry, fluidics and wireless technologies. The resulting tattoo-based potentiometric sodium sensor displays a rapid near-Nernstian response with negligible carryover effects, and good resiliency against various mechanical deformations experienced by the human epidermis. On-body testing of the tattoo sensor coupled to a wireless transceiver during exercise activity demonstrated its ability to continuously monitor sweat sodium dynamics. The real-time sweat sodium concentration was transmitted wirelessly via a body-worn transceiver from the sodium tattoo sensor to a notebook while the subjects perspired on a stationary cycle. The favorable analytical performance along with the wearable nature of the wireless transceiver makes the new epidermal potentiometric sensing system attractive for continuous monitoring the sodium dynamics in human perspiration during diverse activities relevant to the healthcare, fitness, military, healthcare and skin-care domains.},
  language  = {en}
}
@article{Dikta2014,
  author    = {Dikta, Gerhard},
  title     = {Asymptotically efficient estimation under semi-parametric random censorship models},
  series = {Journal of multivariate analysis},
  volume    = {124},
  journal   = {Journal of multivariate analysis},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1095-7243 (E-Journal); 0047-259X (Print)},
  doi       = {10.1016/j.jmva.2013.10.002},
  pages     = {10 -- 24},
  year      = {2014},
  abstract  = {We study the estimation of some linear functionals which are based on an unknown lifetime distribution. The observations are assumed to be generated under the semi-parametric random censorship model (SRCM), that is, a random censorship model where the conditional expectation of the censoring indicator given the observation belongs to a parametric family. Under this setup a semi-parametric estimator of the survival function was introduced by the author. If the parametric model assumption is correct, it is known that the estimated functional which is based on this semi-parametric estimator is asymptotically at least as efficient as the corresponding one which rests on the nonparametric Kaplan-Meier estimator. In this paper we show that the estimated functional which is based on this semi-parametric estimator is asymptotically efficient with respect to the class of all regular estimators under this semi-parametric model.},
  language  = {en}
}
@article{HeinzeMangPeteretal.2014,
  author    = {Heinze, Daniel and Mang, Thomas and Peter, Karin and M{\"o}ller, Martin and Weichold, Oliver},
  title     = {Synthesis of low molecular weight poly(vinyl acetate) and its application as plasticizer},
  series = {Journal of applied polymer science},
  volume    = {131},
  journal   = {Journal of applied polymer science},
  number    = {9},
  publisher = {Wiley},
  address   = {New York},
  issn      = {1097-4628 (E-Journal); 0021-8995 (Print)},
  doi       = {10.1002/app.40226},
  pages     = {Article No. 40226},
  year      = {2014},
  abstract  = {Poly(vinyl acetate), PVAc, with a degree of polymerization Xn = 10 was prepared by chain-transfer radical polymerization using carbon tetrachloride and used as oligomeric plasticizer for commercial PVAc. However, the chlorinated chain ends cause a low thermal stability requiring mild Cl/H substitution. The product exhibits high thermal stability and excellent melt-compounding properties. Blends of oligomeric and commercial PVAc show single glass transition temperatures which decrease with higher oligomer content and exhibit small negative deviations from Fox' linear additivity rule. This indicates plasticization and miscibility being mainly due to entropic effects. Injection-moulded thick specimens show ductile behaviour at oligomer contents >10 wt \%, while sheets with a thickness of 0.2-0.5 mm appear flexible already at 7.5 wt \%. The oxygen permeability coefficients are an order of magnitude lower than those of low-density polyethylene. Due to the sum of their properties, the plasticized sheets present a promising alternative in the preparation of barrier materials.},
  language  = {en}
}
@book{BirleKleinMueller2014,
  author    = {Birle, J{\"u}rgen P. and Klein, Hartmut and M{\"u}ller, Thomas},
  title     = {Praxishandbuch der GmbH : Gesellschafts- und Steuerrecht},
  edition   = {3. Aufl.},
  publisher = {NWB-Verl.},
  address   = {Herne},
  isbn      = {978-3-482-56963-0},
  pages     = {1105 S.},
  year      = {2014},
  language  = {de}
}
@book{MuellerStoeckerLieber2014,
  author    = {M{\"u}ller, Thomas and St{\"o}cker, Ernst E. and Lieber, Bettina},
  title     = {Die Organschaft : K{\"o}rperschaftsteuerrecht, Gewerbesteuerrecht, Umsatzsteuerrecht, Grunderwerbsteuerrecht},
  edition   = {9. Aufl.},
  publisher = {NWB-Verl.},
  address   = {Herne},
  isbn      = {978-3-482-44609-2},
  pages     = {544 S.},
  year      = {2014},
  language  = {de}
}
@article{WangDruckenmuellerElbersetal.2014,
  author    = {Wang, Ren-Qi and Druckenm{\"u}ller, Katharina and Elbers, Gereon and Guenther, Klaus and Crou{\´e}, Jean-Philippe},
  title     = {Analysis of aquatic-phase natural organic matter by optimized LDI-MS method},
  series = {Journal of mass spectrometry},
  volume    = {49},
  journal   = {Journal of mass spectrometry},
  number    = {2},
  publisher = {Wiley},
  address   = {Bognor Regis},
  issn      = {1096-9888},
  doi       = {10.1002/jms.3321},
  pages     = {154 -- 160},
  year      = {2014},
  abstract  = {The composition and physiochemical properties of aquatic-phase natural organic matter (NOM) are most important problems for both environmental studies and water industry. Laser desorption/ionization (LDI) mass spectrometry facilitated successful examinations of NOM, as humic and fulvic acids in NOM are readily ionized by the nitrogen laser. In this study, hydrophobic NOMs (HPO NOMs) from river, reservoir and waste water were characterized by this technique. The effect of analytical variables like concentration, solvent composition and laser energy was investigated. The exact masses of small molecular NOM moieties in the range of 200-1200 m/z were determined in reflectron mode. In addition, spectra of post-source-decay experiments in this range showed that some compounds from different natural NOMs had the same fragmental ions. In the large mass range of 1200-15 000 Da, macromolecules and their aggregates were found in HPO NOMs from natural waters. Highly humic HPO exhibited mass peaks larger than 8000 Da. On the other hand, the waste water and reservoir water mainly had relatively smaller molecules of about 2000 Da. The LDI-MS measurements indicated that highly humic river waters were able to form large aggregates and membrane foulants, while the HPO NOMs from waste water and reservoir water were unlikely to form large aggregates. Copyright © 2014 John Wiley \& Sons, Ltd.},
  language  = {en}
}
@book{FredebeulKreinKochKulessaetal.2014,
  author    = {Fredebeul-Krein, Markus and Koch, Walter A. S. and Kulessa, Margareta and Sputek, Agnes},
  title     = {Grundlagen der Wirtschaftspolitik},
  edition   = {4. Aufl.},
  publisher = {UVK Verl.-Ges.},
  address   = {Konstanz [u.a.]},
  isbn      = {978-3-8252-8556-2},
  pages     = {508 S.},
  year      = {2014},
  language  = {de}
}
@article{SawadaNakazawaTakenagaetal.2014,
  author    = {Sawada, Kazuaki and Nakazawa, Hirokazu and Takenaga, Shoko and Hizawa, Takeshi and Futagawa, Masato and Dasai, Fumihiro and Sakurai, Takashi and Okumura, Koichi and Hattori, Toshiaki and Ishida, Makoto},
  title     = {Multimodal bioimage sensor},
  series = {IEICE transactions on fundamentals of electronics, communidations and computer sciences},
  volume    = {E97-A (2014)},
  journal   = {IEICE transactions on fundamentals of electronics, communidations and computer sciences},
  number    = {3},
  publisher = {IEICE},
  address   = {Tokyo},
  issn      = {0916-8508 (Print) ; 1745-1337 (Online)},
  doi       = {10.1587/transfun.E97.A.726},
  pages     = {726 -- 733},
  year      = {2014},
  abstract  = {To visualize the biochemical distribution two-dimensionally, we invented a solid-state-type ion image sensor that indicates the chemical activity of solutions and cells. The device, which consists of a CCD array covered with a functionalized membrane to detect charge accumulation, is highly sensitive to changes in the concentration and two-dimensional distribution of ions and biomaterials.},
  language  = {en}
}