@article{GuoMiyamotoWagneretal.2014,
  author    = {Guo, Yuanyuan and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor for the investigation of the spatial resolution},
  series = {Sensors and actuators B: Chemical},
  volume    = {204},
  journal   = {Sensors and actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-3077 (E-Journal); 0925-4005 (Print)},
  doi       = {10.1016/j.snb.2014.08.016},
  pages     = {659 -- 665},
  year      = {2014},
  abstract  = {As a semiconductor-based electrochemical sensor, the light-addressable potentiometric sensor (LAPS) can realize two dimensional visualization of (bio-)chemical reactions at the sensor surface addressed by localized illumination. Thanks to this imaging capability, various applications in biochemical and biomedical fields are expected, for which the spatial resolution is critically significant. In this study, therefore, the spatial resolution of the LAPS was investigated in detail based on the device simulation. By calculating the spatiotemporal change of the distributions of electrons and holes inside the semiconductor layer in response to a modulated illumination, the photocurrent response as well as the spatial resolution was obtained as a function of various parameters such as the thickness of the Si substrate, the doping concentration, the wavelength and the intensity of illumination. The simulation results verified that both thinning the semiconductor substrate and increasing the doping concentration could improve the spatial resolution, which were in good agreement with known experimental results and theoretical analysis. More importantly, new findings of interests were also obtained. As for the dependence on the wavelength of illumination, it was found that the known dependence was not always the case. When the Si substrate was thick, a longer wavelength resulted in a higher spatial resolution which was known by experiments. When the Si substrate was thin, however, a longer wavelength of light resulted in a lower spatial resolution. This finding was explained as an effect of raised concentration of carriers, which reduced the thickness of the space charge region. The device simulation was found to be helpful to understand the relationship between the spatial resolution and device parameters, to understand the physics behind it, and to optimize the device structure and measurement conditions for realizing higher performance of chemical imaging systems.},
  language  = {en}
}
@article{KhaydukovaZadorozhnayaKirsanovetal.2014,
  author    = {Khaydukova, M. M. and Zadorozhnaya, O. A. and Kirsanov, D. O. and Iken, Heiko and Rolka, David and Sch{\"o}ning, Michael Josef and Babain, V. A. and Vlasov, Yu. G. and Legin, A. V.},
  title     = {Multivariate processing of atomic-force microscopy images for detection of the response of plasticized polymeric membranes},
  series = {Russian journal of applied chemistry},
  volume    = {87},
  journal   = {Russian journal of applied chemistry},
  number    = {3},
  publisher = {Springer},
  address   = {Dordrecht},
  issn      = {1608-3296 (E-Journal); 1070-4272 (Print)},
  doi       = {10.1134/S1070427214030112},
  pages     = {307 -- 314},
  year      = {2014},
  abstract  = {The possibility of using the atomic-force microscopy as a method for detection of the analytical signal from plasticized polymeric sensor membranes was analyzed. The surfaces of cadmium-selective membranes based on two polymeric matrices were examined. The digital images were processed with multivariate image analysis techniques. A correlation was found between the surface profile of an ion-selective membrane and the concentration of the ion in solution.},
  language  = {en}
}
@inproceedings{SchirraWatmuffBauschat2014,
  author    = {Schirra, Julian and Watmuff, Jon and Bauschat, J.-Michael},
  title     = {A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems},
  series = {Advanced aero concepts, design and operations : Applied Aerodynamics Conference : July 22 -24, 2014, Bristol, UK},
  booktitle = {Advanced aero concepts, design and operations : Applied Aerodynamics Conference : July 22 -24, 2014, Bristol, UK},
  organization    = {Applied Aerodynamics Conference <2014, Bristol>},
  pages     = {1 -- 13},
  year      = {2014},
  language  = {en}
}
@inproceedings{WetterKern2014,
  author    = {Wetter, Martin and Kern, Alexander},
  title     = {Number of lightning strikes to tall structures - comparison of calculations and measurements using a modern lightning monitoring system},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {1 -- 7},
  year      = {2014},
  language  = {en}
}
@book{SchneiderSchneider2014,
  author    = {Schneider, Bettina and Schneider, Wilhelm},
  title     = {Jahresabschluss und Jahresabschlussanalyse : systematische Darstellung in {\"U}bersichten. (Reihe Betriebswirtschaftslehre in {\"U}bersichten ; 2)},
  edition   = {5. Aufl., Studienausg.},
  publisher = {Cuvillier},
  address   = {G{\"o}ttingen},
  isbn      = {978-3-95404-828-1},
  pages     = {Getr. Z{\"a}hlung : graph. Darst.},
  year      = {2014},
  language  = {de}
}
@book{Gebhardt2014,
  author    = {Gebhardt, Andreas},
  title     = {3D-Drucken : Grundlagen und Anwendungen des Additive Manufacturing (AM)},
  publisher = {Hanser},
  address   = {M{\"u}nchen},
  isbn      = {978-3-446-44238-2 ; 978-3-446-44237-5},
  pages     = {XIII, 186 S.},
  year      = {2014},
  language  = {de}
}
@article{MuellerHirschfeldLambertzetal.2014,
  author    = {M{\"u}ller, Martin and Hirschfeld, Julian and Lambertz, Rita and Schulze Lohoff, Andreas and Lustfeld, Hans and Pfeifer, Heinz and Reißel, Martin},
  title     = {Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks},
  series = {Journal of power sources},
  volume    = {272},
  journal   = {Journal of power sources},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2755 (E-Journal); 0378-7753 (Print)},
  doi       = {10.1016/j.jpowsour.2014.08.045},
  pages     = {225 -- 232},
  year      = {2014},
  abstract  = {In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.},
  language  = {en}
}
@article{StadlerGarveyEmbsetal.2014,
  author    = {Stadler, Alexander Maximilian and Garvey, Christopher J. and Embs, Jan Peter and Koza, Michael Marek and Unruh, Tobias and Artmann, Gerhard and Zaccai, Guiseppe},
  title     = {Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study},
  series = {Biochimica et biophysica acta (BBA): General Subjects},
  volume    = {1840},
  journal   = {Biochimica et biophysica acta (BBA): General Subjects},
  number    = {10},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-8006 (E-Journal); 0304-4165 (Print)},
  doi       = {10.1016/j.bbagen.2014.06.007},
  pages     = {2989 -- 2999},
  year      = {2014},
  language  = {en}
}
@book{Tietze2014,
  author    = {Tietze, J{\"u}rgen},
  title     = {Einf{\"u}hrung in die angewandte Wirtschaftsmathematik : das praxisnahe Lehrbuch - inklusive Br{\"u}ckenkurs f{\"u}r Einsteiger. - 17. erw. Aufl.},
  edition   = {17., erw. Aufl.},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-658-02361-4 ; 978-3-658-02360-7},
  pages     = {XIV, 680 S. : graph. Darst.},
  year      = {2014},
  language  = {de}
}
@article{MalechaKlubertHeinenFuchs2014,
  author    = {Malecha, Hartmut and Klubert, J. and Heinen-Fuchs, Sabine},
  title     = {Laserscanning passe? 3-D-Oberfl{\"a}chenmodelle aus Bilddaten und deren messtechnischer Nutzen},
  series = {Wasserwirtschaft},
  volume    = {Jg. 104},
  journal   = {Wasserwirtschaft},
  number    = {Nr. 9},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {32 -- 35},
  year      = {2014},
  language  = {de}
}
@inproceedings{FunkeHajAyedKustereretal.2014,
  author    = {Funke, Harald and Haj Ayed, A. and Kusterer, K. and Keinz, Jan and Kazari, M. and Kitajima, J. and Horikawa, A. and Okada, K.},
  title     = {Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle},
  series = {Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : D{\"u}sseldorf, Germany, June 16-20, 2014 ; Vol. 4A)},
  booktitle = {Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : D{\"u}sseldorf, Germany, June 16-20, 2014 ; Vol. 4A)},
  publisher = {ASME},
  address   = {New York, N.Y.},
  isbn      = {978-0-7918-4568-4},
  pages     = {V04AT04A057},
  year      = {2014},
  language  = {en}
}
@inproceedings{PfaffSappler2014,
  author    = {Pfaff, Raphael and Sappler, Magnus},
  title     = {TRANSPACT : die automatische Mittelpufferkupplung f{\"u}r attraktiven G{\"u}terverkehr},
  series = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  booktitle = {RAIL-FREIGHT 2014 : Zukunft des Schieneng{\"u}terverkehrs ; Technologie - {\"O}konomie - {\"O}kologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schieneng{\"u}terverkehr] (Bahntechnik Aktuell ; 48)},
  publisher = {Verl. d. IFV Bahntechnik},
  address   = {Berlin},
  isbn      = {978-3-940727-41-1},
  pages     = {121 -- 128},
  year      = {2014},
  language  = {de}
}
@article{RatkeMilowLisinskietal.2014,
  author    = {Ratke, Lorenz and Milow, Barbara and Lisinski, Susanne and Hoepfner, Sandra},
  title     = {On an effect of fine ceramic particles on the structure of aerogels},
  series = {Microgravity science and technology},
  volume    = {26},
  journal   = {Microgravity science and technology},
  publisher = {Springer Nature},
  address   = {Heidelberg},
  issn      = {0938-0108 ; 1875-0494},
  doi       = {10.1007/s12217-014-9380-2},
  pages     = {103 -- 110},
  year      = {2014},
  language  = {en}
}
@inproceedings{HellmannsFischerDilgeretal.2014,
  author    = {Hellmanns, Mark and Fischer, F. and Dilger, K. and Wittor, B. and Hildebrand, J. and Werner, F.},
  title     = {Applikation und Einsatz von faserverst{\"a}rkten Klebstoffen im Bauwesen abgeschlossenes IGF-Projekt Nr. 16956 B (DVS 08.072, Laufzeit 01.02.2011 - 31.01.2013)},
  series = {Tagungsband / 14. Kolloquium Gemeinsame Forschung in der Klebtechnik : 18. und 19. Februar 2014, DECHEMA-Haus, Frankfurt am Main},
  booktitle = {Tagungsband / 14. Kolloquium Gemeinsame Forschung in der Klebtechnik : 18. und 19. Februar 2014, DECHEMA-Haus, Frankfurt am Main},
  organization    = {DECHEMA, Gesellschaft f{\"u}r Chemische Technik und Biotechnologie},
  pages     = {26 -- 27},
  year      = {2014},
  language  = {de}
}
@inproceedings{RousseauKern2014,
  author    = {Rousseau, Alain and Kern, Alexander},
  title     = {How to deal with environmental risk in IEC 62305-2},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {521 -- 527},
  year      = {2014},
  abstract  = {The 2nd edition of the lightning risk management standard (IEC 62305-2) considers structures, which may endanger environment. In these cases, the loss is not limited to the structure itself, which is valid for usual structures. In the past (Edition 1) this danger was simply taken into account by a special hazard factor, multiplying the existing risk for the structure with a number. Now, in the edition 2, we add to the risk for the structure itself a "second risk" due to the losses outside the structure. The losses outside can be treated independently from what occurs inside. This is a major advantage to analyze the risk for sensitive structures, like chemical plants, nuclear plants, or structures containing explosives, etc. In this paper, the existing procedure given by the European version EN 62305-2 Ed.2 is further developed and applied to a few structures.},
  language  = {en}
}
@inproceedings{KernBraun2014,
  author    = {Kern, Alexander and Braun, Christian},
  title     = {Risk management according to IEC 62305-2 edition 2: 2010-12 assessment of structures with a risk of explosion},
  series = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  booktitle = {2014 International Conference on Lightning Protection (ICLP), Shanghai, China},
  organization    = {International Conference on Lightning Protection <2014, Shanghai>},
  pages     = {1237 -- 1242},
  year      = {2014},
  abstract  = {Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic "Structures with a risk of explosion" in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.},
  language  = {en}
}
@book{Muehl2014,
  author    = {M{\"u}hl, Thomas},
  title     = {Einf{\"u}hrung in die elektrische Messtechnik : Grundlagen, Messverfahren, Anwendungen. - 4. aktualisierte u. erw. Aufl.},
  edition   = {4., aktualisierte u. erw. Aufl.},
  publisher = {Springer},
  address   = {Wiesbaden},
  isbn      = {978-3-8348-2063-1 ; 978-3-8348-0899-8},
  pages     = {XI, 320 S.},
  year      = {2014},
  language  = {de}
}
@article{Balzer2014,
  author    = {Balzer, Hermann},
  title     = {Ausgestaltung und Steuerung des Netzes von Bankbeziehungen - Update nach 25 Jahren mithilfe einer explorativen Unternehmensbefragung / Arbeitskreis Finanzierung der Schmalenbach-Gesellschaft e.V. unter Mitarb. von Prof. Dr. Hermann Balzer...},
  series = {Zfbf : Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  journal   = {Zfbf : Schmalenbachs Zeitschrift f{\"u}r betriebswirtschaftliche Forschung},
  number    = {H. 8},
  publisher = {Springer Gabler},
  address   = {Wiesbaden},
  issn      = {0341-2687},
  pages     = {694 -- 723},
  year      = {2014},
  language  = {de}
}
@article{GuoSekiMiyamotoetal.2014,
  author    = {Guo, Yuanyuan and Seki, Kosuke and Miyamoto, Ko-ichiro and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, Tatsuo},
  title     = {Device simulation of the light-addressable potentiometric sensor with a novel photoexcitation method for a higher spatial resolution},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.369},
  pages     = {456 -- 459},
  year      = {2014},
  abstract  = {A novel photoexcitation method for the light-addressable potentiometric sensor (LAPS) realized a higher spatial resolution of chemical imaging. In this method, a modulated light probe, which generates the alternating photocurrent signal, is surrounded by a ring of constant light, which suppresses the lateral diffusion of photocarriers by enhancing recombination. A device simulation verified that a higher spatial resolution could be obtained by adjusting the gap between the modulated and constant light. It was also found that a higher intensity and a longer wavelength of constant light was more effective. However, there exists a tradeoff between the spatial resolution and the amplitude of the photocurrent, and thus, the signal-to-noise ratio. A tilted incidence of constant light was applied, which could achieve even higher resolution with a smaller loss of photocurrent.},
  language  = {en}
}
@article{MiyamotoSekiWagneretal.2014,
  author    = {Miyamoto, K. and Seki, K. and Wagner, Torsten and Sch{\"o}ning, Michael Josef and Yoshinobu, T.},
  title     = {Enhancement of the spatial resolution of the chemical imaging sensor by a hybrid fiber-optic illumination},
  series = {Procedia Engineering},
  volume    = {87},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2014.11.563},
  pages     = {612 -- 615},
  year      = {2014},
  abstract  = {The chemical imaging sensor, which is based on the principle of the light-addressable potentiometric sensor (LAPS), is a powerful tool to visualize the spatial distribution of chemical species on the sensor surface. The spatial resolution of this sensor depends on the diffusion of photocarriers excited by a modulated light. In this study, a novel hybrid fiber-optic illumination was developed to enhance the spatial resolution. It consists of a modulated light probe to generate a photocurrent signal and a ring of constant light, which suppresses the lateral diffusion of minority carriers excited by the modulated light. It is demonstrated that the spatial resolution was improved from 92 μm to 68 μm.},
  language  = {en}
}