@inproceedings{ZaehlBiewendtWolfetal.2022,
  author    = {Z{\"a}hl, Philipp M. and Biewendt, Marcel and Wolf, Martin R. and Eggert, Mathias},
  title     = {Requirements for competence developing games in the environment of SE Competence Development},
  series = {AKWI-Tagungsband zur 35. AKWI-Jahrestagung},
  booktitle = {AKWI-Tagungsband zur 35. AKWI-Jahrestagung},
  publisher = {GITO},
  address   = {Berlin},
  isbn      = {978-3-95545-409-8},
  doi       = {10.30844/AKWI_2022_05},
  pages     = {73 -- 88},
  year      = {2022},
  abstract  = {Many of today's factors make software development more and more complex, such as time pressure, new technologies, IT security risks, et cetera. Thus, a good preparation of current as well as future software developers in terms of a good software engineering education becomes progressively important. As current research shows, Competence Developing Games (CDGs) and Serious Games can offer a potential solution. This paper identifies the necessary requirements for CDGs to be conducive in principle, but especially in software engineering (SE) education. For this purpose, the current state of research was summarized in the context of a literature review. Afterwards, some of the identified requirements as well as some additional requirements were evaluated by a survey in terms of subjective relevance.},
  language  = {en}
}
@article{ArtmannZerlinDigeletal.2007,
  author    = {Artmann, Gerhard and Zerlin, Kay and Digel, Ilya and Stadler, Andreas M.},
  title     = {Physical discontinuities at body temperature in human red blood cells / Artmann, GM ; Zerlin, K ; Digel, I ; Stadler, A ; Zaccai, G ; Temiz, AA},
  series = {Tissue Engineering. 13 (2007), H. 7},
  journal   = {Tissue Engineering. 13 (2007), H. 7},
  isbn      = {1076-3279},
  pages     = {1778 -- 1778},
  year      = {2007},
  language  = {en}
}
@inproceedings{ButenwegRajan2014,
  author    = {Butenweg, Christoph and Rajan, Sreelakshmy},
  title     = {Design and construction techniques of AAC masonry buildings in earthquakes regions},
  series = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014},
  booktitle = {10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014},
  year      = {2014},
  language  = {en}
}
@inproceedings{GrundmannBieleDachwaldetal.2016,
  author    = {Grundmann, Jan Thimo and Biele, Jens and Dachwald, Bernd and Grimm, Christian and Lange, Caroline and Ulamec, Stephan},
  title     = {Small spacecraft for small solar system body science, planetary defence and applications},
  series = {IEEE Aerospace Conference 2016},
  booktitle = {IEEE Aerospace Conference 2016},
  pages     = {1 -- 20},
  year      = {2016},
  abstract  = {Following the recent successful landings and occasional re-awakenings of PHILAE, the lander carried aboard ROSETTA to comet 67P/Churyumov-Gerasimenko, and the launch of the Mobile Asteroid Surface Scout, MASCOT, aboard the HAYABUSA2 space probe to asteroid (162173) Ryugu we present an overview of the characteristics and peculiarities of small spacecraft missions to small solar system bodies (SSSB). Their main purpose is planetary science which is transitioning from a 'pure' science of observation of the distant to one also supporting in-situ applications relevant for life on Earth. Here we focus on missions at the interface of SSSB science and planetary defence applications. We provide a brief overview of small spacecraft SSSB missions and on this background present recent missions, projects and related studies at the German Aerospace Center, DLR, that contribute to the worldwide planetary defence community. These range from Earth orbit technology demonstrators to active science missions in interplanetary space. We provide a summary of experience from recently flown missions with DLR participation as well as a number of studies. These include PHILAE, the lander of ESA's ROSETTA comet rendezvous mission now on the surface of comet 67P/Churyumov-Gerasimenko, and the Mobile Asteroid Surface Scout, MASCOT, now in cruise to the ~1 km diameter C-type near-Earth asteroid (162173) Ryugu aboard the Japanese sample-return probe HAYABUSA2. We introduce the differences between the conventional methods employed in the design, integration and testing of large spacecraft and the new approaches developed by small spacecraft projects. We expect that the practical experience that can be gained from projects on extremely compressed timelines or with high-intensity operation phases on a newly explored small solar system body can contribute significantly to the study, preparation and realization of future planetary defence related missions. One is AIDA (Asteroid Impact \& Deflection Assessment), a joint effort of ESA, JHU/APL, NASA, OCA and DLR, combining JHU/APL's DART (Double Asteroid Redirection Test) and ESA's AIM (Asteroid Impact Monitor) spacecraft in a mission towards near-Earth binary asteroid system (65803) Didymos. DLR is currently applying MASCOT heritage and lessons learned to the design of MASCOT2, a lander for the AIM mission to support a bistatic low frequency radar experiment with PHILAE/ROSETTA CONSERT heritage to explore the inner structure of Didymoon which is the designated impact target for DART.},
  language  = {en}
}
@article{ButenwegKubalskiElDeibetal.2021,
  author    = {Butenweg, Christoph and Kubalski, Thomas and El-Deib, Khaled and Gellert, Christoph},
  title     = {Erdbebennachweis von Mauerwerksbauten nach DIN EN 1998-1/NA-2021},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {98},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {11},
  editor    = {Jesse, Dirk},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-0999},
  doi       = {10.1002/bate.202100064},
  pages     = {852 -- 863},
  year      = {2021},
  abstract  = {Mauerwerksbauten in Deutschland sind mit Einf{\"u}hrung des nationalen Anwendungsdokuments DIN EN 1998-1/NA auf Grundlage einer neuen probabilistischen Erdbebenkarte nachzuweisen. F{\"u}r erfolgreiche Erdbebennachweise {\"u}blicher Grundrissformen von Mauerwerksbauten stehen in dem zuk{\"u}nftigen Anwendungsdokument neue rechnerische Nachweism{\"o}glichkeiten zur Verf{\"u}gung, mit denen die Tragf{\"a}higkeitsreserven von Mauerwerksbauten in der Baupraxis mit einem {\"u}berschaubaren Aufwand besser in Ansatz gebracht werden k{\"o}nnen. Das Standardrechenverfahren ist weiterhin der kraftbasierte Nachweis, der nun mit h{\"o}heren Verhaltensbeiwerten im Vergleich zur DIN 4149 durchgef{\"u}hrt werden kann. Die h{\"o}heren Verhaltensbeiwerte basieren auf der besseren Ausnutzung der geb{\"a}udespezifischen Verformungsf{\"a}higkeit und Energiedissipation sowie der Lastumverteilung der Schubkr{\"a}fte im Grundriss mit Ansatz von Rahmentragwirkung durch Wand-Deckeninteraktionen. Alternativ dazu kann ein nichtlinearer Nachweis auf Grundlage von Pushover-Analysen zur Anwendung kommen. Vervollst{\"a}ndigt werden die Regelungen f{\"u}r Mauerwerksbauten durch neue Regelungen f{\"u}r nichttragende Innenw{\"a}nde und Außenmauerschalen. Der vorliegende Beitrag stellt die Grundlagen und Hintergr{\"u}nde der neuen rechnerischen Nachweise in DIN EN 1998-1/NA vor und demonstriert deren Anwendung an einem Beispiel aus der Praxis.},
  language  = {de}
}
@article{TurlybekulyPogrebnjakSukhodubetal.2019,
  author    = {Turlybekuly, Amanzhol and Pogrebnjak, Alexander and Sukhodub, L. F. and Sukhodub, Liudmyla B. and Kistaubayeva, A. S. and Savitskaya, Irina and Shokatayeva, D. H. and Bondar, Oleksandr V. and Shaimardanov, Z. K. and Plotnikov, Sergey V. and Shaimardanova, B. H. and Digel, Ilya},
  title     = {Synthesis, characterization, in vitro biocompatibility and antibacterial properties study of nanocomposite materials based on hydroxyapatite-biphasic ZnO micro- and nanoparticles embedded in Alginate matrix},
  series = {Materials Science and Engineering C},
  volume    = {104},
  journal   = {Materials Science and Engineering C},
  number    = {Article number 109965},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.msec.2019.109965},
  year      = {2019},
  language  = {en}
}
@inproceedings{GrundmannBauerBieleetal.2015,
  author    = {Grundmann, Jan Thimo and Bauer, Waldemar and Biele, Jens and Cordero, Frederico and Dachwald, Bernd and Koncz, Alexander and Krause, Christian and Mikschl, Tobias and Montenegro, Sergio and Quantius, Dominik and Ruffer, Michael and Sasaki, Kaname and Schmitz, Nicole and Seefeldt, Patric and T{\´o}th, Norbert and Wejmo, Elisabet},
  title     = {From Sail to Soil - Getting Sailcraft Out of the Harbour on a Visit to One of Earth's Nearest Neighbours},
  series = {4th IAA Planetary Denfense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy},
  booktitle = {4th IAA Planetary Denfense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy},
  pages     = {20 S.},
  year      = {2015},
  language  = {en}
}
@article{EngelnMuellges1982,
  author    = {Engeln-M{\"u}llges, Gisela},
  title     = {Entartungsbedingungen f{\"u}r Gleitfl{\"a}chennomogramme und Nomographierbarkeitsbedingungen f{\"u}r Fluchtebenennomogramme},
  series = {ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik},
  volume    = {62},
  journal   = {ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift f{\"u}r Angewandte Mathematik und Mechanik},
  number    = {2},
  issn      = {1521-4001},
  doi       = {10.1002/zamm.19820620203},
  pages     = {77 -- 93},
  year      = {1982},
  language  = {de}
}
@inproceedings{O'HerasDigelTemizArtmann2009,
  author    = {O\'Heras, Carlos and Digel, Ilya and Temiz Artmann, Ayseg{\"u}l},
  title     = {Nanostructured carbon-based column for LPS/protein adsorption : [abstract]},
  year      = {2009},
  abstract  = {The absence of a general method for endotoxin removal from liquid interfaces gives an opportunity to find new methods and materials to overcome this gap. Activated nanostructured carbon is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study is to find the adsorption rates for a carboneous material produced at different temperatures, as well as to reveal possible differences between the performance of the material for each of the adsorbates used during the study (hemoglobin, serum albumin and lipopolysaccharide, LPS).},
  subject      = {Kohlenstofffaser},
  language  = {en}
}
@inproceedings{ElBashirDigel2009,
  author    = {ElBashir, Rasha and Digel, Ilya},
  title     = {Effect of nitric oxide gas on hydrogels : [abstract]},
  year      = {2009},
  abstract  = {The results support our theory that the NO gas has an influence in increasing the translational diffusion of hydrogels and it accelerates the melting process of the gels.},
  subject      = {Stickstoffmonoxid},
  language  = {en}
}
@inproceedings{GoettenHavermannBraunetal.2018,
  author    = {G{\"o}tten, Falk and Havermann, Marc and Braun, Carsten and Gomez, Francisco and Bil, Cees},
  title     = {On the Applicability of Empirical Drag Estimation Methods for Unmanned Air Vehicle Design Read More: https://arc.aiaa.org/doi/10.2514/6.2018-3192},
  series = {2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum},
  booktitle = {2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum},
  issn      = {1533-385X},
  doi       = {10.2514/6.2018-3192},
  pages     = {Article 3192},
  year      = {2018},
  language  = {en}
}
@article{WolfFoltzSchlicketal.2000,
  author    = {Wolf, Martin R. and Foltz, Christian and Schlick, Christopher and Luczak, Holger},
  title     = {Empirische Untersuchung eines Groupware-basierten Unterst{\"u}tzungs-Systems f{\"u}r verfahrenstechnische Entwickler / Wolf, M. ; Foltz, C. ; Schlick, C. ; Luczak, H.},
  series = {Zeitschrift f{\"u}r Arbeitswissenschaft. 54 (2000), H. 3-4},
  journal   = {Zeitschrift f{\"u}r Arbeitswissenschaft. 54 (2000), H. 3-4},
  publisher = {-},
  isbn      = {0340-2444},
  pages     = {258 -- 266},
  year      = {2000},
  language  = {de}
}
@article{KarnatakKantzBialonski2017,
  author    = {Karnatak, Rajat and Kantz, Holger and Bialonski, Stephan},
  title     = {Early warning signal for interior crises in excitable systems},
  series = {Physical Review E},
  volume    = {96},
  journal   = {Physical Review E},
  number    = {4},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.96.042211},
  pages     = {042211},
  year      = {2017},
  language  = {en}
}
@article{KubalskiButenwegElDeib2022,
  author    = {Kubalski, Thomas and Butenweg, Christoph and El-Deib, Khaled},
  title     = {Vereinfachte Ber{\"u}cksichtigung der Rahmentragwirkung in Mauerwerksgeb{\"a}uden},
  series = {Bautechnik},
  volume    = {99},
  journal   = {Bautechnik},
  number    = {12},
  editor    = {Jesse, Dirk},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {0932-8351},
  doi       = {10.1002/bate.202200081},
  pages     = {865 -- 928},
  year      = {2022},
  abstract  = {Aufgrund der gestiegenen Anforderungen durch h{\"o}here Ein-wirkungen aus Wind und Erdbeben ist eine Verbesserung und Optimierung der Berechnungs- und Bemessungsans{\"a}tze f{\"u}r Mauerwerksbauten erforderlich. Eine bessere Ausnutzung der Tragwerksreserven ist durch die Ber{\"u}cksichtigung der Rah-mentragwirkung mit einer Aktivierung der Deckenscheiben in den Rechenmodellen m{\"o}glich, die in der Praxis aufgrund der Komplexit{\"a}t der Wand-Decken-Interaktion bislang nicht aus-genutzt wird. Im vorliegenden Aufsatz wird ein vereinfachter Ansatz auf Grundlage der mitwirkenden Plattenbreite von Schubw{\"a}nden aus Mauerwerk vorgestellt, der die wesentli-chen Einfl ussfaktoren in parametrisierten Tabellen erfasst. Damit steht den Tragwerksplanern ein einfach anwendbares Werkzeug zur Verf{\"u}gung, um die Rahmentragwirkung in der Mauerwerksbemessung anzusetzen.},
  language  = {de}
}
@inproceedings{WeissHeslenfeldSaeweetal.2022,
  author    = {Weiss, Christian and Heslenfeld, Jonas and Saewe, Jasmin Kathrin and Bremen, Sebastian and H{\"a}fner, Constantin Leon},
  title     = {Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)},
  series = {Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]},
  volume    = {111},
  booktitle = {Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2212-8271},
  doi       = {10.1016/j.procir.2022.08.102},
  pages     = {115 -- 120},
  year      = {2022},
  abstract  = {In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.},
  language  = {en}
}
@article{KoenigVoelkerWolfetal.2016,
  author    = {K{\"o}nig, Johannes Alexander and V{\"o}lker, Veronika and Wolf, Martin R. and Schuba, Marko},
  title     = {Gamified Hacking Offence Simulation-based Training (GHOST)},
  series = {Crisis Prevention},
  volume    = {2016},
  journal   = {Crisis Prevention},
  number    = {3},
  publisher = {Beta},
  address   = {Bonn},
  pages     = {44 -- 46},
  year      = {2016},
  language  = {de}
}
@book{MeskourisButenwegHinzenetal.2019,
  author    = {Meskouris, Konstantin and Butenweg, Christoph and Hinzen, Klaus-G. and H{\"o}ffer, R{\"u}diger},
  title     = {Structural Dynamics with Applications in Earthquake and Wind Engineering},
  publisher = {Springer},
  address   = {Berlin, Heidelberg},
  isbn      = {978-3-662-57550-5},
  doi       = {10.1007/978-3-662-57550-5},
  year      = {2019},
  language  = {en}
}
@article{OertelBung2021,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Hochwasserschutz - eine Aufgabe f{\"u}r eine nachhaltige Wasserwirtschaft},
  series = {Wasserwirtschaft},
  volume    = {111},
  journal   = {Wasserwirtschaft},
  number    = {9-10},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {3 -- 19},
  year      = {2021},
  language  = {de}
}
@book{EngelnMuellgesUhlig1996,
  author    = {Engeln-M{\"u}llges, Gisela and Uhlig, Frank},
  title     = {Numerical algorithms with C},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {3-540-60530-0},
  pages     = {XXII, 596 S. : graph. Darst. + 1 CD-ROM},
  year      = {1996},
  language  = {en}
}
@inproceedings{Butenweg2021,
  author    = {Butenweg, Christoph},
  title     = {Integrated approach for monitoring and management of buildings with digital building models and modern sensor technologies},
  series = {Proceedings of the International Conference Civil Engineering 2021 - Achievements and Visions},
  booktitle = {Proceedings of the International Conference Civil Engineering 2021 - Achievements and Visions},
  editor    = {Kuzmanović, Vladan and Ignjatović, Ivan},
  publisher = {University of Belgrade},
  address   = {Belgrade},
  pages     = {67 -- 75},
  year      = {2021},
  abstract  = {Nowadays modern high-performance buildings and facilities are equipped with monitoring systems and sensors to control building characteristics like energy consumption, temperature pattern and structural safety. The visualization and interpretation of sensor data is typically based on simple spreadsheets and non-standardized user-oriented solutions, which makes it difficult for building owners, facility managers and decision-makers to evaluate and understand the data. The solution of this problem in the future are integrated BIM-Sensor approaches which allow the generation of BIM models incorporating all relevant information of monitoring systems. These approaches support both the dynamic visualization of key structural performance parameters, the effective long-term management of sensor data based on BIM and provide a user-friendly interface to communicate with various stakeholders. A major benefit for the end user is the use of the BIM software architecture, which is the future standard anyway. In the following, the application of the integrated BIM-Sensor approach is illustrated for a typical industrial facility as a part of an early warning and rapid response system for earthquake events currently developed in the research project "ROBUST" with financial support by the German Federal Ministry for Economic Affairs and Energy (BMWI).},
  language  = {en}
}