@article{KerresSiekmann2017,
  author    = {Kerres, Karsten and Siekmann, Marko},
  title     = {Wie kommuniziere ich prognosegest{\"u}tzte Instandhaltungsstrategien erfolgreich in politischen Entscheidungsgremien?},
  series = {3 R. Fachzeitschrift f{\"u}r sichere und effiziente Rohleitungssysteme},
  journal   = {3 R. Fachzeitschrift f{\"u}r sichere und effiziente Rohleitungssysteme},
  number    = {12},
  publisher = {Vulkan-Verl.},
  address   = {Essen},
  issn      = {2191-9798},
  pages     = {47 -- 51},
  year      = {2017},
  language  = {de}
}
@article{JildehOberlaenderKirchneretal.2018,
  author    = {Jildeh, Zaid B. and Oberl{\"a}nder, Jan and Kirchner, Patrick and Wagner, Patrick H. and Sch{\"o}ning, Michael Josef},
  title     = {Thermocatalytic Behavior of Manganese (IV) Oxide as Nanoporous Material on the Dissociation of a Gas Mixture Containing Hydrogen Peroxide},
  series = {Nanomaterials},
  volume    = {8},
  journal   = {Nanomaterials},
  number    = {4},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-4991},
  doi       = {10.3390/nano8040262},
  pages     = {Artikel 262},
  year      = {2018},
  abstract  = {In this article, we present an overview on the thermocatalytic reaction of hydrogen peroxide (H₂O₂) gas on a manganese (IV) oxide (MnO₂) catalytic structure. The principle of operation and manufacturing techniques are introduced for a calorimetric H₂O₂ gas sensor based on porous MnO₂. Results from surface analyses by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) of the catalytic material provide indication of the H₂O₂ dissociation reaction schemes. The correlation between theory and the experiments is documented in numerical models of the catalytic reaction. The aim of the numerical models is to provide further information on the reaction kinetics and performance enhancement of the porous MnO₂ catalyst.},
  language  = {en}
}
@article{BaeckerRakowskiKrappenetal.2017,
  author    = {B{\"a}cker, M. and Rakowski, D. and Krappen, E. and Sch{\"o}ning, Michael Josef},
  title     = {Reinigungsprozesse in der Lebensmittelindustrie. Entwicklung eines Demonstrators zur {\"U}berwachung},
  series = {GIT Labor-Fachzeitschrift},
  volume    = {61},
  journal   = {GIT Labor-Fachzeitschrift},
  number    = {8},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0016-3538},
  pages     = {26 -- 28},
  year      = {2017},
  language  = {de}
}
@article{FissabreWilson2018,
  author    = {Fissabre, Anke and Wilson, Ariane},
  title     = {Der Turm mit zehn Spornen - Ein in Monthoiron gebauter Entwurf von Leonardo Da Vinci?},
  series = {In situ: Zeitschrift f{\"u}r Architekturgeschichte},
  journal   = {In situ: Zeitschrift f{\"u}r Architekturgeschichte},
  number    = {1},
  publisher = {Wernersche Verlagsgesellschaft},
  address   = {Worms},
  issn      = {1866-959X},
  pages     = {65 -- 82},
  year      = {2018},
  language  = {de}
}
@article{RoethPielenWolffetal.2018,
  author    = {R{\"o}th, Thilo and Pielen, Michael and Wolff, Klaus and L{\"u}diger, Thomas},
  title     = {Urbane Fahrzeugkonzepte f{\"u}r die Shared Mobility},
  series = {Automobiltechnische Zeitschrift - ATZ},
  volume    = {120},
  journal   = {Automobiltechnische Zeitschrift - ATZ},
  number    = {1},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0001-2785},
  doi       = {10.1007/s35148-017-0176-8},
  pages     = {18 -- 23},
  year      = {2018},
  abstract  = {Urbane Mobilit{\"a}tskonzepte der Zukunft erfordern neue Unternehmensformen, idealerweise aus Old Economy und New Economy, sowie eine enge Anbindung an die gesellschaftsrelevante Zukunftsforschung. F{\"u}r neue Fahrzeugkonzepte des Carsharing bedeutet dies, dass alle kostenverursachenden Faktoren erfasst und analysiert werden m{\"u}ssen. Die FH Aachen, share2drive und FEV geben einen Ausblick auf die zuk{\"u}nftige Fahrzeugklasse der Personal Public Vehicles als „Rolling Device".},
  language  = {de}
}
@article{SchirraBissonnetteBramesfeld2018,
  author    = {Schirra, Julian and Bissonnette, William and Bramesfeld, G{\"o}tz},
  title     = {Wake-model effects on induced drag prediction of staggered boxwings},
  series = {Aerospace},
  volume    = {5},
  journal   = {Aerospace},
  number    = {1},
  issn      = {2226-4310},
  doi       = {10.3390/aerospace5010014},
  year      = {2018},
  language  = {en}
}
@article{Dikta2017,
  author    = {Dikta, Gerhard},
  title     = {Semi-parametric random censorship models},
  series = {From Statistics to Mathematical Finance : Festschrift in Honour of Winfried Stute},
  journal   = {From Statistics to Mathematical Finance : Festschrift in Honour of Winfried Stute},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-319-50986-0},
  doi       = {10.1007/978-3-319-50986-0_3},
  pages     = {43 -- 56},
  year      = {2017},
  language  = {en}
}
@article{DruckenmuellerGuentherElbers2018,
  author    = {Druckenm{\"u}ller, Katharina and G{\"u}nther, Klaus and Elbers, Gereon},
  title     = {Near-infrared spectroscopy (NIRS) as a tool to monitor exhaust air from poultry operations},
  series = {Science of the Total Environment},
  volume    = {630},
  journal   = {Science of the Total Environment},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0048-9697},
  doi       = {10.1016/j.scitotenv.2018.02.072},
  pages     = {536 -- 543},
  year      = {2018},
  abstract  = {Intensive poultry operation systems emit a considerable volume of inorganic and organic matter in the surrounding environment. Monitoring cleaning properties of exhaust air cleaning systems and to detect small but significant changes in emission characteristics during a fattening cycle is important for both emission and fattening process control. In the present study, we evaluated the potential of near-infrared spectroscopy (NIRS) combined with chemometric techniques as a monitoring tool of exhaust air from poultry operation systems. To generate a high-quality data set for evaluation, the exhaust air of two poultry houses was sampled by applying state-of-the-art filter sampling protocols. The two stables were identical except for one crucial difference, the presence or absence of an exhaust air cleaning system. In total, twenty-one exhaust air samples were collected at the two sites to monitor spectral differences caused by the cleaning device, and to follow changes in exhaust air characteristics during a fattening period. The total dust load was analyzed by gravimetric determination and included as a response variable in multivariate data analysis. The filter samples were directly measured with NIR spectroscopy. Principal component analysis (PCA), linear discriminant analysis (LDA), and factor analysis (FA) were effective in classifying the NIR exhaust air spectra according to fattening day and origin. The results indicate that the dust load and the composition of exhaust air (inorganic or organic matter) substantially influence the NIR spectral patterns. In conclusion, NIR spectroscopy as a tool is a promising and very rapid way to detect differences between exhaust air samples based on still not clearly defined circumstances triggered during a fattening period and the availability of an exhaust air cleaning system.},
  language  = {en}
}
@article{Wollert2018,
  author    = {Wollert, J{\"o}rg},
  title     = {Echtzeit-Ethernet - Basis f{\"u}r Industrie 4.0},
  series = {Design \& Elektronik},
  journal   = {Design \& Elektronik},
  publisher = {WEKA-Fachmedien},
  address   = {M{\"u}nchen},
  isbn      = {0933-8667},
  year      = {2018},
  language  = {de}
}
@article{PilasYaziciSelmeretal.2018,
  author    = {Pilas, Johanna and Yazici, Y. and Selmer, Thorsten and Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Application of a portable multi-analyte biosensor for organic acid determination in silage},
  series = {Sensors},
  volume    = {18},
  journal   = {Sensors},
  number    = {5},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1424-8220},
  doi       = {10.3390/s18051470},
  pages     = {12 Seiten},
  year      = {2018},
  abstract  = {Multi-analyte biosensors may offer the opportunity to perform cost-effective and rapid analysis with reduced sample volume, as compared to electrochemical biosensing of each analyte individually. This work describes the development of an enzyme-based biosensor system for multi-parametric determination of four different organic acids. The biosensor array comprises five working electrodes for simultaneous sensing of ethanol, formate, d-lactate, and l-lactate, and an integrated counter electrode. Storage stability of the biosensor was evaluated under different conditions (stored at +4 °C in buffer solution and dry at -21 °C, +4 °C, and room temperature) over a period of 140 days. After repeated and regular application, the individual sensing electrodes exhibited the best stability when stored at -21 °C. Furthermore, measurements in silage samples (maize and sugarcane silage) were conducted with the portable biosensor system. Comparison with a conventional photometric technique demonstrated successful employment for rapid monitoring of complex media.},
  language  = {en}
}
@article{DantismRoehlenWagneretal.2018,
  author    = {Dantism, Shahriar and R{\"o}hlen, Desiree and Wagner, Torsten and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Optimization of Cell-Based Multi-Chamber LAPS Measurements Utilizing FPGA-Controlled Laser-Diode Modules},
  series = {physica status solidi a : applications and materials sciences},
  volume    = {215},
  journal   = {physica status solidi a : applications and materials sciences},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1862-6319},
  doi       = {10.1002/pssa.201800058},
  pages     = {Article number 1800058},
  year      = {2018},
  abstract  = {A light-addressable potentiometric sensor (LAPS) is a field-effect-based potentiometric device, which detects concentration changes of an analyte solution on the sensor surface in a spatially resolved way. It uses a light source to generate electron-hole pairs inside the semiconductor, which are separated in the depletion region due to an applied bias voltage across the sensor structure and hence, a surface-potential-dependent photocurrent can be read out. However, depending on the beam angle of the light source, scattering effects can occur, which influence the recorded signal in LAPS-based differential measurements. To solve this problem, a novel illumination unit based on a field programmable gate array (FPGA) consisting of 16 small-sized tunable infrared laser-diode modules (LDMs) is developed. Due to the improved focus of the LDMs with a beam angle of only 2 mrad, undesirable scattering effects are minimized. Escherichia coli (E. coli) K12 bacteria are used as a test microorganism to study the extracellular acidification on the sensor surface. Furthermore, a salt bridge chamber is built up and integrated with the LAPS system enabling multi-chamber differential measurements with a single Ag/AgCl reference electrode.},
  language  = {en}
}
@article{VahidpourOberlaenderSchoening2018,
  author    = {Vahidpour, Farnoosh and Oberl{\"a}nder, Jan and Sch{\"o}ning, Michael Josef},
  title     = {Flexible Calorimetric Gas Sensors for Detection of a Broad Concentration Range of Gaseous Hydrogen Peroxide: A Step Forward to Online Monitoring of Food-Package Sterilization Processes},
  series = {Phys. Status Solidi A},
  volume    = {215},
  journal   = {Phys. Status Solidi A},
  number    = {15},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  doi       = {10.1002/pssa.201800044},
  pages     = {Artikel 1800044},
  year      = {2018},
  abstract  = {In this study, flexible calorimetric gas sensors are developed for specificdetection of gaseous hydrogen peroxide (H₂O₂) over a wide concentrationrange, which is used in sterilization processes for aseptic packaging industry.The flexibility of these sensors is an advantage for identifying the chemical components of the sterilant on the corners of the food boxes, so-called "coldspots", as critical locations in aseptic packaging, which are of great importance. These sensors are fabricated on flexible polyimide films by means of thin-film technique. Thin layers of titanium and platinum have been deposited on polyimide to define the conductive structures of the sensors. To detect the high-temperature evaporated H₂O₂, a differential temperature set-up is proposed. The sensors are evaluated in a laboratory-scaled sterilizationsystem to simulate the sterilization process. The concentration range of the evaporated H₂O₂ from 0 to 7.7\% v/v was defined and the sensors have successfully detected high as well as low H₂O₂ concentrations with a sensitivity of 5.04 °C/\% v/v. The characterizations of the sensors confirm their precise fabrication, high sensitivity and the novelty of low H₂O₂ concentration detections for future inline monitoring of food-package sterilization.},
  language  = {en}
}
@article{KunkelGebhardtMpofuetal.2018,
  author    = {Kunkel, Maximilian Hugo and Gebhardt, Andreas and Mpofu, Khumbaulani and Kallweit, Stephan},
  title     = {Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel},
  series = {The International Journal of Advanced Manufacturing Technology},
  volume    = {98},
  journal   = {The International Journal of Advanced Manufacturing Technology},
  number    = {5-8},
  publisher = {Springer},
  address   = {London},
  issn      = {0268-3768},
  doi       = {10.1007/s00170-018-2040-8},
  pages     = {1409 -- 1431},
  year      = {2018},
  abstract  = {The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.},
  language  = {en}
}
@article{Wilke2017,
  author    = {Wilke, Thomas},
  title     = {Newly found plans for the chapel of the Holy Shroud},
  series = {Studi Piemontesi},
  volume    = {XLVI},
  journal   = {Studi Piemontesi},
  number    = {1},
  issn      = {0392-7261},
  pages     = {75 -- 85},
  year      = {2017},
  language  = {en}
}
@article{WeiheAnsgarRoethetal.2013,
  author    = {Weihe, Stefan and Ansgar, Ernst and R{\"o}th, Thilo and Proksch, Johannes},
  title     = {Leichtmetall-Stahl-Verbundguss im Nutzfahrzeugbau},
  series = {Lightweight Design},
  volume    = {6},
  journal   = {Lightweight Design},
  number    = {2},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2192-8738 (Online)},
  pages     = {38 -- 43},
  year      = {2013},
  abstract  = {In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler Tooling GmbH \& Co. KG wird das Leichtbaupotenzial von Stahlblech-AluminiumverbundgussHybriden am Beispiel des vorderen Dachquertr{\"a}gers des Mercedes-Benz Viano/Vito ausf{\"u}hrlich untersucht.},
  language  = {de}
}
@article{WeiheErnstRoethetal.2013,
  author    = {Weihe, Stefan and Ernst, Ansgar and R{\"o}th, Thilo and Proksch, Johannes},
  title     = {Aluminium-Stahl-Verbundguss im Nutzfahrzeugbau},
  series = {ATZ - Automobiltechnische Zeitschrift},
  volume    = {115},
  journal   = {ATZ - Automobiltechnische Zeitschrift},
  number    = {4},
  publisher = {Springer Fachmedien Wiesbaden},
  issn      = {2192-8800 (Online)},
  pages     = {312 -- 316},
  year      = {2013},
  abstract  = {In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler Tooling GmbH \& Co. KG wird das Leichtbaupotenzial von Aluminiumverbundguss-Stahlblech-Hybriden am Beispiel des vorderen Dachquertr{\"a}gers des Mercedes-Benz Viano/Vito ausf{\"u}hrlich untersucht.},
  language  = {de}
}
@article{SchuhHoehneHessler2008,
  author    = {Schuh, G{\"u}nther and H{\"o}hne, Tim and Heßler, Stefan},
  title     = {Adaptive Logistik : Informationsmanagement in der Standplatzmontage},
  series = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe},
  journal   = {Karlsruher Arbeitsgespr{\"a}che Produktionsforschung 2008 : Spitzentechnologien f{\"u}r den Wirtschaftsmotor Produktion - Ergebnisse aus dem BMBF-Rahmenkonzept "Forschung f{\"u}r die Produktion von morgen"; Tagungsband zur Veranstaltung am 11. und 12. M{\"a}rz 2008 Kongresszentrum Stadthalle Karlsruhe},
  pages     = {248 -- 255},
  year      = {2008},
  language  = {de}
}
@article{HoehnePulz2009,
  author    = {H{\"o}hne, Tim and Pulz, Christian},
  title     = {Projekt Adaptive Logistik : Dienstleister f{\"u}r die Montage in der Auftragsfertigung},
  series = {RFID-Innovationen in Produktion und Logistik - Eine Analyse zu Potenzialen des RFID-Einsatzes in Produktion und Logistik},
  journal   = {RFID-Innovationen in Produktion und Logistik - Eine Analyse zu Potenzialen des RFID-Einsatzes in Produktion und Logistik},
  editor    = {Isensee, Johannes},
  issn      = {1860-840X},
  pages     = {11 -- 19},
  year      = {2009},
  language  = {de}
}
@article{Wilke2017,
  author    = {Wilke, Thomas},
  title     = {[Rezension zu:] Deutsch, Kristina: Jean Marot. Un graveur d'architecture {\`a} l'{\´e}poque de Louis XIV. (= Ars et Scientia; 12), Berlin; Boston 2015.},
  series = {ArtHist.net},
  journal   = {ArtHist.net},
  year      = {2017},
  language  = {de}
}
@article{Wilke2015,
  author    = {Wilke, Thomas},
  title     = {[Rezension zu: ] Yvonne Prinzessin von Cro{\"y}: Das H{\^o}tel de Galliffet (1784-1792). Pariser Baupraxis undAusstattungskunst am feudalen Privatbau des ausgehenden Ancien R{\´e}gime, Hildesheim: Olms 2014},
  series = {Sehepunkte},
  volume    = {15},
  journal   = {Sehepunkte},
  number    = {9},
  issn      = {1618-6168},
  year      = {2015},
  language  = {de}
}