@inproceedings{Matcha2016,
  author    = {Matcha, Heike},
  title     = {From Designing Buildings from Systems to Designing Systems for Buildings},
  series = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  booktitle = {Complexity \& Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1},
  editor    = {Herneoja, Aulikki and {\"O}sterlund, Toni and Markkanen, Piia},
  publisher = {ECAADe},
  address   = {Oulu, Finland},
  doi       = {10.52842/conf.ecaade.2016.1.237},
  pages     = {237 -- 240},
  year      = {2016},
  abstract  = {We study the novel possibilities computer aided design and production open up for the design of building systems. Such systems today can, via individualized mass production, consist of a larger number and more complex parts than previously and therefore be assembled into more complex wholes. This opens up the possibility of designing specialized systems specifically for single buildings. The common order of starting with a building system and designing a building using this system can be reversed to designing a building first and then developing a system specifically for that building. We present and discuss research that incorporates students design projects into research work and fosters links between research and teaching.},
  language  = {en}
}
@phdthesis{Frotscher2016,
  author    = {Frotscher, Ralf},
  title     = {Electromechanical modeling and simulation of thin cardiac tissue constructs - smoothed FEM applied to a biomechanical plate problem},
  year      = {2016},
  language  = {en}
}
@article{ScheerWilson2016,
  author    = {Scheer, Nico and Wilson, Ian D.},
  title     = {A comparison between genetically humanized and chimeric liver humanized mouse models for studies in drug metabolism and toxicity},
  series = {Drug Discovery Today},
  volume    = {21},
  journal   = {Drug Discovery Today},
  number    = {2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-6446},
  doi       = {10.1016/j.drudis.2015.09.002},
  pages     = {250 -- 263},
  year      = {2016},
  abstract  = {Mice that have been genetically humanized for proteins involved in drug metabolism and toxicity and mice engrafted with human hepatocytes are emerging and promising in vivo models for an improved prediction of the pharmacokinetic, drug-drug interaction and safety characteristics of compounds in humans. The specific advantages and disadvantages of these models should be carefully considered when using them for studies in drug discovery and development. Here, an overview on the corresponding genetically humanized and chimeric liver humanized mouse models described to date is provided and illustrated with examples of their utility in drug metabolism and toxicity studies. We compare the strength and weaknesses of the two different approaches, give guidance for the selection of the appropriate model for various applications and discuss future trends and perspectives.},
  language  = {en}
}
@incollection{ScheerChuSalphatietal.2016,
  author    = {Scheer, Nico and Chu, Xiaoyan and Salphati, Laurent and Zamek-Gliszczynski, Maciej J.},
  title     = {Knockout and humanized animal models to study membrane transporters in drug development},
  series = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  booktitle = {Drug Transporters: Volume 1: Role and Importance in ADME and Drug Development},
  editor    = {Nicholls, Glynis},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  isbn      = {978-1-78262-379-3},
  doi       = {10.1039/9781782623793-00298},
  pages     = {298 -- 332},
  year      = {2016},
  language  = {en}
}
@phdthesis{Foeckler2016,
  author    = {F{\"o}ckler, Nicole},
  title     = {Biomarker zur Prognose von Fr{\"u}hgeburten : ein biomedizintechnischer Ansatz},
  publisher = {Deutsche Zentralbibliothek f{\"u}r Medizin},
  address   = {K{\"o}ln},
  doi       = {10.4126/FRL01-006401575},
  pages     = {VII, 117 S.},
  year      = {2016},
  language  = {de}
}
@article{WeberArentMuenchetal.2016,
  author    = {Weber, Tobias and Arent, Jan-Christoph and M{\"u}nch, Lukas and Duhovic, Miro and Balvers, Johannes M.},
  title     = {A fast method for the generation of boundary conditions for thermal autoclave simulation},
  series = {Composites Part A},
  volume    = {88},
  journal   = {Composites Part A},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1359-835X},
  doi       = {10.1016/j.compositesa.2016.05.036},
  pages     = {216 -- 225},
  year      = {2016},
  abstract  = {Manufacturing process simulation enables the evaluation and improvement of autoclave mold concepts early in the design phase. To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations. Most challenging for such a simulation is the generation of necessary boundary conditions. Heat-up and temperature distribution in an autoclave mold are governed by flow phenomena, tooling material and shape, position within the autoclave, and the chosen autoclave cycle. This paper identifies and summarizes the most important factors influencing mold heat-up and how they can be introduced into a thermal simulation. Thermal measurements are used to quantify the impact of the various parameters. Finally, the gained knowledge is applied to develop a semi-empirical approach for boundary condition estimation that enables a simple and fast thermal simulation of the autoclave curing process with reasonably high accuracy for tooling optimization.},
  language  = {en}
}
@article{SvaneborgKarimiVarzanehHojdisetal.2016,
  author    = {Svaneborg, Carsten and Karimi-Varzaneh, Hossein Ali and Hojdis, Nils and Fleck, Franz and Everaers, Ralf},
  title     = {Multiscale approach to equilibrating model polymer melts},
  series = {Physical Review E},
  volume    = {94},
  journal   = {Physical Review E},
  number    = {032502},
  publisher = {AIP Publishing},
  address   = {Melville, NY},
  issn      = {2470-0053},
  doi       = {10.1103/PhysRevE.94.032502},
  year      = {2016},
  abstract  = {We present an effective and simple multiscale method for equilibrating Kremer Grest model polymer melts of varying stiffness. In our approach, we progressively equilibrate the melt structure above the tube scale, inside the tube and finally at the monomeric scale. We make use of models designed to be computationally effective at each scale. Density fluctuations in the melt structure above the tube scale are minimized through a Monte Carlo simulated annealing of a lattice polymer model. Subsequently the melt structure below the tube scale is equilibrated via the Rouse dynamics of a force-capped Kremer-Grest model that allows chains to partially interpenetrate. Finally the Kremer-Grest force field is introduced to freeze the topological state and enforce correct monomer packing. We generate 15 melts of 500 chains of 10.000 beads for varying chain stiffness as well as a number of melts with 1.000 chains of 15.000 monomers. To validate the equilibration process we study the time evolution of bulk, collective, and single-chain observables at the monomeric, mesoscopic, and macroscopic length scales. Extension of the present method to longer, branched, or polydisperse chains, and/or larger system sizes is straightforward.},
  language  = {en}
}
@article{SchwabHojdisLacayoetal.2016,
  author    = {Schwab, Lukas and Hojdis, Nils and Lacayo, Jorge and Wilhelm, Manfred},
  title     = {Fourier-Transform Rheology of Unvulcanized, Carbon Black Filled Styrene Butadiene Rubber},
  series = {Macromolecular Materials and Engineering},
  volume    = {301},
  journal   = {Macromolecular Materials and Engineering},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1439-2054},
  doi       = {10.1002/mame.201500356},
  pages     = {457 -- 468},
  year      = {2016},
  abstract  = {Rubber materials filled with reinforcing fillers display nonlinear rheological behavior at small strain amplitudes below γ0 < 0.1. Nevertheless, rheological data are analyzed mostly in terms of linear parameters, such as shear moduli (G′, G″), which loose their physical meaning in the nonlinear regime. In this work styrene butadiene rubber filled with carbon black (CB) under large amplitude oscillatory shear (LAOS) is analyzed in terms of the nonlinear parameter I3/1. Three different CB grades are used and the filler load is varied between 0 and 70 phr. It is found that I3/1(φ) is most sensitive to changes of the total accessible filler surface area at low strain amplitudes (γ0 = 0.32). The addition of up to 70 phr CB leads to an increase of I3/1(φ) by a factor of more than ten. The influence of the measurement temperature on I3/1 is pronounced for CB levels above the percolation threshold.},
  language  = {en}
}
@article{HarishWriggersJungketal.2016,
  author    = {Harish, Ajay B. and Wriggers, Peter and Jungk, Juliane and Hojdis, Nils and Recker, Carla},
  title     = {Mesoscale Constitutive Modeling of Non-Crystallizing Filled Elastomers},
  series = {Computational Mechanics},
  volume    = {57},
  journal   = {Computational Mechanics},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1432-0924},
  doi       = {10.1007/s00466-015-1251-1},
  pages     = {653 -- 677},
  year      = {2016},
  abstract  = {Elastomers are exceptional materials owing to their ability to undergo large deformations before failure. However, due to their very low stiffness, they are not always suitable for industrial applications. Addition of filler particles provides reinforcing effects and thus enhances the material properties that render them more versatile for applications like tyres etc. However, deformation behavior of filled polymers is accompanied by several nonlinear effects like Mullins and Payne effect. To this day, the physical and chemical changes resulting in such nonlinear effect remain an active area of research. In this work, we develop a heterogeneous (or multiphase) constitutive model at the mesoscale explicitly considering filler particle aggregates, elastomeric matrix and their mechanical interaction through an approximate interface layer. The developed constitutive model is used to demonstrate cluster breakage, also, as one of the possible sources for Mullins effect observed in non-crystallizing filled elastomers.},
  language  = {en}
}
@book{Altherr2016,
  author    = {Altherr, Lena},
  title     = {Algorithmic System Design under Consideration of Dynamic Processes},
  publisher = {Shaker},
  address   = {Aachen},
  isbn      = {978-3-8440-4848-3},
  pages     = {94},
  year      = {2016},
  abstract  = {Nach Stand von Wissenschaft und Technik werden Komponenten hinsichtlich ihrer Eigenschaften, wie Lebensdauer oder Energieeffizienz, optimiert. Allerdings k{\"o}nnen selbst hervorragende Komponenten zu ineffizienten oder instabilen Systemen f{\"u}hren, wenn ihr Zusammenspiel nur unzureichend ber{\"u}cksichtigt wird. Eine Systembetrachtung schafft ein gr{\"o}ßeres Optimierungspotential - dem erh{\"o}hten Potential steht jedoch auch ein erh{\"o}hter Komplexit{\"a}tsgrad gegen{\"u}ber. Die vorliegende Arbeit ist im Rahmen des Sonderforschungsbereichs 805 entstanden, dessen Ziel die Beherrschung von Unsicherheit in Systemen des Maschinenbaus ist. Die Arbeit zeigt anhand eines realen Systems aus dem Bereich der Hydraulik, wie Unsicherheit in der Entwicklungsphase beherrscht werden kann. Hierbei ist neu, dass die durch den sp{\"a}teren Betrieb zu erwartende Systemdegradation eines jeden m{\"o}glichen Systemvorschlags antizipiert werden kann. Dadurch k{\"o}nnen Betriebs- und Wartungskosten vorausgesagt und minimiert werden und durch eine optimale Betriebs- und Wartungsstrategie die Verf{\"u}gbarkeit des Systems garantiert werden. Wesentliche Fragen bei der optimalen Auslegung des betrachteten hydrostatischen Getriebes sind dessen physikalische Modellierung, die Darstellung des Optimierungsproblems als gemischt-ganzzahliges lineares Programm, und dessen algorithmische Behandlung zur L{\"o}sungsfindung. Hierzu werden Heuristiken zum schnelleren Auffinden sinnvoller Systemtopologien vorgestellt und mittels mathematischer Dekomposition eine Bewertung des dynamischen Verschleiß- und Wartungsverlaufs m{\"o}glicher Systemvorschl{\"a}ge vorgenommen. Die Arbeit stellt die Optimierung technischer Systeme an der Schnittstelle von Mathematik, Informatik und Ingenieurwesen sowohl gr{\"u}ndlich als auch anschaulich und nachvollziehbar dar.},
  language  = {en}
}
@incollection{AltherrEdererLorenzetal.2016,
  author    = {Altherr, Lena and Ederer, Thorsten and Lorenz, Ulf and Pelz, Peter F. and P{\"o}ttgen, Philipp},
  title     = {Designing a feedback control system via mixed-integer programming},
  series = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research},
  booktitle = {Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research},
  editor    = {L{\"u}bbecke, Marco E. and Koster, Arie and Letmathe, Peter and Madlener, Reihard and Preis, Britta and Walther, Grit},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-28695-2},
  doi       = {10.1007/978-3-319-28697-6_18},
  pages     = {121 -- 127},
  year      = {2016},
  abstract  = {Pure analytical or experimental methods can only find a control strategy for technical systems with a fixed setup. In former contributions we presented an approach that simultaneously finds the optimal topology and the optimal open-loop control of a system via Mixed Integer Linear Programming (MILP). In order to extend this approach by a closed-loop control we present a Mixed Integer Program for a time discretized tank level control. This model is the basis for an extension by combinatorial decisions and thus for the variation of the network topology. Furthermore, one is able to appraise feasible solutions using the global optimality gap.},
  language  = {en}
}
@inproceedings{RauschLeiseEdereretal.2016,
  author    = {Rausch, Lea and Leise, Philipp and Ederer, Thorsten and Altherr, Lena and Pelz, Peter F.},
  title     = {A comparison of MILP and MINLP solver performance on the example of a drinking water supply system design problem},
  series = {ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering},
  booktitle = {ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering},
  editor    = {Papadrakakis, M. and Ppadopoulos, V. and Stefanou, G. and Plevris, V.},
  isbn      = {978-618-82844-0-1},
  pages     = {8509 -- 8527},
  year      = {2016},
  abstract  = {Finding a good system topology with more than a handful of components is a highly non-trivial task. The system needs to be able to fulfil all expected load cases, but at the same time the components should interact in an energy-efficient way. An example for a system design problem is the layout of the drinking water supply of a residential building. It may be reasonable to choose a design of spatially distributed pumps which are connected by pipes in at least two dimensions. This leads to a large variety of possible system topologies. To solve such problems in a reasonable time frame, the nonlinear technical characteristics must be modelled as simple as possible, while still achieving a sufficiently good representation of reality. The aim of this paper is to compare the speed and reliability of a selection of leading mathematical programming solvers on a set of varying model formulations. This gives us empirical evidence on what combinations of model formulations and solver packages are the means of choice with the current state of the art.},
  language  = {en}
}
@inproceedings{GrundmannBieleDachwaldetal.2016,
  author    = {Grundmann, Jan Thimo and Biele, Jens and Dachwald, Bernd and Grimm, Christian and Lange, Caroline and Ulamec, Stephan},
  title     = {Small spacecraft for small solar system body science, planetary defence and applications},
  series = {IEEE Aerospace Conference 2016},
  booktitle = {IEEE Aerospace Conference 2016},
  pages     = {1 -- 20},
  year      = {2016},
  abstract  = {Following the recent successful landings and occasional re-awakenings of PHILAE, the lander carried aboard ROSETTA to comet 67P/Churyumov-Gerasimenko, and the launch of the Mobile Asteroid Surface Scout, MASCOT, aboard the HAYABUSA2 space probe to asteroid (162173) Ryugu we present an overview of the characteristics and peculiarities of small spacecraft missions to small solar system bodies (SSSB). Their main purpose is planetary science which is transitioning from a 'pure' science of observation of the distant to one also supporting in-situ applications relevant for life on Earth. Here we focus on missions at the interface of SSSB science and planetary defence applications. We provide a brief overview of small spacecraft SSSB missions and on this background present recent missions, projects and related studies at the German Aerospace Center, DLR, that contribute to the worldwide planetary defence community. These range from Earth orbit technology demonstrators to active science missions in interplanetary space. We provide a summary of experience from recently flown missions with DLR participation as well as a number of studies. These include PHILAE, the lander of ESA's ROSETTA comet rendezvous mission now on the surface of comet 67P/Churyumov-Gerasimenko, and the Mobile Asteroid Surface Scout, MASCOT, now in cruise to the ~1 km diameter C-type near-Earth asteroid (162173) Ryugu aboard the Japanese sample-return probe HAYABUSA2. We introduce the differences between the conventional methods employed in the design, integration and testing of large spacecraft and the new approaches developed by small spacecraft projects. We expect that the practical experience that can be gained from projects on extremely compressed timelines or with high-intensity operation phases on a newly explored small solar system body can contribute significantly to the study, preparation and realization of future planetary defence related missions. One is AIDA (Asteroid Impact \& Deflection Assessment), a joint effort of ESA, JHU/APL, NASA, OCA and DLR, combining JHU/APL's DART (Double Asteroid Redirection Test) and ESA's AIM (Asteroid Impact Monitor) spacecraft in a mission towards near-Earth binary asteroid system (65803) Didymos. DLR is currently applying MASCOT heritage and lessons learned to the design of MASCOT2, a lander for the AIM mission to support a bistatic low frequency radar experiment with PHILAE/ROSETTA CONSERT heritage to explore the inner structure of Didymoon which is the designated impact target for DART.},
  language  = {en}
}
@inproceedings{KoenigWolf2016,
  author    = {K{\"o}nig, Johannes Alexander and Wolf, Martin},
  title     = {A new definition of competence developing games - and a framework to assess them},
  series = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  booktitle = {ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions},
  isbn      = {978-1-61208-468-8},
  pages     = {95 -- 97},
  year      = {2016},
  abstract  = {There are different types of games that try to make use of the motivation of a gaming situation in learning contexts. This paper introduces the new terminology 'Competence Developing Game' (CDG) as an umbrella term for all games with this intention. Based on this new terminology, an assessment framework has been developed and validated in scope of an empirical study. Now, all different types of CDGs can be evaluated according to a defined and uniform set of assessment criteria and, thus, are comparable according to their characteristics and effectiveness.},
  language  = {en}
}
@inproceedings{HallmannHeideckerSchlottereretal.2016,
  author    = {Hallmann, Marcus and Heidecker, Ansgar and Schlotterer, Markus and Dachwald, Bernd},
  title     = {GTOC8: results and methods of team 15 DLR},
  series = {26th AAS/AIAA Space Flight Mechanics Meeting, Napa, CA},
  booktitle = {26th AAS/AIAA Space Flight Mechanics Meeting, Napa, CA},
  year      = {2016},
  abstract  = {This paper describes the results and methods used during the 8th Global Trajectory Optimization Competition (GTOC) of the DLR team. Trajectory optimization is crucial for most of the space missions and usually can be formulated as a global optimization problem. A lot of research has been done to different type of mission problems. The most demanding ones are low thrust transfers with e.g. gravity assist sequences. In that case the optimal control problem is combined with an integer problem. In most of the GTOCs we apply a filtering of the problem based on domain knowledge.},
  language  = {en}
}
@inproceedings{LeichtScholtenSteuerDankertBouffier2016,
  author    = {Leicht-Scholten, Carmen and Steuer-Dankert, Linda and Bouffier, Anna},
  title     = {Facing Future Challenges: Building Engineers for Tomorrow},
  series = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016},
  booktitle = {Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016},
  isbn      = {978-886292-705-5},
  pages     = {32 -- 37},
  year      = {2016},
  abstract  = {Future engineers are increasingly confronted with the so-called Megatrends which are the big social challenges society has to cope with. These Megatrends, such as "Silver Society", "Globalization", "Mobility" and "Female Shift" require an application-oriented perspective on Diversity especially in the engineering field. Therefore, it is necessary to enable future engineers not only to look at the technical perspectives of a problem, but also to be able to see the related questions within societies they are developing their artefacts for. The aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world. Bringing together technical knowledge and social competences which go beyond a mere training of the so-called "soft skills", is a new approach followed at RWTH Aachen University, one of the leading technical universities in Germany. RWTH Aachen University has established the bridging professorship "Gender and Diversity in Engineering" (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. In the frame of a sustainable teaching concept the research group under the leadership of Prof. Carmen Leicht-Scholten has developed an approach which imparts a supplication-specific Gender and Diversity expertise to engineers. In workshops students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge in their special field of study and later work. To substantiate this, the course participants have to solve case studies from real life. The cases which are developed in collaboration with non-profit organizations and enterprises from economy rise the students to challenges which are inspired by professional life. Evaluation shows the success of this approach as well as an increasing demand for such teaching formats.},
  language  = {en}
}
@inproceedings{SteuerDankertLeichtScholten2016,
  author    = {Steuer-Dankert, Linda and Leicht-Scholten, Carmen},
  title     = {Social responsibility and innovation - Key competencies for engineers},
  series = {ICERI 2016: 9th International Conference of Education, Research and Innovation: Conference Proceedings : Seville (Spain), 14-16 November},
  booktitle = {ICERI 2016: 9th International Conference of Education, Research and Innovation: Conference Proceedings : Seville (Spain), 14-16 November},
  isbn      = {978-84-617-5895-1},
  issn      = {2340-1095},
  doi       = {10.21125/iceri.2016.0353},
  pages     = {5967 -- 5976},
  year      = {2016},
  abstract  = {Engineers are of particular importance for the societies of tomorrow. The big social challenges society has to cope with in future, can only be mastered, if engineers link the development and innovation process closely with the requirements of people. As a result, in the frame of the innovation process engineers have to design and develop products for diverse users. Therefore, the consideration of diversity in this process is a core competence engineers should have. Implementing the consideration of diverse requirements into product design is also linked to the development of sustainable products and thus leads to social responsible research and development, the core concept formulated by the EU. For this reason, future engineers should be educated to look at the technical perspectives of a problem embedded in the related questions within societies they are developing their artefacts for. As a result, the aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world. To match the competence profiles of future engineers to the global challenges and the resulting social responsibility, RWTH Aachen University, one of the leading technical universities in Germany, has established the bridging professorship "Gender and Diversity in Engineering" (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. The interdisciplinary teaching concept of the research group pursues an approach which imparts an application oriented Gender and Diversity expertise to future engineers. In the frame of an established teaching concept, which is a result of experiences and expertise of the research group, students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge into their later field of action. In the frame of the conference the institutional approach will be presented as well as the teaching concept which will be introduced by concrete course examples.},
  language  = {en}
}
@misc{AlKaidyTippkoetterUlber2016,
  author    = {Al-Kaidy, Huschyar and Tippk{\"o}tter, Nils and Ulber, Roland},
  title     = {Vorrichtung und Verfahren zur Bestimmung des Kontaktwinkels eines Fl{\"u}ssigk{\"o}rpers mit einer Festk{\"o}rperoberfl{\"a}che},
  year      = {2016},
  abstract  = {Die vorliegende Erfindung betrifft eine Vorrichtung und ein Verfahren zur Bestimmung des Kontaktwinkels eines fl{\"u}ssigen oder mit Fl{\"u}ssigkeit gef{\"u}llten K{\"o}rpers. Dieser besteht aus einem Tr{\"a}ger (1) und einer damit verbundenen, in einem Winkelbereich von mehr als 0 ° bis maximal 90 ° neigbaren Ebene (8) mit einer darin ausgebildeten Abrollbahn (9) f{\"u}r den fl{\"u}ssigen oder mit Fl{\"u}ssigkeit gef{\"u}llten K{\"o}rper. An der Ebene (8) sind mehrere Sensoren (11,12) zur Erfassung der Rolldauer des K{\"o}rpers entlang der Rollstrecke angeordnet. Erfindungsgem{\"a}ß ist vorgesehen, dass die Einstellung des Neigungswinkels der Ebene (8) {\"u}ber ein Winkelmessger{\"a}t (10) erfolgt, wodurch ein Abrollwinkel erfassbar ist, bei dem der K{\"o}rper in Bewegung ger{\"a}t. Aus der Rolldauer, der Rollstrecke und dem Abrollwinkel wird der Kontaktwinkel des K{\"o}rpers ermittelt.},
  language  = {de}
}
@incollection{ButenwegKubalskiMarinkovicetal.2016,
  author    = {Butenweg, Christoph and Kubalski, Thomas and Marinkovic, Marko and Pfetzing, Thomas and Ismail, Mohammed and Fehling, Ekkehard},
  title     = {Ausfachungen aus Ziegelmauerwerk},
  series = {Mauerwerk-Kalender 2016: Baustoffe, Sanierung, Eurocode-Praxis},
  booktitle = {Mauerwerk-Kalender 2016: Baustoffe, Sanierung, Eurocode-Praxis},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  isbn      = {978-3-433-03131-5},
  year      = {2016},
  language  = {de}
}
@article{RosinButenwegKlinkel2016,
  author    = {Rosin, Julia and Butenweg, Christoph and Klinkel, Sven},
  title     = {Stabilit{\"a}tsnachweis f{\"u}r seismisch beanspruchte Tankbauwerke nach dem LBA/MNA-Konzept},
  series = {Bauingenieur},
  volume    = {91},
  journal   = {Bauingenieur},
  number    = {12},
  publisher = {VDI Fachmedien},
  address   = {D{\"u}sseldorf},
  issn      = {0005-6650},
  doi       = {10.37544/0005-6650-2016-12-74},
  pages     = {518 -- 526},
  year      = {2016},
  abstract  = {Eine seismische Anregung verursacht in einem Fl{\"u}ssigkeitstank einen kombinierten Spannungszustand, was zu einem Stabilit{\"a}tsversagen der h{\"a}ufig sehr d{\"u}nnwandigen Konstruktionen f{\"u}hren kann. F{\"u}r die Durchf{\"u}hrung von Stabilit{\"a}tsnachweisen stehen verschiedene Verfahren zur Verf{\"u}gung. {\"U}blicherweise werden aus Gr{\"u}nden der Einfachheit spannungsbasierte Verfahren angewendet. Diese sind f{\"u}r Einheitslastf{\"a}lle experimentell abgesichert, wobei eine {\"U}bertragung auf kombinierte Spannungszust{\"a}nde wie im Erdbebenfall nur begrenzt m{\"o}glich ist. Alternativ kann ein globales, numerisches Konzept, das LBA/MNA-Verfahren, angewendet werden. Das Verfahren kombiniert eine materiell nichtlineare Berechnung (MNA) mit einer linearen Beulanalyse (LBA) und erfasst die Interaktion verschiedener gleichzeitig auftretender Beanspruchungen implizit im Nachweis. Dieser Beitrag demonstriert die Anwendung der Verfahren am Beispiel verschiedener Tankgeometrien mit H{\"o}he/Radius-Verh{\"a}ltnissen zwischen 1 ≤ H/R ≤ 2 und Radius/Tankwand-Verh{\"a}ltnissen zwischen 500 ≤ R/t ≤ 1000 und diskutiert zus{\"a}tzlich die Defizite der spannungsbasierten Nachweisverfahren.},
  language  = {de}
}