@article{Gossla1998,
  author    = {Gossla, Ulrich},
  title     = {Mein Keller aus Stahlfaserbeton? Zur statischen Anrechenbarkeit von Stahlfasern},
  series = {Beton auf neuen Wegen / Braunschweiger Bauseminar 1998, 12. und 13. November. Wiss. Leitung: Horst Falkner ...},
  journal   = {Beton auf neuen Wegen / Braunschweiger Bauseminar 1998, 12. und 13. November. Wiss. Leitung: Horst Falkner ...},
  publisher = {IBMB},
  address   = {Braunschweig},
  isbn      = {3-89288-120-0},
  pages     = {83 -- 98},
  year      = {1998},
  language  = {de}
}
@article{GosslaBoescheBrunner2007,
  author    = {Gossla, Ulrich and B{\"o}sche, Thomas and Brunner, Andreas},
  title     = {Untersuchungen zur Verbesserung der Erkenntnisse {\"u}ber das Tragverhalten der Vorlandb{\"o}gen der Eisenbahn-Marienbr{\"u}cke Dresden / B{\"o}sche, Thomas ; Gossla, Ulrich ; Brunner, Andreas},
  series = {4. Symposium Experimentelle Untersuchungen von Baukonstruktionen : 27. September 2007 / Technische Universit{\"a}t Dresden, Fakult{\"a}t Bauingenieurwesen. [Hrsg. dieses Bd. Manfred Curbach ...].},
  journal   = {4. Symposium Experimentelle Untersuchungen von Baukonstruktionen : 27. September 2007 / Technische Universit{\"a}t Dresden, Fakult{\"a}t Bauingenieurwesen. [Hrsg. dieses Bd. Manfred Curbach ...].},
  publisher = {Techn. Univ., Fak. Bauingenieurwesen},
  address   = {Dresden},
  pages     = {103 -- 114},
  year      = {2007},
  language  = {de}
}
@article{HolthausSellheierBlecken2008,
  author    = {Holthaus-Sellheier, Ursula and Blecken, Udo},
  title     = {Nutzenkosten: DIN 18960-2008 - Leistungsf{\"a}hige Grundlage f{\"u}r die zielorientierte Planung der Lebenszykluskosten / Blecken, Udo ; Holthaus-Sellheier, Ursula},
  series = {Bautechnik. 85 (2008), H. 7},
  journal   = {Bautechnik. 85 (2008), H. 7},
  isbn      = {1437-0999},
  pages     = {464 -- 471},
  year      = {2008},
  language  = {de}
}
@article{Jochim2007,
  author    = {Jochim, Haldor E.},
  title     = {Beurteilung der Ausbaunotwendigkeit von Eisenbahn-Streckenabschnitten - ein anspruchsloses Verfahren},
  series = {Eisenbahn-Ingenieur-Kalender 2008 : EIK ; Jahrbuch f{\"u}r Schienenverkehr \& Technik / Hrsg. Verband Deutscher Eisenbahn-Ingenieure e.V., VDEI},
  journal   = {Eisenbahn-Ingenieur-Kalender 2008 : EIK ; Jahrbuch f{\"u}r Schienenverkehr \& Technik / Hrsg. Verband Deutscher Eisenbahn-Ingenieure e.V., VDEI},
  isbn      = {0934-5930},
  pages     = {333 -- 342},
  year      = {2007},
  language  = {de}
}
@article{BienerWernhoffBoekersetal.2008,
  author    = {Biener, Ernst and Wernhoff, T. and B{\"o}kers, H. and Sasse, T.},
  title     = {Bau und 7-j{\"a}hriger Betrieb eines Dichtungskontrollsystems sowie Durchf{\"u}hrung von Bew{\"a}sserungsmaßnahmen auf der Deponie Wesuwe / Wernhoff, T. ; B{\"o}kers, H. ; Biener, E. ; Sasse, T.},
  series = {Tagungsband / 3. Praxistagung Deponie 2008 : Zwischenlager - Deponien - Nachsorge ; 2. und 3. Dezember 2008 / Wasteconsult International. Matthias K{\"u}hle-Weidemeier (Hrsg.)},
  journal   = {Tagungsband / 3. Praxistagung Deponie 2008 : Zwischenlager - Deponien - Nachsorge ; 2. und 3. Dezember 2008 / Wasteconsult International. Matthias K{\"u}hle-Weidemeier (Hrsg.)},
  publisher = {Cuvillier},
  address   = {G{\"o}ttingen},
  isbn      = {978-3-86727-801-0},
  pages     = {157 -- 174},
  year      = {2008},
  language  = {de}
}
@article{BienerSasse2009,
  author    = {Biener, Ernst and Sasse, Torsten},
  title     = {Deponiebauprojekte gestern, heute und morgen : Ver{\"a}nderungen, Stand und Tendenzen aus der Sicht eines planenden Ingenieurb{\"u}ros / Sasse, Torsten ; Biener, Ernst},
  pages     = {1 -- 13},
  year      = {2009},
  language  = {de}
}
@article{DoeringKendrickLawson2013,
  author    = {D{\"o}ring, Bernd and Kendrick, C. and Lawson, R. M.},
  title     = {Thermal capacity of composite floor slabs},
  series = {Energy and buildings},
  volume    = {Vol. 67},
  journal   = {Energy and buildings},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1872-6178 (E-Journal); 0378-7788 (Print)},
  pages     = {531 -- 539},
  year      = {2013},
  language  = {en}
}
@article{HeggerClassenSchaumannetal.2013,
  author    = {Hegger, Josef and Claßen, Martin and Schaumann, Peter and Sothmann, J{\"o}rg and Feldmann, Markus and D{\"o}ring, Bernd},
  title     = {Entwicklung einer integrierten Verbunddecke f{\"u}r nachhaltige Stahlbauten},
  series = {Stahlbau},
  volume    = {Vol. 82},
  journal   = {Stahlbau},
  number    = {Iss. 1},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {11 -- 17},
  year      = {2013},
  language  = {de}
}
@article{HeggerClassenFeldmannetal.2011,
  author    = {Hegger, Josef and Claßen, Martin and Feldmann, Markus and D{\"o}ring, Bernd and Schaumann, Peter and Sothmann, J{\"o}rg and Bohne, Dirk and Hargus, Steen and Barben, Daniel and Aarden, Erik and Schielke, Sabine},
  title     = {Integrierte und nachhaltigkeitsorientierte Deckensysteme im Stahl- und Verbundbau},
  series = {Stahlbau},
  volume    = {Vol. 80},
  journal   = {Stahlbau},
  number    = {Iss. 10},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {728 -- 733},
  year      = {2011},
  language  = {de}
}
@article{DoeringFeldmannKuhnhenneetal.2011,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus and M{\"u}ller, Dirk},
  title     = {Phasenwechselmaterial im Metallleichtbau zur Optimierung von Energieeffizienz und sommerlicher Raumtemperatur},
  series = {Stahlbau},
  volume    = {Vol. 80},
  journal   = {Stahlbau},
  number    = {Iss. 9},
  publisher = {Wiley},
  address   = {Weinheim},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  pages     = {666 -- 672},
  year      = {2011},
  language  = {de}
}
@article{KuhnhenneDoeringKockeretal.2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Kocker, Ronald and Pyschny, Dominik and Feldmann, Markus},
  title     = {Die {\"O}kobilanz als Baustein der Nachhaltigkeitsbewertung im Industrie- und Gewerbebau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {6},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001336},
  pages     = {439 -- 447},
  year      = {2010},
  abstract  = {Im Herbst 2009 wurde das "Deutsche G{\"u}tesiegel Nachhaltiges Bauen" f{\"u}r die Geb{\"a}udetypen Industriebauten und Handelsbauten offiziell vorgestellt. Die {\"O}kobilanz als wichtiger Baustein der Nachhaltigkeitsbewertung wird somit auch im Industrie- und Gewerbebau zuk{\"u}nftig stark an Bedeutung gewinnen. Der vorliegende Beitrag beinhaltet einen Vergleich der Umweltleistung verschiedener Bauweisen des Industrie- und Gewerbebaus, die durch die {\"O}kobilanzierung quantifizierbar wird, anhand von momentan verf{\"u}gbaren Daten und Methoden. Es werden ausgew{\"a}hlte Ergebnisse sowie vorhandene Unsicherheiten und daraus resultierender Forschungsbedarf aufgezeigt.},
  language  = {de}
}
@article{KuhnhenneDoeringFeldmann2010,
  author    = {Kuhnhenne, Markus and D{\"o}ring, Bernd and Feldmann, Markus},
  title     = {Grunds{\"a}tze und L{\"o}sungen zur W{\"a}rmebr{\"u}ckenreduktion im Metallleichtbau},
  series = {Stahlbau},
  volume    = {79},
  journal   = {Stahlbau},
  number    = {5},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1437-1049 (E-Journal); 0038-9145 (Print)},
  doi       = {10.1002/stab.201001330},
  pages     = {345 -- 355},
  year      = {2010},
  abstract  = {Die Anforderungen an das energiesparende Bauen sind mit der Einf{\"u}hrung der Energieeinsparverordnung (EnEV) 2009 auch im Industrie- und Gewerbebau deutlich versch{\"a}rft worden. Einen wesentlichen Beitrag zur Energieeinsparung liefert die Minimierung des Transmissionsw{\"a}rmetransfers. Analysiert man Geb{\"a}udeh{\"u}llen in Metallleichtbauweise stellt man fest, dass eine Erh{\"o}hung der W{\"a}rmed{\"a}mmst{\"a}rke allein noch nicht zielf{\"u}hrend ist, zus{\"a}tzlich sind W{\"a}rmebr{\"u}ckeneffekte zu ber{\"u}cksichtigen und deren Einfl{\"u}sse auf die W{\"a}rmetransmission zu reduzieren. Neben der Bedeutung f{\"u}r die Energieeinsparung ist eine w{\"a}rmetechnisch optimierte Detailausbildung auch erforderlich, um einen ausreichenden Feuchteschutz (Vermeidung von Tauwasser und Schimmelpilz) zu realisieren und so Sch{\"a}den zu vermeiden. Ein wichtiges Hilfsmittel stellt hierzu der vom Industrieverband f{\"u}r Bausysteme im Metallleichtbau (IFBS) herausgegebene W{\"a}rmebr{\"u}ckenatlas der Metall-Sandwichbauweise dar.},
  language  = {de}
}
@article{DoeringFeldmannKuhnhenne2009,
  author    = {D{\"o}ring, Bernd and Feldmann, Markus and Kuhnhenne, Markus},
  title     = {Der Beitrag von Profilblechdecken zur passiven K{\"u}hlung},
  series = {Bauphysik},
  volume    = {Vol. 31},
  journal   = {Bauphysik},
  number    = {Iss. 2},
  publisher = {Wiley},
  address   = {Weinheim},
  isbn      = {1437-0980 (E-Journal); 0171-5445 (Print)},
  pages     = {65 -- 71},
  year      = {2009},
  language  = {de}
}
@article{DoeringKuhnhenneHellbergetal.2008,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Hellberg, Jan and Feldmann, Markus},
  title     = {Aktive und passive Temperierung eines Stahldeckensystems : thermische Bauteilaktivierung : numerische und messtechnische Untersuchungen. T. 2.},
  series = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 59},
  journal   = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 11},
  issn      = {1436-5103},
  pages     = {37 -- 41},
  year      = {2008},
  language  = {de}
}
@article{DoeringKuhnhenneHellbergetal.2008,
  author    = {D{\"o}ring, Bernd and Kuhnhenne, Markus and Hellberg, Jan and Feldmann, Markus},
  title     = {Aktive und passive Temperierung eines Stahldeckensystems : numerische und messtechnische Untersuchungen. T. 1},
  series = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Bd. 59},
  journal   = {HLH : L{\"u}ftung, Klima, Heizung, Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {H. 10},
  issn      = {1436-5103, 0017-9906, 1434-422X, 1436-5103},
  pages     = {54 -- 60},
  year      = {2008},
  language  = {de}
}
@article{FeldmannDoeringKuhnhenneetal.2008,
  author    = {Feldmann, Markus and D{\"o}ring, Bernd and Kuhnhenne, Markus and Sedlacek, Gerhard},
  title     = {Zum Thema "Nachhaltigkeit" in der Stahlbauindustrie},
  series = {Stahlbau},
  volume    = {Vol. 77},
  journal   = {Stahlbau},
  number    = {Iss. 10},
  issn      = {0038-9145},
  pages     = {713 -- 720},
  year      = {2008},
  language  = {de}
}
@article{DoeringHechlerWeberetal.2004,
  author    = {D{\"o}ring, Bernd and Hechler, O. and Weber, F. and Sedlacek, Gerhard},
  title     = {Thermische Aktivierung von Fertigteildecken},
  series = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  volume    = {Jg. 55},
  journal   = {HLH L{\"u}ftung/Klima, Heizung/Sanit{\"a}r, Geb{\"a}udetechnik},
  number    = {Nr. 5},
  issn      = {1436-5103},
  pages     = {24 -- 35},
  year      = {2004},
  language  = {de}
}
@article{ZillerDoering2004,
  author    = {Ziller, Claudia and D{\"o}ring, Bernd},
  title     = {Doppelfassaden - vom Experimentalmodell zum Massanzug},
  series = {TAB Technik am Bau},
  volume    = {Bd. 35},
  journal   = {TAB Technik am Bau},
  number    = {H. 12},
  issn      = {0341-2032},
  pages     = {58 -- 63},
  year      = {2004},
  language  = {de}
}
@article{ThielDoering2001,
  author    = {Thiel, Dieter and D{\"o}ring, Bernd},
  title     = {Dezentrale Raumklimatisierung durch die Fassade},
  series = {TAB Technik am Bau},
  volume    = {Bd. 32},
  journal   = {TAB Technik am Bau},
  number    = {H. 3},
  issn      = {0341-2032},
  pages     = {67 -- 76},
  year      = {2001},
  language  = {de}
}
@article{KuckDoering1997,
  author    = {Kuck, Herbert and D{\"o}ring, Bernd},
  title     = {Regenerative Energien in Landesbauten : Land NRW unterst{\"u}tzt Einsatz erneuerbarer Energien 1997 mit 15 Mio. DM},
  series = {Die Bauverwaltung mit Bauamt und Gemeindebau},
  volume    = {Bd. 70},
  journal   = {Die Bauverwaltung mit Bauamt und Gemeindebau},
  number    = {H. 8},
  issn      = {0005-6847},
  pages     = {384 -- 386},
  year      = {1997},
  language  = {de}
}
@article{DoeringRegerKuhnhenneetal.2015,
  author    = {D{\"o}ring, Bernd and Reger, Vitali and Kuhnhenne, Markus and Feldmann, Markus and Kesti, Jyrki and Lawson, Mark and Botti, Andrea},
  title     = {Steel solutions for enabling zero-energy buildings},
  series = {Steel Construction - Design and Research},
  volume    = {8},
  journal   = {Steel Construction - Design and Research},
  number    = {3},
  publisher = {Ernst \& Sohn},
  address   = {Berlin},
  issn      = {1867-0539},
  doi       = {10.1002/stco.201510029},
  pages     = {194 -- 200},
  year      = {2015},
  language  = {en}
}
@article{GieseKirschZiegler2006,
  author    = {Giese, S. and Kirsch, Ansgar and Ziegler, M.},
  title     = {Numerische Untersuchung von Schervorg{\"a}ngen mit der Diskrete-Partikel-Methode},
  series = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  volume    = {Bd. 81},
  journal   = {Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik},
  number    = {H. 5},
  issn      = {0005-6650},
  pages     = {232 -- 239},
  year      = {2006},
  language  = {de}
}
@article{KirschKolymbas2005,
  author    = {Kirsch, Ansgar and Kolymbas, Dimitrios},
  title     = {Theoretische Untersuchung zur Ortsbruststabilit{\"a}t},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Bd. 82},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {H. 7},
  issn      = {1437-0999 (E-Journal); 0005-6820 (Print); 0932-8351 (Print)},
  doi       = {10.1002/bate.200590151},
  pages     = {449 -- 456},
  year      = {2005},
  language  = {de}
}
@article{MalechaKlubertHeinenFuchs2014,
  author    = {Malecha, Hartmut and Klubert, J. and Heinen-Fuchs, Sabine},
  title     = {Laserscanning passe? 3-D-Oberfl{\"a}chenmodelle aus Bilddaten und deren messtechnischer Nutzen},
  series = {Wasserwirtschaft},
  volume    = {Jg. 104},
  journal   = {Wasserwirtschaft},
  number    = {Nr. 9},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {32 -- 35},
  year      = {2014},
  language  = {de}
}
@article{MeinzingerBagayokoKoch2003,
  author    = {Meinzinger, Michael and Bagayoko, Lamine and Koch, Eckart},
  title     = {Die Lagerung der Lehrter Bahnhofsbr{\"u}cken},
  series = {Bauingenieur},
  volume    = {Bd. 78},
  journal   = {Bauingenieur},
  number    = {H. 2},
  issn      = {1436-4867 (E-Journal); 0005-6650 (Print)},
  pages     = {73 -- 85},
  year      = {2003},
  language  = {de}
}
@article{DemnyHebel2014,
  author    = {Demny, Andreas and Hebel, Christoph},
  title     = {Rechnergest{\"u}tzte Ermittlung der Verbindungsfunktionsstufen und der verbindungsbezogenen Angebotsqualit{\"a}t nach den Richtlinien f{\"u}r integrierte Netzgestaltung nach RIN 2008},
  series = {Straßenverkehrstechnik : Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr ; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  volume    = {Jg. 58},
  journal   = {Straßenverkehrstechnik : Organ der Forschungsgesellschaft f{\"u}r Straßen- und Verkehrswesen, der Bundesvereinigung der Straßenbau- und Verkehrsingenieure und der {\"O}sterreichischen Forschungsgesellschaft Straße und Verkehr ; Zeitschrift f{\"u}r Verkehrsplanung, Verkehrsmanagement, Verkehrssicherheit, Verkehrstechnik},
  number    = {H. 12},
  publisher = {Kirschbaum Verlag},
  address   = {Bonn},
  issn      = {0039-2219},
  pages     = {811 -- 820},
  year      = {2014},
  language  = {de}
}
@article{FellinKingKirschetal.2010,
  author    = {Fellin, Wolfgang and King, Julian and Kirsch, Ansgar and Oberguggenberger, Michael},
  title     = {Uncertainty modelling and sensitivity analysis of tunnel face stability},
  series = {Structural safety},
  volume    = {32},
  journal   = {Structural safety},
  number    = {6},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-4730},
  doi       = {10.1016/j.strusafe.2010.06.001},
  pages     = {402 -- 410},
  year      = {2010},
  abstract  = {This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.},
  language  = {en}
}
@article{Kirsch2010,
  author    = {Kirsch, Ansgar},
  title     = {Experimental investigation of the face stability of shallow tunnels in sand},
  series = {Acta Geotechnica},
  volume    = {5},
  journal   = {Acta Geotechnica},
  number    = {1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1861-1125},
  doi       = {10.1007/s11440-010-0110-7},
  pages     = {43 -- 62},
  year      = {2010},
  abstract  = {Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small-scale model tests at single gravity. The development of the failure mechanism and the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially, loose sand did not show any discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Those by Vermeer/Ruse and L{\´e}ca/Dormieux showed the best agreement to the measurements.},
  language  = {en}
}
@article{KolymbasKirsch2009,
  author    = {Kolymbas, Dimitrios and Kirsch, Ansgar},
  title     = {Zum Erddruck auf Lawinenschutzgalerien},
  series = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  volume    = {Vol. 86},
  journal   = {Bautechnik : Zeitschrift f{\"u}r den gesamten Ingenieurbau},
  number    = {Iss. 12},
  issn      = {1437-0999 (E-Journal); 0005-6820 (Print); 0932-8351 (Print)},
  doi       = {10.1002/bate.200910075},
  pages     = {774 -- 779},
  year      = {2009},
  language  = {de}
}
@article{KirschPiazzi2009,
  author    = {Kirsch, Ansgar and Piazzi, Lukas},
  title     = {Numerical investigation of the effectiveness of a bored pile wall for the minimisation of settlement resulting from tunnel driving},
  series = {Geomechanics and tunnelling},
  volume    = {Vol. 2},
  journal   = {Geomechanics and tunnelling},
  number    = {Iss. 6},
  issn      = {1865-7362},
  doi       = {10.1002/geot.200900063},
  pages     = {753 -- 765},
  year      = {2009},
  language  = {de}
}
@article{Kirsch2008,
  author    = {Kirsch, Ansgar},
  title     = {Experimentelle Untersuchung des Ortsbrustversagens seichter Tunnel},
  series = {{\"O}sterreichische Bauwirtschaft},
  journal   = {{\"O}sterreichische Bauwirtschaft},
  number    = {Sondernr.},
  pages     = {6 -- 9},
  year      = {2008},
  language  = {de}
}
@article{KolymbasFellinKirsch2006,
  author    = {Kolymbas, Dimitrios and Fellin, W. and Kirsch, Ansgar},
  title     = {Squeezing due to stress relaxation in foliated rock},
  series = {International journal for numerical and analytical methods in geomechanics},
  volume    = {Vol. 30},
  journal   = {International journal for numerical and analytical methods in geomechanics},
  number    = {Iss. 13},
  issn      = {1096-9853 (E-Journal); 0363-9061 (Print)},
  doi       = {10.1002/nag.530},
  pages     = {1357 -- 1367},
  year      = {2006},
  language  = {en}
}
@article{BayonValeroGarciaBartualetal.2016,
  author    = {Bayon, Arnau and Valero, Daniel and Garcia-Bartual, Rafael and Vall{\´e}s-Mor{\´a}n, Francisco Jos{\´e} and L{\´o}pez-Jim{\´e}nez, P. Amparo},
  title     = {Performance assessment of OpenFOAM and FLOW-3D in the numerical modeling of a low Reynolds number hydraulic jump},
  series = {Environmental Modelling \& Software},
  volume    = {80},
  journal   = {Environmental Modelling \& Software},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1364-8152},
  doi       = {10.1016/j.envsoft.2016.02.018},
  pages     = {322 -- 335},
  year      = {2016},
  abstract  = {A comparative performance analysis of the CFD platforms OpenFOAM and FLOW-3D is presented, focusing on a 3D swirling turbulent flow: a steady hydraulic jump at low Reynolds number. Turbulence is treated using RANS approach RNG k-ε. A Volume Of Fluid (VOF) method is used to track the air-water interface, consequently aeration is modeled using an Eulerian-Eulerian approach. Structured meshes of cubic elements are used to discretize the channel geometry. The numerical model accuracy is assessed comparing representative hydraulic jump variables (sequent depth ratio, roller length, mean velocity profiles, velocity decay or free surface profile) to experimental data. The model results are also compared to previous studies to broaden the result validation. Both codes reproduced the phenomenon under study concurring with experimental data, although special care must be taken when swirling flows occur. Both models can be used to reproduce the hydraulic performance of energy dissipation structures at low Reynolds numbers.},
  language  = {en}
}
@article{Bung2024,
  author    = {Bung, Daniel Bernhard},
  title     = {Kamerabasierte Fließtiefen- und Geschwindigkeitsmessungen},
  series = {Wasserwirtschaft},
  volume    = {114},
  journal   = {Wasserwirtschaft},
  number    = {4},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  issn      = {0043-0978},
  pages     = {47 -- 53},
  year      = {2024},
  abstract  = {In der wasserbaulichen Forschung werden neben klassischen Messinstrumenten zunehmend kamerabasierte Verfahren genutzt. Diese erlauben neben der Bestimmung von Fließgeschwindigkeiten auch die Detektion der freien Wasseroberfl{\"a}che oder zeitliche Vermessung von Kolken. Durch die hohen r{\"a}umlichen und zeitlichen Aufl{\"o}sungen, welche neueste Kamerasensoren liefern, k{\"o}nnen neue Erkenntnisse in turbulenten, komplexen Str{\"o}mungen gewonnen werden. Auch in der Praxis k{\"o}nnen diese Verfahren mit geringem Aufwand wichtige Daten liefern.},
  language  = {de}
}
@article{ZhangValeroBungetal.2018,
  author    = {Zhang, G. and Valero, Daniel and Bung, Daniel Bernhard and Chanson, H.},
  title     = {On the estimation of free-surface turbulence using ultrasonic sensors},
  series = {Flow Measurement and Instrumentation},
  volume    = {60},
  journal   = {Flow Measurement and Instrumentation},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0955-5986},
  doi       = {10.1016/j.flowmeasinst.2018.02.009},
  pages     = {171 -- 184},
  year      = {2018},
  abstract  = {Accurate determination of free-surface dynamics has attracted much research attention during the past decade and has important applications in many environmental and water related areas. In this study, the free-surface dynamics in several turbulent flows commonly found in nature were investigated using a synchronised setup consisting of an ultrasonic sensor and a high-speed video camera. Basic sensor capabilities were examined in dry conditions to allow for a better characterisation of the present sensor model. The ultrasonic sensor was found to adequately reproduce free-surface dynamics up to the second order, especially in two-dimensional scenarios with the most energetic modes in the low frequency range. The sensor frequency response was satisfactory in the sub-20 Hz band, and its signal quality may be further improved by low-pass filtering prior to digitisation. The application of the USS to characterise entrapped air in high-velocity flows is also discussed.},
  language  = {en}
}
@article{BungErpicumTullis2020,
  author    = {Bung, Daniel Bernhard and Erpicum, S{\´e}bastien and Tullis, Blanke P.},
  title     = {Advances in hydraulic structures engineering},
  series = {Journal of Hydraulic Engineering},
  volume    = {147},
  journal   = {Journal of Hydraulic Engineering},
  number    = {1},
  publisher = {ASCE},
  address   = {Reston, Va.},
  issn      = {0733-9429 (Druckausgabe)},
  doi       = {10.1061/(ASCE)HY.1943-7900.0001851},
  pages     = {1 Seite},
  year      = {2020},
  language  = {en}
}
@article{Bung2011,
  author    = {Bung, Daniel Bernhard},
  title     = {Fließcharakteristik und Sauerstoffeintrag bei selbstbel{\"u}fteten Gerinnestr{\"o}mungen auf Kaskaden mit gem{\"a}ßigter Neigung},
  series = {{\"O}sterreichische Wasser- und Abfallwirtschaft},
  volume    = {Vol. 63},
  journal   = {{\"O}sterreichische Wasser- und Abfallwirtschaft},
  number    = {Iss. 3-4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1613-7566 (E-Journal); 0945-358X (Print)},
  pages     = {76 -- 81},
  year      = {2011},
  language  = {de}
}
@article{ValeroChansonBung2019,
  author    = {Valero, Daniel and Chanson, Hubert and Bung, Daniel Bernhard},
  title     = {Robust estimators for turbulence properties assessment},
  pages     = {1 -- 24},
  year      = {2019},
  language  = {en}
}
@article{HagenkampBlankeDoering2021,
  author    = {Hagenkamp, Markus and Blanke, Tobias and D{\"o}ring, Bernd},
  title     = {Thermoelectric building temperature control: a potential assessment},
  series = {International Journal of Energy and Environmental Engineering},
  volume    = {13},
  journal   = {International Journal of Energy and Environmental Engineering},
  publisher = {Springer},
  address   = {Berlin},
  doi       = {10.1007/s40095-021-00424-x},
  pages     = {241 -- 254},
  year      = {2021},
  abstract  = {This study focuses on thermoelectric elements (TEE) as an alternative for room temperature control. TEE are semi-conductor devices that can provide heating and cooling via a heat pump effect without direct noise emissions and no refrigerant use. An efficiency evaluation of the optimal operating mode is carried out for different numbers of TEE, ambient temperatures, and heating loads. The influence of an additional heat recovery unit on system efficiency and an unevenly distributed heating demand are examined. The results show that TEE can provide heat at a coefficient of performance (COP) greater than one especially for small heating demands and high ambient temperatures. The efficiency increases with the number of elements in the system and is subject to economies of scale. The best COP exceeds six at optimal operating conditions. An additional heat recovery unit proves beneficial for low ambient temperatures and systems with few TEE. It makes COPs above one possible at ambient temperatures below 0 ∘C. The effect increases efficiency by maximal 0.81 (from 1.90 to 2.71) at ambient temperature 5 K below room temperature and heating demand Q˙h=100W but is subject to diseconomies of scale. Thermoelectric technology is a valuable option for electricity-based heat supply and can provide cooling and ventilation functions. A careful system design as well as an additional heat recovery unit significantly benefits the performance. This makes TEE superior to direct current heating systems and competitive to heat pumps for small scale applications with focus on avoiding noise and harmful refrigerants.},
  language  = {en}
}
@article{KerpenBungValeroetal.2017,
  author    = {Kerpen, Nils B. and Bung, Daniel Bernhard and Valero, Daniel and Schlurmann, Torsten},
  title     = {Energy dissipation within the wave run-up at stepped revetments},
  series = {Journal of Ocean University of China},
  volume    = {16},
  journal   = {Journal of Ocean University of China},
  number    = {4},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {1993-5021},
  doi       = {10.1007/s11802-017-3355-z},
  pages     = {649 -- 654},
  year      = {2017},
  language  = {en}
}
@article{ValeroBung2016,
  author    = {Valero, Daniel and Bung, Daniel Bernhard},
  title     = {Development of the interfacial air layer in the non-aerated region of high-velocity spillway flows: Instabilities growth, entrapped air and influence on the self-aeration onset},
  series = {International Journal of Multiphase Flow},
  volume    = {84},
  journal   = {International Journal of Multiphase Flow},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0301-9322},
  doi       = {10.1016/j.ijmultiphaseflow.2016.04.012},
  pages     = {66 -- 74},
  year      = {2016},
  abstract  = {Self-aeration is traditionally explained by the water turbulent boundary layer outer edge intersection with the free surface. This paper presents a discussion on the commonly accepted hypothesis behind the computation of the critical point of self-aeration in spillway flows and a new formulation is proposed based on the existence of a developing air flow over the free surface. Upstream of the inception point of self-aeration, some surface roughening has been often reported in previous studies which consequently implies some entrapped air transport and air-water flows coupling. Such air flow is proven in this study by presenting measured air velocities and computing the air boundary layer thickness for a 1V:2H smooth chute flow. Additionally, the growth rate of free surface waves has been analysed by means of Ultrasonic Sensors measurements, obtaining also the entrapped air concentration. High-speed camera imaging has been used for qualitative study of the flow perturbations.},
  language  = {en}
}
@article{Bung2013,
  author    = {Bung, Daniel Bernhard},
  title     = {Non-intrusive detection of air-water surface roughness in self-aerated chute flows},
  series = {Journal of hydraulic research},
  volume    = {Vol. 51},
  journal   = {Journal of hydraulic research},
  number    = {Iss. 3},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  pages     = {322 -- 329},
  year      = {2013},
  language  = {en}
}
@article{Bung2021,
  author    = {Bung, Daniel Bernhard},
  title     = {Extreme flooding in Western Germany: some thoughts on hazards, return periods and risk},
  series = {Hydrolink},
  journal   = {Hydrolink},
  number    = {4},
  publisher = {International Association for Hydro-Environment Engineering and Research (IAHR)},
  address   = {Madrid},
  pages     = {108 -- 113},
  year      = {2021},
  abstract  = {The low-pressure system Bernd involved extreme rainfalls in the Western part of Germany in July 2021, resulting in major floods, severe damages and a tremendous number of casualties. Such extreme events are rare and full flood protection can never be ensured with reasonable financial means. But still, this event must be starting point to reconsider current design concepts. This article aims at sharing some thoughts on potential hazards, the selection of return periods and remaining risk with the focus on Germany.},
  language  = {en}
}
@article{Bung2011,
  author    = {Bung, Daniel Bernhard},
  title     = {Developing flow in skimming flow regime on embankment stepped spillways},
  series = {Journal of hydraulic research},
  volume    = {Vol. 49},
  journal   = {Journal of hydraulic research},
  number    = {Iss. 5},
  publisher = {Taylor \& Francis},
  address   = {London},
  issn      = {1814-2079 (E-Journal); 0022-1686 (Print)},
  pages     = {639 -- 648},
  year      = {2011},
  language  = {en}
}
@article{WoliszSchuetzBlankeetal.2017,
  author    = {Wolisz, Henryk and Sch{\"u}tz, Thomas and Blanke, Tobias and Hagenkamp, Markus and Kohrn, Markus and Wesseling, Mark and M{\"u}ller, Dirk},
  title     = {Cost optimal sizing of smart buildings' energy system components considering changing end-consumer electricity markets},
  series = {Energy},
  volume    = {137},
  journal   = {Energy},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.energy.2017.06.025},
  pages     = {715 -- 728},
  year      = {2017},
  language  = {en}
}
@article{BlankeHagenkampDoeringetal.2021,
  author    = {Blanke, Tobias and Hagenkamp, Markus and D{\"o}ring, Bernd and G{\"o}ttsche, Joachim and Reger, Vitali and Kuhnhenne, Markus},
  title     = {Net-exergetic, hydraulic and thermal optimization of coaxial heat exchangers using fixed flow conditions instead of fixed flow rates},
  series = {Geothermal Energy},
  volume    = {9},
  journal   = {Geothermal Energy},
  number    = {Article number: 19},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {2195-9706},
  doi       = {10.1186/s40517-021-00201-3},
  pages     = {23 Seiten},
  year      = {2021},
  abstract  = {Previous studies optimized the dimensions of coaxial heat exchangers using constant mass fow rates as a boundary condition. They show a thermal optimal circular ring width of nearly zero. Hydraulically optimal is an inner to outer pipe radius ratio of 0.65 for turbulent and 0.68 for laminar fow types. In contrast, in this study, fow conditions in the circular ring are kept constant (a set of fxed Reynolds numbers) during optimization. This approach ensures fxed fow conditions and prevents inappropriately high or low mass fow rates. The optimization is carried out for three objectives: Maximum energy gain, minimum hydraulic efort and eventually optimum net-exergy balance. The optimization changes the inner pipe radius and mass fow rate but not the Reynolds number of the circular ring. The thermal calculations base on Hellstr{\"o}m's borehole resistance and the hydraulic optimization on individually calculated linear loss of head coefcients. Increasing the inner pipe radius results in decreased hydraulic losses in the inner pipe but increased losses in the circular ring. The net-exergy diference is a key performance indicator and combines thermal and hydraulic calculations. It is the difference between thermal exergy fux and hydraulic efort. The Reynolds number in the circular ring is instead of the mass fow rate constant during all optimizations. The result from a thermal perspective is an optimal width of the circular ring of nearly zero. The hydraulically optimal inner pipe radius is 54\% of the outer pipe radius for laminar fow and 60\% for turbulent fow scenarios. Net-exergetic optimization shows a predominant infuence of hydraulic losses, especially for small temperature gains. The exact result depends on the earth's thermal properties and the fow type. Conclusively, coaxial geothermal probes' design should focus on the hydraulic optimum and take the thermal optimum as a secondary criterion due to the dominating hydraulics.},
  language  = {en}
}
@article{CheenakulaGriebelMontagetal.2023,
  author    = {Cheenakula, Dheeraja and Griebel, Kai and Montag, David and Gr{\"o}mping, Markus},
  title     = {Concept development of a mainstream deammonification and comparison with conventional process in terms of energy, performance and economical construction perspectives},
  series = {Frontiers in Microbiology},
  volume    = {14},
  journal   = {Frontiers in Microbiology},
  number    = {11155235},
  editor    = {Huang, Xiaowu},
  publisher = {Frontiers},
  issn      = {1664-302X},
  doi       = {10.3389/fmicb.2023.1155235},
  pages     = {1 -- 15},
  year      = {2023},
  abstract  = {Deammonification for nitrogen removal in municipal wastewater in temperate and cold climate zones is currently limited to the side stream of municipal wastewater treatment plants (MWWTP). This study developed a conceptual model of a mainstream deammonification plant, designed for 30,000 P.E., considering possible solutions corresponding to the challenging mainstream conditions in Germany. In addition, the energy-saving potential, nitrogen elimination performance and construction-related costs of mainstream deammonification were compared to a conventional plant model, having a single-stage activated sludge process with upstream denitrification. The results revealed that an additional treatment step by combining chemical precipitation and ultra-fine screening is advantageous prior the mainstream deammonification. Hereby chemical oxygen demand (COD) can be reduced by 80\% so that the COD:N ratio can be reduced from 12 to 2.5. Laboratory experiments testing mainstream conditions of temperature (8-20°C), pH (6-9) and COD:N ratio (1-6) showed an achievable volumetric nitrogen removal rate (VNRR) of at least 50 gN/(m3∙d) for various deammonifying sludges from side stream deammonification systems in the state of North Rhine-Westphalia, Germany, where m3 denotes reactor volume. Assuming a retained Norganic content of 0.0035 kgNorg./(P.E.∙d) from the daily loads of N at carbon removal stage and a VNRR of 50 gN/(m3∙d) under mainstream conditions, a resident-specific reactor volume of 0.115 m3/(P.E.) is required for mainstream deammonification. This is in the same order of magnitude as the conventional activated sludge process, i.e., 0.173 m3/(P.E.) for an MWWTP of size class of 4. The conventional plant model yielded a total specific electricity demand of 35 kWh/(P.E.∙a) for the operation of the whole MWWTP and an energy recovery potential of 15.8 kWh/(P.E.∙a) through anaerobic digestion. In contrast, the developed mainstream deammonification model plant would require only a 21.5 kWh/(P.E.∙a) energy demand and result in 24 kWh/(P.E.∙a) energy recovery potential, enabling the mainstream deammonification model plant to be self-sufficient. The retrofitting costs for the implementation of mainstream deammonification in existing conventional MWWTPs are nearly negligible as the existing units like activated sludge reactors, aerators and monitoring technology are reusable. However, the mainstream deammonification must meet the performance requirement of VNRR of about 50 gN/(m3∙d) in this case.},
  language  = {en}
}
@article{Krause2006,
  author    = {Krause, Thomas},
  title     = {Schalung und Ger{\"u}ste},
  series = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].},
  journal   = {Beispiele f{\"u}r die Baubetriebspraxis / Hoffmann, Manfred ; Kuhlmann, Willy [Hrsg.].},
  publisher = {Teubner},
  address   = {Wiesbaden},
  isbn      = {978-3-8351-0002-2},
  pages     = {122 -- 131},
  year      = {2006},
  language  = {de}
}
@article{OertelBung2015,
  author    = {Oertel, Mario and Bung, Daniel Bernhard},
  title     = {Stability and scour development of bed material on crossbar block ramps},
  series = {International journal of sediment research},
  volume    = {30},
  journal   = {International journal of sediment research},
  number    = {4},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1001-6279},
  doi       = {10.1016/j.ijsrc.2014.12.003},
  pages     = {344 -- 350},
  year      = {2015},
  abstract  = {Block ramps are ecologically oriented drop structures with adequate energy dissipation and partially moderate flow velocities. A special case is given with crossbar block ramps, where the upstream and downstream level difference is reduced by a series of basins. To prevent the total structure from failing, the stability of single boulders within the crossbars and the bed material in between must be guaranteed. The present paper addresses the stability of bed material and scour development for various flow regimes. Any bed material erosion may affect the stability of the crossbar boulders, which in turn can result in major damages of the ramp. Therefore new design approaches are developed to choose an appropriate bed material size and to avoid failures of crossbar block ramp structures.},
  language  = {en}
}
@article{ValeroBung2018,
  author    = {Valero, Daniel and Bung, Daniel Bernhard},
  title     = {Reformulating self-aeration in hydraulic structures: Turbulent growth of free surface perturbations leading to air entrainment},
  series = {International Journal of Multiphase Flow},
  volume    = {100},
  journal   = {International Journal of Multiphase Flow},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0301-9322},
  doi       = {10.1016/j.ijmultiphaseflow.2017.12.011},
  pages     = {127 -- 142},
  year      = {2018},
  abstract  = {A new formulation for the prediction of free surface dynamics related to the turbulence occurring nearby is proposed. This formulation, altogether with a breakup criterion, can be used to compute the inception of self-aeration in high velocity flows like those occurring in hydraulic structures. Assuming a simple perturbation geometry, a kinematic and a non-linear momentum-based dynamic equation are formulated and forces acting on a control volume are approximated. Limiting steepness is proposed as an adequate breakup criterion. Role of the velocity fluctuations normal to the free surface is shown to be the main turbulence quantity related to self-aeration and the role of the scales contained in the turbulence spectrum are depicted. Surface tension force is integrated accounting for large displacements by using differential geometry for the curvature estimation. Gravity and pressure effects are also contemplated in the proposed formulation. The obtained equations can be numerically integrated for each wavelength, hence resulting in different growth rates and allowing computation of the free surface roughness wavelength distribution. Application to a prototype scale spillway (at the Aviemore dam) revealed that most unstable wavelength was close to the Taylor lengthscale. Amplitude distributions have been also obtained observing different scaling for perturbations stabilized by gravity or surface tension. The proposed theoretical framework represents a new conceptualization of self-aeration which explains the characteristic rough surface at the non-aerated region as well as other previous experimental observations which remained unresolved for several decades.},
  language  = {en}
}