@article{CiritsisHorbachStaatetal.2018,
  author    = {Ciritsis, Alexander and Horbach, Andreas and Staat, Manfred and Kuhl, Christiane K. and Kraemer, Nils Andreas},
  title     = {Porosity and tissue integration of elastic mesh implants evaluated in vitro and in vivo},
  series = {Journal of Biomedical Materials Research: Part B: Applied Biomaterials},
  volume    = {106},
  journal   = {Journal of Biomedical Materials Research: Part B: Applied Biomaterials},
  number    = {2},
  publisher = {Wiley},
  address   = {New York, NY},
  issn      = {1552-4981},
  doi       = {10.1002/jbm.b.33877},
  pages     = {827 -- 833},
  year      = {2018},
  abstract  = {Purpose In vivo, a loss of mesh porosity triggers scar tissue formation and restricts functionality. The purpose of this study was to evaluate the properties and configuration changes as mesh deformation and mesh shrinkage of a soft mesh implant compared with a conventional stiff mesh implant in vitro and in a porcine model. Material and Methods Tensile tests and digital image correlation were used to determine the textile porosity for both mesh types in vitro. A group of three pigs each were treated with magnetic resonance imaging (MRI) visible conventional stiff polyvinylidene fluoride meshes (PVDF) or with soft thermoplastic polyurethane meshes (TPU) (FEG Textiltechnik mbH, Aachen, Germany), respectively. MRI was performed with a pneumoperitoneum at a pressure of 0 and 15 mmHg, which resulted in bulging of the abdomen. The mesh-induced signal voids were semiautomatically segmented and the mesh areas were determined. With the deformations assessed in both mesh types at both pressure conditions, the porosity change of the meshes after 8 weeks of ingrowth was calculated as an indicator of preserved elastic properties. The explanted specimens were examined histologically for the maturity of the scar (collagen I/III ratio). Results In TPU, the in vitro porosity increased constantly, in PVDF, a loss of porosity was observed under mild stresses. In vivo, the mean mesh areas of TPU were 206.8 cm2 (± 5.7 cm2) at 0 mmHg pneumoperitoneum and 274.6 cm2 (± 5.2 cm2) at 15 mmHg; for PVDF the mean areas were 205.5 cm2 (± 8.8 cm2) and 221.5 cm2 (± 11.8 cm2), respectively. The pneumoperitoneum-induced pressure increase resulted in a calculated porosity increase of 8.4\% for TPU and of 1.2\% for PVDF. The mean collagen I/III ratio was 8.7 (± 0.5) for TPU and 4.7 (± 0.7) for PVDF. Conclusion The elastic properties of TPU mesh implants result in improved tissue integration compared to conventional PVDF meshes, and they adapt more efficiently to the abdominal wall. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 827-833, 2018.},
  language  = {en}
}
@article{StaatBallmann1988,
  author    = {Staat, Manfred and Ballmann, J.},
  title     = {Computation of impacts on elastic solids by methods of bicharacteristics},
  series = {Computational Mechanics '88 : theory and applications ; proceedings of the International Conference on Computational Engineering Science April 10-14, 1988, Atlanta, GA, USA ; vol. 2},
  journal   = {Computational Mechanics '88 : theory and applications ; proceedings of the International Conference on Computational Engineering Science April 10-14, 1988, Atlanta, GA, USA ; vol. 2},
  pages     = {1719 -- 1722},
  year      = {1988},
  abstract  = {Shock waves, explosions, impacts or cavitation bubble collapses may generate stress waves in solids causing cracks or unexpected dammage due to focussing, physical nonlinearity or interaction with existing cracks. There is a growing interest in wave propagation, which poses many novel problems to experimentalists and theorists.},
  subject      = {Bicharakteristikenverfahren},
  language  = {en}
}
@article{Staat2000,
  author    = {Staat, Manfred},
  title     = {Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material},
  year      = {2000},
  abstract  = {Limit and shakedown analysis are effective methods for assessing the load carrying capacity of a given structure. The elasto-plastic behavior of the structure subjected to loads varying in a given load domain is characterized by the shakedown load factor, defined as the maximum factor which satisfies the sufficient conditions stated in the corresponding static shakedown theorem. The finite element dicretization of the problem may lead to very large convex optimization. For the effective solution a basis reduction method has been developed that makes use of the special problem structure for perfectly plastic material. The paper proposes a modified basis reduction method for direct application to the two-surface plasticity model of bounded kinematic hardening material. The considered numerical examples show an enlargement of the load carrying capacity due to bounded hardening.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{StaatHeitzerLangetal.2005,
  author    = {Staat, Manfred and Heitzer, M. and Lang, H. and Wirtz, K.},
  title     = {Direct Finite Element Route for Design-by-Analysis of Pressure Components},
  series = {International Journal of Pressure Vessels and Piping. 82 (2005), H. 1},
  journal   = {International Journal of Pressure Vessels and Piping. 82 (2005), H. 1},
  isbn      = {0308-0161},
  pages     = {61 -- 67},
  year      = {2005},
  language  = {en}
}
@article{PogorelovaRogachevDigeletal.2020,
  author    = {Pogorelova, Natalia and Rogachev, Evgeniy and Digel, Ilya and Chernigova, Svetlana and Nardin, Dmitry},
  title     = {Bacterial Cellulose Nanocomposites: Morphology and Mechanical Properties},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {12},
  publisher = {MDPI},
  address   = {Basel},
  isbn      = {1996-1944},
  doi       = {10.3390/ma13122849},
  pages     = {1 -- 16},
  year      = {2020},
  abstract  = {Bacterial cellulose (BC) is a promising material for biomedical applications due to its unique properties such as high mechanical strength and biocompatibility. This article describes the microbiological synthesis, modification, and characterization of the obtained BC-nanocomposites originating from symbiotic consortium Medusomyces gisevii. Two BC-modifications have been obtained: BC-Ag and BC-calcium phosphate (BC-Ca3(PO4)2). Structure and physicochemical properties of the BC and its modifications were investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), and infrared Fourier spectroscopy as well as by measurements of mechanical and water holding/absorbing capacities. Topographic analysis of the surface revealed multicomponent thick fibrils (150-160 nm in diameter and about 15 µm in length) constituted by 50-60 nm nanofibrils weaved into a left-hand helix. Distinctive features of Ca-phosphate-modified BC samples were (a) the presence of 500-700 nm entanglements and (b) inclusions of Ca3(PO4)2 crystals. The samples impregnated with Ag nanoparticles exhibited numerous roundish inclusions, about 110 nm in diameter. The boundaries between the organic and inorganic phases were very distinct in both cases. The Ag-modified samples also showed a prominent waving pattern in the packing of nanofibrils. The obtained BC gel films possessed water-holding capacity of about 62.35 g/g. However, the dried (to a constant mass) BC-films later exhibited a low water absorption capacity (3.82 g/g). It was found that decellularized BC samples had 2.4 times larger Young's modulus and 2.2 times greater tensile strength as compared to dehydrated native BC films. We presume that this was caused by molecular compaction of the BC structure.},
  language  = {en}
}
@article{HacklAndermahrStaatetal.2017,
  author    = {Hackl, M. and Andermahr, J. and Staat, Manfred and Bremer, I. and Borggrefe, J. and Prescher, A. and M{\"u}ller, L. P. and Wegmann, K.},
  title     = {Suture button reconstruction of the central band of the interosseous membrane in Essex-Lopresti lesions: a comparative biomechanical investigation},
  series = {The Journal of Hand Surgery (European Volume)},
  volume    = {42},
  journal   = {The Journal of Hand Surgery (European Volume)},
  number    = {4},
  publisher = {Sage},
  address   = {London},
  issn      = {2043-6289 (Online)},
  doi       = {10.1177/1753193416665943},
  pages     = {370 -- 376},
  year      = {2017},
  language  = {en}
}
@article{GoeddekeStrzodkaMohdYusofetal.2007,
  author    = {G{\"o}ddeke, Dominik and Strzodka, Robert and Mohd-Yusof, Jamaludin and McCormick, Patrick and Buijssen, Sven H.M. and Grajewski, Matthias and Turek, Stefan},
  title     = {Exploring weak scalability for FEM calculations on a GPU-enhanced cluster},
  series = {Parallel Computing},
  volume    = {33},
  journal   = {Parallel Computing},
  number    = {10-11},
  issn      = {0167-8191},
  doi       = {10.1016/j.parco.2007.09.002},
  pages     = {685 -- 699},
  year      = {2007},
  language  = {en}
}
@article{StulpeHellwig1993,
  author    = {Stulpe, Werner and Hellwig, K.-E.},
  title     = {A Classical Reformulation of Finite-Dimensional Quantum Mechanics. Hellwig, K.-E.; Stulpe, W.},
  series = {Quantum measurement, irreversibility and the physics of information / Symposium on the Foundations of Modern Physics 1993, Cologne, Germany 1 - 5 June 1993. Ed. Paul Busch},
  journal   = {Quantum measurement, irreversibility and the physics of information / Symposium on the Foundations of Modern Physics 1993, Cologne, Germany 1 - 5 June 1993. Ed. Paul Busch},
  publisher = {World Scientific},
  address   = {Singapore [u.a.]},
  isbn      = {981021507X},
  pages     = {209 -- 214},
  year      = {1993},
  language  = {en}
}
@article{Staat2001,
  author    = {Staat, Manfred},
  title     = {LISA - a European project for FEM-based limit and shakedown analysis},
  year      = {2001},
  abstract  = {The load-carrying capacity or the safety against plastic limit states are the central questions in the design of structures and passive components in the apparatus engineering. A precise answer is most simply given by limit and shakedown analysis. These methods can be based on static and kinematic theorems for lower and upper bound analysis. Both may be formulated as optimization problems for finite element discretizations of structures. The problems of large-scale analysis and the extension towards realistic material modelling will be solved in a European research project. Limit and shakedown analyses are briefly demonstrated with illustrative examples.},
  subject      = {Einspielen <Werkstoff>},
  language  = {en}
}
@article{TopcuMadabhushiStaat2022,
  author    = {Top{\c{c}}u, Murat and Madabhushi, Gopal S.P. and Staat, Manfred},
  title     = {A generalized shear-lag theory for elastic stress transfer between matrix and fibres having a variable radius},
  series = {International Journal of Solids and Structures},
  volume    = {239-240},
  journal   = {International Journal of Solids and Structures},
  number    = {Art. No. 111464},
  publisher = {Elsevier},
  address   = {New York, NY},
  issn      = {0020-7683},
  doi       = {10.1016/j.ijsolstr.2022.111464},
  year      = {2022},
  abstract  = {A generalized shear-lag theory for fibres with variable radius is developed to analyse elastic fibre/matrix stress transfer. The theory accounts for the reinforcement of biological composites, such as soft tissue and bone tissue, as well as for the reinforcement of technical composite materials, such as fibre-reinforced polymers (FRP). The original shear-lag theory proposed by Cox in 1952 is generalized for fibres with variable radius and with symmetric and asymmetric ends. Analytical solutions are derived for the distribution of axial and interfacial shear stress in cylindrical and elliptical fibres, as well as conical and paraboloidal fibres with asymmetric ends. Additionally, the distribution of axial and interfacial shear stress for conical and paraboloidal fibres with symmetric ends are numerically predicted. The results are compared with solutions from axisymmetric finite element models. A parameter study is performed, to investigate the suitability of alternative fibre geometries for use in FRP.},
  language  = {en}
}
@article{BhattaraiHorbachStaatetal.2022,
  author    = {Bhattarai, Aroj and Horbach, Andreas and Staat, Manfred and Kowalczyk, Wojciech and Tran, Thanh Ngoc},
  title     = {Virgin passive colon biomechanics and a literature review of active contraction constitutive models},
  series = {Biomechanics},
  volume    = {2},
  journal   = {Biomechanics},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2673-7078},
  doi       = {10.3390/biomechanics2020013},
  pages     = {138 -- 157},
  year      = {2022},
  abstract  = {The objective of this paper is to present our findings on the biomechanical aspects of the virgin passive anisotropic hyperelasticity of the porcine colon based on equibiaxial tensile experiments. Firstly, the characterization of the intestine tissues is discussed for a nearly incompressible hyperelastic fiber-reinforced Holzapfel-Gasser-Ogden constitutive model in virgin passive loading conditions. The stability of the evaluated material parameters is checked for the polyconvexity of the adopted strain energy function using positive eigenvalue constraints of the Hessian matrix with MATLAB. The constitutive material description of the intestine with two collagen fibers in the submucosal and muscular layer each has been implemented in the FORTRAN platform of the commercial finite element software LS-DYNA, and two equibiaxial tensile simulations are presented to validate the results with the optical strain images obtained from the experiments. Furthermore, this paper also reviews the existing models of the active smooth muscle cells, but these models have not been computationally studied here. The review part shows that the constitutive models originally developed for the active contraction of skeletal muscle based on Hill's three-element model, Murphy's four-state cross-bridge chemical kinetic model and Huxley's sliding-filament hypothesis, which are mainly used for arteries, are appropriate for numerical contraction numerical analysis of the large intestine.},
  language  = {en}
}
@article{AbelKahmannMellonetal.2020,
  author    = {Abel, Alexander and Kahmann, Stephanie Lucina and Mellon, Stephen and Staat, Manfred and Jung, Alexander},
  title     = {An open-source tool for the validation of finite element models using three-dimensional full-field measurements},
  series = {Medical Engineering \& Physics},
  volume    = {77},
  journal   = {Medical Engineering \& Physics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1350-4533},
  doi       = {10.1016/j.medengphy.2019.10.015},
  pages     = {125 -- 129},
  year      = {2020},
  abstract  = {Three-dimensional (3D) full-field measurements provide a comprehensive and accurate validation of finite element (FE) models. For the validation, the result of the model and measurements are compared based on two respective point-sets and this requires the point-sets to be registered in one coordinate system. Point-set registration is a non-convex optimization problem that has widely been solved by the ordinary iterative closest point algorithm. However, this approach necessitates a good initialization without which it easily returns a local optimum, i.e. an erroneous registration. The globally optimal iterative closest point (Go-ICP) algorithm has overcome this drawback and forms the basis for the presented open-source tool that can be used for the validation of FE models using 3D full-field measurements. The capability of the tool is demonstrated using an application example from the field of biomechanics. Methodological problems that arise in real-world data and the respective implemented solution approaches are discussed.},
  language  = {en}
}
@article{VoegeleGrajewskiGovorukhaetal.2020,
  author    = {V{\"o}gele, Stefan and Grajewski, Matthias and Govorukha, Kristina and R{\"u}bbelke, Dirk},
  title     = {Challenges for the European steel industry: Analysis, possible consequences and impacts on sustainable development},
  series = {Applied Energy},
  volume    = {264},
  journal   = {Applied Energy},
  number    = {Article number: 114633},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0306-2619},
  doi       = {10.1016/j.apenergy.2020.114633},
  year      = {2020},
  abstract  = {The steel industry in the European Union (EU), important for the economy as a whole, faces various challenges. These are inter alia volatile prices for relevant input factors, uncertainties concerning the regulation of CO₂-emissions and market shocks caused by the recently introduced additional import duties in the US, which is an important sales market. We examine primary and secondary effects of these challenges on the steel industry in the EU and their impacts on European and global level. Developing and using a suitable meta-model, we analyze the competitiveness of key steel producing countries with respect to floor prices depending on selected cost factors and draw conclusions on the impacts in the trade of steel on emissions, energy demand, on the involvement of developing countries in the value chain as well on the need for innovations to avoid relocations of production. Hence, our study contributes to the assessment of sustainable industrial development, which is aimed by the Sustainability Development Goal "Build resilient infrastructure, promote inclusive and sustainable industrialization and foster innovation countries". By applying information on country-specific Human Development Indexes (reflecting aspects of life expectancy, education, and per capita income), we show that relocating energy-intensive industries from the EU may not only increase global energy demand and CO₂-emissions, but may also be to the disadvantage of developing countries.},
  language  = {en}
}
@article{AndingTabazaStaatetal.2013,
  author    = {Anding, Ralf and Tabaza, Ruth and Staat, Manfred and Trenz, Eva and Lohmann, Philipp and Klinge, Uwe and Kirschner-Hermanns, Ruth},
  title     = {Introducing a method of in vitro testing of different anchoring systems used for female incontinence and prolapse surgery},
  series = {BioMed research international},
  volume    = {Vol. 2013},
  journal   = {BioMed research international},
  issn      = {1110-7251 (E-Journal); 2314-6141 (E-Journal); 1110-7243 (Print); 2314-6133 (Print)},
  pages     = {Article ID 401417},
  year      = {2013},
  language  = {en}
}
@article{HacklLeschingerStaatetal.2016,
  author    = {Hackl, Michael and Leschinger, T. and Staat, Manfred and M{\"u}ller, Lars-Peter and Wegmann, Kilian},
  title     = {Reconstruction of the interosseous membrane in the Essex Lopresti lesion — a biomechanical evaluation},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4080-7},
  pages     = {130 -- 131},
  year      = {2016},
  abstract  = {Surgical reconstruction of the interosseous membrane (IOM) could restore longitudinal forearm stability to avoid persisting disability due to capituloradial and ulnocarpal impingement in Essex Lopresti lesions. This biomechanical study aimed to assess longitudinal forearm stability of intact specimens, after sectioning of the IOM and after reconstruction with a TightRope construct using either a single or double bundle technique.},
  language  = {en}
}
@article{AkimbekovQiaoDigeletal.2020,
  author    = {Akimbekov, Nuraly S. and Qiao, Xiaohui and Digel, Ilya and Abdieva, Gulzhamal and Ualieva, Perizat and Zhubanova, Azhar},
  title     = {The effect of leonardite-derived amendments on soil microbiome structure and potato yield},
  series = {Agriculture},
  volume    = {10},
  journal   = {Agriculture},
  number    = {Art. 147},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/agriculture10050147},
  pages     = {1 -- 17},
  year      = {2020},
  abstract  = {Humic substances originating from various organic matters can ameliorate soil properties, stimulate plant growth, and improve nutrient uptake. Due to the low calorific heating value, leonardite is rather unsuitable as fuel. However, it may serve as a potential source of humic substances. This study was aimed at characterizing the leonardite-based soil amendments and examining the effect of their application on the soil microbial community, as well as on potato growth and tuber yield. A high yield (71.1\%) of humic acid (LHA) from leonardite has been demonstrated. Parental leonardite (PL) and LHA were applied to soil prior to potato cultivation. The 16S rRNA sequencing of soil samples revealed distinct relationships between microbial community composition and the application of leonardite-based soil amendments. Potato tubers were planted in pots in greenhouse conditions. The tubers were harvested at the mature stage for the determination of growth and yield parameters. The results demonstrated that the LHA treatments had a significant effect on increasing potato growth (54.9\%) and tuber yield (66.4\%) when compared to the control. The findings highlight the importance of amending leonardite-based humic products for maintaining the biogeochemical stability of soils, for keeping their healthy microbial community structure, and for increasing the agronomic productivity of potato plants.},
  language  = {en}
}
@article{KuehnHaugnerStaatetal.2004,
  author    = {K{\"u}hn, Raoul-Roman and Haugner, Werner and Staat, Manfred and Sponagel, Stefan},
  title     = {A Two Phase Mixture Model based on Bone Observation},
  year      = {2004},
  abstract  = {An optimization method is developed to describe the mechanical behaviour of the human cancellous bone. The method is based on a mixture theory. A careful observation of the behaviour of the bone material leads to the hypothesis that the bone density is controlled by the principal stress trajectories (Wolff's law). The basic idea of the developed method is the coupling of a scalar value via an eigenvalue problem to the principal stress trajectories. On the one hand this theory will permit a prediction of the reaction of the biological bone structure after the implantation of a prosthesis, on the other hand it may be useful in engineering optimization problems. An analytical example shows its efficiency.},
  subject      = {Knochen},
  language  = {en}
}
@article{WegmannHacklStaatetal.2016,
  author    = {Wegmann, Kilian and Hackl, Michael and Staat, Manfred and Mayer, Katharina and M{\"u}ller, Lars-Peter},
  title     = {Double plate osteosynthesis of proximal ulna fractures: biomechanical and clinical results},
  series = {Knee surgery, sports traumatology, arthroscopy},
  volume    = {Volume 24},
  journal   = {Knee surgery, sports traumatology, arthroscopy},
  number    = {Supplement 1},
  publisher = {Springer},
  address   = {Berlin},
  issn      = {0942-2056},
  doi       = {10.1007/s00167-016-4079-0},
  pages     = {58 -- 59},
  year      = {2016},
  abstract  = {While plate fixation of proximal ulna fractures might lead to superior clinical results compared to tension band wiring, regular plates represent an established risk factor for wound complications. The olecranon double plates (Medartis, Basel, CH) might decrease complications related to the osteosynthesis because of their low profile and better anatomical fit. This study aimed to evaluate the biomechanical performance and clinical results of the olecranon double plates.},
  language  = {en}
}
@article{JungStaatMueller2013,
  author    = {Jung, Alexander and Staat, Manfred and M{\"u}ller, Wolfram},
  title     = {Flight style optimization in ski jumping on normal, large, and ski flying hills},
  series = {Journal of biomechanics},
  volume    = {Vol. 47},
  journal   = {Journal of biomechanics},
  number    = {Iss. 3},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1873-2380 (E-Journal); 0021-9290 (Print)},
  pages     = {716 -- 722},
  year      = {2013},
  language  = {en}
}
@article{ArtmannDigelLinderetal.2008,
  author    = {Artmann, Gerhard and Digel, Ilya and Linder, Peter and Porst, Dariusz},
  title     = {Mechanism of haemoglobin sensing body temperature},
  series = {Tissue Engineering Part A. 14 (2008), H. 5},
  journal   = {Tissue Engineering Part A. 14 (2008), H. 5},
  isbn      = {1937-3341},
  pages     = {754 -- 754},
  year      = {2008},
  language  = {en}
}
@article{BronderPoghossianSchejaetal.2015,
  author    = {Bronder, Thomas and Poghossian, Arshak and Scheja, S. and Wu, Chunsheng and Keusgen, M. and Sch{\"o}ning, Michael Josef},
  title     = {Electrostatic Detection of Unlabelled Single- and Double-stranded DNA Using Capacitive Field-effect Devices Functionalized with a Positively Charged Polyelectrolyte Layer},
  series = {Procedia Engineering},
  volume    = {120},
  journal   = {Procedia Engineering},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1877-7058},
  doi       = {10.1016/j.proeng.2015.08.710},
  pages     = {544 -- 547},
  year      = {2015},
  abstract  = {Capacitive field-effect electrolyte-insulator-semiconductor sensors consisting of an Al-p-Si-SiO2 structure have been used for the electrical detection of unlabelled single- and double-stranded DNA (dsDNA) molecules by their intrinsic charge. A simple functionalization protocol based on the layer-by-layer (LbL) technique was used to prepare a weak polyelectrolyte/probe-DNA bilayer, followed by the hybridization with complementary target DNA molecules. Due to the flat orientation of the LbL-adsorbed DNA molecules, a high sensor signal has been achieved. In addition, direct label-free detection of in-solution hybridized dsDNA molecules has been studied.},
  language  = {en}
}
@article{PoghossianIngebrandtAbouzaretal.2007,
  author    = {Poghossian, Arshak and Ingebrandt, S. and Abouzar, Maryam H. and Sch{\"o}ning, Michael Josef},
  title     = {Label-free detection of charged macromolecules by using a field-effect-based sensor platform: Experiments and possible mechanisms of signal generation},
  series = {Applied Physics A: Materials Science \& Processing. 87 (2007), H. 3},
  journal   = {Applied Physics A: Materials Science \& Processing. 87 (2007), H. 3},
  isbn      = {0947-8396},
  pages     = {517 -- 524},
  year      = {2007},
  language  = {en}
}
@article{MolinnusSorichBartzetal.2016,
  author    = {Molinnus, Denise and Sorich, Maren and Bartz, Alexander and Siegert, Petra and Willenberg, Holger S. and Lisdat, Fred and Poghossian, Arshak and Keusgen, Michael and Sch{\"o}ning, Michael Josef},
  title     = {Towards an adrenaline biosensor based on substrate recycling amplification in combination with an enzyme logic gate},
  series = {Sensors and Actuators B: Chemical},
  volume    = {237},
  journal   = {Sensors and Actuators B: Chemical},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2016.06.064},
  pages     = {190 -- 195},
  year      = {2016},
  abstract  = {An amperometric biosensor using a substrate recycling principle was realized for the detection of low adrenaline concentrations (1 nM) by measurements in phosphate buffer and Ringer's solution at pH 6.5 and pH 7.4, respectively. In proof-of-concept experiments, a Boolean logic-gate principle has been applied to develop a digital adrenaline biosensor based on an enzyme AND logic gate. The obtained results demonstrate that the developed digital biosensor is capable for a rapid qualitative determination of the presence/absence of adrenaline in a YES/NO statement. Such digital biosensor could be used in clinical diagnostics for the control of a correct insertion of a catheter in the adrenal veins during adrenal venous-sampling procedure.},
  language  = {en}
}
@article{PoghossianKatzSchoening2015,
  author    = {Poghossian, Arshak and Katz, Evgeny and Sch{\"o}ning, Michael Josef},
  title     = {Enzyme logic AND-Reset and OR-Reset gates based on a field-effect electronic transducer modified with multi-enzyme membrane},
  series = {Chemical Communications},
  volume    = {51},
  journal   = {Chemical Communications},
  publisher = {Royal Society of Chemistry (RSC)},
  address   = {Cambridge},
  doi       = {10.1039/C5CC01362C},
  pages     = {6564 -- 6567},
  year      = {2015},
  abstract  = {Capacitive field-effect sensors modified with a multi-enzyme membrane have been applied for an electronic transduction of biochemical signals processed by enzyme-based AND-Reset and OR-Reset logic gates. The local pH change at the sensor surface induced by the enzymatic reaction was used for the activation of the Reset function for the first time.},
  language  = {en}
}
@article{AbouzarPoghossianRazavietal.2009,
  author    = {Abouzar, Maryam H. and Poghossian, Arshak and Razavi, A. and Williams, O. A. and Bijnens, N. and Wagner, P. and Sch{\"o}ning, Michael Josef},
  title     = {Characterisation of capacitive field-effect sensors with a nanocrystalline-diamond film as transducer material for multi-parameter sensing},
  series = {Biosensors and Bioelectronics. 24 (2009), H. 5},
  journal   = {Biosensors and Bioelectronics. 24 (2009), H. 5},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0956-5663},
  pages     = {1298 -- 1304},
  year      = {2009},
  language  = {en}
}
@article{TurekKeusgenPoghossianetal.2008,
  author    = {Turek, M. and Keusgen, M. and Poghossian, Arshak and Mulchandani, A. and Wang, J. and Sch{\"o}ning, Michael Josef},
  title     = {Enzyme-modified electrolyte-insulator-semiconductor sensors},
  series = {Journal of Contemporary Physics. 43 (2008), H. 2},
  journal   = {Journal of Contemporary Physics. 43 (2008), H. 2},
  isbn      = {1934-9378},
  pages     = {82 -- 85},
  year      = {2008},
  language  = {en}
}
@article{PoghossianIngebrandtYeungetal.2004,
  author    = {Poghossian, Arshak and Ingebrandt, S. and Yeung, C.-K. and Offenh{\"a}usser, A. and Sch{\"o}ning, Michael Josef},
  title     = {Microsensors based on ion-sensitive field-effect transistors for biomedical applications},
  series = {Biomedizinische Technik. 49 (2004), H. 2},
  journal   = {Biomedizinische Technik. 49 (2004), H. 2},
  isbn      = {0932-4666},
  pages     = {1036 -- 1037},
  year      = {2004},
  language  = {en}
}
@article{BaeckerBegingBisellietal.2009,
  author    = {B{\"a}cker, Matthias and Beging, Stefan and Biselli, Manfred and Poghossian, Arshak and Wang, J. and Zang, Werner and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Concept for a solid-state multi-parameter sensor system for cell-culture monitoring},
  series = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  journal   = {Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {0013-4686},
  pages     = {6107 -- 6112},
  year      = {2009},
  language  = {en}
}
@article{BuniatyanMatirosyanAbouzaretal.2009,
  author    = {Buniatyan, Vahe V. and Matirosyan, N. and Abouzar, Maryam H. and Schubert, J. and Zander, W. and Gevorgian, S. and Sch{\"o}ning, Michael Josef and Poghossian, Arshak},
  title     = {Capacitive field-effect pH sensor based on an electrolyte-ferroelectric-insulator-semiconductor structure},
  series = {SENSOR 2009 : : 14th International Conference on Sensors, Technologies, Electronics and Applications; N{\"u}rnberg, Germany, 26 - 28 May 2009; proceedings; [part of] Sensor + Test Conference 2009 / AMA, Fachverband f{\"u}r Sensorik e.V},
  journal   = {SENSOR 2009 : : 14th International Conference on Sensors, Technologies, Electronics and Applications; N{\"u}rnberg, Germany, 26 - 28 May 2009; proceedings; [part of] Sensor + Test Conference 2009 / AMA, Fachverband f{\"u}r Sensorik e.V},
  publisher = {AMA Service},
  address   = {Wunstorf},
  isbn      = {9783981099355},
  pages     = {317 -- 322},
  year      = {2009},
  language  = {en}
}
@article{PoghossianBerndsenSchoening2003,
  author    = {Poghossian, Arshak and Berndsen, Lars and Sch{\"o}ning, Michael Josef},
  title     = {Chemical sensor as physical sensor: ISFET-based flowvelocity, flow-direction and diffusion-coefficient sensor},
  series = {Sensors and Actuators B. 95 (2003), H. 1-3},
  journal   = {Sensors and Actuators B. 95 (2003), H. 1-3},
  isbn      = {0925-4005},
  pages     = {384 -- 390},
  year      = {2003},
  language  = {en}
}
@article{DigelMaggakisKelemenZerlinetal.2006,
  author    = {Digel, Ilya and Maggakis-Kelemen, Christina and Zerlin, Kay and Linder, Peter},
  title     = {Body temperature-related structural transitions of monotremal and human hemoglobin},
  series = {Biophysical Journal. 91 (2006), H. 8},
  journal   = {Biophysical Journal. 91 (2006), H. 8},
  isbn      = {1542-0086},
  pages     = {3014 -- 3021},
  year      = {2006},
  language  = {en}
}
@article{PoghossianWagnerSchoening2011,
  author    = {Poghossian, Arshak and Wagner, Holger and Sch{\"o}ning, Michael Josef},
  title     = {Functional testing and characterisation of (bio-)chemical sensors on wafer level},
  series = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  journal   = {Sensors and Actuators B: Chemical. 154 (2011), H. 2},
  publisher = {Elsevier},
  address   = {Amsterdam},
  isbn      = {1873-3077},
  pages     = {169 -- 173},
  year      = {2011},
  language  = {en}
}
@article{PoghossianBerndsenSchultzeetal.2001,
  author    = {Poghossian, Arshak and Berndsen, L. and Schultze, J. W. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {„High order" hybrid sensor module based on an identical transducer principle},
  series = {Chemical and biological sensors and analytical methods : proceedings of the international symposium / Sensor, Physical Electrochemistry, and Organic and Biological Electrochemistry Divisions. Ed.: M. Butler},
  journal   = {Chemical and biological sensors and analytical methods : proceedings of the international symposium / Sensor, Physical Electrochemistry, and Organic and Biological Electrochemistry Divisions. Ed.: M. Butler},
  publisher = {Electrochemical Society},
  address   = {Pennington, NJ},
  isbn      = {1-56677-351-2},
  pages     = {143 -- 152},
  year      = {2001},
  language  = {en}
}
@article{PoghossianThustSchrothetal.2001,
  author    = {Poghossian, Arshak and Thust, M. and Schroth, P. and Steffen, A. and L{\"u}th, H. and Sch{\"o}ning, Michael Josef},
  title     = {Penicillin detection by means of silicon-based field-effect structures},
  series = {Sensors and Materials. 13 (2001), H. 4},
  journal   = {Sensors and Materials. 13 (2001), H. 4},
  isbn      = {0392-2510},
  pages     = {207 -- 223},
  year      = {2001},
  language  = {en}
}
@article{TranTrinhDaoetal.2022,
  author    = {Tran, Ngoc Trinh and Trinh, Tu Luc and Dao, Ngoc Tien and Giap, Van Tan and Truong, Manh Khuyen and Dinh, Thuy Ha and Staat, Manfred},
  title     = {FEM shakedown analysis of structures under random strength with chance constrained programming},
  series = {Vietnam Journal of Mechanics},
  volume    = {44},
  journal   = {Vietnam Journal of Mechanics},
  number    = {4},
  publisher = {Vietnam Academy of Science and Technology (VAST)},
  issn      = {0866-7136},
  doi       = {10.15625/0866-7136/17943},
  pages     = {459 -- 473},
  year      = {2022},
  abstract  = {Direct methods, comprising limit and shakedown analysis, are a branch of computational mechanics. They play a significant role in mechanical and civil engineering design. The concept of direct methods aims to determine the ultimate load carrying capacity of structures beyond the elastic range. In practical problems, the direct methods lead to nonlinear convex optimization problems with a large number of variables and constraints. If strength and loading are random quantities, the shakedown analysis can be formulated as stochastic programming problem. In this paper, a method called chance constrained programming is presented, which is an effective method of stochastic programming to solve shakedown analysis problems under random conditions of strength. In this study, the loading is deterministic, and the strength is a normally or lognormally distributed variable.},
  language  = {en}
}
@article{BaeckerPoghossianAbouzaretal.2010,
  author    = {B{\"a}cker, Matthias and Poghossian, Arshak and Abouzar, Maryam H. and Wenmackers, Sylvia and Janssens, Stoffel D. and Haenen, Ken and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Capacitive field-effect (bio-)chemical sensors based on nanocrystalline diamond films},
  series = {Diamond Electronics and Bioelectronics — Fundamentals to Applications III, edited by P. Bergonzo, [u.a.]},
  journal   = {Diamond Electronics and Bioelectronics — Fundamentals to Applications III, edited by P. Bergonzo, [u.a.]},
  pages     = {1 -- 6},
  year      = {2010},
  language  = {en}
}
@article{ZerlinKasischkeDigeletal.2007,
  author    = {Zerlin, Kay and Kasischke, Nicole and Digel, Ilya and Maggakis-Kelemen, Christina and Temiz Artmann, Ayseg{\"u}l and Porst, Dariusz and Kayser, Peter and Linder, Peter and Artmann, Gerhard},
  title     = {Structural transition temperature of hemoglobins correlates with species' body temperature},
  series = {European Biophysics Journal. 37 (2007), H. 1},
  journal   = {European Biophysics Journal. 37 (2007), H. 1},
  isbn      = {1432-1017},
  pages     = {1 -- 10},
  year      = {2007},
  language  = {en}
}
@article{LaackRefisch1989,
  author    = {Laack, Walter van and Refisch, A.},
  title     = {Neuralgic amyotrophy of the lumbar area. Case Report / Refisch, A. ; Laack, W. van},
  series = {Archives of Orthopaedic and Trauma Surgery. 108 (1989), H. 5},
  journal   = {Archives of Orthopaedic and Trauma Surgery. 108 (1989), H. 5},
  isbn      = {0936-8051},
  pages     = {329 -- 332},
  year      = {1989},
  language  = {en}
}
@article{Digel2011,
  author    = {Digel, Ilya},
  title     = {Primary thermosensory events in cells},
  series = {Transient receptor potential channels / Md. Shahidul Islam, ed.},
  journal   = {Transient receptor potential channels / Md. Shahidul Islam, ed.},
  publisher = {Springer},
  address   = {Dordrecht [u.a.]},
  isbn      = {978-94-007-0264-6},
  pages     = {451 -- 468},
  year      = {2011},
  language  = {en}
}
@article{SchoeningNaetherAugeretal.2005,
  author    = {Sch{\"o}ning, Michael Josef and N{\"a}ther, Niko and Auger, V. and Poghossian, Arshak and Koudelka-Hep, M.},
  title     = {Miniaturised flow-through cell with integrated capacitive EIS sensor fabricated at wafer level using Si and SU-8 technologies},
  series = {Sensors and Actuators B. 108 (2005), H. 1-2},
  journal   = {Sensors and Actuators B. 108 (2005), H. 1-2},
  isbn      = {0925-4005},
  pages     = {986 -- 992},
  year      = {2005},
  language  = {en}
}
@article{JablonskiPoghossianKeusgenetal.2021,
  author    = {Jablonski, Melanie and Poghossian, Arshak and Keusgen, Michael and Wege, Christina and Sch{\"o}ning, Michael Josef},
  title     = {Detection of plant virus particles with a capacitive field-effect sensor},
  series = {Analytical and Bioanalytical Chemistry},
  volume    = {413},
  journal   = {Analytical and Bioanalytical Chemistry},
  publisher = {Springer Nature},
  address   = {Cham},
  issn      = {1618-2650},
  doi       = {10.1007/s00216-021-03448-8},
  pages     = {5669 -- 5678},
  year      = {2021},
  abstract  = {Plant viruses are major contributors to crop losses and induce high economic costs worldwide. For reliable, on-site and early detection of plant viral diseases, portable biosensors are of great interest. In this study, a field-effect SiO2-gate electrolyte-insulator-semiconductor (EIS) sensor was utilized for the label-free electrostatic detection of tobacco mosaic virus (TMV) particles as a model plant pathogen. The capacitive EIS sensor has been characterized regarding its TMV sensitivity by means of constant-capacitance method. The EIS sensor was able to detect biotinylated TMV particles from a solution with a TMV concentration as low as 0.025 nM. A good correlation between the registered EIS sensor signal and the density of adsorbed TMV particles assessed from scanning electron microscopy images of the SiO2-gate chip surface was observed. Additionally, the isoelectric point of the biotinylated TMV particles was determined via zeta potential measurements and the influence of ionic strength of the measurement solution on the TMV-modified EIS sensor signal has been studied.},
  language  = {en}
}
@article{PoghossianSchoening2021,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef},
  title     = {Recent progress in silicon-based biologically sensitive field-effect devices},
  series = {Current Opinion in Electrochemistry},
  journal   = {Current Opinion in Electrochemistry},
  number    = {Article number: 100811},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2451-9103},
  doi       = {10.1016/j.coelec.2021.100811},
  year      = {2021},
  abstract  = {Biologically sensitive field-effect devices (BioFEDs) advantageously combine the electronic field-effect functionality with the (bio)chemical receptor's recognition ability for (bio)chemical sensing. In this review, basic and widely applied device concepts of silicon-based BioFEDs (ion-sensitive field-effect transistor, silicon nanowire transistor, electrolyte-insulator-semiconductor capacitor, light-addressable potentiometric sensor) are presented and recent progress (from 2019 to early 2021) is discussed. One of the main advantages of BioFEDs is the label-free sensing principle enabling to detect a large variety of biomolecules and bioparticles by their intrinsic charge. The review encompasses applications of BioFEDs for the label-free electrical detection of clinically relevant protein biomarkers, deoxyribonucleic acid molecules and viruses, enzyme-substrate reactions as well as recording of the cell acidification rate (as an indicator of cellular metabolism) and the extracellular potential.},
  language  = {en}
}
@article{PoghossianSchoeningSchrothetal.2001,
  author    = {Poghossian, Arshak and Sch{\"o}ning, Michael Josef and Schroth, P. and Simonis, A. and L{\"u}th, H.},
  title     = {An ISFET-based penicillin sensor with high sensitivity, low detection limit and long lifetime},
  series = {Sensors and Actuators B. 76 (2001), H. 1-3},
  journal   = {Sensors and Actuators B. 76 (2001), H. 1-3},
  isbn      = {0925-4005},
  pages     = {519 -- 526},
  year      = {2001},
  language  = {en}
}
@article{HuckSchiffelsHerreraetal.2013,
  author    = {Huck, Christina and Schiffels, Johannes and Herrera, Cony N. and Schelden, Maximilian and Selmer, Thorsten and Poghossian, Arshak and Baumann, Marcus and Wagner, Patrick and Sch{\"o}ning, Michael Josef},
  title     = {Metabolic responses of Escherichia coli upon glucose pulses captured by a capacitive field-effect sensor},
  series = {Physica Status Solidi (A)},
  volume    = {210},
  journal   = {Physica Status Solidi (A)},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0031-8965},
  doi       = {10.1002/pssa.201200900},
  pages     = {926 -- 931},
  year      = {2013},
  abstract  = {Living cells are complex biological systems transforming metabolites taken up from the surrounding medium. Monitoring the responses of such cells to certain substrate concentrations is a challenging task and offers possibilities to gain insight into the vitality of a community influenced by the growth environment. Cell-based sensors represent a promising platform for monitoring the metabolic activity and thus, the "welfare" of relevant organisms. In the present study, metabolic responses of the model bacterium Escherichia coli in suspension, layered onto a capacitive field-effect structure, were examined to pulses of glucose in the concentration range between 0.05 and 2 mM. It was found that acidification of the surrounding medium takes place immediately after glucose addition and follows Michaelis-Menten kinetic behavior as a function of the glucose concentration. In future, the presented setup can, therefore, be used to study substrate specificities on the enzymatic level and may as well be used to perform investigations of more complex metabolic responses. Conclusions and perspectives highlighting this system are discussed.},
  language  = {en}
}
@article{SiqueiraWernerBaeckeretal.2009,
  author    = {Siqueira, Jose R. and Werner, Frederik and B{\"a}cker, Matthias and Poghossian, Arshak and Zucolotto, Valtencir and Oliveira, Osvaldo N. Jr. and Sch{\"o}ning, Michael Josef},
  title     = {Layer-by-Layer Assembly of Carbon Nanotubes Incorporated in Light-Addressable Potentiometric Sensors},
  series = {Journal of Physical Chemistry C. 113 (2009), H. 33},
  journal   = {Journal of Physical Chemistry C. 113 (2009), H. 33},
  publisher = {American Chemical Society},
  address   = {Washington, DC},
  isbn      = {1932-7455},
  pages     = {14765 -- 14770},
  year      = {2009},
  language  = {en}
}
@article{SchoeningBrinkmannRolkaetal.2005,
  author    = {Sch{\"o}ning, Michael Josef and Brinkmann, D. and Rolka, David and Demuth, C. and Poghossian, Arshak},
  title     = {CIP (cleaning-in-place) suitable "non-glass" pH sensor based on a Ta2O5-gate EIS structure},
  series = {Sensors and Actuators B: Chemical. 111-112 (2005)},
  journal   = {Sensors and Actuators B: Chemical. 111-112 (2005)},
  isbn      = {0925-4005},
  pages     = {423 -- 429},
  year      = {2005},
  language  = {en}
}
@article{TranStaat2013,
  author    = {Tran, Thanh Ngoc and Staat, Manfred},
  title     = {An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties},
  series = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  journal   = {Limit State of Materials and Structures : Direct Methods 2. Saxc{\´e}, G{\´e}ry de (Hrsg.)},
  publisher = {Springer},
  address   = {Dordrecht},
  isbn      = {978-94-007-5424-9},
  pages     = {89 -- 102},
  year      = {2013},
  language  = {en}
}
@article{Digel2008,
  author    = {Digel, Ilya},
  title     = {Controlling microbial adhesion : a surface engineering approach},
  series = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  journal   = {Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)},
  publisher = {Springer},
  address   = {Berlin [u.a.]},
  isbn      = {978-3-540-75408-4},
  pages     = {601 -- 625},
  year      = {2008},
  language  = {en}
}
@article{PoghossianWernerBuniatyanetal.2017,
  author    = {Poghossian, Arshak and Werner, Frederik and Buniatyan, V. V. and Wagner, Torsten and Miamoto, K. and Yoshinobu, T. and Sch{\"o}ning, Michael Josef},
  title     = {Towards addressability of light-addressable potentiometric sensors: Shunting effect of non-illuminated region and cross-talk},
  series = {Sensor and Actuators B: Chemical},
  journal   = {Sensor and Actuators B: Chemical},
  number    = {244},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2017.01.047},
  pages     = {1071 -- 1079},
  year      = {2017},
  abstract  = {The LAPS (light-addressable potentiometric sensor) platform is one of the most attractive approaches for chemical and biological sensing with many applications ranging from pH and ion/analyte concentration measurements up to cell metabolism detection and chemical imaging. However, although it is generally accepted that LAPS measurements are spatially resolved, the light-addressability feature of LAPS devices has not been discussed in detail so far. In this work, an extended electrical equivalent-circuit model of the LAPS has been presented, which takes into account possible cross-talk effects due to the capacitive coupling of the non-illuminated region. A shunting effect of the non-illuminated area on the measured photocurrent and addressability of LAPS devices has been studied. It has been shown, that the measured photocurrent will be determined not only by the local interfacial potential in the illuminated region but also by possible interfacial potential changes in the non-illuminated region, yielding cross-talk effects. These findings were supported by the experimental investigations of a penicillin-sensitive multi-spot LAPS and a metal-insulator-semiconductor LAPS as model systems.},
  language  = {en}
}
@article{HasanKeilStaatetal.2012,
  author    = {Hasan, Istabrak and Keil, Ludger and Staat, Manfred and Wahl, Gerhard and Bourauel, Christoph},
  title     = {Determination of the frictional coefficient of the implant-antler interface : experimental approach},
  series = {Biomedical Engineering / Biomedizinische Technik},
  volume    = {57},
  journal   = {Biomedical Engineering / Biomedizinische Technik},
  number    = {5},
  publisher = {De Gruyter},
  address   = {Berlin},
  issn      = {1862-278X},
  pages     = {359 -- 363},
  year      = {2012},
  abstract  = {The similar bone structure of reindeer antler to human bone permits studying the osseointegration of dental implants in the jawbone. As the friction is one of the major factors that have a significant influence on the initial stability of immediately loaded dental implants, it is essential to define the frictional coefficient of the implant-antler interface. In this study, the kinetic frictional forces at the implant-antler interface were measured experimentally using an optomechanical setup and a stepping motor controller under different axial loads and sliding velocities. The corresponding mean values of the static and kinetic frictional coefficients were within the range of 0.5-0.7 and 0.3-0.5, respectively. An increase in the frictional forces with increasing applied axial loads was registered. The measurements showed an evidence of a decrease in the magnitude of the frictional coefficient with increasing sliding velocity. The results of this study provide a considerable assessment to clarify the suitable frictional coefficient to be used in the finite element contact analysis of antler specimens.},
  language  = {en}
}